12 best behringer tube amplifier

Product description

Ultimate Tube Amp Modeling Effects Pedal

• Authentic modeling technology for 3 classic guitar amps, 3 gain modes and 3 mic placements for a total of 27 configurations that let you easily achieve the most sought-after tube amp sounds from clean, crunch to super-fat distortion
• This BEHRINGER product has been designed to compete head to head with leading products on the market
• Provides a truckload of great amps in a single stomp box—simply choose your favorite sounds with a flick of a switch
• Dedicated Drive, High and Low EQ, Level, Mic, Model and Amp controls for awesome sound shaping
• Status LED for effect on/off and battery check

User questions & answers

Question:	Is this pedal have reverse polarity
Answer:	No... standard battery power source, mine is powered with a power block, standard in a pedal boards set up. Didn’t require anything special, as for its internal construction I’m in America so plug and play away, you will go through battery’s fast so get a power block some come as sets with everything you need including multiple voltage choices since certain pedals require specific power voltage. Play on...
Question:	Can this be used with an acoustic guitar as well
Answer:	Yes, If your acoustic guitar is equiped with an electronic pickup.
Question:	Can get the distortion of Metallica's "...and justice for all" album with this, palm mute and everything
Answer:	No, it's closer to snarly overdrives than that kind of thrash. You'd wanna try their ultra distortion or ultra metal pedals instead.
Question:	Will this get the same effect as a tube screamer
Answer:	No it won't. Better to buy a tube screamer for that. If you are on a budget the Joyo vintage overdrive will get you closer than this one.

Product description

• Analog modeling bass preamp/stompbox with DI recording output
• This BEHRINGER product has been designed to compete head to head with leading products on the market
• Authentic V-TONE modeling technology capable of dialing up big vintage tube tones, funky slap sounds, crunchy distortions and all in between
• Provides a truckload of great amps in a single stomp box—from traditional bass amps to modern overdriven amp tones that would typically require a multitude of effects units
• Authentic tube emulation circuitry can be mixed with the direct bass signal via blend control

Product description

Revolutionary LIFE TUBE Modeled After the Famous Mullard

• 12AX7 Featuring Incredible Tone, Near Infinite Lifespan and Zero Microphones
• Can replace any 12AX7/ECC83 to dramatically improve tone and performance of your amp
• Near infinite lifespan means no more tube replacements and tremendous cost savings
• Ultimate reliability for your performance as construction is not susceptible to vibration damage

Product description

The TUBE ULTRAGAIN MIC100 is a vacuum tube mic/line preamplifier with integrated limiter for studio, live and hard disk recording applications. It features a carefully selected 12AX7 vacuum tube with UTC technology for exceptional warmth and lowest noise

• High-end preamplification for all microphone, instrument and line-level sources. Complements especially your studio-grade condenser mics
• Perfectly matches your studio, live and hard disk recording setup
• Hand-selected 12AX7 vacuum tube with UTC technology for exceptional warmth and lowest noise
• Ensures outstanding signal transparency when used as a high-end DI-box
• Sophisticated output limiter prevents the output signal from being distorted

User questions & answers

Question:	How much gain does this have
Answer:	Yes, the plug in is available to download on the TC Electronics website but will only be activated if the hardware (this item) is plugged in and present on the host computer.
Question:	Why is this advertised for condenser mics? Pre-amps like this are for dynamic and ribbon mics
Answer:	Hi, Thanks for your interest in the Launch Control XL. The Launch Control XL will work with any DAW that can interpret MIDI input. Although it was primarily designed with Ableton Live in mind, all of the controls are fully customizable and can be mapped to any parameters in Reason: https://support.novationmusic.com/hc/en-gb/articles/360001155365-Reason-10-MIDI-mapping-for-customizing-control . As the Launch Control XL is class-compliant and does not require a driver it will work with Mac operating systems and is supported on macOS 10.8 and above. If you have any issues getting setup with your Launch Control XL, you can contact us directly using the email address [email protected]. Best regards, Laurence Clarke // Novation Technical Support
Question:	power supply included
Answer:	Yes, absolutely. Official instructions/documentation here https://global.novationmusic.com/answerbase/launch-control-xl-hui
Question:	What exactly tube upgrade improve? Any chance to reduce sparking of static noise with tube upgrade
Answer:	Hi, Thanks for your interest in the Launch Control XL. The Launch Control XL will work with any DAW that can interpret MIDI input. Although it was primarily designed with Ableton Live in mind, all of the controls are fully customizable and can be mapped to any parameters in Reason: https://support.novationmusic.com/hc/en-gb/articles/360001155365-Reason-10-MIDI-mapping-for-customizing-control . As the Launch Control XL is class-compliant and does not require a driver it will work with Mac operating systems and is supported on macOS 10.8 and above. If you have any issues getting setup with your Launch Control XL, you can contact us directly using the email address [email protected]. Best regards, Laurence Clarke // Novation Technical Support

