12 best wells pumps

Product description

1HP, 230V/60HZ/1PH, 7 stage, 30 GPM Max, 207 feet head, Mid Intake, S.S. SHELL C.I Intake, 1-1/4 NPT discharge. Warning: This is 220V pump! Specifications: 4" deep well submersible pump. 1 HP, 230V, 5.1 Amps, 7 stage, 1-1/4 NPT discharge Industrial grade heavy duty, also good for home usage Fits a 5" or larger well casing. For 4" casing, use pump MA0460X-9A, or MA0459X-14A; Patented impeller provides high flow up to 33GPM, and 207 ft. Head. That is greater than almost all other 1 HP well pumps. Water temperature: (32 113of) Trans mediums Ph.: 6.5 8.5 Shell, motor shaft are made with stainless steel to ensure corrosion resistance. High quality sealed ball bearings guarantee its excellent performance. High efficient and hermetically sealed motor has a built in capacitor start, and thermal protection to prevent overheating, for longer life and powerful start. Built in control box. This pump DOES NOT require an external control box! This pump uses high quality UL approved motor, UL file No.: E233961 This is a 2 wire pump (2 wires + ground wire) 10' long electric cord included. Heavy-duty thermoplastic impellers, diffusers, and intake screen. Built in check valve included. Submersible design creates quiet operation Unique design reduces its noise. 207 feet max head is for open water tanks. Refer to the 'Pump Selection Guide' for the pressure tank applications. User's manual included and installation tape kit included. Warranty: 12 months limited manufacturer's warranty

• American company
• Pump, Deep Well Submersible Pump, 1HP, 220V 60HZ, 30 Gpm, Stainless Steel, for 4" or bigger well, long life
• 2 wire pump with built in control box- DOES NOT require external control box; Industrial grade heavy duty, good for home usage; Built in thermal protection
• Submersible Pump

User questions & answers

Question:	Well is 300 feet deep will this pump and electrical cord work
Answer:	I used this pump for less than 75 ft well. Pumps good with great pressure.
Question:	Will this pump work in a 4" ID well casing
Answer:	It should. But if you have rust or dirt built up in the casing, the casing size maybe less than 4" which may cause problems for the pump.
Question:	Does the hallmark ma0414x-7a deep well pump come with electrical cable
Answer:	The cable is about 6 feet long that comes attached to the pump. You can get the electrical splices and the wire you need to complete the installation from Home Depot.
Question:	How long is the electrical cable that comes with the pump
Answer:	The electrical cable that is integral to the pump is a few feet long and can be spliced to the electrical line going back to the power box. I believe it was ~6ft. long. In the spirit of too much information: The splice technique I used was to get a submersible splice kit (available on Amazon or Lowe's). It comes with the splices and a special heat shrink tube that has a rubberized coating that oozes out when it is shrunk over the splices. I also covered the splice with 3M type 33 black tape as an added insurance policy. This tape is putty-like and bonds to itself when wrapped. I also used the 3M tape to cover all of the barbed fitting/hose clamp plumbing joints and the cast housing of the pump. The pump has been in for several months and works like a champ. You will not be disappointed with the quality and performance of this pump.

Product features

Hallmark Industries MA0414X-7A Deep Well Submersible Pump, 1 hp, 230V, 60 HZ, 30

This is 220V (230V) pump. Does not work for 110V (115V).

Product description

Hallmark Industries MA0419X-12AEXT pump, 4 inch deep well submersible, 2 HP, 230VAC/60Hz/1pH, 35 GPM max, stainless steel, with control box

Features & Technical Specifications:

* 4" deep well submersible pump. Fits 5" or bigger well casing (will not fit 4" well casing).

* 2 HP, 230V, 10.2 Amps, 12 stage, 1-1/4” NPT discharge.

* Industrial grade heavy duty, also good for home usage.

* Patented impeller & 12 stage unique design provide a much longer pump life than other brands.

* 35 GPM max & 400ft head are greater than almost all other 2HP well pumps, and comparable to 3HP pumps, but uses less electricity.

* 400 ft is total water head.

* Water temperature: (32 ~113oF) Trans medium’s Ph: 6.5~ 8.5

* Shell, motor shaft are made with stainless steel to ensure corrosion resistance. High quality sealed ball bearings guarantee its excellent performance.

* Hermetically sealed motor has thermal protection to prevent overheating, for longer life and powerful start.

* This pump comes with a starter box (control box).

