12 best glue for metals

Product description

The gorilla super glue gel is an easy-to-use, thicker and more controlled formula great for multiple surfaces and vertical applications. Developed for long-lasting repairs in an instant, the clear glue Dries in 10–45 seconds. This super glue gel is specially formulated to absorb drops, impacts and shocks. Super glue, also referred to as cyanoacrylate glue, or CA glue, works on a variety of materials, including plastic, metal, fabric, stone, ceramic, paper, rubber and more. In addition to its high performance formula, we’ve added an anti-clog cap with a metal pin inside to ensure an airtight seal for maximum reusability. It’s Gorilla tough, every time. Not recommended for use on polyethylene or polypropylene plastic. Service Temperature 65 Degrees Fahrenheit to 220 Degrees Fahrenheit.

• GEL FORMULA: No run control gel formula that is great for use on vertical surfaces
• ANTI CLOG CAP: Helps keep glue from drying out. It's Gorilla tough use after use
• IMPACT TOUGH: Specially formulated for increased impact resistance and strength.
• FAST-SETTING: Dries in 10-45 seconds. No clamping required
• VERSATILE: Bonds plastic, wood, metal, ceramic, rubber, leather, paper and more. Not recommended for use on polyethylene or polypropylene plastic or similar materials

User questions & answers

Question:	Can this be used to repair a car's plastic intake manifold (nylon polymer) ? Is it compatible
Answer:	Hello this is Christopher Stafford of reflections, unfortunately I wouldn’t recommend this item for your particular application. I would recommend Loctite 404. Thanks for your message and interest.
Question:	EPO Foam safe? I have several RC models that are made from EPO and EPP Foam. Would like a quick to repair glue.... Thanks
Answer:	Hello, Gorilla Super Glue Gel is not recommended for use on foam surfaces. If we can be of further assistance, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact and reference case #315176. Thank you, The Gorilla Glue Company
Question:	Will it glue leather to metal
Answer:	Hello, Gorilla Super Glue Gel will work on leather and metal surface. For smooth surfaces, we recommend roughing the surface to provide a texture for the glue to adhere to. For further assistance with your application, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact and reference case #194392. Thank you, The Gorilla Glue Company
Question:	What's the difference between their super glue gel and their super glue
Answer:	Hello Ryan N.,Gorilla Super Glue Gel is a thicker consistency that is perfect for applications on vertical surfaces. Our Gorilla Super Glue and Gorilla Super Glue Gel will have the same holding power. For further assistance with your application, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact.Thank you,The Gorilla Glue Company

Product description

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 3960 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550ºF when fully cured.

• J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more.
• CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey.
• VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid.
• SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass.
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
• Will set in 4-6 hours, and cure in 16-24 hours
• Waterproof, petroleum, chemical, and acid resistant when fully cured

User questions & answers

Question:	Could this be used to fix a small (1 x 1/4 inch) crack in a dryer drum? Is there danger it will come off on the clothes
Answer:	When I have had questions about JB Weld products I have called JB Weld & they have answered with good information. Your problem is special because of the temperature that the drum attains. Ask JB Weld.
Question:	Is this product electrically conductive
Answer:	It is NOT electrically conductive. JB Weld is classified as an insulator my the manufacturer (see JB Weld FAQs). In fact it's rated to be microwave safe. Metallic conductors should never be used in a microwave oven, but JB Weld is OK for microwave use.
Question:	I have a number of small leaks in an older aluminum boat-- would JB work for a repair on this as a weld/filler for small punctures? thanks
Answer:	This is a general purpose epoxy that worked great for me on cast iron. It does say you can use it for marine purposes, however you might also consider their product made specifically for water:http://www.amazon.com/J-B-Weld-8277-Water/dp/B000BRQ0TW/ref=sr_1_5?ie=UTF8&qid=1392730373&sr=8-5&keywords=jb+weldor look into the Permatex product made specifically for metalshttp://www.amazon.com/Permatex-84109-PermaPoxy-Minute-Multi-Metal/dp/B000ALDXV2/ref=sr_1_1?ie=UTF8&qid=1392730252&sr=8-1&keywords=metal+epoxy
Question:	block crack between cyls 5 & 7 against the head, at the narrowest point between cyls. both cyls are sleeved. will jb hold the temp without breaking do
Answer:	thanks gpower. was looking online at the temp ratings of different epoxy products, actually found one @2100F, but with low tensile strength. I would like to stay away from welding as the crack is five eights long and sleeved at each end. just now pressure testing and the waterjacket has held 30 lbs for 12 hrs. I may also entertain some of the hi-tech block sealers, if it continues to hold pressure. thanks again for your input, and wish me luck putting life back in this old hemi. Dean

