13 best blitz gas cans

Product description

Made of durable HDPE with barrier materials to virtually eliminate hydrocarbon emissions. Holds 5 gallons (20 liters) of gas and oil mixes and exceeds California Air Resource Board (CARB) and EPA requirements for portable fuel containers. This can is designed with two handles for easier use and handling. In addition this can is built with a wider base and lower center of gravity to reduce the chance of a can tipping over and if it does, the spouts close automatically with an airtight seal.

• Durable HDPE
• Virtually eliminates hydrocarbon emissions
• Exceeds California Air Resource Board (CARB) and EPA requirements for portable fuel containers
• Holds 5 gallons of gas and oil mixes
• Two handles for easier use and handling

User questions & answers

Question:	Will it ship to ca
Answer:	When I bought mine it came with a reducer for 1/2 inch arbor, which my bench grinder has, It was some time ago, but I think any reliable company would include one ( a cheap piece of plastic).
Question:	Can they hold diesel
Answer:	No.
Question:	How does this gas can "breathe" while you're pouring
Answer:	yes, it has plastic rings inside the arbor hole to adapt it down.
Question:	Is there a way to remove the spring that prevents fumes from escaping, but still keeps gas from spilling out
Answer:	not sure what grinder i have but i use to have a rough wheel . this one helped but my grinder was still shaking. i bolted it down to my bench.

Product description

MADE IN THE USA 

Why purchase our gas can spouts?

This bundle includes all that you need! 4 Blitz Spout Nozzles, 4 Rings, 4 Vents and 4 Gas Can Caps. These direct replacement were designed to replace a broken or missing spout for your Blitz fuel can!

The perfect solution to your problem! Those No Spill EPA Safety spouts are too temperamental when all you want to do is fill up your mower!

WHAT WILL THESE FIT?

Nozzles that have the numbers 900092, 900094, and 900302. So that means it may fit Kolpin and Rotopax if they use the same spout numbers. *These will not fit on the Blitz Gas Cans with the clear flexible spout as they have a different thread size.*

Included in this listing is:

• 4 Blitz Spouts
• 4 Blitz Rings
• 4 Yellow Gas Can Caps
• 4 Yellow Vents

For customers wanting to easily install their vent on their gas can, drill a 1/2 inch hole and push the vent in (it should pop into place).

We offer a money back guarantee if you don't enjoy the performance of your replacement gas can spouts!

Add to your cart now!

• MODEL/BRAND SPECIFIC FIT - These Gas Can Spouts are made to replace the no spill spouts.
• NO MORE LEAKS - Our spouts are made of high quality plastic, which means you can replace the old style gas can spouts for ours and not have to worry!
• NOT UNIVERSAL DESIGN - Made to fit the Blitz fuel containers that came with the hard black plastic spout only.
• ALL YOU NEED - Included in this set is 4 gas can spouts, 4 rings, 4 caps, and 4 vents!
• NO MORE HASSLE - Return your USA MADE gas spouts in the condition they arrived in for your money back :)

User questions & answers

Question:	What are the smaller caps that came with order for? How do you use them and where
Answer:	Those are the vent caps. drill a small hole in the opposite of the spout, high near the handle, then insert the smaller yellow caps. That will allow optimum flow will pouring fuel.
Question:	Will this fit Blitz 5 gallon gas can
Answer:	Yes- also a better replacement
Question:	Will this fit a blitz 5cxg can that has an original spout
Answer:	i have had no prob. with any of the spouts i have ordered they should fit a blits can . P.
Question:	What is the outer diameter of the wide end of the black plastic spout? yes, the outside diameter of the lip around the "bottom" end of the spout
Answer:	1.604 in then there is a step down to 1.475 that fits on the outer edge of the outlet on tn the gas can and 1.145 over the inner of the can outlet..

Product description

Made of durable HDPE with barrier materials to virtually eliminate hydrocarbon emissions. Holds 5 gallon, (20 liters), of your gas and oil mixes and exceeds California Air Resource Board (CARB) and EPA requirements for portable fuel containers. The 5600 was designed with two handles for easier use and handling. In addition, this can was built with a wider base and lower center of gravity to reduce the chance of a can tipping over and if it does; our spouts close automatically with an airtight seal.

