12 best big bargain 3d printers

• 【2K Micron-Level Accuracy】High Precision LCD 3D Printer with 2k HD masking screen at 2560x1440 resolution and 47.25µm pixel size, 30W Powerful UV light for fast printing, ensuring 4s per layer.
• 【Safe Air Filtering System】 Double fans and active carbon air filtering system deodorizes the odor from resin. Special FEP release flm tightened from both sides, prolonging service life; Quickly remove residues from the resin vat with the removal of release flm.
• 【Anti-Aliasing Effect】LD-002R adopts the 405nm wavelength UV light source, LCD light bulbs in parallel matrix provide uniform light with light evenness up to 90% Reflective cup improves light concentration and even ilumination. Stable light source decides higher print success rate, providing better printing performance since the matrix illumination provides better uniformity, higher intensity and shorter time of curing.
• 【Convenient and Fast Leveling】Four hex screws feature on the print plate — loosen them before dropping the plate, and it will align to the level of the screen. Tighten and start to print within 5 minutes after assembly.
• 【Fast Slicing Software】Easy to operate and preview the printing process. Fast CHITUBOX Slicing Software allows you to quickly output 30Mb .stl model files within ONE minute.

User questions & answers

Question:	Does it come with resin
Answer:	If your dremel hotend can handle 1.75mm filament and can run at 240 degrees than it should work fine. A heated bed is recommended for PETG.

Product features

Air purification function Double fan and active carbon air filter system deodorize the resin.

Slicer software: ChiTu DLP Slicer Printing technology: Light curing of LCD display 30W UV light for high speed printing LCD screen 2k [2560 * 1440] Connection: USB operation: 3.5 inch touch screen Light source: UV integrated light (wavelength 405nm)

High-speed CHITUBOX slicing software

The LD002R uses a second generation version of CHITUBOX slicing software to provide an exceptional user experience. CHITUBOX takes just 1 minute to slice a 30Mb .stl model file, while open source slicing software takes up to 10 minutes.

Convenient to clean resin vat

Special FEP release film, tightened from both sides, prolongs service life. Remove the release film and quickly remove the residue from the resin vat.

Infinite creativity in mass printing

• Maximum modeling size 119 * 65 * 160mm (length, width, height)
• Give you an incredible creative space.

Stable Z axis movement of ball linear rail

Ball linear rails ensure that the Z axis moves, eliminating waviness in the final print, creating a smooth surface and delicate texture.

Easy to print

The 3.5-inch color touch screen with the second edition Creality system makes offline printing easy. Compatible with all Windows XP and later systems

Offline printing

The Creality LD002R has an integrated computer board for printing directly from USB. You do not need to be connected to your computer while printing. Simple and fast.

• 1 KG (approximately 2.20 lbs) Spool
• 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
• PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant
• Recommended Extrusion/Nozzle Temperature 180°C - 220°C
• Spool Diameter: 7.88" - Spool Width: 2.69" - Spool Hub Hole Diameter: 2.20"

User questions & answers

Question:	does it work with the M3D
Answer:	This filament can be used on the M3D, but it will not fit within the machine because the spool is too large.
Question:	Can somebody weigh an empty spool for me? How many grams is the spool
Answer:	I have some empty spools that are 300g and some that are 245g
Question:	What temperature should I print this color filament at
Answer:	From 210 to 225 is what I set it at on my printer. You will just have to play around with temps as every filament will react different even the same brand and color. Just be sure when you are done keep the PLA in a dry bag with the desiccant it came with.
Question:	how many meters is one spool
Answer:	Bear with me while I do some math on this one. From www.matweb.com, the average material density for PLA is 0.0473 pounds per cubic inch. So, a spool weighing 2.2 pounds should have 46.511 cubic inches in it. With a filament diameter of 1.75mm (0.06889 inches), the cross sectional area should be 0.003727 square inches. 46.511 cubic inches divided by 0.003727 square inches = 12,479.6 inches in length, or 316.9 meters. Does that seem about right?

Product features

Tech Spec

Each package of PLA Black contains a 1 kg (~2.20 lbs) spool at 1.75 mm filament diameter with a dimensional accuracy of +/- 0.03 mm). We recommend printing at a nozzle temperature of 180°C - 210°C (356°F - 410°F).

