9 best needles for technics

Product description

A versatile cartridge with Numark value, the CC-1 is suitable for every DJ style. It features the ideal combination of high output and superior tracking, letting you spin or scratch with consistent quality and fidelity. The CC-1 offers DJs superior performance in every situation with a sleek Numark design that's robust and easy to handle. Specifications Frequency response: 20 to 22,000Hz Output: 6mV Channel separation nominal: 28dB DC resistance: 430 ohms/ch Inductance: 400mH/ch Weight: 18.0g Channel balance: within 1.5dB Tracking force: 3g to 6g Recommended load: 47 kΩ 200pf Stylus tip: fine circular diamond Application: high versatility and skip resistance

• Ready for Anything - Professional, highly-versatile cartridge suitable for every DJ style
• Consistent Quality, Enhanced Fidelity - High-output and enhanced tracking ideal for spinning and scratch enthusiasts alike
• Style-Driven Design - Sleek, slim-line design that's robust and easy-to-handle
• Hear Every Detail - Full range frequency response from 20-20,000 Hz
• Robust, Reliable - Precision-engineered circular diamond stylus tip

User questions & answers

Question:	Will this cartridge work with the numark tt1600 turntables
Answer:	My guess would be no, not for a diffuser. It is meant for the bath water.
Question:	will this work on a Numark TT
Answer:	No it doesn’t lather. It is a body oil. You apply after shower while skin is still wet.
Question:	I have a TT 1520 with a stanton discmaster stylus. Will it fit
Answer:	Yes, it’s just like baby oil!
Question:	Will this work with a numark ttusb
Answer:	Yes the velocity of the product is thick shake well before using vigorously that will help tremendously. Thank you for shopping at best hair products 1 2 3. Sandy

Product description

Type: Moving magnetic Black cartridge with diamond stylus and Titanium headshell needle Easy to install; Excellent sound quality and strong tracking ability; Output voltage (at 1k Hz, 5 cm/sec): 5.5 mV +- 3dB; Channel balance (at 1kHz): below 1 dB; Channel separation (at 1kHz): more than 15 dB; Frequency response: 20 ~ 20k Hz; Tracking force: 3.0g (2.5 ~ 3.5g); Stylus Tip: stereo spherical diamond tip

• Complete with fixing bolts and stylus guard
• Up to date design but fits vintage turntables
• Excellent, warm sound quality
• High Quality Headshell, Wire and cartridge
• Technics SL-D1, SL-D1K, SL-D2, SL-D202, SL-D205, SL-D2K, SL-1400, SL-1401, SL-1410, SL-1500, SL-1510, SL-Q202, SL-Q2K, SL-Q3

User questions & answers

Question:	Does this work for a sl Q
Answer:	if your lowrance has the same pins and I think it does it will. it worked on my elite

Product description

The AT81CP allows owners of Technics, Hitachi, Pioneer and similar linear tracking turntables with T4P plug-in connectors to enjoy the high-fidelity sound that only Audio-Technica can offer. Designed specifically for the linear format, the AT81CP features Audio-Technica’s unique dual moving magnet construction. The dual magnet system is combined with the para-toroidal coil construction to assure an excellent sonic clarity and wide channel separation.

• Replacement model for the following cartridges: AT300P, AT3482, AT3482H/U, AT3482P, and AT90CD
• Fits P-mount Turntables
• Conical stylus
• Bonded round shank construction
• 0. 6 mil

User questions & answers

Question:	Will this work with a technics sl-b210 turntable
Answer:	If your turntable has a P-Mount tone arm than any P-Mount (plug-in) cartridge should fit. I believe that you might be able to down load an owner's manual if you go to "vinylengine.com"
Question:	Will this fit the cart for audio technica series v
Answer:	This appears to be the same shape and size as the series V, but I've never tried it myself so I can't 100% guarantee it.
Question:	Will this work for a Technics sl-qd
Answer:	Yes, find a vintage AT90, with alum pipe cantilever; the arm is really low mass, they sound great with a Grado Green P-mount; the speed stability is phenomenal, way much better than modern “Audiophile” >>$$$ stuff...
Question:	i don't have the screw to attach the cartridge. does this come with one
Answer:	It should. Also the cartridge is a tight fit.

Product features

Audio-Technica AT81CP

The AT81CP allows owners of Technics, Hitachi, Pioneer and similar linear tracking turntables with T4P plug-in connectors to enjoy the high-fidelity sound that only Audio-Technica can offer.