Product features

Original Twin Tube Epoxy

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond with tensile strength of 5020 PSI after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color and fully cures in 15-24 hours.

Additional Attributes

• Can withstand 550°F/287°C
• After curing, J-B Weld Original can be drilled, tapped, filed, sanded, molded and shaped.
• J-B Weld Original is waterproof, petroleum, chemical and acid resistant once fully cured.
• Surface Applications: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass.
• Use On: Household, Automotive, Marine, Plumbing, Crafts, Outdoor Equipment, Agricultural Equipment, Motorcycle, Toys, Boats, Personal Watercraft, In/Outboard Engines and Deck & Hull Accessories.

Product description

Aleene's jewelry and metal glue. This .70 ounce tube of glue is an instant adhesive perfect for metals, stones, glass and beads! make your creative ideas stick with this specialized glue. 1 piece per package.

• Aleene's jewelry and metal glue. This .70 ounce tube of glue is an instant adhesive perfect for metals, stones, glass and beads. Make your creative ideas stick with this specialized glue. 1 piece per package.
• Bonds quickly and gel formula won't run when applied
• Dries clear, strong and permanent
• Available in .7oz metal squeeze tube

User questions & answers

Question:	Hypoallergenic for earring posts
Answer:	I think it is cause I have sensitive skin and have had no issues so far
Question:	can you use this glue on plasric thread for bead knots
Answer:	I would think you could.
Question:	would this glue work for a string of real pearls? thank you
Answer:	To harsh. May affect their shine/luster.
Question:	Does this glue have the vapor which affects stone sparkle
Answer:	Depends on the material the 'stones' are composed of.

Product features

Aleene's Jewelry & Metal Instant Adhesive

Jewelry is important … and so is the glue that holds it together!

Jewelry & Metal Glue is your go-to glue when you need an easy solution for creating or repairing jewelry easily, quickly and permanently . It even works on porous and semi-porous stones, gems, metals and other materials so your jewelry stands out like it’s meant to.

This glue works best on:

• Beads
• Metals
• Stones
• Gems
• Mirrors
• Ceramics
• Plastics

Details

• No-drip, no-run formula provides ultra control
• Strong, permanent bond
• Dries clear and fast
• Great for repairs
• Impact resistant
• Waterproof

Product description

I Love To Create-Aleene's Jewelry & Metal Glue. Perfect for jewelry ceramic pieces leather metal rubber gems mirrors wire and more! Strong and permanent. This package contains three .1oz tube of jewelry and metal glue. Conforms to ASTM D 4236. Made in USA.

• I Love To Create-Aleene's Jewelry & Metal Glue
• Perfect for jewelry ceramic pieces leather metal rubber gems mirrors wire and more! Strong and permanent
• Made in United States
• Bonds quickly and gel formula won't run when applied
• Dries clear, strong and permanent
• 0.3 fl oz contains 3 tubes

User questions & answers

Question:	is this epoxy
Answer:	No, this is not epoxy330. Amazon does sell epoxy so check it out.
Question:	how do you remove the thin collar
Answer:	The thin collar is only on the larger tubes. If you have any further inquiries, please contact Aleene's at [email protected] or call 1-800-438-6226.
Question:	How good is this glue for glass
Answer:	Not good, I tried and instead it glued my fingers to the glass and glued my fingers together
Question:	How to remove excess glue from edges
Answer:	If the glue has not dried, you can wipe the excess with a damp cloth or Q-Tip. If the glue has dried, you can use 85% or higher rubbing alcohol or 100% acetone. If you have any further inquiries, please contact iLoveToCreate at [email protected] or call 1-800-438-6226.

