12 best guitar with stand straps

Product description

Our best seller combines our special formula velveteen rubber and thickest tubing. A great value for such a high quality stand! Features include a removable lower stepped yoke and a security strap on the upper yoke. This is a 2-Pack of XCG4's.

• Flush end caps to protect your instrument
• Security strap
• Black velveteen rubber
• Matte black powder coat finish
• 17mm tubing (top section)

User questions & answers

Question:	Does the bottom yoke have padding or is it just metal
Answer:	Try reattaching the white wire (if you have enough of it left, strip both ends, twist, optionally solder, and tape it). Mine did the same thing-- the wires were reversed from the instructions. Cutting the green wire got rid of the lines.
Question:	Just got mine. Is there a screw for arms supporting the bottom of the guitar? The arms can slip off
Answer:	Hello, friend! Thank you for your inquiry. The back up camera that outputs an analog video signal. If your factory navigation screen system supports analog signal input, the car rear view camera can be installed to vehicle with factory navigation screen with no back up camera.
Question:	It won't assemble, are there instructions available? The cradle wobbles and will not stay in place amd there's no way to keep the neck in place
Answer:	The car cam connector is 4 pin.
Question:	will this damage nitrocellulose-finish guitars
Answer:	The wire guage on this camera is very small, and the draw on the camera is certainly very low (especially because it does not have IR LEDs). Also, the reverse light/taillight circuits are already fuse protected and with much beefier wire. Considering the draw on this is probably ~500ma, you might want a 1.5A fuse, although because of the thin wire, this may or may not exceed the current capacity of the wire, thus defeating the purpose. If you are dead set on fusing this I would maybe start at 500ma and be prepared to move up to 1A? But fusing it is not needed.

Product features

On-Stage XCG4

A great value! On-Stage's combines a special formula velveteen rubber with extra thick tubing. It features a removable lower stepped yoke, security strap on the upper yoke, and adjustable height. Perfect for any guitar. Founded on a promise of affordability, durability and innovation, On-Stage Stands products are used everyday in studios, showrooms, and on stages everywhere. Over the years, the brand has grown to include over 300 products in 8 different categories.

Product description

The GS-100 is our most popular guitar stand. This feature loaded stand is height adjustable, features our patented leg locking system, and features a wide yoke that narrows to allow you to easily place any number of necks comfortably. The rubber safety strap provides added protection for your instrument , while the fabric covered legs are designed to protect the finish of your Electric, acoustic, or bass guitar.

The first series of guitar stands that deliver true innovation and musician-helpful features, the Genesis Series from Ultimate Support all offer a patented leg-locking system for stability, protective padding that won't inherently damage the finish on your guitar, and handy guitar pick storage slots. Whether you're looking for a quality stand for your acoustic, electric, or bass guitar, or even your favorite combo amp, there's a Genesis Series stand from Ultimate Support for you!

• Hanging-style Security Yoke
• Height-adjustable Guitar Stand
• Stable and Portable
• Friendly To Your Guitar's Finish
• Patented Leg Locking System

User questions & answers

Question:	Will an Ibanez electric guitar fit in this stand
Answer:	I have a Pyle PLCM4378 WIR license plate mount and the hitch is as clear as if you were standing looking at it! Easy install also.
Question:	Will this hold exotic shaped guitars such as the jackson warrior or king v without causing damage
Answer:	Hi, unfortunately no. It can only provide video. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PLCM4378WIR for more details. Thank you.
Question:	What is the length when folded up? And is the neck part adjustable in length
Answer:	USA car license plate mounting holes are 7 inches a part so if yours are farther apart you need adapter. Amazon has a Universal European adapter license frame. Check that out.
Question:	Is it safe for a Gibson with the nitrocellulose lacquer finish or will the rubber eat into it
Answer:	Their is only one receptacle on the monitor for the camera plug in and it is not USB so i don't know how you could connect another camera!

Product features

Genesis Series GS-100

The GS-100 is our most popular guitar stand. This feature loaded stand is height adjustable, features our patented leg locking system, and features a wide yoke that narrows to allow you to easily place any number of necks comfortably. The rubber safety strap provides added protection for your instrument , while the fabric covered legs are designed to protect the finish of your Electric, acoustic, or bass guitar.

