12 best gorilla gripper panel carrier

Product description

The Gorilla Gripper is a unique construction tool that allows one person to lift and carry heavy sheet goods (such as plywood, drywall, particleboard, melamine, tempered glass and granite) from the top, with much less strain and greatly reduced risk of injury to the back, neck, shoulders, arms & hands! The gripper works by clamping onto the top of the material, creating a sturdy temporary handle for the person who is carrying them. It allows the user to lift and move them with a straight back, eliminating the requirement of bending over to get under the bottom, thus avoiding the torqued back and the aches and pains that are far too familiar to construction workers and do-it-yourselfers. It's made of aircraft-grade aluminum, very rugged and virtually indestructible. It is continuously self-adjusting from 3/8-inch to 1-1/8-inch. Rubber gripping pads mounted on both plates protect the surfaces of the materials from being damaged or marred. There's just nothing like the Gorilla Gripper...it works!

• Makes it easy for one person to lift and carry sheet goods
• Reduces strain on back, neck, shoulders & arms
• Promotes personal safety in multiple ways
• Increases carrying capability
• Ruggedly constructed lifetime tool

User questions & answers

Question:	Has anyone used this product in moving stall mats
Answer:	yes, I do....is easer to move big paneles of wood
Question:	Can this carry two 3/8" osb panels at the same time? i know the thickness is fine, but will they slip out? thanks
Answer:	They should not slip. You do have to be careful to lift straight up, but I used this when re-roofing my house and it worked great pulling multiple sheets of OSB and 3/4 inch ply off the ladder lift. Really made a difference in safety.
Question:	Any other recomended
Answer:	works great. grab in center.
Question:	Have to carry cement board up flight of newly finished stairs. Can 2 people and 1 gorilla gripper work
Answer:	It should work - look over the specs as there are 3 basic sizes and each carry their own unique product.I think might need 2 grippers.Hope this helps.

Product description

Gripping hand tool designed for lifting, carrying and moving a variety of building materials that are large, unwieldy and heavy…panels of plywood, particle board, drywall/wallboard, melamine, sheet metal, solid core doors, table tops, solid surface materials, granite, marble and more…all with surprising ease! The unique Gorilla Gripper grips from the top, making it easy to position, providing wonderful leverage, permitting a full field of vision while carrying, and encouraging proper lifting technique. It has a soft-cushioned handle that serves as a lever, using the weight of the panel to create clamping force. With non-marring rubberized gripping pads the gripping plates pivot to remain parallel, self-adjusting to the thickness of the material. An excellent solution for anyone having to move sheet goods, whether every day or once a year! Considering the importance of a well-preserved back, the Gorilla Gripper is likely to be the best investment a construction worker, woodworker or DIY’er will ever make…and less expensive than one visit to a Chiropractor!

• Automatically clamps onto any stock from 0''-3/4''
• Ruggedly built; indestructible
• Made in the USA from aircraft aluminum
• Load rating of 200 lbs.
• Labor-saving. Back-saving

User questions & answers

Question:	Can this be used with drywall? Initial description on here states "plywood". Thanks
Answer:	Gorilla Gripper makes 3 models of the carrier for the professional.Best to read the ads for description.This model does include drywall as a specific product for use with the carrier.Hope this helps. Product is in stock.In the Hands of Professionals
Question:	How would this work on melamine covered sheets? Would it slip off
Answer:	I use mine to carry two sheets of .050 X 48" X 96" Aluminum Sheet with no problem.
Question:	Anyone carry 4x8 sheets of 3/4 mdf or melamine
Answer:	I've carried 4x8 sheets of half inch ply up two flights of stairs to a third floor job using the Gripper. The weight of that is about my limit. I'm 75 so may have lost some strength. I think it's a great carrying tool, and has enabled me to lift stuff I'd otherwise have to drag. It also allows you to carry without bending and stretching, so it maximizes what you can carry without injury.
Question:	How many gorillas will this model grip
Answer:	Just one at a time. If you need to move more than one gorilla, you will need multiple gorilla grippers, and possibly a friend to help you. As a Young Jedi, you may be able to use the Force, so extra assistance may be totally unnecessary. May the Force and Gorilla Grippers be with you.

Product description

Features Benefits:

Ergonomic design for one person, Cushion-handle for all day comfort

Equip with two bar construction for stability,

Super leverage 'Advantage', Rate up to 150 pounds

eXtremely durable glass-filled nylon polymer gripper plates

Good for Lifting Carrying:

Plywood up to 3/4",Drywall up to 3/4",Particle board,Melamine,Sheet metal,Cement board,Thick glass panels

Ideal for carrying or dragging rubber mats

Dimensions Weight :8.4 x 6.4 x 5.6 inches

weight: 0.9kg

used for 0~22mm thickness wood board

WARNING:

Read instructions before use!