Product description

With a rubber-infused formula, Ultra Gel Control Super Glue resists jarring and impact. The specially formulated, rubber-toughened, instant adhesive resists impact, shock, vibration and temperature extremes. It is resistant to moisture and freezing temperatures. Ideal for bonds subject to daily use and harsh conditions, even outdoors. Use on metal, rubber, ceramics, wood, leather, paper and plastics. Durable super glue also gives you more time to align pieces before the glue takes hold. It dries clear and sets without clamping. Gel glue comes in a patented, side-squeeze design for maximum control and airtight storage.

From the Manufacturer

For over 50 years, Loctite has provided customers with advanced adhesive and sealing solutions. Loctite Super Glue Ultra Gel Control is a specially formulated rubber toughened instant adhesive that resists impact, shock, vibration and temperature extremes. It is ideal for bonds subject to daily use and harsh conditions. The Rubber Toughened Formula is also outdoor-safe and gives more time to align pieces before the glue takes hold. Loctite Super Glue Ultra Gel Control comes in a patented side-squeeze design for maximum control and air-tight storage. Simply squeeze the side grips to dispense the desired amount. The gel formula stays where applied and eliminates running and dripping. It dries clear and sets without clamping. Loctite Super Glue Ultra Gel Control is resistant to moisture, most chemicals and freezing temperatures. It dries clear and sets without clamping. Loctite Super Glue Ultra Gel Control is resistant to moisture and freezing temperatures. Our uncompromising level of quality and innovation is achieved through a strong commitment to research and development. This commitment to innovation, quality and reliability has truly earned Loctite the reputation of delivering "Trusted Performance. Proven Results".

• Rubber-toughened, instant adhesive resists impact, shock, vibration and temperature extremes
• Ideal for metal, rubber, ceramics, wood, leather, paper and plastics
• Comes in a patented, side-squeeze design for maximum control and airtight storage
• Glue dries Clear and sets without clamping
• 0.14 fl oz.; 1 Each

User questions & answers

Question:	Does this glue dry clear, and if so, does it STAY clear? I need a glue that dries clear and won't yellow after a few months. Thanks
Answer:	It dries clear but it's unknown how long it will remain clear. If you want guaranteed longterm crystal clarity, get glass glue. https://www.amazon.com/Loctite-Glass-Glue-2-Gram-233841/dp/B000PSBBM8
Question:	How long does it take to set? is it as fast as Krazy glue
Answer:	It is slower and less runny than Krazy glue. Fully sets in 60 seconds, you get a good grip much sooner but still have some wiggle room. I find it better for applications that need small adjustments.
Question:	how well does this product work on plastics
Answer:	My experience with it on plastic is great. I generally use it for rocks and intarsia work, but the key to getting it to properly hold is to completely clean the surface so no oils from you fingers or any other surface contamination is remaining. I use alcohol and qtips to clean the two surfaces and let it dry, then apply a small amount of glue and hold it in place. I love this product and think you will also.
Question:	Does this glue dry up after opening and using -even if I replace the cap quickly
Answer:	Agreed with NuMystic 100,000%. This glue is great, and i never have a problem with it drying up as long as the cap goes back on quickly. there is a small amount in the container, but a little goes a long way. 2 kids, lots of broken toys etc. this stuff does the trick. Also, i keep a tube at mom mom's house so i can fix any picture frames or ceramics the kids break. 5 stars for this stuff. PS, keep a bottle of nail polish remover and cotton balls handy in case you get some on your fingers. At first you and the kids will laugh when your fingers are stuck together but then when it starts to cure it shrinks a bit and pulls the skin. pretty painful..