• Spill Proof Spout
• Two Handles
• Durable HDPE Plastic
• Exceeds CARB and EPA requirements
• Shipping included in price!!

User questions & answers

Question:	Will it smell up my car
Answer:	no sorry I never have never tried the unit is light put with piles of mail in it it can get quite heavy it holds a lot
Question:	its it me or is it cheaper to buy them seperate
Answer:	I would say they wouldn't work great over a door. The metal lattice-like wires cover up to the top of the frame, so you couldn't hang it over a door unless you have really small hooks that will fit through the lattice. Mine are not flush to the wall when screwed in, so hanging them over a door would likely mean they will hit the door and swing around whenever the door is moved. Also causing the metal to scratch the door. Unless you screwed them into the door just as you would on a wall.
Question:	Is there a screen inside these gas cans
Answer:	The baskets are 10 inches wide by 9.5 inches high. At the top of each basket they extend 3.5 inches from the wall. At the bottom of each basket, it is about 2.25 inches from the wall.
Question:	I assume these can contain diesel
Answer:	They only fit vertically.

Product description

Our Gas can replacement spouts are built to update your old style Chilton, Blitz, Rubbermaid, Essence, Gott, Kolpin, Rotopax, Scepter, Midwest, Briggs and Stratton Cans. No more "No Spill" spouts that are supposed to be environmentally friendly. With our easy pour spouts, you don't have to waste any more gas by trying to pour it into your mower or vehicle! This spout is guaranteed to work for life and made with prime quality material. The replacement gas and kerosene spouts will fit on 1 Gallon, 2 Gallon, 2.5 Gallon, 5 Gallon cans, and more!

Included in this listing is:

• 2x Semi Flexible Spouts

• 4x Rings (two coarse, two fine thread)

• 2x Rubber Gasket

• 2x Stopper Cap
• 2x Vents (If your gas can doesn't have a vent)
• 2x Screw caps for Vents (For gas cans with built in vents) 

For customers wanting to install their vent on their gas can, drill a hole that is 1/2 inch in diameter and push the vent in (it should pop into place). Easy installation!

We offer a money back guarantee if you don't enjoy the performance of your replacement gas can spouts!

Add to cart now!

• NO MORE LEAKS - Our spouts are made of high quality plastic, which means you can replace the old style gas can spouts for ours and not have to worry!
• PERFECT FIT - These Gas Can Spouts are made to replace the no spill spouts. Use these on Blitz, Chilton, Scepter, Surecan, Ameri Can, Midwest, and more!
• EASY FILL UP - With the flex gas spouts, you can now fill up your machine without spilling!
• ALL YOU NEED - Included in this set are 2 gas can spouts, 4 caps (for different gas can threads), 2 vents, 2 stopper gas cap, and 2 gaskets!
• NO MORE HASSLE - Return your gas spouts in the condition they arrived in for your money back.

User questions & answers

Question:	What size necks do they fit
Answer:	didn't fit my cans, my caps are about two in. dia. inside these all fit some what smaller size
Question:	What is the inside diameter of the collar that screws onto the gas can? will it fit a 2-gal can
Answer:	would not fit any gas can i have, my caps were aprox. 2in inside dia, these fit 1" 3/4 .
Question:	What is the black cap with the attached loop for
Answer:	Vent cap
Question:	Has anyone used this on eagle PG-3 gas jug do the threads match
Answer:	Yes, the threads matched

Product description

"MADE IN THE USA" - 2 Blitz Spouts / Nozzles, 2 Rings and 2 Caps Replacement - Designed to replace a broken or missing spout for your Blitz fuel can. Aftermarket, Brand New, Never Used and No Retail Packaging. These spouts only fit on Blitz Self-Venting Spout #'s 900092 900094 900302, part numbers can be found on your spout. Designed to fit the Blitz fuel containers that came with the hard black plastic spout only. If you have the blitz can with a flex clear spout, these will not work as the ring has a different size and thread. Please Note: These may fit on a few other containers like Kolpin & Rotopax and others if they use the above listed spout #'s. Easy to install and use for Fuel, Diesel, Kerosene, Gas and Water! Gas can vents and cans are not included with this listing.” ** FREE SHIPPING to the lower 48 states (+ Alaska, Hawaii, Guam & PR) – Ships in 24 hours or less and will arrive within 2 to 5 days, depending on your location** We will ship international, buyer pays all shipping costs! Vent installation instructions provided on the back of the packing slip!

