10 best behringer signal amplifiers

Product description

Professional 4-Channel Active DI-Box

• Professional and multi-purpose 4-channel direct injection box for stage and studio applications
• Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers
• Ultra-flat frequency response due to renowned Behringer OT-1 transformers
• Allows direct connection to speaker outputs with up to 3,000 Watts
• +20 dB gain switch for pre-amplification of low-level signals

Product features

DI4000 V2

• Professional and multi-purpose 4-channel direct injection box for stage and studio applications
• Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers
• Ultra-flat frequency response due to renowned Behringer OT-1 transformers
• Ground Lift switch eliminates typical ground loop problems

ULTRA-DI PRO DI 4000

The ULTRA-DI PRO DI4000 gives you 4 first-class DI channels in a single rack space. Each channel is equipped with two Inputs (XLR and ¼" TRS), a balanced XLR Output – and a ¼" Link output to connect to your amp or monitor console. Plus, the DI4000 is designed to accommodate virtually any input signal, up to 40 dB of switchable input attenuation and up to 20 dB of gain, while our highly acclaimed OT-1 output transformers ensure pristine and powerful output.

PRO-Active

Direct Injection (DI) boxes make it possible to connect guitars, basses and keyboards (as well as other line-level devices) to audio mixers and recorders. The DI4000 takes the DI box to the next level with a special 8 kHz High-Cut filter per channel for guitar applications, along with a Phase Reverse switch for optimal signal alignment. Additionally, our DI4000 active DI features “buffered” inputs that respect your source signal much better than passive DI boxes can – outputting optimally-balanced, extremely low-impedance (600 Ω) signals that are far less susceptible to noise and RF Interference (RFI).

In, XLR Out – There has to be More?

When it comes right down to it, all DI boxes do the same thing, right? Yes, but the DI4000 does much more than just “bass guitar in, mic-level signal out.” It really is a highly versatile input-signal toolkit. Here are just two advantages the DI4000 has over standard DI boxes: Maybe you’d like to connect your guitar amp’s speaker output to your mixer? Not a problem, the DI4000 features two -20 dB attenuation switches per channel, allowing you to connect to speaker outputs rated up to 3,000 Watts – and convert them to balanced XLR outs! Weak incoming signal? The DI4000 has a +20 dB switch, which really comes in handy for boosting low-level input signals to balanced signals with real power and rock-solid impact. Worried about fluctuating voltages in the venue? The DI 4000 is equipped with an internal switch-mode power supply that ranges from 100 to 240 V and automatically adapts to mains voltages wherever you go.

Superior Sound, Incredible Value

The 4-channel ULTRA-DI PRO DI4000 delivers exceptional sound quality.

Product description

Behringer NX6000D 6000W power amplifier - The NX6000D power amplifier packs 6000 Watts (2 x 3000 watts @ 4 Ohms; 2 x 1600 watts @ 8 Ohms) into exceptionally lightweight (13.2 lbs/ 6.0 kg) and rack-mountable packages. Plus, the built-in DSP and 24-bit/ 96 kHz converters ensure the ultimate signal integrity with an extremely broad dynamic range. And because the NX6000D is so much more efficient than conventional designs, It runs cooler and doesn't require the massive heat sinks and heavy toroid Transformers typically associated with its conventional counterparts. Thanks to Behringer “zero-attack” limiters that offer maximum output level With exceptionally-reliable overload protection and SmartSense loudspeaker impedance compensation, which provides fully linear frequency response at any speaker load impedance, you can run the NX6000D full-out for hours on-end. Behringer revolutionary high-density Class-D technology, combined with an ultra-efficient, switch-mode power supply ensure this feather-light powerhouse will drive your rig effortlessly for many years to come. - thanks to Behringer high-density Class-D amplifier technology, they are able to provide you with enormous power and incredible sonic performance in an easy-to-use, ultra-portable and lightweight package. Class-d amplification makes all the difference, offering the ultimate in energy efficiency – and eliminating the need for heavy power supplies and massive heat sinks. This amazing technology makes it possible to design and build extremely-powerful products that are significantly lighter in weight than their traditional counterparts, while using less energy and protecting the environment.