Multi-Use

Make more than just models with 3D printing! Design and bring to life your inventions and other functional pieces for use in everyday applications like custom phone cases, wallets, salt shakers, sculptures, candle holders, dog tags and tons more. The sky's the limit! Your creativity begins with Hatchbox filament.

Performance

Polylactic acid is loved for its easy, odorless printing with minimal warping. With no heated bed necessary, Hatchbox PLA is a green-friendly choice that can be used with many styles of printing to create strong, smooth and glossy prints in a variety of bold colors.

Innovation

At Hatchbox, we are proud to provide the tools you need to innovate in life and in work whether a seasoned printer or just starting out. We help you push your ideas forward with the best in 3D printing materials so you can make your designs a reality.

Quality

Hatchbox 3D filaments are loved by the printing community for their high-quality composition, offering clog, bubble and tangle-free printing. Every spool is assured to offer the highest caliber of performance possible. That’s the Hatchbox promise.

Materials

No matter what your latest project calls for, we have a filament to suit any need, from heat resistance and durability, to flexibility and odorless extrusion. Our exhaustive catalog provides the choices you want to help you get the job done quickly and easily.

Colors

One of the most important factors of any print comes down to color. Hatchbox 3D colors are bold and vibrant. Mix and match bright primaries and nuanced hues with gloss, textured, sparkle, transparent, and even wood and marble-mimicking filaments.

Reliability

Trust all of your prints to Hatchbox! We strive to make 3D printing an enjoyable and error-free process for our customers. That’s why each filament is carefully formulated and thoroughly tested to save you time and effort every time you print.

• Recommended Extrusion/Nozzle Temperature 190-220℃, Heat bed 50-60℃, Print Speed 30-90mm/s
• Dimensional Accuracy and Consistency, Diameter tolerance at +/-0.03mm, Net weight 1kg (2.2lbs) filament
• No bubble, Tangle-free, Clog-free
• Vacuum sealed with desiccant. Bonus - an extra reseal bag for storing used filament and a notecard
• After-sales service: Find us from the card, any question will be provided with a satisfactory solution

User questions & answers

Question:	What is the difference between pearl white, snow white and white? They look identical in the images
Answer:	Hello and thank you for your question. Finder is not compatible with ABS materials. Please purchase the PLA material in 0.5 KG D Series in our other listings.
Question:	Can this print out as flat black or does it have a sheen
Answer:	Yes it does.
Question:	Would this be good for printing lithopanes
Answer:	Can’t speak for the ender 5 pro but it works great on my ender 3. Make sure to surf the internet for the best settings. Petg can be tricky to print.
Question:	is it a food safe filament
Answer:	Box and manual states it was made in the Netherlands.

Product features

NEW RELEASE! -- To explore more possibility with our new filaments!

• Popular Shiny Color in PLA 3D Filament: Shiny Emerald Green, Shiny Pearl White, Shiny Silk Purple, These colors are very suitable to print beautiful 3d printing shiny items
• Print Easily: Melt well and Feed Smoothly, Silk-Like-Feel - Silky shinny surface with silk luster, giving smooth, pearly and unique touch
• Strong Compatibility: 1.75mm Diameter, Universal Compatible with Diverse FDM 3D Printers in Market, Suggest Heat Bed 50-60℃, Suggest 3D Printing Temp:220℃
• Tangle-Free Tips: All of Our Filament are 100% Tangle-Free before Unopened, Pls Insert Free End of Filament into Spool Holes to Avoid Being Tangled for Next Time Use
• Package & Warranty: Contains 3 Spools, Each Spool Contains 0.5kg Filament, Total 1.5kg Filament in One Box. Within 24 hours Response,100% Satisfaction Guarantee

