12 best fluke voltage testers

Product description

Simply touch the tip to a terminal strip, outlet or cord. When the tip glows red, and the unit beeps, you know there's voltage in the line. Electricians, maintenance, service, safety personnel can quickly test for energized circuits and defective grounds on the factory floor, in the shop. Continually tests its battery and its circuit integrity with a periodic double flash visual indication using fluke voltbeat technology. It comes with a two year warranty. It detects line voltage from 90vac - 600vac (1AC-AI-II).

From the Manufacturer

The next generation-voltAlertAC non-contact-voltage testers from Fluke are easy to use - just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know-voltage is present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.

• Voltbeat technology and continuous self-test - so you always know it is working
• Upon detection, tip glows and beeper sounds
• CAT IV 1000 V for added protection
• Range 90-volt to 1000-volt
• 20-volt to 90-volt AC control circuit model also available

User questions & answers

Question:	Can this determine if a lightbulb socket has power
Answer:	It will always glow when the "hot" side is present. However, if you are missing the neutral to your lightbulb socket your lightbulb will not work, but the instrument will still glow, showing power is present.
Question:	What does this one do better than a non-contact tester at 1/3 of the price
Answer:	It has better build quality, and it's not made in China (to me that means it's less likely to contribute to my death or injury).
Question:	is this better than the klien
Answer:	I find the Fluke's build quality to be better than the Klein. If I drop the Klein, the tail cap falls off and the batteries fly out. I don't have that issue with the Fluke. Also the power button works better, my Klein's button is too sensitive. Also the Fluke I have (the 1AC model) will detect voltage in most tamper resistant receptacles without having to open the shutter, where my Klein will not (some user reported the Fluke is not sensitive but relatively my experience is the opposite). Finally, the Klein and the Southwire are made in China (although the Southwire at least has a LED flashlight built in). The Fluke is not made in China so it is easily worth twice the price to me. You can check out the Fluke and Southwire models at Lowes (and purchase there if you like one or the other). The Klein is often on sale at HD but I really recommend against it compared to the other two.
Question:	What is the difference between fluke 2ac and fluke 1ac-a1-ii
Answer:	The 2ac is the newer model with an "always on" function. It has a button that is used only to ensure that it still has battery power. The 1ac is the older one that can be turned on or off. They both test for voltage presence the same way, but the 1ac has an audible alert function which the 2ac does not have.

Product features

Fluke 1AC II A1 VoltAlert Electrical Tester

Easy to carry in your shirt pocket and with continuous self-test so you always know it’s working, the Fluke 1AC-II non-contact voltage detector allows you to quickly test for energized circuits in the workplace or at home. The VoltAlert AC non-contact voltage testers from Fluke are easy to use – just touch the tip to a terminal strip, outlet, or supply cord. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.

The tip glows red and a beeper sounds when voltage is detected

• A loud, easy to hear beeper will sound and the tip will glow red when voltage is detected
• Optionally, the beeper can be disabled for use in quiet environments

Continuous self-test so you always know it’s working

• When the tip blinks red you know it’s working properly
• Provides a continual visual indication that the 1AC II is on

90 V to 1000 V AC or 200 V to 1000 V AC voltage detection range for wide application use

• Wide voltage detection range allows for use in a broad range of applications
• Also available in a low voltage model from 20 V to 90 V AC for controls circuits

Safety features

• Rated to CAT IV 1000 V for added protection
• CE and CSA approved

Product description

600V Electrical Testers let you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw current lets you check current up to 100A without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable Slim Reach test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt. Rugged enough to withstand a 10 foot (3m) drop. The T5 meets safety category: UL, CSA, CE, and VDE. 600V AC/DC Voltage. 100A AC Current. Continuity: less than 25 ohms. 1000 ohms Resistance. 45 to 66 Hz Calibration Frequency. 0.5" Jaw Capacity. 1000 counts. Auto ranging, audible continuity, data hold and auto power off features. LCD displays. AC current accuracy: +/ 1.5 percent + 2 Digits. 14 to 122 Degrees F Operating Temperature. AA Batteries. Safety Rating: CAT III 600V. Batteries and instructions included.