• Delivers 2 x 3000 watts into 4 ohms, 2 x 1600 watts into 8 ohms and weighs less than 13.2 lbs/ 6.0 kg
• Ultimate reliability through revolutionary cool-running high-density Class-D technology with "near-zero" Thermal buildup
• Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption
• High-performance DSP and 24-bit/96 kHz converters deliver ultimate signal integrity and extreme dynamic range
• Dsp section features sophisticated delay, crossover (3 filter types, up to 48 dB/octave), EQ (8 parametric, 2 dynamic), dynamics processing and lockable security settings

User questions & answers

Product features

NX6000D

• Delivers 2 x 3000 Watts into 4 Ohms, 2 x 1600 Watts into 8 Ohms & weighs less than 13.2 lbs / 6.0 kg
• Ultimate reliability through revolutionary cool-running High-Density Class-D technology
• Ultra-efficient switch-mode power supply for noise-free audio, superior transient response
• High-performance DSP and 24-bit/96 kHz converters deliver ultimate signal integrity

NX6000D

The NX6000D power amplifier packs 6000 Watts (2 x 3000 Watts @ 4 Ohms; 2 x 1600 Watts @ 8 Ohms) into exceptionally lightweight (13.2 lbs / 6.0 kg) and rack-mountable packages. Plus, the built-in DSP and 24-bit/ 96 kHz converters ensure the ultimate signal integrity with an extremely broad dynamic range. Thanks to our “Zero-Attack” limiters that offer maximum output level with exceptionally-reliable overload protection and SmartSense Loudspeaker impedance compensation, which provides fully linear frequency response at any speaker load impedance, you can run the NX6000D full-out for hours on end.

Class-D - Massive Power, Perfect Sound

Thanks to our High-Density Class-D amplifier Technology, we are able to provide you with enormous power and incredible sonic performance in an easy-to-use, ultra-portable and lightweight package. Class-D amplification makes all the difference, offering the ultimate in energy efficiency – and eliminating the need for heavy power supplies and massive heat sinks.

NX DSP

For sound engineers requiring high-level control capability, the NX6000D amplifier comes ready for action right out-of-the-box. The built-in DSP and 24-bit/96 kHz converters ensure the ultimate signal integrity with an extremely broad dynamic range. DSP section features sophisticated delay, crossover (3 filter types, up to 48 dB/octave), EQ (8 parametric, 2 dynamic), dynamics processing and lockable security settings. A convenient front panel LCD display allows you to setup and make adjustments directly at the amplifier, without the need for a PC.

NX EDIT Remote Control Software

You can also set up, control and monitor your NX6000D amplifier using your computer via USB – and immediately gain access to a whole new level of amplifier control. NX EDIT is the ideal way to manage installed systems, and to create custom presets for live sound and production environments.

Product description

NOTE :AC Adapter must be 9V DC, 100mA minimum, 2.2 mm plug with negative tip and positive sleeve. Acoustic Amp Modeler / Direct Recording Preamp/DI box

• Analog modeling acoustic guitar preamp/stompbox with DI recording output
• This BEHRINGER product has been designed to compete head to head with leading products on the market
• Authentic tube/microphone modeling circuitry provides the natural warmth and presence, as if your acoustic guitar was miked through a tube pre-amp
• Ultra-musical 3-band EQ with sweepable mids for accurate feedback control and to eliminate the harsh harmonics of piezos
• Super-high impedance to retain maximum signal integrity and dynamics

User questions & answers

Product features

ADI21

• Analog modeling acoustic guitar preamp/stompbox with DI recording output
• This Behringer product has been designed to compete head to head with leading products on the market
• Authentic tube/microphone modeling circuitry provides the natural warmth and presence, as if your acoustic guitar was miked through a tube pre-amp
• Ultra-musical 3-band EQ with sweepable mids for accurate feedback control and to eliminate the harsh harmonics of piezos
• Dual DI mode for either direct recording output with tube/microphone emulation or standard active direct injection box in bypass mode

V-TONE ACOUSTIC DRIVER DI ADI21

For an unplugged sound that’s rich, loud and electrifying, step on the V-TONE ACOUSTIC DRIVER DI ADI21. This amazing little box is essential for piezo-equipped guitars and will make your acoustic guitar sound come to life! The ADI21 combines the features of an active DI (direct injection) box with our proprietary tube/mic emulation circuitry. Enjoy a full 3-band EQ with sweepable mids and a Blend control that allows you to mix the amount of amp and mic emulation you want with your direct signal. And if you prefer the “old-school” approach, just step on the switch and the ADI21 functions as a rather superb active DI box.

