14 best collated roofing nails
Collated roofing nails are specialized fasteners used in roofing applications to securely attach roofing materials, such as shingles or felt, to a variety of surfaces, including wood or plywood decking. The term "collated" refers to the nails being held together in a strip or coil, making them compatible with pneumatic nail guns or nailers. Here are some key features and considerations related to collated roofing nails:
Collation: Collated roofing nails are connected in a linear arrangement, typically held together with adhesive, paper, or wire. This collation allows for efficient loading into nail guns, enabling faster and more convenient installation.
Materials: These nails are commonly made from materials such as galvanized steel or stainless steel. Galvanized steel is often used to provide corrosion resistance, ensuring the longevity of the roofing structure.
Length and Gauge: The length and gauge (thickness) of collated roofing nails can vary depending on the specific requirements of the roofing material and the underlying structure. Common lengths range from 1 to 3 inches.
Coating: Collated roofing nails may be coated for additional protection against rust and corrosion. Common coatings include zinc, which provides a protective layer, and some nails may have additional coatings for enhanced durability.
Head Type: Roofing nails typically have a large, flat head to provide sufficient holding power and prevent the nail from pulling through the roofing material. The head type can vary, with options like round heads or large, flat heads designed to lay flat on the roofing surface.
Application: Collated roofing nails are specifically designed for roofing applications, including the installation of asphalt shingles, wood shakes, or roofing felt. They are suitable for use with a variety of roofing materials and substrates.
Compatibility with Nail Guns: One of the primary advantages of collated roofing nails is their compatibility with pneumatic nail guns. This feature allows for rapid and consistent nail placement, increasing efficiency and reducing manual effort.
Weather Resistance: Roofing nails are exposed to the elements, so resistance to weather conditions is crucial. The materials and coatings used in collated roofing nails help protect against rust and deterioration due to exposure to rain and sunlight.
Building Codes: When using collated roofing nails, it's important to comply with local building codes and regulations. Building codes may specify the type, length, and gauge of nails suitable for different roofing materials and applications.
Manufacturer Recommendations: Following the manufacturer's recommendations for the type and size of collated roofing nails is essential to ensure the structural integrity of the roofing system and to maintain warranty compliance.
When selecting collated roofing nails, it's advisable to consult with roofing professionals or follow the guidelines provided by the roofing material manufacturer. Proper installation using the right type and size of nails contributes to the overall performance and durability of the roofing system.
Below you can find our editor's choice of the best collated roofing nails on the market
BOSTITCH Roofing Nails, Wire Collated Coil, 1-1/4-Inch, Smooth Shank, 15-Degree, 7200-Pack (CR3DGAL)
Bostitch
Product description
Stanley Bostitch Cr3Dgl 7,200-Qty. 1-1/4" Smooth Shank 15 Degree Coil Roofing Nails Stanley-Bostitch Manufactures Top-Quality, Innovative Fastening Tools And Fasteners For Industrial, Construction And Home Improvement Applications. Products Include Pneumatic Staplers And Nailers, Compressors, Manually Operated Staplers And Tackers, Coil-Fed Screw Systems, Rivet Tools, Glue Guns, A Broad Assortment Of Collated Nails, Screws, Staples And Specialty Fasteners In A Variety Of Materials And Finishes, Plus Office Products And Carton-Closing Staplers - Many Of Them Industry Firsts. Stanley Bostitch Cr3Dgl 7,200-Qty. 1-1/4" Smooth Shank 15 Degree Coil Roofing Nails Features: Use In Roofing Nail Guns Rn45B (2750-5338), N12-B, And N12-1 15 º Roofing Nails Smooth Shank Galvanized Diamond Point Stanley Bostitch Cr3Dgl 7,200-Qty. 1-1/4" Smooth Shank 15 Degree Coil Roofing Nails Specifications: Fastener Length: 1-1/4" Finish: Glvanized Fits Bostitch Tools: Rn45B, Rn46 Atro: Cn134, Roofing Rollcraftsman: 18324, 154500 Hitachi: Nv 45Ab Jamerco: Jtcn-45R Fits Competitor Tools:Makita: An 451Max: Cn12R, Cn450Rpaslode: 3175Rcuporter Cable: Rn175Senco: Point Style: Diamond Quantity Per Item Pack: 7,200 Shank Type: Smooth