You are assuning eXtr risk if you use Gorilla Gripper 'Advantage' while climbing stairs or ladders- or with pulleys, chains or ropes

• ★【One-hand carrying】 : Ergonomic design for one person to lift and move sheet goods by one hand,simply place the clamp over the top and lift
• ★【Application】 : Heavy Duty Holder for Carrying Dry Wall,Plywood - the most innovative tools for lifting and carrying all kinds of plywood, panels, sheets, and stabs.
• ★【Materials】: The clamp and the handle arm are machined from aerospace-grade aluminum, while the joint is made from a solid steel bar. The handle itself is made of durable, impact-resistant ABS polymer.
• ★【Easy on your back】: carrying drywall, plywood, and sheet goods can be very hard on your back. This handy tool takes the strain off your back and allows you to carry heavy materials with a single hand.
• ★OUR COMMITMENT: 100% satisfaction and refund. If you have any questions, you can send us an email and we will reply you within 12 hours. Search for our brand name, enter our store and see more products.

Product description

Dear God, hello! Welcome to our store. We have all the products you want here.

Wooden Plywood Glass Panel Carrier 0 to 25mm Furniture Gripper Sheet Goods Carry Handle Wooden Handle Wrench Handling Tool

Description:

Material: aluminum alloy + steel + rubber

Maximum load: 50KG

Quantity: 1pc

Net weight: 1.0kg

Features: one hand, labor saving 50%

Package:1*piece

NOTE:

Only the product itself is sold, not including other decorations.

Manual measurement, product size may have an error of 1-2mm.

Due to differences in light, environment and display, it is normal for products and pictures to have a certain color difference.

If you have any questions or concerns, please contact us!

• ★SELF-ADJUSTING GRIPPER CLAMP WIDTH - This innovative tool can hold up to two panels or sheets simultaneously.Simple design that allows the clamp to grip a variety of different kinds of panels and sheet goods. When you start lifting, the clamp automatically adjusts the width depend on the thickness of the panel or sheet.
• ★ONLY ONE-HAND CARRYING - Ergonomic design for one person to lift and move sheet goods by one hand,simply place the clamp over the top and lift.
• ★HEAVY DUTY HOLDER - Carrying all kinds of plywood, panels, sheets, and slabs, carry MDO or MDF panels, OSB, melamine, drywall, tabletops, sheet metal, and other sheet goods. The self-adjusting gripper 0-1"
• ★INNOVATIVE TOOL DESIGN - Heavy-duty solid metal construction. The clamp and the handle arm are made in aluminum. The handle is made of impact-resistant ABS polymer. This high-quality construction ensures that the tool can hold up to a lifetime of strenuous use.
• ★OUR COMMITMENT: 100% satisfaction and refund. If you have any questions, you can send us an email and we will reply you within 12 hours. Search for our brand name, enter our store and see more products.

• Quality Material --- Thickened aluminum alloy clamp with textured surface, sturdy & anti-slip for tight grip without marring. One-piece cast solid steel handle with impact-resistant rubber for durability and comfy grip.
• One-Hand Moving --- Ergonomic design allows 1-person to lift and move sheet goods with one hand, simply automatically clamp the top of panel and lift to carry.
• Back & Time Saver --- Gripper clamp the top instead of the bottom with bent back and hands, saves back strain & pinched fingers, moves sheets effortlessly and efficiently.
• Wide Application --- Heavy duty Panel carrier gripper for easily carrying & lifting plywood, drywall, sheetrock, MDF, OSB, cement board and other sheets goods. Jaw automatically fits thickness up to 0-0.98”/25mm.
• Easy to Carry --- The Plywood Carrier is lightweight and small size but strong, fit in a tool belt or pocket for instant & easy access.

Product features

Heavy Duty Plywood Drywall Panel Carrier, Alloy Sheetrock Carrying Tool for Lifting Moving Sheet Goods

Easy to Use

• The clamp can automatically adjust to the sheet's thickness (0-1") with a tight grip on the panel up to 110 lbs until you lower it to the ground when releasing it.
• Allow one person to carry panels without bending over, greatly reduce strained muscles, back, pinched fingers and other potential injuries when carrying sheets.