Great Sound, Naturally

By their very nature, piezo pickups tend to be very bright, with somewhat reduced bass response and warmth. The ADI21 combines the features of an active DI (direct injection) box with our proprietary microphone/tube emulation. The BLEND control allows you to mix the amount of modeled tone with your instrument’s normal output. The resulting sound is more natural with smooth saturation, just as if your guitar were being mic’ed in the great outdoors.

EQ and More…

Armed with an onboard 3-band EQ, with sweepable mids to keep feedback under control, the ADI21 effectively eliminates the harsh harmonics of piezo pickups. The output is laid out on 1⁄4" TS or balanced gold-plated XLR connectors, which can be used to send a low-impedance signal to the mixing console or straight to tape. You also get a ground lift switch to eliminate annoying ground loop hum problems. You can power this little lifesaver with a 9 V battery or our PSU-SB DC power supply (not included).

Sound Value

Putting some acoustic glory into your recordings or live performances has never been this easy—or sounded this incredible. The ADI21 gives you a full DI, amp/microphone simulation and a 3-band EQ with sweepable mids – a lot of value in one little box! Try the V-TONE ACOUSTIC ADI21 at your local Behringer dealer and find out just how affordable great acoustic sound can be.

Product description

Package Includes: Behringer iNUKE NU12000 Ultra-Lightweight 12000 Watt Power Amplifier Class D Amp Rockvile RCSS1425 25' 14 AWG Speakon to Speakon Speaker Cable 100% Copper Description: The iNUKE NU12000 power amplifiers packs an incredible 12,000 Watts (2 x 6,000 Watts @ 2 Ohms; 2 x 3,400 Watts @ 4 Ohms; 2 x 1,700 Watts @ 8 Ohms) into exceptionally lightweight (26.5 lbs/12 kg) and rack-mountable packages. Because the NU12000 is so much more efficient than conventional designs, it runs cooler and doesn’t require the massive heat sinks and heavy toroid transformers typically associated with its conventional counterparts. Thanks to our “Zero- Attack” limiters, which offer maximum output level with exceptionally- reliable overload protection, you can run the NU12000 full-out for hours on-end. Our revolutionary high-density Class-D technology, combined with ultra-efficient, switch-mode power supplies, ensures this feather-light powerhouse will drive your rig effortlessly for many years to come.

• Features: Delivers 2 x 6000 Watts into 2 Ohms, 2 x 3400 Watts into 4 Ohms, 2 x 1700 Watts into 8 Ohms and weighs less than 26.5 lbs / 12 kg Ultimate reliability through revolutionary cool-running High-Density Class-D technology with "near-zero" thermal buildup Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption Front panel LCD display enables setup and adjustment without PC
• Can be set up, controlled and monitored via front panel USB connector. Powerful remote software downloadable at behringer.com "Zero-Attack" limiters offer maximum output level with reliable overload protection Built-in Subwoofer/Satellite crossover for perfect subwoofer operation Detented and illuminated gain controls for precise level setting Precise 4-segment Signal and Limit LEDs to monitor performance XLR and 1/4'' TRS combination input connectors for compatibility with any source
• Professional twist-lock speaker connectors for ultimate reliability Independent DC, LF and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show “Back-to-front” ventilation system prevents thermal buildup for reliable operation Delivered with Neutrik* powerCON 32A* twist-lock connector (cable not included) 3-Year Warranty Program* Designed and engineered in Germany

Product description

The rackmountable EP2000 EUROPOWER power amp from Behringer delivers up to 2 x 1,000 watts at 2 ohms, 2 x 750W at 4 ohms, and 2,000W at 4 ohms in bridge mode. Its Precise Power, Signal, and Clip LEDs let you monitor performance, and its XLR and 1/4" TRS jacks allow for compatibility with any source. Selectable low-frequency filters let you remove distracting infra-sound frequencies, and its independent DC and thermal overload protection on each channel automatically protects your amp and speakers without stopping the show. The Behringer EUROPOWER's professional speaker connectors and "touch-proof" binding posts support most speaker wiring systems.

