13 best 6 in dial calipers

• metal
• Imported
• Dial face reads in both inch (black) and metric (red).
• Hardened stainless steel throughout.
• Inside, outside, step and depth measurement.
• Raised sliding surface prevents wear and defacement of graduations.
• Covered, stainless steel rack.

User questions & answers

Question:	does your caliper say "shock proof" in the dial? I just got mine, and and it does not say shock proof anywhere on it
Answer:	I bought the caliper when we were at our home in Tampa FL and left it there so I can't look at the dial, but I do not remember it saying shockproof.I am satisfied with the operation and accuracy of the instrument. Do you mean electrically shockproof? It is metal and surely if exposed to a wire with voltage on it you could be shocked. If you are worried about the utility of the tool in a rough physical environment I would say it is fairly shockproof that way. Does the product description say it is "shockproof". And even if so it would not necessarily have to have that written or stamped on the instrument.
Question:	Country of Manufacture? Think Amazon would get the clue to put this info on the product description
Answer:	Really? That isn't even necessary any more. There is very little doubt that it's made "in Asia" (the actual country being both immaterial and ambiguous) just like everything else in your life is made "in Asia" because people in North America and Europe are too greedy to work for small paychecks. Even those very rare things that are final-assembled in North America are built entirely of parts made somewhere in Asia, from Asian raw materials..
Question:	is anyone able to shed some light on what this tool's resolution might be? nothing is listed on this page by the manufacturer
Answer:	The scale is in 0.001 inches or 0.02 mm, so you should be able to read anything to the nearest thousandth of an inch or 2 hundredth of a millimeter.
Question:	Are these accurate and durable? How's the quality of construction
Answer:	An excellent buy for the money and well built. And yes they are accurate. Like any precision tool, they need to be handled carefully and kept clean. I've had mine for several months and having 40 plus years experience in machine shop, would recommend them. Are they as precision as a high end Mitotoyo? Probably not, but they don't cost $200 plus. So and excellent buy for the money.

Product description

Starrett Dial Calipers provide quick, easy, and accurate measurements of outside dimensions, inside dimensions, and depth. The dial caliper is the most versatile precision hand tool on the market and has been the first choice of metal working, woodworking, and machinist professionals for decades. This series features 0 – 6 inch measuring range and 0.001 inch graduation. It offers sharp, clear dial graduations, black graduations on satin finished bar, lock screws for sliding jaw, and dial bezel which is adjustable. It has a thumb-operated fine adjustment roll, knife-edge contacts, and positive spring-loaded, double pinion, anti-backlash control. The caliper comes included with a convenient carry case. The L.S. Starrett Company manufactures precision measuring tools, metrology, and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.

• FAST MEASURING: The Starrett Dial Caliper provides precise measurement of outside dimensions (OD) inside dimensions (ID), and depth. Use for metalworking, woodworking, automotive, and machining applications
• RANGE: This series features a 0 – 6 inch range, 0.001 inch dial graduation, and one revolution equivalent to 0.100 inch. It has a hardened stainless steel bar, measuring surfaces, rack, gears and depth rod
• FEATURES: This model offers sharp, clear dial graduations, black graduations on satin finished bar, lock screws for sliding jaw, and dial bezel which is adjustable
• VERSATILE: The dial caliper is the most versatile precision hand tool on the market and has been the first choice of metal working professionals for decades
• EASY OPERATION: It has a thumb-operated fine adjustment roll, knife-edge contacts, and positive spring-loaded, double pinion, anti-backlash control

User questions & answers

Question:	The System of Measurement listed above is metric. Isn't this model and English or inches model
Answer:	The details and description on this page indicates inches in both measuring range (0-6") and on the dial unit of measure indicated in the upper center of the dial (.001"). Both using the " symbol abbreviation for inches. I JUST ordered one of these and certainly hope it is not metric when it arrives. js
Question:	Is this American Made
Answer:	It says on their website that the only calipers made by Starrett are the 120 series. Everybody says it's disappointing, but why do you think they are so cheap? The 120's are like $200

Product description

Professional Precision Dial Caliper

When it comes to calipers, Anytime Tools is the professionals choice. Quick and accurate measurement of Outside, Inside and Depth.