User questions & answers

Question:	Would you be willing to sell rolls outside of a set so that we can mix and match colors we need, rather than having to buy full sets
Answer:	Hello and thank you for your question. Yes, Creator Max is compatible with PETG material and the spool for this filament fits to the Creator Max as well.
Question:	The description lists 3 spools with 0.5kg of filament each. Why, please, does the description also say the total is only 1.1kg
Answer:	Be careful! Make sure your Flash Forge model is listed in the filament description. The filament diameter almost always works, but the filament spool outside diameter or inside hole diameter is sometimes not compatible with specific models. Then you have to rewind it onto an empty spool if you can or send it back. Didn't know filament buying could be so complicated. We have not tried this one yet and I cannot verify its compatibility right now.
Question:	Would you be willing to sell rolls outside of a set so that we can mix and match colors we need, rather than having to buy full sets
Answer:	Hello, thank you for your question. All the FlashForge PLA filament in 0.5 KG fit Adventurer 3, Finder, Dreamer, Inventor, Inventor 2, and Inventor 2S.
Question:	Any chance you guys could start selling full 1kg rolls of this stuff? I've fallen in love with the look of your gold filament
Answer:	Hello, thank you for your question. All the FlashForge PLA filament in 0.5 KG fit Adventurer 3, Finder, Dreamer, Inventor, Inventor 2, and Inventor 2S.

Product features

Beautiful Shine Colors: Silk Luster Surface

Most Popular Shine Colors; Strong Compatibility

It Supports Diverse FDM 3D Printers in Market Very Well !

Recommended Printing Temperature: 401-446℉（205-230℃）

Recommended Printing Speed: 30-60 mm/s;

Recommended Heat Bed: 122-140℉(50-60℃)

MIKA3D Silk PLA Filament Bundle Shining Beautiful

Do you like your 3D Printing Items with Silk Shiny Feeling?

MIKA3D Silk Filament Bundle will Support Your 3D Printing Much Better; The Finished Parts with Silk Shiny Surface after 3D Printing

Package: Each Spool Packed by Vacuumed Sealed Zipper Bag, This Zipper Bag Can Reseal Filament Again

Quantity: 3 Spools in one Package, Each Spool Filament Net Weight is: 0.5kg(1.1lbs), Total 1.5kgs(3.3lbs) in this Package

Product description

Product Description

Material: Acrylic

Color: Black

Notice:

There is a Film cover the Bracket,please tear off it before you are going to use it

Package Included:

1xFilament Mount Bracket

• Made of high quality acrylic, stable, durable
• The holder tube is made of 3d pla filament
• Peel off the sticker before you assemble it
• Suit for 1Kg PLA ABS 1.75mm 3.0mm 3d printer filament
• 1PC 3D Filament Mount Rack（Not including the filament)

User questions & answers

Question:	What is the diameter of the cylindrical mount
Answer:	No, resin was not included.
Question:	Can this be used to hold a spool of weed wacker string
Answer:	Hello, With the new high-temp nozzle, yes it is able to print with the PETG. We have not gotten confirmation yet on if it can print with PC. With the current regular nozzle, it can only print with PLA based / ABS filament. Thank you.

Product description

The Dremel DigiLab 3D20 Idea Builder 3D Printer is Dremel's most reliable low-cost 3D printer for hobbyists, tinkerers and other users new to 3D printing. The simple design of the printer along with Dremel support team will help you succeed at 3D printing, even without prior experience! The printer comes fully assembled and includes a 0.5 kg spool of Dremel filament. The easy to follow quick-start guide and detailed instructions will help you begin printing right out of the box. Immediately, you will notice the attention to safety with the rigid, fully-enclosed design and 3rd party UL approval. The printer is designed to print with PLA filament onto a non-heated build plate that uses black build tape to help your prints adhere to the build plate. You can begin your printing with the high-quality models pre-loaded on the printer, which can be accessed through the 4” full-color touch screen. You can load your own files from sites such as Thingiverse, with the included Dremel 3D slicer software. An upcoming update will allow the 3D20 to use .gcode files so you can use Dremel Digilab 3D Slicer, Cura, Craftware, KISSlicer, Simplify3D, Slic3r, Repetier, and other programs to load your print files. Once you start slicing your own files you can take full advantage of the 9” x 5.9” x 5.5” build plate and 100 micron high resolution. The simple design of the extruder allows for easy maintenance with continued use of the printer. With 85 years of reliable quality, Dremel is an established brand that you can trust to support you throughout your journey. By purchasing a Dremel 3D printer, you will have access to Dremel video tutorials as well as unrivaled Dremel customer service. All the help you need will be just a quick email, live chat or phone call away. This is Dremel's most affordable 3D printer and is perfect for new users or for students. Electrical Input Rating - 120 V, 60 Hz, 1.2 amp.

