11 best ymc ukulele tuners

Product description

YMC universal size ukulele tuning pegs head machine tuners, fits for most all ukuleles.

100% Brand New, Never Used.

Item 100% like the picture shown.

Made with high quality Zinc Alloy metal.

With heavy duty internal gear.

Gear Ratio: 1/17.

The tuner hole diameter: approx. 10mm/0.394 .

4 Pieces (2 for Left + 2 for Right) .

Note: Accessories ONLY, Guitar is NOT included.

Package Includes:

4pcs * Tuner Machine Head(2 for Left + 2 for Right)

4pcs* Ferrules

4pcs* Threaded Bushing

4pcs * Screws

1pc*Ukulele Felt Pick

• YMC universal size Ukulele string tuning Pegs machine head tuners, fits for almost all Ukuleles.
• Made with high quality zinc alloy metal die-cast; With heavy duty internal gear.
• Chrome finish . 4 Pieces (2 for Left + 2 for Right)
• The felt picks are perfect for Ukulele, and other low tension instruments. It picks the strings of the uke great! It is made up of high-grade rigid felt, exclusive high density wool & cotton felt which ensure a mellow authentic sound.
• Package includes: 4pcs * ukulele guitar Tuning Pegs/ machine head (2 Right and 2 Left), 4pcs * ferrule, 4pcs* threaded, 4pcs* screws, 1pc * quality Ukulele Felt Picks.

User questions & answers

Question:	Who makes the pick that comes with this set? It is much softer than my other felt picks and would like to get more
Answer:	Sorry, I mixed them in with my other picks so I don’t know which is which.
Question:	Will these work for a banjolele
Answer:	I don't know anything about banjoleles, but I don't see why you couldn't pick their strings with this pick. It is smaller and thinner than the felt picks I associate with ukes, if that helps.
Question:	Has anyone tried to use these on a Fluke tenor ukulele to replace the old friction tuners they use to come with
Answer:	I used these on a homemade uke and they’re good tuners. I also have a magic flute concert flea. I think these turners are not going to fit on the side headstock. They will be too big and the screw hole will be off the wood. You would have to align them at an angle. I changed the friction tuners out of the flea with peg head tuners and they’re awesome. They are expensive at $75, but worth it
Question:	I had a hard time getting the caps the goes over the posts on the string side of the Uke. I finally got 3 of them on but the 4th cap kept popping off
Answer:	Those have threads to tighten them on with a wrench or pliers. Once tightened they should stay that way. So those need to be more than finger tight. Remember, its not a car, not too tight (just a reminder).

Product description

Note: The color of the item may vary slightly due to photography and your own computer

This is a set of high quality 4pcs tuning pegs machine heads(2R and 2L) for Ukulele guitar

Great replacement for your old and broken tuning pegs machine heads

There is twill on the chrome plate

With 8 Mounting screws in the fitting

Compatible with Ukulele guitar and small 4 string guitar

Main material: Steel and zinc alloy

Button color: black

Hole center to center: approx. 26mm

Shaft diameter: approx. 6mm

Shaft length: 22mm

Weight: 77g



Package includes:

4 x Tuning peg machine head(2R+2L)

8 x Mounting screws

• with Black Button
• With 8 Mounting screws in the fitting

User questions & answers

Question:	Are there installation instructions available for these tuners
Answer:	You simply unstring your uke, unscrew your existing tuners from the headstock, put the new replacement tuners in place and secure them by tightening the screws, being sure not to overtighten them. It's a very simple process. Instructions should not be necessary. If it seems a bit too difficult for you, you may want to see if you can find someone who's mechanically inclined and ask if they'd be so kind as to take care of the installation for you. it's about a 10 minute job, total. Very easy to do.
Question:	How do you know what size they are
Answer:	The size u need for a ukulele.
Question:	Does it have all the pieces you need to replace the tuners
Answer:	Yes, 8 screws and 4 tuners. Technically they are intended for a Ukelele, but they can be used for 3 and 4 string guitars, too.
Question:	does it come with the front piece
Answer:	Define "front piece". The item consists of 1) The part you touch to turn 2) the screw which turns the 3) gear which turns the 4) post where the string is wound. All this secured to the instrument w a 5) plate & 6) screw.

Product description

Item 100% like the picture shown

Set of 4pcs , 2 x 2 tuning keys.

Gold Finish

Fits for ukulele.

Gear ratio: 14:1

For Grover Sta-Tite machine head replacement.

