10 best amprobe tests

Product description

Amprobe products range from an extensive line of clamp meters and digital multimeters to industry-specific tools for residential/commercial electricians, HVAC/R technicians, utilities and industrial maintenance professionals. All Amprobe tools undergo rigorous testing to ensure full compliance with the latest IEC and CE safety regulations in Fluke Safety labs for quality and safety you can trust.

• Test lead set connects a compatible electrical test meter to a device for testing
• Set includes two lead wires, two threaded test probe tips, and two alligator clips
• Polyvinyl chloride (PVC) insulation
• Threaded alligator clips have 0.60" jaw opening and teeth that grip the conductor to provide a more secure, hands-free connection than probe tips
• Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category III installations up to 1,000V

User questions & answers

Question:	Hi I was wondering if you might be able to measure the connector ID and OD for me, the end that goes in the meter. I'd like to see if these would fit in my Craftsman meter. Thank you
Answer:	Yes. It barely fits, but my husband gets his 17" 2009 MacBook Pro in there. It's meant for 15" laptops which is why it's tight for a 17".
Question:	do they fit my extech ma
Answer:	yes. the sleeve is attached towards the back and padded. also it's slightly raised from the bottom of the bag so that you don't slam your laptop on the group when the bag is on the ground
Question:	will the clips puncture through the insulation on a wire
Answer:	It will not be leather, I purchased the olive green one and it's like a canvas material only more authentic. And the straps are rubber no leather at all on this bag
Question:	will these leads fit a amprobe-12 meter
Answer:	Think the key is the rubber straps. They're pretty hip.

Product features

Amprobe TL35B Test Leads with Alligator Clips

The Amprobe TL35B test lead set contains two polyvinyl chloride (PVC) insulation lead wires with two threaded probe tips and two threaded alligator clips for connecting a compatible electrical test meter to a device in electrical testing applications. The lead wires are 40-inches and have standard probe tips that are held against the conductor during testing. The alligator clips (also called crocodile clips) screw onto the probe tips and have teeth that grip the conductor to provide a more secure, hands-free connection than the test probe tips. The clips have two jaws with a 0.60-inch jaw opening. The probe tips and the included alligator clips are threaded, allowing for a more secure connection than non-threaded tips and clips. The lead wires can be used with testing devices that have universal 4-millimeter jacks.

Compatible with Many Amprobe Products

Compatible with all Amprobe Clamp Meters and Multimeters that have a standard input terminal.

Including: AM-500 Digital Multimeter, AM-510 Residential Multimeter, AM-520 HVAC Multimeter, AM-530 Electrical Multimeter, AM-560 Advanced HVAC Multimeter, and AM-570 Industrial Multimeter. AMP-210 Electrical Clamp Meter, AMP-220 Electrical Clamp Meter, AMP-310 AC HVAC Motor Clamp Meter, AMP-320 AC/DCHVAC Clamp Meter, AMP-330 Industrial Motor Clamp Meter and many other electrical test tools by Amprobe.

Meets Safety Standard

The Amprobe TL35B Test Leads with Alligator Clips meet International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category III installations up to 1,000V.

Threaded Alligator Clips

Included alligator clips with threaded 0.60 inch jaw opening and teeth that grip the conductor to provide a more secure, hands-free connection than probe tips.

What’s in the Box?

test leads with threaded probe tips.

threaded alligator clips.

Amprobe builds rugged, reliable test and measurement tools

Our products have been trusted by professional electricians and HVAC technicians for over 65 years and range from an extensive line of clamp meters and digital multimeters to industry-specific tools for residential/commercial electricians, HVAC/R technicians, utilities and industrial maintenance professionals. Rugged built electrical test tools with verified quality and safety, Amprobe offers practical, reliable tools at a fair price. Over the last six decades Amprobe has become a leading manufacturer of safe, reliable electrical test tools for industrial, commercial and residential applications with over 500 products worldwide. Amprobe not only invented the first clamp meter and the first wire tracer, but has also been consistently first to market with innovative solutions to better meet the needs of our professional customers. All Amprobe tools undergo rigorous testing to ensure quality and full compliance with the latest IEC and CE safety regulations in our state of the art environmental and safety testing labs and are further listed with third party certification labs.

