12 best high temperature tapes

Product description

3M High Temperature Flue Tape stops hot air leaks where they start – the seams of your heating ducts. The flue tape is heat resistant up to 600° F.

From the Manufacturer

3M High-Temperature Flue Tape is easily installed around seams in hot air ducts. It stops hot air leaks and may be used on surfaces up to 600 degrees F (315 C). Measures 1-1/2 inch by 15 foot

• Stops leaks from hot air ducts
• Heat resistant up to 600° F
• Helps reduce heating costs
• Measures 1.5 in x 5 yd
• Made in the USA
• Heat resistant to 600 degrees Fahrenheit
• 1.5 in. x 15 ft. roll

User questions & answers

Question:	Would this work for a water heater vent duct
Answer:	Yes, this is the correct part for your unit.
Question:	Can this be used for taping polystyrene foam board (styrofoam like) against the metal garage door
Answer:	This would be the drop in replacement: https://www.amazon.com/gp/offer-listing/B083WPND2X/?seller=A3ENSQM9L05QCM&ref=myi_listid_offer
Question:	How hard is this tape to remove
Answer:	Yes. I just installed it in one last week. It was perfect.
Question:	Can the tape be applied directly onto a wood stove, to seal the flue to it
Answer:	You will have to look up your model no.

User questions & answers

Question:	Is this polyster or polymide
Answer:	The listing describes the material as Polyimide so I assume that is correct.
Question:	Will this stick to aluminum to use on an oven
Answer:	I use this heat tape to keep my transfers in place when I use a heat press..what are you planning on using this for in an oven?
Question:	The handles on my aluminum backpacking cup get very hot when I boil water. Will applying this tape to the handles keep them cool
Answer:	No it will not.
Question:	Can anyone tell me the size of the core? I have a dispenser and want to make certain it'll fit. Thanks
Answer:	The roll of the core is about 75mm(2.95inch), thanks

Product features

MS WGO High Temperature Heat Resistant Tape

• Substrate material: Polyimide polymers film
• Glue Type: Silicone
• Substrate material thickness: 0.025mm
• Thickness with adhesive: 0.05mm
• Adhesive strength: 4.5N/25MM
• Tensile Strength: 115N/25mm
• Elongation: 50 %
• Temperature Range:-73°C – 260°C (-99°F - 500°F)
• Breakdown voltage:Min 4KV

High Temperature Heat Resistant Tape

• Leaves no residues after you peel them off
• High temperature application (over 450 F)
• They always holds tight throughout the tape’s rated temperature range

Leaves no residues

• No brittle after heating
• Heat resistant tape is a polyester film tape with a high temperature resistant adhesive.
• Used in various electrical/electronic product manufacturing processes due to its' excellent heat resistance and electrical insulation.
• Short period Heat Resistance:260℃
• Long period Heat Resistance:220℃

liquid crystal

Microelectronics

Space flight

Electrical equipment

• Heat resistant tape is a polyester film tape with a high temperature resistant adhesive.
• Maximum heat resistance: 482 ℉ (250℃)，comes off clean，easy peal and no residue.
• It's a heat tape for heat press,it's really indispensable when sublimating and the tape can do the job very well.
• The width of the tape is 10mm (2/5inch),it is 33 meters (108 feet) long.
• 2 rolls of tape in 1 package.

User questions & answers

Question:	does it work to protect from burning yourself on hot wires
Answer:	Not 100 percent certain but I don't think so that's not what's it's intended for. I wouldn't try it I use it to hold sublimation paper on while I heat press
Question:	Will a tape dispenser for 3 inch diameter work
Answer:	Not the regular ones
Question:	Will a tape dispenser for 3 inch diameter work
Answer:	Yes, can work
Question:	Have you had issues with it leaving marks or residue when using heat transfer vinyl
Answer:	Hmm i havent used it yet but as soon as ido ill post a video review

Product features

Product Features

• Heat resistant tape is a polyester film tape with a high temperature resistant adhesive.
• Maximum heat resistance: 482 ℉ (250℃)，comes off clean，easy peal and no residue.
• The width of the tape is 10mm (2/5inch),it is 33 meters (108 feet) long.
• 2 rolls of tape in 1 package.

Why do we choose this tape?

• It's really indispensable when sublimating and the tape can do the job very well.
• It is a must have if you make shirts, hats, or anything with htv or sublimation.
• This is a very good tape width for use. Not too wide, and not too narrow.
• The length of the tape is really long, and the tape rolls looks very “strong”.
• EQUTE is willing to provide you with high quality products and after-sales service.

