16 best bass tuner machine

Product description

The Mullard 12AU7/ECC82 reissue is a great 12AU7 tube. This tube has low noise and low microphonics. A great tube for Hi-Fi amps and microphones.

• Great sounding tube
• Low noise and mircophonics

User questions & answers

Question:	Avail in balanced pairs
Answer:	No all is good
Question:	whats the difference between 12au7 & 12ax7 tube for conrad johnson pv10bl pre amp
Answer:	I don't personally own that guitar, but I looked up the dimensions, and it says it is 48" long. The bag is only 41" long so my guess is probably not. I would make sure you know how long the guitar is before you buy the bag.

Product description

12AU7 / ECC82 Preamp Vacuum Tube

• 12AU7 / ECC82 Preamp Vacuum Tube

User questions & answers

Question:	I assume 12 AU 7 is two tubes in one obviously maintains stereo sepeartion Common cathode which is grounded normally anyway
Answer:	To be precise, the 12AU7 is two independent triodes in a single tube. Like any other electronic component, these can be used in all sorts of applications, limited only by the circuit designers imagination and ingenuity. They can by used in audio and RF circuits... These could be used in a stereo design, but they are not limited to that application. The cathodes are not common between each section, and depending on the circuit design may operate at some potential other than ground.
Question:	Can these tubes be used in a vintage Vibro Champ
Answer:	Read through a few articles about your vintage Vibro Champ, and it looks like the consensus is that this tube would work better for the V1 position. V2 would be a 12AX7, V3 6V6, and V4 5Y3GT. It is my understanding the 12AU7 has less gain. You could try a few different tubes in the pre gain to see what you think.
Question:	pin
Answer:	Yes, this tube has 9 pins.

Product description

The original Genalex Gold Lion ECC82/B749 is one of the most rare 12AU7 types ever made. This tube featured superb linearity, balanced sections, and extremely low noise. The reissue Genalex Gold Lion ECC82/B749 features gold plated pins and has been carefully engineered to recreate all of the attributes of the original. This tube is a premium replacement for all 12AU7, ECC82, 5814, and 6189 types.

• Matched Pair
• Matched for both gain and conductance
• Full Range
• Low Noise
• Smooth Tone

Product description

The original Genalex Gold Lion ECC82/B749 is one of the most rare 12AU7 types ever made. This tube featured superb linearity, balanced sections, and extremely low noise. The reissue Genalex Gold Lion ECC82/B749 features gold plated pins and has been carefully engineered to recreate all of the attributes of the original. This tube is a premium replacement for all 12AU7, ECC82, 5814, and 6189 types.

• Low gain preamp tube
• Extremely reliable and consistent
• Best current production 12AU7
• Low noise and balanced triodes

User questions & answers

Question:	Would the Gold Lion 12au7 be a better choice over the Psvane version of the 12au7 tube
Answer:	Hi - In looking at your dimensions, your pedaltrain will not fit in this case. The length of the case, as you see is 4" longer. The biggest issue would be the depth. If your depth is 14" and the case depth is 14", you will have no clearance to remove the pedaltrain in and out of the case. Typically, the board will sit on top of the tray. Christine
Question:	If purchasing two, will they be a matched pair
Answer:	I used brackets and screws to mount a FX8 to the bottom. There is a layer of foam with a carpet top, so it threw me off on the depth and the screw tips poked out the other side :( so be careful. That only happened on the screws I was pushing hard on, if you use normal pressure and screws that aren’t longer than 3/8 inch.
Question:	Which one would be better for vocals and mid range the gold lion tube or electro-harmonix 12au7 eh vacuum tube
Answer:	Hi - This case does not come with dolly wheels or rubber feet. With that said, we certainly can add these upgrades to this case and would need to be ordered directly with our sales team. They can be reached at 631-557-0000. They will be more than happy to assist you any way they can. Christine
Question:	Is this item single or pair
Answer:	The neck width is 6.5 inches. The neck circumference is 18 inches. The "neck only" height is about 20 inches (and the length of the entire case is 43.5 inches)

Product description

Enjoy the pure, non-fatiguing sound of Class A amplification with the Bravo V2 headphone amplifier.