From the Manufacturer

The Fluke T5-600 600V Voltage Continuity and Current Tester lets you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw current lets you check current up to 100A - without breaking the circuit. The tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReach test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt. The T5-600 automatically measures volts ac and volts dc with precise digital resolution and displays resistance to 1000Ω. The tester is rugged enough to withstand a 10-foot (3m) drop. The test leads accept Fluke accessory test clips. An auto off mode helps to conserve battery life. Optional holster attaches to a belt and neatly stows test leads. All inputs of the T5-600 are protected to EN61010-1 CAT III 600V and the T5-1000 to EN61010-1 1000V CAT III rating. UL, CSA and VDE listed. Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.

• Automatically measures volts ac and volts dc with precise digital resolution
• Displays resistance to 1000Ω
• Easy and accurate OpenJaw current measurement
• Optional holster attaches to a belt and neatly stows test leads
• Can stay connected much longer than solenoid type tester

User questions & answers

Question:	Are you really sure about tenth of a volt? Manual says 1V resolution, and I own one of these and can't make it show tenths, DC or AC
Answer:	I don't currently have one of these. But, the spec sheet indicates .1A resolution on the current measuring (A) scale. All of the voltage scales have 1 V resolution.
Question:	Does the screen light up
Answer:	No it doesn't... That's my only issue
Question:	Is there any way to mount a TPAK hanger on a T5-1000? I would definitely purchase this if I could hang it off the side of a rack in a data center
Answer:	What a good convenient meter. Unfortunately the only way to hang it is if you improvise your own solution. Perhaps the accessory pouch available for the meter would be a good starting place.
Question:	does this read dc amps
Answer:	No, it does not read DC amps. AC amps only. I almost bought a T5-600 based on the misleading answers to this question. Got a 362 instead - the 362 measures DC amps (the T5 series doesn't), and the 362 has one decimal for voltage - the T5 doesn't.

Product features

Fluke T5-600 Voltage, Continuity and Current Tester

Fluke T5 Electrical Testers let you check voltage, continuity, and current with one compact tool. Select volts, ohms, or current and the tester does the rest. OpenJaw current checks up to 100A - without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReach test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes.

Multifunctional

Test voltage, continuity and current all in one electrical tester. For safety and convenience the Fluke T5-600 comes built with auto select between AC and DC voltage.

OpenJaw current readings

Use the Fluke T5-600 OpenJaw to measure current without contact or breaking the circuit with a 12.9mm or 0.5 inches diameter wire.

Measure without breaking the circuit

Easily check amperage on appliances, motors, compressors and other equipment with the Fluke T5-600 without breaking the circuit.

Rugged and reliable

The go-to tool for electrical and HVAC troubleshooting the T5-600 is extremely rugged. Rugged enough to withstand a 10 ft (3 m) drop to make sure it lasts tough job site.

Product description

Non-contact AC voltage detector and LED flashlight combined into one easy to use pen-style design. The LVD2 is a CAT IV 600 V rated non-contact detector that is suitable for commercial and industrial applications. The LVD2 includes dual sensitivity turning blue 1 to 5 (2.54cm to 12.7cm) from the source and red when at the source. Dual sensitivity. LED light with 100,000 hour life. Detects from 90 to 600 V AC. Rated to CAT IV 600 V. Dual Levels of Detection. Blue indicates proximity to AC Voltage source. Red indicates you're at the source. Operating temperature 0 to 50 degree C. Ultra-Bright White LED. 100000 hr bulb. AAA battery included.

• Dual sensitivity
• LED light with 100,000 hour life
• Detects from 90 to 600 V AC
• Rated to CAT IV 600 V
• Dual levels of detection

User questions & answers

Question:	Does this Voltage tester have an audible sound when voltage detected?? What is the "Counter Top Display"?? Thank you
Answer:	2 years, but they have been known to replace defective units longer than that...
Question:	Is there an audible beep
Answer:	The LVD2 doesn’t have a tip that fits inside an outlet.
Question:	What is the warranty on this product
Answer:	For sure you can see the readings in the dark. The LEDs are quite bright in lower light but just a bit hard to see in direct sunlight.
Question:	Does this have a tip like the original that will go inside an outlet or is it a flat edge
Answer:	I use it on computer systems for automotive purposes. No problem so far

Product description

These pocket - sized AC line voltage Detectors/testers have a nonconductive outer surface for user safety. Simply touch the tip of the Tester to an Outlet, terminal strip or cord; If the tip glows red and unit beeps, there's voltage in the line. Ideal for quick checks for energized circuits or ground faults. Available for sale in the United States and Canada only. Always on-uses special low-power circuitry to sustain battery life and for added dependability what's included: 2 AAA batteries detect voltage quickly and easily - without contacting metal! detects voltage without metal contact fits in shirt pocket for convenience all outer surfaces are nonconductive for safety.