Product features

Loctite Ultra Gel Control Super Glue

Specially formulated to fix any breaks around the home or office, Loctite ULTRAGEL Control has a rubber-toughened formulation that provides a durable bond that resists impact, shock, and vibration and is ideal for bonds subject to daily use or harsh conditions.

Rubber Toughened Formula

Loctite Super Glue Ultra Gel is rubber toughened for a flexible, impact and water resistant bond. Gel super glues have a thick, no-drip consistency ideal for vertical application, porous surfaces and filling minor gaps between parts.

Multipurpose Use

Use on a variety of surfaces including metal, leather, cork, ceramic, wood, chipboard, fabric, paper, cardboard, rubber, and most hard plastics.

Patented Control Applicator

Easy-squeeze sides for precise dispensing and pin-point accuracy. Self-piercing, screw-on cap keeps the nozzle clog-free and the glue fresh. Expect repeated use when tightly sealed and stored upright in a dry location.

Product description

QUIK-CURE 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE shouldn’t be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. QUIK-CURE is our only epoxy on which you can apply polyester resins. It can be mixed with micro balloons to form a quick setting putty. Items bonded with QUIK-CURE can be handled after 15 minutes. Full strength is reached in 1 hour. Directions in 5 different languages.

• Made in the USA
• Five minute working time
• Handle parts in ten minutes
• Proud Sponsors of Wounded Warrior Project

User questions & answers

Question:	will it bond metal to plastic
Answer:	Yes. If plastic is not polyethelyne or contains a combination of it. Roughen metal surfaces if possible. Might drill holes in materials and allow epoxy to flow through it and it becomes, in effect, a plastic rivet.
Question:	What is the minimum service temperature of this epoxy (once it has already been set
Answer:	I would not subject it freezing temps for extended periods of time. I have a custom knife I made using this epoxy for the handles and I carry it every day all year. I have had zero issues in any weather conditions
Question:	Does it dry clear
Answer:	If you mean color then yes. If you mean can you see through it when it dries then it depends on how much air you introduce into it when you mix the two parts around. I suppose if you mix if very slowly, then no bubbles would be introduced and then it would be clear.
Question:	Does this epoxy dry clear
Answer:	Yes it will dry clear. I think if you stir rapidly you can create more bubbles which may cause the epoxy to look less clear. I like it much better than the joined tubes.

Product features

5 Minute Two Part Epoxy Adhesive

5 minute epoxy cures to a slightly flexible consistency, allowing it to form a lasting bond in areas subjected to high vibration. Items bonded with Quik-Cure can be handled after 15 minutes and full strength is reached after just one hour. Package contains two plastic bottles.

Product description

Gorilla Heavy Duty Construction Adhesive is a tough, versatile, all-weather adhesive. It’s 100% adhesive formula provides a long-lasting, heavy duty bond. We call it All Surface, All Purpose. The durable, 100% waterproof formula holds up indoors and out and bonds virtually anything including subfloor, mirrors, trim, drywall, landscaping, bath surrounds, foam board, marble and more! Directions: All surfaces should be clean and free of dirt, grease and oil. Heavy items may require temporary support. Use in conjunction with mechanical fasteners when hanging large mirrors. 1. Unscrew nozzle, cut tip of cartridge, replace nozzle and cut to desired bead size. Insert into cartridge gun. 2. Apply adhesive to one surface in a zig-zag pattern or inside perimeter of the object. Be careful of squeeze-out. When working on rough, uneven surfaces, use enough adhesive to fill gaps. 3. Within 10 minutes, press surfaces together and hold for 20-60 seconds. For smaller product check out our 2.8oz Construction Adhesive Tube. Click on the Gorilla link at the top of this page to see other quality products from the Gorilla glue company.