From the Manufacturer
Bostitch 15 Degree Coil Roofing Nail
- Country of Origin:China
- Package length:18.6"
- Package width:11.5"
- Package height:6.5"
User questions & answers
| Question: | Can i use this nail for porter cable rn175b roofing nailer |
| Answer: | The length of the CR3DGAL is 1-1/4" and the RN175B has a fastener range of 3/4" to 1-3/4" so it should work fine. |
| Question: | Do people use 0 degree coil nails? My roofer told me he doesn't use the 15 degree nails. Maybe I misheard him |
| Answer: | Most roofers use 15 degree coil nails. You didn't say why he said "he uses 0 degree coil nails". For asphalt shingles I only use 15 degree. For shaker type roofs I use either 15 or 0 degree with plastic inserts to keep splinters from flying back at me. |
| Question: | Will the nails fit dewalt roofing nailer dwfp |
| Answer: | Yes, the DWFP12658 uses nails in lengths of: 3/4" (19 mm) - 1-3/4" (44.5 mm). |
| Question: | how many boxes would I need to redo my garage roof, about 25 squares of shingles |
| Answer: | Most shingles come 3 bundles per square and 29 shingles per bundle with each shingle requiring at least 4 nails. So the math would say 3x25squares=75 bundles x 29 shingles=2175 shingles x 4 nails=8700 nails which I would increase by 20% for a total of 10,440 nails. Since a case contains 7200 nails, you will need two cases to complete the job and will have about a half of a case left over. |
B&C Eagle ACR-1 Round Head 1-Inch x .120 Smooth Shank Electrogalvanized Coil Roofing Nails (1,080 per box)
Product description
B&C Eagle collated fasteners are made to the highest quality standards and are guaranteed to work in tools for which they are intended. Our fasteners work with many brands of pneumatic tools like Bostitch, DeWALT, Senco, Paslode, Duo-Fast, Hitachi, Makita, Porter Cable and more. If your tool model number is listed below and our fastener fits within the size range of your tool, our fastener will work, guaranteed. We use only high quality collation materials and glues to keep the fasteners together before and during use. Use B&C Eagle fasteners for more positive drives, fewer jams and lasting quality. Please make sure you select the right coating for your application. Bright fasteners should only be used for interior applications in non-treated lumber. Hot Dip Galvanized fasteners are for interior or exterior applications in treated lumber. For the best corrosion protection available, always use Stainless Steel fasteners. Visit our website at www.bandceagle.com or give us a call for more technical information or if you have any questions on our fasteners. ***As of July 1st 2013 we've updated all of our packaging. Buy with confidence that you will receive our product shipped from AMAZON.COM intact. *** These fasteners are ENGINEERED TO FIT: B&C Eagle: CN45R, BEA: 554C, Bostitch: N12B, RN45B, RN46-1, Campbell Hausfeld: NC1545, RN164599AV, DeWALT: D51321, Duo-Fast: DRN-45, RN-175A, Hitachi: NV45AB, NV45AB2, NV45AB2S, NV45AC, NV45AE, Makita: AN451, AN453, Max: CN445R, CN450R, Paslode: 3175/44RCU, 3175RCU, R175C, Porta-Nails: 670, Porter Cable: RN175, RN175A, RN175B, Ridgid: R175RNA, Senco: ROOFPRO 450, ROOFPRO 455XP, SCN40R, Spotnail: VRN45, WEN: 61780, 61782. PLEASE CONSULT YOUR TOOL OWNER'S MANUAL FOR SIZE RANGES. For the most up to date list of tools this fastener is compatible with, please visit our website at www.bandceagle.com
From the Manufacturer
1 inch by .120 galvanized roofing coil nails fit the following nail guns: Hitachi NV45AB, NV45AB2, NV45AB2S; Bostitch N12B, RN45B, RN46B; Senco SCN200R, SCN40R; Makita AN451; Porter Cable RN175; DeWalt D51321; Paslode 3175R; Max CN450R.
