14 best gas storage cans

Product description

Made of durable HDPE with barrier materials to virtually eliminate hydrocarbon emissions. Holds 5 gallon, (20 liters), of your gas and oil mixes and exceeds California Air Resource Board (CARB) and EPA requirements for portable fuel containers. The 5600 was designed with two handles for easier use and handling. In addition, this can was built with a wider base and lower center of gravity to reduce the chance of a can tipping over and if it does; our spouts close automatically with an airtight seal.

• Spill Proof Spout
• Two Handles
• Durable HDPE Plastic
• Exceeds CARB and EPA requirements
• Shipping included in price!!

User questions & answers

Question:	Will it smell up my car
Answer:	no sorry I never have never tried the unit is light put with piles of mail in it it can get quite heavy it holds a lot
Question:	its it me or is it cheaper to buy them seperate
Answer:	I would say they wouldn't work great over a door. The metal lattice-like wires cover up to the top of the frame, so you couldn't hang it over a door unless you have really small hooks that will fit through the lattice. Mine are not flush to the wall when screwed in, so hanging them over a door would likely mean they will hit the door and swing around whenever the door is moved. Also causing the metal to scratch the door. Unless you screwed them into the door just as you would on a wall.
Question:	Is there a screen inside these gas cans
Answer:	The baskets are 10 inches wide by 9.5 inches high. At the top of each basket they extend 3.5 inches from the wall. At the bottom of each basket, it is about 2.25 inches from the wall.
Question:	I assume these can contain diesel
Answer:	They only fit vertically.

Product description

If you've purchased a gas can in the last 10 years, you've likely experieced the overly complex design and poor functioning spouts on the market today. The GarageBOSS Press 'N Pour Gas Can provides a long awaited to solution with the easiest to use gas can in the market. Designed with a simple and intuitive press button spout, you can spend more time getting the job done and less time figuring out how to get gas out of the gas can. The press button operation gives you precision flow control for an accurate, no-mess pour which is perfect for filling power equipment like lawn movers and snowblowers. The GarageBOSS Press 'N Pour 2+ Gallon Gas Can is the perfect solution to keep your small to medium size gas powered equipment running year round or to mix your 2 cycle oil.

• Fit Type: Universal Fit

User questions & answers

Question:	Can you throw the silly nozzle away and use a standard universal spout
Answer:	Yes, it comes in a brown box.
Question:	The red stopper on the bottom of the spout will not let the gas flowdoI need to remove it
Answer:	I used command strips on mine. I used the Velcro ones that can hold up to 16 pounds and it seems to be holding up just fine.
Question:	Will this hold 2 1/2 gallons? I don’t understand
Answer:	Approximately 16" apart. These items are hand-made and we do request to do proper measurements before installation on the wall.
Question:	What is the flow rate per minute on this gas can
Answer:	These slots are meant for standard-size envelopes, but I have put magazines folded in half lengthwise in it. Not much else will fit in there with the magazine though.

Product features

Life Can Be Complicated, Your Gas Can Shouldn't Be

You expect certain DIY projects to be challenging, that's part of the fun (or what you think will be fun before you start). But you don't expect getting fuel out of your Gas Can to be the hardest part of your day. If you read the reviews on most Gas Cans sold today, that's exactly what's happening. The GarageBOSS Press 'N Pour Gas Can proves that you can make a reliable, compliant fuel container that's actually easy-to use. The simple press button operation and precision flow control make filling your machines easier and reduces the chances to overfill or spill. Available in 1+ Gallon, 2+ Gallon and 5 Gallon sizes.

Simple Press Button Pour

Simply press the button forward and down to start the flow of fuel. No anchoring, twisting or pushing on the can. When your machine is filled, simply release the button.

Precise Flow Control

Most machines found in the average Garage or Shed have limited fuel capacity and can be easy to overfill. The Press 'N Pour lets you to control the flow of fuel to prevent spills. The translucent spout extension allows you to see the fluid entering the opening.

Fast Flow

For larger machines, the Press 'N Pour gives you a fast flow rate to empty the can quickly. For the fastest flow rate, simply unscrew the spout extension.

Dust Cap Holder

'Where did I put the Dust Cap?' No more lost dust caps, simply place the cap on the holder on the spout housing to always keep it in reach and in sight.

