14 best hollow wall anchors

• ▲Size - 1/8SDx35mm, 1/8SDx46mm, 1/8SLDx59mm, Total 3 most used sizes, different sizes can meet your different needs.
• ▲Material - High quality zinc plated carbon steel, rust resistance and corrosion resistance, durable enough for you to hanging items
• ▲Design - Heavy-duty hollow drive wall anchor expansion when installing, providing strong bearing capacity and safety
• ▲Applications - Widely used in drywall, hollow block, plaster, tile, perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches
• ▲Package Include - 52 PCS 3 Sizes total in a sturdy Transparent Plastic Case, Easy to Store. Besides, the box can be used for a storage box.

User questions & answers

Question:	How big of a difference is the performance with these vs the traingular winging anchors?\
Answer:	No special installation tools are needed. You drive it in the sheetrock with a hammer then tighten the screw with a screwdriver (or power driver) to set it. If you are using it in anything other than gypsum board you will have to pre drill a hole the size of the anchor body.
Question:	Do I need the install tool? Or will a screwdriver work to fully anchor them
Answer:	Typically left in place. Cover the holes with spackling after the screws are removed.
Question:	If you need to remove the anchor down the road, how is it done
Answer:	I suppose you can
Question:	Can you install the bolt and screw then at a later remove the screw and use it in the same insert (bolt) again
Answer:	Details in description. They’re many sizes. My tv. 50” VIZIO

Product features

ISPINNER 52pcs Zinc Plated Steel Long Hollow Wall Drive Anchor Screws Assortment Kit for Drywall (35mm 46mm 59mm)

Heavy-duty hollow drive wall anchor expansion when installing, providing strong bearing capacity and safety.

Made of high quality zinc plated carbon steel, rust resistance and corrosion resistance, durable enough for you to hanging items.

DESIGN

Heavy-duty hollow drive wall anchor expansion when installing, providing strong bearing capacity and safety.

WIDE APPLICATION

Widely used in drywall, hollow block, plaster, tile, perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches

• 🏡1.Best Quality Drywall Anchors, Pre-drills precise hole in gypsum wall board - No hole preparation required,Starts easier than other self-drilling drywall anchors
• 👉2.The plastic material anchors are very durable and not easy to be broken, drywall self-drilling screws kit is made of high quality stainless steel, which features is strength and offers good corrosion resistance in bad environment like high temperature, cold weather, and high humidity areas. They have superior rust resistance and the excellent of oxidation resistance, which can ensure long time using and prolong screws lifespan.
• 💕3.The split in the ribbed anchors expand on two opposing sides as you tighten the screw , increased holding power,Anti-rotation structure design of the expansion sleeve, tighten the screw will not be followed in the drilling rotation.
• 💪4. These drywall anchors and screws is perfect for hanging a wall shelf in fairly soft drywall. You can use the kit to hold your blinds or shelf, and the ribs on the plastic drywall anchors prevent the anchor from turning in the hole during installation.
• 🎁5. After-Sales Service，We wants you to be absolutely happy with our products. You will get 100% customer support for this product. For better shopping experience, if you have any questions, please feel free to contact us.

User questions & answers

Question:	Will these work on 1/4" drywall
Answer:	It's slightly over 1/2 inch or .520
Question:	What is the diameter of the head of the anchor
Answer:	Yes
Question:	Are these good for hanging oil paintings on a plaster wall
Answer:	I would think they would be great for curtains. I found them to be way too big for all applications that I had and they go unused in my garage. These are huge anchors. Way too big for just a normal picture.
Question:	I just want to hang curtains without the screw pulling out of the wall. Will this work with the ordinary curtain rod bracket
Answer:	Easier to work with I believe same results

Product features

Product description:

Material: plastic + steel

Quantity: 30 plastic anchor + 30pcs screw (total 60pcs)

Product Name: Plastic expansion plug

Size: 1.18*0.8*1.9in/0.29in

Color: White

Features:

Gypsum board wall and hollow wall installation tools are also suitable for installation and hanging of ordinary wall surface, mainly used in gypsum board hollow wall, and can also hang each item.