Genesis Series Guitar Stands from Ultimate Support

Genesis Series guitar stands from Ultimate Support deliver innovative features and performance in a road ready package. Each model offers our patented leg-locking system for stability. The protective padding on the legs is designed to prevent damage to the finish on your guitar. Whether you’re looking for a quality stand for your acoustic, electric, bass guitar, or even your favorite combo amp; there’s a Genesis Series stand for you!

Safety Strap

The GS-100 features a safety strap that folds out of the way when not in use. When in use, safety strap folds over guitar and secures it.

Height-Adjustable

Easily adjust the height of your stand to fit electric, acoustic or electric bass guitars.

Protective Padding

Protective on the legs won’t harm your guitar’s finish (although a high quality case is always recommended for long-term storage).

• Guitar Stand - Universal Folding Guitar Stand.Sturdy,lightweight,protective A-frame stand
• Guitar Tuner - Highly accurate tuner with chromatic and guitar modes.Rotates 360°.Comes with batteries and ready to use
• Guitar Strap - Comfortable,the ends with 3 Pick Holders,100% Soft Cotton Strap(Coffee). Adjustable length for adults and children (max: 61 Inches). For Bass Electric & Acoustic Guitars
• Guitar Capo and Guitar Cord - Easy grip,zinc-alloy capo with tight rubber grip (wood grain),10-feet guitar cord for Bass,Guitar&Electric Guitar
• Guitar Picks and Holder - 3 guitar picks - 0.46mm*2,0.71mm*1,a pick holder

User questions & answers

Question:

will the stand work for an acoustic guitar, it says for a bass

Answer:

When someone says, damage a nitro finish, it can mean one of two things. Primarily what people mean is will it REACT with a nitro finish? With this stand I can't say, but I've noticed no marks when -directly- left on the stand for a week or two. I don't recommend ANY nitro finish guitar be left directly on ANY stand as a normal way of storing guitar when not playing...EVER. The reason, I have had a nitro finish react with a stand. What that does is the foam and nitro begin to interact turning the finish that makes contact with the foam a soft lumpy bump. It will harden once taken off...but the damage is done. Place a hand towel across the base of the stand if you intend to leave the guitar out on a stand. I leave one or two guitars out on stands all the time, makes grabbing and playing much easier, but I learned my lesson about any finish making contact with foam. Especially nitro. About the NECK REST portion of the stand...cover that too. Nitro or poly, it's going to leave a mark over time. Drape a small towel over it...or use the strap like I do. These are VERY GOOD stands...I have 5 of them and they are used for guitars and basses that cost a $300 to over $3K. They're as sturdy as the design can be, but if you've got a rowdy pet or small kids....use the case. Never seen a stand designed yet that can stand up to that.

Product features

Guitar Stand and Accessories Set

This set in clude 9 pieces accessories.

• A guitar stand,sui for Guitar and Bass
• A guitar strap
• A guitar capo
• A tuner
• A 10-feet guitar cord
• Three pieces of picks and a holder

• 0.35 in thicker padding and larger front pocket than previous version.Really worth the price!
• 42.1 x 16.3 x 4.7 inch, compatible with 39/40/41 inch acoustic & classical guitars
• Soft bag with waterproof oxford cloth exterior
• Dual adjustable shoulder straps + three handles for convenience. This new version guitar bag with back hanger loop can be hung on the wall for decoration.
• Two exterior pouches: one on front body and one on neck; can fit sheet music, documents, music books, accessories (pedals, adapters, cables, tuners, etc.)

User questions & answers

Question:	How good is the quality
Answer:	Zippers, pockets, finish and size are all good quality. Material is tough. There are a few innovative elements like the non-skid rubber foot and placement of the handle at the midpoint that make it easy to maneuver the guitar once loaded. The shoulder straps are nice if your walking and need to carry something in addition to the guitar. The padding is minimally adequate. That's not a quality issue. It's an economy issue. I only paid $16. My guitar fits perfectly - shallow bowl Adams style model
Question:	Is this gig bag suitable for an electric guitar
Answer:	I think an electric guitar would not be snug in this case. It is large enough for an acoustic guitar, which is much thicker than an electric.
Question:	Does this fit an archtop jazz guitar
Answer:	From images I have seen on the web, the archtop jazz guitar looks shallower than a dreadnought acoustic. Measure the overall length. If it's less than 41 inches, you're probably good to go.
Question:	Does this come in a large flat box or is it rolled or folded in a smaller box
Answer:	It comes folded in a small box.