Package include:

4pcs tuning pegs

• A great replacement for your old and broken tuning pegs
• Main material: Steel and zinc alloy
• Gear Ratio: 1:14
• Hole center to center: approx. 26mm
• This is a set of 4pcs Gold plated tuning pegs machine heads 2R and 2L

• Hole center to center: 26mm, Shaft diameter: 6mm. Manual measurement, there may be slight errors.
• With 8 Mounting screws in the fitting
• Please confirm the size before purchasing.
• with creamy-white Button

User questions & answers

Question:	Are these made of real ivory or are they only ivory colored
Answer:	You have to make sure the letter "C" is lit up at the bottom - if it's on any of the other letters it won't work
Question:	Will these fit in a Makala Waterman
Answer:	When it is in tune it sounds smooth.
Question:	Will these fit guitar strings
Answer:	For an intermediate, no. This is an instrument to try at low cost and risk if you're not sure you're going to keep up with it. For an intermediate player who is hooked un ukulele, I'd suggest any of the well-known brands, in the 50 to 100-dollar price range, and if you started on a soprano, you might want to be looking into a tenor or concert size, or a soprano of higher finished quality.
Question:	Will these fit on most ukuleles? i have a cheap makala shark soprano ukulele that i use as a backup to my nicer uke. don't need anything expensive
Answer:	The uke itself, for a plastic ukulele, is of very good quality. It is attractive looking and the fret tuning is good (at least on the one that I got). At 22.5" it is a bit larger than a Soprano instrument, which makes it a little easier to play. It has a pretty good ukulele sound. But if you want a "real' uke made of wood, than you don't want this one. Just be prepared to pay more. I found the case to be a bit cheap, but adequate. I never used the electronic tuner, so I can't answer about that. The song book was a disappointment, very small with not many songs, but it does have a very good cord section that can get you started.

Product description

Note: The color of the item may vary slightly due to photography and your own computer

This is a set of Gold-plated 4pcs tuning pegs machine heads(2R and 2L) for Ukulele guitar

Great replacement for your old and broken tuning pegs machine heads

There is twill on the golden plate

With 8 Mounting screws in the fitting

Compatible with Ukulele guitar and small 4 string guitar

Button color: black(made of plastic)

Shaft diameter: approx. 6mm

Shaft length: 25mm

the fixing screw holes - centre to centre: approx. 26mm

outside diameter of the bush: approx. 8mm

Weight: 84g



Package includes:

4 x Tuning peg machine head(2R+2L)

4 x bush

8 x Mounting screws

• For Ukulele 4 String Guitar
• There is twill on the golden plate

User questions & answers

Question:	What is the gear ratio
Answer:	I have no idea but I do know they work very well!
Question:	Would these be good replacements for the friction tuners that come with the cb gitty “everything but the box” ukulele kit
Answer:	I've used these on home made uses. They're not high end tuners, but they work okay and are easy to install. I'm not familiar with the CB Gitty "everything but the box" kit, so I don't know if the holes are the right size, but, if they are, I think they would work.
Question:	I just received my tuner pegs and the holes on my uke are too small. What size deill bit would i need to make the holes the right size
Answer:	1/4" for just the peg, if you want to use the sleeve on top use 5/16". Personally I use a tapered reamer after I have drilled the 1/4" hole to fit the sleeve tightly into the peg head.

Product description

Features:

Beautiful classical design. Suitable for Ukulele guitar maintenance, replacement and use. The structure is strong and the material is durable. Can be used to replace rusty, broken and old tuning peg machine head. 1:14 copper alloy gears for tuning strings. Very convenient to tuning the strings. Can be used to DIY ukulele.

Specification:

Material: Steel + copper alloy + nickel-copper alloy

Color: as picture shown

Size: Approx. 4.3*2.8*3cm / 1.7*1.1*1.3in

Tuning Pin Diameter: 0.6cm / 0.2in

Weight: Approx. 81g

Package List:

2 x Tuning Peg Machine Head(L)

2 x Tuning Peg Machine Head(R)

4 x Metal Ferrule

8 x Mounting Screws

• 【MATERIAL】:Our Ukulele Tuning Peg is made of environmental friendly high quality Steel , copper alloy and nickel-copper alloy material, sturdy and durable for long term use.
• 【HIGH QUALITY】:100% brand new and high quality. This Tuning Peg for Ukelele is made of high-quality material, which have better performance and longer life with greater flexibility and durability.
• 【PERFECT DIY DESIGN】:The Classical Ukulele Tuning Peg has beautiful classical design. Suitable for Ukulele guitar maintenance, replacement and use.Can be used to replace rusty, broken and old tuning peg machine head.​Can be used to DIY ukulele.
• 【STABLE AND PORTABLE】:Lightweight and portable, easy to carry and space-saving.Easy to install, Size: Approx. 4.3*2.8*3cm / 1.7*1.1*1.3in,1:14 copper alloy gears for tuning strings. Very convenient to tuning the strings.​Can be used to DIY ukulele.
• 【GUARANTEE】If you are not satisfied with our product received, you can apply for unconditional return and refund within 180 days. In terms of any problem of this product, you can send emails to us at any time. We will reply you as soon.

