12 best get monopods

• 📹 Red Dot Design Award Winner: IFOOTAGE Corba 2 Series Monopods; 2017 Red Dot Design Award Winner (product design award); designed for easy operation and longevity. This monopod is ideal for travel and outdoor shooting.
• 📹 Detachable Design: 4 section design allows for flexibility in use. Our award winning quick release plate and removable trippod stand provide 3 options: 1) Fixed video monopod with adjustable feet, 2) Portable monopod, 3) Low angle camera pod for a variety of uses.
• 📹 Telescopic Design: Award winning buckle design make it to easy extend from 5.3 inches to 47 inches. The lightweight aluminum material is suitable for all SLR, DSLR, Video Cameras plus Camcorders up to 17 lbs.
• 📹 Pivoting Tripod: The monopod base enables 360° swiveling, 90° tilting in all directions and allows easy switches from landscape to portrait modes.
• 📹 Quick Lock and Unlock Release: Single hand operation. No buttons, no twisting, just a simple slide down to release and slide up to lock.The perfect suitable fluid head with ASIN: B07GR211GZ.

User questions & answers

Question:	I use bmpcc4k/sigma 18-35mm/zhiyun crane 3 lab--- will this work as a tripod
Answer:	You should love this ! Remember -It’s a monopod, and though it has three feet There is a swivel ball joint at the bottom of the shaft - so it can drift- and should not be left unattended. That said , I have a heavy Nikon D7500 w the Nikon 2.8 17-55 a very heavy piece of glass (But awesome in low light)? I tighten down the swivel and keep a foot on a leg and use it like a tripod for short attended periods- and use my GoPro For a GoPro this is all tripod you could ask for as the feet come off and you can set it up on a table Get this - you will love it and tell me later!!
Question:	Is there a way this tripod can be used for smartphone mounts? I have the shoulderpod mount and am trying to use it on this ifootage pod
Answer:	Yes it can. I use a Manfroto and what you have is good too. The key is the monopod head that goes between your shoulder pod / phone holder and the monopod. It can be done without a monopod head- then you would be doing all your tilts and swings w the monopod foot- a limiting situation in MHO. I use an old #2 Gitza ball head and it works out fine- fits in their case too. Fluid heads are good but overkill , by the time you really need a fluid head you might as well break out the real tripod. Keep it light and small. Accessibility and Maneuvering are key. A cheap ball head will do till you can upgrade.
Question:	Is it made in China or Italy
Answer:	It is manufactured in China but Design is British, UK .and it's phenomenal. The Chinese will probably knock it off soon, but for now the quality of the workmanship and materials are reminiscent of early Manfrotto work, solid ,over engineered, and built to last a lifetime of service. Honestly, I don't think you will find a better monopod- weight might be a factor, but you don't get something for nothing- and ...they make a graphite version I haven't tried!! Good luck on your work.
Question:	Will this fit the Manfrotto fluid head
Answer:	Yes, our professional tripod can fit the Manfrotto fluid head. Also, we offer our own fluid tripod head which is perfectly compatible: https://www.amazon.com/dp/B07GR211GZ The quick release plate comes complete with interchangeable 1/4”-20 and 3/8”-16 screws, which suit most brands cameras and devices.

Product features

IFOOTAGE Cobra 2-A120

Lightweight, highly durable, quick and easy to set up -- IFOOTAGE offers three adjustable feet and IFOOTAGE’s patented quick release system on our new 3-in-1 monopod. One minute it’s a true monopod reseting on its removable rubber foot, the next it’s standing tall on it’s own three feed allowing 360° controlled movement via its tension control/lock at its base. Traditional tripods now have a serious rival!

Product description

The BT13-Qk is our mid-height Precision Rail Monopod (PRM) with QK02 Quick Knob. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.

• Weight: 8.3 ounces
• Folded Length: 4.80" approximate
• Elevation Range: 4.75 – 5.65”
• Designed, Engineered, Machined & Assembled in America.

User questions & answers

Question:	Is it a universal rail fit
Answer:	It fits any standard picatinny rail, so yes, it fits about 99% of any rail out there unless it's a proprietary/brand specific rail
Question:	It wont install onto my ruger precision rifle
Answer:	Ruger precision rifles have a plastic cover over the rail that keeps dirt out and protects the rail. Remove the cover and it will fit.