Use thick and hardened pure nylon material, the nails are standard, high quality, safe and secure

Product description

Swpeet Both Slot Headed and Phillips Headed Drive Bolts.



Sizes: 1/8", 3/16" and 1/4".



Toggle Wing Nut Dimensions：

1-9/16" x 1/16" x 3/8" (L x W x H) (10pcs),

2" x 9/16" x 1/2" (L x W x H) (8pcs),

2-1/8" x 11/16" x 9/16" (L x W x H) (6pcs).



Package included:

1/8" x 10pcs

3/16" x 8pcs

1/4" x 6pcs

User questions & answers

Question:	Hd suggested these for bar in shower to grab onto. Going through tile grout and wire mesh. Thinking 3 on each end so 6 total. Will that be strong
Answer:	Yes ... great!!
Question:	Will they work on the thin vinyl planels of mobile home walls
Answer:	I don’t know definitively but the bolts are very sturdy
Question:	How much weight can each one hold
Answer:	Each on is different. Back the screw our to it is just in the hinge. Then you can strighten toggle out alignen with the screw. This is the smallest it can get. Measure the toggle at the hinge. Remembet it is squar and it has to fit in a round hole so make it a little bigger.
Question:	How big do the holes have to be to insert the folded toggles
Answer:	There's a lever inside of the handle against the blade to hold it in place. If you can push it to the left with your thumb, you will be able to close it easily

User questions & answers

Question:	Is the end of the anchor suppose to open up like a mouth after you drill into it? Because its not happening for me
Answer:	These are fantastic for anything that is 50lbs. or less. Predrill a small hole with a straight drill bit. Predrilling the hole makes it so very easy. Next screw in the plastic anchor. Work on 1 side at a time - but be sure you use a level to hang it straight. Next place the curtain rod...then the metal screw. You can be sure that when you open your curtains there is a lot of strength holding them up.
Question:	I just want to hang curtains without the screw pulling out of the wall. Will this work with the ordinary curtain rod bracket
Answer:	50lbs each. So you are good to 100lbs. Great anchors!
Question:	I want to hang a 6 ft dry erase board that has two mounting brackets that weighs about 30-50lbs. What is this items weight rating
Answer:	If you have studs, but they are not where you want to hang the TV, do this: Use a 1 x 4 and mount that to the available studs.then, use regular screws to mount the TV to the 1 x 4. So, for instance, if you have a stud every 16 inches, you would use a 36" piece of 1 x 4, and mount that to three studs, each stud being 16" center to center. Then, mount the TV to the 1 x 4.
Question:	Any chance i could use these for a tv wall mount? no studs available
Answer:	Made of cheap plastic ! The screw in dry wall anchors kept breaking as I was putting them in the wall.

Product features

Built to Last

Our drywall anchors are meticulously crafted from the premium quality plastic material. The durable plastic material ensures that these anchors will last you for years.

Strong Ribs

These anchors come with strong ribs that help them to stay in a stable place on the drywalls. They can easily penetrate into thick or thin drywall and doors.

No Hole Preparation Required

Say goodbye to hole preparations! You do not need any drilling machine to prepare the hall in the wall to fix these drywall anchors.

Product description

Hollow wall drive anchor. Greater holding power than nails or screws in hollow walls. Fixtures can be removed or replaced without removing anchor. 5/16" Drill diameter. For static loads use one-fourth (25%) of the ultimate tensile & shear strengths shown. 40 psi allowable tensile strength in 1/2" drywall

• Hollow wall drive anchors do not require pre-drilling - drive into walls in seconds
• Zinc Plated Steel
• 1/8" Diameter
• 38mm Length
• For 1/2" inch wall thickness