User questions & answers

Question:	Why doesn’t it beep
Answer:	There're two different tick tracers, the rounded tip with a yelliw bottom does not have an on/off button but signals power on the touch .. I prefer that one
Question:	Is this for two different tick tracers? The picture shows two different styles
Answer:	no
Question:	does it have a on/off button or turn on/ off automatically
Answer:	No sound. It turns blue when close to voltage and pinkish when you are right on the hot conductor. No idea about the counter top display
Question:	Do you have the old disign of fluke voltAlert
Answer:	No audible beep.it is light sensitive when it is in voltage range it changes from blue to red .lpus its a flashlight also.

Product description

The Fluke T+PRO electrical tester offers all the functionality that electricians look for in volt meters and voltage and continuity testers. The T+PRO has three ways to detect ac/dc voltage: light, sound, and vibration. It offers the added functionality of a GFCI trip and continuity beeper, plus the convenience of a built-in flashlight. The T+PRO electrical tester comes with a rotary field indicator for troubleshooting three-phase systems, resistance measurement to 9.99 K ohms, as well as a backlit LCD display for easier viewing. Safer than traditional solenoid testers, the T+PRO is rated CAT IV-600 volt, CAT III-1000 volt, and complies with NFPA 70E*. The Fluke T+PRO electrical tester is sold one item per package, and is covered by a two year warranty. Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission critical status in manufacturing and service industries. From industrial electronic installation, maintenance and service, to precision measurement and quality control, Fluke tools help keep business and industry around the globe up and running. As electrical systems grow more and more complex, spikes, transients, surges, and sudden over voltage events become more common. These can trigger a sequence of events that may lead to serious injury. This is why test equipment must be designed to protect people who work in this high-voltage high-current environment.

From the Manufacturer

Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission critical status in manufacturing and service industries. From industrial electronic installation, maintenance and service, to precision measurement and quality control, Fluke tools help keep business and industry around the globe up and running. As electrical systems grow more and more complex, spikes, transients, surges, and sudden over voltage events become more common. These can trigger a sequence of events that may lead to serious injury. This is why test equipment must be designed to protect people who work in this high-voltage high-current environment. The Fluke T+PRO electrical tester offers all the functionality that electricians look for in volt meters and voltage and continuity testers. The T+PRO has three ways to detect ac/dc voltage: light, sound, and vibration. It offers the added functionality of a GFCI trip and continuity beeper, plus the convenience of a built-in flashlight. The T+PRO electrical tester comes with a rotary field indicator for troubleshooting three-phase systems, resistance measurement to 9.99 K ohms, as well as a backlit LCD display for easier viewing. Safer than traditional solenoid testers, the T+PRO is rated CAT IV-600 volt, CAT III-1000 volt, and complies with NFPA 70E*. The Fluke T+PRO electrical tester is sold one item per package, and is covered by a two year warranty.

• Backlit LCD display for easier viewing
• Display resolution of 0.1 V, ideal for troubleshooting low-voltage lighting
• Resistance (Ohms) to 9.99 kOhms
• Rotary Field Indication
• Display Hold for easier viewing in hard-to-test areas

User questions & answers

Question:	Hi, is the voltage display on LCD represent low or high impedance value? Let me clarify...if you detect a ghost voltage, say, 60vac, it obvious will not lite nor vibrate the meter, will the LCD display ghost voltages or just show 0 volt
Answer:	These leads are not removeable.
Question:	is this good for ghost voltage like a wiggy
Answer:	Can't provide a specific response to your question. However, I find the leads adequate for most things I use it for. This is a great tool!
Question:	Can I remove the test leads and plug in my own Fluke test leads
Answer:	yes it does beep. I am not certain if you will want to purchase this; I bought mine after having this same model for roughly 10 years. it had served me well, so I thought I would repeat that with another one. The new one did not last a year and ideal would not replace it. I used it for work about once a week and had it protected in my toolbox and it just died. Replacing the batteries did nothing for it, so for now I am using a much more expensive tester for the grunt work until I find need to just get a new simpler one like this one.
Question:	Are the test leads long enough to test a 220 dryer outlet receptacle
Answer:	Touch leads together to confirm continuity, and also test leads on a known true voltage - then test on your circuit in question.