• Super high precision gears.
• Double Shock Proof Design.
• Zero Parallel Tolerance.
• Ultra Smooth operation.
• Precision Dial 0.001" Graduation / 0.1" Per revolution
• Range: 0-6"
• Measure External, Internal and depth
• Solid Hardened stainless steel
• Thumb roll for rapid setting
• Knurled lock assures precise settings
• Padded case included

• Super high precision gears. Double Shock Proof Design. Zero Parallel Tolerance. Smooth operation.
• Precision Dial 0.001" Graduation / 0.1" Per revolution. Range: 0-6".
• Measure External, Internal and depth
• Solid Hardened Stainless Steel
• Padded case included

User questions & answers

Question:	are these coolant resistant
Answer:	Sure, the carfts this is used in is limitless, anything from toys to weapons to tools to plants to automotive design. You will get more fun from an outstanding caliper. I'm a jewelry designer, I owned at least 10 caliper on my working desk. But I always pick up this one to work, maybe just because it's so smooth
Question:	Does this read in millimeters
Answer:	Hi. This RBDC02 digital caliper by RexBeTi was made by high quality stainless steel. With 5 times fine polishing, it glides more smoothly than other poor finish caliper and it will definitely show the precision measurements as you wish!
Question:	What is the size of the dial
Answer:	Both tools made in japan
Question:	Is this made in the USA
Answer:	Yes, the wooden case will be included in the price you pay.

Product description

Accurate measurements are readily at your fingertips with the Stalwart Dial Caliper. This tool effortlessly provides quick, accurate measurements of outside dimensions, inside dimensions, depth and step to the .oo1”. The stainless steel frame and shockproof design also help to ensure accurate position while in use, making it ideal for projects both at home and on the job. IMPORTANT: Avoid buying counterfeit products and transacting with unauthorized sellers. Look for our logo on the packaging for every one of our products. Stalwart is committed to providing the consumer with the absolute best price and value on all of our products, which we ensure by applying a rigorous Quality Control process. Stalwart a registered trademark protected by U.S. Trademark law and will be vigorously defended.

• PRECISE MEASURING- The Stalwart shockproof stainless-steel dial caliper has dial graduations of 0.001” and.001” for accuracy. Additionally, the easy to use thumb-roll mechanism and position lock allow for sure adjustment and added precision.
• DURABLE CONSTRUCTION- Made of stainless steel this dial caliper will hold up during tough working situations. The included plastic carry case protects your caliper and makes it readily available for on the go projects.
• MOBILE- The stainless-steel caliper is lightweight and easy to carry anywhere. Great for home or work projects.
• PRODUCT DETAILS – Measurement range 0-6 inches. Measures inside, outside, depth and step. Made of stainless steel and includes a plastic carry case.
• SATISFACTION GUARANTEED –Stalwart is committed to providing consumers with the absolute best price and value on our entire line of products. NOTE: This is an exclusive product of Stalwart and ONLY calipers by Stalwart are GUARANTEED to be genuine

User questions & answers

Question:	In the description it says both metric and inches. Which is it
Answer:	I purchased the Stalwart Model 75-ST6045 6” Dial Caliper. It reads inches only.
Question:	Where is this item manufactured
Answer:	I'm pretty sure it's made in the U.S. One I will add is it's very heavy very well made. Not some piece of lightweight junk. You won't be disappointed if you choose to purchase this item.

Product description

SE is proud to present our 6” Dial Caliper (SAE Only). Use the easy-to-operate position and dial lock screws for precise adjustments. This caliper comes with its own storage case and has a rolling thumb mechanism for smooth, one-hand use. The accuracy of this stainless steel caliper is +/- 0.001". The retracted length is 9-1/8" and the extended length is 15-1/4". The dial diameter is 1-1/2".