Our commitment to high-quality products and customer service is demonstrated by our industry exclusive 'No Hassle' warranty. In the unlikely event that an Amprobe Test Tool requires warranty service, any of our local dealers are authorized to replace it, on the spot ( MSLP).

Product description

• Test lead set connects a compatible electrical test meter to a device for testing
• Set includes two 48” lead wires, two standard probe tips, two alligator clips, and two spade lugs
• Silicone insulation on lead wires protects hands from shock and heat, resists melting or becoming brittle in hot or cold environments, and maintains flexibility better than PVC insulation
• 3.15" alligator clips have 0.30" jaw opening and teeth that grip the conductor to provide a more secure, hands-free connection than probe tips
• Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category IV installations up to 1,000V

User questions & answers

Question:	Do these include spade lugs? Description says yes, but picture does not show them
Answer:	Hi. I think that only the LEROUX company can answer this very technical question !! But it's an interesting question that I never thought about asking even though I have been using this product since years....
Question:	What is the connection between alligator clips/spade lugs and the test leads? Threaded
Answer:	It is made in and imported from France.
Question:	What model test leads do i need for an amprobe acd
Answer:	All chicory has prebiotic properties....google is your friend....(well technically they are not, since they are data mongers), but some research outside of amazon could help ;-)

Product description

Amprobe products range from an extensive line of clamp meters and digital multimeters to industry-specific tools for residential/commercial electricians, HVAC/R technicians, utilities and industrial maintenance professionals. All Amprobe tools undergo rigorous testing to ensure full compliance with the latest IEC and CE safety regulations in Fluke Safety labs for quality and safety you can trust.

• Test lead set connects a compatible electrical test meter to a device for testing
• Set includes two lead wires, two threaded test probe tips, and two alligator clips
• 2.67" threaded alligator clips have 0.30" jaw opening and teeth that grip the conductor to provide a more secure, hands-free connection than probe tips
• Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category III installations up to 1,000V

User questions & answers

Question:	Will these fit the Amprobe RS
Answer:	I assume the initial price was a hook and once a stream of customers reached a desired level, the price was raised to reduce demand/workload while maintaining profit levels.
Question:	which test leads fit my GDT
Answer:	You have to experiment to suit your taste. Try about a 1/3rd of the amount you would use for coffee and adjust from there. The Chicory is more robust.
Question:	Will these work with a Fluke 115 multimeter
Answer:	This question is interesting in that in order to be labeled "organic" by USDA rules a product can not be gmo modified, or be from gmo seeds or even have been fed and gmo plant foods. Here from their website is Community Coffee's statement regarding gmo, organic and fail trade coffees. " DOES COMMUNITY COFFEE OFFER ORGANIC OR FAIR-TRADE COFFEES? We have been dedicated to sustainability from farm-to-cup for many years and have joined the Sustainable Coffee Challenge. As part of this challenge we promise to be 100% responsibly sourced by 2021. At Community Coffee, we are not Fair Trade certified but we are committed to fair labor practices. As a founding member of World Coffee Research we support the mission to grow, protect, and enhance supplies of quality coffee while improving the livelihoods of the families who produce that coffee in communities throughout the world."
Question:	Is the wire also qualified for 1000 Volts? What is the wire spec
Answer:	It is same things. Different words choices in the title.