Product features

Upgraded Version---Thicker Padding and Larger Pocket!

Padding/Thickness:

• Upgraded Version: 0.35 in. Padding
• Old Version: 0.20 in. Padding
• Others: 0.15 in Padding

Larger Front Pocket:

• Upgraded Version: 9.8 x 14.5 in. Big enough for some 12 in x 9 in music books
• Old Version: 9.44 x 12.2 in.

Upgraded Version---Larger Size!

Larger size guitar case gig bag:

• Upgraded Version: 42.1 x 16.3 x 4.7 inches
• Old Version: 41.3 x 16.5 x 4.7 inches
• Suitable for: Martin D-35,Martin X,Cordoba C5 Classical, ES 335 Semi hollowbody, Fender CC-60S, Fender Sororan SCE, Franciscan CS-9 dreadnought, full-size Epiphone PRO-1 Classic, Ibanez Gio, Jasmine S-35,Yamaha Dreadnought, Yamaha FG800, Yamaha XG 800C, Full Size Jazz Guitar, etc.

Note: This updated guitar bag is a little tight fit for a full size Acoustic Guitar.

If you want a larger one, we recommend you to buy our CAHAYA Upgraded Premium Guitar Bags.

New Version with Loop Handle

• This new version guitar bag with back hanger loop can be hung on the wall for decoration.
• Perfect for slat wall display!

Features:

• Thicker padding for more protection.
• Zippered accessory pockets.
• Waterproof and ultra-durable oxford cloth.
• Shockproof rubber bottom.

Light-weight and Convenient to Carry

• Dual adjustable shoulder strap.
• Ultra-light guitar case for>

• Guitar Hanger:Wood log rectangular base,deep cradle design with anti-skid soft rubber jacket,rubber ring lock,suitable for Acoustic Guitar,Electric Guitar,Bass,Ukulele,Banjo,violins
• Guitar Strap:Comfortable,the ends with 3 Pick Holders,100% Soft Cotton Strap(Coffee). Adjustable length for adults and children (max: 61 Inches). For Bass Electric & Acoustic Guitar
• Guitar Tuner:Accurate tuner with chromatic and guitar modes.Rotates 360°.Comes with batteries and ready to use
• Guitar Capo: Easy grip,zinc-alloy capo with tight rubber grip (wood grain)
• Practical and comfortable products,economy and solid durable

Product description

Stagg Black Tripod Guitar Stand with Folding Legs

• Tripod guitar stand (Black)
• Height Range: 25.6 to 27.6 inches
• Sturdy Tubular Stand
• Folds up for easy transport
• Neck fork w/ safety strip

User questions & answers

Question:	Does the lower U-shaped part of the stand lock horizontally? The one I currently have from a different mfr swivels and risks letting the guitar slip
Answer:	the two spring like holders will hold the open book in place
Question:	Does it work for a standard regular electric bass guitar? The title seems to suggest it is made specifically for Stagg
Answer:	No. There is an adjustable rod in the back that allows you to set the desired angle of the stand.
Question:	Can it be used for an Acoustic guitar
Answer:	39” when fully open.