Product description

The new Fuel Station is UN/DOT approved for the transport of gasoline by motor vehicles and to gravity dispense fuel into gas powered portable equipment, vehicle fuel tanks or other approved containers. Built with safety the number one priority, this Steel Portable Fuel Station has been vigorously tested for leakage, rupture, stability, abuse and endurance. It was specially designed to be bolted into a trailer for those needing to transport fuel. Dimensions: 39 Inches L x 14.5 Inches H x 12 Inches W. Perfect for: Landscaping – Farming – Golf course maintenance – Recreational – Outdoor use with small engines – Bolting into your trailer – Reducing trips to the gas station

• Durable welded steel tank
• UN/DOT approved
• Gravity feed tank
• 10' dispensing hose
• Built-in shut off valve
• Ground wire for safety
• Squeeze handle dispenser

User questions & answers

Question:	Can i place this tank on cinder blocks and if so where do I place the ground wire? Thanks
Answer:	Only if you leave them sitting in your car for an extended period of time which you should not do in any situation.
Question:	When storing this tank with fuel inside do you leave the vent on the fill cap open or can you store it fully closed
Answer:	Buying local for me is roughly $24 each. This is the best deal I've found (including online)... even ebay is $24-30
Question:	Can a diesel fuel filter be put inline
Answer:	Yes, there is indeed a screen in the set I just got :(
Question:	can this tank be used for Diesl or gas
Answer:	No cause diesel are yellow cans /red are gas /blue is kerosene

Product features

Ground Wire for Safety

Includes a ground wire with alligator clip for safety. Also includes grounded 10 foot dispensing hose.

Steel Tank

Durable welded steel tank with squeeze handle dispenser and built in handles for easy lifting.

Trailer Mounted

Can be mounted on a trailer for easy transportation.

Built-in shut off valve

Built-in brass shut off valve to stop the flow of fuel.

Product description

It is the only double walled storage shed in its class (horizontal storage sheds with 15 - 25 cubic feet of storage space). The Horizontal Storage Shed is durable and weather-resistant. An easy, hassle-free storage solution, it comes with a heavy duty, impact resistant floor and has a storage capacity of 18 cubic feet. The shed can accommodate one wood shelf (not included).

• Great for storing patio, lawn, and gardening tools and supplies ; The shed can accommodate one wood shelf (not included).
• Tough, double-walled construction and an impact-resistant floor protects items from inclement weather
• External Dimensions - 34 x 55 x 28 inches. Inside dimensions: 29 x 47 X 21 inches
• Will not rot or rust like metal or wood sheds, Easy assembly
• 1-shelf capacity (shelf sold separately); Storage Capacity: 18 cubic feet
• Durable: leak-resistant, dent-resistant and weather-resistant

User questions & answers

Question:	can I use this o house a portable generator? thanks
Answer:	Thank you for choosing Rubbermaid Home Solutions. Our goal is to provide our customers with the highest quality and service. We do not advised this to be use as its attended use for the Rubbermaid Horizontal Storage Shed, FG374801OLVSS.
Question:	Where can I get the shelf for the small horizontal shed? or has anybody made one, what are the dimensions
Answer:	I just measured the side-to-side distance and got a “1x6 “ board @ Home Depot. They will cut it to your measurement without charge !
Question:	Do you need to first open the top in order to open the front? I want to place this in a tight spot and won't be able to lift the top more than 1 inch
Answer:	yes the lid does need to be opened 1st to open thre front & i would say it's about 3 inches or so but I agree the loop that comes through the top could be cut off but then there would be nothing to keep the front doors closed
Question:	Will it store two generators? I need a total of (at least) 48 X 24 X 24 inches interior dimension
Answer:	No, this will not work for you. I just went outside and measured, the interior dimensions are: EXACTLY 48 inches wide from side to side, but the doors are not straight across, they are shaped like a wave and from front to back the measurement is only 20" at its narrowest and about 22 at the widest.

Product features

Rubbermaid Plastic Horizontal Outdoor Storage Shed

Quick-to-assemble, this storage unit is large enough to keep small gardening tools and patio supplies handy.

Customize this shed to fit your needs by adding an extra shelf.

Keep your belongings secure by attaching a lock to the exterior hasp. Shelving and locks sold separately.

Keep everything you need right where you need it

Enough space to comfortably store your most used and lawn and patio supplies, this convenient storage shed is compact enough to place in almost any area.

Customize with an extra shelf

Maximize your storage capacity by adding an extra shelf to keep all contents organized. Shelf sold separately.

Weather-resistant

Protects stored items from moisture, inclement weather, and sun-damage. Made from weather resistant plastic, this shed won’t rot or rust like metal or wood sheds.