Product description

TELESIN Ultra Long Selfie Stick Designed For Group Photo Shooting

Especially work great with Insta 360 One R Twin Edition!

Extendable at 3 Lengths 22", 47.2" and longest 106"!

Made in Carbon Fiber Material which makes it as lightweight as possible at 250g/0.55lbs, very easy to carry out for traveling!

Currently the most innovative design for selfie pole in the market!



How to set the middle length 47.2" /120cm

This selfie pole has 7 extension legs. There is a black EVA locking on the top of the pole, move it down to the position above of the silver ring that on top of the first extension. Pull out the last two extensions (the sixth and seventh), fix the sixth leg with the EVA locking to the silver ring position. With this action you can get a 1.2 meters (47.2 inches) selfie pole. If you still have queries about the length setting, please feel free to contact with our customer service for help!



Features:

1. Easy to use for different distance shooting, getting amazing shoot both for selfie and group photos

2. The end of the stick has a standard 1/4 tripod adapter (female) which can be mounted with a strong tripod stand

3. At top of the stick has a 1/4”bolt and a GoPro mount which can be removed to fit with other cameras that has standard 1/4” adapter



Compatible with: GoPro Max Hero Series Hero 8, Hero 7, Hero 6, Hero 5, Hero 4, Hero 3+, Amkov, XiaoMi Yi, AMK 5000 5000S, Dazzne P2 Dazzne P3, EKEN H9, FIREFLY 5S FIREFLY 6S, Polaroid Cube, SJCAM 4000/5000/6000/7000, M10 SJCAM M10 Plus, Soocoo C10 S60, Insta 360 ONE X, DJI OSMO ACTION



Specifications:

Max operating height: 106 inches (270cm)

Min operating height: 22 inches (55cm)

Folded height: 22 inches

Net weight: 220g

Max operating load: 1.5KGs/3.3lbs (Suggested load weight whthin 500g/0.66lbs to ensure proper use)



Package Content:

1 x Super Long Selfie Stick

1 x Nylon Storage Bag

1 x Thumbscrew

• Ultra Long Selfie Stick designed for group photo shooting in gathering activities, party, family trip, traveling, camping, pinic, sports, games and also makes it possible to get full view selfie photos! Extendable at 3 Lengths 22", 47.2" and 106"! Currently the longest selfie pole in the market!
• NOTE: This selfie pole has 7 extension legs! Please read the product description about how to set the middle length!! Made in Carbon Fiber Material which makes it as lightweight as possible at 250g/0.55lbs, very easy to carry out for traveling!
• Flexible: Support a variety of action cameras. Multi-angle: 360°Rotation helps to capture every wonderful moment!
• Secure: Anti-slip soft holder prevents selfie stick and camera from falling down and provides great stability, to make sure you can enjoy the photography without any worries!
• Compatible with GoPro Max, GoPro Hero 9 Hero 8, Hero (2018), Hero 7, Hero/6/5/4/3+/3/2/1/ Session Fusion Action camera, Mi Sphere 360 camera, Insta 360 ONE X, Insta 360 One R Twin Edtion, DJI OSMO ACTION most mini sports cameras, compact action cameras

User questions & answers

Question:	Can it be used for scuba diving salted water
Answer:	The end can be removed and you can wash it out. Air will not circulate through it well though and the rubber seals do not hold as well wet, so until it drys you will have to use it at full length for it to be reliable. At shorter distances it could extend further if used pointed down or rotate around if the camera is off center like it would be if it was looking at you.
Question:	Is the bottom of the stick threaded and able mount on a tripod
Answer:	Yes, the bottom is threaded and able to be mounted on a tripod. Please make sure you use a strong tripod especially when it's extended in longer length.
Question:	Could it be used with other regular 1/4 screw cameras ? (Without putting a separate adapter
Answer:	Yes if your talking about small cameras like a GoPro. I would not trust this stick with any camera that is heavy.
Question:	Is this an invisible selfie stick
Answer:	Depends on how you position your 360 camera. If you have it in line with the stitch line, most of the stick is invisible. When fully extended you need to remove the foam piece on the end or else it will show up in your shot. ALSO, if the stick sways too much when fully extended, it may appear in your shot as well. Hope this helps.