Product features

Amprobe TL36A Test Leads with Alligator Clips, 1000V

The Amprobe TL36A test lead set contains two PVC lead wires with two threaded probe tips and two threaded alligator clips for connecting a compatible electrical test meter to a device in electrical testing applications. The 48" lead wires have silicone insulation to protect hands from shock and heat. The silicone insulation resists melting in hot environments and becoming brittle in cold ones, and it maintains flexibility better than polyvinyl chloride (PVC) insulation. The lead wires have standard probe tips that are held against the conductor during testing. The alligator clips (also called crocodile clips) screw onto the probe tips and have teeth that grip the conductor to provide a more secure, hands-free connection than the test probe tips. The clips are 2.67" long and have a 0.30" jaw opening. The probe tips and the included alligator clips are threaded, allowing for a more secure connection than non-threaded tips and clips. The lead wires can be used with testing devices that have universal 4 mm jacks. The kit meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category III installations up to 1,000V, which covers items used with enclosed building circuit installations (service panel parts, branch circuits, and fixed installations that are connected directly to a building's AC power supply). It also conforms to applicable European Conformity (CE) directives.

Compatible with Amprobe Electrical Testers

The Amprobe TL36A Test Leads with Alligator Clips, 1000V set connects a compatible electrical test meter to a device for testing.

Meets Safety Standard

The Amprobe TL36A Test Leads with Alligator Clips, 1000V meets the International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category III installations up to 1,000V.

Threaded Alligator Clips

Included 2.67" threaded alligator clips have 0.30" jaw opening and teeth that grip the conductor to provide a more secure, hands-free connection than probe tips.

What’s in the Box?

test leads with threaded probe tips.

threaded alligator clips.

Amprobe builds rugged, reliable test and measurement tools

Our products have been trusted by professional electricians and HVAC technicians for over 65 years and range from an extensive line of clamp meters and digital multimeters to industry-specific tools for residential/commercial electricians, HVAC/R technicians, utilities and industrial maintenance professionals. Rugged built electrical test tools with verified quality and safety, Amprobe offers practical, reliable tools at a fair price. Over the last six decades Amprobe has become a leading manufacturer of safe, reliable electrical test tools for industrial, commercial and residential applications with over 500 products worldwide. Amprobe not only invented the first clamp meter and the first wire tracer, but has also been consistently first to market with innovative solutions to better meet the needs of our professional customers. All Amprobe tools undergo rigorous testing to ensure quality and full compliance with the latest IEC and CE safety regulations in our state of the art environmental and safety testing labs and are further listed with third party certification labs.

Our commitment to high-quality products and customer service is demonstrated by our industry exclusive 'No Hassle' warranty. In the unlikely event that an Amprobe Test Tool requires warranty service, any of our local dealers are authorized to replace it, on the spot.

Product description

• Integrated tilt stand for easy bench use
• Diode test for component level troubleshooting
• Data Hold freezes display to "hold" measurement reading
• 750 V AC / 1000 V DC—highest voltage rating in this size of meter
• Special 2000M Ohm measurement range

User questions & answers

Question:

its years old but i rarely used it. seems mine no longer is showing polarity,ac/dc or sleep or battery is the lcd bad

Answer:

Chicory is a root not a bean, it comes as a ground or root pieces. I use the ground chicory, it goes further. I use chicory as a coffee additive as it cuts the acid in the coffee. I put 5 or 6 tablespoons of the ground root into a french press and fill it with cold water. Then add it to already made coffee. For those who like chicory coffee (it was drunk exclusively in the South following the Civil War, as real coffee beans were not accessible) - simply pour the soaked chicory from your french press and heat it up. To actually brew it I would suggest talking to an expert. I have drunk it in New Orleans, but you chew as well as drink. I would prefer filtered.

Product description

Amprobe products range from an extensive line of clamp meters and digital multimeters to industry-specific tools for residential/commercial electricians, HVAC/R technicians, utilities and industrial maintenance professionals. All Amprobe tools undergo rigorous testing to ensure full compliance with the latest IEC and CE safety regulations in Fluke Safety labs for quality and safety you can trust.