Product description

The scepter flo N' go Duramax 14 gallon portable fuel caddy is siphon based and manufactured from durable, high-density polyethylene. It is designed for industrial, commercial, and recreational applications and comes with a 10' hose and hanger for easy storage. Made for use with gasoline, diesel, or kerosene fuels and is great to use with boats, generators, lawn tractors, snowmobiles, ATVs, and more.

Whether your fuel needs include watercraft, hunting and camping, generators, backyard power equipment, or professional landscaping tools, the Duramax Flo 'n' Go fluid transfer pump and rolling gas can make refueling a snap. The Flo 'n' Go is made of a durable, high-density polyethylene material in red that safely holds gasoline, diesel, or kerosene fuels. When it comes time to refill, the pump's patented Flo 'n' Go hand pump and pump holder handle takes over, letting you transfer fluids on level surfaces with minimal priming. And thanks to the dual mechanical shutoff valves at both the tank and hose, the tank's disconnection is spill-proof, providing a safe fuel transfer for both you and the ecosystem.

The tank includes a sizable 14-gallon/53-liter capacity and a 10-foot-long fuel hose, as well as a bolt-on hanger for convenient hose storage. And users will love the sturdy 6-inch wheels, which makes it a breeze to maneuver the tank over rough terrain. Other features include an ergonomically designed, heavy-duty top handle with extra-deep base unit handholds for transport; a UL-approved mechanically vented fill cap; and recessed grooves that provide nuisance-free strapping locations for safer transport. The Flo 'n' Go fluid transfer pump meets all DOT and UN transportation requirements.

• Duramax 14 gallon fuel tank on wheels, ideal for farm and rural use as well as marine and recreational use
• Ergonomically designed, heavy-duty top handle with extra deep base unit handholds for transport
• Perfect for use with outboard engines
• Molded-in feet keep tank off floor for increased ventilation and stability
• Accepts standard 1/4 NPT marine tank fittings
• Comes with MaxFlo Siphon Pump with at-the-handle pump control allows for auto-shut-off and restarts and clean, hassle-free siphon control
• Wheeled for easy transportation, high density polypropelyne for dent, corrosion and rust resistance

User questions & answers

Question:	Is there a power pump handle option
Answer:	You could but why not just buy a standard can then. The point of the Boss is its push button, positive control, no spill spout. The press & pour works great!
Question:	does this leak when layed down
Answer:	DU!!! That is a dust cover, you must remove it first and place it on the black spout so you do not lose it!!
Question:	Can you use this to pump or siphon fuel from another car so I can get fuel from our other car in times of emergency
Answer:	2+ means a bit more than 2 gallons. So if you do not let go of the gas handle at exactly the right time, you will probably not spill.
Question:	How to operate it
Answer:	It only holds two gallons. Why would anyone want to know the flow rate?

Product features

No Lifting - No Spills - No Overfills

The DuraMax is ideally suited for farm and rural use as well as cottage and marine applications. Made from high density polyethylene, the DuraMax fuel container is resistant to corrosion and denting. Its sturdy six-inch wheels and extra-deep handle make it easy to deliver fuel dockside when refueling boats or powered water craft.

Innovation in Fuel Transfer

DuraMax is a 14 gallon/53L, portable fuel container on wheels designed for industrial, commercial, and recreational applications. It is a safe, fast, and convenient way to refill gas-powered tools, lawn tractors, boat engines, generators, snowmobiles, ATVs, etc.

• Thumb button control for precise pouring
• 7/8-inch funnel spout fills even the smallest equipment
• Attached dust cover keeps your spout clean
• Integrated 20 mesh stainless steel screen
• CARB and EPA compliant

Product description

If you've purchased a gas can in the last 10 years, you've likely experieced the overly complex design and poor functioning spouts on the market today. The GarageBOSS Press 'N Pour Gas Can provides a long awaited to solution with the easiest to use gas can in the market. Designed with a simple and intuitive press button spout, you can spend more time getting the job done and less time figuring out how to get gas out of the gas can. The press button operation gives you precision flow control for an accurate, no-mess pour. The spout extension easily removes to provide a faster flow rate, which is perfect for filling power and recreational equipment like Ride-On Mowers, Tractors, ATVs, Snow Mobiles and motorized Watercraft. The GarageBOSS Press 'N Pour 5 Gallon Gas Can is the perfect solution to keep your medium to large size gas powered equipment running year round. container includes a child safe cap and prevents fumes from escaping, as well as unnecessary spills.