Tape is widely used in various industries

• Suitable for wave soldering shield of electronic circuit board, protection of gold finger and electrical insulation, motor insulation, and positive and negative pole of lithium battery.
• Ideal for protecting sensitive printed circuit board components such as gold leads and gold fingers during the process of wave soldering.
• Also extensive use as electrical insulation for transformer, motor, coil, capacitor and frequency conversion power supply in electronic industry.

• Lightweight Insulating Tape — Uses woven glass fiber heat resistant matting and one mil aluminized materials making it an ultra-weightless cool tape
• Reflective Solution — A thermal insulating roll tape convenient for application on cables, hoses, wires, fuel lines, and other surfaces. It can also be used to wrap wirings, seal air boxes, cover seams, and secure panels.
• Withstand Radiant Heat — It can sustain and screen off direct heat of 400 degrees Fahrenheit and radiant heat of up to 2000 degrees Fahrenheit
• Efficient Application — The strong adhesive back composite makes application quick and easy with a guaranteed long-lasting seal
• Package Inclusion — 1 x A-Team Performance Lightweight Aluminized Heat Shield Barrier Reflective Cool Insulating Tape Strong Self-Adhesive Seal 1.5" x 15' Roll

User questions & answers

Question:	Can this tape handle being under a small direct flame for a few seconds at a time? Continually
Answer:	If the flame touches it I do not know but I had it about an inch from my exhaust pipe and it worked.
Question:	I am looking for a heat resistant wire rat that will help prevent rats from chewing through the wires on my 2008 Toyota Tundra. Will this help
Answer:	Rats love wiring, this may help but extermination is best. Rats will chew thru anything.
Question:	what is the r value
Answer:	If I had the package I might be able to tell you (at least whether or not that info was listed). I have a header on my transverse mounted four banger (header faces forward) so I use this stuff to wrap wires and hoses, etc. Getting it to stick well can be tricky. I use stainless zip ties as needed. It does provide the necessary thermal protection. On a funny car I might look for a different product.
Question:	does it insulate the taped surface against heat.... in other words if I wrap a cord that is near a high heat grill, will the cord be
Answer:	Yes, that should work. The tape has a thin layer of what looks like Fiberglas woven into it so it acts as a thermal break to either side.

Product features

Key Features:

• Made from woven glass fiber heat resistant matting
• One mil aluminized materials making it ultra-weightless while providing a long-lasting seal

Application:

This insulating cool tape is convenient for application on cables, hoses, wires, fuel lines, and other surfaces. It can also be used to wrap wirings, seal air boxes, cover seams, and secure panels.

Lightweight Insulating Tape

Reflective Solution

Withstand Radiant Heat

Product description

Our Strength:



our tapes set with value pack in 5 rolls of different sizes. Made of durable polyimide film with strong silicone adhesive. Perfect for using in electronic products, soldering and circuit boards



wide application, etching, fiber optics cable, insulating circuit boards, manufacturing semiconductor, high temp powder coating, etc.



Product Features:



· Material: polyimide film



· Glue Material: silicone



· Color: Transparent brown



· Temperature range: up to 280℃(536℉)



· Size: 1/8 inch*36 yards, 7/32 inch*36 yards, 1/4 inch*36 yards, 15/32 inch*36 yards , 25/32 inch*36 yards

• PACKAGE INCLUDED: Selizo high temp tape comes with 5 packs heat resistant tape in 5 different size that is fit for your masking, soldering, electronic repair and other DIY project
• VALUE PACKS: 5 rolls in variety width, 1/8”, 7/32”, 1/4”,15/32” and 25/32”. More flexible and convenient when using in different projects
• EASY TO USE: Superior performance of the heat resistant. Strong silicone adhesive is easy to stick and no residue after peeling off
• FIT FOR YOUR NEEDS: Wide temperature up to 280℃(536℉). Works well in protecting electronic products, electric motor, solder, painting, packing fixing, printing PCB board

User questions & answers

Question:	What tape dispenser will work with this
Answer:	I ordered this one it holds 2 rolls at a time Tach-It MR25 2" Wide Desk Top Multi-Roll Tape Dispenser
Question:	Can this be used to keep a broken clothes dryer vent cover in place inside the dryer
Answer:	This tape sticks to nothing.
Question:	what size core on these rolls? The opening for the roller dispener
Answer:	Not sure, I guess same size as packing or masking tape roll
Question:	how many total feet
Answer:	Description says each roll is 36 yards. I'd say that's probably accurate as I've been using mine for a long while and am not near running out.

