10 best drive anchors
Drive anchors are a type of fastener used in construction and industrial applications to secure objects to concrete, masonry, or other solid surfaces. These anchors provide a reliable and sturdy means of attachment, ensuring that structures or equipment remain securely in place.
Here are some key points about drive anchors:
Material Composition: Drive anchors are typically made from materials such as steel or stainless steel, providing strength and durability. The choice of material depends on the specific application and environmental conditions.
Design and Structure: Drive anchors are designed with a threaded or ribbed exterior to enhance their grip within the concrete or masonry. The end that is driven into the base material may have a pointed tip to facilitate easier insertion.
Installation Process: The installation of drive anchors involves driving the anchor into the pre-drilled hole in the base material. This can be done using a hammer or a specialized tool, depending on the anchor type. As the anchor is driven in, it expands within the hole, creating a tight and secure fit.
Applications: Drive anchors are commonly used in a variety of applications, including attaching structural elements, securing equipment, and mounting fixtures. They are frequently employed in construction projects, such as the installation of handrails, brackets, and other fixtures into concrete or masonry surfaces.
Types of Drive Anchors: There are different types of drive anchors available, each designed for specific applications. Some common types include wedge anchors, sleeve anchors, and hammer drive anchors. The choice of anchor type depends on factors such as load requirements and the base material.
Load Capacity: The load capacity of drive anchors varies based on factors like the anchor size, material, and installation method. Manufacturers provide guidelines for the maximum load that an anchor can support.
Considerations: It's essential to consider factors such as the depth and diameter of the drilled hole, the quality of the base material, and the required load capacity when selecting and installing drive anchors. Following manufacturer recommendations and guidelines is crucial for ensuring proper installation and performance.
In summary, drive anchors play a crucial role in providing secure fastening solutions in construction and industrial settings.Their design and installation make them effective in creating a stable connection between structures and various surfaces.
Below you can find our editor's choice of the best drive anchors on the market
CONFAST 1/4" x 3" Hammer Drive Nail in Anchor (100 per Box)
CONFAST
Product description
Applications
The anchor is made from ZAMAC. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Dry environment.
Hole Diameter/Bit Diameter
The anchor requires a 1/4" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Diameter of Anchor
The diameter of the anchor is 1/4".
Length Anchor
The length of the anchor is 3"
Minimum Embedment
The minimum anchor embedment into the concrete is 3/4". Therefore, the anchor must be installed so that a minimum of 3/4" of the anchor is embedded into the concrete.
Spacing between Anchors
Each anchor must be spaced a minimum distance of 2-1/2" from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 1-1/4" from an unsupported edge of the concrete.
- INSTALLS INTO A VARIETY OF BASE MATERIALS-Can be used in a variety of applications making job easier and faster
- ANCHOR DIAMETER EQUALS HOLE DIAMETER-Makes it easy to determine hole size
- ALL SIZES PACKAGED 100 PIECES PER BOX-Quantity makes it easier to purchase and use
- PERMANENT FASTENING-Once installed, fastener cannot be removed, very secure
User questions & answers
| Question: | What can you use to pound these in, when a hammer won’t fit in a certain smaller space |
| Answer: | I suppose that would depend upon where you speared the fish, but I doubt it would work effectively as you would have to bend the loop much straighter to get it through any hole. I have kept 60# catfish on this stringer by poking it trough the chin and coming out the mouth. In the past I used to string it through the gill and out the mouth but I discovered this method too frequently injured or ripped out the gill causing premature death of the fish due to blood loss. |
| Question: | Can it be use in PT wood |
| Answer: | 5/16Very strudy |
| Question: | Are they 3 inches overall length or is this a 3 inch fastener |
| Answer: | Hello, The clip is 15.7 inches long according to the product dimensions. Please let us know if we can help any further. Trinitti HouseofScuba |
| Question: | how much does the mushroom top stick up above the surface? We want to use this for Versetta Stone which requires .1 inch above the bracket or less |
| Answer: | It should be plenty big enough for that. As for tying it to the boat, you should be able to fashion something to connect it easy enough. |
Hammer Drive Nail in Anchor 1/4" x 2" (20 pcs) for Concrete, Masonry, Brick by Makers Bolt - Made in USA
Makers Bolt
Product description
The hammer drive nail in anchor is used for medium-duty and tamper-proof applications to secure an object into concrete, brick, or block. It's a two piece anchor with a corrosion resistant die-cast zinc alloy anchor body and a steel nail.
Makers Bolt hammer drive nail in anchors are proudly made and packaged in the USA.
Installation Instructions:
- Drill a 1/4" pilot hole into the base material. Drill to a depth of 1/4" deeper than the anchor. Example: 1/4" x 2" anchor needs a 1/4" dia pilot hole 2-1/4" deep.
- Insert the hammer drive nail anchor through the object you need to affix and insert both together into the hole. Note: Size the anchor appropriately by ensuring a minimum of 3/4" embedment of the anchor into the base material.
- Tap, using a hammer, until firmly set.