• Simple fuel dispensing, just press and pour
• Precision flow control to no-mess pours
• Ergonmic spout grip and lift assist indent under the can for a comfortable filling experience
• Includes spout extension and dust cap to keep dust and particles out of your fuel
• CARB/EPA Approved

User questions & answers

Question:	Does this leak or spill
Answer:	I don't use a ground wire. I store diesel in mine.
Question:	Once you depress the button does it lock in place while you are using it
Answer:	I store gasoline in mine with the vent shut, the flow valve in the closed position and out of direct sunlight. These tanks are well built and can handle the pressure.
Question:	Where is the gas can made... usa or somewhere else? please be specific
Answer:	A filter is unavailable for this tank.
Question:	will the spout fit into a standard unleaded gas tank
Answer:	Either. It has a cap similar to a radiator cap I use it for a gas tank in a boat

Product features

Life Can Be Complicated, Your Gas Can Shouldn't Be

You expect certain DIY projects to be challenging, that's part of the fun (or what you think will be fun before you start). But you don't expect getting fuel out of your Gas Can to be the hardest part of your day. If you read the reviews on most Gas Cans sold today, that's exactly what's happening. The GarageBOSS Press 'N Pour Gas Can proves that you can make a reliable, compliant fuel container that's actually easy-to use. The simple press button operation and precision flow control make filling your machines easier and reduces the chances to overfill or spill. Available in 1+ Gallon, 2+ Gallon and 5 Gallon sizes.

Simple Press Button Pour

Simply press the button forward and down to start the flow of fuel. No anchoring, twisting or pushing on the can. When your machine is filled, simply release the button.

Precise Flow Control

Most machines found in the average Garage or Shed have limited fuel capacity and can be easy to overfill. The Press 'N Pour lets you to control the flow of fuel to prevent spills. The translucent spout extension allows you to see the fluid entering the opening.

Fast Flow

For larger machines, the Press 'N Pour gives you a fast flow rate to empty the can quickly. For the fastest flow rate, simply unscrew the spout extension.

Dust Cap Holder

'Where did I put the Dust Cap?' No more lost dust caps, simply place the cap on the holder on the spout housing to always keep it in reach and in sight.

Product description

No more excuses for a sore back after a hard day's work bent over, balancing a gas can spout over the tank to refill your mower or tractor. The SureCan gasoline container makes it a breeze to fill up your machines with its rotating pouring nozzle and easy grip handles. This 5-gallon SureCan gasoline container is also equipped with a thumb trigger to help you pour just the right amount with less mess. There will be no more having to worry about a rusty jerry can in your garage leaking; with 6 individual layers of plastic, this can is built to last. Seal off all fumes with an airtight design that is childproof and can withstand extreme temperatures. Can is EPA, CARB, and DOT certified. With old gas cans, you sure can't rely on them to keep your liquids safe, but with this new 5-gallon container, you SureCan.

• SELF-VENTING: Self-venting with a flexible spout that rotates to fit into any machine that needs filling
• EASY POUR: Thumb trigger makes for easy, controlled, no spill pouring
• HASSLE FREE: Hand grips on the top and bottom make for less hassle when filling your machine
• CHILD PROOF: Child proof cap keeps curious little ones safe
• HEAVY DUTY: Built to last with 6 individual layers of plastic and tested for up to 60 PSI in high heat and for -40 degrees Fahrenheit (EPA, CARB, and DOT certified)

User questions & answers

Question:	Does it have a screen at the base of the hose
Answer:	I am not aware of any flow enhancement device for this unit. This unit uses a gravity/siphon type system. I use it to transfer gasoline from the dock to a boat tank which is always located lower than the Duramax. Sure beats lugging 5 gallon cans of gasoline down to the dock and is a lot lessmessy when doing the actual transfer.
Question:	What is the warranty on this item
Answer:	Not at all! I drove over 3000 miles with it and it did not leak one drop. I even off roaded with it, it is very durable and well worth the money! It almost gave me a full tank and I have a 2011 crew cab Toyota Tundra
Question:	Is the spout flexible as it looks? Also is it leak proof where the spout comes out on the bottom of the can
Answer:	Siphoning gas from almost all modern cars is practically impossible since they are equipped with an anti-siphon screen in the fuel filler pipe. You can't get the hose into the gas tank at all.
Question:	Does is it come filled with gas
Answer:	Best way: Fill the unit with gasoline and position it above the machine being refilled (for example, my front walkway is three steps above my driveway so I pull the unit up to the top of the three steps and position the machine being refilled on the driveway). Connect the hose to the unit, open the valves and start refilling the tank by pumping the handle until gas begins to flow. Hold the handle open until the tank is filled, then release the handle to stop the flow.Second best way (when you cannot position the unit above the tank being filled): Attach the hose to the unit, open the valves and pump the handle continuously to fill the tank. When the tank is filled, stop pumping and release the handle.