Wide Application

• With the Panel Gripper Carrier, you can now carry large and heavy sheet materials like plywood, drywall, plasterboard, table tops and sheet metal etc. with ease by yourself.
• Note: For a good performace, please make sure the girp is firm before lifting and moving.

Alloy Clamp

• Premium quality alloy clamp for strong bearings and long duribility.
• No rust, beautiful appearance.

Textured Surface

• Panel Gripper with textured rubber surface for a tight grip.
• No marring problem for sheets.

One-piece Forged Arm

• Heavy-guage metal arm handle for heavy duty use in a long period.
• Sturdy, high hardness, no deformation.

Rubber Handle

• Ergonomic-designed rubber handle for a comfy grip
• Anti-slip, impact-resistant, reduce fatigue.

Product description

Do you still struggle a lot when lifting & carrying cumbersome sheets goods?



Here's your saver! With the Panel Gripper Carrier, you can now carry large and weighty materials like panels of plywood, drywall, MDF, OSB and sheet metal with ease.



The handy carrying handle let you easily move it around to your side. The clamp will automatically adjust to the sheet's thickness with a tight grip until you lower it to the ground when releasing its grip. This practical plywood carrier helps reduce strained muscles, back, pinched fingers and potential injuries.





Highlights:



-Never fall: automatically tigt grip on the panel up to 100 lbs until you lower it to the ground when releasing its grip.

-Protect thoroughly: special nylon grid pads mounted on clamp inside to protect the surfaces of the materials from being damaged or marred.

-Ergonomic design: allow one person to easily carry heavy panels from the top with one hand only

-Prevent injuries: greatly reduce the risk of injuries to the back, neck, shoulders, arms, and hands





Specifications:



Material: metal + nylon

Weight: 0.83kg/ 1.83 lbs

Color: Black

Clamp gap: 0"-1"

Load-bearing Capacity: 100 lbs





Package Includes:

Panel Gripper Carrier x2

• Wide Application --- Heavy duty Panel carrier gripper for easily carrying & lifting plywood, drywall, sheetrock, MDF, melamine, OSB, tabletops, cement board and other sheets goods.
• Ergonomic Design --- Allows one-person to easily carry cumbersome panel with one hand gripping on comfy handle, moving sheet goods efficiently and effortlessly, saves your time and labor.
• Back Saver --- No need for bending over to carry with bare hand, greatly reduce the risk of injuries and strains to the back, neck, shoulders, arms and hands.
• Automatic Gripper Clamp --- Simply clamps onto sheets, automatically adjusts to the thickness of the panel or sheet with 0-1” thickness. Easy to use.
• Strong Material --- Multi-groove nylon clamp with textured surface, sturdy, wear-resistant & anti-slip, tight grip without marring problem. One-piece cast metal handle with impact-resistant ABS for durability and comfy grip.

Product features

Easy to Use

• The clamp can automatically adjust to the sheet's thickness (0-1") with a tight grip on the panel up to 100 lbs until you lower it to the ground when releasing it.
• Greatly reduce strained muscles, back, pinched fingers and other potential injuries when carrying sheets.

Wide Application

• With the Panel Gripper Carrier, you can now carry large and heavy sheet materials like plywood, drywall, MDF, OSB, table tops and sheet metal etc. with ease by yourself.
• Note: For good performace, please make sure the girp is firm before lifting and moving.

Ergonomic Design

• The hanlde made of quality rubber for comfy grip.
• Allow one person to easily carry heavy panels from the top with one hand only.

Nylon Grid Surface

• Special nylon grid pads mounted on clamp inside
• Protect the surfaces of the sheet materials from being damaged or marred.

One-piece Cast Metal

• One-piece cast metal arm strengthen the bearings.
• Heavy gauge metal handle for longer durability.

Product description

Gorilla Heavy Duty Tread Tape is designed to provide durable traction to wet, slick or high traffic areas. The multiple layers of protective coating ensure long lasting, durable grit that lasts both indoors and out. Gorilla Heavy Duty Tread Tape is perfect for ladders, steps, ramps, boats, RVs, decks, and more! DIRECTIONS: 1. Surfaces must be flat, dry and free of dirt, grease, and oil. Clean using isopropyl alcohol. Dry thoroughly. 2. Cut tape to desired length and round corners. 3. Remove liner and apply to surface starting at the center and moving toward the edges. IMPORTANT: Apply when temperature is above 39° F. In-use temperature range: -40° F to 220° F. Prime and seal all wood and concrete before use. Not recommended for areas with continuous water submersion such as pools, tubs, and spas. Avoid placing Tread Tape in grout lines, cracks or to bridge gaps. Warning. To help reduce the risk of slips, falls, and other serious or permanent injuries Gorilla Heavy Duty Tread Tape should be used only in accordance with its application directions. You are responsible for evaluating if Gorilla Heavy Duty Tread Tape is appropriate for your intended use and that it is being applied in accordance with its application directions. Gorilla Heavy Duty Tread Tape could become less effective or degrade over time. Gorilla Heavy Duty Tread Tape may be cleaned with a broom and appropriate, gentle cleanser as needed. Regularly inspect and maintain Gorilla Heavy Duty Tread Tape and replace as needed.

