13 best guitars pickups

Product description

Fender Tex-Mex Strat single-coil pickups offer increased output, sparkling highs and attention-grabbing warm tone that keeps all the characteristics of your favorite vintage-style Stratocaster. From Texas grit to soaring clean tone, they’re the pickups of choice for versatile players.

User questions & answers

Question:	Why are they called 57/62 pickups if they are reverse engineered from a 63 strat
Answer:	Like most multi-effects processors this unit features audio out via 1/8" headphone jack. Unit also has two 1/4" phone jack outs for stereo. Left side only is mono.
Question:	What is the color of the pickup covers? Aged white, parchment or white
Answer:	Yes, You can.
Question:	Are these pickups (all three) signed by Abigail Ybarra? and if so, does it have the same date signed on it
Answer:	Yes you can
Question:	I want to get these in black, is that possible
Answer:	yes

Product features

Fender Tex-Mex Strat Pickups

Fender Tex-Mex Strat single-coil pickups offer increased output, sparkling highs and attention-grabbing warm tone that keeps all the characteristics of your favorite vintage-style Stratocaster. From Texas grit to soaring clean tone, they're the pickups of choice for versatile players.

Features

• Polysol-coated magnet wire
• Staggered pole pieces for balanced output
• Reverse-wound/reverse-polarity middle pickup to eliminate hum
• Alnico 5 magnets for more focus and dynamics
• Overwound bridge pickup for maximum output
• Vinyl-coated output wire and plastic bobbin
• Installation hardware included

Product description

Seymour created this classic humbucker combination while in England in 1974, and it remains his favorite set of pickups to this day an SH-4 JB for the bridge and SH-2n Jazz Model for the neck. Together they provide one of the most versatile humbucker ever built. The JB Model humbucker is our most popular pickup of all time. It adds juice and versatility to the bridge position of any humbucker equipped guitar. With its hot coils, and alnico 5 bar magnet, this pickup delivers an unmistakable upper midrange attack, a tight, articulate low end, and harmonically rich highs that can really sing. The JB is the perfect bridge pickup for anything from blues & country to the meanest hard rock & metal. The Jazz Model neck humbucker uses an alnico 5 bar magnet and a special coil wind for an articulate, glassy treble response that balances very well with its full, but tight low end. The scooped midrange gives this pickup a smooth tonal character all its own. Originally designed as the matching neck pickup for the JB Model bridge pickup, the Jazz is an incredibly versatile humbucker that will work for almost any style of music. The Jazz Model is an excellent neck position counterpart for almost any of our moderate to high-output bridge humbuckers. The Jazz Model has been used by many great players over the decades, from Randy Rhoads to Jeff Beck to Seymour W Duncan. Hand built in our Santa Barbara, CA, factory, these humbuckers use an alnico 5 bar magnet, nickel silver bottom plate, 4-conductor lead wire for multiple wiring options, and are vacuum wax potted for squeal-free performance.

• The ultimate Hot Rodded humbucker set
• Matched set of JB and Jazz Neck models
• Combination versatile enough for classic rock to extreme metal
• 4-conductor cable and wax potted
• Alnico V magnets

User questions & answers

Question:	Will these fit an sg? specifically i have a chinese sg copy, with "hum buckers" in it. i am trying to upgrade it
Answer:	No sir. Mrs. Ybarra retired in 2013. http://www.guitarworld.com/pickup-winderbuilder-abigail-ybarra-who-came-fender-1956-retires
Question:	Are these good for high gain amps? I want something right inbetween vintage and super high muddy output like an invader
Answer:	Yes, we can throw in a set of black covers. Just send us (Music UFO) a message via Amazon system after you buy, and we will include the additional covers in the package. Thanks.
Question:	What would be a good single coil to use with these in a HSH setup
Answer:	I don't remember if they are marked, but I just looked at my guitar. The pickup with the taller of the two mounting bracket is for the bridge. The other, with the slightly shorter surrounding mounting bracket is for the neck.
Question:	Do they come in zebra or crime
Answer:	Yes they would work fine, they are a great sounding pickup set, they're matched pretty well. The neck pickup isn't as powerful as the bridge but it's solid!!!