• Industrial-grade Aluminum Reflective Foil Tape equipped with high-heat capacity adhesive. Withstands extreme humidity and temperature from -25°C to 190°C (-13F to 374F).
• Residue-free and quick-release adhesive liner enables the AVERAGE AMERICAN with LITTLE TO NO EXPERIENCE in repair to produce PROFESSIONAL-GRADE sealing, both in looks and functionality.
• Increases temperature efficiency, making this dryer foil tape ideal for insulation, AC-units, ducts and vents. Heavy-duty against flame, moisture, weather, corrosion and rusting.
• This adhesive aluminum tape provides excellent bond on metals, plastics, copper, ceramic and concrete. Conformable and pressure sensitive adhesive enables it to fit on corrugated joints and irregular corners.
• This Metallic Furnace Duct Tape for HVAC and duct work is ideal for sealing hot and chilly air ducts, repairing seams and insulating duct pipes. Excellent vapor and temperature barrier.

Product features

ABOUT THE XFASTEN ALUMINUM FOIL TAPE

The XFasten Aluminum Foil Tape combines the durable industrial repair properties of aluminum and the ease of use of duct tapes. It has a butyl rubber acrylic adhesive that forms an airtight and water-resistant bond for both indoor and outdoor sealing, restoration, and HVAC applications. It also conforms well to irregular surfaces due to its flexible material build and it can adhere well to various smooth, textured, or rough surfaces thanks to its strong adhesive backing.

Why Choose The XFasten Aluminum Foil Tape?

The XFasten Aluminum Foil Tape is equipped with high-heat capacity epoxy resin and quick-release silicone adhesive liner. It can withstand extreme humidity and temperature. This tape is ideal for the following uses:

• Sealing hot and chilly air ducts
• Repairing metal seams
• Insulating aluminum duct pipes

Excellent Flame Retardant & Vapor Barrier

Every time you use the XFasten Aluminum Foil Tape, you won't have to worry about where to store it as it can be stored on any environment without degrading - making this aluminum duct tape ideal for window AC and heaters, vents, and ducting.

Concrete

Metal

Ceramic

Copper

High Coefficient Of Heat Transfer

The XFasten Aluminum Foil Tape features a high coefficient of heat transfer. As such, it allows the tape to be an excellent thermal insulator.

Compatible To Various Surfaces

The XFasten Aluminum Foil Tape provides excellent adhesive bond on metals, plastics, copper, ceramic, and concrete.

Conformable

This tape is easy to install as it's conformable. Its pressure-sensitive adhesive enables it to fit on corrugated joints and irregular corners.

Durable

The heavy-duty performance of the XFasten Aluminum Foil Tape is ideal to combat flame, moisture, weather, corrosion, and rusting. This tape is built to last and meant to take a beating!

• 【Extra Strong Backing】- Use a premium conformable polyester film, that offers 2X the strength of regular film. Eliminating flaking and breaking during removal process.
• 【High Temperature, Clean Removal, No Residue】- High temperature silicone adhesive system. Removes cleanly at bake temperatures up to 200°C.
• 【25% More Free Length】- Each roll consist of 216 ft (55 meters) in total. 25% more length comparing to other brands.
• 【No Shrinking, Curling or Lifted Edges】- No curling, shrinking, and lifted edges for a sharp paint line every time.
• 【Trusted Every Where】- Our tape do not contain any harmful chemicals, and complies with RoHs & Reach requirements. It is rigorously tested and meets American Society for Testing and Materials D-3652 standard, for high performance every time.

User questions & answers

Question:	Is this product made in USA
Answer:	Im not sure
Question:	Is this transparent? I am wanting to re-wrap my weathered Xmas tree yard decoration with it
Answer:	Slightly but I threw away the tspe as it didn't stick to anything.
Question:	Can this be used to tape a loose part on the inside of a residential dryer
Answer:	It could be used, but I don't know how long it would last.
Question:	How water resistant are these
Answer:	I am sorry that the polyester tape is not waterproof, but we will sell some new taps in two months later with the water resistant

Product features

APT, 2 Mil Polyester Tape with Silicone Adhesive, PET Tape, High Temperature Tape

Polyester tape exhibits excellent conformability and high dielectric strength per mil of thickness. Designed to perform in difficult masking operations such as the masking of surfaces during application of durable powder coating.