• Gorilla Heavy Duty Tread Tape is designed to provide durable traction to wet, slick or high traffic areas.
• The multiple layers of protective coating ensure long lasting, durable grit that lasts both indoors and out.
• Gorilla Heavy Duty Tread Tape is perfect for ladders, steps, ramps, boats, RVs, decks, and more!
• Durable Grit: Multiple Layers of Protective Coating
• Slip Resistant: Traction on Wet & Slick Surfaces

User questions & answers

Question:	Do You think this would stick to industrial style carpet? It is for use on a pet ramp that unfortunately has carpet
Answer:	I would use a few staples

Product description

This is a panel carrier for lifting and transporting heavy things. Made of high quality iron material, hard, tough and durable. High hardness, uneasy to broken. Ergonomic design allows one to carry heavy panels from the top with one hand. A soft handle is also equipped to relieve the pressure on the hand and greatly reduces the risk of injury to the back, neck, shoulders, arms and hands. Suitable for building industry use.



Feature:

Made of high quality iron material, hard, tough and durable. High hardness, uneasy to broken. Ergonomic design allows one to carry heavy panels from the top with one hand. Multifunctional: An unique tool for lifting and transporting tools, suitable for building industry use. Labor-saving: A soft handle is also equipped to relieve the pressure on the hand and greatly reduces the risk of injury to the back, neck, shoulders, arms and hands.

Spec:

Condition: Brand new

Material: Nylon + iron

Color: Black

Suitable range: Panel lifting

Handle length: 14.8cm/ 5.8in

Size: Approx. 12.3 x 12 x 20cm / 4.8 x 4.7 x 7.9in

   

Package list:

1 * Panel Carrier



Notice:

Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering. Please understand that colors may exist chromatic aberration as the different placement of pictures.

• Labor-saving: A soft handle is also equipped to relieve the pressure on the hand and greatly reduces the risk of injury to the back, neck, shoulders, arms and hands.
• Ergonomic design allows one to carry heavy panels from the top with one hand.
• Made of high quality iron material, hard, tough and durable.
• Multifunctional: An unique tool for lifting and transporting tools, suitable for building industry use.
• High hardness, uneasy to broken.

Product description

Description



This sheet gripper with simple design that allows the clamp to grip a variety of different kinds of panels and sheet goods. When you start lifting, the clamp automatically adjusts the width depend on the thickness of the panel or sheet.Ergonomic design for one person to lift and move sheet goods by one hand.



Features

Carrier gripper

-Color: Black.

-Material:Nylon and Iron.

-Size: 7.3x4.7inch/18.5x12cm.

Its ergonomic design allows one person to carry heavy sheet goods.



Package Including



1 * Carrier Gripper

• This carrier gripper adopt ergonomic design for one person,cushion-handle for all day comfort
• Our plywood carry handle equipped a soft handle,which is graet to relieve the hand pressure
• This panel carrier designed high hardness and uneasy to broken performance
• As soon as you start lifting, the carrier clamp automatically adjusts to the thickness of the panel or sheet
• Plywood Carry Handle greatly reduce the risk of injuries to back, neck, shoulders, arms and hands

Product description

WHY YOU DESERVE TO OWN AN AYZAW PANEL CARRIER



There are a lot of times we need to carry heavy things, especially when it comes to carrying with thorns and slippery panels, workers always get stabbed or scratched accidentally, and sometimes the sheet was too big to carry. Not only that, many workers often suffer from back pain because they often carry heavy plywood. In order to reduce their pain, we designed this easy-to-use and convenient drywall tools, which allows people to easily lift all kinds of sheet rock by gently placing the clamp on the top of them, which can improve efficiency and relieves the back pain. What are you still hesitating for, don't you wanna get a gripper that can save your energy and use it for long time? using plywood carrier now to save your time and effort.