Product description

The t6 1000 with field sensor technology lets you measure AC voltage and AC current with or without Test leads. Its compact design lets you access tight spaces that were previously not possible. With field sense selected, slide the open jaw around a cable and measure up to 200 A and 1000 V without breaking the circuit. The backlit display shows both values simultaneously. Plus, with frequency measuring and resistance measurement up to 100 kω, the T6 is the perfect front line tool for your tool bag.

• Measure voltage with or without test leads
• Be safer: Measure voltage to 1000V through the open fork, without test leads
• Be faster: Not need to open covers or remove wire nuts simultaneously measure voltage and current
• Be more efficient: Simultaneously measure voltage and current
• Be everywhere: 17.8 millimeter open fork is widest in the industry; Measure up to 200 a on 4/0 wires (120 Mm2)

User questions & answers

Question:	can you attach a magnet on the back like other Fluke meters
Answer:	The amp function of the T5-1000 and T6-1000 operate the same way.
Question:	Some of the pics shown, the black clip is shown connected to ground, the meter shows ac volts and current. in other pics only ac volts is shown why
Answer:	Yes, the replacement test lead set is the T5-RLS.
Question:	Does the "clamp-on" amp reading function work like in the T5-1000 (reliably, and without needing a ground
Answer:	https://www.amazon.com/Fluke-90-1000V-Pocket-Sized-Voltage-Detector/dp/B00PR02OHU Your previous reviews indicate it does not beep. Is that in the specs?
Question:	can you replace the test leads
Answer:	It is one tracer

Product features

Fluke T6 Electrical Testers with FieldSense technology

Measure voltage up to 1000 V ac through the open fork, without test lead contact to live voltage.+ Without opening covers or removing wire nuts. On wires up to AWG 4/0 (120 mm2), carrying as much as 200 A. It will change your job. Safer. Faster. Easier.

The Fluke T6 Electrical Testers

Thanks to the new FieldSense technology, the T6 makes work safer as you can measure voltage up to 1000 V ac through its open fork. Having the capability to measure voltage and current at the same time, together with eliminating the need to open covers or remove wire nuts, allows you to be faster and more efficient when taking measurements. In addition, the open fork is the widest available in the industry and can measure wires up to AWG 4/0 (120 mm2) carrying as much as 200 A.

What type of applications?

Commercial and light industrial electricians can use T6 Electrical Testers for basic troubleshooting, verifying voltage and continuity values as well as testing individual circuits while quickly checking current and voltage measurements without test leads. These devices easily fit in your pocket, making them easy to access on the front-line for electricians of all industries.

Why use the T6 Electrical Tester?

Typically, electricians encounter junction boxes crowded with wires, so finding the right connection point poses a challenge. With the T6-600 or T6-1000 you take measurements by sliding a single conducting wire into the open fork.

T6 Electrical Testers go beyond simple detection. They actually measure ac voltage, current and frequency without test leads. With the use of the provided test leads, the tools are also able to measure ac/dc voltage, resistance and continuity. The T6 testers use proprietary FieldSense technology, which makes measuring the voltage source safer for the electrician or technician performing the test.

How FieldSense Works

FieldSense technology is truly a breakthrough in how voltage is measured. While the technology in the T5 detects a magnetic field to derive an ac current measurement, the new technology detects an electrical field. Fluke Research and Development teams first developed the open-fork voltage sensing technology, which involves transducing and calculating a known signal to derive measurements for the source voltage.

Fluke’s New T6-1000 Electrical Tester – Measure voltage without test leads

Now measure voltage the same way you measure current, without test lead contact to live voltage. FieldSense technology lets you slide the open fork over a conductor and see the voltage level.

Be Safer: Measure voltage to 1000 V ac through the open fork, without test leads.

Be Faster: No need to open covers or remove wire nuts.

Be More Efficient: Simultaneously measure voltage and current.

Be Everywhere: 17.8 mm open fork is widest in the industry; measure up to 200 A on 4/0 wires (120 mm2).

Product description

With its integrated non-contact voltage detection and the AutoV/LoZ function preventing false readings caused by ghost voltage, the Fluke 117 Electrician's Multimeter is the ideal multimeter for electricians. In fact, users around the world have said their 117 is an investment in accuracy. The Fluke 117 provides Min/Max/Average readings, measuring frequency and capacitance. With its easy-to-use design, the Fluke 117 will save you time, allowing you to move from job to job with ease. Surge protection 6 kV peak per IEC 61010–1 600 VCAT III, Pollution Degree 2

From the Manufacturer

Compact true-rms meter for commercial applications. The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools. The 117 includes integrated non-contact-voltage detection to help get the job done faster.