* This pump uses high quality and high efficient UL approved motor, UL file No.: E233961, and uses less energy

* This is a 3 wire pump with ground wire (total 4 wire)

* 10' long electric cord, installation tape & electric tape kits are all included in the package.

* Heavy-duty thermoplastic impellers, diffusers, and intake screen.

* Unique design reduces its noise.

* User's manual included. Free technical support available during your installation.

* This pump has a built in check valve. However installing additional check valves is required.

* Shipped with pump head and motor separately. Assembly required.

User questions & answers

Question:	What is the gpm and psi ratings on this pump set at 300' deep
Answer:	If the water level is 300', the max psi the pump can produce is 43 psi. Please note it is based on the water level, not where the pump is. At max psi the flow is 0 gpm. At 300' water level with no pressure, the flow is about 15 gpm. Thank you.
Question:	Do you have a 3/4hp, 220 volt 4" deep well pump
Answer:	Yes. The part # is MA0459X-14A by Hallmark Industries Inc. Thank you.
Question:	Can you upgrade control box? If so, what type/size did you upgrade to
Answer:	The control box contains a starting capacitor which is designed to match the pump. So you can not change the control box. Thank you.
Question:	Do you have 3" 110 volt with 1" outlet box built in
Answer:	Yes. This is the link: https://www.amazon.com/Hallmark-Industries-MA0459X-14-S-Shell-Stainless/dp/B07BPFJ9BQ

• ✔High Power Sturdy Sprinkling Pump---This 1200W, 1.6HP powerful water sprinkling pump is made of stainless steel head, aluminium body with the iron handle, which is sturdy and not easy to rust and ensures the long-term use.
• ✔ High Frequency---845 gallon per hour with 3200L/H capacity for this stainless booster pump would provide enough water and pressure for a magnitude project with lower noice and energy saving performing to 23 feet depth of water at 66 PSI. Tips: It takes some time before automatic pumping. Adding some pilotage water to the head of the pump will help accelerate the flow rate of inlet. The closer water inlet pipe and the pump is, the better the effect.
• ✔ Portable for Carry---It is portable and convenience to carry for use when you would like to put it in a shallow well or the lawn. Ideal for the supply, irrigation and water transportation. There is a dewatering outlet designed for draining the left water in the machine if it will not be in use for a long term. Water Inlet and outlet need to be sealed up when you connect pipes.
• ✔ Automatic ON/OFF Switch---Our product uses the Automatic ON/OFF Switch Technology turns pump on and off to sense the presence of water. Designed to transfer water from tanks, pools, rain barrels, ground water and so on for sprinkling, irrigating or transportating.
• ✔ Best Customer Service---Easy to assemble on your own with the manul and we would exdend our item to one year warranty after 30 days free return to protect your profit. Shipped by our US warehouse and receive it only 5-7 days after ordering. We are just starting doing small business on Amazon but we desire to provide the best service with the best product so if there is any problem about our item, please feel free to contact us at any time.

User questions & answers

Question:	How many amps does this pump draw
Answer:	It means each piece is one and four-sevenths inches long (~40 millimeters).
Question:	can I use this pump to feed my pressure washer from my 100gallon tank
Answer:	I Purchased the assorted colored heat shrink wraps they do not have A adhesive, the ones that I purchased shrink right down pretty good and hold well hope this helps you out. Note this is not for The black heat shrink wraps ,that I’m giving this review, God bless and have a good day
Question:	Will this pump push water up 50 feet to fill a hot water heating sytsem
Answer:	It has a lid with clasps.
Question:	Does anyone have Homex 's phone number ? Their E-mailbox is over quota and messages are being returned as unable to deliver
Answer:	Probably not, you just gotta throw out the whole cat. ( you can stack them 2 over if you really need it )

Product features

1.6HP Homdox Garden Pump

With a corrosion resistant stainless steel head, the iron handle and Aluminum housing construction, the Homdox 1.6 HP 845 GPH well jet pump is sturdy and not easy to rust and ensures the long-term use, offers superior performance to 23 feet depth of water at 66 PSI.

The compact and durable design allows you to carry around conveniently and ensures long time use. Featuring an emergy-efficient motor with thermal overload protection, it also makes only little noise when operating.

It’s ideal for the supply of fresh water to rural homes, farms, and cabins, and perfect for irrigation, such as watering flowers and washing car and so on.

How to use this Homdox Garden Pump?