User questions & answers

Question:	How Mouch would it hold
Answer:	Not at all. Like someone else said they snap when tightening and i was just using hand tools. I think i got 1 in 6 to not break. Some of them also dont have good spikes on the washer to the hollow part just spins in the plaster walls.
Question:	Do these work well for plaster walls
Answer:	These are drive-point and don't need to be pre-drilled when used with drywall. You can hammer them in like a nail.
Question:	what size hole should you pre-drill for these
Answer:	#6
Question:	What is the size of the screw
Answer:	They don’t work at all - very cheap plastic the strips out

User questions & answers

Question:	Can i use these in metal studs
Answer:	Large anchor maximum bear weight: 50lbs and mini anchor maximum bear weight: 35lbs.
Question:	whats the maximum weight it can carry, please
Answer:	Will depend on drywall strength, thickness and how well you put the anchor in so I don't know if there is a rated type of number. Would also depend on the load you hang on it and if it strictly a shear force or some sort of pullout type of loading. Most of these seem to take 20-30# of hanging weight in a shear type of loading if the item doesn't have a lot of dynamic (moving) type of loads on it like a grab bar or something similar.
Question:	What is the weight limit for each size
Answer:	Mine are holding up shelves 5-10 pounds and still holding fine.

Product features

ISPINNER 140pcs Drywall Anchors Plastic Self Drilling Hollow Wall Anchors with Screws Assortment Kit (13x42mm + 15x33mm)

Plastic (nylon) drywall anchors and Stainless Steel Screws ensure long time use.

Meticulously crafted from the premium quality plastic material.

The durable plastic material ensures that these anchors will last you for years.

NO DRILL NEEDED

ISPINNER Self-Drilling Drywall Anchor does not require a pre-drilled hole in gypsum wall board.

• Starts easier than other self-drilling drywall anchors
• Deep thread design provides strong engagement in 3/8", 1/2" or 5/8" gypsum wallboard
• Pre-drills precise hole in gypsum wall board - No hole preparation required
• Constructed from durable plastic to last for years. Can be easily removed
• Kit Includes 20 Plastic Anchors, 20 #8 x 1-1/4'' Phillips Screws and a Plastic Case, Hangs up to 50 lbs

User questions & answers

Question:	Will this fit a 1/4"-20 X 1-1/4" screw? I can not find something to match this size. Thank you
Answer:	If you are drilling directly into a stud you do not need to use the plug. The plug is for walls that will not support the weight of a shelf or heavy object with just a screw and need the plug to hold the screw in place. You need to use a drill bit to make the hole and screw the plug in if there is no stud to support the screw alone. Then the screw can go through the bracket into the plug.
Question:	can these drill through a stud
Answer:	They are designed for and come with number 8 wood screws. The 6 drywall may be loose but would go in. Depends on your project.
Question:	Will these hold with a number 6 drywall screw
Answer:	Just run them in using a phillips screwdriver or a cordless drill/driver with phillips insert bit. A pilot hole makes starting them easier, and be careful to avoid studs. Be careful when running the supplied phillips screw into the anchor, they're a bit too big and can tear the plastic anchor loose from the drywall.
Question:	how to install self drilling drywall anchors
Answer:	I'm afraid they cannot be used in metal studs. These anchors come with strong ribs that help them to stay in a stable place on the drywalls. They can easily penetrate into thick or thin drywall and doors. Large anchor maximum bear weight: 50lbs and mini anchor maximum bear weight: 35lbs.

Product description

Glarks heavy duty high quality molly bolt drive hollow drive wall anchor screws assortment kit



【Specification:】

Product type: Molly bolt drive hollow drive wall anchor

Meterial: Zinc plated steel

Size: 1/8SDx35mm, 1/8SDx46mm, 1/8SLDx59mm



【Feature:】

♠ Zinc plated on the surface can keep them from rust and corrosion

♠ Heavy-duty hollow drive wall anchor expansion when installing, providing strong bearing capacity and safety

♠ Suitable for a wide range of thicknesses of hollow walls



【Package: 】

1/8SDx35mm ------------ 20pcs

1/8SDx46mm ------------ 20pcs

1/8SLDx59mm ---------- 20pcs

Total: 60pcs



【Note:】 A pre-drilled hole is required for installation



【Application:】

Widely used in drywall, hollow block, plaster, tile, perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches

• ♛ Product Type: High quality heavy duty molly bolt drive hollow drive wall anchor screws assortment kit.
• ♛ Package: In this kit, it include 3 size of 1/8SDx35mm, 1/8SDx46mm, 1/8SLDx59mm each for 20pcs, total 60pcs drive wall anchors packed in a durable plastic box, convenient for your use and storage.
• ♛ Quality: All the anchors are made of high quality zinc plated carbon steel, rust resistance and corrosion resistance, durable enough for you to hanging items.
• ♛ Feature: Heavy-duty hollow drive wall anchor expansion when installing, providing strong bearing capacity and safety.
• ♛ Application: Widely used in drywall, hollow block, plaster, tile, perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches.

User questions & answers

Question:	could these be used in a shower to mount hooks or similar
Answer:	I dont believe that there is 3/8" sheetrock
Question:	what is the right size to grip 3/8" hollow drywall
Answer:	Yes they can be used on most material that is up to 5/8" thick
Question:	Can these be used in 1/2" drywall
Answer:	It’s not how they work. You actually use the screw to set the anchor. Go to YouTube and search molly bolt installation to see what I mean
Question:	Can the screw be removed from the anchor prior to install
Answer:	I don't think so. The screws that come with it are #8 x 1-1/4'', and #8 is generally described as 5/32, which is considerably smaller than 1/4 (which would be 8/32).

Product description

The Best Product to Save Your Time and Money!

Uses: for screws fixed on the wall, strong bonding

Scope of application: Gypsum board, fiberboard, hollow board, etc., for curtains, lamps, cross stitches, frames, frames, ornaments, decorative pieces, etc.

Product description:

Material: plastic + steel

🛒 Quantity: 30 plastic anchor + 30pcs screw (total 60pcs)

Product Name: Plastic expansion plug

Size: 1.18*0.8*1.9in/0.29in

Color: White

Features:

Gypsum board wall and hollow wall installation tools are also suitable for installation and hanging of ordinary wall surface, mainly used in gypsum board hollow wall, and can also hang each item.

Use thick and hardened pure nylon material, the nails are standard, high quality, safe and secure

Note:

1)The colors may have difference as the different display, please understand.

2)Please allow 1-2mm error due to manual measurement, please make sure you do not mind before you bid.

👌QUALITY GUARANTEE: If there is any quality problem, please feel free to contact us. Refund or Replacement for any quality problem.

• ⭐1.PREMIUM MATERIAL: The screws are made of high quality Drywall Anchors,not easy to be broken,good toughness, high expansion and impact resistance.cold weather, and high humidity areas. They have superior rust resistance and the excellent of oxidation resistance. 🌟
• 💖 2. EASY TO INSTALL:The split in the ribbed anchors expand on two opposing sides as you tighten the screw , increased holding power,Anti-rotation structure design of the expansion sleeve, tighten the screw will not be followed in the drilling rotation.🌟
• 🌞 3.AND PROPER SIZE:The package contains 30 set of plasterboard wall expansion plugs and screws,which is sufficient for your daily use.Meanwhile,the length of this screw is about 2.08in/53cm and the diameter of its thread is appro.The size of this expansion plug is approx.1.4in(3.6cm) x 1.3in/3.2cm(Width x Height). 🌟
• 🏠 4.Various application: Wall Anchors –Anchors Plugs Kit is suitable for hanging a wall shelf in soft drywall; It can also hang bathroom and kitchen accessories like shelving, light fixtures, mirrors, picture frames, lights, consoles, ledges, and more. 🌟
• 🎁 5. Good after-sales service: You can find more personalized gifts in our shop. We maintain a high standard of excellence. If you unfortunately encounter product damage when receiving the goods, please contact our customer service send us an email immediately, we will give you replacement service.Your satisfaction is very important to us! 🌟