Designed specifically for the linear format, the AT81CP features Audio-Technica’s unique dual moving magnet construction. The dual magnet system is combined with the para-toroidal coil construction to assure an excellent sonic clarity and wide channel separation.

Product description

Great Aesthetics – MIRROR PLATED TITANIUM with Brass fittings ****************** Assembled by hand using a world renowned AT dual magnet cartridge producing unbelievable quality for its price ****************** FURUKAWA 5N SILVER LITZ CARTRIDGE WIRES with transparent PTFE Teflon insulation for a huge improvement in sound quality over standard OXF Copper – REGARDED AS THE BEST AVAILABLE (Silver conducts signals faster and with lower distortion than Oxygen free copper)****************** BRASS CARTRIDGE BOLTS are sonically superior to aluminium or steel and add additional mass just where it is needed ****************** Assembled and shipped from the UK.

• Made to order in England exclusively by AudioOrigin
• Top Quality Audio Technica Cartridge, Pure rich, warm sound
• High Quality transparent Furukawa 5N Pure Soft Annealed Silver Litz Cartridge wires – regarded as the best available – see product description below
• Exceptional low and high frequency delivery, superb sound reproduction
• SL-1000, SL-1100, SL-1200, SL-1210, SL-1300, SL-1301, SL-1310, SL-1350, SL-1400, SL-1401, SL-1410

User questions & answers

Question:	Can it be use for scratching
Answer:	It should be
Question:	Is this compatible with strictly Technics, or may I use it on my Roland TT
Answer:	Did not work on mine but call humminbird they will help
Question:	One more question...does the cart come pre-set...angle, etc
Answer:	10 foot cable 14 pin
Question:	I have a technics 1200 sl-1200mk2. will it work with my system and is this a simple plug and play
Answer:	Yes. That’s what I needed it for too.
Question:	Will this guage work for the technics sl 1301 15mm overhang
Answer:	Yes it handles much more than that. It is a 10 gauge wire inside.
Question:	Does this work for a pioneer plx
Answer:	Yes, they can be connected together. I noticed that the connection from the renogy panel to the mc4 cable is sometimes a bit tight and requires a little pressure.
Question:	is this the right gauge for a technics
Answer:	Both MC4 connectors have been installed.
Question:	Will this gauge work for the audio-technica at-lp120? i am being told this tt is a copy of the technics
Answer:	Yes, because tinned copper can simultaneously have higher conductivity, corrosion resistance and oxidation resistance. This can ensure less power loss and extend the life of the wire.

Product description

Replaces Panasonic (Technics) needles EPS-22, 23C, 24CS, 25CS, 27CS, 28CS, 53CS, 202. Used in Panasonic Cartridges AT3482P, EPC-23, 25, 28, 202; P-22, 23, 24, 25, 27, 28, 53S, 128, 153S. Used in Panasonic (Technics) phonograph models: SLB210, SL-7, SL-QLI, SL-Q1, SL-Q15, SL-Q20, SL-Q30, SL-Q200, SL-Q202, SL-Q300, SL-D212, SL-Q303, SL-Q312, SL-Q202, SL-D202, SL-Q202A, SL-D202A, SL-B303, SL-B202, SL-B101, SL-B303A, SL-B202A, SL-B101A, SL-BD22, SL-BD27U, SLBD20, SLBD22, SLBD27, SL-QX200, SL-QX300, SC-A610, SC-A630, SC-A640, SC-A650, SC-A660, SC-A810 thru A870, SC-D310, SC-D320, SC-D330, SC-D340, SC-D350, SC3400, SC3500, SC3600, SC3610, SC3620, SC3640, SC3700, SC3740, SC3800, SC3840, SL5 thru SL15, SL-B5, SL-B10, SL-B20, SL-B30, SL-B100, SL-B200, SL-B260, SL-B300, SL-B500, SL-BL3, SL-D4, SL-D5, SL-D20, SL-D30, SL-D212, SL-D500, SL-DL1, SL-DL5, SL-H306, SL-H307, SL-H308, SL-H403, SL-L26, SL-M1, SP-10, SL-N5, SL-N15, SL-N256, SL-V5

• Used in Panasonic Technics Liner Tracking Turntables
• Tip Material: Diamond. Speeds: 33, 45 RPM
• Tracking Force: 1 to 1-1/2 grams. Color: Orange/Amber. Manufactured in Switzerland
• Pfanstiehl has been in the turntable needle business for over 90 years - longer than anyone else!
• PLEASE NOTE: Make sure the needle that you are buying looks exactly like the one you are replacing, if the cartridge has been changed, the stylus may not fit.