• TWO - Blitz Spouts / Nozzles / Rings & 2 Caps
• Designed to fit the Blitz fuel containers that came with the hard black plastic spout only. If you have the blitz can with a flex clear spout, these will not work as the ring is a different OD size and thread, but "may" also fit Kolpin, Rotopax, Scepter and others if the spout numbers are the same as Blitz
• Made in the USA
• All orders shipped the same day!

User questions & answers

Question:	My 5gal. cans are blitz model 11833. Threads are finer than on my scepter cans. Will they fit
Answer:	I took the new spout and used my origanial screw nut . The new one was a little small for my can.. so i just swaped the nuts out and ready to go. Hope this helps. I love mine no leaks and with the end cap i leave little lose when in storage so can does not swell up.
Question:	are gaskets included
Answer:	short answer NO. just got mine today and NO gaskets. We will see how that works..
Question:	will this fit Blitz 5 gallon model# 5CXG can
Answer:	I have several different sized Blitz gas cans. The all have the same thread. Even the ones with the valve spout .My valve broke and I replaced it with this style spout. They all work great. And it saves a well made can, too,
Question:	Will these fit a Blitz model 50810 gas can? I don't have the old spout to get the number
Answer:	I have Blitz models 50805 (1Gal), 50833 (2.5Gal), 11810 (5Gal), 5CXG (5Gal) This spout fits all of them. I would expect it to work on the model 50810 also.

Product description

MADE IN THE USA 

Why purchase our gas can spouts?

This bundle includes all that you need! 3 Blitz Spout Nozzles, 3 Rings, 3 Vents and 3 Caps. These direct replacement were designed to replace a broken or missing spout for your Blitz fuel can!

The perfect solution to your problem! Those No Spill EPA Safety spouts are too temperamental when all you want to do is fill up your mower!

What will these fit on?

Nozzles that have the numbers 900092, 900094, and 900302. So that means it may fit Kolpin and Rotopax if they use the same spout numbers. *These will not fit on the Blitz Gas Cans with the clear flexible spout as they have a different thread size.*

Included in this listing is:

• 3 Blitz Spouts
• 3 Blitz Rings
• 3 Yellow Gas Caps
• 3 Yellow Vents

For customers wanting to easily install their vent on their gas can, drill a 1/2 inch hole and push the vent in (it should pop into place).

We offer a money back guarantee if you don't enjoy the performance of your replacement gas can spouts!

Add to your cart now!

• NO MORE LEAKS - Our spouts are made of high quality plastic, which means you can replace the old style gas can spouts for ours and not have to worry!
• PERFECT FIT - These Gas Can Spouts are made to replace the no spill spouts.
• DESIGN - Made to fit the Blitz fuel containers that came with the hard black plastic spout only.
• ALL YOU NEED - Included in this set is 3 gas can spouts, 3 rings, 3 caps, and 3 vents!
• NO MORE HASSLE - Return your USA MADE gas spouts in the condition they arrived in for your money back :)

• EZ-POUR Replacement Spout and Vent Kit Let's you Update Old Cans
• Easy Flow Action With Superior Manufacturing That Won't Break Down Or Spill
• Includes Spout, Cap, Replacement Vent, Secondary Base Cap, And Flame Arrestor

User questions & answers

Question:	Will this fit and work with 1.25 Gal Scepter ventless gas can? Is it self venting
Answer:	Not sure on the can sizing. Fits a standard red or yellow plastic gas can. The spout is not self venting. You will need to install the venting kit attachment to your can for it to vent.
Question:	Will this fit my old 5 gallon stancan? the threads in the stancan are thicker than the threads in my two and a half gallon gott gas can
Answer:	Yes, It would use either the Yellow or a gray base cap available from our website. If your Stan can is Metal you would need our A3 Metal can adapter.
Question:	Will this spout fit an Eagalmetal can 2 1/2 gal
Answer:	Hi- you would also need our A3 metal can adapter to use this spout on an Eagle Metal Can
Question:	Will this fit a chilton 5 gal. plastic can. inside id of 1 3/4" od of
Answer:	For Chilton cans you will also need to purchase a Chilton Adapter part #A1. This is in the Product description. This spout fits my gas can with an inside id of 1 3/8 od of 1 1/2., so you will need the grey #A1 ADAPTER

Product features

Standard Replacement Spout & Vent Kit

Features:

Flexible and versatile replacement spout designed to fit most gas cans or water jugs.