SE is committed to providing the customer with the best source for value possible on the market. You will enjoy the quality, function and usefulness of our SE 780DC 6” Dial Caliper (SAE Only).

IPR Rights Notice:

Important: Avoid getting counterfeit items. Genuine SE products come with the SE logo on the packaging.

SE is a registered trademark protected by US Trademark Law.

• 3-way measurement: inside, outside, depth
• Measures only in SAE
• Measuring range: 0-6"
• Resolution: 0.001"
• Storage case

User questions & answers

Question:	Should the caliper come pointing at 0? If not, how do i calibrate
Answer:	Set it to 0 before measurement
Question:	Is this coolant resistant
Answer:	I can't imagine that it would NOT be resistant to any automotive coolant. It might not hurt to rinse it off with plain water, if you expose it to one of the typical coolants. Doesn't that stuff get a little gummy when it dries?
Question:	is this metric or SAE scale
Answer:	Sae in 100th graduations
Question:	what is the diameter of the dial
Answer:	The dial outside diameter is about 1.5 inches.

Product features

6” Dial Caliper

The SE 6” Dial Caliper includes easy-to-operate positioning and dial lock screws for precise adjustments. This caliper comes with its own storage case and has a rolling thumb mechanism for smooth, one-hand use.

Dimensions

This Dial Caliper has a retracted length of 9-1/8" and the extended length is 15-1/4". The dial diameter is 1-1/2".

Storage case

This caliper comes with its own storage case that helps to minimize the damage done to you caliper.

3-Way Measurement

Measures only in SAE, Measuring Range: 0-6 inches. The accuracy of this stainless steel caliper is +/- 0.001".

Product description

4-way measurement for outside, inside, depth and step Dial Caliper, 6", 0.001"

• Accuracy 0.001''. Dial Caliper, range 0 -6"
• Adjustable dial for easy reading
• 4-way measurement for outside, inside, depth and step
• Covered rack for longer life and chip free operation
• One revolution. Positive lock

• Take Precise Measurements - having precision reloading tools and accessories such as the Hornady Dial Caliper measuring tool 050075 is ideal for accurately measuring case and bullet length, inside and outside diameters, primer pocket depth, overall cartridge length, and more
• Shock-Resistant Dial - easy to use dial caliper 6 inch with dial and pointer that is accurate to 0.001 inch. The pointer rotates within the dial as the slider moves back and forth along the blade. The measuring ruler reads up to 6 inches
• Great Caliper Tool for Reloaders - this Hornady caliper measuring tool will ensure you have a properly measured case and cartridge for your next range day. The convenient storage case is perfect for storing the unit when not in use or for travel to take with you
• Easy to Operate - durable stainless steel calipers feature a knob at the top of the caliper that can be tightened to lock down a measurement and a knob at bottom of dial face that can be loosened to allow face to turn and thereby 'zero' the caliper
• Hornady Reloading Equipment - Hornady offers a variety of measuring tools needed to get into the reloading zone and achieve better accuracy, reliable results, and having fun. Having a set of quality tools at your ammo reloading bench is crucial for an accurate shooter

Product features

Hornady Precision Measuring | Calipers

Precisely measure case length, inside and outside case diameter, bullet length, primer pocket depth and overall cartridge length. Features quick repeat and measuring speed, an extra large LCD screen and accuracy to .001." (inches/metric)

• Extra-large, easy-to-read LCD screen
• Knob locks slide in position
• Easy-to-operate adjustment wheel
• Accuracy of .001" / .02 mm

Protective storage case and battery are included.

Dial Caliper | Item #050075

The Dial Caliper features stainless steel construction with shock-resistant dial is accurate to +/- 0.001". Four-way measurement capability: inside, outside, depth and step. Slide may be locked in any position for precise measurements. Thumb wheel aids in easy opening and closing. Includes plastic storage case. (inches)

About Us

'Ten bullets through one hole' was the philosophy of Joyce Hornady, the company's founder.