• 2 x 1,000 Watts into 2 Ohms; 2 x 750 Watts into 4 Ohms; 2,000 Watts into 4 Ohms (bridge mode)
• ATR (Accelerated Transient Response) technology for ultimate punch and clarity
• Switchable limiters offer maximum output level with reliable overload protection
• Detented gain controls for precise setting and matching of sensitivity
• Precise Power, Signal and Clip LEDs to monitor performance

User questions & answers

Product description

• Ultra-flexible 45-Watt 3-channel PA system / keyboard amplifier
• Powerful 10'' BUGERA speaker for ultimate sound reproduction
• Integrated digital FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
• Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies
• Full 3-channel operation with separate Volume and FX Send per channel

User questions & answers

Product description

• Ultra-compact monitor headphone amplifier for studio and stage applications
• Personal ''more me'' mixer – mix a mic plus a monitor signal and hear them via headphones
• Flexible Mic In and Mic Through connectors plus Ground Lift switch
• Stereo Monitor input with dedicated Monitor Level control and Mono/Stereo switch
• High-power headphone output on 1/4'' and 1/8'' jack connectors

User questions & answers

Product features

Micromon MA400

The ultra-compact Micromon MA400 is the ideal personal monitor mixer for the performer who is always asking for 'more me.' Featuring a flexible Mic In and Mic Thru connectors and Ground Lift switch, as well as stereo Monitor input with a dedicated Monitor Level control and Mono/Stereo switch, the MA400 has everything you need to satisfy even the most-demanding performer on stage.

Connections

The MA400 features XLR Thru jacks and provides superb noise-free operation. Just connect to the Mic Input and send a line from the Mic Thru to your main mixer. You can even use studio-grade condenser mics, as the MA400 will pass +48 V phantom power, if your mixer is so equipped. The Phones jacks accept both ¼ " and 1⁄8" headphone and earbud connections, making the MA400 ideal for hardwired IEM (in-ear-monitor) applications, such as singing drummers and keyboardists. The MA400 comes with a dedicated 12 V DC power supply and an LED to indicate when it is powered up.

Masterful Monitor Mixing

Capable of either stereo or mono operation, the MA400 is a powerful little mixer that allows you to control two independent sources, such as a microphone and the monitor feed from your main mixer. Simply adjust the MA400‘s Monitor Level control.

Small and Superb

The MA400 is an ideal cure for the 'more me' syndrome – both onstage and in the studio. With its flexible routing options and a high-powered headphone output – the MA400 makes an excellent studio tool. Small enough to fit in your pocket with a price tag to match! Check out the Micromon MA400 at your Behringer dealer, or get yours online today – everyone in the band will thank you!

Product description

The rackmount EP4000 EUROPOWER power amp from Behringer delivers up to 2 x 2,000W at 2 ohms, 2 x 1400W at 4 ohms, and 4,000W at 4 ohms in bridge mode. Its Precise Power, Signal, and Clip LEDs let you monitor performance, and its XLR and 1/4" TRS jacks allow for compatibility with any source. Selectable low-frequency filters let you remove distracting infra-sound frequencies, and its independent DC and thermal overload protection on each channel automatically protects your amp and speakers without stopping the show. The Behringer EUROPOWER's professional speaker connectors and "touch-proof" binding posts support most speaker wiring systems.

The EP2000 and EP4000 represent everything musicians love about Behringer's popular EP1500/EP2500--excellent sound quality, road-worthy toughness and reliability, low-noise operation and incredible power. With 2,000 and 4,000-Watts respectively, the EP2000 and EP4000 amplifiers are perfect for medium-sized club gigs, mobile PA systems, church services or public spaces.

Excellent sound quality, road-worthy toughness and reliability, low-noise operation and incredible power. Click to enlarge.

Professional speaker connectors and "touch-proof" binding posts support most speaker wiring systems.

XLR and 1/4" TRS input connectors for compatibility with any source.

Everything You Need, Nothing You Don't

The über-simple front panel controls of these amps give you all of your sound's vital signs at a glance. After flipping the MAIN switch, the POWER LED will light when the amp is ready for action. Both channels have independent gain dials as well as clip LEDs that indicate when the signal is distorted and you need to reduce the gain. There are also SIGNAL LEDs that light up when a signal is present at the input.