Use with:

Lawnmower, generator, string trimmer, everyday vehicles and gas tanks that have a smaller opening, and more!

Kit includes:

Spout, spout cap, tether, 1/2” replacement push-in vent, filter screen/flame arrester, yellow and black base caps.

HI-FLO Replacement Spout & Vent Kit

Features:

Large 7/8" opening. Flexible nozzle designed to empty a five-gallon gas can in as little as 35 seconds. Fits most gas cans and water jugs.

Use with:

Boats, ATVs, farming equipment, diesel trucks, and gas tanks with wider openings.

Kit includes:

Spout, spout cap, tether, 8″ spout extension for those hard-to-reach tanks, 1/2” replacement push-in vent, filter screen/flame arrestor, yellow and black base caps.

HI-FLO Replacement Spout with Reducer Tip

Features:

Produces the same results as a HI-FLO Replacement Spout & Vent Kit, with an included unleaded reducer tip. Designed to fit most gas cans and water jugs.

Use with:

Everyday vehicles and gas tanks that have a smaller opening.

Kit includes:

Spout, spout cap, tether, reducer tip, 1/2” replacement push-in vent, filter screen/flame arrestor, yellow and black base caps.

Rigid Replacement Spout & Vent Kit

Features:

Short and rigid spout designed to fit most gas cans and water jugs.

Use with:

Vehicles that utilize a capless fuel system, and small, one-gallon containers that are used for weed eaters, chainsaws, and other pieces of handheld equipment.

Kit includes:

Spout, spout cap, 1/2” replacement push-in vent, filter screen/flame arrestor, yellow and black base caps.

Black Base Cap

The black base cap comes with your spout kit and has a fine thread, which makes it suitable for the following cans: Blitz (gas, kerosene, and diesel), Briggs & Stratton (early models), Essence, Gott, and Rubbermaid.

Yellow Base Cap

The yellow base cap comes with your spout kit and has a coarse thread, which makes it suitable for the following cans: Blitz, Briggs & Stratton (later models), Eagle, Igloo, Midwest Can (gas, water, diesel), Scepter, and Stancan (metal)

Gray Base Cap

The gray base cap must be acquired separately from your spout kit and has a coarse thread, which makes it suitable for the following cans: Briggs & Stratton (later models), Midwest Can (metal jerry can), Stancan, Tee Pee, and Wedco.

Product description

JSP Manufacturing® Aftermarket Blitz Yellow Spout Cap - 10 Pack



New Aftermarket Blitz Yellow Spout Cap

Compatible with Blitz Spouts

Top Hat Style

Tight Fit! Excellent replacement spout cap.

Only fits Black Blitz Self-Venting Spouts

Keeps dirt and debris out of your can

Prevents fuel from spilling during transportation

SPOUTS ARE NOT INCLUDED

Easy to Install

Use on your Fuel, Diesel, Kerosene, Gas and Water spouts

Exact item is pictured

Color: Yellow

Quantity: 10 Pack

Made in USA!



Replaces the following Part Numbers:

Fits ONLY these Part #:



900092

900094

900302



Note: The part # can be located on your existing spout, please verify the part # matches one of these!



Brand: JSP Manufacturing

MPN: GV-Spout-Cap-10pk



Measures Approximately: (See images for dimensions)

Outside Diameter: 1.30 inch

Inside Diameter: .85 inch

Height: .945 inch



Quick & Easy Installation:

1. Line up the arrows

2. Push onto the spout

3. Twist to lock



Aftermarket part fits the following:

Blitz Self-Venting Spouts (ONLY)



Please Note:

1. These may fit on a few other containers spouts like Kolpin & RotopaX, however ONLY if they used that specific style of Self-venting Black spout mentioned above.

