12 best andoer acoustic guitar pickups
Andoer is a brand that produces a variety of musical equipment and accessories, including acoustic guitar pickups. Acoustic guitar pickups are devices designed to capture the sound of an acoustic guitar and convert it into an electrical signal that can be amplified or recorded. These pickups are particularly useful for live performances, as they allow the guitarist to be heard clearly in larger venues.
Andoer offers a range of acoustic guitar pickups designed to cater to different needs and preferences of guitarists. These pickups can be easily installed on acoustic guitars to enhance their sound and make them suitable for amplification. Some of the key features and types of Andoer acoustic guitar pickups include:
Soundhole Pickups: These pickups are usually mounted in the soundhole of the guitar and are easy to install. They capture the vibrations of the guitar's strings and body, providing a warm and natural acoustic tone.
Piezo Pickups: Piezo pickups are known for their clear and bright sound.They work by sensing the vibrations of the guitar's bridge saddle and translating them into an electrical signal.
Microphone Pickups: Some Andoer pickups incorporate a small microphone element along with a piezo pickup, allowing for a blend of the natural acoustic sound and the clarity of the piezo.
Magnetic Pickups: These pickups use magnets to capture the string vibrations and provide a unique, electric guitar-like tone when installed on an acoustic guitar.
Preamps: Andoer also manufactures preamps that can be used in conjunction with their pickups. Preamps allow for fine-tuning the guitar's tone and volume before sending it to an amplifier or PA system.
Feedback Control: Some Andoer pickups come with feedback control features to help reduce unwanted feedback and noise, which can be especially useful in live performance situations.
It's important to note that the specific models and features offered by Andoer may vary over time, so it's a good idea to check their official website or consult product reviews for the most up-to-date information on their acoustic guitar pickups and related products. These pickups can be a valuable addition to an acoustic guitarist's setup, providing versatility and enhanced sound quality for various playing scenarios.
Below you can find our editor's choice of the best andoer acoustic guitar pickups on the marketProduct description
Specifications:
Features: 3 Band EQ/ Chromatic tuner/ Phase/ Reverb&Delay&Chrous&Wide Effects
Input Impedance:10M
Frequency Response: 20Hz?0KHz
Control Range: Low: +/-12dB at 100Hz ;Middle: +/-12dB at 800Hz ;High: +/-12dB at 3KHz
Low Battery Check: LED
Battery Life: over 20hours
Power Supply: 9V Alkaline Battery (not included)
Pick-up: Piezo ceramic pick-up
Output Jack: 6.35mm
Dimension: 5.2 * 5.4cm / 2.05 * 2.13in(W * L)
Item Weight: 108g / 3.81oz
Package Size: 15.2 * 8.2 * 4.3cm / 5.99 * 3.23 * 1.69in (L * W * H)
Package Weight: 228g / 8.05oz
Package List:
1 * 3-Band EQ Equalizer
1 * Battery box
1 * Piezo pickup line
2 * Cut-out template
8 * Mounting screws
1 * User Manual (English & Chinese)
- Tone and volume control.
- With phase and tuner function, built-in reverb, delay, chrous and wide effects.
- 3-band equalizer, rotate Low/Middle/High to adjust volume frequency.
- Rotate Reverb/Delay/Chorous/Wide button to adjust its corresponding reverb, delay, chrous and wide effect.
- Wide frequency range from 20 HZ to 20 kHZ.