• Imported
• Strong, versatile and durable construction adhesive that bonds virtually everything
• Best for building and home improvement projects, both indoors and out
• Fast grab; Holds in 30 seconds
• All weather; Indoor and outdoor use
• VOC compliant; Low odor; 100% adhesive; No solvents or water

User questions & answers

Question:	When this adhesive dries up, does it get hard or is it felxible
Answer:	Hello DJ O-ROD,Gorilla Heavy Duty Construction Adhesive will remain somewhat flexible to allow for expansion and contraction of the substrates. For further assistance with your application, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact.Thank you,The Gorilla Glue Company
Question:	Is this urethane based
Answer:	Hello Stephen,Gorilla Heavy Duty Construction Adhesive is not urethane based. For further assistance, please contact our Consumer Affairs department at 800-966-3458 or through our website at http://www.gorillatough.com/contact. Thank you,The Gorilla Glue Company
Question:	Will this work if i would like to mount a mirror to the wall? And do i need to use it with that dispenser
Answer:	Yes will work for mounting a mirror just need to support till the adhesive dries. And yes you will need a gun to get the adhesive out of the tube
Question:	How long does this take to bond? I can't get it to stick
Answer:	I used it to put up sign letters in humid weather. It took about 3-5 minutes to set and within 30 minutes each letter was secure. Bonus was that an hour after I did the job we had one of our FL surprise torrential downpours. It rained for several hours. I was just sure that I would find all the letters of the sign on the ground the next morning, but they were still in a straight line secured to the wall. This is not the product I use for that kind of job as a rule, but I was in a bind so gave it a shot. No complaints.

Product description

The same serious strength you expect from Original Gorilla Glue, in a dries white, faster formula. White Gorilla Glue is a 100% waterproof glue, safe for indoor and outdoor use and strong enough to stand up to the elements. The white glue easily bonds foam, wood, metal, ceramic, stone and much more! White Gorilla Glue is a moisture activated adhesive. It is important to replace the cap tightly, and store in a cool, dry place. You should expect a year shelf life. Directions: If you’re using White Gorilla Glue for the first time, we always recommend trying a test piece first. All surfaces must be clean, dust free and tight fitting. For shiny surfaces, such as metals, glass and some plastics, roughen up the material to give the glue something to bite into. Lightly dampen one surface with water. We recommend using a damp cloth or spraying with water. Do not saturate the surface. For dense hardwoods, lightly dampen both surfaces prior to gluing. Carefully apply a paper thin layer of White Gorilla Glue onto the other, dry surface. Do not over apply. We recommend wearing gloves or spreading the glue with a disposable brush. Clamp the two surfaces together tightly. Make sure the clamping pressure is distributed evenly across the surface. Or, if you don’t have a clamp, use heavy objects or Gorilla Tape to achieve the appropriate clamping pressure. For lighter objects, try using rubber bands to hold the pieces together tightly. Clamp objects for 30–60 minutes. For best results, allow 24 hours to cure. If you need to remove any uncured “squeeze out” or wet glue, we recommend wiping with a dry cloth or using a standard paint thinner. Once the glue is dry, it is best removed mechanically: Try sanding, chiseling, scraping or picking. After each use, wipe lid and nozzle clean with a dry cloth. Click on the Gorilla link at the top of this page to see other quality products from the Gorilla Glue Company.

• Incredibly strong and versatile; The leading multi-purpose waterproof glue that dries white
• Best for tough repairs on dissimilar surfaces, both indoors and out
• 100% Waterproof; Doesn't break down when exposed to outdoor elements
• Versatile; Easily bonds wood, stone, metal, ceramic, foam, glass, concrete and much more!
• Incredibly Strong: Expands 3 times into the materials to form an incredibly strong bond

User questions & answers

Question:	Does this work on memory foam
Answer:	This item will not work with memory foam.
Question:	Will this glue be good enough for my shoe soles that's coming off in the front
Answer:	Yes, it will be good enough. One of the ladies in our office had a shoe sole issue with a pair of heels she was wearing and the Gorilla glue was a permanent fix.
Question:	does this product foam when drying
Answer:	Yes. It does foam after a few minutes, so you need to wipe off the excess before leaving the item unattended. It's hard to get off once it hardens. You don't need to apply too much of the glue. It works great. You have to make sure you squeeze the bottle to remove most of the air. I also keep it doubled bag in plastic, so air doesn't harden the glue in the bottle. The new cover/top is a great improvement.
Question:	What is the difference in this "white" gorilla glue versus the original which dries white
Answer:	This glue also dries white