Product description

An Amazon Brand

• 2-Pack of Amazon Basics 67-Inch Monopod
• Supports video cameras, still cameras, and scopes up to 6.6 lbs.
• 1/4-inch univeral thread mount
• Four leg sections able to extend 67-inches
• Non-skid rubber foot and retractable spikes
• Includes carrying bag
• Built in cushion grip and adjustable wrist strap

User questions & answers

Question:	When you spin the rubber foot "up" can you attach a 3/8" universal monopod base to it
Answer:	I would say "No" based on just looking at it. There is a pointed tip that goes out beyond the threads so I cannot imagine the base being able to thread onto this foot because the rubber movable tip does not come off-it just adjusts for dirt or concrete.
Question:	Can I hold on to the grip and put my camera on the other end to take photos and videos of myself? Also, is this monopod waterproof
Answer:	No its not possible to hold on to the grip and place ur camera at the other end. It doesnt have the functionality to do so. This is not one of those monopods that you can take selfies with. And when you mean it can get wet and will not hinder its functions? Then yes
Question:	What is the collapsed length of the monopod
Answer:	Completely collapsed, the monopod is 21 3/8" long (54.3 cm). When packed in the included case, it's 22" (55.9 cm).
Question:	Can the Non-skid rubber foot be unscrewed (removed) in order to connect to the top of a tripod as an extension
Answer:	The answer is, not easily. The screw isnt threaded all the way. It is push in fitting into the pole. Also the spike is part of the screw. You can rip it out, tap the plastic end cap to accept the 3/8 male to 1/4 female adaptor that come with it and then thread on your tripod foot. It will be extra work and you need threading tools but for $18 you may still come out well ahead. You might also be able to buy a 1/4 stud with the same type push in fitting. I have pictures but no way to post it here.

Product description

"ALAN is our incredible professional carbon fibre monopod. Built for versatility and resilience, Alan is compact enough for transport in hand luggage and extends to a maximum height of 1.5 metres. Formed from 100% pure carbon fibre and aircraft grade alloys, Alan is both light and robust, with a huge maximum load capacity of 60kg! Ideal for sports and action photography, and stabilisation for videographers, Alan features dual 1/4""-20 and 3/8""-16 threads which enables use as a microphone or camera boom. The unique Big Grip provides maximum grip and includes deep channels designed to disperse moisture, and the patented Tri-Mount plate has hollowed spurs for the attachment of accessories. ALAN paired with DOCZ2 - a rugged foot stabiliser designed specifically to add stability to monopods. With an alloy base construction, a rugged ABS top cover and rubber boot adjuster, DOCZ2 adds a stable, solid base for monopods with no flexing. The rubber adjuster controls the friction lock on DOCZ2’s ball mount, enabling a smooth panning motion for action and sports photography. The ball mount has a 1/4""-20 thread with an additional 3/8”-16 adapter, and can be locked upright for extra stability. DOCZ2 is equally useful as a mini tripod for low level or table top use. Its 1/4""-20 mount allows cameras to be mounted directly on to the ball, or a tripod head can be added, by using the supplied 3/8""-16 adapter. DOCZ2's legs fold upwards, creating a more compact footprint for transportation.

• Load capability 60 kg / 130 lb
• Recommended for: Action / sports / video
• Folds to just 45 cm / 17.7 “
• Dual 1/4”-20 & 3/8”-16 threads at each end
• 5 Year global warranty

User questions & answers

Question:	What quick release floating heads does this support
Answer:	Any: Dual 1/4”-20 & 3/8”-16 threads at each end
Question:	What monopod camera head / plate combination fits the Alan
Answer:	Any head will work. As stated in the description: Dual 1/4”-20 & 3/8”-16 threads at each end. Anything made to work on a tripod/monopod uses one of those sizes (if it doesn't, don't buy it).
Question:	Will it support a sigma 150-600 lens
Answer:	Absolutely! I’ve used mine to support my Can 1DX Mark 3 with the 600mm f4 USM with converter. No problem supporting the 150-600

Product description

We will provide you with 10 Years Worry-free warranty.