• Countless hours of high quality printing with the most reliable low-cost 3D printer
• Quickly and easily make your 1st print out of the box with completely pre-assembled printer, included 0.5 kilogram spool of filament and clear setup instructions. Maximum build depth (inches): 9
• Far superior safety compared to competition with fully enclosed design, non-heated build plate, PLA-only printing and 3rd party UL safety approval
• Compatibility with brand new Dremel Digilab 3D Slicer based on cura, the industry leading open source 3D printing software and gcode files so you can use your favorite slicer
• Accompanied by unparalleled local Dremel customer service support and industry’s best 1-year warranty. Extruder temperature: Up to 230°C /397°F

User questions & answers

Question:	Will this work with .obj files
Answer:	Yes. The Dremel 3D software is compatible with both .OBJ and .STL files.
Question:	Does it use a Proprietary filament or can it use any standard 1.75 PLA purchased from Amazon
Answer:	According to Dremel -> The Dremel 3D Idea Builder was designed and optimized for use Dremel PLA filament. Other filament may cause damage to the machine and will void the warranty.That being said because the filament by Dremel was not available at the time I did my review and I ran out of the original dremel filament I did buy replacement filament by 3D Solutech (1.75 PLA 2.2lbs spool) and will confirm it works. The spool does not "lock" into the printer, however it does fit in the spool grooves and still rotates and feeds into the print head with no issues. Just know that going non-dremel brand you may lose your warranty. You could if you wanted to wind filmant onto the dremel spool and get it to "sit/lock" correctly if you are concerned about it. For me it works perfect without locking it in and placing it in the spool groove at the bottom of the printer.
Question:	what can't the 3d printer make
Answer:	Puppies. Unless you are talking about small plastic puppies. Then it can do that. Real puppies though, not at all
Question:	Is it possible to print a copy of this Dremel 3d printer so I could then reurn the original printer to Amazon and just use the printed printer
Answer:	Yes, but dont stop there... you can create copies with the copies. After only a few generations you will have thousands of printers and can retire rich!

Product features

Best-in-Class Reliability

The Dremel 3D20 is the most reliable consumer-grade 3D printer on the market. Every Dremel 3D20 has been rigorously tested to ensure reliable printing time and time again. Furthermore, Dremel filaments are specifically engineered to optimize printing.

Get Started Immediately

It’s quick and easy to begin 3D printing. Our open system gives you the ability to download and print free models from around the web. You can also create your own designs by using any CAD software to bring your imagination to life.

Trusted By Makers

Makers have trusted Dremel since 1932 because of the quality and versatility of our products. We have been there for you over the years, and we will continue to be there with you in the future. Make More!

Full-Color LCD Touch Screen

Interact directly with the 3D20 through its full-color LCD touch screen. The interface allows you to modify settings, lookup files in the SD card, and print in a smooth fashion.

Fully Enclosed

The 3D20 is fully enclosed to maximize the printing success rate by creating a stable temperature inside. This also protects children from sticking their hands into the work area during prints.

PLA Filament

Dremel’s non-toxic, recyclable, plant-based PLA filament is safe to use at home and around children. It has been engineered for optimal printing, producing a stable, strong object with a high-quality finish.

Industry's 1-Year Warranty

If something goes wrong with your 3D20 3D printer, rest assured that we will have your 3D printer fixed in no time at no cost to you. Know more in our official website.

More Than Just A 3D Printer

In a world full of 3D printing startups, Dremel provides you with an entire ecosystem of benefits that goes beyond the 3D printer hardware. In addition to our reliable 3D printer, you will get our:

• 【Premium 3D Printer PLA Filament】Clog-Free, Bubble-Free, Tangle-Free, Low warping, perfect 3D Printer PLA Filament 1.75mm for smooth and stable 3D printing experience, making printed parts an outstanding surface finish.
• 【4 Colors 3D Printer PLA filament】Comes with 1KG/2.2 lb 1.75mm 3D Printer red, white, blue and black PLA filament bundles, 0.25KG/Spool 4 Colors. Note: The roll hole in the middle of the filament is 1.26 inch/ 32 mm, please check whether it fit on the holder of your printers before you order it, the spools may not fit on the holder of some printers.
• 【Dimensional Accuracy & Consistency】LABISTS 3D Printer PLA Filament, 1.75 mm in diameter, Minimum demission tolerance +/- 0.02mm to ensure consistent feeding and smooth printing.
• 【3D Printer PLA Filament Using Tips】Recommend Printing Temperature: 200℃-230℃. Recommended Print Speed: 50-100mm/s.
• Note: The roll hole in the middle of the filament is 1.26 inch/ 32 mm, please check whether it fit on the holder of your printers before you order it, the spools may not fit on the holder of some printers.