Product description

This is a set of 6 economy-grade open-gear tuners, perfect for use on guitars, cigar box guitars, dulcimers, banjos, diddley-bows and other stringed instruments. They have a nice square-style base plate with decorative flourishes at either endm and a round whtie pearloid button. The shaft has a single hole at the end, and works best on headstocks that are roughly 9/16" thick. The shorter "horned" side of the base plate should be oriented towards the top of the headstock. This set includes 6 chromed plastic bushings/ferrules, and 12 chrome or zinc-plated screws. Three of the tuners are for the left side of a headstock, and three are for the right side. Despite the coloration of the photos, the knobs are white pearloid and the metal parts (aside from the brass gear and black screw) are chrome-plated.

• Good-quality guitar tuners with decorative plates and vintage-style pearloid buttons
• Intended for 3-Left, 3-Right alignment (both sides of the headstock)
• Chrome finish and white pearloid knobs
• Set includes mounting screws and plastic press-fit bushings
• Also great for cigar box guitars and other homemade instruments

User questions & answers

Question:	what is the gear ratio
Answer:	The ratio for these tuners is 16:1

Product description

Kulana Mahogany Soprano Ukulele with Binding and Aquila Strings - Deluxe Series

It's hard to find and instrument that looks good, feels good, and provides professional quality sound without a punishingly professional price.

The Pro series from Kulana Music is one of the exceptions to this expensive rule, though the people you're playing to might suspect you've paid more that you're willing to confess after seeing the beautiful mahogany or zebrawood finish on this intricately crafted instrument.

The included Aquila strings, which capture the classically sonorous sound of gut strings with the convenience, cleanliness, and cruelty-free manufacturing standards of synthetic strings, combine with the shape and superior construction of this ukulele's body to create a mellow, enveloping spectrum of soprano tones that will bring a hint of Hawaii to you and your audience, even if it's snowing outside!

Also available in Soprano Pinneapple (21 Inch); Concert (24 Inch); and Tenor (27 inch) sizes. We also have all of our Ukes in Mahogany and Zebrawood Finishes, as well as Acoustic and Acoustic-Electric types. Choose your favorite Uke today!

Click the Kulana brand link (under the title) to see a complete range of Ukuleles and accessories.

Specifications:

• 344mm Soprano Scale
• 21" Overall body length
• Mahogany body
• Nato neck
• Rosewood Fingerboard and Bridge
• 15 silver nickel frets
• Fret position marks at 5th, 7th,10th, 12th and 15th frets on top and upper side of fingerboard
• Traditional white ABS Binding
• ABS Nut and Saddle
• Die-Cast geared tuners
• Premium Italian Aquila Nylgut strings

Kulana guarantees quality and affordability. Kulana - Say Hello to Music!

• Own a high-quality Professional Soprano Ukulele for an incredibly low price!
• Handcrafted to allow you to create warm, pitch-perfect Hawaiian harmonies.
• Choose between a classic mahogany finish or exotic zebrawood. We also carry Acoustic-Electric ukuleles in the same wood finishes.
• Comes with a set of Aquila nylgut strings installed. Also included is a beautiful Ukulele Gig Bag with Carrying Strap.
• Scroll down the page for full description and specifications of our Handcrafted Kulana Uke.

User questions & answers

Question:	Can I be sure to get a left handed ukulele
Answer:	Most ukuleles are Symmetrical or the same holding one direction or the other. All you have to do to make it left handed is reverse the order you attach the strings. It will come right handed. Just remove the strings and put the bottom on the top the top to the bottom and switch positions of the middle two. So from a right hand perspective it will be aecg instead of gcea
Question:	Why does the picture show a tuner, strap, and picks, and extra strings, if none of that is included
Answer:	It is included. I got them.
Question:	Where is this made
Answer:	China
Question:	What is the sound difference between a soprano and tenor ukulele
Answer:	I don't hear a sound difference. I went to a tenor because it was hard for me to get my fingers on the proper fret.

Product description

TIMESETL Guitar String Tuning Pegs Machine Head Tuners



- Universal size fits for electric or acoustic guitars guitars

- Chrome finish

- Made with high quality Zinc Alloy metal

- With heavy duty internal gear

- 6 Pieces guitar tuning keys (3 for Left + 3 for Right)



Package Includes

6 x Tuner Machine Head(3 for Left + 3 for Right)

6 x Ferrules

6 x Threaded

6 x Screws



Note: Accessories ONLY, Guitar is NOT included.