Specification



☞ Meterial: The clamp is made from aerospace grade aluminum, and the grip is made from ABS resistant polymer.

☞ Color: Black + Silver

☞ Clamp Gap: 0"-1"

☞ Load Rating : up to 110lb

☞ Item Weight: 2.64 pounds



Suitable for Sheet



metal/plastic/plywood/drywall/MOD or MDF panels/melamine/slabs and table tops

• ♕【ONE-HAND CARRYING】 This gorilla gripper allows you to operate plywood with one hand. The clamp automatically adjusts to the thickness of the panel and catch it tightly as you lift. The self-adjusting gripper accommodates panel thicknesses of 0 to 1 inch.
• ♕【VERSATILE】 This plywood carrier handle can make people easily lift and carry panel goods like plywood, sheetrock and drywall . The clamp can hold up to two sheets or panels at once, Accommodating loads of up to 110 pounds.
• ♕【DURABLE】 Made of high-quality metal, this panel carrier clamp is strong and durable. The clamp and the handle arm are machined from aerospace-grade aluminum, while the joint is made from a solid steel bar. The handle itself is made of durable, impact-resistant ABS polymer, which can work for you for a long time.
• ♕【SAFETY】 This pro gripper can hold material tightly as you lift. The rubberized gripping pad attached to the clamp can increase friction and avoid scratches on the surface of panels.
• ♕【SAVE TIME AND ENERGY】 This drywall panel carrier is light and convenient to carry with. It takes the strain off your back and allows you to carry heavy materials with a single hand.

User questions & answers

Question:	It is suitable for 1/2" drywall? Will there be dents
Answer:	If you are working alone, you only need one. However, it also could work with 2 people each with their own carry handle.
Question:	Can it be used for glass
Answer:	The notches allow the molding machine access to the bottom part of the vertical shanks. While you're admiring this masterpiece, you might also wonder why the bottom of the shanks is recessed. It's so the bottom joint can be curved (take a look) without touching the panel. If this weren't done there would be a stress point there that would rapidly develop a crack.
Question:	What is the coating on the clamping surface? Will it damage hardwood veneer plywood
Answer:	It's too strong for regular drywall, only good for outdoor drywall
Question:	It is suitable for 1/2" drywall? dents? Is it easy to lift
Answer:	20 mm metric, 25/32” English measure. Just a tad over 3/4” works great on all domestic plywood and on Baltic birch.

Product features

Ayzaw plywood and sheetrock panel carrier

There are a lot of times we need to carry heavy things, especially when it comes to carrying with thorns and slippery panels, workers always get stabbed or scratched accidentally, and sometimes the sheet was too big to carry. Not only that, many workers often suffer from back pain because they often carry heavy plywood. In order to reduce their pain, we designed this easy-to-use and convenient drywall tools, which allows people to easily lift all kinds of sheet rock by gently placing the clamp on the top of them, which can improve efficiency and relieves the back pain. What are you still hesitating for, don't you wanna get a gripper that can save your energy and use it for long time? using plywood carrier now to save your time and effort.

Panel carrier ingredients

The splint and the handle arm are made of high-strength aluminum alloy, while the joints are made of solid steel rods, which are strong and durable

Panel carrier fixture composition

Special gripping pads installed on the two splints can protect the surface of the material from damage or damage, while increasing friction to prevent falling.

Panel carrier tools handle

The panel/plywood lifter has a durable, impact-resistant ABS handle. The surface is non-slip and wear-resistant. Soft rubber will not hurt your hands.

One hand carrying

This handy tool reduces the burden on your back and allows you to carry heavy objects with one hand. There is no need to bend down to lift the material from the bottom, just place the clip above the top edge of the material in the center of the board to achieve proper grip and balance, and then lift.

Adapt to the thickness of the board

The simple, yet versatile design allows the gripper to automatically adjust to different thicknesses up to 11/8 inch(30 mm)thick. The self-adjusting clamp holds materials tight as you lift. The clamp can hold up to two sheets or panels at once, accommodating loads of up to 110 pounds.

Applicable materials

The most innovative tools for lifting and carrying all kinds of plywood, panels, sheets, and stabs. Use the gripper to grip and carry MDO or MDF panels, OSB, melamine, drywall , tabletops, sheep metal, and other sheet goods.

Product description

93-301 Features: -Helps transport building boards and other flat materials with ease.-Better balance and control.-Better visibility while carrying.-Angled handle keeps hands away from panel for comfort. Dimensions: -14'' handle for extra reach.