Panel Discussion

A panel of switches found on the back panel offers an array of cool options to apply to both channels of the EP2000 and EP4000. The Clip Limiter lets you get even more out of the amplifier without overdriving either it or your speaker system. Built-in circuitry automatically senses when the EP2000 or EP4000 is being overdriven into "clipping" and then momentarily reduces the input level to avoid clipping distortion. This all happens in a few thousandths of a second, so it's an inaudible way of avoiding audible clipping distortion. Of course, you can turn the Limiter off if you're feeling lucky.

Ultra-low frequency sounds (infrasonics) are caused by rickety stage vibrations, mic thumps and wind noise. While technically inaudible, they can cause a huge drain on amp power, potential damage to your speakers and a sludgy sound in the audible bass ranges. Both EP models feature a defeatable Low Cut Filter that chops off unwanted frequencies below 50Hz or 30Hz (depending on your PA system's capabilities).

The same panel contains the switches that allow you to put these amps to work in either stereo or bridge (mono) mode. Both the EP2000 and EP4000 can be linked to additional power amps by switching into parallel mode.

These Amps Have Guts

There's plenty of awesome features on the outside of the EP2000 and EP4000, but there's also a team of cool components on the inside helping it work its magic. They come loaded with famously reliable Toshiba/Fairchild power transistors as well as a high-current toroidal transformer for ultra-high transient response and further reliability. Independent DC and thermal overload protection on each channel automatically protects the amplifier and speakers from any show-stopping meltdowns. There's no need for fuses, giving you one fewer potential mid-gig headache.

The EP2000 and EP4000 have both XLR and 1/4" TRS inputs. Even the outputs are totally flexible, consisting of Speakon-compatible outputs and five-way binding posts. Whether you're dealing with bare wire or boutique audiophile cabling, the EP2000 and EP4000 are right at home.

The exhaust fan, visible on the back panel, is the final stage of an internal front-to-back cooling system that keeps these amps working in the mild temperatures they love, even through periods of extended use. Finally, an impact-resistant, all-steel 2U rackmount chassis helps these workhorses stand up to all the rigors of the road.

Accelerated Transient Response Delivers the Knock-Out Punch

It takes huge pulses of energy (current and voltage) to propel a woofer cone out fast enough to match a bass beat. That's called Transient Response and it's the holy grail of amp designers. By carefully selecting transistors with extremely highslew rates and optimizing other proprietary parts of our circuitry, our amps are able to react instantly to even the most demanding electronic bass impulses. If the woofers in your PA system can keep up, your audience will hear a tighter, crisper, more natural sound.

The Legend Powers On

If you read the reviews of the EP2000 and EP4000's older brothers, the EP1500 and EP2500, and it's clear that those amps are renowned not only for their performance and durability, but also their astoundingly low price tags. The EP2000 and EP4000 extend that legacy to the next level.

What's in the Box

Behringer Europower EP4000, Power Cable, User's Manual

• 2 x 2,000 Watts into 2 Ohms; 2 x 1,400 Watts into 4 Ohms; 4,000 Watts into 4 Ohms (bridge mode)
• ATR (Accelerated Transient Response) technology for ultimate punch and clarity
• Switchable limiters offer maximum output level with reliable overload protection
• Detented gain controls for precise setting and matching of sensitivity
• Precise Power, Signal and Clip LEDs to monitor performance

User questions & answers

Product description

Ultra-Lightweight, High-Density 12000-Watt Power Amplifier

• Delivers 2 x 6000 Watts into 2 Ohms, 2 x 3400 Watts into 4 Ohms, 2 x 1700 Watts into 8 Ohms and weighs less than 26.5 lbs / 12 kg

User questions & answers

Product description

• Ultra-flexible 2-mode selector to switch instruments, amplifiers, effects, etc.
• Easily switch between two input signals to one output or vice-versa (e.g. switch between two guitars using one amplifier or two amplifiers with one guitar)
• Status LED for effect on/off and battery check
• Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
• High-quality components and exceptionally rugged construction ensure long life
• Ultra-flexible 2-mode selector to switch instruments, amplifiers, effects, etc.
• Easily switch between two input signals to one output or vice-versa

User questions & answers