Founded in 1949, Hornady Manufacturing has become a world-leading innovator of bullet, ammunition, reloading tool and accessory design and manufacturing. At Hornady, ammunition is more than their livelihood. It's a major part of their daily life. Hornady acquired SnapSafe in 2015 to complement and expand their offerings in the security products market segment.

Product description

This hardened stainless steel dial caliper features dual scales - a fractional inch scale with 1/64 inch graduations on the white outer scale and a Decimal inch scale with 0.01 graduations on the green inner scale. Comes packed in a padded plastic storage case.

• Dual Scales: Inch and Fractional Displays
• 4-Way Measuring Readout - Accuracy: +/- 0.001" per 6 inches

User questions & answers

Question:	Can this be calibrated
Answer:	No
Question:	Is this product made in the United States
Answer:	Approx 1 3/8" diameter not including bezel, (the black ring around the outside.) 1 1/2" diameter overall.
Question:	Does this also read metric on the tool. The picture shows it does
Answer:	No, but they are pretty nice...
Question:	Can this caliper be locked at a given setting
Answer:	Can"t answer that question Just check it with a set of gauge blocks. With the caliper closed just zero it and test on gauge block.

Product description

Our 6-Inch fractional dial caliper is made of stainless steel and comes in a plastic storage case. It features a 1-1/2-Inch dial that is easy to read when taking outside, inside, depth and step measurements. The dial face or bezel can be rotated to set zero anywhere on the scale and has a bezel clamp to lock the dial in place for making deviation measurements. The range per revolution is 1-Inch, with an accuracy of +/- 0.001-Inch, graduated in 0.010-Inch on the inner ring and 1/64-Inch on the outer ring. Also features a knurled thumb roller, positive lock and precision ground jaws.

From the Manufacturer

Our 6-inch fractional dial caliper is made of stainless steel and comes in a plastic storage case. It features a 1-1/2-inch dial that is easy to read when taking outside, inside, depth and step measurements. The dial face or bezel can be rotated to set zero anywhere on the scale and has a bezel clamp to lock the dial in place for making deviation measurements. The range per revolution is 1-inch, with an accuracy of +/- 0.001-inch, graduated in 0.010-inch on the inner ring and 1/64-inch on the outer ring. Also features a knurled thumb roller, positive lock and precision ground jaws.

• Professional Grade Stainless Steel Construction
• 6-Inch Capacity Fractional Dial Caliper with Plastic Storage Case
• Resolution: 0.010-Inch | 1/64-Inch
• Accuracy: +/- 0.001-Inch
• Ranger per Revolution: 1-Inch

User questions & answers

Question:	Does the case have a pinned hinge or is it a flexible plastic "hinge
Answer:	It is some sort of a pinned hinge. Don't know if it is metal or plastic pin. It is definitely NOT a flexible plastic hinge. It's a good case. Not the most expensive case but the instrument is quality. It's worth it. One of my best purchases ever. I use it all the time.
Question:	How do you calibrate the dial? Just got this and there are no instructions included and the dial is off by
Answer:	Close the calipers making sure nothing is in the jaws. Loosen the knob on the bottom of the dial then rotate to dial to zero. Tighten the knob
Question:	What kind of battery does the Avenger Digital Caliper use and can I buy a replacement battery door
Answer:	The Oshlun MTDCF-06 6-Inch Stainless Steel Fractional Dial Caliper is a mechanical dial caliper and does not have a battery or battery door. I don't think it is the same as the "Avenger." I use it more than all my digital calipers and all micrometers. The Oshlun is one of my favorite things in the shop without a blade.
Question:	How big is the dial
Answer:	The dial is 1 1/2" across and very readable. The fractions are on the outer circle and printed in 1/16 1/8 3/16 and so on with 'tick marks' every 64th. The inner dial is in 100's of an inch. I'm very happy with this caliper. It replaced one the had the 100's on the outer dial and the fractions on the inner. It was hard to read. This is a very good price and quality.