From the Manufacturer

Amprobe began life in Long Island, NY in the late 1940's under the name Pyramid Instrument Company. In 1960 the company name was formally changed to Amprobe Instrument Corporation. Amprobe continued to design, engineer, manufacture and distribute product from its Lynbrook, NY location until it was merged to form ATP and relocated to South Florida in late 1999. The Amprobe 37XR-A True RMS Digital Multimeter has a frequency to 40 H, a capacitance to 400 uF and a logic to 20 MHz. It has min/max, average, relative, peak and data hold. Also, it has a hand auto power off system to help save on bettery life.

• Inductance To 40 H, Frequency To 40 MHz, Capacitance To 400 microF, Logic To 20 MHz
• Input Warning Tone When Test Leads Are In Wrong Jack
• 10,000 Count, 0.1% Accuracy
• 1000V/750V DC/AC True RMS
• 10 Amps AC/DC, Fully Safety Fused -- Resistance To 40Mohm

User questions & answers

Question:	On the amprobe 37xr-a, they mention the magnetic strap holster. what is that. looked at the manual, and all i see is a clip that comes out, no holste
Answer:	the inner copper plug is about 4mm and the outer plastic lead cover is about 7mm, These are great leads and the alligator attachment screws over the pointed leads. I use them a lot and for the price they are a great deal. I use a Mastech MS8268 meter that I really like as well. After looking at the Craftsman meters online they look like they should fit, provided that the copper plug has the outer plastic cover over the copper plugs. I hope that helps you. They are pretty universal with higher end multimeters. They also look just like the Craftsman meter lead sold by Amazon.
Question:	I am testing a solar array that has more than 10 A DC. Can this DMM measure more than 10 A ? If not what kind of Tester has more than 10 A
Answer:	yes
Question:	Could you tell me which is the total weight including packaging ? Tks
Answer:	No they will not under designed use. I suppose they could be "helped" to puncture insulation with some external additional pressure, but that is not their designed function.
Question:	On the 37xr-a, how easily can the continuity beep be heard? e.g. Heard over background noise? And does it beep at all measures of continuity
Answer:	Ǹot sure, but works on craftsman and masteredbrand ( Chinese) look like standard banana jacks plugs.

Product features

The XR Multimeter Series

The XR Multimeter Series lets you customize features and funtions for your electric, electrical, plant maintenance or HVAC applications.

HVAC contractors and field service technicians have a choice of the manual ranging 37XR-A with capacitance of the autoranging, True-RMS 38XR-A offers component and logic test. If you're an engineer, designing or troubleshooting industrial automation and control systems, check out the 38XR-A,a True-RMS multimeter with bright blue backlight and an optical PC interface.

Voltect Non-Contact Technology

The 37XR-A Multimeter features auto and manual ranging for measuring current, voltage, resistance, capacitance, frequency, inductance, duty cycles, logic states, and dBm function.

Easy-to-Read Measurements

The Amprobe 37XR-A Digital Multimeter is a feature packed, rugged and reliable multimeter. It displays true-rms measurement on a low-light backlit LCD screen.

True-RMS Measurement

The Amprobe 37XR-A Digital Multimeter offers true-rms measurement along with component and logic testing for troubleshooting electronics at the bench or on the job site.

What's in the box?

- Amprobe 37XR-A TRMS digital multimeter.

- Test leads with threaded alligator clips (TL36A).

- 9 V battery (installed).

- Magne-Grip Holster with magnetic hanging strap.

- Spare fuse.

- User manual.

Amprobe builds rugged, reliable test and measurement tools

Our products have been trusted by professional electricians and HVAC technicians for over 65 years and range from an extensive line of clamp meters and digital multimeters to industry-specific tools for residential/commercial electricians, HVAC/R technicians, utilities and industrial maintenance professionals. Rugged built electrical test tools with verified quality and safety, Amprobe offers practical, reliable tools at a fair price. Over the last six decades Amprobe has become a leading manufacturer of safe, reliable electrical test tools for industrial, commercial and residential applications with over 500 products worldwide. Amprobe not only invented the first clamp meter and the first wire tracer, but has also been consistently first to market with innovative solutions to better meet the needs of our professional customers. All Amprobe tools undergo rigorous testing to ensure quality and full compliance with the latest IEC and CE safety regulations in our state of the art environmental and safety testing labs and are further listed with third party certification labs.