We will actively solve any problems related to the products for you. If you have

any problems, please feel free to contact us and we will solve the problem within 24 hours!



How to install a monopod?

You need to unscrew the leg tube with the words "detachable monopod",

then remove the hook, take out the monopod, and attach the leg tube to the monopod.



How to switch into macro photography (how to use the macro center column)?

For added versatility, the center column allows an attached camera to be

easily raised toward an elevated subject or over a scene, which is particularly useful for copy

stand or macro photography. For subjects along the ground, the center column can also be

used to obtain low angles while the tripod's user is positioned comfortably behind the camera.



Victiv AT26 Pioneer Tripod Specifications



Head

Head Type: Ball Head

Camera Mounting Screw: 1/4"-20 Male

Quick Release Plate Type: Arca-Type

Number of Bubble Levels: 2



General

Load Capacity: 19 lbs (8.6kg)

Maximum Monopod Working Height: 81’’ (205.7cm)

Maximum Tripod Working Height: 78" (197cm)

Minimum Working Height: 7.8" (19.8cm)

Folded Length: 19" (48.3cm)

Materials: Aluminum Material

Weight: 3.92 lbs (1.78kg)



Legs

Leg Lock Type: Flip Lock

Leg Sections: 4



Center Column

Center Column Functions: Removable, Reversible

Center Column Shape: Matte

Center Column Sections: 2

Center Column Extension Type: Rapid



What's in the box?

1 * VICTIV AT26 Tripod

1 * Carrying Bag

1 * Ball Head Bag

1 * Macro Center Column

3 * Manual Wrench

1 * English Instruction

• 【Height Winner】Tripod can be set for a minimum height of 7.8" to a maximum height of 78" with column fully raised. Tripod features aluminum leg construction making it both lightweight and sturdy
• 【Excellent Stability】26mm thicker leg tube provides better load bearing capacity. 3.92lbs tripod weight and 19 lbs maximum load weight. A tiny spring loaded retractable hook on the extendable so you can hang some addition weights to increase the load
• 【Aluminum Head】The all-metal 36mm ball head provides better stability, and the new upgrade features a larger ball head for higher tightness, giving your camera better security. Better fluency, giving you more flexibility while shooting stable
• 【Multifunction】2-in-1 78'' tripod & 81'' monopod. The macro centre column allows low angle shots. Each leg have leg angle lock, which allows the legs to independently be spread to different angles to get best stability on uneven terrain, inclines, and steps
• 【Portable】Flip lock design can get a 78-inch ultra-high tripod in seconds. The included tripod carrying case makes you more convenient and easy to carry during your trip

User questions & answers

Question:	This works with a GoPro
Answer:	Yes.Workable
Question:	What size is the arca swiss plate? 20mm, 30mm, 40mm
Answer:	40mm
Question:	Do you like the way the legs extend with clicks holding them or would you rather have them screw loose and screw tight
Answer:	The legs click into position for angle of legs, as in how far apart they open, relative to one an other. there is a lever, that does not click, that opens for individual leg extention length. I love this feature. I am able to quickly extend the legs and retract and not have to trust that I have it screwed to tighten the legs. The screw type, has failed me numerous times. I like to see that it's closed so the legs do not retract when I stand the tripod back up.
Question:	Will I have to buy a separate attachment to attach my iphone
Answer:	Yes you will have to buy separate attachment.

Product description

Selfie Ring Light with Tripod Stand & Cell Phone Holder for Live Stream/Makeup, UBeesize Mini Led Camera Ringlight for YouTube Video/Photography Compatible with iPhone Xs Max XR Android (Upgraded)