Product description

An Amazon Brand

• Convenient guitar strap for an electric, acoustic, or bass guitar
• Length can be easily adjusted to ensure customized comfort
• Clever design includes integrated slots for holding up to 3 guitar picks at a time
• Durable construction for reliable use; choice of stylish color
• Measures 61 by 2 inches; backed by an Amazon Basics 1-year limited warranty

User questions & answers

Question:	Where is this made and what is it made out of? Thank you
Answer:	Yes the capo will work on junior guitars but it’ll be slightly oversized
Question:	How short can it be set to? My kid is 7 and needs a strap for his SG
Answer:	The more you close it's legs, the taller it gets, just like a human.
Question:	Can this strap be used for a banjo
Answer:	Don’t extend the legs to full spread and it should work

Product description

NOT YOUR “TYPICAL” GUITAR HANGER Unlike the typical guitar hangers found in the market, with unkown origin and quality that potentially puts even the finest guitars like Yamaha, Jackson, Fender and Ibanez in “life threatening” danger, the STRING SWING GUITAR HANGERS are CERTIFIED 100% MADE IN USA with REAL AMERICAN HARDWOOD and backed by a LIFETIME STRUCTURAL WARRANTY, all that to provide maximum structural integrity and safety, so no matter if you are playing your instruments or not, they are always in the “right hands” No matter what kind of guitar that you have, you can count on us to keep it safely stored, we have been crafting the best musical-instrument hangers and display systems that you can buy for OVER 30 YEARS; Our products are manufactured in Wisconsin, where we started, and are guaranteed for life Get your STRING SWING GUITAR HANGERS and keep your guitar safely stored; Add to cart Now while supplies last!

• ✔THE #1 SELLING String Swing CC01K guitar hanger bundled with our Guitar Keeper Strap protects your guitar from being pulled out of the hanger - Works great for guitarists with children or pets that may bump or try to grab your guitar. No moving parts (for safety strap) unlike auto grip hangers, which will break over time and potentially drop your guitar - Our Keeper Strap along with our deep U shape cradle, will ensure your guitar will never fall out
• ✔GUITARS ARE MORE THAN JUST INSTRUMENTS – While safer when transported inside a case along with your picks, strap, strings, tuner and capo, guitars are also practically “meant” to be displayed for your enjoyment even when you are not rocking it, the STRING SWING GUITAR HANGERS will turn your guitar into a piece of “Wall Art” while keeping it safe and sound
• ✔YOKE PIVOTS TO ACCOMMODATE VARIOUS HEADSTOCKS – Great for guitars which have a headstock with single or uneven heels; Personalized protective padding gently and securely supports the instruments; Deep cradle design prevents the guitar from being improperly placed in the hanger, recommended for classicals
• ✔TRUSTED BY OVER 10 MILLION GUITARS SINCE 1983 – No matter what kind of guitar that you have, you can count on us to keep it safely stored, we have been crafting the best musical-instrument hangers and display systems that you can buy for over 30 years; Our products are manufactured in Wisconsin, where we started, and are guaranteed for life
• ✔LIFETIME STRUCTURAL WARRANTY - The STRING SWING GUITAR HANGERS are CERTIFIED 100% MADE IN USA with REAL AMERICAN HARDWOOD and backed by a LIFETIME STRUCTURAL WARRANTY –and Add yours to cart Now and keep your guitar safely stored while supplies last!

User questions & answers

Question:

Will this work with a Deering Goodtime banjo

Answer:

The cradle is intended to be flexible -- it won't come out unless you turn it upside down. The thumbscrew will hold the neck securely in place. Here are the instructions that should have come with the unit: 1) Insert neck unit into base unit, and tighten the thumbscrew on the base, until the neck unit is snug. 2) Open the legs on the base unit all the way. 3) Insert the cradle from the front, prongs "higher." Turn the cradle 180 deg, so the prongs are lower. 4) Check that it's stable and level, before you use it for your instrument. I love this stand -- I just ordered my third one.

Product description

The Gator Cases 4G series gig-bag for electric guitars combines quality with affordability and protection! The GB-4G-ELECTRIC features a durable nylon exterior with Gators GFLEX 20mm padding to prevent scratches and dings while transporting and storing your electric guitar. The 4G series gig-bags feature a patent pending Pick-Clip zipper pull that holds a spare guitar pick, padded backpack straps with the contoured back padding for added comfort while carrying, as well as a durable reinforced carry handle. The Gator Cases 4G series gig-bags also feature a generously large front pocket for storing guitar accessories such as guitar tuners, strings, cables, capos and other items. The GFLEX padded interior has a reinforced headstock and bridge area to prevent wear from the guitar as well as internal pads to protect the bottom of the guitar.