Product description

Description

The item is a professional and practical sealed humbucker pickups set, which is ideally designed for the bridge and neck positions, and compatible with Gibson Epiphone Les Paul guitars. These excellent quality pickups are designed to duplicate that classic warm sound yet they have slightly more output to give you a bit more crunch for the punch. Great replacement for your broken, dirty or old humbucker pickup!

Features

- Color: mainly black.

- Material: durable copper and hard plastic.

- 100% brand new and high quality Sealed Humbucker Pickups Set.

- Great humbucker pickups set, Gibson Epiphone Les Paul guitars.

- Designed to duplicate that classic warm sound yet they have slightly more output to give you a bit more crunch for the punch.

- Neck pickup is rated at 8.5-9K Bridge pickup is rated at 8.5-9K.

- Triple wax dipped and vacuum sealed to eliminate any unwanted feedback and noise.

- Each pickup includes 4pcs height adjusting screws.

- Great replacement for your broken, dirty or old humbucker pickup!

--------------------------------------------------------

Package Including

1 * Professional Sealed Humbucker Pickups Set for Gibson Epiphone Les Paul Guitars (Black)

8 * Screws

• Color: mainly black. Material: durable copper and hard plastic.
• Great humbucker pickups set, Gibson Epiphone Les Paul guitars.
• Designed to duplicate that classic warm sound yet they have slightly more output to give you a bit more crunch for the punch.
• Triple wax dipped and vacuum sealed to eliminate any unwanted feedback and noise.
• Each pickup includes 4pcs height adjusting screws.

User questions & answers

Question:	Are they marked to designate bridge from bridge and neck
Answer:	This multi effects guitar pedal is excellent. The chorus is great. I find it to be rather subtle which I prefer. It comes out a bit more when the distortion is engaged.The delay is great. Fairly easy to use and sounds good.Vey nice!
Question:	Would these pickups work for a b.c. rich mockingbird nj classic? my neck pickup went out and this is a cheaper alternative to sending it in
Answer:	Of course!Just use a internal cable to connect your phone.It is particularly convenient.I bought this multi effect pedal for my father as a gift.
Question:	Do they need batteries
Answer:	Only need to long push foot switch A and B at the same time.I always use this multi effect pedal for my band performance. Easy to use
Question:	will this pickup improve my epiphone special II
Answer:	You can short press foot switch A and B at the same time.It will turn to live mode.You can edit the tone you want.Hope my answer can help you

Product description

The Seymour Duncan JB Model is the world’s most popular humbucker. This Trembucker version provides the same slammin’ output while retaining singing highs, aggressive harmonics, and just the right blend of sustain and distortion. Goes from sweet warm tones to raw rock ‘n’ roll. Compared to the SH-14 Custom 5, the JB has a stronger treble detail. Some players use it with 250K pots to smooth out the highs. Comes with four-conductor hookup cable. Application The archetype hot-rodded humbucker for over 30 years. Great for everything from heavy blues to heavy metal. Complete Setup Recommended for bridge position. Often a JB is paired with a neck pickup like the SH-2n Jazz (Seymour’s favorite) for versatility or a SH-1 ‘59 for P.A.F. tones. Guitars For balanced and warm instruments. Works especially well with rosewood fingerboards. Players Paul Stanley - KISS Gary Rossington - Lynyrd Skynyrd Ty Tabor - King’s X Steve Marker - Garbage Nick Hexum & Tim Mahoney - 311 John Connolly - Sevendust Dave Mustaine - Megadeth

• Recommended for bridge position
• Great for everything from heavy blues to heavy metal
• World’s most popular humbucker
• For balanced and warm instruments; Works especially well with rosewood fingerboards
• Comes with four-conductor hookup cable