Our commitment to high-quality products and customer service is demonstrated by our industry exclusive 'No Hassle' warranty. In the unlikely event that an Amprobe Test Tool requires warranty service, any of our local dealers are authorized to replace it, on the spot.

Product description

The LT-10 Lamp Tester is a 3-in-1 solution to test fluorescent light bulbs, pins and voltage. With an industry leading 48" removable and retractable antenna, VolTect™ non-contact voltage detection and its ultra-compact design, the Amprobe LT-10 Lamp Tester is the right tool for electrical and facilities maintenance applications. Includes: 48” antenna, user’s manual, battery and carrying case.

• Lamp and pin test functions to troubleshoot fluorescent bulbs prior to installation or removal
• Built-in VolTect non-contact voltage detection
• Industry leading 48” removable and retractable antenna to test bulbs and voltage without use of a ladder
• Insulated antenna sleeve and tip provided to safely extend and retract during use
• Easy, single button operation with ultra-compact design for portability
• Compatible with T2, T4, T5, T8, T9, T10, T12 and fluorescent energy saving light bulbs
• Includes: 48” antenna, user’s manual, battery (installed) and carrying case

User questions & answers

Question:	Does the pin tester work with the Bullet style pins
Answer:	The TL36A is rated for 1000V use.
Question:	Does it work with neon
Answer:	yes they are included
Question:	Does it work with T12s? In comments it says no
Answer:	The connection is threaded.
Question:	where do I find the code
Answer:	Should be able to use tl35b,tl36a, or mtl-90b or any similar to them

Product features

Test Fluorescent Lights With Ease

Troubleshooting fluorescent lights is as easy as 1-2-3, saving you valuable time and money. The Amprobe Fluorescent light Tester is a problem solving tool designed to easily test whether fluorescent light bulb and ballasts are working prior to installation or removal. The intuitive signal button operation allows you to troubleshoot lamps and avoid wasteful disposal of fluorescent light bulbs and ballasts.

Extended Reach Non-Contact Voltage Detection

The industry leading 48” antenna extends the non-contact voltage detection range, making it easy to test for voltage in difficult to reach areas such as ceilings, under desks and behind obstacles. No more bending down, crouching or carrying a heavy ladder to test for presence of voltage.

Step 1

Check bulb for presence of gas

Step 2

Check pins for voltage continuity

Step 3

Check voltage presence with non-contact voltage detection

If all three steps pass, replace ballast.

What’s In the Box?

LT-10 Fluorescent Lamp Tester – 48-inch antenna - Adaptor plate - User manual - Battery - Carrying case

Product description

• PVC test lead set connects a compatible electrical test meter to a device for testing
• Set includes two 48" lead wires, two standard probe tips, and two alligator clips
• 3.26" alligator clips have 1.30" jaw opening and teeth that grip the conductor to provide a more secure, hands-free connection than probe tips
• Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category III installations up to 1,000V (alligator clips are certified for category III installations up to 600V)

Product description

Amprobe products range from an extensive line of clamp meters and digital multimeters to industry-specific tools for residential/commercial electricians, HVAC/R technicians, utilities and industrial maintenance professionals. All Amprobe tools undergo rigorous testing to ensure full compliance with the latest IEC and CE safety regulations in Fluke Safety labs for quality and safety you can trust.