User questions & answers

Question:	Is 1k each
Answer:	The weight of the filament should be 1kg. The spool should be extra. If not it should not weigh more than 40 gram.
Question:	Is this food safe
Answer:	Generally 10 kg. They add the +1 in case more of it gets past quality control.
Question:	will this work with a 3d pen
Answer:	It does have fibers in it not just "colored". It will wear brass tips out fast. Plan to change it after 30 to 40 hrs of printing. I've used 3 rolls of it so far and love the color and the way it prints. Does take some tuning on the settings. And I've found 0.6 nozzle doesn't plug like a 0.4 does with carbon fiber.
Question:	I am new to this. I don't see how long it is? How long do you need to make a few items
Answer:	I'm pretty sure this is just carbon fiber "colored" filament. That is why the seller won't answer this question. To print with real carbon fiber, even if its just added to PLA is not easy and requires special settings and hardware.

Product features

LABISTS 4 Colors 1.75mm 3D Printer PLA Filament Offers You Smooth & Stable 3D Printing Experience!

Note: The roll hole in the middle of the filament is 1.26 inch/ 32 mm, please check whether it fit on the holder of your printers before you order it, the spools may not fit on the holder of some printers.

Do Not Hesitate to Choose LABISTS 4 Colors 1.75mm 3D Printer PLA Filament

• √ 0.25KG/Spool, 1kg/2.2lb in total, 4 colors 1.75mm red, white, blue and black PLA filament bundle with wonderful 3D printing illusion to meet different printing demands.
• √ LABISTS 3D Printer PLA Filament, Minimum demission tolerance +/- 0.02mm to ensure consistent feeding and smooth printing.
• Note: The roll hole in the middle of the filament is 1.26 inch/ 32 mm, please check whether it fit on the holder of your printers before you order it, the spools may not fit on the holder of some printers.

• ✅【Lower Odor】 NOVA3D photopolymer 3d resin specially formualated to decrease smell. Minimal dripping and weeping than some of resin your used.
• ✅【Great Stability】This 405nm standard resin was designed to significantly reduce printing time with its excellent fluidity, work excellent with most of LCD 3D printer.
• ✅【Wide Applications】Compatible for most LCD DLP 3D printers. Apply to DIY, jewelry design, classroom teaching and garage kits making etc. Afforable price to save your cost to your hobby.
• ✅【Pure and Vivid Colors】This UV curing 3d resin high quality pigments inside, it make the print works show bright and stunning color effect. It's a truly black resin and the color is very deep and consistent to the model we’re showing.
• ✅【Quality Guarantee】We pride ourselves on providing caring service, both before and after the sale. Our support will respond to all inquires within 24 hours, excluding some holidays.

User questions & answers

Question:	Can I use this resin to to other brand printer
Answer:	They REALLY should. I've no idea why they think this is a good business model. There are several colors I would like to buy from them, but have no need for the other colors in the bundle, so I'm not purchasing any. I did order ONE set that I badly needed a color of, but will probably be the ONLY time I'll do that. Seriously, they could have sold easily 6-12kg in rolls to me by now - and more in the future - if they'd simply let me pick the color I want rather than force 2 more down my throat that I don't need. Instead, they've sold me 1.5kg and I likely won't be buying any more. VERY bad business model.
Question:	Will this resin work for making very large prints in my Phrozen Transform
Answer:	dear customer， Thanks so much for you like our gold silk pla filament; we will suggest our factory to offer 1kg spool 3 bundle soon; do you interested? Thanks Waiting for your kindly reply Mike
Question:	What are the best print settings for this resin? nova3d slicing app doesn't have rapid resin available
Answer:	I hope so. I love their filaments the first time I tried it. It arrive relatively fast, packaged well. It car with a build surface sticker for free and most of all it prints nice and clean and need I say... it sticks to surface of my build plates I used PEI and borosilicate glass.
Question:	Does the white stay white after it cures? I have been using the elegoo white, and it kinda browns after curing
Answer:	We're sorry that we only have 200*200 mm build plate for now because of the dimension of the package box.