User questions & answers

Question:	Hi, do they fit into a jaguar classic player hh
Answer:	Not familiar with the Jaguar. Used mine in a Strat and worked great. Great sounding and if you are replaceing a double they would work.
Question:	I realize this considered a bridge pickup; but I’m thinking about putting it in my neck position. Has anyone tried that
Answer:	Yes, I have one in the neck of my Sheridan. I also have one on the bridge of my Carvin SH575. It is such a powerful pickup, in the future I will probably use JBs in both so that the levels are easier to match, but it makes an outstanding neck pickup. I don't find it too treble-ish, just thick and full.
Question:	Hello, Will this fit in a Ibanez S470dx
Answer:	Hi,TB-4's are spaced to fit guitars that are equipped with a Floyd Rose bridge. I'm not sure if the Ibanez has the same string spacing as a Floyd. I would assume they would be but that's just a guess.
Question:	Will this fit in a PRS 245 se
Answer:	I don't see why it wouldn't, it's the same size as any other humbucker.

• Turn your acoustic guitar into an acoustic-electric without expensive modifications
• Easy to install: can be clip-on to guitar sound hole and connect the audio input with a standard 1/4" connector
• It will turn your acoustic music more powerful and electric
• Pickup Size: 5.3 x 1.1 x 0.4" ; Cable Length: 10'
• Package Contents: 1 x Guitar Pickup, 1 x Cord

User questions & answers

Question:	Does it work with rocksmith
Answer:	C7 bulbs, candelabra/E12 base 5-7 watts.
Question:	Hi can this fit into my Tylor Baby Guitar 3.5" soundhole
Answer:	The base of the LED bulbs are shorter than regular night light bulbs and/or candle light bulbs so it will not make contact with the metal tab in the candles.
Question:	where are the tone and volume controls
Answer:	Yes they are it is a machine brace bottom not a plating of brass the added suction cup makes them even more secure. They work very well with the darken of the evening.
Question:	Does it work with nylon strings
Answer:	Hi - According to the box it is 5 feet. We did not need to unravel the cords so I have not seen them extended for myself, but it sounds about right. By the way, I love them in my windows and they all work great. Hope this helps, happy holidays!

Product features

Easy to use

Easy to install: can be clip-on to guitar sound hole and connect the audio input with a standard 1/4" connector



 

Specifications

• Cable Length: Approx. 10 feet (3meters)
• Plug: 1/4 inch (6.3mm)
• Size: 5.3 x 1.1 x 0.4" (13.5*2.8*1cm)
• Packaged in a paper box

• Reducing Noise – DSS-6 is a passive guitar pickup (no battery is needed). It uses the magnetic field to collect the string vibration and pass it to the speaker, which is not affected by the external environment so that effectively reduces noise.
• Solid Mahogany Housing - Solid Mahogany Housing can transmit acoustic vibrations stably, providing a balanced and clear tone. Also, the vintage Mahogany appearance with natural pattern matches every acoustic guitar.
• Volume & Tone Control - Provide volume control and tone control. It's easy to adjust the sound to get the best string balance.
• Sweet and Clear Sound - DSS-6 adopts double coil technology to reduce noise and feedback, ensuring the sound is sweet and clear. (Please work with AMP to receive sound)
• Easy Installation – Install in the soundhole and don’t need to drill. Soundhole diameter range: 3.8”/96.6mm~3.94”/102mm. Note: Suitable for 6-string acoustic guitar but does not work with 3/4 size acoustic guitars like Taylor baby series, little martin series.

User questions & answers

Question:	Is the pickup loud enough to use in a party
Answer:	The volume depends on the amp you use.
Question:	Where do I find the male/male cable needed to run from the pickup to the amp, this has a female output
Answer:	Dear TDW,This has a female output.if there are any problems please feel free to contact customer service first through the order page and we will provide you with professional debugging guidance.
Question:	does this pickup work with nylon string guitars? If not, any suggestions? Thanks
Answer:	Dear customer,No, it doesn't. We kindly suggest you could please feel free to contact customer service first through the order page and we will provide you with professional debugging guidance.
Question:	Will this work with coated metal strings
Answer:	Yes, it works on my coated phosphor bronze strings.