1. Unscrew filter housing and remove filter.

2. Fill completely with water.

3. Reinstall filter and screw filter housing and seal back on.

4. If you want to shorten the intake time, fill the suction line as well (onlu possible with the check valve).

5. Open pressure line (trun on water spigot or nozzle), so that air can escape during intake.

6. Switch the device on.

7. When water runs out evenly, turn the device off.

Sprinkler Water Pump

Portable and convenience to carry for use as sprinkler water pump to irrigate your garden.

Booster Water Pump

Transfer water for your swimming pool/pond as a booster water pump, fill water or drain water quickly to save time and energy.

Industrial Water Pump

The semi-stationary form of the device is designed for conveying clean water as a fountain, rain and industrial water pump.

1.6HP Garden Pump

More powerful than those 0.5HP,1 HP, 1.5HP pumps on the market, get it for sprinkling.

Product description

Package Including:

2pc 100W Monocrystalline Solar Panel

1pc 24V DC Stainless Steel Deep Well Submersible Pump

1 pair of 16.4ft Solar Cable

2 sets Z Mounting Brackets



24V Stainless Steel Deep Well Submersible Pump

Input Power: 250W

Max Flow: 1500L/H

Max Head: 98ft (30M)

Voltage: 24V

Bearing: NSK

Height*: 13.18in (335mm)

Weight: 9.26lbs (4.2kg)

Outlet: 1 inch

Diameter: 3 inch (75mm)

The Length of Cable: 49ft (15M)

Motor: Brushless DC Pump Motor

Materials: Stainless Steel



100W Monocrystalline Solar Panel

Rated Power: 100W

Open Circuit Voltage(Voc): 21.6V

Maximum/Peak Voltage (Vmp): 18V

Short circuit current (Isc): 7.72A

Maximum/Peak Current(Imp): 6.67A

Output Tolerance: ±3%

Temperature range:-40℃to +80℃

Frame: Heavy duty aluminum

Size: 996*665*35mm(39.2"x26.2"x1.4"）

Power: 90% within 10 years 80% within 25 years

• [ High Lift, Large Flow ] - Voltage: 24V DC, Input Power: 250W, Max Flow: 1500L/H, Max Head: 98ft, improving irrigation efficiency greatly.
• [ Long Life of Service ] - Durable, high-strength stainless steel, full copper motor, thermal protection, low noise.
• [ Nongeographic Restrictions ] - Charge whenever and wherever you want, solar panels powered directly, reduce consumption and energy conservation.
• [ Easy to Use ] - The well pump can be powered by the solar panel directly, you can connect the water pump to the solar panel directly. If you have 24V battery pack, you can also set up the whole solar pump system (solar panel, cable, charge controller and solar pump).
• [ Multiple Application, Various Spray Methods ] - Convenient for irrigation, ponds, breeding, farms and a variety of home outdoor scenes.

• ★【Technical Specifications】4"，1HP, 230V, 5.1Amps , 60Hz,1-1/4” NPT discharge. 8 Impellers；Fits in a 4" casing.
• ★【Economy & Effective】33GPM max & 207ft head；33ft lengthy electric cord -allows for easy connection; built-in controlbox;built-in check vavle;built-in thermal protection
• ★【Outstanding Performance】Stainless steel body& permanent magnet motors&thermoplastic impellers -industrial grade heavy duty - guarantees high durability and long-lasting use;
• ★【Widely Application】 Perfectly convenient for use at home and for factory usage;can be implemented in different types of wells-ash pipe wells, steel pipe wells, or soil wells；Can be used for extracting water from reservoirs, canals, rivers, open water tanks and other water lifting works
• ★【 Built-in Controlbox】This item is with a built-in control box, it is for thermal protection, short-cut protection and overload protection

Product features

iMeshbean Submersible Deep Well Pump

• Outlet Diameter :1-1/4" NPT Discharge
• Diameter: 4"
• Protection Grade: IP58
• Pump Body Material: Stainless Steel - High strength and corrosion resistance
• Water Temperature: (32 ~113 ℉ )
• Water Ph: 6.5~ 8.5
• Maximum Sand Content: 0.25%

Coupling & Outlet

• Cast iron with electrophoretic paint.
• Easy to install and connect with the water pipe.

Stainless Steel Strainer

• Fixed with a filter screen to prevent solid grain of a given size from entrance of the pump

Power Cord

• 33 FT Power Cord
• 2 wire pump with 3-Wire (2 wires + ground wire)

Strong Motor:

• Copper Wire Coil
• High Efficiency
• Strong Power

High Precision Rotor:

• High Efficiency
• Stable
• Energy-saving
• Long-life

High-quality Bearing:

• Strong wear resistance.
• High-hardness
• Rustless

Applications:

• Water supply from wells or reservoirs
• Household use, for civil and industrial applications
• Garden and courtyard irrigation
• Swimming pool filling
• Fountains

Product description

Plug in and leave the pump unattended for worry-free water removal. Ideal for crawl spaces, flat roofs, window wells and other problem areas around the home where water accumulates.