• Includes high-quality Shuguang 12AU7 tube
• Parallel 3.5mm and RCA stereo inputs
• Gain control with Japanese ALPS potentiometer

User questions & answers

Question:	Does this boost sound enough to use as the only amp to listen to records with headphones
Answer:	Short answer: no. Long answer: this amplifier expects about 1 Volt input for a full power output. A phonograph player only generates output in the .005 Volt sort of range. Also, the signal from a phonograph has to go through an RIAA filter to recover the low-frequency information. A record would not be able to wiggle a needle correctly to generate bass, and so RIAA equalization is applied during record pressing.
Question:	I mostly listen to music in digital format (MP3) and trying to decide between this amp and a USB headphone DAC...thoughts
Answer:	You're comparing Apples and Oranges. The Bravo is strictly a headphone amp. I use my Bravo with a Behringer UCA222. I chose the Behringer because it's a DAC (digital to analog converter) and an ADC (analog to digital converter). I use the Behringer to "rip" vinyl to FLAC files. Why bother with sonically compromised MP3 files when storage space is so cheap?
Question:	I don't know much about tube circuits. Do both headphone channels go through the tube at once and remain seperate channels? Or are they combined
Answer:	The answers about being two separate channels in the tube are correct. But there is an issue in the amp that needs a simple modification. Because of the way it was designed, there is an issue with balance and separation of channels. If you balance to one side or the other, there is still sound out of both left and right speakers or headphones. See the first post on this forum, just scroll down to the picture entitled 'Crosstalk improvement', which is the 6th picture, for details: http://rockgrotto.proboards.com/thread/5297/bravo-12au7-mods-appreciation-thread And be sure to get some different old stock tubes on "The Bay" from the 50's and or 60's. The RCA Clear Top is my favorite so far.
Question:	Stupid questiion of the year. How do you use this and what do you use it for
Answer:	Another more pedestrian use is if you have high quality, high impedance headphones and want to listen to a consumer-grade device (e.g. iPod). Standard headphones are around 32Ω impedance, while higher-end ones can be anywhere from 80Ω to north of 600Ω. The device will still drive the headphones, but the sound may be quiet or sound muffled. A headphone amp does what it says on the box, and amplifies the output -- which results in louder and clearer sound on high-impedance headphones.

• Package includes: 4 pieces (4 for Right) open gear bass tuners pegs, mounting hardware (screws, bushings) included. Good replacement for almost electric bass.
• "Elephant ear" bass open gear tuning machines with heavy duty internal gear, sturdy and convenient.
• Easy to install, easy to replace your old or dirty bass tuning pegs. Provide finer tuning and greater stability.
• Tuners with plum blossom shaped button. Made of solid materials with an elegant, vintage and professional look.
• "Elephant ear" bass tuners with smooth 21:1 gear ratio and slotted string posts. Please check the parameter drawing in the attached pics before placing your order.

User questions & answers

Question:	These are the Russian manufactured reissues
Answer:	Hello, this is a great pedal for playing metal. I had mine connected to a Marshall 30CFX with the amp on the clean channel and it sounded great. I play a lot of Black Sabbath, Metallica, and AC/DC. I had the MT-2 and the DS-1 side by side, the DS-1 didn`t even compare so I sold it. I just found the MT-2 to be way more flexible to the point of where I almost bought another one so I could have two side by side. I liked it that much. I thought the gain and distortion on this pedal were very good. You can play anything with this pedal. I also have the Orange Micro Terror and the Dark Terror and I am using a 60 watt Mesa Boogie cabinet. The dark Terror is a high gain amp that needs no pedal and the Micro Terror can take the MT-2, but I prefer without. The Micro Terror is a great rock amp by itself, trust me. I don`t know what you have for equipment, but I wouldn`t use the MT-2 with a tube amp, you would be defeating the purpose of the tubes, solid state pedals and tube amps generally don`t mix well, but that`s just my opinion. I would go to your local guitar shop and try the pedal out on a variety of settings, with different amps to see if you like it or not because it`s about what you like and not what other people think you should have for equipment. Everybody has to find their own sound. Anyways, I hoped this helped and gave you some things to think about before making your purchase, good luck and have fun.
Question:	There are 9 pins or 7 pins on this product-Mullard 12AU
Answer:	No, Boss pedals are never true bypass. They are buffered. Always have been, always will be.
Question:	Do these tube Glow when the room is dark
Answer:	This is question is probably from somebody trying to be a smartarse, but anyway. Playing guitar in church is like playing guitar anywhere else. You try and get the best sound for the style of music and the situation you find yourself in. Find somebody who already in worship bands and ask their advice. Given that modern worship music covers a broad range of styles it could well be appropriate to use this in some situations, it depends on the congregation as well, if it's youth full on in-your-face sounds would be fine. It's all about sensitivity.
Question:	Do you have a matched pair
Answer:	This is a great case, loaded with 5/6 pedals its weight is aprox 20lbs. A little heavy but completely portable and will last forever. There is nothing quite like seeing your goodies protected after a gig when moving you gear. I added small rubber feet to the bottom to keep it from scooting around as I permanently mounted and wired everything to the case. Built like a tank.