Product features

Humbucking model

Donner passive acoustic guitar pickup features stacked coils so that It can effectively reduce noise and provide excellent string-to-string balance and acoustic clarity.

Volume & tone control

It's easy to adjust the sound to get the best string balance and achieve the effect you want.

Soundhole clip cushion

Ensuring that the pickup and audio cable are installed firmly and do not damage the guitar.

Specification：

Pickup Theory: Cutting Magnetic Lines

Pickup Type: Humbucking Passive

Housing: SOLID Mahogany Housing

Connection Method: 64cm instrument cable with 3.5mm and 6.35mm jacks

Fit Minimum Soundhole Diameter: 3.8” (96.6 mm)

Easy Installation

No drilling hole, fast installation, just plug and play.

1. Take out the pickup and toward the 3.5mm jack side to the guitar bridge.

2. Slip the pickup into the soundhole from the high E string side. (Lose the string if it's too tight)

3. Clip both sides of the pickup to the edge of the pan

4. Push the pickup to the end of the fingerboard as closely as possible.

Product description

The Pure Mini is a transducer-only system. No battery, no onboard electronics, just the pure pickups. Don't be fooled by the sound of some competitors' "thin sounding" passive systems. The Pure Systems are definitely different. They sound full and rich and have sufficient output to drive most amps and PA systems directly, without a preamp! Advantages of the Pure Guitar System The special Pure surface transducers transmit a significant portion of the soundboard because they are not as close to the strings as an under-saddle pickup. Each of the 3 transducers is designed to pick up a specific string pair, but also "listens" to the adjacent area around the bridge. The Pure pickups are not under pressure and therefore do NOT sound percussive or harsh. The Pure System reproduces all strings nicely balanced, a known problem with under-saddle pickups. The Pure System sounds great just in passive mode! Unlike under-saddle pickups which passively can sound thin and trebley, the passive PURE system puts out a nicely balanced, warm, full range signal. Feedback Resistance How safe is the Pure System with feedback? Due to the Pure System's location on the bridge plate under the bridge, feedback resistance is comparable to under-saddle transducers. Technically, a pickup installed in or on the bridge is a lot less likely to feedback than one which is attached to the open sound board. The 1/8" thin sound board can act like a diaphragm and vibrate along with loud sound-signals from speaker cabinets. This is the kind of feedback you experience on an acoustic guitar. The thicker bridge area is a lot harder to be set into vibration from an outside source simply because of its mass. In our tests with both, steel string and classic guitars equipped with an under-saddle pickup plus the Pure System, we were able to achieve about the same gain-before-feedback with both systems.

• Three Transducer Pickup System for Steel String Guitars
• Includes 1/4" Endpin Jack
• Pre-wired, No Soldering Required
• High Output - No Battery Required!

User questions & answers

Question:	Would this work on a three string mountain dulcimer
Answer:	If you are building a fulcimer, I think so, otherwise I don't know how you would install it. They are mounted under the bridge plate ( superglued). UNLESS you are building the instrument, I don't know how you would install it. You also have to drill the jack mount to the end of the dulcimer. I own a 4 string dulcimer and there is no way to install.
Question:	I removed a k&k, one of the super glued heads was ruined. can i get good response with 2 heads only? maybe on a small guitar of uke
Answer:	You still should get sound. I am not sure how good it will be. I have not had any experience with this.
Question:	Is this a good option for a big guitar such as a Martin HD28V? I am under the impression that this is for smaller guitars
Answer:	No, it will work fine in your HD28V - I put one in an HD28 and it sounded great. The mini captures the true essence of your guitar and every one I've installed (mostly in my own guitars), has sounded full and balanced.
Question:	How do you install this
Answer:	It is installed by applying superglue to the pick ups and gluein them to the bridge plate inside the guitar. It comes with a set up jig and some putty to make sure everything is aligned properly. An average do it yourselfer should be able to accomplish this project, but a luthier would probably do it for around $50. They do sound great by the way in my custom 28.