- 1/4" Diameter | 2" Length | 20 pcs | Proudly Made In USA
- Fast Install: Drill 1/4" hole a min 2-1/4" depth | Ensure min 3/4" embedment | Hammer in nail to secure
- Rated for indoor or outdoor use in concrete, block, or brick masonry | Medium duty and tamper-proof low profile mushroom head
- Great for attaching awnings, drywall track, electrical boxes, conduit clips, roof flashing, plywood, and lumber
User questions & answers
| Question: | How many in a box |
| Answer: | About a 1/16 th of an inch |
CONFAST 1/4" x 2" Hammer Drive Nail in Anchor (100 per Box)
CONFAST
Product description
Applications
The anchor is made from ZAMAC. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Dry environment.
Hole Diameter/Bit Diameter
The anchor requires a 1/4" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Diameter of Anchor
The diameter of the anchor is 1/4".
Length Anchor
The length of the anchor is 2"
Minimum Embedment
The minimum anchor embedment into the concrete is 3/4". Therefore, the anchor must be installed so that a minimum of 3/4" of the anchor is embedded into the concrete.
Spacing between Anchors
Each anchor must be spaced a minimum distance of 2-1/2" from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 1-1/4" from an unsupported edge of the concrete.
- INSTALLS INTO A VARIETY OF BASE MATERIALS-Can be used in a variety of applications making job easier and faster
- ANCHOR DIAMETER EQUALS HOLE DIAMETER-Makes it easy to determine hole size
- ALL SIZES PACKAGED 100 PIECES PER BOX-Quantity makes it easier to purchase and use
- PERMANENT FASTENING-Once installed, fastener cannot be removed, very secure
CONFAST 1/4" x 3" Hammer Drive Nail in Anchor (60 per Box)
CONFAST
Product description
Applications
The anchor is made from ZAMAC. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Dry environment.
Hole Diameter/Bit Diameter
The anchor requires a 1/4" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Diameter of Anchor
The diameter of the anchor is 1/4".
Length Anchor
The length of the anchor is 3"
Minimum Embedment
The minimum anchor embedment into the concrete is 3/4". Therefore, the anchor must be installed so that a minimum of 3/4" of the anchor is embedded into the concrete.
Spacing between Anchors
Each anchor must be spaced a minimum distance of 2-1/2" from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 1-1/4" from an unsupported edge of the concrete.
- INSTALLS INTO A VARIETY OF BASE MATERIALS-Can be used in a variety of applications making job easier and faster
- ANCHOR DIAMETER EQUALS HOLE DIAMETER-Makes it easy to determine hole size
- ALL SIZES PACKAGED 100 PIECES PER BOX-Quantity makes it easier to purchase and use
- PERMANENT FASTENING-Once installed, fastener cannot be removed, very secure
CONFAST 1/4" x 3" Split Drive Flat Zinc Plated (100 per Box)
CONFAST
Product description
Applications
The anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material.
Environment
The anchor is designed for use in a Dry environment.
Head Style
The anchor is a Flat Countersunk head and is designed to prevent the head from protruding above the surface of the item being attached.
Hole Diameter/Bit Diameter
The anchor requires a 1/4" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Diameter of Anchor
The diameter of the anchor is 1/4".
Length Anchor
The length of the anchor is 3"
Minimum Embedment
The minimum anchor embedment into the concrete is 1-1/8". Therefore, the anchor must be installed so that a minimum of 1-1/8" of the anchor is embedded into the concrete.
Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-7/8". This will ensure that the minimum embedment of 1-1/8" will be met.
Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4" diameter anchor requires the hole in the fixture to be 3/8".
Spacing between Anchors
Each anchor must be spaced a minimum distance of 2-1/2" from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 1-1/4" from an unsupported edge of the concrete.
- TAMPERPROOF-Anchor cannot be removed to provide security for item being attached
- ZINC PLATED-Provides rust resistance for dry applications
- FOR CONCRETE ONLY-Fast, easy and strong fastening into solid concrete
- NO SPECIAL TOOLS NEEDED-Drill the hole drive with a hammer; fast and simple
ISPINNER 52pcs Zinc Plated Steel Long Hollow Wall Drive Anchor Screws Assortment Kit for Drywall (35mm 46mm 59mm)
ISPINNER
- ▲Size - 1/8SDx35mm, 1/8SDx46mm, 1/8SLDx59mm, Total 3 most used sizes, different sizes can meet your different needs.
- ▲Material - High quality zinc plated carbon steel, rust resistance and corrosion resistance, durable enough for you to hanging items
- ▲Design - Heavy-duty hollow drive wall anchor expansion when installing, providing strong bearing capacity and safety
- ▲Applications - Widely used in drywall, hollow block, plaster, tile, perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches
- ▲Package Include - 52 PCS 3 Sizes total in a sturdy Transparent Plastic Case, Easy to Store. Besides, the box can be used for a storage box.