User questions & answers

Question:	Is this the stylus that would be a panasonic type made in japan for my sl-d2 turntable
Answer:	Large is 35 to 43
Question:	is this a mm or mc cartridge
Answer:	White
Question:	Looking for replacement needle for technics sl-bd10is this it
Answer:	Just now measured it. When sitting on the ground it is 1.25" tall. Perhaps they were indicating the size when in the box for packaging.
Question:	I have a technics sl-bd26 turntable from about 1985 or 86. cartridge indicates p24. will this replace this needle? just want to confirm. thanks
Answer:	Battery Replacement1. Use one 3 volt CR2032 lithium battery (as installed).2. Open the battery compartment on the bottom of the scale by pushing the tab and lifting up the cover.3. Remove the old battery from the compartment.4. Place the new battery with the "+" sign up into the battery compartment.5. Push gently down on the compartment cover until it clicks shut.
Question:	I need a replacement for a technics sd22bd, cartridge p34, is this ok
Answer:	The sticker on the bottom of the unit I got for my wife in September, 2019 says Made in China (unfortunately). Technical support (according to the sticker) is provided in the USA via 800 number (though there is surely no guaranty that any 800 number will always and forever go to a US-based support team). That's what the sticker says, at least. I say "unfortunately" above because this is the second unit she's had. the first one simply gave up the ghost after a couple or three years. Remember when a bathroom scale was a generational thing, and you only replaced it when the bath was remodeled and it "looked old?" Yeah, those were the days.

Product description

Type: Moving magnetic Gold cartridge with diamond Conical stylus and Black headshell needle Easy to install; Excellent sound quality and strong tracking ability; Output voltage (at 1k Hz, 5 cm/sec): 5.5 mV - 3dB; Channel balance (at 1kHz): below 1 dB; Channel separation (at 1kHz): more than 15 dB; Frequency response: 20 ~ 20k Hz; Tracking force: 3.0g (2.5 ~ 3.5g); Stylus Tip: stereo spherical diamond tip

• Complete with fixing bolts and stylus guard
• Up to date design but fits vintage turntables
• Excellent, warm sound quality
• High Quality Headshell, Wire and cartridge
• Technics SL-1200, SL-1210, SL-1600, SL-1610, SL-1700, SL-235, SL-23A, SL-B2, SL-B202, SL-B205, SL-B3

Product description

A top quality Moving Magnet Cartridge and Stylus. Specifications: Freq. Resp. 20-20,000 Channel sep. 1kHz > 15dB Downforce 2.5-3.5 gr

• SPARE STYLUS INCLUDED, Brass mounting bolts for better isolation and mass where it is needed
• Up to date design but fits vintage turntables
• Excellent, warm sound quality
• SLQ303, SLQ33, SL20, SL1800, SL1810, SL3200, SL3300, SL3350, SL110, SL1300, SL1301, SL1310, SL1350
• SPARE STYLUS INCLUDED, Brass mounting bolts for better isolation and mass where it is needed

User questions & answers

Question:	Is this diamond tip
Answer:	My husband has never poop in them. So I could not say for sure. But I do know that it hold a lot of pee. I would said that it would hold poop also. But I pray that I never have to see for myself. I can tell you that the side rips real easy. When you or your love one has an accident it should be easy to clean up. When I had to clean up my father, I would do the best I could from the depend, and then had him get in the shower and finish cleaning him up then. Hope this help you. I forgot about my father, Yes the depends does hold poop.
Question:	Will work with an SL1100A
Answer:	Count is the number of underwear in the package. 84 underwear = 84 ct.
Question:	Will this work for my sl-bd
Answer:	Give or take 40 or a little more more. The waste is flexible Don't have an exact #.