• VoltAlert technology for non-contact voltage detection
• AutoVolt automatic AC/DC voltage selection. DC millivolts - Range : 600.0 mV, Resolution : 0.1 mV
• Low input impedance: helps prevent false readings due to ghost voltage
• Large white LED backlight to work in poorly lit areas
• True RMS for accurate measurements on non-linear loads.Operating temperature:-10°C to +50°C.Battery life:400 hours typical, without backlight

User questions & answers

Question:	Can this multimeter be used for an Automtive Tech
Answer:	While this multimeter can do plenty of things for automotive. Most serious mechanics get the 87 or 88 series.
Question:	what is the range of the capacitor that can be tested in this model
Answer:	hope this helps. Range/Resolution: 1000 nF / 1 nFRange/Resolution: 10.00 μF / 0.01 μFRange/Resolution: 100.0 μF / 0.1 μFRange/Resolution: 9999 μF / 1 μFRange/Resolution: 100 μF to 1000 μFAccuracy: 1.9% + 2Range/Resolution: > 1000 μFAccuracy: 5% + 20%
Question:	Can this multimeter be used on vehicles for a parasitic load test? I don't want to spend over $400 for the Fluke 88 as it is for personal vehicle use
Answer:	it has been used on motorbikes for sure. It just needs to be in amp mode. If you're doing parasitic load, then you're focused on DC Amps. The 117 has up to 6, while the 88 has up to 10. I don't see a big issue as you're just doing parasitic, not actual use. If anything actually pulls more than 6, you'll blow the internal fuse and have to replace it, but that's about it. Shouldn't be a problem(I've just tested mine on my car and it works).
Question:	What are the differences to pick between the Fluke 117 and the Fluke 115? My intended use would for ham radio and kit-building of electronic kits
Answer:	The 117 adds • VoltAlert™ technology for non-contact voltage detection • AutoVolt automatic ac/dc voltage selection Both are handy but not essential. Be aware of none of these 'electrician' Flukes (115/116/117) read milliamps or microamps -- essential for electronics troubleshooting & design work but unnecessary for electrician tech work. That said, when reading current in amps they do seem to read accurate down to around at least 0.010 amps (10 milliamps) or so.
Question:	is it two prong or three prong? can't see it in the picture
Answer:	It's actually made to be plugged into a grounded wall socket, replacing the 2 3-pronged outlets with its 6 available grounded outlets. It can even replace the outlet cover and be screwed into place. I've got a bunch of these and love them.
Question:	What are the actual dimensions of this unit
Answer:	against the wall, mine is about 4 inches wide, 4 3/4 inches tall, and about 1 3/4 inches deep
Question:	Will this work with half-switched outlets (where one outlet is always live and one is switched), or do all the outlets get power from only one outlet
Answer:	All power for this device comes from the TOP outlet of your receptacle -- so if that is switched then all outlets on this device will be switched (or if your bottom outlet is switched then all outlets on this device will NOT be switched).
Question:	Can this actually completely replace the existing outlet wall plate, or does it only plug in/screw on TOP of the wall plate
Answer:	This can replace the existing wall plate -- that's how I am using it.

Product features

More Outlets

6-outlet wall plug adapter power strip expands 2 grounded outlets into six to power any smartphone including iPhone and Android, lamps, laptops, hair dryer or other electronic device

Space-Saving Design

This outlet tap has three standard outlets and three extra wide spaced outlets to fit your bulky cell phone charger or power adapter

Compatibility

This GE wall plug works with your existing grounded 3-prong 2 outlet duplex receptacle to create a charging station in any room in your home, office, bedroom, kitchen, living room, dorm room or any area with limited outlets

Fluke 117 Electrician’s Multimeter

The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools. The 117 includes integrated non-contact voltage detection to help get the job done faster.

Complete the Tool Belt

The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools.

Hands Free Operation

Compatible with optional magnetic hanger (ToolPak) for hands free operation.

Non-Contact Voltage Detection

The 117 includes integrated non-contact voltage detection to help get the job done faster.