2. Please verify your spout matches the picture, as these Caps only fit on that style. (Spout not included).

3. Blitz made several other types of spouts that these caps simply do not fit on.

• New JSP Brand Aftermarket Blitz Yellow Spout Cap ~ Top Hat Style
• Replaces the following Part Numbers: 900092, 900094, 9000302
• Measures Approximately: Outside Diameter: 1.30 inches / Inside Diameter: .85 inch / Height: .945 inch
• Quantity: 10 Pack ~ Keeps dirt and debris out of your can ~ Easy Installation ~ Made in USA!
• Fits Blitz Self-Venting Spouts ONLY ~(SPOUTS ARE NOT INCLUDED)

User questions & answers

Question:	Hi there , Your listing says that these caps twist and lock , I've tried several times and I can't get them to lock
Answer:	They do not twist and lock. They fit under the clip on the spout.
Question:	I have a 2 gallon 8 oz red blitz can. the inside diameter looks to be 1 3/8 to 1 1/2“. these fit? model on can is 2cxg
Answer:	Our inside diameter is 13/16

Product description

GAS CAN NOT INCLUDED.



HERE’S WHAT YOU GET:

- 1 ( One ) Brand New 5gal Jerry Can Blitz Style Metal Flexible Spout w/ Metal Screen including Nitrile Gasket and Spout Cap



- Fits ONLY Blitz or Military issue 5 Gallon GAS Metal Cans manufactured prior to or around 2009.



- Fits into 2 ¼ inch (2.25”) width threaded openings and measures approximately 13 1/2 (13.50") inches Long.



- Brand New Heavy Duty SCREW IN THREAD TYPE Flexible Spout with a metal filter screen at the end, which might be considered a flame arrestor but it’s just a screen that helps to keep dirt and debris from entering your vehicle or equipment and machines fuel tanks.



- Fits unleaded GAS fuel tanks.



NOTE:

This spout will NOT fit the newer NATO Cans that were manufactured from around 2009 to the present. EPA regulations have made manufacturers change the size of their can and the diameter of the hole is slightly larger.



Gas Can, Measuring Tape and Caliper are Not Included.

• FITS ON YOUR BLITZ USMC 5 GALLON METAL GAS CAN: The Flex Jerrycan Spout fits a 2 1/4 width threaded opening and has a 12 1/2 inch Steel Flexible Spout with a filter screen on end.
• WITH FILTER SCREEN: The Filter Screen on end is a great added part to this spout as it helps to keep small debris from entering your vehicle or equipments fuel tank.
• BLITZ VINTAGE STYLE GAS SPOUT: These Replacement Parts are hard to find and considered obsolete due to New Government Regulations. Buy a few to keep on hand to Save your old gas can from the landfill.
• GAS CANS & CALIPER NOT INCLUDED: Please double check your requirements prior to purchase to ensure getting the right part the 1st time. Not all gas can parts are interchangeable between brands. These parts do not fit any other can other than what has been specified above.
• NOTE: This spout will NOT fit the newer NATO Cans that were manufactured from around 2009 to the present. EPA regulations have made manufacturers change the size of their can and the diameter of the hole is slightly larger.

User questions & answers

Question:	is this made in the USA
Answer:	Sorry, don't know! Amazon site should say under details! The ones like that I purchased rusted quickly and a few broke off at can top. Good luck!
Question:	What is the diameter of the screw in part? is it 2 inch NPT thread
Answer:	yes
Question:	where to buy the can this fits...part number? don't just sell stuff and leave usnot knowing
Answer:	Not sure where to buy cans. I purchased 10 can years ago and just needed new spouts! Try google or search off-road items, and possibly survival equipment/gear suppliers. I'm sure someone is making /selling them somewhere.
Question:	Does this spout fit in modern cars with the smaller diameter fill hole
Answer:	Most likely not I'd carry a funnel

• These 4 caps only fit on Blitz Black Self-Venting Spouts with the part numbers 900092 900094 900302, the part number can be located on your existing spout.
• Please check the dimensions carefully as shown in the images. It doesn't fit all Spouts. Only fits few as mentioned. Please purchase if only the dimensions matches.
• Made of Quality Plastic HDPE Material with prime material used.
• EASY INSTALLATION: Easy to install on your fuel, diesel, kerosene, gas and water, just line up the arrows, push onto spout, then twist to lock.
• NO SPOUT OR CALIPER INCLUDED: The purchase includes 4 aftermarket, new caps as shown in the photo and nothing else.