Product description

Permatex Steel Weld Epoxy is a versatile, easy-to-use, multi-metal epoxy two-part adhesive and filler system that eliminates the need for welding or brazing. Sets in four minutes, no clamping needed. Dark grey appearance. Fills gaps and will not shrink. When cured, can be drilled, sanded, threaded or filed. Resistant to water and solvents. Temperature range -60°F to 300°F (-51°C to 149°C). Permanent strength up to 4500 PSI. Ideal for use on complex, multi-piece assemblies and for bonding rigid materials, sealing welded seams, filling metal cracks, and mounting metal components.

• Versatile, easy-to-use, multi-metal dark grey epoxy adhesive that eliminates the need for welding or brazing
• Water and solvent resistant epoxy sets in 4 minutes with no clamping needed; permanent strength up to 4500 PSI
• Fills gaps and will not shrink; when cured can be drilled, sanded, threaded or filed
• Temperature Range: -60°F to 300°F (-51°C to 149°C)
• Suggested Applications: Ideal for complex, multi-piece assemblies; bonds rigid materials including aluminum, brass, chrome, copper, iron, stainless steel, and steel; use to seal welded seams, fill metal cracks, and mount metal components

User questions & answers

Question:	Will it work on lawn tractor radiator hole
Answer:	It's worth a try, the stuff is great. I question that there is a water radiator in a lawn tractor, usually they are air cooled.
Question:	Will this work to fix my cars side view mirror because jb weld was an epic fail
Answer:	This is a lot stronger then jb weld. but use a mesh when using it. Makes it better. Ultimately I would say to go on am-autoparts.com You can get the whole thing for under 100 and free shipping.
Question:	What is the color, black, gray, clear, tan
Answer:	dark Grey
Question:	Does this epoxy do well in heat? Specifically exhaust/muffler heat
Answer:	I used to heat to remove the epoxy when it didn't hold as well as I had hoped. I don't think this would work with a muffler.

Product features

Permatex Steel Weld Epoxy

Versatile, easy-to-use, multi-metal epoxy adhesive is two-part adhesive and filler system that eliminates the need for welding or brazing. Sets in four minutes, no clamping needed. Dark grey appearance. Fills gaps and will not shrink. When cured, can be drilled, sanded, threaded or filed. Resistant to water and solvents. Permanent strength up to 4500 PSI. Ideal for complex, multi-piece assemblies and for bonding rigid materials. Use to seal welded seams, fill metal cracks, and mount metal components.

Product description

The Only Glue You'll Ever Need! Rhino Glue Gel is a clear commercial grade instant adhesive that will bond everything. Rhino Glue will instantly bond the same or dissimilar surfaces like hard to bond plastics, vinyls, canvas, woods, rubber, ceramics, metals, glass, fabrics and more. No more failed bonds or dry outs with our triple distilled adhesive that works on materials where others fail. Rhino toughened formula for impacts, shock, moisture, heat and vibrations. Rhino Gel is a thicker version of Rhino Glue. Unlike other gel glues no more gummed up bottles. Faster Stronger Tougher. For more info go to our company site at Rhino Glue Dot Com. Rhino Glue is not available in stores.

• Rhino Glue Gel, Heavy Duty 40 Gram Clear
• Bonds in seconds plastics, vinyl, wood, rubber, metals, canvas, acrylics, ceramic, glass and more.
• Clear Stress Tough formula for impacts, shock, moisture, heat and vibrations
• The Faster Stronger Tougher Glue!