Perfect for Preventative Maintenance

The Fluke 117 is a key piece of a full tool belt of Fluke tools for all preventative maintenance needs.

Product description

The product Type is voltage detector, 40 to 300VAC, product is voltage detector, manufactured by Fluke.

User questions & answers

Question:	Audible noise
Answer:	The T6-1000 is able to show volts and current at the same time, but the T6-600 is only able to show one reading at a time.

Product description

Digital multimeter replacement fuse. Nominal current: 15A. Maximum voltage to ground: 600V.

• Digital multimeter replacement fuse
• Nominal current: 15A
• Maximum voltage to ground: 600V

User questions & answers

Question:	This work for fluke 75, replace fast fuse 15a 600v
Answer:	If you go to the fluke site it will tell ya for sure, then buy a couple from amazon, they're dirt cheap.
Question:	Is these fuse KTK-15? Need to replace fuse in Fluke 23 Series II Multimeter
Answer:	No audible noise, only light turns red when the line is hot, blue light if it’s not hot. With a mini flash light that helps a little it if needed. It’s a cool device.
Question:	Does this fuse work in the fluke 73 series ll multimeter? thank you
Answer:	The Fluke TPAK meter hanging kit will work with the T6-1000 tester . This kit contains a magnetic holder .

Product description

The Fluke true rms clamp meter is a great clamp meter for general, grab and go troubleshooting needs. The Fluke 323 AMZN is ideally suited for current measurements up to 400 amp in tight cable compartments.

• Digital clamp meter measures ac current to 400 amp, AC and DC voltage to 600 v, and resistance to 4 kilo ohms. Does not measure dc current
• True RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
• Jaw opening measures current in a conductor up to 30 millimeter without touching or interrupting the circuit. Resistance accuracy: 1.0% ± 5 digits
• Audible continuity sensor confirms that the circuit conducts electricity
• Meets IEC safety standard 61010 1, and is rated for CAT IV installations to 300V and CAT III installations to 600V

User questions & answers

Question:	I need to measure volts, amps and hertz to adjust my generator. Does this model measure hertz
Answer:	hello this model does not measure herzt.
Question:	if I, say, clamp a 120V AC lamp cord, will it measure amps correctly? What about a 220V pool pump motor? Thanks
Answer:	No. You have to use a AC line splitter tool found here on amazon. The line splitter plugs into the wall and then the lamp plugs into the line splitter. Then you can use your clamp meter to measure amps. this separates the neutral and the hot wire so you can meassure the amperage.
Question:	Is the hold feature peak or last reading
Answer:	The hold is the last reading
Question:	The 323 will measure DC amps as well as AC? What range will this tester handle in DC amps
Answer:	no just ac clamp around wire

Product features

Fluke 323 True-RMS Clamp Meter

The Fluke 323 clamp meter is a troubleshooting tool for commercial and residential electricians. It includes True RMS measurements, optimized ergonomics, and large display for efficient troubleshooting. Use it to verify the presence of load current, AC voltage, and continuity of circuits, switches, fuses and contacts. Its slim, compact size and rugged design make it well suited for measuring current up to 400 A in tight cable compartments.

Continuity detection

Resistance measurement up to 4 kΩ with continuity detection.

True RMS measurements

True RMS AC voltage and current for accurate measurements on non-linear signals.

Ergonomic

Slim, ergonomic design.

Rugged, reliable, and safe

CAT IV 300V/CAT III 600 V safety rating.

Product description

Troubleshoot advanced problems, perform preventive and predictive maintenance tasks in real time, to identify insulation breakdown using only one simple-to-use tool for years, Fluke has built a reputation for producing the most reliable, rugged, and innovative digital multimeters in the world. Developed for commercial and industrial applications, the Fluke 1587 FC Insulation Multimeter is the only meter that gives you a high-performance DMM, a state-of-the-art insulation tester, and wireless connectivity for sharing and tracking results all in one unit.

• PI (polarity index) /DAR (dielectric absorption ratio) with Trend It graphs identifies problems faster
• Memory storage through mobile Fluke Connect Measurements App eliminates writing down results, reduces errors and saves data for historical tracking over time
• Temperature Compensation through App helps establish accurate baselines and relevant historical comparisons
• VFD low pass filter for accurate motor drive measurements; Includes auto discharge of capacitive voltage for added user protection
• Insulation test voltages 50 V, 100 V, 250 V, 500 V, 1000 V

User questions & answers

Question:	Is there a warranty
Answer:	Yes it does come with test leads.
Question:	does it come in a case
Answer:	You can use Fluke Connect to save data that can be exported for reporting.
Question:	Does it come with the Test Leads Thanks etc
Answer:	Yes it will work..I have a fluke 88 and it's fits fine
Question:	Can you print a test report
Answer:	This is a KTK-15 fuse. Package states that it is for Fluke Model 23 meters - and others.