User questions & answers

Question:	Is there threads inside? why did you not cut one in half to show the thread pattern
Answer:	No there are no threads inside. These work in conjunction with the spout and the collar. When the spout is on the outside of the can it will snap on to the end. When the spout is inside of that can it sits on top and is held down by the collar.

Product description

"MADE IN THE USA" - 4 Blitz Spouts / Nozzles, 4 Rings and 4 Caps Replacement - Designed to replace a broken or missing spout for your Blitz fuel can. Aftermarket, Brand New, Never Used and No Retail Packaging. These spouts only fit on Blitz Self-Venting Spout #'s 900092 900094 900302, part numbers can be found on your spout. Designed to fit the Blitz fuel containers that came with the hard black plastic spout only. If you have the blitz can with a flex clear spout, these will not work as the ring has a different size and thread. Please Note: These may fit on a few other containers like Kolpin & Rotopax and others if they use the above listed spout #'s. Easy to install and use for Fuel, Diesel, Kerosene, Gas and Water! Gas can vents and cans are not included with this listing.” ** FREE SHIPPING to the lower 48 states (+ Alaska, Hawaii, Guam & PR) – Ships in 24 hours or less and will arrive within 2 to 5 days, depending on your location** We will ship international, buyer pays all shipping costs! Vent installation instructions provided on the back of the packing slip!

• FOUR - Blitz Spouts / Nozzles / Rings & 4 Caps
• Designed to fit the Blitz fuel containers that came with the hard black plastic spout only. If you have the blitz can with a flex clear spout, these will not work as the ring is a different OD size and thread, but "may" also fit Kolpin, Rotopax, Scepter and others if the spout numbers are the same as Blitz
• Made in the USA
• All orders shipped the same day!

User questions & answers

Question:	How many inches is the lid inside and out
Answer:	Don't know the exact measurement of the spouts as I am away from home on travel. The spouts do fit my 5 gallon Blitz fuel cans perfectly. The rings and caps (to vent) require a 1/2 inch drilled hole diameter.
Question:	What is the inside diameter cap? Not the spout
Answer:	The cap and ring (vent) requires a 1/2 inch hole to mount in the fuel can.

Product description

Replacement spout by EZ-POUR allows you to update your trusty old cans with a brand new spout. With dependable construction and easy to understand parts and instructions, you won't have to update your EZ-POUR spout anytime soon. This can be used on cans and water jugs of all varieties. This set includes Spout, Cap, Secondary Cap, Replacement Vent, Secondary Base Cap, And Flame Arrester.

• EZ-POUR Replacement Spout and Vent Kit Let's you Update Old Cans
• Easy Flow Action With Superior Manufacturing That Won't Break Down Or Spill
• Includes Spout, Cap, Secondary Cap, Replacement Vent, Secondary Base Cap, And Flame Arrester
• Water Jug Spout That Works On Cans Of All Varieties