User questions & answers
Question: | My volume control was bad after about an hour. I'm wondering if I bought another one do you think it might work |
Answer: | The tuner is chromatic so even if you can’t adjust it you could always figure out how far off one led is (so if 1 light off is by say -4 you could detune 1 light flat to get 436 and so on with each led flat or sharp) by using another tuner that is capable of adjustment or has an anolog readout. |
Question: | Was this not supposed to come with an installation guide |
Answer: | you can use it for a semi hollow body, might have to dial the gain back a bit but you should be fine |
Question: | can I plug both pickups from my takamine split bridge |
Answer: | It does not. You will need a 9v dc adapter |
Question: | Does it come with a pickup |
Answer: | I do not know what they do. I normally leave them at "twelve o'clock", but I'm to play a gig right now, so I'll play with them a bit and get back to you. *** Ok, back from the gig. I tried a number of different setting combinations for the notch filter and the gain knobs, with little detectable difference that I could hear. I set all three knobs back to the "twelve o'clock" position. I am happy with my L.R. Baggs Venue DI. It produces a quality amplified acoustic sound that is considerably better than simply plugging directly into a portable amp such as my Line 6. |
Product description
Specifications:
Package size: 22 * 14 * 5.5cm / 8.7 * 5.5 * 2.2in
Package weight: 125g / 4.4oz
Package List:
1 * 4 Band EQ Equalizer
1 * End Pin Jack
4 * Mounting Screws
1 * Screw Cap
1 * Metal Washer
1 * Sticky Plate
- 4-Band Equalizer, push bass/middle/treble to adjust frequency.
- Phrase and volume control.
- LED for battery check, replace battery when Batt lights.
- Powered by a 9V battery (not included).
User questions & answers
Question: | Includes screws for installation |
Answer: | I did not recieve screws with mine. |
Question: | Includes screws for installation |
Answer: | No, it's not included |
Question: | Can I install this on a regular guitar and use it I'm not sure how this would work tbh |
Answer: | Should be fine. I built some CBGs and glued the pickup on the inside of the top under the bridge. I have not installed one on an existing guitar. |
Question: | Can this used for classical guitars |
Answer: | Yes, i just build my 8th classical guitar using this EQ-7545R and the result is fantastic. Low noise and distortion and the classical sound when played without amplification is still goodthe pickup under the bridge bone doesn't afect the acoustic sound negatively |
Product description
This pickup is designed for folk guitar.
Specifications:
Jack diameter: 6.35mm / 0.25in
Package size: 12 * 7.8 * 1.5cm / 4.7 * 3.1 * 0.6in
Package weight: 24g / 0.8oz
Package List:
1 * Pickup
- 6.35mm / 0.25in durable jack.
- Mounted at the inside edge of saddle without need to drill hole.
- Ideal for folk guitar.
User questions & answers
Question: | is it a stereo jack or a jack for a guitar amp |
Answer: | Its a mono jack, which is use for a guitar amp. |
Question: | Will this work in a baby Taylor |
Answer: | Yes. I put one similar to this in my baby Taylor. It was a Martin fishman. It was disappointing. I put one of these in a Martin guitar today and it is awsome! I ordered the last 3 they had in stock for my other guitars, including my baby Taylor. I think you will love it. Big dollars doesn't equal big sound or quality. |
Question: | Can i use this with nilon acoustic guitar |
Answer: | I used it on steel string guitar but since it is piezo pick up so it should work on nylon string as well. |
Question: | How do I attach it to the guitar abutting the saddle |
Answer: | The pickup goes under the saddle. You will probably have to reduce the height of the saddle after installation. |
Product description
Features:
This equalizer preamp helps to adjust the tone and volume of your guitar.
You can spend less time tweaking controls and more time playing.
You can control bass, treble and volume.
Low battery signal, the low batt will light when it is in low power condition.
1 pick to amplify the sound.
1 small sticky plate helps to fix the power leads.
4 mounting screws connect the guitar firmly.
Connecting wire with 6.35mm plug.
Powered by 9V Alkaline battery (not included).
Specifications:
Bass: +/-12dB at 100Hz
Treble: +/-12dB at 10KHz
Power: 9V AIkaline battery
Battery Life: Over 350 hours
Pick?up: UK-2000?Piezo cable pick-up?