Product features

Elegoo mars

Layer Height：0.03mm

Bottom Layers: 8

Bottom Exposure: 60s

Normal Exposure: 8s

Anycubic Photon

Layer Height：0.05mm

Bottom Layers: 6

Bottom Exposure: 45s

Normal Exposure: 8s

Phrozen Shuffle

Layer Height：0.05mm

Bottom Layers: 8

Bottom Exposure: 50s

Normal Exposure: 8s

QIDI Shadow 5S

Layer Height：0.05mm

Bottom Layers: 8

Bottom Exposure: 50s

Normal Exposure: 8s

NOVA3D 3D Printer Standard UV Photopolymer Resin

This photopolymer resin compatible for most LCD DLP 3D printers.

Suggest setting to NOVA3D Printer:

Z-Resolution：0.035mm Bottom Layers: 5

Bottom Exposure: 30s Normal Exposure: 6s

NOVA3D 3D Printer Standard UV Photopolymer Resin

NOVA3D UV curing 3d resin for LCD DLP 3D printer with low odor & high quality pigments inside, it make the print works show bright and stunning color effect.

This 405nm photopolymer resin compatible for most LCD 3D printers.

Please store it stay away to direct light and do not store on the curing machine long time.

NOVA3D 3D Printer Standard UV Photopolymer Resin

NOVA3D UV curing 3d resin for LCD DLP 3D printer with low odor & high quality pigments inside, it make the print works show bright and stunning color effect, it vivid and pure colors makes your models more beautiful.

Please cure the residue resin before you recycle it.

NOVA3D 3D Printer Standard UV Photopolymer Resin

NOVA3D UV curing 3d resin for LCD DLP 3D printer with low odor & high quality pigments inside, it make the print works show bright and stunning color effect, it vivid and pure colors makes your models more beautiful.

Shake well before use and please wear gloves when deal with the resin.

NOVA3D 3D Printer Photopolymer Resin

It means you fully understand and accept all points is this notice.

"Dealing with resin could be messy and risky sometimes. To ensure your safe and provide better user experience, please follow the instructions below" :

High Precision 3D Printer Resin, Odorless and Afforable

Product description

3d filament

• 1 kg (2.20 lbs) PLA Filament Vacuumed Sealed With Desiccant
• 1.75mm Diameter (Dimensional Accuracy +/- 0.03mm), The temperature range for this Filament Refills is 220-250 °C (428°F-482°F), Best temperature 235°C(455°F).
• Printing temperature: 190-220 °C (374°F-428°F), Best temperature 195°C(389°F)
• No Bubble and Block Nozzle, Nood Stick Hot Bed, A Smooth PLA Used
• Compatible with the following 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, 3doodler (pen), Delta, Mbot, Type A

User questions & answers

Question:	What do you recommend for clean up
Answer:	Scotch brightpad from dollar store while nozzle is still warm
Question:	Can these be used as palette knives for painting
Answer:	Unfortunately I know absolutely nothing about painting. These tools are used for prying pieces off older 3D printers and also cleaning the very hot extruder nozzle. They are certainly not a “quality” item but the knives are fixed to the handle solidly and the steel is flexible on the longer one if that is something you were looking for in painting.
Question:	Is the pantone designation identified for this color
Answer:	No, you need to go for better filaments for more consistent and rateable color tones
Question:	How transparent does this turn out
Answer:	I was surprised at how clear it is. I mean, obviously it is not nearly as clear as a pane of glass, but looking through the bottom layers (usually the clearest), I can very clearly see the infill pattern.