Product Features

Powder Coating Masking

High temperature polyester masking tape are ideal for powder coating masking application. It is coated with high temperature silicone adhesive. Aggressive adhesive with clean removal capability.

Tape & Film Splicing

Splicing tapes are used to join the end of a roll of material to the beginning of a new roll. Eliminating additional set ups and avoiding valuable down time. APT polyester splicing tape includes tapes designed to work in a variety of splicing applications, including paper, film and other products. Ranging from moderate to aggressive adhesives.

• ☆ Temperature & Oil Resistance: Made of Polyester cloth base with strong acrylic pressure sensitive adhesive materials, this automotive high temperature wiring harness tape has strong ability of corrosion resistance, oil resistance, high and low temperature resistance, wear resistance
• ☆ High Viscosity & Good Flexibility: High viscosity, no hazardous substances, automotive high temperature tape wiring harness tape has good flexibility, anti-tear. Size: (L) x (W) 9mm x25 m, 19mm x15m, 32mm x 11.5m (Optional)
• ☆ Easy To Operate: Low temperature is not hard, easy to operate,automotive harness tape wiring harness tape has excellent stain resistance, aging resistance, also has a certain isolation minus sound effects. Hand tear, easy to operate, winding harness, specifically for the automotive industry
• ☆ Wide Application: This automotive wiring harness loom tape can be used in the engine compartment and the passenger compartment harness machine after conversion winding insulation and protection. Ideal for automotive interior parts of the harness use noise reduction, such as the dashboard wire harness and main harness wound
• ☆ What You Will Get: We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care! If you have any issue about the item, please contact us by e-mail, we will try our best within 24 hours to reply

User questions & answers

Question:	Can this tape be used to wrap automotive wiring harnesses
Answer:	Yes. It is specifically designed to be automotive wire harness wrap tape.
Question:	Can it work on a handle of a pot for a gas stove
Answer:	Not a good idea. Get a real pot handle cover for that. This stuff is adhesive backed and only good to maybe 300f.
Question:	Is this tape easy to peel off
Answer:	Yes. It is easy to remove.
Question:	What is the max temperature rating of this tape
Answer:	The operating temperature range is -40-150 ° C, the maximum rated temperature is 150 ° C

Product description

The ATack Aluminum Reflective Foil Duct Tape is a heavy-duty metallic tape that was manufactured to take a beating. It is flame retardant, weatherproof and is resistant to rust, corrosion and abrasion. This makes the ATack Aluminum Tape the most optimized adhesive tape for duct work, AC-insulation, HVAC, furnace and other metalworks.

The concern with most Aluminum Tapes is that most have a weak adhesive and tend to fall off days after it has been installed. Some are hard to bend and conform with the surface. Our patented silicone composite adhesive solves this problem by being strong and stable while still being gentle and residue-free to almost all surfaces. This allows the our aluminum tape to adhere strongly to the pipe and even take the form of the surface perfectly, may it be corrugated joints, irregular corners or awkward pipe fittings that may have been otherwise hard to reach.

Why Should You Choose The ATack Aluminum Tape?

● Quality tested to ensure that it can resists extreme weather conditions- UV, flame, snow, freezing temperatures, sunlight and moisture.

● Sports an easy release adhesive liner and curling resistant aluminum backing, making it fast and easy to manage and install.

● Removable and repositionable, meaning that you can easily reposition it if you change your mind.

● -Meets UL 273 standards for thermal and ducting repairs. Wide thermal operating range of 25°C to 190°C (-13F to 374F).

● High coefficient of heat transfer allows it to be an excellent thermal insulator. Does not stain and does not leave a sticky residue behind.

Why Choose the ATack brand?

We follow a set of strict laboratory and manufacturing standards which are accredited by ISO 9001. Also, our customer service team will accommodate you any time of the day on your inquiries—even for products which have been purchased many months ago. This is what a true worry-free purchase means.

• Insulating Aluminum Tape that is optimized for extreme humidity and temperatures from -25°C to 190°C (-13F to 374F).
• Residue-free and quick-release adhesive liner enables the AVERAGE AMERICAN with LITTLE TO NO EXPERIENCE in repair to produce PROFESSIONAL-GRADE sealing, both in looks and functionality.
• Facilitates better energy insulation, making this aluminum foil tape ideal for insulation, heat sinks, AC-units, ducting joints, heaters and vents.
• Conformable and pressure sensitive reflective foil tape adhesive enables it to fit on corrugated joints. Bonds excellently to metal, plastic, copper, ceramic and concrete.
• This Metallic Furnace Duct Tape for HVAC and duct work is ideal for sealing hot and chilly air ducts, repairing seams and insulating duct pipes. Excellent vapor and temperature barrier.