Product features

Guyker Bass Machine Heads (4R, 4L, 2R2L or 3R2L) – Open Tuning Key Pegs Tuners Replacement for Electric Jazz Bass or Precision Instruments

"Elephant ear" bass tuners with smooth 21:1 gear ratio and slotted string posts. 14mm-diameter pegholes required. Screws and press-fit bushings included.

Feature:

• Replacement / Upgrade parts for electric Jazz bass or precision instruments.
• Smooth and shiny, wear-resistant, anti-corrosion, and dust-proof, quick and accurate tuning.
• Beautiful shape will make your bass more attractive, help you be more confident in a bass show.
• Exquisite appearance with perfect workmanship and high-tech finish.
• Durable and highly reliable for easy, smooth, and precise tuning.
• With heavy duty internal gear.
• Provides finer tuning and greater stability.
• Quality open guitar machine heads.
• 3 Colors available: Golden, Black, Chrome

Package includes

4/5 pieces (4R, 4L, 2R2L or 3R2L for choose) open bass tuners pegs.

Benfits:

Good replacement for Jazz-Bass or precision instrument.

Dimensions:

Gear Ratio - 1:21. Provide finer tuning and greater stability.

Product description

Economy 4 in line Open Geared bass Tuning Key Set, alloy metal made. Idea for Precision Bass or Jazz Bass Heavy duty internal gear Gear Ratio: 1 to 24 Dimension: approx. 88mm long, 40mm wide, 39mm thick (one tuning key) Package includes: 4 individual tuners,Bushings, Washers and Mounting Screws Included.

• Ideal for Precision Bass or Jazz Bass electric bass
• Fit for common size 14mm（9/16 inch) peg hole
• Material: Metal Alloy;Gear Ratio 24:1; Color: Chrome
• Open gear style, you can assemble it so that custom your own side; 4 in line set, Nut,Ferrule,Screws are included
• Package Content: 4 x Bass Tuning Pegs ；4 x ferrules；4 x screws

User questions & answers

Question:	Would this fit a 2009 squier affinity j bass
Answer:	Absolutely!
Question:	Will this fit a squier vintage modified Jazz bass? The black open gear tuner model
Answer:	I would suggest buying a noise gate for sure volume knob didn’t help but it’s an awesome pedal for sure
Question:	Will these work for an Electra Outlaw mpc
Answer:	It appears the blackout edition is just a "finish" or paint. They are the same
Question:	Would this fit on a 1968 vox skybolt iv v
Answer:	It's a heavy distortion sound

Product description

Economy Sealed Bass Tuning Keys Machine Head Set, alloy metal made. Idea for Gotoh Style Bass.. Package includes: set of 4 individual tuners , Bushings, Washers and Mounting Screws Included.

• Economy sealed bass tuning keys set for Precision Bass or Jazz Bass
• Fits for common size 9/16 inch(14mm) peg hole
• Material:Metal Alloy; Gear Ratio 19:1
• 2x2 Tuners set; Nut,Ferrule,Screws included
• Package Includes:4 x Bass Tuning Pegs ;4 x ferrules; 4 x screws(2R2L)

User questions & answers

Question:	How thick of a headstock will this fit on
Answer:	Sounds like a packaging error. I'd contact the seller for a replacement. Or, you can probably find washers that will fit at Lowes, home depot or ace hardware, but they won't have the same nice polished finish, but you can polish them up by hand.
Question:	My 2x2 chrome bass tuners came without the washers, so they are useless. Is there a way to get the washers
Answer:	Depends on the model of acoustic bass. You'd have to measure the existing tuners or the holes in the headstock. When I installed these in my old Yamaha bass, I had to use a rat tail file to open up the holes in the headstock slightly.
Question:	will these fit an Ibanez acoustic bass
Answer:	9/16" is standard for that style tuner. It's a shade over 14mm.
Question:	Something seems off with the listing specs of a 9/16" hole required . I doubt that would fit into any headstock I have ever seen
Answer:	The zipper broke just in few tries-ended buying a new hard cover

Product description

Product Description



The item is a set of 4pcs professional and practical open gear right bass tuning pegs. They are mainly made of durable hard zinc alloy material, and great for 4 strings bass tuning.