Product description

Behringer MIC500USB audiophile vacuum tube preamplifier with preamp modeling technology and USB/audio interface

• High-end pre-amplification for all microphone, instrument and line-level sources. Specifically designed for studio-grade condenser mics
• Perfectly matches your studio, live and hard disk recording set-up
• Ultra-flexible Preamp Modeling allows you to optimize your recordings
• Choose between 16 preamp voicings designed for electric and acoustic guitars, keyboards, bass guitars, drums, vocals and more

User questions & answers

Question:	I'm curious if this would power a dynamic mic such as the Rode Podmic well
Answer:	Being a dynamic mic, there is no "power" needed. The Rode Podmic has a rather high impedance and that might be what you're asking about, but there too, the mic and the preamp are well suited to each other. I bought one when it was on a crazy sale price but I think the better deal is the BEHRINGER U-PHORIA UMC202HD, 2-Channel as it's two channels and a it's little cleaner. The tube doesn't gets you much and the limiter/eq knob is a toy. The UMC202HD is a remarkably good deal and if you ever think you might record two channels at the same time, spent a little extra and be happier in the long run.
Question:	how much headphone impedance/ohms can this power? im planning on using 250ohms-600ohms headphones on these
Answer:	Will be fine
Question:	Can i connect this to a compressor
Answer:	Yes, connections are available
Question:	Does it read and record properly on Facebook live
Answer:	Hi, I have never tried it on Facebook live but I find that it does a decent job of recording - sometimes the signal is too hot; so, one needs to watch out. In terms of noise, it is not as bad as (perhaps due to the cables and the signal). Other than the phone level (I can't remember why I didn't like it - it was some time ago), I am very happy with the product.

Product description

MIC100 Vacuum Tube Preamplifier with Limiter The TUBE ULTRAGAIN MIC100 features low-noise microphone preamp circuitry that uses discrete components for transparent sound, phase reverse function, phantom power supply, LED meter and a switchable pad function. In combination with proprietary BEHRINGER UTC tube technology, the preamp yields low-noise and low-distortion properties. The MIC100 can also be used as a DI-box or to add warmth to standard digital recorders and sound cards.

• High-end tube mic/line preamplifier for studio, live, and hard disk recording applications Hand-selected 12AX7 vacuum tube with UTC technology for exceptional warmth and lowest noise The ultimate sound-enhancing tool for virtually any sound source Perfectly complements studio-grade condenser mics Usage as a high-end DI-box ensures outstanding signal integrity Eliminates the "dull" sound of standard digital recorders and sound cards Dynamic limiter effectively protects you

Product description

• Powerful 15-Watt, 2-channel guitar amplifier with authentic VTC Tube Modeling
• Revolutionary VTC Virtual Tube Circuitry gives you the sound and feel of an authentic tube amp
• Original heavy-duty 8" BUGERA vintage guitar speaker for classic sound reproduction
• 2 full-featured channels offering everything you need from clean to super-fat distortion sounds
• Contour control for radical midrange sweep—from traditional to scooped modern

Product description

• High-end preamplification for all microphone, instrument and line-level sources. Specifically designed for studio-grade condenser mics
• Perfectly matches your studio, live and hard disk recording set-up
• Ultra-flexible Preamp Modeling allows you to optimize your recordings

User questions & answers

Question:	I have a solid state Fender 65R. Would this work with it in daisy chain or in effects loop
Answer:	You cannot daisy chain this, please use the power supply that is made for this because it runs off ac voltage power supply and it takes a lot of amperage. You can connect it to the affects loop.
Question:	Can i use the microphone XLR input and use the 1/4 inch output to allow me to sing vocals through guitar effects
Answer:	Never tried that.It should not matter about the input being XLR and the output 1/4" as long as they are good solid conections.However the outcome,it won't hurt anything to try it...
Question:	Would this device work in a switchable effects loop on a guitar amp to add more grit/gain
Answer:	It would work in effects loop. I use it for that purpose. I use it in effects loop in both my Fender 65r solid state amp, and fender mustang floor. It will not replace an overdrive effects pedal nor it was intended for that. What it does real well is add a little gain, and warmth to your tone without coloring it. The effect is very subtle but pleasantly noticable. It is very subtle even when gain is turned all the way to max, and set in the valve position. So the question, does it improve the tone? Yes. Is it worth $50? Yes. Does it do miracles? No. Does it replace a tube amp or an effects pedal? No.
Question:	Does this come with a power supply
Answer:	Yes, it comes with a DC adapter you plug in to the wall outlet. It's a little weird because it doesn't have an on/off switch, to turn it on or off you just connect or disconnect the power cord.