User questions & answers
| Question: | How big of a difference is the performance with these vs the traingular winging anchors?\ |
| Answer: | No special installation tools are needed. You drive it in the sheetrock with a hammer then tighten the screw with a screwdriver (or power driver) to set it. If you are using it in anything other than gypsum board you will have to pre drill a hole the size of the anchor body. |
| Question: | Do I need the install tool? Or will a screwdriver work to fully anchor them |
| Answer: | Typically left in place. Cover the holes with spackling after the screws are removed. |
| Question: | If you need to remove the anchor down the road, how is it done |
| Answer: | I suppose you can |
| Question: | Can you install the bolt and screw then at a later remove the screw and use it in the same insert (bolt) again |
| Answer: | Details in description. They’re many sizes. My tv. 50” VIZIO |
Product features
ISPINNER 52pcs Zinc Plated Steel Long Hollow Wall Drive Anchor Screws Assortment Kit for Drywall (35mm 46mm 59mm)
Heavy-duty hollow drive wall anchor expansion when installing, providing strong bearing capacity and safety.
Made of high quality zinc plated carbon steel, rust resistance and corrosion resistance, durable enough for you to hanging items.
DESIGN
Heavy-duty hollow drive wall anchor expansion when installing, providing strong bearing capacity and safety.
WIDE APPLICATION
Widely used in drywall, hollow block, plaster, tile, perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches
Wej-It Nail-It DN1412 Drive Anchor, Zamac Alloy, Zinc Plated Finish, Meets GSA FFS-325 Group V Type 2 Class 2 Specifications, 1/4" Diameter, 1-1/2" Length (Pack Of 100)
Wej-It
Product description
- Drive anchor provides a secure hold in concrete, block, brick, and stone
- Anchor consists of a zamac alloy body and a cold rolled steel pin, which drives in with a hammer (sold separately) to expand and grip the mounting material
- Meets Fed. Spec. GSA FFS-325 Group V, Type 2, Class 2 specifications
- Ultimate tensile strength for a static load is 800 lb. in 3,000-psi unreinforced stone aggregate concrete
- Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
User questions & answers
| Question: | I’m looking for the depth of engagement. What does “item string length” means |
| Answer: | Quantities per bag varies by size. This particular size: 1/4" x 1-1/4" contains 25 pieces. |
| Question: | It's this removable |
| Answer: | The manufacturer suggest that a hammer is always used in the installation of this anchor . However some professionals might use a piece of steel rod as an extension to allow the hammer to reach the anchor. |
| Question: | Can they be used with treated lumber |
| Answer: | No, these are not designed for use in wood. |
| Question: | Will these anchors rust if used outdoors |
| Answer: | The anchor portion itself is 3 inches long. |
ISPINNER 30pcs 1/8 inch 35mm Zinc Plated Steel Hollow Drive Wall Anchor Screws for Drywall (1/8SD x 35mm)
XM
- ▲Size: 1/8SDx35mm
- ▲Material: High quality zinc plated carbon steel, rust resistance and corrosion resistance, durable enough for you to hanging items.
- ▲Design: Heavy-duty hollow drive wall anchor expansion when installing, providing strong bearing capacity and safety.
- ▲Applications: Widely used in drywall, hollow block, plaster, tile, perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches.
- ▲Package Include: 30pcs in a sturdy transparent plastic case, easy to store. Besides, the box can be used for a storage box.
Product features
ISPINNER 30pcs 1/8 inch Zinc Plated Steel Hollow Drive Wall Anchor Screws for Drywall
Heavy-duty hollow drive wall anchor expansion when installing, providing strong bearing capacity and safety.
Made of high quality zinc plated carbon steel, rust resistance and corrosion resistance, durable enough for you to hanging items.
DESIGN
Heavy-duty hollow drive wall anchor expansion when installing, providing strong bearing capacity and safety.
WIDE APPLICATION
Widely used in drywall, hollow block, plaster, tile, perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches
Hard-to-Find Fastener 014973308933 Split Drive Anchors, 1/4 x 3, Piece-100
Product description
We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thouroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.
- Diameter: 1/4"
- Length: 3 inches
- Material: Steel
- Finish: Zinc
- Head Style: Split Drive
125) Mushroom Head 1/4 x 1-1/4 Hammer Drive Pin Anchors Nail-in Hammer-in Rivet
Lexar Industrial
Product description
Lot of (125) pin anchors.
These zinc alloy anchors are designed for a 1/4" drill hole and are 1-1/4" in length with a zinc plated steel pin.
- Diameter: 1/4
- Length: 1-1/4
- Head Type: Mushroom
- Finish: Plain
Latest Reviews
View all
Oxo Food Storage Containers
- Updated: 31.05.2023
- Read reviews
Negative Ion Generators
- Updated: 18.02.2023
- Read reviews
Permanent Basement Dehumidifier
- Updated: 11.04.2023
- Read reviews
Protein Food For Dogs
- Updated: 16.03.2023
- Read reviews
Neck Pillow For Car Travels
- Updated: 29.04.2023
- Read reviews