• 【Dimmable Ring Light】Featuring 3 color lighting modes: Warm Light (3000K), Cool White (4500K), and Day Light (6000K), and each mode has 11 brightness levels, 33 options in total. UBeesize ring light will meet all your needs in different circumstances. It is the perfect dimmable lighting to take away all the unflattering shadows. Dimming range: 1%-100%
• 【Upgraded Tripod Stand】No-Twisting-To-Lock that collapses over time, UBeesize new tripod adopts quick-flip locks and weighted tripod base for increased stability so it won't tip over. Extends from 17.5" to 51" and made of high-quality aluminum, it can be adjusted to any length between to match your needs and last you for years!
• 【Rotatable Phone Holder】You can easily adjust the phone holder to find one angle you desire (horizontal, vertical, high-angle, low-angle and more). The phone holder is spring-loaded and extends up to 3.6" wide, it is compatible with almost ALL smartphones with or without a case.
• 【USB Powered】Works with most devices that support USB port, like laptop, PC, power bank, USB charger, AC adapter, and etc. There are four buttons on cords to power on/off, switch the lighting mode, and adjust brightness levels, it is easy to find your preferred options in seconds.
• 【3-Years Replacement Service】UBeesize is a top brand in mobile photograph and all our products enjoy excellent after-sales service. To be more specific, any part in this ring light stand set (ring light, tripod stand and Bluetooth remote.) can be replaced for any quality issue.

User questions & answers

Question:	Is the actual light detachable? If so would I be able to mount it to a third party tripod
Answer:	The light is detachable, and I'm fairly certain you could use a third party tripod
Question:	How tall is the tripod stand
Answer:	Hello, the max height for the tripod stand is 51'', min height is 16.5''.
Question:	My light is plugged into the wall and it comes on but then turns off after a short amount of time. Like maybe 15 minutes. Is there a timer
Answer:	Bought in early March 2020, woke up this morning and the light was on and slightly flickering would not turn off with the switch. Unplugged and plugged back in same issue. For being so highly rated I expected it to last more than 3 months.
Question:	Does the remote works for video
Answer:	Yes. To start a video on iPhones, please switch the native apple camera app to video mode first, then click the IOS button to start the video, click the same button again to pause the video.

Product features

UBeesize 8-inch Ring Light with Tripod Stand

Dimmable with 3 color modes and 11 brightness levels, perfect for online classes/video recording/makeup lighting and more

Choose the Most Favorable Light Color for Your Skin Tone

Upgraded 2020 Lighting Solution - Brighter, More Concentrated

Detachable Sefie Stick Tripod for Indoor & Outdoor Use

Included Bluetooth Camera Phone Remote, Compatible with iOS and Android Phones.

Product description

The BT04-QK is our standard height Sling Stud Mount with QK01 Quick Knob. Additional Thumbnut installed to LOCK the unit into a fixed elevation. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.

• Elevation Range: 3.75 – 4.85”
• Folded Length: 3.95"
• Weight: 7.3 ounces

User questions & answers

Question:	I have a savage 110 fcp with a 9" bipod on the front. and i'm guessing this might be too tall in the back. does anyone know for sure
Answer:	Is the bipod adjustable? I have a 9-13 inch bipod and this works just fine . with bipod collapsed it sits just about even . And I have a savage 11/111
Question:	Which would work on a savage 110 ba
Answer:	Matthew, I would say yes. There are two versions of this fine device. One for a rail mount and one for a stud where you would attach a shoulder strap. I assume you have a stud on that weapon. I love mine. I used it with a bipod on the front and they provide a very nice platform for long range shots.
Question:	Can I get it with a steel tac cap
Answer:	That part has to be purchased separately and replaces the rubber on the bottom. The B&T accu-shot part number is BT07: Tac-cap accessory.
Question:	Will this work on a m1a loaded with the archangel stock
Answer:	Not very good for Archangel stock, very loose on sling stud. Stay with sandbag or hand

• 【 Compact & Lightweight 】 The extension selfie stick can extends in 3 separate lengths so you can choose how far you want it to go. The hand grip is light weight. Portable, adjustable and compact enough to carry in a GoPro case, backpack, pocket
• 【 Waterproof Design 】Be able to use it in the water and in wind of over 40 knots. Stick and camera was perfect when you took it on class 4 rapids. (Please rinse it with fresh water and dry after every use in salt water (Not Floating)
• 【 Easy Twist to Extend 】 It allows monopod to extend from 7" to 19". Comfortable strap with adjustable toggle to keep monopod and camera secure to your wrist
• 【 Compatible With 】 For GoPro Hero 9 8 7 Hero 6, Hero 5, Hero 5 Session, Hero 4 3+ 3 2 1 AKASO EK5000 EK7000 SJCAM SJ4000 etc. Xiaomi Yi GeekPro. Pls Note: There is NO BUTTON on the Selfie Stick and CAN'T USE FOR MOBILE PHONE.
• 【 Easy to Use 】The selfie stick is perfect for traveling, diving, snowboarding etc. The a ability of the grip to extend allows you to get close to fish and coral while remaining a safe distance away