User questions & answers

Question:	Is the end of the anchor suppose to open up like a mouth after you drill into it? Because its not happening for me
Answer:	which are hard to bend and break and very durable.
Question:	Are these drywall anchors strong
Answer:	anchors and screws. screws also come in 2 different sizes. 30 plastic anchor + 30pcs screw so, 60 pieces of anchors plus screws
Question:	It says 60 pieces. 60pieces of just anchors or anchors plus screws
Answer:	Quantity is 30 plastic anchor + 30pcs screw (total 60pcs)
Question:	what is the amount pcs? Title 30pcs? Choose 60pcs
Answer:	They work great in drywall, and would be water tight in drywall not to sure about other surfaces

• High quality anchors pre-drills precise hole in types of drywall - No hole preparation required, Constructed from durable zinc to last for years. Can be easily removed
• Deep thread design provides strong engagement, locks into many sizes of drywall (⅜", ½",⅝") for maximum holding power. Starts easier than other self-drilling drywall anchors
• Large Anchor holds up to 50 lbs, good for heavier applications such as big pictures, shelves, and artwork.
• Mini Anchor holds up to 40 lbs, leaves smaller footprint, good for applications where anchor needs to be hidden
• Kit includes 25 Large Anchors, 25 Mini Anchors, 25 #8 X 1-¼” screws, 25 #6 X 1-¼” screws.

User questions & answers

Question:	I have 4,12 inch z bars on 82x42 mirror 2 on the left 2 on the right side all together 12 holes think 4 holes will go to a stud but need 8 anchors
Answer:	I would use something much stronger for a grab bar, not these.
Question:	Will these work in tile in the shower for a grab bar
Answer:	I agree with the other commenter. It probably would be wise to drill a pilot hole before sinking these anchors in a plaster wall.
Question:	Would these work with plaster walls
Answer:	Yes, the anchors are open. These are great: sturdy, easy to install - no drill needed. I'll never buy the plastic ones again.
Question:	Are the anchors open on the end so the screw tip can pass through
Answer:	No, it's not designed to open at the end. The threads holds it tight in the drywall.

Product description

Ez anchor, 50 pack, #75 self drilling plastic drywall anchors.

• Highly durable
• Country Of Origin: Taiwan, Province Of China
• Model Number: 25310
• Item Package Dimension: 2.63" L x 3.75" W x 6.5" H

User questions & answers

Question:	So do you hammer them in or screw them in first
Answer:	Yes, you can screw them flush with the anchor.
Question:	Can the screws be tightened until they are all the way flush with the anchor? If not, how much is the gap
Answer:	Screws are included in the package. The screw is 1" 1/4 in length.
Question:	is screws included in the pack? What is the length of the screw
Answer:	Unfortunately the Amazon photo is out of date. This package comes with 50 screws and 50 matching anchors and supports 75 lbs per screw/anchor. These are absolutely amazing and work better than any other plastic drywall anchors I've ever seen. The plastic is very hard meaning you really don't need to pre-drill. I highly recommend these!!
Question:	I find the advertising very deceptive. The thumb shows 75lb capacity while the detailed description shows the 50lb capacity version. Which ru selling
Answer:	Not sure what the question is, but it sounds like you need 8 anchors since 4 holes would go into studs.

Product description

【Specifications】

- Material: Zinc plated steel

- Style: Hollow drive wall anchor screws

- Size: 1/8SDx46mm



【Features】

- Heavy-duty hollow drive wall anchor expansion when installing, providing strong bearing capacity and safety

- Made of high quality zinc plated carbon steel, rust resistance and corrosion resistance, durable enough for you to hanging items

- Widely used in drywall, hollow block, plaster, tile, perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches



【Package Included】

1/8SDx46mm ---------------------30pcs



Warning: the product are small parts, keep away from children and kids.

• ▲Size: 1/8SDx46mm
• ▲Material: High quality zinc plated carbon steel, rust resistance and corrosion resistance, durable enough for you to hanging items.
• ▲Design: Heavy-duty hollow drive wall anchor expansion when installing, providing strong bearing capacity and safety.
• ▲Applications: Widely used in drywall, hollow block, plaster, tile, perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches.
• ▲Package Include: 30pcs in a sturdy transparent plastic case, easy to store. Besides, the box can be used for a storage box.