- For use in 15 degree coil roofing nailers
- High quality standards prevent jamming allowing you to work faster
- Electrogalvanized finish helps resist corrosion and rust
- Smaller quantity box saves money and reduces waste. Reclosable box helps protect product during storage
- New and improved packaging helps protect product during shipment
User questions & answers
| Question: | are these collated nails |
| Answer: | Yes but they are for roofing,you need to use 11/2 nails for a fence. |
| Question: | Would these nails work on Cedar Fencing |
| Answer: | Made in China I used them for my storage building roof. |
| Question: | where are these made |
| Answer: | 1080. 9 coils containing 120 nails each. |
| Question: | How many nail in box |
| Answer: | It is going to be right at the 1" mark, so you will have over penetration. If you are going to insulate the roof itself rather than the ceiling, you should be OK. Also, if you really want great material to cover the sheathing before putting on the roofing material, use Titanium wrap rather than tyvek or black paper. It is so much better in so many ways, particularly because it really makes a great barrier and is not so slick that you can't stand on it. Hope this helps. |
Product features
American Fastening Systems, an American company
We've been selling our own brand of B&C Eagle fasteners all over the United States since 1995. We source our products from all over the world from responsibly maintained factories that follow our exact specification. We're dedicated to quality and our reviews don't lie. We stand behind our products and guarantee our product to work in tools for which they are intended.
Having trouble selecting the proper fastener for your tool or job? Contact us at our website and we'll be happy to assist you.
Metabo HPT 12108HPT Wire Coil Roofing Nails | 7/8" x .120" | Electro-Galvanized | Smooth Shank | Fits Hitachi Power Tools/Metabo HPT NV45AB2 Roofing Nailers | 7200 Count
Product description
Metabo HPT (formerly known as Hitachi power tools) offers an extensive line of professional grade power tools and accessories for woodworking, metalworking, drilling and fastening, concrete drilling and cutting, outdoor power equipment products as well as a complete line of pneumatic nailers, staplers, compressors and collated fasteners.
- Same fasteners. New name. Hitachi power tools has renamed to Metabo HPT
- Durable wire coil roofing nails
- Electro galvanized finish
- Smooth shank
- 7, 200 Count
User questions & answers
| Question: | where are these made |
| Answer: | A local tool repair shop |
| Question: | What degree angle are these, 15 degrees maybe |
| Answer: | The diameter is 0.12 inch |
Grip Rite GRCR19GAL 3/4" by 15° Wire Collated Galvanized Coil Roofing Nail (7, 200per Box)
Grip-Rite
Product description
Primary Applications include roofing and vinyl siding. Large 3/8 in. Smooth head for an increased bearing surface. For use with most 15 deg (Degree) Coil roofing nailers including bostitch, Craftsman, DEWALT, Duo-Fast, Hitachi, Makita, Max, Paslode, PORTER-CABLE, Ridgid, Senco. The product is manufactured in china.
From the Manufacturer
15° Coil Roofing Nails - Primary applications include attaching roofing shingles and vinyl siding. "High Wire" collation is compatible with the majority of coil roofing nailers on the market. Designed for use in these tools: Hitachi NV45A, NV45AC; Bostitch RN45B, RN46, N12; Paslode 3175/44RCU; Porter Cable RN175, RN175A; Senco SCN200R, SCN40r; Max CN450R and many more. Grip-Rite® brand fasteners from PrimeSource Building Products, Inc.
- Made of good quality products
- Select propellants that deliver consistent accuracy and performance
- Product is manufactured in China
User questions & answers
| Question: | The description doesn't give the gauge or width of the nail. 11 gauge? 0.12" ? What |
| Answer: | .118 thousands. 11.5GA |
| Question: | Are these nails compatible with Bostich roofing nailers |
| Answer: | China! |
| Question: | What is the gauge or width of the nail |
| Answer: | Not wanting to supply you with incorrect information, I checked both the Owners Manual and the tool itself for your requested information... Without any success! That said, I would guess that “your estimated angle of 15 degrees is accurate... I would, in the absence of any concrete information, say 15 to 20 degrees. More importantly, I found this nailer to be “capable” and “dependable”... it’s reviews reflect this... I was not disappointed! |
3/4" Smooth Galvanized Coil Roofing Nails 3.6M JobPak
Product description
3/4" SMOOTH GALVANIZED COIL ROOFING NAILS to Bostitch CR19GAL & Senco M003101
Make sure your tool model will accommodate 3/4" length.