User questions & answers

Question:	Planning on putting a 5x3 reducer/increaser on my vent stack to my offset smoker. Want a good seal around my vent will this be good for high heat
Answer:	In my opinion yes . I put around my metal dryer vent and it hasn’t leaked at all since I did it a few months back.
Question:	Is there an user manual
Answer:	Hello hawxhurst t., Thank you for sending an inquiry. Yes, indeed. Every purchase of the ATack Aluminum Tape comes with an instruction manual which you can download with the accompanying email that we will send out to you (which contains the tracking link, delivery date, and other essential information regarding your order). We hope that we have answered your question, hawxhurst t. Please don't hesitate to contact us should you have any further inquiries. Have a nice day ahead!
Question:	reflective or non-reflective. Description says the first, label on tape says the second
Answer:	Hello Davilyn Eversz , Thank you for sending an inquiry. We are sorry for the typographical error on the label. It should be reflective. The ATack Aluminum Foil Tape has a glossy and reflective surface. We hope that we have answered your question, Davilyn. Please don't hesitate to contact us should you have any further inquiries. Have a nice day ahead!
Question:	Can this tape be used for gas cooktop install in solid surface counter top
Answer:	Thank you for sending an inquiry, Roger. Yes, indeed! The XFasten Aluminum Foil Tape operating temperature limit is at 400 degrees F which makes it perfect for gas cooktop installation on a solid surface countertop. That being said, to make it more flexible, the ATack Aluminum foil Tape is 3.6mils in thickness. If you want a thicker aluminum surface, then we recommend applying 2-4 layers of the Aluminum Tape. We hope that we have answered your question, Roger Mcgehee. Please don't hesitate to contact us should you have any further inquiries. Have a nice day ahead!

• High Temp Tape, Elegoo 4 Pack Polyimide High Temperature Resistant Tape Multi-Sized Value Bundle 1/8’’, 1/4’’, 1/2’’, 1’’ with Silicone Adhesive for Masking, Soldering,
• HN Polyimide polymers film exhibits an excellent balance of physical, chemical, and electrical properties over a wide temperature range
• With silicone adhesive for easy release and leaves no residue after peel away
• High performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties
• Wide range of applications for masking circuit boards, soldering ,electrical insulation and splicing wires

User questions & answers

Question:	I want to put this on a tape dispenser. what size is the roll inner diameter
Answer:	3.0112inches.
Question:	I have a small 4 wire rgb cable on waterblock & the Red wire came unsoldered, will this help hold the 4 wires down after I resolder the loose one
Answer:	Yes, the High temperature tape can be used to fix RGB after soldering
Question:	What is the thickness of the tape
Answer:	-Substrate material: Polyimide polymers film -Glue Type: Silicone -Substrate material thickness: 0.025mm -Thickness with adhesive: 0.05mm -Adhesive strength: 4.5N/25MM -Tensile Strength: 135N/25mm -Elongation: 35 % -Temperature Range:-73°C – 260°C (-99°F - 500°F)
Question:	Would this tape hold a 2.5" SATA SSD inside a laptop? If not, what do you recommend? My laptop has a slot for one, but no bracket to hold it in place
Answer:	This is not really a strong adhesive tape and is intended primarily as an electrical insulator. 3m automotive foam mounting tape would be a better choice if you can’t find a proper carrier tray.

Product features

Elegoo Polyimide High Temperature Resistant Tape

• Substrate material: Polyimide polymers film
• Glue Type: Silicone
• Substrate material thickness: 0.025mm
• Thickness with adhesive: 0.05mm
• Adhesive strength: 4.5N/25MM
• Tensile Strength: 135N/25mm
• Elongation: 35 %
• Temperature Range:-73°C – 260°C (-99°F - 500°F)

Assortment of 4 Sizes High Temp Tape

Multi-sized high temp tape makes it much easier to wrap sensitive things.No need for doubling up on narrow tape or trimming tape that is too wide. Just grab the right size roll and go.

Strong Silicon Adhesive Protection

No residues left after you peel them off and they always holds tight throughout the tape’s rated temperature range.

High Temperature Resistance

Polyimide polymer films provide great insulation and protect the nearby component from excessive heat from the hot air rework.