Product description

Durable galvanized steel Type II AccuFlow safety cans offer the most convenient, safest way to store and dispense flammable liquids. Built to meet OSHA and NFPA 30, they have been independently fire tested and approved by FM, and UL. Flexible metal hose is 9 in x 1 in(229 x 25) long to reach small openings. U.S.A. Tank Size 5 Gallon

• Color coding avoids accidents
• Stainless steel flame arrester prevents flashback ignition
• Easy-to-use Safe-Squeeze trigger for controlled pouring
• Two-openings; one for targeted pouring, one with ergonomically designed lift-lever for easy filling
• Approved by FM, UL/ULC, and TUV; also meets OSHA and NFPA requirements

User questions & answers

Question:	Is the can marked (preferably by embossment) to indicate the "5 gallon" level
Answer:	As far as I know there are no marks. The opening is tight so you really can't see inside anyway. There's a screen to prevent anything but gas from entering. I've never specifically measured but if you go to the gas station and put in exactly 5 gallons my guess is the gas will just reach the bottom of the screen which reaches down about 3 or 4 inches and that can be your mark
Question:	Where is this made
Answer:	All Justrite safety cans are produced in our Mattoon, Illinois manufacturing facility.
Question:	Is the 1" nozzle too large to dispense gasoline directly into an automobile? Or is it sized only to fit the larger opening on diesel cars/trucks
Answer:	A standard unleaded gasoline nozzle is only 13/16". If the spout is anywhere near 1 inch, it will NOT fit into the hole to open the flapper.
Question:	Does this can self vent when not pouring? I am looking for a gas can that can handle changes in altitude. It is hard to find 100% gas where I need it
Answer:	This can has a sealed lid with automatic positive-pressure relief that vents between 3 and 5 psig (0.2 and 0.35 bar) to protect against explosion.

Product features

Exclusive Safe-Squeeze Trigger Handle

Safe-Squeeze trigger handle provides the fastest, smoothest, most controlled pouring of any Type II Safety Can.

100% Steel Body

Constructed of 24-gauge galvanized steel finished in an tough powdered paint that resists solvents and stands up to tough jobs.

Flexible 9-inch Hose

A flexible 9-inch hose, offers targeted pouring into small openings while providing a ground path to prevent static sparks when a grounding wire is used.

Safely Store Fuel

Meets OSHA and NFPA Code requirements. UL & ULC listed and FM approved.

Product description

20 Liter Jerry Can system includes spout and spout adapter. All of our Wavian Jerry Can systems come with an EPA, DOT, C. A. R. B. approved spout. We have also added an adapter since some gasoline powered vehicles need a smaller spout to fit in the filler. The adapter sits on the spout and needs to be turned clockwise until it snaps into place. The spout needs to be pushed to start the flow. The weight of the gasoline helps to open the spout to facilitate an easy quick pour. All Wavian products have a 2 year warranty against manufacturers defects. Fully paint-coated inside and outside. Have a full, internal breather pipe for splash-proof pouring. The highest quality Jerry can out there. Original Mil Spec. DOT, EPA and CARB approved. Comes with a safety spout attached and also has an adapter for vehicles with smaller filler receivers. Manufactured from 0. 9mm Cold Rolled Steel ( DC 04 EN 10130). Dual pan construction. Unique wide channel breather for better smoother pouring. Seam welded for extra strength. Three Handle Configuration. Leak-proof Bayonet Closure. Locking pin in cap. Strengthened hinge on cap to prevent accidental bending when closing. Cap designed to hold open when discharging the can. Lined inside with fuel resistant Rezol enamel to prevent rusting. Painted exterior epoxy polyester powder coat. Manufactured and tested to comply with the following standards: DOT, EPA , C. A. R. B. , DIN 7274 and BAM - GGR001. Australian Standard - AS 2906. German Standard-TUV/GS. Swedish Standard-SP. UN-Dangerous goods approval.