For the best results we recommend using MAX CN450R, CN445R, CN445R2, CN445R3
PLEASE NOTE: Because of their extremely short length 3/4" coil roofing nails may tumble in the chamber when fired causing the nail to come out sideways. This cannot be prevented even with coil roofing nailers that claim to accept 3/4" length. Please be aware that 3/4" coil roofing nails may not fire accurately 100% of the time. If this is a concern please use 7/8" length.
Our Coil Roofing Nails are manufactured according to the roofing industry specifications. These nails are 3/4" length 15 degree wire collated with a head diameter of .375" (3/8" diam) Made of .120" (11 gauge) SMOOTH shank Electro Galvanized steel. Electro Galvanized steel provides a very thin layer of coating with a measure of protection against the elements. Over time these nails may corrode. Commonly used in composition asphalt shingles applications. Not recommended for ACQ Treated Lumber. Each Box contains approximately 3,600 nails.
Applications Include:
Asphalt and fiberglass shingles for both new roofs and reroofing. Also for attaching waterproof tar paper, roofing felt, metal drip edges, insulation board, cementitious fiber board products and vinyl siding.
- Please Verify Nailer Compatibility Before Ordering
- Fits only models accepting 3/4" length
- Electro Galvanized
- Smooth
- 3,600 count
User questions & answers
| Question: | Will these work in a Bostitch NR46 nail gun |
| Answer: | They don't feed well. I believe it's due to them being short. The grip rite 1 1/4 inch feed great. |
Nail Roofing Eg 5/8in 5lb
Product description
Pro-Fit 0132025 Roofing Nail, 11 ga x 5/8 in, Steel, Electro-Galvanized Use for asphalt shingles.
- Length : 5/8"
- Pkg. Size : 5 Lb
- Electro Galvanized
- Use for asphalt shingles
1 3/4" Ring 304 Stainless Coil Roofing Nails 600ct MiniPak
Product description
1 3/4" RING 304 STAINLESS COIL ROOFING NAILS similar to Primeguard MAX MXC62848 & Simpson S11A175RNBP
MiniPak. Just what you need for the smaller jobs! These Coil Roofing Nails have 3/8" (.375") diameter head, 15 degree wire collated, 1 3/4" length made of .120" (11 gauge) RING shank 304 Grade Stainless Steel. Use 304 Grade Stainless for outdoor applications to avoid nail corrosion and discoloration. Commonly used in composition asphalt shingles applications. Recommended for ACQ treated lumber, cedar and redwood. Ring shank nails, also known as annular thread, offer superior holding power and helps prevent nails from backing out over time. Each MiniPak contains approximately 600 nails.
Applications Include:
Asphalt and fiberglass shingles for both new roofs and reroofing. Also for attaching waterproof tar paper, roofing felt, metal drip edges, insulation board, cementitious fiber board products and vinyl siding.
- 304 Stainless
- 1-3/4"
- 600 count
Metabo HPT 12113HPT High Wire Coil Roofing Nails | 1-3/4" x .120" | Electro-Galvanized | Smooth Shank | Fits Hitachi Power Tools/Metabo HPT NV45AB2 Roofing Nailers | 7200 Count
Product description
Metabo HPT (formerly known as Hitachi power tools) offers an extensive line of professional grade power tools and accessories for woodworking, metalworking, drilling and fastening, concrete drilling and cutting, outdoor power equipment products as well as a complete line of pneumatic nailers, staplers, compressors and collated fasteners.
- Same fasteners. New name. Hitachi power tools has renamed to Metabo HPT
- Smooth shank for easy driving
- Electro galvanized to resist rust and weathering
- 7, 200 Count
1 1/4" Ring A153-D HOT DIP Coil Roofing Nails 3.6M Box
Product description
Similar to Maze CLWR102A & Steelhead GCR3DRHD
All our ASTM A153-D Hot Dip Nails meet and/or exceed the United States standard for Hot Dip Zinc Mass Coating of ASTM A153 class D Fasteners. HDG grade nails are first cut to length and heads formed from a large spool of brite steel wire rod. Then nails are Hot Dipped into Molten Zinc until a thick uniform coating is achieved across the entire surface of the nail. Next, the nails are either packaged in bulk or collated together into strips or coils. Our HDG Nails meet and or exceed the ASTM A153 Class D Fastener specification.