The GB-4G-ELECTRIC electric guitar gig-bag dimensions are: Body Length: 19.5” Body Height: 3.25” Lower Bout Width: 14” Middle Bout Width: 13” Upper Bout Width: 11” Overall Length: 40.5” The exterior pocket dimensions are 14” X 12.5” X 2”. The 4G series of guitar gig-bag is also available for electric guitar, acoustic guitar, bass, two bass guitars, two electric guitars, classical guitar, soprano ukulele, concert ukulele, and tenor ukulele.

Gator Cases is known for manufacturing innovative products designed to protect! We offer products with a wide range of available sizes, materials, and protection levels, for all types of instruments and gear including Frameworks stands, Rackworks install racks and accessories, and Protechtor drum cases. It isn't hard to find a great reason why Gator should be the brand you trust to protect your equipment for life!

• Fits Most Standard Size Electric Guitars including Fender Strat/Telecaster with 20mm Interior Padding
• Spare Guitar Pick Storage on the Patent Pending Pick-Clip Zipper Pull
• Padded Backpack Style Straps & Reinforced Carry Handle Contour Back Padding for Comfort
• Large Exterior Pocket with Mesh Storage and Internal Headstock and Bridge Reinforcement to Prevent Wear
• Interior dimensions: Body Length: 19.5” Body Height: 3.25” Lower Bout Width: 14” Middle Bout Width: 13” Upper Bout Width: 11” Overall Length: 40.5”

User questions & answers

Question:	does the bass bag have a plastic or metal zipper on the main compartment that holds the guitar itself
Answer:	Folded up the length is 21". The neck is not adjustable. It is a very well designed stand. Sturdy. I've had it for years.
Question:	I have a fender jazz bass, feet in this bag
Answer:	Yes. I have Martins, Taylors, Gibsons, and Nitro Fenders all on these stands including outdoor shows. But I would never leave any guitar on a stand longer than I was using it. Best place for a guitar is in the case. Not on display.
Question:	How many inches tall is this case
Answer:	Yep, it's a pretty decent dense foam padding on all parts that contact the guitar (yolk and neck). Honestly, I don't think there is any metal guitar stand out there that would just have bare metal for the guitar contact points - they wouldn't sell many. :)
Question:	What are the internal dimensions
Answer:	The neck brace does have an adjustable knob that screws on. The lower arms which support bottom of instrument is held by a bolt of some kind but it swivels on either side but it does not come off. Hope this helps you.

Product features

Backpack Style Bag

Features padded backpack straps and contour back padding for extra comfort and support.

Guitar Pick Storage

Spare guitar pick storage on the patent pending pick-clip zipper pull.

Thick Padded Interior

20mm padded interior protects the instrument and includes reinforced headstock and bridge area to prevent wear.

Exterior Pocket

Large exterior pocket with mesh storage for storing accessories like tuners, strings, capos and more.

Gator Cases 4G Series Gig Bag For Electric Guitars With Adjustable Backpack Straps; Fits Most Stratocaster and Telecaster Style Guitars

The Gator 4G Series gig bag offers fantastic protection for your electric guitar. The 4G series gig-bags feature a patent pending Pick-Clip zipper pull that holds a spare guitar pick, padded backpack straps with the contoured back padding for added comfort while carrying, as well as a durable reinforced carry handle. All while a durable nylon exterior with 20mm padding prevents scratches and dings while transporting and storing your electric guitar. The Gator Cases 4G series gig-bags also feature a generously large front pocket for storing guitar accessories such as guitar tuners, strings, cables, capos and other items. The padded interior has a reinforced headstock and bridge area to prevent wear from the guitar as well as internal pads to protect the bottom of the guitar