User questions & answers

Question:	Will this work with an apeman camera
Answer:	You can contact seller. Here is the seller service email: [email protected] They will solve your problem with fast speed and provide 24 month warranty that you can ask for return and refund. Their service is very good
Question:	will this work with a gopro hero
Answer:	Brilliant instructions given. Used for support after my dislocated knee. Excellent tape and great price too. Sticks really well especially if warmed with a hairdryer. Manages to go to thrrough shower too.
Question:	does the stick float
Answer:	Its very easy to put on and there are YouTube videos to watch as well if you don't understand the directions.
Question:	Can you take off the end and put a tripod on it
Answer:	Yes. It can give the necessary support to the ankle if you should need to be weight bearing while it is healing. For best healing results, wrap, elevate, apply ice periodically, and rest the ankle! Take anti-inflammatory meds if indicated. If you wrap your ankle with any kind of tape, frequently check circulation in toes to make sure that any swelling that occurs does not impede blood flow.

Product description

The XPRO Monopod Aluminium 4-section with Fluid Video Head is a professional full fluid video monopod made to satisfy videographers who leverage the height of their monopod to get above crowds and to achieve a wide range of shooting angles. These state-of-the-art Manfrotto legs have inherited the perfect combination of rigidity and locking safety of professional tripod ranges, like the 190 collection and 055 collection. This monopod is equipped with Manfrotto’s full fluid base (MVMXPROBASE) featuring the innovative FLUIDTECH system that makes Manfrotto XPRO Monopod+ the first of its kind on the market to feature 3D fluidity. The FLUIDTECH video base enables the ultimate shooting smoothness on pan, tilt and swivel for an expanded range of perspectives. The three retractable feet make it extremely portable when folded and allow the monopod to be easily carried everywhere. The new D-shaped aluminium tubes greatly improve anti-rotation resistance throughout the monopod, following the videographer’s rapid rotation movements. Combined with the Quick Power Lock (QPL) which strongly locks the lever onto the monopod tube’s flat side, this eliminates unwanted jerky movements. The newly designed leg warmer guarantees exceptional grip and full footage control with a special version of the successful Manfrotto 500 video head . The MVMXPRO500 replaces the Manfrotto MVM500A

• FLUIDTECH base for smooth movements in all directions
• Quick power lock reliably secures & ensures super-fast set up.Maximum Working Height: 79.9 inches. Folded Length: 30.7 inches
• Newly designed rubber leg warmer for fast & secure movement
• Great operating height for overhead shooting. Dedicated professional video head
• The MVMXPRO500 has one Easy Link 3/8 inch connector to fit an external monitor or other accessories and it comes with the Manfrotto 500PLONG video camera plate

User questions & answers

Question:	How does this compare to the carbon fiber version
Answer:	Cheaper maybe a tad heavier
Question:	Several reviewers mentioned that you can't pan with one hand using a handle. But since it is a monopod, can I twist the whole tripod around to pan
Answer:	Yes you can
Question:	What is the length closed
Answer:	Approx. 26 1/2" from end to end.
Question:	Do I need to secure the camera with one hand all the time
Answer:	On flat or mostly even ground, you don't. If you want to do any kind of panning you will need to hold it.

Product features

Manfrotto XPRO Monopod+

The Manfrotto XPRO Monopod+ family of photo and video monopods brings to the market the innovative FLUIDTECH Base for smooth footage and the possibility to convert photo monopods in video monopods.

Thanks to the improved fluidity and the superior performance of the leg, the XPRO Monopod+ ensure incredibly smooth footage, ultra-sharp photos and creative shooting perspectives.

FLUIDTECH Base

First of its kind, the full Fluid Video Base delivers the ultimate smoothness in an extremely compact solution for advanced video shooting.

Quick Power Lock

Quick Power Lock system ensures extreme locking grip released with the movement of a single hand for a rapid and easy set up.

Ergonomic and easy to carry

The new aluminium d-shaped tubes together with the leg warmer guarantee excellent ergonomic grip and full control during the movement.