They are quality open gear machine heads which are used to tune up your bass. Also great replacement for your broken or old bass tuners!



Features



* 100% brand new and high quality



* Set of 4 quality chrome tuning pegs for right hand 4 strings bass, This is a vintage open bass tuners.



* 4pcs right hand bass tuning pegs machine heads tuners



* Material: durable hard zinc alloy



* Common size, Gear ratio 1:22, with screws and bushing. Full set.



Package Includes



4 x Bass tuning pegs



4 x ferrules



16 x screws



Note



Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

• Heavy duty internal gear, Economy open gear bass tuning keys set for Precision Bass or Jazz Bass.
• Fits for 13.5mm peg hole, the bushing inner diameter is 18.20mm, outside diameter 19mm, peg length is 30mm. for specific dimensions, please look at the size diagram.
• Zinc alloy material, Gear Ratio: 1:22; Color: Chrome.
• Includes 4pcs open frame right bass tuners. Mounting screws, ferrules and threaded bushings are included.
• Great replacement for the old, broken tuning pegs. Essential accessory of a bass, perfect for you!

User questions & answers

Question:	Will these fit an American jazz bass
Answer:	This doesn’t directly address your question but when I bought this I was extremely disappointed on the quality of it. It is nowhere near the quality that you would expect going from gig to gig. I kept it because I just use it for my duo gigs so I can treat it with kid gloves. Frankly it’s not even designed to be a pedal board as you know it. Only a cheap case like the ones you find at Office Depot
Question:	Can you please add detailed dimensional drawing
Answer:	The cover does come off the unit ....
Question:	Where is this manufactured
Answer:	No it does not take a battery, just a 9v adapter. It draws 17 mA. Cheers

Product description

Feature:

﹣Material: Durable hard zinc alloy.

﹣2 Colors available: Black, Chrome.

Description:

1 YEAR QUALITY GUARANTEE

﹣Replacement / Upgrade parts for electric Jazz bass or precision instruments.

﹣Gear Ratio - 1:22. Provide finer tuning and greater stability.

﹣The item is a set of 4pcs/5pcs professional and practical open gear right bass tuning pegs.

﹣They are mainly made of durable hard zinc alloy material, and great for 4or5 strings bass tuning.

﹣They are quality open gear machine heads which are used to tune up your bass,Also great

replacement for your broken or old bass tuners!

﹣With heavy duty internal gear..

﹣Smooth and shiny, wear-resistant, anti-corrosion, and dust-proof, quick and accurate tuning.

﹣Beautiful shape will make your bass more attractive, help you be more confident in a bass show.

Package Includes:

﹣4 x Bass tuning pegs(4R, 2R2L or 3R2L for choose).

﹣4 x Ferrules.

﹣16 x Screws .

Warm Tip:

﹣Due to lighting effect, monitor's brightness, manual measurement, etc., there could be some slight differences in the

color and size between the photo and the actual item. Sincerely hope that you can understand!

AYUBOUSA brand provides lifetime warranty and friendly after-sale service,makes sure the Risk-free shopping for you.

If you have any questions, please do not hesitate to contact us,We will reply you in 24 hours. In every customer relationship,

AYUBOUSA strives to be a trusted partner and seek to achieve 100% in customer satisfaction.

• Tuners with plum blossom shaped button. Made of Zinc alloy material with an elegant, vintage and professional look.
• Heavy duty internal gear, Economy open gear bass tuning keys set for Precision Bass or Jazz Bass.
• Fits for 14mm（0.55in) peg hole, the bushing inner diameter is 18mm(0.71in), outside diameter is 21mm(0.83in), peg length is 30mm(1.18in). for specific dimensions, please look at the size diagram.
• Gear Ratio: 1:22; Color: Chrome,Easy to install, easy to replace your old or dirty bass tuning pegs. Provide finer tuning and greater stability.
• Package includes: 4 pieces (4 for Right) open gear bass tuners pegs, mounting hardware (screws, bushings) included. Good replacement for almost electric bass.

User questions & answers

Question:	are these pieces manufactured in USA? or in China
Answer:	It might be a tight fit. I do not recommend stepping on this case at all. It is cheaply made but does what it is made for very well but I would not step on this at all.

Product description

Features:

100% new and testing is great.

Mainly constructed of alloy material, anti-rust, anti-corrosion, durable and solid.

Provides a stable pitch, you don’t need to tune frequently or frequently when you use the guitar.