Manufactured according to roofing industry specifications; these HOT DIPPED nails are 15 degree wire collated, 1 1/4" length with a head diameter of .375" (approx. 3/8" diam) and .120" (11 gauge) RING shank. Ring shank nails, also known as annular thread, offer superior holding power and helps prevent nails from backing out over time. Commonly used in composition asphalt shingles applications. Meets the minimum requirement for ACQ Treated Lumber but is Not Recommended. For ACQ Treated lumber we recommend Stainless Steel.
Each box contains approximately 3,600 nails.
Applications Include:
Asphalt and fiberglass shingles for both new roofs and reroofing. Also for attaching waterproof tar paper, roofing felt, metal drip edges, insulation board, cementitious fiber board products and vinyl siding.
- Hot Dip Galvanized
- 1-1/4"
- 3,600 count
User questions & answers
| Question: | the description is confusing are these hot dip galvanized or are they zinc coated |
| Answer: | No. This item is made overseas. |
| Question: | Does the nail per code comply with both astm spec f1667 and a-153? can i get documentation for the inspector |
| Answer: | Yes these will work in the Bostitch RN46 Coil Roofing Nailer |
| Question: | Are the crn114rh 1-1/4 a 153-d hot dip coil roofing nails american made |
| Answer: | they look just like other roofing nails . i used my micrometer and it measures .118 thousands of an inch which is very close to 1/8 inch which is 11ga. so its gonna be .007 thousands from being a 11ga . its really right in the middle 11.5GA 11 ga is .125 thousand of an inch. 12ga is .109 thousands of an inch |
BOSTITCH CR2DGAL 1-Inch 15 Degree Smooth Shank Coil Roofing Nails (7,200 per Box)
Bostitch
Product description
2750-5486 Features: -Coil roofing nails.-Use in Roofing Nail Guns RN45B (2750-5338), N12-B, and N12-1.-Smooth Shank.-Galvanized.-Full round head.-Diamond point.-1''.-7,200 per box. Specifications: -15 wire collated.
From the Manufacturer
Bostitch 15 Degree Coil Roofing Nail
- Measures 1" in Length
- Smooth Shank
- Galvanized Finish
- Contains 7200 Nails Per Box
- For Use in the Bostitch RN46-1 Industrial Roofing Nailer
User questions & answers
| Question: | Are these hot dip galvanized or just electro galvanized |
| Answer: | Yes this item meets both ASTM A153-D and F1667. For submittal data please send us a request through email or by calling 877-593-2723. Thank you. |
1-3/4" Ring Galvanized Coil Roofing Nails 3.6M JobPak
Product description
1-3/4" Ring Shank Roofing Coil Nails, E.G.
Our Coil Roofing Nails are manufactured according to the roofing industry specifications. These nails are 1-3/4" length 15 degree wire collated with a head diameter of .375" (3/8" diam) Made of .120" (11 gauge) RING shank Electro Galvanized steel. Electro Galvanized steel provides a very thin layer of coating with a measure of protection against the elements. Over time these nails may corrode. Ring shank nails, also known as annular thread, offer superior holding power and helps prevent nails from backing out over time. Commonly used in composition asphalt shingles applications. Not recommended for ACQ Treated Lumber. Each JobPak contains approximately 3,600 nails.
Applications Include:
Asphalt and fiberglass shingles for both new roofs and reroofing. Also for attaching waterproof tar paper, roofing felt, metal drip edges, insulation board, cementitious fiber board products and vinyl siding.