Product features

Oshlun MTDCF-06 6-Inch Stainless Steel Fractional Dial Caliper

Our 6-inch fractional dial caliper is made of stainless steel and comes in a plastic storage case. It features a 1-1/2-inch dial that is easy to read when taking outside, inside, depth and step measurements. The dial face or bezel can be rotated to set zero anywhere on the scale and has a bezel clamp to lock the dial in place for making deviation measurements. The range per revolution is 1-inch, with an accuracy of +/- 0.001-inch, graduated in 0.010-inch on the inner ring and 1/64-inch on the outer ring. Also features a knurled thumb roller, positive lock and precision ground jaws.

Product description

Starrett 943 deluxe padded case for 6” dial calipers is an appealing yet protective steel case, covered in red vinyl. The interior is charcoal-colored foam, fitted to provide maximum protection for the tool inside. The vinyl helps to protect the case from scuffs.

The L. S. Starrett Company was founded in 1880, originally manufacturing bench vises, squares, and other tools. They acquired other companies throughout the years, expanding their services into making precision measurement instruments and tools, such as calipers, micrometers, saw blades, and gauges. Starrett is headquartered in Athol, Massachusetts and has manufacturing facilities in Brazil, the United Kingdom, China, and other locations.

• Charcoal-colored interior foam is fitted for tool protection
• Steel case for sturdy protection
• Vinyl-covered exterior to help protect case from scuffs
• Red vinyl color for visual appeal
• Fits 6” dial calipers

User questions & answers

Question:	I need the measurement of the tool inside. Even if it says 6 inch tool. Some tools are longer and still rated for 6 inch measurement so I need box
Answer:	1.5 inches in diameter. Volume not marked.
Question:	Will this case fit a starrett 125mea-6/150 vernier caliper
Answer:	The bottom part is very secure I’ve bought this item twice .
Question:	What are the outer dimensions of the case? (Glad to know you all possess a precise measuring tool to help me with this question
Answer:	Yes, it will work with any hydrometer that is not longer than 13 inches or so
Question:	It appears this case has two slots for feeler (thickness) gauges. Does anybody know which models of gauges will fit in these slots
Answer:	Plastic. Plastic also cracks

Product description

The Fowler Shockproof stainless steel dial caliper has dial graduations of 0.001" with 0.001" accuracy, shockproof anti-backlash control, a sliding jaw with a lock, and a covered rack. This caliper is used for measuring inside dimensions (ID), outside dimensions (OD), depth, and step. This product has a 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Shockproof spring anti-backlash control with a heavy-duty spring offers increased accuracy over standard gear configurations. Backlash is the amount of clearance between mated gear teeth in the caliper controls that prevents the gear teeth from jamming. It is undesirable to have much backlash due to the lack of precision offered by the increased amount of play between gears. Certain gear designs can minimize or eliminate backlash; spring anti-backlash systems use a spring to add a compressive force, thereby minimizing backlash.

This caliper has a knurled lock screw to hold the sliding jaw in position and help ensure a consistent measurement. A covered rack prevents dirt and debris from clogging the gear, and helps prevent measurement errors. A thumb-operated fine adjustment roller allows for one-handed use.

The caliper measures 0.10" per revolution of the dial. The dial has 0.001" graduations, and the beam has engraved 0.1" graduations. The hardened stainless steel components, including the beam, measuring surfaces, rack, gears, and depth rod, offer corrosion resistance, increased accuracy, and long life. Self-contained movement eliminates gear misalignment, while the dual pinion drive mechanism reduces wear on the rack and pinion. An adjustable dial enables setting zero. The hardened stainless steel is polished to a satin chrome finish, to help prevent glare. This caliper comes with a fitted case.

Dial calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to measure inside, outside, and step measurements in standard or metric units. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides along it to take measurements. A circular dial indicator is fixed to the movable jaw on a toothed gear rack that transfers movement of the jaws to the dial needle. The base measurement is taken from the long beam, which provides the initial whole measurement in inches or centimeters, and added to the dial reading, which provides fractional measurements in inches or millimeters. A locking mechanism provides the ability to take differential measurements for determining the difference in measurements between two objects. Compared to digital calipers, dial calipers are more durable, but are more susceptible to shock damage and prone to getting dirt in the gears, which can cause accuracy problems. Vernier calipers are more durable than dial calipers because they do not have internal moving parts, but they can be more difficult to read. Dial calipers are commonly used in fields such as metalworking, mechanical engineering, machining, and carpentry.