Product description

Premium and Hand-Selected, Super-Low Noise Dual Triode

• The ECC83 is all about classic European tube tone which led to the famous British sound
• The BUGERA ECC83B is true to its classic roots and authentically designed to the original specs but with super-low audio and microphonic noise
• With its beautifully deep bass, articulate mids and soulful highs, it lends itself to styles such as blues, jazz, fusion and R&B where a rich and warm tone is desired
• If you find your amp too bright sounding with standard 12AX7s, the BUGERA ECC83B may be your tone solution

Product description

The Behringer Vintage Tube Monster VT999 effects pedal has that full-tone roar of a tube engine under its hood, letting you take off with anything from warm blues overdrive to heavy distortion. This high-quality stomp box has the warm sound of a hand-selected 12AX7 vacuum tube. In addition, the VT999 offers an integrated and switchable noise gate with adjustable threshold that keeps your sound noise-free. A status LED for effect On/Off is included, plus there is a true hard-wire bypass for ultimate signal integrity. With this monster engine, your guitar playing will definitely be kicked into monster overdrive. Behringer Vintage Tube Monster Features: Classic tube overdrive pedal based on a hand-selected 12AX7 vacuum tube. This BEHRINGER product has been designed to compete head to head with leading products on the market. Get a whole tube amp in a pedal and take off with anything from warm blues overdrive to heavy distortion. Integrated and switchable Noise gate with adjustable Threshold keeps your sound noise-free. Dedicated Gain, 3-band EQ and Master controls for awesome sound shaping. Blue status LED for effect on/off and battery check. True hard-wire bypass for ultimate signal integrity. High-quality components and exceptionally rugged construction ensure long life. Conceived and designed by BEHRINGER Germany.

The VINTAGE TUBE MONSTER VT999 effects pedal has that full-tone roar of a tube engine under its hood, letting you take off with anything from warm blues overdrive to heavy distortion.

Take off with anything from warm blues overdrive to heavy distortion.

On-Board 12AX7 Tube This high-quality stomp box gives you the warm sound of a hand-selected 12AX7 vacuum tube. With this monster engine, your guitar playing will definitely be kicked into monster overdrive. Dial in the amount of tube gain you want and use the master level control for volume. EQ Control Treble, Mid, and Bass EQ controls let you tweak your sound further, so you can shape just the sound you want. Noise Gate In addition to the tube distortion, the VT999 offers an integrated and switchable noise gate with adjustable threshold, to keep your sound noise-free. True Bypass The VT999 features a true hard-wire bypass for ultimate signal integrity. What's in the Box Behringer VT999 Pedal, User's Manual

• Classic tube overdrive pedal based on a hand-selected 12AX7 vacuum tube
• This BEHRINGER product has been designed to compete head to head with leading products on the market
• Get a whole tube amp in a pedal and take off with anything from warm blues overdrive to heavy distortion
• Integrated and switchable Noise gate with adjustable Threshold keeps your sound noise-free
• Dedicated Gain, 3-band EQ and Master controls for awesome sound shaping

User questions & answers

Question:	Can you plug straight into a passive speaker cab with this and get any sound
Answer:	I would say that you might be able to plug into the FX Return of an amp and just use the power amp section. Otherwise, you would still need a clean power amp. I used to do that with my SansAmp BDDDI all the time.
Question:	The led just flashes forever, changed the tube, thinking bad pedal
Answer:	the LED should only flash until the tube is warmed up. Might want to try another tube. Did it keep flashing with the original tube?Bear in mined that I tried swapping a few tubes including NOS ones, and preferred the one it shipped with. YMMV...
Question:	Its possible get a big muff violin like sound with this pedal
Answer:	I don't think so. This pedal, amazing by the way, is an overdrive and gives you a good sustain but it's different than big muff's violin sound. The proposal and the sound are different because big muff is a fuzz pedal. It's architecture and circuits are different.
Question:	Can this unit be used for harmonica playing also
Answer:	Any overdrive pedal can be used to create an overdrive sound to a harmonica mic provided it's wired for a high impedance 1/4 phone jack. It should be noted that any mic used with overdrives or overdriven amps are more prone to feedback.