Product features

Fluke 1587 FC Insulation Multimeter

The High-Performance 2-in-1 Insulation DMM The Fluke 1587 FC combined with Fluke Connect is a digital insulation tester with a full-featured, true-rms digital multimeter in a single compact, handheld unit, which provides maximum versatility for both troubleshooting and preventative maintenance. The Fluke 1587 FC Insulation Multimeter adds four powerful new diagnostic functions through the Fluke Connect measurements app:

Fluke 1587 FC Insulation Multimeter

Fluke 1587 FC Insulation Multimeter Whether you work on motors, generators, cables or switch gear, the Fluke 1587 FC insulation multimeter delivers impressive capability in a single unit. No longer do you need to go back to the truck, shop, or tool crib to get the extra tool you need to get the job done. The Fluke 1587 FC is rugged, reliable and easy to use--just what you would expect from Fluke.

Fluke Connect Enabled

Fluke Connect Enabled The Fluke Connect enabled 1587 FC also gives you the flexibility to test wirelessly how and when you want. Fluke Connect test tools communicate with the Fluke Connect free mobile app on your Android or iOS smart device, allowing you to share live measurements, monitor readings from safe distances, and get your job done easier than ever before. The wireless digital multimeter functions as the mobile hub, displaying readings from up to three-meter modules tools simultaneously from up to 20 meters away.

What's in the box?

Remote probe

Test leads

Alligator clips

K-type thermocouple

Hard case

User documentation

Product description

The new Fluke PRV240 Proving Unit is an easy-to-use, easy-to-sell product that will be in demand by environmental health and safety managers, plant safety officers, facilities managers and other managers concerned with electrical safety and compliance.

• PRV240 reduces the risk of shock and arc flash by validating the functionality of test tools without placing yourself in a potentially hazardous electrical environment
• Sources both AC and DC steady-state voltage - supplies 240 V DC/AC
• A single LED indicates functionality, making this unit a simple-to-use solution for verification of your test tool
• Compatible with both high impedance or low impedance multimeters, clamp meters or two pole testers
• Voltage is sourced through recessed contacts that are activated when tested probes are inserted to avoid accidental contact

User questions & answers

Question:	How do you know if the batteries are getting low or dead
Answer:	The box states that is was made in Taiwan. Very robust unit, like all of Fluke products.
Question:	Can this unit be used with a no-contact voltage detector? Like the Salisbury
Answer:	The Fluke PRV240 is a proving unit to verify that your multimeter is functioning/measuring correctly for AC and DC voltage measurements (240V). With your multimeter you would connect your test leads to the PRV240, view the displayed value, measure the primary voltage source with leads (view displayed value) and then check again on the PRV240.
Question:	What is the country of orgin
Answer:	There is a 3 year warranty starting from the date of shipment of the hardware.
Question:	The voltage is 240v isn't that a lil high for a ldl tester that falls in a Cat 1 so u need arc flash to just to test it in the shop
Answer:	Yes it does! This is what is included with the Fluke 1587FC: - Fluke 1587 FC Insulation Multimeter - Remote probe - Test leads - Alligator clips - K-type thermocouple - Hard case - User documentation

Product features

Fluke PRV240 Proving Unit

The Fluke PRV240 Proving unit is a portable, pocket-sized and battery powered voltage source used to very proper voltage measurement functionality of a multimeter, clamp meter or voltage tester. Check for proper operation of your test tools before attempting to verify either an energized or de-energized source. Using this tool reduces your exposure to shock hazard and arc flash.

Fluke PRV240 Proving Unit

Safely verify that your electrical test tool is operating properly before you conduct any live tests. Use the PRV240 Proving Unit to test your meter against a known live source before and after the actual measurement.

Reduce your risk of shock and arc flash

Using the concept of 'Test Before Touch' using the Fluke PRV240 Proving Unit, you can test your meter against a known live source before the actual measurement. This allows you to verify your test tool without unnecessary exposure to shock or arc flash.