Item color: Black
Item size: 6 * 4 * 5cm / 2.4 * 1.6 * 2in
Item weight: 58g / 2oz
Package size: Approx. 11 * 7 * 6cm / 4.3 * 2.8 * 2.4in
Package weight: 76g / 2.7oz
Package list:
1 * EQ
1 * Connecting Cable
1 * pick
4 * Mounting Screws
1 * Screw Cap
1 * Metal Washer
1 * Sticky Plate
1 * Cable Tie
Note:
The batteries are not included.
- Helps to adjust the tone and volume of your guitar.
- Less time tweaking controls and more time playing.
- Control bass, treble and volume.
- With low battery signal.
User questions & answers
Question: | Can this be used as an audio pre-amp, not using a piezo-electric pick-up |
Answer: | I used it with an under-the saddle piezo pick-up. I guess if the resistance is right, it can be used as a pre-amp with other types of pick-up but I have not tested that. |
Product description
Specification:
Input impedance: 2.2M?
Frequency response: 20 HZ - 20 kHZ
Control range:
Bass: ± 12dB at 60 HZ
Midd 1 : ± 12dB at 500 kHZ
Midd 2 : ± 12dB at 600 kHZ
Treble: ± 12dB at 3 kHZ
Presence: ± 12dB at 10 kHZ
Package size: 12 * 12 * 8cm / 4.7 * 4.7 * 3.1in
Package weight: 151g / 5.32oz
Powered by 9V Alkaline battery (not included).
Package List:
1 * 5 Band EQ Equalizer
1 * Battery box
1 * Piezo Pickup Line
8 * Mounting screws
- With this equalizer, you spend less time tweaking controls and more time playing.
- Shape sound and eliminate feedback with 5 bands of equalization.
- With bass, middle 1, middle 2, treble, pres control knobs.
- Wide frequency range from 20 HZ to 20 kHZ.
- Easy to read metronome on LCD display.
User questions & answers
Question: | what are the cutout sizes required for both the device and battery box |
Answer: | Yes |
Question: | Will this work on an acoustic bass |
Answer: | Yes, It works. |
Question: | Will this work with a tenor ukulele |
Answer: | Yes |
Product description
Specifications:
Color: Red + white
Material: Shell: ABS Sound board: Celluloid Coil: Copper Knob: Plastic
Weight: 106g
Size: 12 * 3 * 2.2cm
Package including:
1 * Sound Hole Magnetic Pickup
2 * Mounting screw
2 * Knob
- Designed with red chelonian shell, small and exquisite, it is convenient to carry.
- With ABS material in shell, celluloid in sound board.
- Matched with copper coil, two plastic knobs and two mounting screws.
- High quality warranty, excellent durability.
- Suitable for folk guitar, acoustic and electric guitar.
User questions & answers
Question: | Is this already put together (electrically |
Answer: | Yes it is fully assembled and ready to install!!! Works and sounds great! |
Question: | Does this need a specific set of strings for the sound to be picked up through the pickup |
Answer: | No on this case if your strings are old. Just replace regular strings for the sound better |
Question: | Will it fit my Kingston |
Answer: | Fits a standard guitar |
Question: | Do you have to drill holes in the guitar to install this |
Answer: | Yes unless you’re going to put it where the old pickup is |
Product description
This acoustic classical guitar amplifier soundhole pickup absolutely a must have for all acoustic guitarists! Pick up the sound from guitar string vibration and then transfer the sound directly into your existing tuner/amplifier/speaker at a good signal. The pick-up clips onto the edge of the sound hole of your guitar and is essential for tuning up in noisy surroundings.
Specifications:
Item Type: Classical acoustic guitar pickup
Fit Guitar: Classical/ acoustic guitar
Cable Length: Approx. 5M/ 16.4ft
Jack: 6.3mm
Color: Black
Weight:130g/ 4.6oz
Package list:
1 * Soundhole pickup
Note: Please kindly be aware the amplifier/speaker/tuner is not included.
- Fit acoustic and classical guitars.
- Can also work with most tuners that have a 6.3mm jack input.