• The Only Military Grade Rust Proof Steel EPA and CARB Compliant Jerry Can on the Market
• Highest spec steel jerry can in the world
• Bayonet style quick release nozzle
• Legal for sale in all of North America
• Made in Europe

User questions & answers

Question:	Does it come with cap and spout
Answer:	I didn’t have a spill problem but it did leak while pouring. I have a 5 gallon can and it was hard to hold the release button and tip the can to pour the gas. Probably be easier to use with a 2.5 gallon or smaller can. They need to have another handle on the side opposite the pouring spout. I wouldn’t purchase another 5 gallon can unless they add a second handle.
Question:	Although I see that it is legal for California, I'm still having trouble putting the order through due to shipping restriction. Please advise
Answer:	Most difficult design ever. Super stiff spring, super stiff button. Horrible to hold down while you wait for the cam to empty. Push the button forward then down then hold. I can’t even do it with one hand. It takes two hands just to get the button down! Then I can hold the button down with one thumb. But I is stiff, gets my thumb super sore after a while. All in the name of safety.....
Question:	What's the difference between this can and the other cans being sold in sets of 4 for the same price
Answer:	It says.. assembled in USA, with imported AND USA parts. Hope that is specific.
Question:	Do these Wavian cans seal well enough to carry them on their sides; e.g.; on a roof basket? My old military Jerry cans did
Answer:	Yes. But... The white spout part is relatively short and there is no handle on the rear. When you tip the can up the button that youre supposed to press cant be reached as its probably up against the body of the car. You'll be balancing this can on one hand and trying to work the safety valve with the other, if you can do that with the weight of a full tank, then good for you for being in good shape.

Product description

Keeping your garage, shop, or shed organized helps you find what you need to get the job done quickly. With the VP Racing Fuels 2-Jug Storage Rack, you'll find your utility jugs, gas cans, watering cans, or other yard work containers easily. This bottomless utility jug holder holds up to 2 containers. You can fit 2 VP Racing Motorsports 5-gallon containers or similar-sized storage containers in this utility jug holder. This garage storage rack can hold either the square or round Motorsports containers. Overall, this utility jug holder measures approximately 23 inches long, 11.5 inches wide, and 10 inches tall. Easily mount the watering/gas can storage rack to your garage, shop, or shed wall. This garage storage solution comes with pre-drilled holes so you can easily install. Screws and mounting hardware are sold separately. Trust this garage storage rack to last. It's made of sturdy and lightweight aluminum that stands up to dings and scuffs. You'll appreciate the professional look of the stenciled and cut-out VP Racing logo on the front. Organize your gardening tools with this VP Racing Fuels 2-Jug Storage Rack.

• ORGANIZE: Keep your utility jugs, gas cans, watering cans, or other containers neatly stored with this 2-jug bottomless storage rack
• HOLDS 2 JUGS: Fits 2 VP Racing Motorsports 5-gallon containers or other similar-sized storage containers
• WALL MOUNTABLE: Easily mount to your garage, shop, or shed wall with its pre-drilled holes (screws and mounting hardware not included)
• STURDY: Made of sturdy aluminum with the VP Racing logo cut-out on the front
• DIMENSIONS (L x W x H): 23 x 11.5 x 10 inches

User questions & answers

Question:	Is this rack strong enough to hold 2 gas mounted on the wall in a enclosed trailer? Of course it would be screw into 1x1 inch metal wall studs
Answer:	Yes, it's filled to the top with a gas composed of O2N2CO2 and other trace elements. Sometimes called "air."

Product description

Galvanized Type I cans meet OSHA (Occupational Health and Safety Administration) and NFPA (National Fire Protection Association) Code 30 requirements and are UL (Underwriters Laboratories) and ULC (Underwriters Laboratories of Canada) listed and FM approved for safe handling and storage of gasoline and other flammable liquids. Features Lead Free Technology, constructed of 24-gauge hot dipped galvanized steel. Patented Comfort-grip trigger release, spring closing lid with neoprene gasket vents a 5 psi (pounds per square inch) internal pressure. Non-sparking brass flame arrestor and pour spout. Deep drawn construction means no top or side beams. Baked on powder-coat finish. Trilingual label. Safety can spout, Model No. F-15 (SKU 571811) may be purchased separately. Galvanized Type I cans meet OSHA (Occupational Health and Safety Administration). This product is manufactured in United States. This product meets customer requirement.