Troubleshooting:

Primary causes for malfunction impacting the automatic switching function:

o A clogged vent hole (small debris, seeds, pine needles)

o A contaminated switch housing (algae, slime or other materials accumulated on the switch underside).

From the Manufacturer

Plug in and leave the pump unattended for worry-free water removal. Ideal for crawl spaces, flat roofs, window wells and other problem areas around the home where water accumulates.

• I switch technology turns pump on and off by sensing the presence of water; removes water down to 3/8 in. Of surface
• 1/4 hp; max. Flow rate is 3000 gallons per hour; 1850 gph at 10 ft. Of discharge lift
• Can be left unattended to remove water
• Submersible reinforced sealed thermoplastic construction.Voltage:120V
• The water level must be at least 1-3/4 inches for the pump to cycle, prime, and operate. Water levels less than 1-3/4 inches will not allow the impeller to contact water therefore no water will be pumped. Garden hose adapter

User questions & answers

Question:	I currently have window well pumps that "check" for water every so often. Wondering how the thermaplastic holds up in winter/cold? Any concerns
Answer:	This is our first winter for the pump. Ours sits in a bucket with washed stone under and around the bucket. Our window well is also covered for the winter . We'll find out for sure in a couple months.
Question:	Can I leave this pump outside year round? Will it freeze up? How cold can it be before I have to take it inside
Answer:	I packed up the pump and stored it indoors for the winter. The freezing and thawing will not be good for the unit.
Question:	Is this pump corrosion resistant
Answer:	Yes
Question:	is check valve required
Answer:	A check valve is not required, but would be a good idea to have one on the pump.

Product description

CUSTOM CUT LENGTH OF 10-3 / 12-3 / 14-3 + GROUND TWISTED SUBMERSIBLE PUMP CABLE Comes in 10' increments, you pick quantity. If you actually want 2, 50' increments, NOT continuous, please specify with your order. Cut from my master roll. Rated for 600 volts THW type wire PVC Coating Solid copper conductor. Includes 1 yellow, 1 red, 1 Black and 1 Green wire, (just like picture shows) all twisted together IF YOU NEED A DIFFERENT LENGTH WIRE(LIKE 38'), JUST ASK AND I'LL GET YOU A QUOTE

• Custom-Cut in 10' increments - YOU PICK QUANTITY
• Rated for 600 volts
• THW type wire
• PVC Coating
• STRANDED copper conductor

User questions & answers

Question:	What is the outside diameter of the whole bundle / total wires
Answer:	I don’t know the answer to your question but I would not recommend buying. I had one that broke shortly after I got it. Amazon got it taken care of but the seller wanted me to send it back to China at my expense. Terrible customer service
Question:	Hi Quote for 60 ft of the 14/3 w/Ground please! :) Thank you
Answer:	Yes I do and run sprinklers around house.
Question:	Howdy, can you please give me a quote for 110' of 12-3 wire for a 1hp Red Lion 3-wire pump
Answer:	Yes, This pump have a maximum Lift capacity od 137ft.
Question:	can I order just 10 or 20 feet of wire
Answer:	No

Product description

Homdox 1.6 HP stainless steel garden booster pump is designed for the supply of fresh water to rural homes, farms, and cabins, etc. The pump offers superior performance to 23 feet depth of water at 66 PSI and features an energy-efficient motor with thermal overload protection.



Specification:

Material: Metal and Plastic

Size: 33 x 20 x 23cm/ 12.9 x 7.8 x 9 inch (L x W x H)

Rope Length: 110cm/42.9inch

Voltage/Frequency: 115V/60Hz

Power: 1200W/1.6HP

Capacity: 3200L/H

Max. height: 42m/137ft

Max suction level: 7m/23ft

Max pressure: 66PSI

Max Flow Rate: 845GPH



Package content:

1 x Water Pump

1 x User Manual



Tips:

1.The max suction height is 7/23ft and it takes some time before automatic pumping.

2.Adding some pilotage water to the head of the pump will help accelerate the flow rate of inlet. The closer water inlet pipe and the pump is the better the effect.

3.Impurities are not allowed in the water and there is a jam if the diameter is more than 1mm.