The DISENS bass tuning pegs can ensure that the vibration of the strings is fully transmitted, and to a certain extent make the gradation of the tone fuller.

Easy to install,just slip the string though the hole, tighten the locking thumb wheel, and tune the string.



Material: Metal Alloy

Color: Chrome/Black

Package Includes: 4pcs bass tuning machine heads

• These bass tuning pegs are made of high-quality alloy, anti-corrosion and rust-proof, strong and durable
• DISENS bass guitar string tuning pegs are equipped with non-slip rubber pads to make the strings stable and not easy to loosen
• These sealed bass machine heads can provide comprehensive protection for gears and prolong service life
• Ideal replacement part for electric bass
• Package Includes:4 x Bass Tuning Pegs ;4 x ferrules; 4 x screws；Gear Ratio 19:1

Product description

Features:

100% new and testing is great.

Mainly constructed of alloy material, anti-rust, anti-corrosion, durable and solid.

Provides a stable pitch, you don’t need to tune frequently or frequently when you use the guitar.

The DISENS bass tuning pegs can ensure that the vibration of the strings is fully transmitted, and to a certain extent make the gradation of the tone fuller.

Easy to install,just slip the string though the hole, tighten the locking thumb wheel, and tune the string.



Material: Metal Alloy

Color: Chrome/Black

Package Includes: 4pcs bass tuning machine heads

• Ideal replacement part for electric bass
• These bass tuning pegs are made of high-quality alloy, anti-corrosion and rust-proof, strong and durable
• DISENS bass guitar string tuning pegs are equipped with non-slip rubber pads to make the strings stable and not easy to loosen
• These sealed bass machine heads can provide comprehensive protection for gears and prolong service life
• Package Includes:4 x Bass Tuning Pegs ;4 x ferrules; 4 x screws；Gear Ratio 19:1

Product description

Package Included:

5 x Bass Tuning Pegs

5 x ferrules

5 x screws

• Compatible with: 5 String Guitar Sealed 2L3R Black Keys
• Bass Tuning Pegs Tuners Machine Heads for 5 String Guitar Sealed 2L3R Black Keys
• The outside diameter of the sleeve that fits into the head stock is 13.5 mm- 1/2 inch. The shaft length from the outside of the gear housing is 30 mm- 1-3/16 inch the gear housing is identical to grover and ibanez bass tuners.
• The mounting screw hole for the wood screw is 3/8 inch from the center of the shaft.Nut,Ferrule,Screws are included.
• For 5 string Bass. Set of 5pcs black tuning pegs for 5 strings Bass ,2 Left and 3 Right. Quality sealed Bass Tuners Heavy duty internal gear

User questions & answers

Question:	what metal are these made of
Answer:	Go to this site...http://www.amplifiercovers.com/
Question:	will this work on my ibanez sr 405 model C
Answer:	I have a 1965 twin I've had since 1970 and Yes it fits perfectly. I'm a studio/Session Musician and most every one of Us old farts that still love this old tube dinosaurs take good care of them and this cover meets Our requirements. Good luck and keep Jamming
Question:	The picture show a 3l2r set, yet the specs state that tgis is a 2l3r set. which is correct
Answer:	Hey Traci, I love your amp with the stereo aux input and the stereo headphone out!! And, yes! This cover will definitely fit your Fender Champion 100.-Rick
Question:	What is the OD of head stock, not the sleeve that fits into the head stock
Answer:	I bought this cover specifically for my champion 100 - fits like a glove, good quality and protection.
Question:	Are these equivalent in size to the Gotoh GB
Answer:	I have my Helix Lt in this which just fits. It's snug, but it does fit.

Product description

100percent Brand new and high quality

Set of 4 quality chrome tuning pegs

This is a Vintage Open BASS TUNERS.

In R4 configuration for right handed

Heavy duty internal gear

Gear Ratio: 1 to 24

Material:zinc alloy and plated chrome

Color: Chrome

Package Include:

4 x Bass Tuning Pegs

4 x ferrules

16 x screws

We manufacture all kinds of instrument parts and conduct The direct model so that our price is very low with high quality.

• Material:zinc alloy and plated chrome.
• Set of 4pcs YMC Tuning Pegs.Vintage Open Bass Tuners.
• Compatible with right-handed electric bass.
• With heavy duty internal gear. Gear Ratio: 1 to 24 .
• Mounting screws and ferrules are included.