- High-sensitive and low-noisy pickup.
- No drilling hole required, easy to install, just clips onto the edge of the sound hole of your guitar.
Product description
This item can be attached on any type of acoustic instrument equipped with a flat soundboard. Transparent tone is achieved with the transducer for guitar.
Features:
Specifications:
Material: Metal
Sensor Diameter: Approx. 2.7cm /1in
Shaft Thread diameter: Approx. 2cm /0.8in
Full Length: Approx. 30cm /11.8in
Item Weight: Approx. 8g /0.29oz
Package Size: 6.5 * 6 * 2.2cm / 2.6 * 2.4 * 0.9in
Package Weight: 10g /0.35oz
Package List:
1 * Guitar Transducer
- This transducer pickup which has been specially designed for acoustic instruments, is a very little device lets you turn your acoustic into an electro-acoustic, giving your instrument a new lease of life for amplification purposes.
- Fit for almost string music instruments such as guitar ,violin ,mandolin ,banjor etc. Remove the plastic film from the back of the transducer to expose the adhesive.
- Place the transducer through the sound hole to the lower part of the front body where the guitar produces the best tonal response. Be sure to remove any dust before placing pickup will reproduce a full, natural, transparent tone.
- Pickup senses the microvibrations of a soundboard.
- Easy to install, convenient to use.
User questions & answers
Question: | Would this pick up work for a stomp box |
Answer: | Yes, most definitely. Keep in mind that these pickups are"hot". Meaning, they pick up every sound from the instrument. I use them for cigar box guitars, hand movements on the neck are picked up. And being to close to an amp, they will squeal. |
Question: | Would this work for making a stomp box |
Answer: | Basically this will work, however this Piezoelectric disc acts as a mini receiver, the problem with this unit is it has no volume or tone, it just connects to the amp, and you have to adjust the amp volume to control the stomp volume. If you are using a single amp with a guitar this is going to create a conflict when adjusting the volume. There are many different types of piezoelectric disc's that are better, contact me if you need more info, John |
Question: | Need a preamp |
Answer: | No, it can be wired from the guitar into your amp. You should realize that a piezo pickup, which this is, is a bit dicey to use as to the sound quality reproduction. They pick up almost every sound, very similar to a microphone. I used to use them in my Cbg builds, but they are so touchy that I now use magnetic pickups exclusively. If you are just wanting a quick way to amp up your guitar or other stringed instrument, this will work and they are cheap and easy to install. If you need more info feel free to email me any questions you have @ John 88fokker313@ gmail.com |
Question: | does it come with a nut for the jack |
Answer: | I am not sure the picture is so poor that's it's impossible to tell just from that picture. But if it doesn't you have a real problem trying to find a matching washer and nut to secure it to your guitar or whatever you are using it for. I have been building cigar box guitars for quit a while and I buy mine from eBay which costs less and come complete with nut and washer. There are even some that come prewired with volume and tone control if you are handy those work well. If you need a simple pickup then try eBay, they all come from China,. If you can't find the eBay site contact me at [email protected] for further help. Att. Doc. Hope this helps |
- Acoustic guitar pickup with 12-hole magnetic transducer, can capture vibrations quickly.
- Designed with a tone and volume controller for more accurate pickup.
- Easy to install, put pickup into sound hole and adjust padded metal piece.
- No need to drill hole and no scratch to your guitar.
- Suitable for 38"-41" guitars with steel strings.
Product description
Specifications:
Features: Passive
Frequency response: 20Hz-20KHz
Volume: A500KΩ
Tone: B500KΩ
Pick-up: Piezo ceramic pick-up
Item color: Black
Item size: 6 * 3.5 * 3.5cm / 2.4 * 1.4 * 1.4in
Item weight: 62g / 2.2oz
Package size: Approx. 11 * 7 * 6cm / 4.3 * 2.8 * 2.4in
Package weight: 81g / 2.9oz
Package list:
1 * EQ
1 * Pick
2 * Mounting Screws
1 * Screw Cap
1 * Metal Washer
1 * Sticky Plate
1 * Cable Tie
- This equalizer helps to do passive tone and volume control of your guitar.