Product description

• Hollow-door anchor provides a firm hold from within hollow-core doors and thin panels 1/8" to 1/4" thick
• Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
• Made in USA, and includes #8 x 1-1/4" screws
• Ultimate tensile strength is 124 lb. in 1/4" plywood with a #8 x 1-1/4" screw
• Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)

User questions & answers

Question:	I live in a mobile home with very thin walls and want to install some large ikea shelves. Will these work? I will need to intall about 16 anchors
Answer:	Yes, if the mirror is not too heavy. The little standoff mirror clip screws can screw into the anchor screw holes. There should be six or eight mirror clips to hang a standard full length mirror, spaced around the perimeter. I would not try to hang a mirror with a hanging wire on the back using these anchors. See https://www.amazon.com/dp/B07H9NC9SF/ref=twister_B07PJR4TP1?_encoding=UTF8&th=1 And substitute the toggler hollow core anchors for the ones provided which work in drywall.
Question:	Will these work to hang a mirror on a hollow core door
Answer:	These are intended for hollow core doors. A fiberglass entry door isn't usually hollow, so I don't think the "wings" would be able to open properly. It's a great product, but I'm not sure it will work for your application. I'd suggest a conventional anchor that expands and grips the hole when the screw is tightened.
Question:	Would this work on a fiberglass front door to secure a 3lb roman shade
Answer:	No. Use the AF8 Alligator Anchor to secure hinges in a door jamb. I just finished doing the exact same thing and they worked great.
Question:	These look like they're designed to hang stuff on a door, will they work on the hinges
Answer:	screw in.

Product description

CONFAST Nylon Self-Drilling Drywall / Hollow-Wall Anchors are self-drilling drywall anchors and provide excellent holding value and greater capacity than screws alone. This anchor cuts threads into drywall, greatly increasing the bearing surface and strength of the fastening. Strong Zip Tip does not sheer off when self-drilling.

Starts easier than other drywall anchors and can be removed easily.

Package Include the following:

100 Piece nylon self-drilling drywall Anchors

100 Piece #8 screws

• High quality anchors pre-drills in drywall and gypsum - No hole preparation required, Constructed from durable zinc to last for years. Can be easily removed.
• Deep thread design provides strong engagement, locks into many sizes of drywall (⅜", ½",⅝") for maximum holding power. Starts easier than other self-drilling drywall anchors
• Large #8 Anchor holds up to 50 lbs maximum sheer in 1/2" drywall, good for heavier applications such as big pictures, shelves, and artwork.
• Easy to remove and reinstall.
• Quick, Hassle Free Installation.

User questions & answers

Question:	the description says zinc, the spesification says nylon, the picture is nylon. witch is it
Answer:	Yes, those should work fine in this case.
Question:	How long of #8 screws can i use? I have #8 screws that are 1" long , will they drill in all the way
Answer:	Drill a hole about 'half the size' of the nylon self drilling piece. Example...if it is a 1/4" threaded nylon piece, drill a hole into the wall about 1/8 inch to 3/16". Then, drill the nylon insert into the hole you drilled. The provided screws will then be drilled into the insert.
Question:	Please directions for use got 100 but no directions. drill a hole first? what size? just tao in with a hammer? screw in
Answer:	The anchor is ½" in x 1-5/8" The screw is one inch long
Question:	What are the dimensions of the anchor and how long are the #8 screws that come with them
Answer:	Is the mobile home permanently parked? If not, do not do this. The wall finish is probably 1/4" masonite, which will work with the anchors, but the whole panel might come down with any significant load, if the anchors themselves do not rip out. Mobile homes normally have 2x3 vertical stud wall framing behind the masonite, but it is hard to locate the studs without removing the panel. There are also bundles of wire back there, so be careful. You can use normal wood screws to that wood framing. The wiring is protected by metal plates - do not drill through anything that is really hard.