Product description

High Quality Headshell, AT-3600L cartridge and stylus, needle for Technics SL 1000, SL 1100, SL 1200, SL 1210, SL 1300, SL 1301, SL 1310, SL 1350, SL 1400, SL 1401, SL 1410 Original Audio Technica AT3600L Phono Cartridge Brand new from factory Inexpensive however a very dynamic and versatile cartridge. Mounting hardware is included Cartridge and Needle Made in China. Original needle features graphite cantilever and diamond tip. Great for all around use or for DJ. Packed in a reusable FLEX container. Shipped safe and secure. Type: Moving Magnet; Fixing: Half-inch mount; Amplifier-connection: Phono MM Stylus: 0.6mm Conical Bonded Diamond tip; Cantilever: Carbon fibre round tube; Tracking Force: 2.5 - 3.5 grams Output Level: 4.2mV @ 5cm/sec. @ 1Khz; Frequency Range: 20 - 20Khz; Load Impedance: 47K ohm Channel Balance: 1.5 dB; Channel Seperation: 20dB @ 1Khz & 15dB @ 10Khz 2cm (H) x 3cm (L) x 1.6cm (W); Weight: 5,7g

Product description

Great Aesthetics - Mirror Plated Titanium with Brass fittings ****** Assembled by hand using a world renowned AT dual magnet cartridge producing unbelievable quality for its price ******* Furukawa Silver Litz Cartridge wires with transparent PTFE Teflon insulation – REGUARDED AS THE BEST AVAILABLE (Silver conducts signals faster and with lower distortion than Oxygen free copper)***** Brass Cartridge bolts are sonically superior to aluminium or steel and add additional mass just where it is needed ****** Assembled and shipped from the UK.

• Made to order in England exclusively by AudioOrigin
• Top Quality Audio Technica Cartridge, Pure rich, warm sound
• High Quality transparent Furukawa 5N Pure Soft Annealed Silver Litz Cartridge wires – regarded as the best available
• Exceptional low and high frequency delivery, superb sound reproduction
• SL-1500, SL-1510, SL-1600, SL-1610, SL-1650, SL-1700, SL-1710, SL-1800, SL-1810, SL-1900, SL-1950, SL-2000

User questions & answers

Question:	Will is work on a sony tabletop FL
Answer:	Just more competition from the Sellers on this one. Except for the color they are the same. Thank you
Question:	I have an old pioneer 518 turn table will this stylus work
Answer:	China
Question:	Will this work great with an older Technics 2000 turntable I purchased with a broken stylus
Answer:	This card does 90MB/s whereas the camera only does ~12.5MB/s(otherwise known as 100 Mbps).
Question:	What’s the difference between moving magnet and dual magnet
Answer:	I have just checked on this by ordering both. The first difference is that I received a paper with a product key for an image restoration software with the regular one. The other difference is in the packaging. The AFFP arrived in a small amazon envelope, whereas the regular one arrives in a SanDisk box. Also, one of the photos shows these cards with a rating of "U1" and one with "U3". When I ordered mine they both arrived as "U3" cards.
Question:	P mount cartridge stylus replacement for a Technics sl D
Answer:	A Canon technician stated that basically this is "overkill" for their cameras. The card will work but the Canon cameras (at least the Elph line) won't take advantage of its extreme speeds.
Question:	Would this fit the cartridge on my Technics SL
Answer:	I bought it because it was $500 less in cost than the Canon. Believe it or not, I use the limited zoom to my advantage. For example, it's my "go-to" lens for sunsets. A week or so ago, I was on a ridge overlooking Eastern Nevada desert with a mountain range in the back ground. I could not move my camera position more than 10 feet. The zoom allowed me to work on composition that I couldn't do with fixed focal length. I've very please with the optical quality. The negative is it weights just over 2 pounds, not my choice for just carrying around!
Question:	i havea technics dc servo automatic turntable system sl-bd27u stylus is eps 24cs do you have it
Answer:	It would be great for landscape photography where you want to expand your field of view. For Astrophotography, I would go with one of their f/1.4 Art lenses. It would be very useful indoors for architectural photography. It would not be my lens of choice for portraits. Wide angle lenses such as this distort the facial features and the subject looks clown-like. For pleasing portraits I would use a wide angle lens in the range of 100 - 200mm, 135mm being the sweet spot for head shots.
Question:	Does the niddle fits a technics turntable model sl-bd20a, with technichs cartridge p
Answer:	Yes. It can be used for either. Portraits can get a little bendy if you're close to your subject but sometimes that's cool.
Question:	Does this fit thr SL-D
Answer:	Yes.
Question:	What is the difference between this one and the one selling for $15.95 and red
Answer:	They're is no "pro" version, just versions I, II and III. Some sellers may use extra irrelevant terms to beef up the advertisement