4.There is a dewatering outlet designed for draining the left water in the machine if it will not be in use for a long term. Water Inlet and outlet need to be sealed up when you connect pipes.

• Power: 1200W/1.6HP; Capacity: 3200L/H; Max Suction Height: 23 feet; Max Height: 137 Feet.
• 845 Gallon Per Hour rating tackles any draining job at a fraction of the time. 66 PSI water pressure makes this pump perfect for irrigation, water transport or pump water. Ideal for sprinkling systems, flow irrigation systems, gardening, rain barrels, large aquariums and ground water.
• This Electric Centrifugal Clear Water Pump with 66 PSI water pressure is capable of pumping water 42 meters high with an impressive flow rate of 3200L per hour and have a maximum suction depth of 7m. It also works with a water temperature up to 35°.
• The water pump is compatible with a tank and can work as a sprinkler pump, a well pump with a pressure regulator or a booster pump, which can be widely applied in garden, lawn and farm.
• Portable Self-aspirating Jet Garden Pump features with stainless Aluminum pump housing, maintenance-free capacitor motor, hydraulic unit consisting of Nonyl, safe&waterproof on/off switch and easy carry handle for portability. Both size of inlet and outlet are 1 Inch while one check valve and two connectors are included.

User questions & answers

Question:	What is your return policy if the item is not working on arrival or is broken within the first 90 days
Answer:	First you need to conatin the water digging into the hillside and sinking sand point isnt my option use a coffer dam and poly hose to redirect the flo since you no doubt don't know for sure the location of the water source digging into a hillside thats weeping could be catasrophic
Question:	Do i need to prime the pump
Answer:	Yes, this is schedule 40 pipe for heavy use.
Question:	Can you drain a water heater with this
Answer:	OUr OOKU 12/24 Pcs Washable Crayons Watercolor Set are out of stock now, which will be in stock until January. ---OOKU Team Support
Question:	What is the warranty period for this pump
Answer:	No, These Crayons Watercolor Set are not refillable. They are single-use. ---OOKU Support

Product description

Tips



The max suction height is 7/23ft and it takes some time before automatic pumping.

Adding some pilotage water to the head of the pump will help accelerate the flow rate of inlet. The closer water inlet pipe and the pump is, the better the effect.

Impurities are not allowed in the water and it may cause a jam if the diameter is more than 1mm.

There is a dewatering outlet designed for draining the left water in the machine if it will not be in use for a long term.

Water Inlet and outlet need to be sealed up when you connect pipes.



Specification

Material:Stainless aluminum, Plastic

Weight: 7.28KG

Power: 1200W/1.6HP

Voltage/Frequency:115V/60Hz, 

Max pressure:66PSI

Capacity: 3200L/H, Max Flow Rate: 845GPH

Max.height:42m/137ft, Max suction level:7m/23ft

Rope Length: 110cm/42.9inch

1" inlet and outlet

Max Liquid Temperature: 55 C or 130F

Size: 12.9 x 7.8 x 9 inch(L x W x H))

Package Included:

1 x Water Pump

1 x User Manual

• 【POWERFUL BOOSTER PUMP】This lawn sprinkling pump power has power 1200W/1.6HP, 3200L/H capacity, max suction height reaches to 23 feet; while 137 foot head lift provides enough water and pressure for different jobs.
• 【HIGH EFFICIENCY】This Electric Shallow Well Pump with 66 PSI water pressure is capable of pumping water 42 meters high with an impressive flow rate of 3200L per hour.
• 【HIGH-PERFORMANCE】Water transfer pump features with maintenance-free capacitor motor, hydraulic unit consisting of Nonyl, waterproof on/off switch and easy carry handle for portability.
• 【DURABLE CONSTRUCTION】The lawn sprinkling pump is made of stainless aluminum housing, sturdy and durable, which is not easy to rust and extends the service life.
• 【WIDELY-USE】Lawn irrigation booster pump with 66 PSI water pressure, perfect for irrigation, water transport or pump water. This kind of lawn pump is Ideal for ponds, pools, sprinkling systems, flow irrigation systems, gardening, rain barrels, large aquariums, shallow and deep water wells.