From the Manufacturer

Eagle 5 Gallon Red Safety Gasoline Can meets OSHA and NFPA Code 30 requirements and are UL and ULC listed and are FM Factory Mutual approved for the safe handling and storage of gasoline and other flammable liquids. Eagle cans feature Lead Free Technology, constructed of 24-gauge hot dipped Galvanized steel, deep drawn one piece seamless body construction, non sparking brass integral pour spout, with a spring closing lid with neoprene gasket which vents at 3-5 psi internal pressure. The can features a fixed handle and patented comfort grip trigger release for easy dispensing, a double interlock no-weld bottom seam, 100% Leak tested, and a baked on red powder coat finish. Eagle cans are made in the USA, by USA workers and with USA quality. Family owned business making quality products since 1894 in Wellsburg, West Virginia

• This product adds a great value
• Product is highly durable and very easy to use
• This product is manufactured in the USA
• 5 gallon gasoline Safety can with poly yellow funnel
• 100% leak tested, UL and ULC listed and FM Approved
• Has flame arrestor screen
• Patented comfort grip Trigger release with spring closing lid and fixed Handle
• Red baked on powder coat finish over lead free galvanized steel construction

User questions & answers

Question:	What is the mechanism like that opens the Eagle UI-50 safety can for filling / pouring? (Cannot tell from the pic or description
Answer:	You can see a better picture here...http://www.toolfetch.com/type-i-safety-cans-ui-50fseg.shtml?gclid=CJ6w2Lab3rMCFexAMgod1VUAGwUse the mouse-over zoom feature.The teapot analogy is spot-on. The top is HEAVY spring loaded to close. Pulling the top's handle to the can's handle opens the spout. Much like a lawnmower safety lever. They must be engaged with each other to open the lid.I got sick of my plastic can's o-rings leaking all the time, and this solved that issue.The only CON - is you must remove the funnel every time you fill the can.
Question:	Has anyone else had an issue with gas "flying" out of can when opening after carrying it? It seems to pressurize, and when you pull on handle, look ou
Answer:	Mine presurizes too. When the pressure equalizes when you open it, you can hear it. However, I am not concerned becuase it has a flame arrestor on it and no fuel spits out.
Question:	With the funnel attached, I dont have much ability to tilt the can up very high, so I can only pour ~1/2 of the volume into my car tank. Help! Thanks
Answer:	You can do it: once it's as empty as you can get it with the conventional pouring angle, SLOWLY rotate the can without removing the funnel from your car's gas tank. It will reposition the can and the rest of the gas will flow out. You just slowly rotate it 180 degrees (in a circular motion looking from the sky down...like clockwise). I don't know if that is how it's designed but it works.
Question:	Does the Eagle UI-50 safety can funnel snap on and off easily to facilitate storage, or is it intended to stay in place
Answer:	The safety funnel pops off relatively easily for storage. It is a touch more snug at first use, but after putting it on and taking it off several times it becomes a bit smoother. Once you do it one or two times you will get the hang of it.

Product features

Easy To Use

User friendly design allows you to easily remove the funnel to fill the can.

Steel Construction

Nearly seamless 24-gauge hot dipped galvanized steel construction provides excellent durability and a long service life.

Resilient

Holds up to temperature changes. It will not swell or shrink.

Safe Fuel Storage

Use our Eagle Type I safety can to safely store your fuel. Meets OSHA & NFPA code requirements. UL, ULC & FM approved.

Product description

30 gallon gas caddy is perfect for storing fuel for automobiles, gas powered lawn and garden tools, motorcycles/ATVs and much more. The large capacity tank allows you to store up to 30 gallons of fuel and is easily transported with the built-in solid wheels. This caddy is safe for storing gasoline, diesel, kerosene and even bio diesel. Simply turn the hand pump forward or reverse for dispensing or siphoning fuel. The 8 foot hose with fill neck easily fits in any gas tank.

Features:

No matter what you are refueling, this unit is designed to handle the job. The versatile caddy is approved to safely store and dispense up to 30 gallons of gasoline, diesel, kerosene or bio-diesel fuels.

Heavy duty steel construction high durable and provides years of reliable service.

2 Way rotary pump easy to use reversible rotary pump fills and siphons by simply reversing the cranking action.

Visual level gauge an accurate, easy-to-read fill gauge lets you quickly determine your fuel level at a glance.

Heavy-duty steel handle makes up the rugged push/pull handle, which is conveniently angled, offering the leverage and control you need.

Anti-Static ground clamp safety discharge clamp ensure the item being filled is grounded to prevent accidental static discharges.

Durable 8ft Kink-Free hose ensures maximum flow while making fill ups fast and convenient.

Convenient Solid Wheels makes transport easy and convenient.