Product description

The rackmountable EP2000 EUROPOWER power amp from Behringer delivers up to 2 x 1,000 watts at 2 ohms, 2 x 750W at 4 ohms, and 2,000W at 4 ohms in bridge mode. Its Precise Power, Signal, and Clip LEDs let you monitor performance, and its XLR and 1/4" TRS jacks allow for compatibility with any source. Selectable low-frequency filters let you remove distracting infra-sound frequencies, and its independent DC and thermal overload protection on each channel automatically protects your amp and speakers without stopping the show. The Behringer EUROPOWER's professional speaker connectors and "touch-proof" binding posts support most speaker wiring systems.

• 2 x 1,000 Watts into 2 Ohms; 2 x 750 Watts into 4 Ohms; 2,000 Watts into 4 Ohms (bridge mode)
• ATR (Accelerated Transient Response) technology for ultimate punch and clarity
• Switchable limiters offer maximum output level with reliable overload protection
• Detented gain controls for precise setting and matching of sensitivity
• Precise Power, Signal and Clip LEDs to monitor performance

User questions & answers

Question:	Can you hook up 4 8-ohm speakers to this ep2000? if so, in parallel or in series? is the 2,000 watts rms or peak
Answer:	yes
Question:	I got the ep2500 version. manual states bridged 4ohm=2400w. will this drive a kicker comq 15" 2 ohm cwq15 (1100rms) in sealed 6ft^3 box in my garage
Answer:	check sticker or buy uk version
Question:	is this product 120 volt or
Answer:	Technically, it does not. I will paste the statement of 1 reviewer (Nathan) that pretty much sums it up. "You have to make your own power cord given the supplied Neutrik connector. A few feet of 10 gauge wire and a 20 or 30 amp end to plug it into 120v or 220v respectively and you are set."
Question:	If i have 2 passive speakers (250w cont/1000w peak) will a 2000 watt amp be cutting too close? Should i go with a 4000 watt model
Answer:	Yes it will

Product description

Ultra-compact 300-Watt 2-channel bass amplifier

• Ultra-compact 300-Watt 2-channel bass amplifier
• Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and ultra-lightweight
• Clean channel with dedicated Gain control
• Distortion channel with dedicated Gain, Shape and Level controls
• Ultra-musical, active 7-band graphic EQ with FBQ Spectrum Analyzer

User questions & answers

Question:	does this come with a footswitch
Answer:	Yes ! footswitch is included
Question:	What is the amp made of? I.e. Plastic, metal, veneer, etc
Answer:	The case is black high-impact plastic.
Question:	How many ohms is the "Behringer BXD3000H Bass Guitar Amplifier Head" for its connection to a speaker cabinet
Answer:	The BXD3000H operates at 300 W @ 4 Ohms or 180 W @ 8 Ohms.
Question:	Is there a fan on the rear or is this just a ventilation grille
Answer:	not so great in a live situation if you play rock power amp clips about a second at a time but there is a fan in it on the back

Product features

BEHRINGER BXD3000H Ultra-Lightweight 300-Watt 2-Channel Bass Amplifier

• Ultra-compact 300-Watt 2-channel bass amplifier
• Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and ultra-lightweight
• Clean channel with dedicated Gain control
• Distortion channel with dedicated Gain, Shape and Level controls
• Ultra-musical, active 7-band graphic EQ with FBQ Spectrum Analyzer
• Revolutionary ''see what you play'' FBQ frequency indicator for instant sound shaping
• Switchable Ultrabass subharmonics processor for unbelievable low-end power
• Integrated Compressor smooths out volume peaks when playing dynamic slaps
• Dual footswitch for channel select and Ultrabass function included

Onboard 7-Band FBQ Equalizer

FBQ Equalizer allows you to “see-what-you-play”. In normal mode the individual frequency bands can be raised or lowered to fine-tune your sound; but when you engage the FBQ button, you get the power of a dedicated spectrum analyzer right at your fingertips.

Now the LEDs on the frequency sliders illuminate in varying levels of intensity, showing you exactly which bands need to be adjusted for optimal performance.

This is especially handy for eliminating the low-frequency feedback typically associated with hollow-body, electric-acoustic and upright basses.