The Stanley Panel Carry is designed to make it easy to hand-carry flat panels of wood and other materials. It features a 14-inch handle for extra reach, and it is designed for better balance, control, and visibility while carrying. Its angled handles keep hands away from the panel for comfort. The panel carry is a high-visibility yellow.

From the Manufacturer

The Stanley Works, originally a bolt and door hardware manufacturing company located in New Britain, Connecticut; was founded in 1843 by Frederick T. Stanley. A few years later, in 1857, Frederick’s cousin, Henry Stanley, founded The Stanley Rule and Level Company. In 1920, The Rule and Level Company merged with The Stanley Works and would go on to become it’s famous Hand Tools Division. Over the years, The Stanley Works has produced some of the most innovative and useful tools ever made. Among these tools are the Bailey Plane, the Surform shaper, the PowerLock tape rule and most recently the FatMax line of products. Today, more than ever, Stanley continues to be an industry leader in tool innovation. In 2001, Stanley introduced more than 100 new products, bringing to 400 the number of new products introduced in the past four years. As a direct result of Stanley’s commitment to excellence, Stanley was awarded the Prestigious Golden Hammer Award, presented for New Product Innovation in both 2000 and 2001.

• Panel carry helps you easily hand-carry panels of flat wood or other material
• Provides increased balance and control during transportation
• Angled handles keep hands away from panel for added comfort
• Comes in high-visibility yellow
• Includes 14-inch handle for extra reach

User questions & answers

Question:	What is the difference between 93-301 and 93-300 (other than color) which HD sells for
Answer:	From the directions sheet: "Low power indication: when the power is low, the red LED on the wireless presenter will flash slowly to remind the user to recharge the wireless presenter". How to know the battery is out of power? If the blue LED on the wireless presenter starts to flash slowly, it means the power is low and the battery needs to be recharged"Two different answers to the same question? I don't know, but there is a indicator light. We do not use it very much because it does not show on a HD TV monitor, which is why we bought it. I hope this helps.
Question:	How many panels can this carry? (Max thickness
Answer:	Hi, I just use this laser and see that it is really very powerful, the green dot is bright and - with my normal use - needs to be recharged only after cca 5 presentations. I copy here the specifications from the users manual for you. KristofVI. Specifications TransmitterTechnology: Radio FrequencyFrequency: 2.4GHzControl Distance: >100mLaser Class 3RMax Output: Laser Distance: >200mWavelength: 650nmBattery: 360mAh Polymer Lithium BatteryWorking Voltage: 3.7VSleep Current Dimension: 138*18*13mmWeight: 30gWorking Voltage: 5V DCDimension: 24.68*13.8*5.14mm Weight: 2.1g
Question:	Do you need two
Answer:	Yes, the GREEN laser is absolutely perfect! I've never seen a remote presenter with an IDEAL green laser pointer. Usually the lasers are worth less -- but this one is great.
Question:	Anyone know what the 2 3/4" notches are in the lip of the carrier base
Answer:	/Duration 0:13Loaded: 0.00%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:13 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } The star light is designed in USA, please look at the vedio.

Product description

Steel trucker's leveraging tool. "Gorilla Handle" is used to assist the trucker driver in closing and opening shipping container doors and van trailer doors even if the latch is worn or rusty. The "Gorilla Handle can also be used as a tire thumper and a 5th wheel pin puller.

User questions & answers

Question:	How long is it
Answer:	It is 22” long.
Question:	Will this fit on a Sontrax garden cart
Answer:	Can’t answer the question as the cart is an inaccessible area at this time. Sorry
Question:	What size bolt is needed to connect the handle to the wagon
Answer:	The one that came with the wagon
Question:	does it come with bolt or screws
Answer:	No, it doesn't. You have to buy the hardware kit for 7.00 or so. My old bolt hardware did not fit the new handle. I went to Home Depot and bought what I needed for couple dollars. Much cheaper than buying the hardware kit for only a couple of needed items.
Question:	Does this come with the coupling spacer I see in one reviewers picture
Answer:	Yes

Product features

Gorilla Carts GOR-HDL-DOS Replacement 2-In-1 Utility Cart MH2530 Handle

The Gorilla Carts GOR-HDL-DOS Replacement 2-in-1 Convertible Handle has a patented D shaped design that easily converts from a pull handle to a trailer hitch in seconds, allowing your cart to be pulled by hand or behind a lawn tractor or ATV. Gorilla Carts full line of products meet the needs of light-duty homeowner as well as the commercial-duty professional user by offering a wide variety of sizes and weight capacity carts.