• Residential electrical test kit includes AM-420 Digital Multimeter, VP-1000 Non-Contact Voltage Probe, ST-102B Socket Tester with GFCI and all required batteries
• Kit contains tools to measure voltage up to 250V AC/DC, DC current and resistance, and battery tests
• Check for presence of voltage in receptacles, switches, extension cords and light fixtures
• Verify proper wiring of GFCI (ground fault circuit interrupter) and standard US and Canadian wall outlets with a simple push of a button
• CSA listed for safety

User questions & answers

Question:	When i touch my shoreline power cord I was getting a shock. The ground wire in the elec box was loose. Will this item confirm i fixed the problem
Answer:	If you battery indicator is present then the battery should be replaced. Missing indicators might not be an LCD issue, but could be a different hardware problem.
Question:	Can it work on appliances
Answer:	These will not fit the RS-3. Those leads were discontinued over 16 years ago.
Question:	What are the accuracy specifications of this
Answer:	Yes, these are standard probes for newer meters.
Question:	Is it nomal that "vp-1000 non-contact voltage probe"still FLASHING" when i put it howering on a "scotch tape" which conpletely not a live wire at all
Answer:	They should fit all modern multimeters with a protected banana plug. They fit my Fluke 12 (earlier generation of 115 series meters).

Product features

Amprobe PK-110 Electrical Test Kit

The Amprobe PK-110 Electrical Test Kit offers three electrical testers with testing functions suitable for a variety of residential applications: the AM-420 Digital Multimeter, ST-102B Socket Tester with GFCI and VP-1000 Non-Contact Voltage Detector. From identifying voltage presence in outlets and switches to confirming proper wiring of regular and GFCI protected outlets, the PK-110 kit boasts all the features needed to perform quick and safe electrical tests.

AM-420 Digital Multimeter

Accurately measure voltage up to 250 V in receptacles, switches, extension cords and light fixtures.

Troubleshoot light bulbs and fuses with the continuity function.

Check 1.5 V and 9 V batteries.

Test extension cords and verify proper wiring of an outlet with voltage function.

CAT II 250 V safety rating.

VP-1000 Non-Contact Voltage Detector

Easily and safely detect voltage presence between 90 and 1000 V.

Quickly verify voltage presence in outlets, switches, extension cords, circuit breakers and fuses without disconnecting the electrical system.

Bright LED alerts when voltage is present.

Operates as ‘always on’ using low power circuitry with no buttons for increased safety.

Double insulated, CAT IV 1000V safety rating.

ST-102B Socket Tester with GFCI

Test receptacle wiring and confirm GFCI sockets are properly wired with push button.

Detect five different wiring faults open ground, open neutral, open hot, hot/ground reverse, and hot/neutral reverse.

Three illuminated lights on the tester indicate the type of wiring problem.

The Complete PK-110 Electrical Test Kit

Three Electrical Testers to Perform Quick and Safe Voltage Tests

Amprobe builds rugged, reliable test and measurement tools

With over 500 products worldwide, Amprobe is a trusted manufacturer of electrical test tools for industrial, commercial and residential applications. Our products range from an extensive line of clamp meters and digital multimeters to industry-specific tools for residential/commercial electricians, HVAC/R technicians, utilities and industrial maintenance professionals. All Amprobe tools are designed and supported by Fluke engineers.

Product description

• Test lead kit connects a compatible electrical test meter to a device for testing
• Kit includes two 48” lead wires, two standard probe tips, two alligator clips, two spring-loaded clips, two spade lugs, and one red tip-length extender for connecting to a variety of conductors
• Silicone insulation on lead wires protects hands from shock and heat, resists melting or becoming brittle in hot or cold environments, and maintains flexibility better than PVC insulation
• 2.25" alligator clips have 0.30" jaw opening and teeth that grip the conductor to provide a more secure, hands-free connection than probe tips
• Meets International Electro technical Commission (IEC) safety standard 61010 and is certified for category III installations up to 1,000V (alligator clips are certified for category II installations up to 300V)

Product description

This Test Lead are used for MO-100 Milliohm Meter

• Test lead set (RED,BLACK,GREEN,BLUE) for MO-100