User questions & answers

Question:	Will this fit a Clinton P20 - 2 gallon can
Answer:	The Chilton threads are larger than those on Blitz cans and others. I have both types of cans. Most of the replacement spouts available fit the smaller diameter openings. There is a Chilton can adapter for sale here on Amazon. It is basically a reducing coupler to go from Chilton standard to the smaller threads. The KOOL products come with one black fine thread cap, and one yellow coarse thread cap, so with the adapter and a Kool replacement spout, you should be good! https://smile.amazon.com/dp/B00NB3TRTS?aaxitk=JkD5d4Jzr150th32HmBXWw&pd_rd_i=B00NB3TRTS&pf_rd_p=44fc3e0f-4b9e-4ed8-b33b-363a7257163d&hsa_cr_id=3073654650001&sb-ci-n=asinImage&sb-ci-v=https%3A%2F%2Fimages-na.ssl-images-amazon.com%2Fimages%2FI%2F31Ff3JuKonL.jpg&sb-ci-a=B00NB3TRTS
Question:	Can I drill a hole to add the Replacement Vent to a plastic container that currently does not have the vent
Answer:	I just installed this add-on vent to the Blitz Midwest gas can. The instructions recommends a "step drill bit". I started by drilling a 1/8" pilot hole, as I was drilling into the mold seam. Once that was drilled, I used my step drill bit to drill to 1/2", stopping just short of 1/2" so I'd have a VERY tight fit. I forced vent cap in, using a socket to keep the pressure centered. I should note here, that you want to have the cap position as you want it, as once it's seated, it will be near impossible to turn! The vent cap fit was perfect & completely air tight! :)
Question:	Will this cap fit a 5 gallon gas can" One of the new type with the leaky useless hard to open spout
Answer:	I've used the spouts on new 2 gallon plastic gas containers to replace the spring loaded self-sealing spout. I've also used one on a 6 gallon water jug. I would say, "yes"...
Question:	Does the spout fit into an automobile gas tank filler
Answer:	I have to assume you are referring to a gas can. I have used it on several plastic gas cans without a problem. It comes with two separate screw-on rings to fit most cans either water or gas. The spout will fit into the gas tank filler on a vehical. You want to get the larger spout for filling your riding mower. The larger diameter spout means the gas flows more quickly and you are holding 5 gallons of gas at an odd angle for moments instead of minutes.

Product description

JSP Manufacturing® Aftermarket Blitz Yellow Spout Cap - 2 Pack



New Aftermarket Blitz Yellow Spout Cap

Compatible with Blitz Spouts

Top Hat Style

Tight Fit! Excellent replacement spout cap.

Only fits Black Blitz Self-Venting Spouts

Keeps dirt and debris out of your can

Prevents fuel from spilling during transportation

SPOUTS ARE NOT INCLUDED

Easy to Install

Use on your Fuel, Diesel, Kerosene, Gas and Water spouts

Exact item is pictured

Color: Yellow

Quantity: 2 Pack

Made in USA!



Replaces the following Part Numbers:

Fits ONLY these Part #:



900092

900094

900302



Note: The part # can be located on your existing spout, please verify the part # matches one of these!



Brand: JSP Manufacturing

MPN: GV-Spout-Cap-2pk



Measures Approximately: (See images for dimensions)

Outside Diameter: 1.30 inch

Inside Diameter: .85 inch

Height: .945 inch



Quick & Easy Installation:

1. Line up the arrows

2. Push onto the spout

3. Twist to lock



Aftermarket part fits the following:

Blitz Self-Venting Spouts (ONLY)



Please Note:

1. These may fit on a few other containers spouts like Kolpin & RotopaX, however ONLY if they used that specific style of Self-venting Black spout mentioned above.

2. Please verify your spout matches the picture, as these Caps only fit on that style. (Spout not included).

3. Blitz made several other types of spouts that these caps simply do not fit on.

• New JSP Brand Aftermarket Blitz Yellow Spout Cap ~ Top Hat Style
• Replaces the following Part Numbers: 900092, 900094, 9000302
• Measures Approximately: Outside Diameter: 1.30 inches / Inside Diameter: .85 inch / Height: .945 inch
• Quantity: 2 Pack ~ Keeps dirt and debris out of your can ~ Easy Installation ~ Made in USA!
• Fits Blitz Self-Venting Spouts ONLY ~(SPOUTS ARE NOT INCLUDED)

User questions & answers

Question:	What is the inner diameter of the cap
Answer:	Inside Inner ring 26.85mm or 0.86 inches Inside outer ring 33.44 mm or 1.316 inches
Question:	Will this fit on 2 gallons can
Answer:	Doubtful, as this is just a cap that fits on the end of the nozzle.
Question:	Will these fit blitz can #50833 5 gallon can plastic
Answer:	Yes it fits my red 5 gal plastic cans
Question:	Can you tell me if this fits an old Blitz 2gallon Model
Answer:	I used for my 50805 blitz model 1 gal gas can. It also fit on my 5 gal can