Versatile: Photo and Video

Thanks to the removable FLUIDTECH Base, the monopod can be easily used for both photo to video application.

• 【TRAVEL/OUTDOOR】13.78” compact storage size and easily carried with the bag. Tripod legs can be adjusted in three levels of opening angle to stabilize on varying grounds and incline levels. Suitable for travel or outdoor shooting.
• 【FLEXIBLE】360°PANORAMA AND BALL JOINT: The specially designed ball-head can rotate 360° and get free angles, allowing you to get the perfect shot and amazing panorama every time.
• 【CONVENIENT】ZOMEi M5 camera tripod is from 16.14" to 55” Flexible Adjustment. 4-section column legs with quick release flip-locks allow you to adjust the working height from 16.14” to 55" in seconds.
• 【TRANSFORM】ZOMEi M5 tripod can be quickly disassembled with the central axis screw and transform into a monopod, providing an alternative way of shooting with ease.
• 【PORTABLE】2.73lbs / 1.24kg tripod weight and 17.6lbs / 8kg maximum load weight. 13.78" in folded height and easy-carried. This tripod can make it the best companion of your DSLR cameras and withstand heavier load compared to similar products yet remain stable.

User questions & answers

Question:	Does this product come with any warranty
Answer:	Yes, ZoMei M5 Tripod comes with 2-year quality warranty and lifetime friendly customer service.
Question:	does it work with the iphone 8 plus
Answer:	It works with my Iphone 7
Question:	Can you adjust the height
Answer:	Yes. The legs have 3 height adjustments and the neck is also adjustable.
Question:	Will this phone tripod hold my phone in a way that it can record video straight down (like a document camera
Answer:	Yes it does!

Product features

Dual Center Axis

The dual center axle allows the tripod to be minimum storage size, and to be taller when worked.

360 Degree Ball Head

360° ball-head allows you to shoot from all angles and discover different beauty.

Multi Equipment Compatible

With the help of 1/4 inch screw, this tripod could connect with most DSLR, mirrorless cameras, projector, DV, fishing lamp, ring light and Phone.

Pack List

1 x ZOMEi M5 Aluminum Alloy Tripod, 1 x Carrying Bag

1 x Bluetooth Remote Control, 1 x Phone Clip

1 x Hexagonal Wrench, 1 x Instruction manual

Attach Extra Weight

Compact Storage Size

Lower Angle and Wider View

• 【 Easy twist to extend 】Pls Noted:Selfie stick for GoPro stick with "FORETOO" on the tube.Please confirm the product you ordered sold by Foretoo. It allows monopod to extend from 7" to 19". Comfortable strap with adjustable toggle to keep monopod secure to your wrist.
• 【 Compact design & Lightweight 】 Selfie stick can extends in 3 separate lengths so you can choose how far you want it to go. The hand grip is light weight .Portable, adjustable and compact enough to carry in a GoPro case, backpack, pocket.
• 【 Waterproof design 】Be able to use it in the water and in wind of over 40 knots. Stick and camera was perfect when you took it on class 4 rapids. Please rinse it with fresh water and dry after every use in salt water (not folating).
• 【 Easy to use 】 The selfie stick is perfect for traveling, diving. The a ability of the grip to extend allows you to get close to fish and coral while remaining a safe distance away.
• 【 Design for GoPro 】 Compatible with GoPro Hero 6,Hero 5, Hero5 Session, Hero 4 3+ 3 2 1 AKASO EK5000 EK7000 SJCAM SJ4000 etc. Xiaomi Yi GeekPro.Pls Note:NO BUTTON on the Selfie stick,NO BLUETOOTH REMOTE CAN'T USE FOR MOBILE PHONE

User questions & answers

Question:	Can this be used underwater?Is the selfie stick heavy
Answer:	yes, sure.
Question:	Does it work with Akaso EK
Answer:	Hello, it works with gopro hero+ with its housing case on.
Question:	Does the bottom cap unscrew to reveal a tripod adapter
Answer:	No, it doesn't. You can take it underwater but this selfie stick doesnt float. I bought a pair of wrist-band floats.
Question:	Does this work with the new GoPro session
Answer:	No, the end with no 1/4 screw. It cannot take off