- Electro Galvanized
- 1-3/4"
- 3,600 count
User questions & answers
| Question: | Are these Fasteners usable by a Bostitch brand coil roofing on |
| Answer: | Thanks for inquiring. Zinc is used to Galvanize nails. The term "Hot Dip" describes the process by which the zinc coating is applied. There are different methods of applying zinc in the Galvanizing process. For example one process is using Electricity to electrify the fastener causing a zinc coating to be deposited onto the surface; this method is known as Electro Galvanized. Another process is when fasteners are placed in a large rotary barrel along with zinc powder, special promoters, and glass impact media causing a zinc coating to be mechanically deposited onto the surface; this method is known as Mechanically Galvanized. So the answer to "are these hot dip galvanized or are they zinc coated" is yes to both. These nails are galvanized by dipping them into Hot Zinc which is known as Hot Dip Galvanized. Hope this explanation helps. |
1 1/4" Ring Galvanized Coil Roofing Nails 3.6M JobPak
Product description
FastenerUSA brand similar to Grip-Rite GRCR3DRGAL
Our Coil Roofing Nails are manufactured according to the roofing industry specifications. These nails are 1 1/4" length 15 degree wire collated with a head diameter of .375" (3/8" diam) Made of .120" (11 gauge) RING shank Electro Galvanized steel. Electro Galvanized steel provides a very thin layer of coating with a measure of protection against the elements. Over time these nails may corrode. Ring shank nails, also known as annular thread, offer superior holding power and helps prevent nails from backing out over time. Commonly used in composition asphalt shingles applications. Not recommended for ACQ Treated Lumber. Each Box contains approximately 3,600 nails.
Applications Include:
Asphalt and fiberglass shingles for both new roofs and reroofing. Also for attaching waterproof tar paper, roofing felt, metal drip edges, insulation board, cementitious fiber board products and vinyl siding.
- Electro Galvanized
- 1-1/4"
- 3,600 count
1 3/4" Ring A153-D HOT DIP Coil Roofing Nails 3.6M Box
Product description
1-3/4" RING A153-D HOT DIP COIL ROOFING NAILS similar to Maze CLWR104A & Steelhead GCR5DRHD
All our ASTM A153-D Hot Dip Nails meet and/or exceed the United States standard for Hot Dip Zinc Mass Coating of ASTM A153 class D Fasteners. HDG grade nails are first cut to length and heads formed from a large spool of brite steel wire rod. Then nails are Hot Dipped into Molten Zinc until a thick uniform coating is achieved across the entire surface of the nail. Next, the nails are either packaged in bulk or collated together into strips or coils. Our HDG Nails meet and or exceed the ASTM A153 Class D Fastener specification.
Manufactured according to roofing industry specifications; these HOT DIPPED nails are 15 degree wire collated, 1 3/4" length with a head diameter of .375" (approx. 3/8" diam) and .120" (11 gauge) RING shank. Ring shank nails, also known as annular thread, offer superior holding power and helps prevent nails from backing out over time. Commonly used in composition asphalt shingles applications. Meets the minimum requirement for ACQ Treated Lumber but is Not Recommended. For ACQ Treated lumber we recommend Stainless Steel. Each box contains approximately 3,600 nails.
Applications Include:
Asphalt and fiberglass shingles for both new roofs and reroofing. Also for attaching waterproof tar paper, roofing felt, metal drip edges, insulation board, cementitious fiber board products and vinyl siding.
- Hot Dip Galvanized
- 1-3/4"
- 3,600 count
User questions & answers
| Question: | Will these nails work in a WEN 61782 nailer |
| Answer: | Yes these will work. Thanks for inquiring! |
| Question: | Are these roofing nails? Or fence nails as someone commented |
| Answer: | Yes these will work. |
| Question: | Will they work in a ridgid r175rn |
| Answer: | Electro Galv |
NATIONAL NAIL 132049 Pro-Fit 0132049, 11 Ga X 7/8 in, Electro-Galvanized collated-Roofing-Nails
Product description
Roofing Nails are manufactured with quality materials and an efficient design ensuring a superior holding power, from a brand the professionals use. Features an electro galvanized finish for added protection against rusting and weathering. Ideal for securely attaching asphalt shingles. Product measures 7/8".
- Country of Origin: China
- Item Weight: 25.0 lb
- Product Dimension: 11.0" x 11.0" x 9.0"
Latest Reviews
View all
Bose Noises
- Updated: 12.06.2023
- Read reviews
Scholastic Kids Chapter Books
- Updated: 22.03.2023
- Read reviews
Bundt Cake Pans
- Updated: 19.07.2023
- Read reviews
Sewing Machine For Doll Clothes
- Updated: 26.04.2023
- Read reviews
Kerastase Hair Milks
- Updated: 14.05.2023
- Read reviews