Product description

Woody HC Hum-Canceling Soundhole Pickup Walnut. One of three choices in Seymour Duncan's Woody Series, The Woody HC Hum-Canceling Soundhole Pickup features instant mounting and unmounting, along with a great-looking maple cover that will look unobtrusively fantastic on your guitar. More importantly, if you already love the sound of your acoustic, this pickup will passively amplify your sound without anything to detract from it. Especially great for singer-songwriters and folk strummers, the Woody Series pickups offer a moderate response that gives you plenty of amplification while allowing your guitar to blend nicely with vocals and other instruments. The Woody HC will fit nearly any acoustic guitar's soundhole, with a radius range from 3.85" to 4.10". It's priced to fit the budgets of most musicians, and is a much more affordable alternative to buying a mic for acoustic amplification. (Chose your color from the drop down menu)

• Quick-mount
• passive
• magnetic soundhole pickupHum cancelingModerate outputInstant mountHoused in maple cover and double pottedWarm and rich tone with no 60-cycle humGreat for strumming and delicate fingerstyle playingIncludes studio-quality 14' cableWorks with any guitar amplifier (acoustic guitar amp preferred)
• or plugged directly into PA systems or mixing consoles

User questions & answers

Question:	can I use this and conect it to the preamp my dean exotic has
Answer:	Yes.
Question:	will this work with a acoustic guitar mounted pre amp
Answer:	Not without extensive modification. The pickup has a 10+ foot core with a 1/4 inch plug on the end. (Intended to plug into a pedal board or amp.). To run it into an onboard preamp, you'd have to cut the cord, run it through the sound hole, and solder it to the preamp... Probably not worth it.
Question:	Will this work plugged into my B100 Acoustic bass amp
Answer:	yes you can use is for a acoustic bass amp but i dont know if you can fit that pick-up in a acoustic bass i hade to cut a little peace out of my guaitar to git it in the sond hole
Question:	Whats different between this and the seymour duncan woody series sc sa-3sc
Answer:	The SC series are single coil pickups, while the HC are hum-cancelling (humbucker). Single coil pickups tend to have a more open, brighter sound but can be more susceptible to hum and noise depending on your stage situation. Humbucker pickups cancel the hum and noise, but also some highs so the sound is thicker and warmer.

• Good Sound- The Acoustic Guitar Pickup comes with double sided tape and self adhesive Velcro,it is able to eliminate interfering external sounds and not be influenced by sound reflections from nearby objects, bring you the clear sound quality.
• Stick Patch Design - With the stick patch transducer works by contacting with the sound source directly. it is very easy to install and you can stick it onto the instrument to minimize the damage to instrument body.
• Nice Audio Jack - Randon Piezo Contact Pickup, 9.65” cable length, Jack female socket, suitable for universal cable with 6.35cm jack male plug.The audio jack can replace the end pin and install the strap.
• Wide Application - The guitar pickup fits for many kinds of acoustic instruments, such as Guitar, Ukulele, Violin, Mandolin, Banjo, Kalimba, Harp etc.
• Promise - 365 days expiration, 7 days unconditional return promise. If you have any questions or demanding advice on musical instruments, please feel free to contact us.

User questions & answers

Question:	I know if the pickup adjust the volume
Answer:	It can't adjust the volume, this pickup connection is stabl，the sound transmission without any impurities. You can adjust the volume via the speaker.
Question:	How thick is the disk
Answer:	About 1/8 inch.
Question:	My Kalimba sounds great, but its volume a little small on the show. Can this pickup increase the volume
Answer:	Yes, it works great. You can put it in the kalimba bag, so convenient to carry.
Question:	can this stand support the heterosexual guitars
Answer:	lol what

Product description

Features:



Neck Pickup. String span is 48 mm, with the pole pieces 10 mm apart. Resistance is 5.52-5.54 k-ohm. Inductance is 3.1 - 3.17H compared to our standard wound coils which produce 1.98 Henry yet have the same resistance. South pole is facing up.