User questions & answers

Question:	Do I need to fill the pump with water
Answer:	Good evening,YOu'd be in the 60$ rangeThanks!
Question:	Is it a antirust pump
Answer:	Good evening. Price including shipping would be 110$ Thanks! In stock and can ship as soon as you would like!
Question:	Can i put it in the rain
Answer:	yes

Product description

This is a genuine replacement part. The model number and name for the following item is: Schneider Electric 9013FSG2J24 Pressure Switch

• This is a Genuine OEM replacement part.
• Brand name: Schneider Electric
• Model number: 9013FSG2J24
• Country of Origin: United States

User questions & answers

Question:	What is the size water connection
Answer:	1/4" NPT
Question:	Does unit shut off when pressure hit 60 psi
Answer:	Yes. Then drops to 40psi and runs again. There are two adjustments. The main adjustment lowers or raises the pressure. There will still be a 20psi differential from on to off. You can adjust pressure from 60psi to 50psi (50psi / 30psi) by turning adjustment up (loosy goosy) or 40/20 etc. Factory is set to 60/40. BTW, MAKE SURE you turn the breaker and all electricity OFF before installing unit.
Question:	Does anyone know if they make some sort of arc suppression device, so the contacts won't arc and pit
Answer:	Not that I'm aware of. Instead upgrade the contacts to a higher current rating model. 9013FYG is rated 2.2kw @220v 1phase power. The FYG is rated at 3hp. the FSG is rated at 1.5hp
Question:	Are any of your water pump switches 'ant proof'. we have caribbean crazy ants and they love your switches. they short it out with their bodies
Answer:	I put vasolene on the conduit or wire going into the switch and it keeps them out.

Product description

Adjustable head rated at 100 psi. Rated at 0.8 to 17 gpd. Voltage/Hertz is 110/120 Volt. 1/4" suction and discharge tubing size. Santoprene tube material. Ideal Chlorine Injection Pump. Kit includes: Three 1/4" connecting nut. Three ferrules. One injection check valve 100 psi. One 1/4" weighted suction line strainer. One 1/4" x 20' black roll sunction/discharge tubing. One additional pump tube. QTY 1 - Mounting Bracket.

User questions & answers

Question:	Do you have 220v available
Answer:	Good afternoon., I was able to find a little information: The injection fitting is designed to fit 1/4" or 1/2" Female NPT (FNPT) connection. The 3/8" suction and discharge tubing Best regards, Scott
Question:	Do you need a pump control module with this
Answer:	To vague a question. I do not understand the what the question is. Sorry
Question:	Hi. i also need a 220v. while my model number 85mphp17 matches this item, the item number does not. my broken item # is 85mjh2b1staa. problem
Answer:	Hello, yes it is 100% OEM Best regards, Scott
Question:	I need 220volts please let me know if you have and what model
Answer:	Hello, yes, but you would need an additional reducer busing to go from the 3/4" fitting on this part to your 1/2" connection port. Best regards, Scott

Product description

9013FSG2 30/50

• Pressure switch with 30-50 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached
• Switch works with a 1. 5 hp or less pump, has an adjustable differential range of 15-30 psi, and has a cut-out range of 20-65 psi
• NEMA 1 enclosure has a 1/4" NPSF internal fluid connection

User questions & answers

Question:	Drawdown in my pressure tank makes the pump work for shorter time than recommended, can this be adjusted to 20-50 psi to prevent this from happening
Answer:	I bought 30/50 and adjusted it to 40/60 no problem. Lots of YouTube videos show you exactly how to do this. Very very easy.
Question:	Can I adjust the settings for it to turn on and off at 25 and 45 psi
Answer:	Yes, 25 - 45 psi is within parameters for this switch. See link for instructions below http://www.schneider-electric.us/en/faqs/FA89506
Question:	Will this switch shut the pump down if the pressure gets extremely low (like with a broken pipe)? Not looking for that feature
Answer:	It is a pressure switch that turns off when pressure is reached and turns on when the pressure drops. the pump will run on with low pressure
Question:	does it come pre-set at
Answer:	It sure does. Cut-in 30psi and Cut-out 50psi.

Product features

Square D brand Pumptrol 9013 pressure switch

Pumptrol 9013 pressure switches now feature Chromate 3 plating. This RoHS-compliant (Restriction of Hazardous Substances) plating reduces the potential for corrosion and rust. It covers all metal parts, protecting the switch’s key mechanical components and can be identified by its silver color.

We’ve included a sturdy black plastic hole plug in every box, so it’s easy to keep bugs, debris and other contaminants out of your switch.

Easy installation, grounding

Grounding is secure. We’ve added indents just above the two green ground screws to better hold the wiring. Better retention of ground wire strands means greater reliability, and faster wiring.

To help you assure proper installation, we’ve included clear, simple-to-follow instructions in every box. A switch cover label also provides setting instructions exactly when you need them.