Specifications:

Maximum Capacity: 30 Gallons

Rotary Pump: Hand Crank/Manual

Hose Size: 8 Feet

Vented: Yes

Overall Dimension: 22.84"(W) x 21.66"(L) x 46.46"(H)



Package Includes:

30 Gallon Gas Caddy

Reversible Rotary Hand Pump

8 Foot Kink Proof Siphon/Discharge Hose w/ Fill Neck

Easy-To-Read Vent/Fuel Level Gauge

Solid Tires With Steel Rim

Pre-installed Fill Neck with Gas Cap

• 【2 Way Rotary Pump】 Easy to use reversible rotary pump fills and siphons by simply reversing the cranking action
• 【Multi-Purpose Use】 No matter what you're refueling, this unit is designed to handle the job. The versatile caddy is approved to safely store and dispense up to 30 gallons of gasoline, diesel, kerosene or biodiesel fuels
• 【High Capacity Tank】 30 gallon gas capacity stores enough fuel for multiple vehicles
• 【Easy to Fill】 The easily accessible, wide diameter fill neck provides a larger opening for safer, faster refills with less spilling and less waste of expensive fuel
• 【Durable 8ft Kink-Free Hose】Kink-free hose ensures maximum flow while making fill ups fast and convenient., Tank Dimension: 15" x 15" x 31-1/2", Overall Dimension: 22.84"(W) x 21.66"(L) x 46.46"(H)

User questions & answers

Question:	If this is kept in a garage will it emit much fumes
Answer:	Yes they seal very well. I have carried them on the interior of my vehicle for several days with no fumes whatsoever.
Question:	Could I use it for Lube oil
Answer:	No screen at the base of the hose.
Question:	Are these made in the USA
Answer:	Great warranty fast service 12 hrs or less. No hassles
Question:	Replacement rotary pump
Answer:	I have two cans and there is no leakage where the spout connects to the container body. The only thing you have to be aware of is that you need to pay attention to the fill since once you release the leaver gas is still in the spout and can over fill if not careful. Hose is flexible.

Product features

EASY TO FILL

Easy to use reversible rotary pump fills and siphons by simply reversing the cranking action. The easily accessible, wide diameter fill neck provides a larger opening for safer, faster refills with less spilling and less waste of expensive fuel.

VISUAL LEVEL GAUGE

An accurate, easy-to-read fill gauge lets you quickly determine your fuel level at a glance. Makes transportation easy.Store up to 30 gallons fuel.

HEAVY DUTY FLAT FREE TIRE

Come with the heavy duty flat free tire. The Tire thickness is 2in and tire diameter is 9.5in. Kink-free hose ensures maximum flow while making fill ups fast and convenient.Suitable for normal car tanks.

ANTI-STATIC GROUND CLAMP

Safety discharge clamp ensure the item being filled is grounded to prevent accidental static discharges. Wide opened fill inlet ensures safer, faster refills of the fuel tank.

• Premium Material: Universal gas can vent cap is made of premium stainless steel and premium rubber, rustproof and durable.
• Leak Proof Design: Gas can replacement vent cap is designed with screw caps and double rubber sealing rings that can ensure leak proof.
• Vent Cap: Fuel can air vent caps can be used for all kinds of 3 or 5 gallon gas can or other plastic gas or water can, provide a vent and make the fuel or water pour out quickly and smoothly.
• Easy Operation: Simple to install the valve stem and rubber sealing ring onto the can via a wire after drilling a hole through the can, then screw on the dust cap finished.(It's better to drill a hole on high and back of the can, avoiding the handle because it's thicker.)
• Packing List: The package will come with 6 pieces gas can vent caps, 1 piece drill, 1 piece wire,1 piece wrench and 6 pieces stickers.

User questions & answers

Question:	Do these help with Bloat? These new gas cans seem to seal so much that they balloon up and with enough time stay that way
Answer:	It’s aluminum so yeah but it doesn’t have a bottom, so you would have to build out a base for it. I was disappointed when I got it that it doesn’t have a bottom. The weight of the gas cans will be supported by whatever you have then sit on... for me it’s my trailer. Hope that helps
Question:	Will these vent caps work with 4-gallon rotopax container which have quite thick walls
Answer:	Yes, The cap is attached and the spout is furnished. An excellent product!
Question:	can i leave thecap on but loose for storage to prevent bloating and can it be used on a metal jerry can
Answer:	I have no control over Amazon.com; they control the listings. I receive many orders from California on other NATO can listings; you should try one of these other listings. Try https://www.amazon.com/dp/B071GRY1HW. Jerry - The Gear Guy
Question:	do regular caps that go on tire valve stems work if the cap that comes with it is lost? like is it the same thread pitch and size as the valve cap
Answer:	the quality of the cans is the difference. Then Wavian is military grade rust proof steel. It is safe and you will have it forever.