Fowler, an American company, manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.

What's in the Box?

• Fowler Shockproof 0-6” dial caliper

• Fitted case

User questions & answers

Question:	In the video, he mentions measuring "step" could elaborate what "step" is
Answer:	Good explanation at this link: https://www.wonkeedonkeetools.co.uk/calipers/how-do-you-use-a-vernier-caliper-to-measure-step/
Question:	Is this a 12inch
Answer:	Measures lengths up to 6.5 inch. Tool is 9 3/8 inches long.
Question:	Does this caliper have a fine knife edge for measuring od of small groves? (i'm not talking about id
Answer:	There is a finer edge along the inside of the blades. How fine? Not sure if fine enough for your applications. Otherwise their a great set of calipers. I use the Fowler’s more often then my very expensive digital ones.
Question:	It's a Swiss style but doesn't read in mm's
Answer:	Does does not measure in metric.

• Range: 0-6'', Resolution: 0.001'', Hardened stainless steel
• Direct reading to .001'' in large clear dial/.-100
• Measuring face hardened, precision ground and micro-lapped for absolute accuracy
• Adjusting slide for fine adjustment. Inside, outside, and depth measurements
• Satin chrome finish, crisp engraved graduations. Clamp for repetitive setting

User questions & answers

Question:	Is it true the roller wheel is stationary. ? does not move, Looking at the picture it looks like it does. This are useless
Answer:	The wheel moves with your thumb and allows for precise controllable pressure between the jaws that measures what is between them. Nice instrument as long as you receive the same one I purchased with a red case.
Question:	Is it true the roller wheel is stationary. ? does not move, Looking at the picture it looks like it does. This are useless
Answer:	Unfortunately, the roller wheel was stationary on the one I purchased in 2017 (Accusize P920-S214).
Question:	Made in USA
Answer:	Nope
Question:	Does this product have any certification paperwork
Answer:	I don't recall receiving any certification paperwork other than the advertised calibrated to 0.001". I would also point out that the "roller" is stationary, does not roll, and as a result it's more difficult to get accurate readings.

Product features

Specifications

• Range: 0-6''
• Resolution: 0.001''
• 0.100" single revolution
• Accurate to .001'' per 6''
• Direct reading to .001'' in large clear dial/.-100

Features

• Hardened stainless steel
• Measuring face hardened, precision ground and micro-lapped for absolute accuracy

Features

• Adjusting slide for fine adjustment
• Satin chrome finish, crisp engraved graduations
• Clamp for repetitive setting
• Accurate to .001'' per 6''
• Covered rack

Features

• Inside, outside, and depth measurements

Product description

Precision Inspection Set

The 3 most commonly machinist inspection tools in one great package. 6" Stainless Steel Caliper Features fully hardened frame and satin chrome finish, 1" Outside Micrometer with carbide tipped anvils and ratchet stop 0-1 in. (.0001 Grad) and 6" Stainless Steel Rule all Fitted in a plastic box.

Features:

• Dial Caliper
  • Measure 0-6" @ 0.001 Graduations
  • Shock Proof
  • Stainless Steel Hardened
• Micrometer
  • Measures 0-1" @ 0.0001 Graduations
  • Carbide Tipped Anvil
• Ruler
  • Measures 0-6"
  • Stainless Steel Hardened

• Quality machinist grade inspection tool set
• Dial Caliper: Measure 0-6" @ 0.001 Graduations Shock Proof Stainless Steel Hardened
• Micrometer: Measures 0-1" @ 0.0001 Graduations Carbide Tipped Anvil
• Ruler: Measures 0-6" Stainless Steel Hardened
• Molded case

User questions & answers

Question:	are these calibrated and certified calibrated
Answer:	si he quedado satisfecha con la calidad del producto y la atencion prestada