• Package Include: Total 44pcs MK8 3D printer nozzles, 0.2mm4pcs, 0.3mm4pcs, 0.4mm20pcs, 0.5mm4pcs, 0.6mm4pcs, 0.8mm4pcs, 1.0mm4pcs.
• Input Diameter: 1.75mm
• Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm
• Out Thread: M6
• Material: Brass

User questions & answers

Question:	Which carrier do they use for shipments
Answer:	Yes. The power supply has a 110v/220V DIP switch
Question:	Will this work with the makerbot replicator 2x
Answer:	This printer comes with silent motherboard,it can operate under 50 DB,is very quiet.
Question:	Will this fit tevo tornado
Answer:	Some of the units are equipped with after market modifications. You need to contact the seller to confirm description. YouTube is a good source of information about stock and modified units.
Question:	Will it fit creality cr-10 s
Answer:	Not stock. There are many videos on how to upgrade the firmware so that it can accept an add-on leveling probe.

Product features

44 Pieces MK8 3D Printer Nozzles 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Creality CR-10

• Recommended Extrusion/Nozzle Temperature 190-220℃, Heat bed 50-60℃, Print Speed 30-90mm/s
• Dimensional Accuracy and Consistency, Diameter tolerance at +/-0.03mm, Net weight 1kg (2.2lbs) filament
• No bubble, Tangle-free, Clog-free. Translucent colors allow light to go through.
• Vacuum sealed with desiccant. Bonus - an extra reseal bag for storing used filament and a notecard
• After-sales service: Find us from the card, any question will be provided with a satisfactory solution

User questions & answers

Question:	How is this quality
Answer:	Hello Jeff, Thanks for your question. The White is like a little translucent ivory. Snow White is solid white. Pearl white has a smooth surface like pearl. Hope that understandable for you. Thanks!
Question:	Is this going to ever be back in stock? Was my favorite translucent filament I've used
Answer:	It does have a sheen (not matte or flat). I've been very impressed with it however!
Question:	What temps are folks printing this on? i'm getting skipping with this filament, even randomly when i bump up to 235c (wanhao v2.1 all metal
Answer:	I’ve printed some excellent lithopanes but the problem is they have to be printed vertical for good results. Curved panes print well as is but flat ones are very difficult - unless - you add a support at each end in back. I use a triangle about 1.5 mm wide and go up about 1/3 the height. Where it touches the pane I make it to a narrow edge (0.2 or 0.4mm) so it is easy to remove after printing. You could probably get away with 1/4 the height and only 1mm wide but make sure they are at the sides if the pane. Don’t try just 1 in the middle (which would work) because it would mar the image. For the triangle I use a 60 angle at the bottom to save space and material.
Question:	Looks more yellow than orange. Is it? Any pics of prints
Answer:	Technically PLA plastic is food safe. That said it is not recommended to use 3D printed plastics for food applications. 3D printed parts are porous in nature meaning that can be very susceptible to bacteria and other 'yuck' to get into the part that conventional clean/washing will not get rid of. Their ways to handle this, just please do your research on methods for properly cleaning and ensure the 3D printed part is food safe. That non-sense aside, PLA plastic is generally food safe specifically when natural in color. Once dyes are added to color the filament that changes everything and depends on what the manufacturer used for the dyes. Good Luck

Product features

NEW RELEASE! -- To explore more possibility with our new filaments!

Product description

Specification：

Hardness: 79 D

Viscosity(25℃): 552 mpa.s

Curing wavelength: 405 nm

Liquid density: 1.1

Shrinkage: 7.1%

Solid density: 1.10 g/cm³

Tensile strength: 23.4 Mpa

Elongation at break: 14.2%

Shelf life: 1 year

Printing parameter:

LAFVIN 3D Printer Resin are perfectly on most brand LCD printer, and fast printing on DLP printers.

For LCD printer, bottom  layer 20-60s and each layer exposure time 5-15s.

The exposure time should be adjusted according to printer light energy, layer thickness and model structure.

• 【High Precisionhigh】High precision and fast curing available for LCD DLP 3D printer.the print works show bright and stunning color effect.
• 【Quick Curing】LAFVIN405nm Rapid Resin was designed to significantly reduce printing time with its excellent fluidity,it can shorten printing time and improve printing success rate.
• 【Wide Applications】LAFVIN standard resin is suitable for most LCD DLP 3D printers. Used in DIY, medical field, jewelry design, industrial design, construction, automobile, etc.
• 【Low odor】This resin is specially designed for 3D printers and has been formulated to perfectly reduce odor.
• 【Perfect packaging】The leak-proof bottle is perfectly packed by bubble bag and packing box to prevent resin from leaking.