Middle Pickup. String span is 50mm with the pole pieces 10mm apart. Resistance is 5.1-5.52 k-ohm. Inductance is 3 - 3.2 Henry. Reverse wound and opposed magnetic polarity, North pole faces up.



Bridge Pickup. String span is 52mm with the pole pieces 10.4mm apart. Resistance is 5.97-6.1 k-ohm. Inductance is 3.72 - 3.77H as opposed to our standard wind of 2.61 Henry. South pole faces up.



To give you some idea and comparison of their power a US-Strat ( 72 ) has an inductance of 2.2 Henry on the bridge and a noiseless Strat of around 2.5 Henry so expect these pickups to have a fuller sound with increased mid and lows whilst retaining the clarity and bright tone of the trebles as you would expect from single coils.



Metallor pickups use ceramic magnets as these are even brighter than Alnico V or III, and in higher output pickups help to counterbalance the treble lost by the higher resistance (remember higher resistance means more midrange, but less highs).

• These are a single coil design machine winding and calibrated with the magnetic field to produce double the output inductance of regular single coils with each set of pickups having its own unique flavour. This special winding also has the added advantage of keeping the Ohms roughly the same as a vintage wound single coil.
• Each pickup is designed for a specific location to match up with the increasing width between strings and produces the ideal power for that tonal position.
• The mid position pickup is reverse wound and opposed magentic polarity to ensure true hum cancelling properties in switch positions 2 and 4. All pickups are wax potted to reduce unwanted noise
• Flat pole pieces and no trapezoid bases mean these pickups are suitable for left and right handed guitars.
• Supplied with screws and springs for fixing. All coils are wax potted

User questions & answers

Question:	Are the covers removable so different ones can be mounted
Answer:	Hi, no these do not need batteries. They are 2 wire pickups,very nice looking. I haven't put them in anything as of yet; just couldn't go wrong for the price.
Question:	What’s potitions pickups? Neck is white
Answer:	Don't know about your Epiphone Special II Les Paul. But, They helped my Epiphone Goth SG! My factory pickups sounded like a hissing cat! Couldn't tame them down. No matter what I did! So, I put these in and they greatly improved my tone!!!! Hope this helps you! \M/

Product description

Brand New,never used. high quality and testing is fine Item 100% like the picture shown Tested is fine.Complete With Neck & Bridge Surrounds These are excellent value LP alternative humbuckers Will fit most guitar as a direct replacement They feature solid nickel pole pieces. Fully wax potted and sealed. Pair open zebra faced humbucker pickups DC Resistance: NECK:9-10K BRIDGE:9.5-10.5K Pickup Pole Spacing: 50 mm / 52mm Package content： 1 x Pair Double Coil humbucker pickups

• Tested is fine.Complete With Neck & Bridge Surrounds
• These are excellent value LP alternative humbuckers
• Fully wax potted and sealed.
• DC Resistance: NECK:9.5-10K BRIDGE:9.5-10.5K
• Pickup Pole Spacing: 50 mm / 52mm

User questions & answers

Question:	Does it come with two
Answer:	yes, they will fit any standard humbucker equipped guitar. I have a set of Seymour Duncan humbuckers in my Epiphone Les Paul.
Question:	Are these pickups noisey or they pretty quiet
Answer:	Invaders are super hot you almost have no cleans with invaders. These are sh4 JB for the bridge and SH2n Jazz for the neck.... these are a good match but if you want something slightly hotter use an SH1n 59 in the neck and the SH4 JB in the bridge both of these are good matches with very good distortion if needed without the ugly muddy tone..... think Van Halen Ozzy Ozbourn, or most 80s hair bands..... if you need something heavier there are the invaders and Duncan Distortions but if you need versatility with clean as well as distorted.... use the JB in the Bridge and either the SH2n Jazz or the SH1 59 int the neck........ MY Preference is JB 59 set but JB Jazz is a great combo as well have fun guys!!!
Question:	Is there any way this could work on a Strat??? I need a HB
Answer:	Little 59 YJM fury Or the staggered ones ssl5 As these pickups are high output, these way the middle pickup would still be heard and has its own separate thing
Question:	Are these ceramic or alnico pickups
Answer:	They only come in crime if you steal them!