Wide Applications

From insulating circuit boards to high-temperature powder coating, you can use ELEGOO high temp tape in all your projects that involve harsh heat environment.

Package List

• 1/8 inch high temp tape with 36 yards
• 1/4 inch high temp tape with 36 yards
• 1/2 inch high temp tape with 36 yards
• 1 inch high temp tape with 36 yards

Product description

Our Strength:



Our heat temperature tape is made of durable polyimide film with strong silicone adhesive. Perfect for using in electronic products, soldering and circuit boards



Wide application, etching, fiber optics cable, insulating circuit boards, manufacturing semiconductor, high temp powder coating, etc.



Product Features:



· Material: polyimide film



· Glue Material: silicone



· Color: Transparent brown



· Temperature range: up to 280℃(536℉)



· Size: 2/5 inch*108 ft



Package:



6 x high heat tape

• High Temp Tape - Selizo heat tape is compatible in a wide temperature range of up to 280°C (536°F), with the ability to maintain its unique combination of mechanical properties under the harshest of conditions, the high heat tape is great for applications where extremes of heat and vibration
• EXCELLENT ADHESION - The heat transfer tape made from polyimide film with silicone adhesive, it is easy to stick and not easy to break while peeling. Works well in coffee mug press, Heat press, T shirt application or other Thermal transfer printing
• LEAVES NO RESIDUES – Our heat resistant tape for heat press offers excellent resistance to no residue after peeling off. Even uneven surfaces can be easily wrapped with heat resistant craft tape
• APPROPRIATE SIZE - The heat resistant tape is 2/5 inches in width and 108 ft in length per roll. Not too wide nor too narrow. Long enough heat press tape can meet daily needs in different situations, such as keep your design in place when you making shirts and hats heat resist tape
• WIDELY USE - Heat tape for heat press is not only suitable for sublimation on coffee cups, but also ideal for heat transfer vinyl on T-shirts, pillows, clothing, fabrics. Great craft heat tape for all kinds of DIY projects

User questions & answers

Question:	What size tape dispenser does this fit
Answer:	https://www.amazon.com/stores/Officemate/page/31B8D836-0B11-4E96-B76F-01CC983BE0A5?ref_=ast_bln

• Color: mainly tawny. Material: durable polyimide and silicone.
• Size: Width: about 12mm; Length: about 30m /100ft. Heat resistance: about 280°C.
• High insulation, high temperature resistance, acid and alkali-resistance, low electrolysis, mechanically sound, crocking resistance, tear-resistance, without rest on surface when tear
• Ideal for protecting sensitive printed circuit board (PCB) components such as gold leads and gold fingers during the process of wave soldering.
• Also extensive use as electrical insulation for transformer, motor, coil, capacitor and frequency conversion power supply in electronic industry.

User questions & answers

Question:	Dryer vent pipes
Answer:	would work if pipes have a clean surface to stick to since the tape glue stays thin to enable heat resistance, and it can deff handle high heat, i expose it to 140°F to 200° and retains its shape and hold.
Question:	Can this tape be used for stove/oven
Answer:	I am not sure what your application for stove/oven... but if you mean use it as heat blocking then it doesn't .
Question:	Does anyone know if this is the same "high temp tape" you can use with heat transfer vinyl/heat press
Answer:	Yes
Question:	Is this electrically conductive
Answer:	no its meant for high voltage wires power supply's etc i use it for my 3d printers heat block

Product features

MS WGO High Temperature Heat Resistant Tape

• Substrate material: Polyimide polymers film
• Glue Type: Silicone
• Substrate material thickness: 0.025mm
• Thickness with adhesive: 0.05mm
• Adhesive strength: 4.5N/25MM
• Tensile Strength: 115N/25mm
• Elongation: 50 %
• Temperature Range:-73°C – 260°C (-99°F - 500°F)
• Breakdown voltage:Min 4KV

High Temperature Heat Resistant Tape

• Leaves no residues after you peel them off
• High temperature application (over 450 F)
• They always holds tight throughout the tape’s rated temperature range

Leaves no residues

• No brittle after heating
• Heat resistant tape is a polyester film tape with a high temperature resistant adhesive.
• Used in various electrical/electronic product manufacturing processes due to its' excellent heat resistance and electrical insulation.
• Short period Heat Resistance:260℃
• Long period Heat Resistance:220℃

liquid crystal

Microelectronics

Space flight

Electrical equipment