• 【HOME & STUDIO WALL STAND】The personalized solid ash guitar rack and plectrum pick holder, is designed to display a guitarists treasured electric or acoustic guitar on the wall safely in style. Display your favorite guitar in pride of place on the wall in your bedroom, living room or office
• 【SOLID ASH GUITAR HOLDER】 The wood base and shelf is comprised of solid hardwood, which sets this rack shelf apart from the rest of the hangers on current market. The hanger part comes with a padded with a soft layer of foam that will help to prevent any damage to your instrument and is soft enough to not leaving any markings on your instrument if your guitar does happen to slip a bit
• 【SIMPLE & MULTIFUNCTIONAL】This wall mounted guitar hanger serves as an easy way to store your guitar if you need to put it down in a rush, but also makes as a great way to keep your instrument away from the clumsiness of you, your pets, and your children. It comes with a shelf and 3 hooks that make it also can be used as an entryway shelf
• 【EASY TO ASSEMBLE】All hardware neccessary are included. Each shelf can hold up to 20lbs. Overall dimensions: 13.8”W x 3.8”D x 5.9”H. This guitar stand is suitable for multiple guitars: Acoustic guitar, Electric guitar, Classical guitar, Bass guitar, Ukulele. BUT PLEASE BE NOTE: If your guitar headstock has single or uneven heels – PLEASE MEASURE THE NECK FIRST!
• 【PERSONALISED GIFT】A great gift for the guitarist in your family; such as the guitar hero Mum or Dad or musical teen rock star! Perfect gift for Valentine's Day, Father's Day and Birthdays

User questions & answers

Question:	Is the back of it flat to where it can stick to mounting tabs if we dont want to drill into our wall
Answer:	yes
Question:	No mounting instructions came in the box. Can someone get them to me
Answer:	The legs have foam rubber wrapped around them, the entire length of the front feet. The neck is adjustable up and down. I successfully used this stand with a "contoured" back Ovation guitar without problem. I currently play an Emerald Guitar carbon fiber guitar, and the shape is a little different than standard guitars. I DO use the rubber head lock every time I put it on the stand, because the odd back shape does cause it to tend to twist a little. I do think it would hold a Warrior fine. The stand is very stable, and locks tightly and secure. Good luck! It's a great stand for the money.

Product features

WOODEN WALL HANGER FOR YOUR GUITAR

Product description

Gator Cases Molded Plastic 1x12 Combo Amp Transporter and Stand

• Fits most popular size amps
• Indestructible roto mold design
• Amp sits securely on top of case during use
• Open top design provides access to handle for easy transport
• Two wrap around straps with clips to secure lid to base during transport

User questions & answers

Question:	Will this fit a fender 65 trri
Answer:	I just measured 42" inside length and 45" outside length.
Question:	Will a Vox AC30 it in this case
Answer:	This is a really nice soft case. Internal dimensions: Length 12 1/4 inches, base of body 8 inches, top of neck 4 1/2 inches, depth 2 1/2 inches. There is significant all around padding. Easily fits a concert ukulele size.
Question:	Can this case fit into the 62 inch linear (w+d+h) aircraft check size
Answer:	Possibly, but not as well as the CC01B-BW Banjo hanger. B01454Q3Y8 https://www.amazon.com/Hanger-Hardwood-String-Swing-CC01B-BW/dp/B01454Q3Y8/ Feel free to give us a call with any questions 1-888-455-6628
Question:	will this fit my amp 27x13x
Answer:	Of course,it can be use for acoustic guitar,electric guitar,bass,ukulele,etc.

Product description

Model Number : ZH1028400--Footstool Strap Neck Stand Rest

Type : Footstool Strap Neck Stand Rest

Flanger FA-80 Practical Utility Guitar Accessory Footstool Strap Neck Stand Rest For Classical Guitar Folk Guitar

Features: Multifunctional can as a footstool, neck stand for long time using.

It is small and so easy to take. When it is used as strap, you can insert it to your belt and adjust its cup to suck the guitar.

With a powerful suction cup, you can use it in performances or practice.

When playing guitar it can increases the comfort of the playing posture Specifications:

Condition:new Main Color:multi color Item



Size:120x65x10mm Material:PU+ acrylic material



Package included:

1X Utility Guitar Accessory with 5 pick (random color and thinness)

• Multifunctional can as a footstool, neck stand for long time using.
• It is small and so easy to take.
• When it is used as strap, you can insert it to your belt and adjust its cup to suck the guitar.
• With a powerful suction cup, you can use it in performances or practice.
• With a powerful suction cup, you can use it in performances or practice.