User questions & answers

Question:	Would it bond glass to plastic
Answer:	Yes to both.
Question:	How do you open the rhino glue pro kit. i keep twisting it but still it's not open
Answer:	bend the top and twist and pull
Question:	Would this work on thin rubber? Other super glue I used in past actually basically melts thin material
Answer:	I bought it because I was told that I could use it on my Halloween tombstones which are made of styrofoam. Other superglue melts the foam and this does not so I would think that it will probably work on your rubber as well. It is the strongest glue I have come across. when it sets, your item will stay fixed. In fact, I have used it on rubber. the tip of one of my sneakers came off and nothing would hold it back on. Well, Rhino Glue did and that was rubber to leather on a curved area.
Question:	How does this compare to gorilla glue for holding strength
Answer:	I haven't tried gorilla glue so I can't really compare. All I know is I researched the rhino glue and decided to purchase it to fix my convertible top. It worked like a charm. I'm very satisfied.

Product description

Instant Glue / Super Glue is recommended for bonding Metals, Rubber and plastics, ceramic and most rigid materials. High viscosity allows to fill large gaps. Net weight of product is 20 grams, the volume, however, is less than 1oZ (30 ml), Therefore the bottles look half full.

• Net weight of product is 20 grams, the volume, however, is less than 1oZ (30 ml), Therefore the bottles look half full.
• Making toys, crafts, kitchen and bathroom cabinets, wooden and plastic frames, archery insert and fletching glue

Product description

J-B KwikWeld is a fast setting version of The Original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. J-B KwikWeld has a 1:1 mixing ratio, sets in 6 minutes and is fully cured in 4-6 hours. J-B KwikWeld cures to a dark grey color, is rated at a tensile strength of 2424 PSI and will withstand temperatures up to 300ºF.

• J-B Weld KwikWeld: A fast setting version of The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to multiple surfaces. Perfect for DIY household, automotive, marine, craft repair and much more
• Cure and Set Time: After mixing the tubes at a 1: 1 ratio, it takes 6 minutes to set and 4-6 hours to cure. Once cured, KwikWeld can be tapped, filled, sanded, molded and drilled. KwikWeld’s set and cure color is dark grey
• Versatile and Dependable: J-B Weld KwikWeld is steel reinforced, has a tensile strength of 3127 PSI and can withstand temperatures up to 230 degrees Fahrenheit (110 degrees Celsius). When fully cured, KwikWeld is waterproof and resistant to petroleum, chemical and acid
• Surface Applications: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass
• Do it Yourself: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond

User questions & answers

Question:	Weird question i know but would i be able to glue my led light strip to the carpet part of my vehicle with this
Answer:	Yes but it doesn't set quickly like super glue. You'll need to hold the led in place for at least 6 minutes and then let the glue dry completely. I used the glue to reattach a rearview mirror support slug to a windshield. I held the slug in place for 6 minutes and then let it dry overnight before I attached the rearview mirror to it. The instructions on the package will explain this. Also, be aware that you will NEVER be able to remove the led without ripping out the carpet.
Question:	Would this work to fill a small hole in a slab of granite
Answer:	Yes but it won't be pretty
Question:	We put in peel and stick flooring, and there are a few gaps between boards. Would this work to fill in the gaps
Answer:	Can it? Sure. Is it practical to use it in this manner? Probably not. It is messy, but if you tape the areas where you do not want the epoxy and pull the tape up before it sets, you'll be fine. You can also clean it up with acetone as long as you get to it before it sets. I also wouldn't recommend 5/6 minute epoxy, either. If you are filling a long gap, you'll need the extra time for clean up.
Question:	can it hold metal to plastic
Answer:	yes it can

Product features

Original Twin Tube Epoxy

KwikWeld is a fast setting version of The Original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. KwikWeld has a 1:1 mixing ratio, sets in 6 minutes and is fully cured in 4-6 hours.

Additional Attributes

• Can withstand 230°F/110°C
• When fully cured KwikWeld is waterproof, petroleum, chemical, and acid resistant!
• Surface Applications: Metal, Plastic, PVC, Concrete, Ceramic & Tile and Fiberglass
• Use on: Household, Automotive, Marine, Plumbing, Crafts, Outdoor Equipment, Agricultural Equipment, Motorcycle, Toys, Boats, Personal Watercraft, In/Outboard Engines and Deck & Hull Accessories.