- You can spend less time tweaking controls and more time playing.No need of battery.
- 1 pick to amplify the sound. 1 small sticky plate helps to fix the power leads.
- 2 mounting screws connect the guitar firmly.
- The wire plug is 6.35mm.
Product description
Specification:
Input impedance: 2.2M?
Frequency response: 20 HZ - 20 kHZ
Control range:
Bass: ± 12dB at 60 HZ
Midd: ± 12dB at 500 kHZ
Treble: ± 12dB at 3 kHZ
Presence: ± 12dB at 10 kHZ
Package size: 11.5 * 11.3 * 7.7cm / 4.5 * 4.4 * 3in
Package weight: 146g / 5.17oz
Powered by 9V Alkaline battery (not included).
Package List:
1 * 4 Band EQ Equalizer
1 * Battery box
1 * Piezo Pickup Line
8 * Mounting screws
- With this equalizer, you spend less time tweaking controls and more time playing.
- Shape sound and eliminate feedback with 4 bands of equalization.
- With bass, middle, treble, pres control knobs.
- Wide frequency range from 20 HZ to 20 kHZ.
- Easy to read metronome on LCD display.
User questions & answers
Question: | Regarding: andoer eqlc-4 4-band eq guitar preamp piezo- anyone use this through a samll home stereo/bookshelf speakers or 15 watt studio amp |
Answer: | This is made for a guitar. Its mono not stereo, so it probably wouldn't work too well and would have to be modified and require two of them. (One for each channel) Probably not worth trying but hey, who am I to say. I've never tryed it. |
Product description
This pickup set includes a magnetic pickup, a microphone and an audio cable. It is design for 38"/39"/40"/41"acoustic guitar.
Features:
12-hole magnetic transducer captures vibrations quickly and converts mechanical vibrations to an electrical signal.
Easy to install, put pickup into sound hole and adjust padded metal piece to fix it stably without scratch and need of drilling hole.
Passive design, without need for external power.
Lapel clip microphone with cable of about 1 meter allows you to sing while playing guitar.
Comes with an audio cable (3.5mm-6.5mm), approx. 3 meters in length.
Volume controller with a clip has two 3.5mm female connectors- one for connecting microphone while the another for speaker.
Design for 38"/39"/40"/41"acoustic guitar.
Specifications:
Audio cable length: 300cm / 9.8ft
Microphone cable length: 100cm / 3.3ft
Pickup size: Approx. 13 * 3 * 1cm / 5.1 * 1.2 * 0.4in
Volume controller size: 6 * 4 * 3.5cm / 2.4 * 1.6 * 1.4in
Package size: 13.5 * 9.5 * 4cm / 5.3 * 3.7 * 1.6in
Package weight: 227g / 8oz
Package List:
1 * Pickup (with volume controller)
1 * Microphone
1 * Audio Cable
- 12-hole magnetic transducer captures vibrations quickly and converts mechanical vibrations to an electrical signal.
- Easy to install, put pickup into sound hole and adjust padded metal piece to fix it stably without scratch and need of drilling hole.
- Passive design, without need for external power.
- Lapel clip microphone with cable of about 1 meter allows you to sing while playing guitar.
- Comes with an audio cable (3.5mm-6.5mm), approx. 3 meters in length.
Latest Reviews
View all
Kitchen Step Trash Cans
- Updated: 13.02.2023
- Read reviews

Lazy Susan For Table With Compartments
- Updated: 12.04.2023
- Read reviews

Power Supplies For Gaming Pcs
- Updated: 15.03.2023
- Read reviews

Panel Screens
- Updated: 12.01.2023
- Read reviews

Schwinn Mtb Tires
- Updated: 08.06.2023
- Read reviews