• Application - TIMESETL universal size machine head tuners fits for almost all acoustic guitars and electric guitars
• High Quality Material - Guitar string tuning pegs made from high quality zinc alloy metal, chrome finish
• Adjustable - Guitar machine heads knobs with heavy duty internal gear can be tuned tight to make your guitar sound stable, perfect for you!
• Simple to Install - Guitar tuning keys set with 3 left and 3 right machine heads and other fixing accessories, which is easy to install
• Package - 6 x guitar machine head (3 Right and 3 Left), 6 x ferrule, 6 x threaded, 6 x screws

User questions & answers

Question:	What is the gear ratio
Answer:	They appear to be 14:1 from what I can tell
Question:	Will these fit a takamine g series
Answer:	I put it on a Yamaha. But I have a takamine g series and the

Product description

YMC universal size guitar tuning pegs head machine tuners, fits for electric or acoustic guitars guitars.

100% Brand New, Never Used

Item 100% like the picture shown

Made with high quality Zinc Alloy metal.

With heavy duty internal gear.

6 Pieces (3 for Left + 3 for Right) .





Note: Accessories ONLY, Guitar is NOT included.

Package Includes:

6pcs * Tuner Machine Head(3 for Left + 3 for Right)

6pcs* Ferrules

6pcs* Threaded Bushing

6pcs * Screws

2pc*Guitar Strap Lock(Random color)

• YMC universal size guitar string tuning Pegs machine head tuners, fits for almost all acoustic guitars and electric guitars
• Made with high quality zinc alloy metal; With heavy duty internal gear.
• Chrome finish. 6 Pieces (3 for Left + 3 for Right)
• YMC Guitar Protector Premium Strap Locks: Work with most OEM strap buttons. Easily slip over existing strap buttons. No need to remove or replace existing strap buttons on your guitar.
• Package includes: 6pcs * guitar machine head (3 Right and 3 Left), 6pcs * ferrule, 6pcs* threaded, 6pcs* screws, 2pcs * quality YMC Guitar Strap Locks((Random color).

User questions & answers

Question:	Are the screw holes straight/perpendicular to the housing, as shown picture 1 & 2. Or, are they angled, as shown picture
Answer:	I bought these (6r) to replace my tuners on my Made in Indonesia Squier Bullet Stratocaster. For me, they were NOT a drop in replacement. The screw holes were close but not close enough to use without filling the old holes and drilling new ones. The tabs you turn for tuning were also a little larger than my originals. Otherwise I think they were good for the price but just not the drop in replacement I was hoping for.
Question:	Again I ask what is the turning ratio for these tuners? Please give actual ratio
Answer:	They are metal as far as I can recall.
Question:	Will these work for s Fender Squier
Answer:	I used them on a Crestline acoustic guitar. Not sure but don't see why they wouldn't work for you.
Question:	Do these fit epiphone style guitars
Answer:	i used them on a rogue and a burnswood both acoustic. you might have to get a mm ruler to determine the if the length of the actual string peg extends enough depending on the width depth of you actual headstock. i'm about to buy another set to use on an old 60's kay acoustic i'm repairing. the mm ruler should only cost like 3 dollars and can be found pretty much anywhere. or use the inch to mm converter on google. and check back the dimensions on amazon to insure proper length. i'm betting they would i have not found an acoustic that they did not work on as of yet.

Product description

Product Description



Set of machine heads for classical guitar and acoustic guitar.



Specifications: 



Color: Chrome & white



Material: Steel & Plastic & Chrome plated



Package size: 14*16cm / 5.51*6.3in



Package weight: 230g / 8.1oz



Installation diameter 6mm



Ratio 1:14 Geared



Location: 3L/3R



Package Included:



3 x Right Guitar machine heads



3 x Left Guitar machine heads



6 x Washer



6 x Screws



100% Brand new, never used, Great upgrade to most any brand classical guitar.



Note:



Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.



Please check all the photos in detail and confirm the size before buying.

• Nickle plated surface with white color plastic buttons, ideal for classical guitar and acoustic folk guitar.
• Shaft diameter: 6mm(0.24in), shaft length: 22mm(0.87in), quality open type machine head, heavy duty gear.
• Gear ratio: 1:14, Steel material, heavy duty internal gear.
• 3 Machine head in a line, 6 pieces tuning keys, 3pcs is for left, 3pcs is for right.
• Ideal to replace your old and dirty tuning pegs and great for classical guitar tuning.

User questions & answers

Question:	Will these fit a regular acoustic guitar
Answer:	They should. These were purchased to replace on a vintage acoustic guitar. They look very much the same as the old ones. Only issue for me was the new ones knobs were reversed and had to be taken apart and changed but was no issue