User questions & answers

Question:	would this fit a t 20 Peavey bass
Answer:	They should fit, Gibson, ibanez basses have smaller holes, Peavy and Yamaha have larger holes.
Question:	Will these fit a fender squire jazz bass
Answer:	Yup. Fender Squier is what I used them on.
Question:	I have an old Electra Outlaw bass. Would they work for it
Answer:	Nice bass!! What you need is 2x2. If you get this you need to flip the 2 tuners to work as 2x2. The base metal will be smaller exposing the old holes. Get a used gibson bass machine heads. Ur bass deserves it!
Question:	Would this fit Epiphone EB
Answer:	I do believe these are the same type of tuners that will fit on the Epiphone EB-04 Those look to be the same tuners that are used on the Fender bass with this exception. On a fender all the tuners go on one side. on the gibson and Epiphone it will be 2 of those tuners will go on one side and 2 of those will have to be reversed to make fit the way Epiphone installs them. NOT to worry. You can do a flip flop with this type of tuner assembly. VERY EASY. Basically what you will do is a minor disassembly and what you will do is take the key part and flip it to the opposite side and reassemble it. That way you will end up with 2 the same on one side and 2 the same on the other side. Take a look at the back of a Fender bass headstock and take a look at the back of the Epiphone headstock for a better idea of what I am trying to say. For all intents and purposes, YES, these will work. The ferules should also press right in. If there are already frules pressed into the headstock then use those already. they should fit perfectly and it will save you time in installation. DO NOT BEAT THE FERRULES IN WITH A HAMMER. PRESS THEM IN. Some times you can do this on a drill press. with a 3/8 drive extension in the drill chuck. You will not need to turn on the drill for this you are only using it as a press. Then add a socket the is about the same size as the ferrule. Then line it us and you may need a helper to hold the bass, Then press in the ferrule. there are also some other methods of ferrule installation. The idea is to not beat on them because if the hammer should slpi and miss the ferrule you wont need to worry about tuners if you break the headstock. So please be careful. You may find some how to videos on You Tube. It it will be a learning experience for you but have fun. Working on your own axe is a right of passage.

Product description

Standard-Highway One Series Bass Tuning Machines, Chrome

• Fender Model#0036400049

User questions & answers

Question:	Do these come with the screws and bushings
Answer:	I have this one with Quilter Mini 101 Reverb, which is the same size as Mini 101, I guess, but smaller than Tone Block in terms of depth. The case has a pad with 4 holes for Tone Block legs that are near corners. So I guess Tone Block fits tightly. For Mini 101 there are two extra smaller holes, so Mini 101 stays in the front side firmly with some space behind back panel. I use this space to keep my 3m power cord, it fits just right. So I would say it's perfect for Minis.
Question:	Will this fit a squier jaguar bass model ics
Answer:	I believe this falls under the Amazon policy as it (typically) gets fulfilled by Amazon.

• Precision 26:1 gear ratio with sealed lubrication, cast housings and metal knobs.
• Mounting hardware (screws, bushings and washers) included.
• Open gear bass tuning machines for electric bass, like jazz Ibanez style bass, precision bass.
• Lightweight compact tuner for smaller bass headstocks with 26:1 gear ratio. Convertible for installation on either side of the peghead.
• Please check the parameter drawing in the attached pics before placing your order.

Product features

Guyker 4Pcs Bass Machine Heads (4R, 4L or 2R2L) – Open Tuning Key Pegs Tuners Replacement for Electric Jazz Bass or Precision Instruments

Precision 26:1 gear ratio enclosed Guyker guitar bass tuners fit for Jazz bass or precision electric bass.

Feature:

• Comfortable and easy for adjustment of string tension.
• Quality open gear bass machine heads.
• Replacement/Upgrade parts for electric bass or precision instruments.
• Smooth and shiny, wear-resistant, anti-corrosion, and dust-proof, quick and accurate tuning.
• Exquisite appearance with perfect workmanship and high-tech finish.
• Provides finer tuning and greater stability.
• Complete with color matched threaded bushings, washers and screws.

Specifications:

• Ratio: Gear Ratio - 1:26
• Style no.: GK-330
• 3 Color available: Chrome, Gold, Black

Note:

• Lubricate the screw threads with cutting lubricant (also wax or a bar of soap) to reduce friction and help them thread properly.

Package includes

4/5 pieces (4R, 4L, 2R2L or 3R2L for choose) open bass tuners pegs.

Benfits:

Good replacement for Jazz-Bass or precision instrument.

Dimensions:

Precision 26:1 gear ratio enclosed Guyker guitar bass tuners fit for Jazz bass or precision electric bass.