Product description

One of the highest output pickups Seymur Duncan makes. SHR-1 Hot Rails are one of the highest output pickups Seymur Duncan makes. It's a humbucker that fits into a normal single coil slot, so you get the noise canceling effect without cutting a large hole in your guitar. The two thin blades with powerful coil windings give you the incredible sustain and a fat, full sound that's needed for playing heavier rock music. This pickup responds to the subtlest finger movements. Available in black or white Four conductor cable

• The two thin blades with powerful coil windings give you the incredible sustain and a fat
• full sound that?s needed for playing heavier rock music^This pickup responds to the subtlest finger movements^Available in black or white Four conductor cable^Bridge Position

User questions & answers

Question:	The title says black but the picture is white. Is it really black
Answer:	This is the BLACK hot rails pickup
Question:	Would this be considered a humbucker or a single coil
Answer:	It's a hum bucker and also the whole point of it - to be able to fit a humbucker in a single coil slot. Also, that pickup sounds great!
Question:	I'm going to heavily modify a squier Bronco bass. can it handle low tunings
Answer:	This is what most people use to upgrade a bronco. Has a great sound!
Question:	How many come in box
Answer:	One per Box. BTW - Pickup sounds great.

Product description

The Seth Lover Set is the perfect choice for players wanting to transform a solid body or semi hollow into a singing classic rock machine. Nothing but blue sky. The Seth Lover neck model gives you a smooth but articulate tone by striking the perfect balance of warm, full low end and a nice sweet treble. The alnico 2 bar magnet helps to smooth the high end response, while the vintage output coils bring out this pickup's rich harmonic content. Single notes will have that perfect singing quality, and the un-potted nickel silver cover gives the tone an almost piano-like percussive feel. The Seth Lover bridge model gives you that warm, airy, open tone by striking just the right balance of low end warmth with a smooth but articulate top end. Chords will have a full, open sound, and single notes will have a soft, yet articulate feel.

• A calibrated set of the most faithful PAF's available, built exactly the way Seth Lover intended for a smooth and sweet tone.
• Period correct, faithful PAF humbucker
• Perfect for Jazz, Blues, and Classic Rock stylings

User questions & answers

Question:	Hello. ¿Is this a 4 conductor pickup? Thank you
Answer:	This set has vintage single conductor wiring. To get four-conductor wiring you would need to purchase the 4-conductor bridge and neck models separately, which we have available with either nickel or gold covers.
Question:	Who would appreciate this more, a jazz or rock guitarist
Answer:	Either. The jazz guitarist will easily like this, as long as we aren’t talking about 70s era Al DiMeola standing next to a non-master Marshall jazz. If you are talking about Fender blackface with sparkling reverb, then ‘yes’ these are killer pickups. The rock guitarist who wants dynamics and isn’t using a heavily saturated 100 watt stack (and standing next to it) will love it as well. I like them with some overdrive, but usually nothing more than what’s available on a Clone tweed Deluxe-type amp. Enjoy! You really can’t go wrong with these pickups.
Question:	Could I replace these myself or do i need to have a professional do it
Answer:	Some basic soldering skills are needed as well as ability to read a simple wiring diagram. If you can do both those things you should be able to do it.
Question:	Are these pickups good with coil split
Answer:	I wish I could answer your question. I only have one guitar with split coils. I have the original coils still on it. Sorry. Mike: