13 best precision 3d printers

• REMOVABLE BUILD SURFACE PLATE: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
• SAFE POWER SUPPLY: Ender 3 Pro comes with a UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.
• RESUME PRINT FUNCTION: Ender 3 Pro can resume printing from the last recorded extruder position after suffering unexpected power outages.
• SEMI-ASSEMBLED KIT: This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. A fun STEM educational experience in mechanical engineering and electronics.
• WHAT YOU GET: Ceality Ender 3 Pro 3D pinrter, lifetime technical assistance and 24 hours professional customer service.

User questions & answers

Question:	What version is the board
Answer:	The newest version of the board is 1.1.5, it does not come with the printer though. Mine came with 1.1.4 which is very similar to the 1.1.3. Creality Sells the 1.1.5 separately right now as the Creality v1.1.5 Silent Main Board. It is $50 bucks and you might find it cheaper but it is a worthwhile upgrade. It has newer stepper drivers that make the stepper motors virtually silent. I can't hear them anymore only the fans now. The board also has thermal runaway enabled and has a boot loader preinstalled so if you wanted to switch to Vanilla Marlin or the TH3D software you could do so very easily. Installing this board and the TH3D software also made adding a BL Touch kit easy.
Question:	Will this printer print abs and petg also
Answer:	From the list of questions and answers on the product page, "Will this printer print abs and petg also? Answer: Yes, but for abs recommend getting a glass bed and an enclosure of some sort. By Cameron Moss on December 25, 2018
Question:	What is the physical footprint of this unit
Answer:	The actual base footprint itself requires a flat 12" x 12" surface, however certain parts such as the display panel overhang requiring a bit more space. A roughly 16" wide by about 20" deep space should be about right, although you will want to make sure both the back and front have an additional few inches to spare as the bed does move back and forth during operation. I mount mine on top of a 16" x 18" patio paver block for support and stability. I place the paver block over some dense foam that is cut about 1" in from the block edge (14" x 16"). This gives the printer a platform that helps contribute mass to absorb vibrations as well as offer a bid of noise reduction cause by sound transmission through the base. Placed a few inches from the back wall it also ensures the printer travel area remains clear. There is also YouTube video on using this technique if interested (not mine but I came across it after I came up with the same idea separately).
Question:	Does it come with any needed software? If so - what kind
Answer:	It does come with a very old version of Cura. The lastest version of Cura is what I am using. Just download it from https://ultimaker.com/en/products/ultimaker-cura-software/list. If all you are doing is downloading models and printing this is all you need. If you want to make your own 3D models that complicates things. There are many, many 3d modeling programs and which one to use is a very personal choice and each takes time to learn to use. Blender is free, Sketch-up is also I think. But there are commercial programs that can cost up to a couple of thousand to use. Zbrush, Studio Max, and others. This is list of most of them: https://all3dp.com/1/best-free-3d-modeling-software-3d-cad-3d-design-software/ Without a better idea what you are wanting to do, this is the best answer in a short space I can give.

Product features

Why choose Creality 3D Ender 3 Pro 3D Printer?

1. Fully Open Source: Allow users to improve their printer upon the source code and share the changes within the community, resulting in an improved experience for all.

2. Ideal Gift for Kids: This semi-assembled kit 3D printer is a perfect gift for kid, allow them to learn about the basic construction of 3D printers.

3. Ideal for STEM Projects: Invite imagination and innovation to student, help them discover the wonders of all the STEM fields.

Resume Printing Function

Ender 3 Pro can resume printing after power outage or any other unexpected stoppage.

Meanwell Power Supply

Branded power supply and high-watt hot bed ensure fast heating to the printing platform.

Upgraded Extruder Design

Greatly reduces the risk of clogged nozzle and bad extrusion.

• The X-Max with pioneered creation of two different ways for placing the filament. Ventilative printing or enclosed constant temperature printing for you to choose when printing the different types of filament.
• 5-inch full color touchscreen with intuitive icons makes for easy operation
• Build size: 300mm x 250mm x 300mm / 11.8" x 9.8" x 11.8"
• Full metal support more stable than plastic support;Aviation aluminum, CNC machining aluminum alloy
• QIDI TECH Professional Amazon after-service team,if you have any problem about our 3d printer,we will reply to you within 24 hours.Free one-year warranty.

User questions & answers

Question:	Does it stop if the filament runs out and wait for user to load new filament
Answer:	The printer currently does not have such function. So if the filament runs out, there will be no prompts or stop printing. Please load new filament directly to print.
Question:	Can a Filament Detector be added by user to the Xmax
Answer:	Because the machine has automemory...on power outages, I built my own filament detector. It serves two purposes: 1) It will detect the end of a filament at the sensor (basically a mechanical switch), and trip a relay which shuts down the machine; and 2) It cuts the filament in the case of a reel bind which then does (1) above. (this is done by a bend that pulls into a blade when the force is enough). Yes, it's a kludge. But when you are 10, 15, 22+ hours into a print (often overnight) and are not baby sitting it, this method has been a plastic and time saver. I am sure there are better ways, but this was a quick and dirty project after I had a spool bind up. While I normally use higher quality manufacturers, binding can and does occur, especially if the last person to swap out a roll wasn't careful and let the end loop under a wind. Those of you who have printed enough, know exactly what I am talking about.
Question:	Does this printer have filters for fumes
Answer:	There is a foam filter element over the cabinet fans. This does little more than filter the air blown into the build chamber, and is really unnecessary, for all intents and purposes. Consider it a dust filter for the inside of the printer. It has no impact on any fumes or particulates in the air escaping the printer during use..
Question:	Can it automaticlly stop if the filament runs out like bibo 3d printer
Answer:	No, it cannot. However, there is a pause and resume function, so you can replace/change filament mid-print, you just have to detect the correct time (or predict it in gcode) when the filament will be close to running out.

Product features

Double Z-axis:

Updated the Single Z-axis to Double Z-axis, more stable and solid for large size prints.

Innovative design of double z-axis motor structure with 4 pieces Imported 12mm axis.

Maximum print size is 11.8''x9.8''x11.8''(300(L)x250(W)x300(H)mm)

Newly Developed Extruder:

Two Sets of Qidi Tech Third Generation Extruder Assembly with Different Capability.

A extruder : For printing general material such as PLA, ABS, TPU ( already installed on the printer).

B extruder : For printing advanced material such as Nylon, Carbo Fiber, PC.

Two Different Ways for Place the Filament:

The first creation of the two different ways for place the Filament.

A. Place the filament outside: The filament feed more smoothly while printing PLA, TPU, PETG. It compatible with any brands of 1.75mm filament.

B. Place the filament inside: For printing advanced material such as Nylon, Carbon Fiber, PC, which requires an enclosed constant temperature printing.

5.0 inch Touchscreen:

5.0 inch touchscreen. Larger and user friendly interface makes it more intuitive and easy to operate.

Removable Plate:

Movable extraction, curved metal plate, can be used repeatedly, it is more convenient to remove the model after printing.

The plate's front side can print normal filaments, such as PLA, ABS,TPU,PETG.

The plate's reverse side can print advanced material such as Nylon, Carbon Fiber, PC.

Qidi Print Slicer:

The Qidi Tech latest generation slicer software version 5.0 : Redesigned UI interface of Qidi Print software is more convenient to operate. It has been changed the software's slicing algorithm and improves the print quality by 30 percent and speed by 20 percent. The Qidi Print software compatible with all types of Qidi Tech 3d printers, life-time free, the alternative to paid software ( If you have the old version, please download the latest version on Qidi TechI official website).

QIDI TECH One-to-one Service:

If any problems with the X-Max 3d printer, please contact Qidi Tech team and we will reply in 12 hours.

• ★★★★★【Friendly Reminder: There is one spool of red color PLA, one spool of white color ABS filament, please check the filament before printing and use the correct settings to print.】QIDI TECH 3D printer, equipped with the latest dual extrusion technology, occupied the overall leading position in education, engineering, design and home/hobby printing.
• X-Pro 3D Printer Kit features conditional breakpoint printing and upgraded 4.3 inch touch screen, Smarter and easier operation.Mute printing.
• Durable and high temperature resistance 6mm aviation grade aluminum build platform, can be heated up to 120℃. Removable curved metal plate make it more convenient to remove the model after printing, which is widely appreciated by users.
• The QIDI TECH 3D Printer with metal platform support rod, which upgraded to 12mm, and also including upgraded parts like motor, main board, and mechanical structure, ensuring more stable printing.
• Backed by with One-to-one QIDI TECH service. If you have queries about 3D Printer, feel free to contact our exclusive and fast support service team, we'll reply back to you within 24hours. Free one-year warranty is also guaranteed.

User questions & answers

Question:	Does this printer support Dissolvable Filament used for support
Answer:	The software provided gives an option to load PVA which is a dissolvable filament. While I haven't tried it, many reviews also indicate that the reason for the dual extruder is to allow for dissolvable filaments when printing supports for complex structures.
Question:	Can i use octopi or astroprint? people on fb say no b/c usb port is only for flash drives not for pcs or other devices. xpro owners, please verify
Answer:	While the newer model of this printer does not have a USB port capable of serial communication, you can attach a Raspberry Pi to the motherboard's UART header and then use Octopi to send gcode wirelessly to the printer. You will need a UART to USB serial adapter. I also used a usb step down voltage converter (24 volt to 5 volt) to power the Pi directly from the printer's power supply. There is one set of available 24 volt outputs on the power supply. I then mounted the Pi next to the motherboard with velcro strips and put everything back together. Works great.
Question:	Can Qidi X pro pause the printing automatically when filament runs out? I saw some printers have the filament run out detection function
Answer:	No. There is no filament run out detection.
Question:	Does this new product support ditto printing, override gcode temp, and changes to the temperature and speed during printing
Answer:	BIBO 3d printer supports the ditto printing. They called copy printing.

Product features

Dual Extruder Assembly:

Added four side air blow turbo fan, ensure better print quality.

Print precision: 0.05 -0.4mm

Print speed: 60mm-150mm

Nozzle max temperature: 250℃

It is capable of printing PLA, ABS, TPU, PETG and two colors printing.

Removable Plate:

Movable extraction, curved metal plate, can be used repeatedly, it is more convenient to remove the model after printing. And meanwhile, can minimize the damages or offsets to the build plate. Which is widely appreciated by users.

Heating bed:

6mm aviation grade aluminum plate

Can be heated up to 110℃

12mm enhanced guide rod

Power Breaking Point Function:

A break point can be saved and the printing can be continued later. If power outage is occurred during the printing process, the printer will automatically save the break point. Intelligent!

Slicing Software:

QIDI Print slicing software, unique auto slice function based on your time and quality preferences. Easy to use.

It can also compatible with simplify 3D software perfectly.

4.3 Inch Touch Screen:

4.3- inch touch screen with large and use friendly interface. During whole process, providing you real-time printing status, make it more intuitive, and more precise and easier to operate.

QIDI One-to-one Service:

If any problems with the X-pro 3d printer, please contact Qidi Tech team and we will reply in 12 hours.

• The X-PLUS with pioneered creation of two different ways for placing the filament. Ventilative printing or enclosed constant temperature printing for you to choose when printing the different types of filament.
• The X-PLUS 3D Printer Kit comes with two different types of extruder assembly. The extruder A had already been installed on the printer. The max printing temperature is 250C, and it can works well with PLA, ABS, TPU. And for extruder B, free to you if you need. The maximum printing temperature is 300C, and can print Nylon, Carbon Fiber, PC. (The latest development, free trial).
• Double Z-axis driver, ensures more stable and more precise printing quality when you print large model size. Higher configuration 3D printer.
• Latest slicer software version 5.0: Redesigned UI interface of QIDI software is smarter and more convenient to operate. It has changed the software's slicing algorithm and improves the print quality by 30 percent and speed by 20 percent. The QIDI software is compatible with all types of QIDI printer, life-time free, an alternative to paid software.(If yours is the old version, please download the latest version on QIDI official website).
• Backed by with One-to-one QIDI TECH service. If you have queries about 3D Printer, feel free to contact our exclusive and fast support service team, we'll reply back to you within 24 hours. Free One-year warranty is also guaranteed.

User questions & answers

Question:	Is the qidi 3d yellow banner removable? i understand branding, but it's a bit of an eyesore
Answer:	You can take it off but it will leave the glue on and it is a long process to remove.
Question:	Is the only difference between x-plus and max the bed size? i noticed the max doesn't list carbon printing - is that feature not available there
Answer:	The main differences between the X-Max and X-Plus are the build volumes (Max= 300x250x300mm vs Plus= 270x200x200mm) and the touch screen (Max=5" vs Plus= 4.3"). They both can print the same materials, including Carbon Fiber, Polycarbonate, PC/ABS, & Nylon using the Hi-Temp print head that has a hardened steel nozzle to prevent wear when using abrasive filaments. Hope that helps.
Question:	Is this a dual extruder printer like bibo 3d printer
Answer:	No, it is a single extruder. The additional extruder they include or send at customer request is an upgraded single extruder module.
Question:	How does this printer compare with the prusa i3 mk3? they are at the same price point but i would have to wait several weeks for the prusa
Answer:	The guy that sits next to me at work got the same Prusa kit. He feels like the QIDI X-Plus may out perform his. Also, my build capacity is a bit larger than his. He likes the PEI surface on the Prusa. My only mild complaint is having to exchange extruders for the over 250C range, but I think I get smoother prints with my low temp extruder that he does with the general purpose extruder on the Prusa. Also, he regrets not having an enclosure like mine has. We compare prints all day long, so after he spent an entire day and night building his & I was up and running in 10 minutes, I want to buy another one! I also got mine in 2 days & I have almost immediate answers from support 24/7, no matter how trivial. They are amazing! It took a couple of weeks to get the Prusa. He was so jealous!

Product features

Double Z-axis:

Updated the Single Z-axis to Double Z-axis, more stable and solid for large size prints.

Innovative design of double z-axis motor structure with 4 pieces imported 10MM axis.

Maximum print size is 10.6''x7.9''x7.9''(270(L) X 200(W) X 200(H)mm)

Newly Developed Extruder:

Two Sets of QIDI Third Generation Extruder Assembly with Different Capability

Extruder A : For printing general material such as PLA, ABS, TPU (Already installed on the printer).

Extruder B : For printing advanced material such as Nylon, Carbo Fiber, PC

Two Different Ways for Placing the Filament:

The pioneered creation of the two different ways for placing the Filament.

A. Place the filament outside: The filament feed more smoothly while printing PLA, TPU, PETG. It is compatible with any brands of 1.75mm filament.

B. Place the filament inside: For printing advanced material such as Nylon, Carbon Fiber, PC, which requires an enclosed constant temperature printing.

4.3 inch Touchscreen:

4.3- inch touch screen with large and use friendly interface. During whole process, you're well instructed on the touchscreen display, make it more intuitive, and more precise and easier to operate.

Removable Plate:

Movable extraction, curved metal plate, can be used repeatedly, it is more convenient to remove the model after printing. And meanwhile, can minimize the damages or offsets to the build plate.

The plate's front side can print normal filaments, such as PLA, ABS,TPU,PETG.

The plate's reverse side can print advanced material such as Nylon, Carbon Fiber, PC.

QIDI Print Slicer:

Latest slicer software version 5.0: Redesigned UI interface of QIDI software is smarter and more convenient to operate. It has changed the software's slicing algorithm and improves the print quality by 30 percent and speed by 20 percent. The QIDI software is compatible with all types of QIDI printer, life-time free, an alternative to paid software.(If yours is the old version, please download the latest version on QIDI official website).

QIDI TECH One-to-one Service:

If any problems with the X-Plus 3d printer, please contact Qidi Tech team and we will reply in 12 hours.

• Stable, High Speed Operation, Silent Printing: Profile and sheet metal combined with all-metal body, hot bed platform leveling (optional 3 or 4 level);very easy to assemble; Linear guide (X.Y axis): achieves high precision, high speed operation, and silent printing.
• Smooth Printing Surface, Accurate And Uniform Extrusion, Rapid Prototyping:TMC2208 256 subdivided motor drive (X.Y axis); print surface is smoother and reduces noise. Double fan annular cooling; rapid cooling of workpiece. BMG two-wheel extruder: the discharge is more accurate and uniform.
• Break Detection and Power off Continuous Printing: Automatically detect the feeding condition, automatically pause printing after the material is cut off; power off, pause the continuous function; can resume printing from the last layer, saving time and reducing waste.
• Touch Color Screen: 3.5 Inch large size touch screen: support multi-language (Chinese, English, French and Italian) interface operation.
• What You Get: TWO TREES 3D Printer, 0.2 KG Filament (random color)TF Card includes (installation manual, accessory details, cura software package), lifetime technical support and 7*24 hours professional customer service.

Product features

CORE XY model - let yourself fall in love with 3D printing

Compared to the conventional I3 model, the Kern XY model represents a powerful revolution in the field of printing. Printing is faster and more accurate, and there is no jitter.

Twotrees Sapphire PRO 3D printer

Twotrees is a brand that is dedicated to the manufacture of high quality printers, printer accessories and CNC machines and is 20 years old.

High configuration

Double fan ring cooling, rapid cooling of the workpiece

BMG two-wheel extruder: the discharge is more precise and even.

2 pcs TMC2208 256 motor drive (X.Y axis), the printing surface is smoother and quieter.

3.5 inch touchscreen

Perfect functional design

(automatic leveling

quickly heating up

resume printing

high precision printing),

You can enjoy the world of printing.

Linear guide design for faster, quieter

We design (X.Y-axis) full linear guides to achieve high-precision, fast and noiseless printing, and not an inexpensive, low-quality construction of the optical axis and the pulley.

Restore the print function

If the power fails, prints can be resumed from the last shift after being turned on. This saves time and reduces filament consumption!

Without clogging

Our BMG extruder (dual wheel extruder) significantly reduces the risk of a blocked nozzle.

Rapid heating

A hot bed with a high watt density ensures rapid heating and reaches its operating temperature in 1 minute or less!

Large build volume

With the build area of 235 x 235 x 235 mm (9.2 x 9.2 x 9.2 inches) you can create large and complex models.

• Fast Printing and Longer Lifespan: Creality LD002H lcd resin 3d printer uses a 6 inch monochrome LCD of 2K HD 2560x1620 resolution, only taking 1-4s/layer exposure to cure resin, which could significantly increase your printing efficiency and save your time. Moreover, monochrome LCD has a much longer lifespan and stable performance during long-time printing.
• Ultra Accurcy Printing: Creality LD002H sla 3d printer equipped with a UV integrated light source module and upgraded transmission system, working together with 2K mono LCD, the light source can reache 8000uw/cm2, which greatly improve the printing precision and details.
• Air Filtration System with Activated Carbon: LD002H resin printer built-in air filtering system. There is a small box at the rear of the print chamber containing a pouch of activated carbon, which can absorb the fume of the exposed resin and offer you a refreshing printing experience.
• CHITUBOX Slicing Software: This resin 3d printer installs the latest version of CHITU BOX Slicing Software, which supports one-key to add the model support and adjust the modeling size, easy to achieve all functions you want.
• Easy to Operate and Level the Print Platform: LD002H lcd 3d printer adpots user-friendly 3.5 inch full-color touch screen UI design interface can monitor real-time printing information, easy to operate. Lower the print platform and keeping only a distance of a piece of paper, then lock the leveling nut to finish the leveling, saving much time than before.

User questions & answers

Question:	Where can I get a replacement screen
Answer:	If your printer has any issue, please contact with the seller. They can help you to fix your printer issue.
Question:	I am looking to purchase this printer very soon and wanted to know what is the recommend type of resin for this printer
Answer:	I have used only water washable resin for my own ease of not having to buy IPA. I believe any 3d resin will work, just depends on the purpose of the use.
Question:	In creality site they list the ld-002h as "2k monochrome lcd screen", is this the same version? cause i can't find any reference to mono screen here
Answer:	LD002H is 2k monochrome lcd screen and the resolution is 2560x1620.

Product features

Z-axis Linear Rail

Stability is the prerequisite to realize high print precision, the Z-axis linear rail ensures a high precision movement. A stable mechanical structure gives you refined results.

2K Monochrome LCD

Creality LD002H lcd resin 3d printer uses a monochrome LCD of 2K HD 2560x1620 resolution. It is four times longer in lifespan and two times faster in printing speed than the regular RGB LCD 3D printers, which means higher printing efficiency, more stable performance, and less maintenance.

High Quality and Durable

Sturdy structure of the full metal body and acrylic cover, not only beautiful, but also not easy to wear, have longer using life, which still looks like the new one even many years later.

High Precision and Resolution

Creality LD-002H 3D Printer uses a 2560x1620 2K HD masking LCD as to provide accurate printing.

• 1. [New high-definition 3.5-inch touch screen] is easy to operate and easier to use. Remote extruder --- MK8 nozzle with elaborate design, high printing accuracy and more stable printing performance. Single cable design --- Solve many lines, chaotic lines, easier to operate.
• 2. [Filament run out detection] When the consumables are almost used up, a prompt sound will be issued to maintain the use of consumables in time, which improves the printing efficiency. Automatic leveling --- one-key leveling, quick work. Save printing time.
• 3. [More functions] Two-way cooling design --- cooling fan + cooling fan, improve the cooling efficiency. Wiring motherboard box --- saves time for wiring installation, more safe and reliable. Selected high wear-resistant pulleys --- improve printing speed and service life.
• 4. [For experienced printer enthusiasts] The TRONXY X5 series 3D printer is a DIY assembly machine. Not suitable for beginners who want to print directly in a short time. Of course, if you are a DIY enthusiast or a beginner who is willing to spend a lot of time assembling and learning 3D printing, you can also choose to buy.
• 5.[After-sales service]If you encounter any problems when installing and using the 3D printer, please read the manual and contact TRONXY's professional after-sales personnel. (contact us: Your Amazon Buyer Account> Click Your Account> Your Orders> Find your order and click Contact Seller)It has a one-year warranty.Our TRONXY will provide lifetime technical support and will give you a satisfactory answer. We guarantee that under normal circumstances we will reply within 24 hours.

User questions & answers

Question:	the description says 24v 360w power supply, is that the case? if it's 12v i will needs to send it back. i only work with 24v now
Answer:	Yes, the output power is 24V 360W
Question:	what size filament does this printer use
Answer:	1.75MM filament, PLA, ABS, PETG, etc. filament
Question:	Where is this manufactured
Answer:	Hello, it is made in China, and it is currently in stock in Amazon warehouse
Question:	Print model misalignment
Answer:	The voltage is unstable. When printing the misalignment, observe whether it is a high-power electrical appliance, such as an air conditioner. When some of the electrical appliances are turned off, the printing is misaligned. If there is, the printing power supply plus voltage stabilization equipment. If not, observe whether the print misalignment occurs when the nozzle reaches the same point every time the stroke is blocked. The misalignment occurs after the nozzle is locked. Generally, the X, Y, and Z axis voltages are uneven. Adjust the X, Y, and Z axis currents on the motherboard to make it pass. The triaxial current is basically uniform.

Product features

X5SA 3D Printer Product Parameter、Advantages And Considerations：

• Print Principle: FDM (Fused deposition molding)
• Machine size: 580×645×660mm (22.83×25.39×25.98 in )
• Print size: 330×330×400mm（12.99×12.99×15.75 in）
• Print color: monochrome
• Print speed: 20-100mm/s (recommended 60mm/s)
• Machine weight: 13kg （28.66 lb）

• 1、Tronxy DIY Large Format X5SA 3D Printer Advantages:
• X5SA is a 3D printer specially developed for people who like large-size printing and DIY. Users need to install and debug by themselves. In this process, they can enjoy the fun of DIY assembly. Users can innovate and modify the appearance of X5SA according to their own ideas to satisfy users' creativity.
• （2）Square structure: The design is matched with 4 polished rods and 2 screw rods, with high stability and large space utilization, suitable for enterprises and educational institutions. High-precision printing can be easily achieved.（3）Double Z-axis design: increase the bearing capacity of the hot bed, reduce errors in printing, and print more finely.（4）360W high-quality power supply: The power supply system is stable, which further improves the stability of printing and is safer. Users can use it with confidence
• 2、Be careful before buying:
• ----Before performing automatic leveling, please make sure that the position of the adjustable sensor is not lower than the nozzle position. After some automatic leveling operations, please make sure that the difference between the data is less than 0.05mm. Don't forget to set the ZOFFSET distance. The purpose of -TRONXY 3D printer is to provide our customers with a good user experience. All 3D printers undergo strict printing tests before they leave the factory, so if there are filaments remaining in the nozzles, this is normal. Do not worry. -If it is found that the print head assembly and the print platform are shaking, they are normal after transportation. Tighten the eccentric nut, this is not a quality problem. -Don't miss the orange card reader and SD card, machine assembly manual, printing test file and slicing software included in the SD card. The attached SD card provides an electronic version of the operating instructions and a link to the installation video. After receiving the package, please check the integrity of the parts first. If any parts are missing or damaged, please contact the after-sales service email as soon as possible. If you find that the actual printing time is longer than the estimated time of the slicing software, please don't worry. This is not a quality issue. Please contact our after-sales service to update the firmware parameters. This problem is easy to solve

• 【High Precision】: With this printer resin, printed parts will have high detail with no deformation or noticeable shrinkage and the final cured pieces are strong without being brittle
• 【Quick Curing】: The UV resins can be rapid prototyping, developed to reduce the forming time.
• 【Rigid & Toughness】: This LCD resin Have good combination of hardness and toughness, which brings easy removal of the model and fine printing details.
• 【Excellent Fluidity】: Able to quickly infiltrate models and cure them into shapes, and tend to be making clean up and post-processing finished pieces much easier.
• 【Well Packed】: The SLA resin bottle comes packaged safely in bubble wrap and cap are completely intact, surrounded by a tight-fitting air pillow. No worries for leakage.

User questions & answers

Question:	where do I buy the castable one? I can not find it in amazon
Answer:	Up
Question:	Confused: are two bottles of 500 g sent for a total of 1 kg? Or is one 500 g bottle sent
Answer:	yes
Question:	Can I use another kind of resin with the printer, or only the resin that comes with the printer can be used
Answer:	Start with computer off. Plug in printer Turn on computer and settings to find the printer. Windows should install the correct printer driver. If for some reason it does not then you need to go th Samsung web site and downloand and install the driver.
Question:	Where do i find a material safety data sheet
Answer:	Mine has both - Ethernet is immediately above USB. I had a picture to send you but do not seem to be able to add it to my answer.

Product features

For LCD

Specifically designed for LCD light source to achieve better printing quality.

High Precision

Low shrinkage,dimensional stability when printing.The model has high precision and clear details.

Quick Curing

ANYCUBIC UV resins can be rapid prototyping. It has been developed to reduce the forming time.

Rigid & Toughness

Appropriate toughness.ANYCUBIC UV resins have good combination of hardness and toughness,which brings easy removal of model and fine printing details

Product description

3D Touch V3.2 is the new generation hotbed automatic leveling accessory of FDM 3D printer. Built by the latest technology, it can accurately measure the inclination of the hotbed.

It can be used for hotbeds made of glass, wood, metal, etc. Users no longer need to manually level the hotbed, bringing users a simpler and faster hot bed leveling experience, and improving the printing success rate and printing accuracy.

3D Touch V3.2 upgrade the new structural design for higher precision， can be widely used in various FDM 3D printers, it is a necessary accessory for 3D printers.



Feature：

New structural design, higher precision

High precision, accuracy deviation is 0.005mm Suitable for various materials hotbeds

Automatic detection after power on

Abnormal alarm

More stable and reliable

Intelligent measurement



Specification：

Voltage: 4.8～5.1V

Current: 15mA～300mA

Packing list:

1. 3D-touch: x1

2. M3 screw: x4

3. M3 nut: x2

4. Metal holder: x1

5. 18cm cable: x1

6. 100cm cable: x1

• 【Base On Auto Open-source】Geeetech 3D- Touch Sensor auto leveling sensor for 3D Printers based on open-source.
• 【High Precision】The deviation of accuracy is ±0.005mm,that can precisely measure the tilt of your print surface,it can greatly improve the printing precision of your 3D Printer.
• 【Simple & Smart】The main function is self - check and alarm,can be used on almost every 3D printer control board.Auto leveling function is adopted to make easier to use and high rate success.
• 【High Compatiblec】The 3D- Touch sensor can work with nearly any kind of bed materials, such as glasses, woods, metals and so on.
• 【Notice】This item requires a firmware update, for detailed instructions, please refer to the user manual. If you need any help, please feel free to contact us.

User questions & answers

Question:	Is this complete and comes with everything? i will be installing it on a creality ender 3. let me know as soon as you guys can. thanks in advance
Answer:	Yes, all connectors are included. However you need to make a mount
Question:	what one do i buy for the ender 3 pro v
Answer:	The 3d touch Touch sensor kit is the same, depends on how you intend to wire it on which extension cable is needed. Not sure? Go with the 2 type option so have both once you figure it out.
Question:	Will this work on an Ender
Answer:	Yes. depending on what direct drive you have. You might need the Burner and ISP Pinboard for setting in Ender 3
Question:	i need a 1.5 meter extension for my make select plus is this the correct size
Answer:	Just make an extension out of ribbon cable

Product description

Specifications:

Input: AC 100-265V 50-60Hz

Output: DC 24V 15A 360W

Modeling Technology: FDM(Fused Deposition Modeling)

Printing Size: 220 * 220 * 250mm

Printing Accuracy：±0.1mm

Max. Traveling Speed: 180mm/s

Filament: 1.75mm PLA, ABS, TPU, etc.

Layer Thickness: 0.1-0.4mm

Nozzle Diameter: 0.4mm

File Format: STL, OBJ, G-Code

Working Mode: Online or SD offline

Max. Nozzle Temperature: 255℃

Max. Hotbed Temperature: 110℃

Machine Size: 44 * 41 * 46.5cm / 17.3 * 16.1 * 18.3in

Package Size:  51 * 40 * 19cm / 20.1 * 15.7 * 7.5in

Package Weight: 8kg / 17.6lbs



Package List:

1 * 3D Printer Set(with 5m white PLA filament)

• High-precision 3D printer with ±0.1mm high printing accuracy, 220 * 220 * 250mm large printing size with one-piece structure, saving space but building the world.
• MK-8 extruder greatly reduces plugging risk and bad extrustion; and the hotbed can reach 110℃ in about 5 minutes to meet the needs of fast heating and printing.
• CNC machining of Y-rail mounting groove to make sure precise positioning and keep the stable frame with high-precision printing quality.
• Adopts V-Socket linear bearing system and wheel moving parts, super noiseless and smooth printing performance; big hand twist nut make the print platform easier to level.
• Safely protected power supply and resume printing function, if the machine is shut down or power failure accidentally, it can continue printing after power on.

User questions & answers

Question:	What about the priting size
Answer:	It's a 'LED Printer' that still uses powdered toner. You can purchase dye sublimation inks for certain Epson & Ricoh (only) desk top INK JET printers to do sublimation printing.
Question:	Is it easy to assemble? How long it takes you to assemble
Answer:	The main reason as to why I chose this printer is to print on transfer paper for t-shirts. I have not done it yet, but it does have that capability. You have to have the right transfer paper though, just be aware of that.
Question:	Does it require sodering
Answer:	I have seen videos of people subbing out the color cartridge for white in order to add a white base to transfers.
Question:	Do I need to purchase additional software to print my own designs
Answer:	NO

• Upgraded version: full metal backplane: safe and stable, improve printing accuracy; high-precision slider: greatly improve printing accuracy and work efficiency. Extruder: no clogging, high-speed printing; double linear guide: reduce friction and improve printing accuracy.
• Breakpoint detection: When the wire is broken, the out-point material-breaking detection module will start, and then stop printing and alarm to avoid waste of time and resources caused by material-breaking.
• Resume printing after power failure: The model will not be printed when the machine is powered off. The resuming printing function solves this problem 100%. After the power failure, the operation interface can continue to print and complete the beloved model.
• Touch color screen: 3.5-inch large-size touch screen: supports multi-language (Chinese, English, French and Italian) interface operation.
• What you get is: A 3D printer, 0.2 KG filament (random color) TF card included (installation manual, accessories details, cura software package)

Product description

Technical specifications:



layer resolution: 0.1mm



frame: aluminum profile XYZ



positioning accuracy: 0.05mm, 0.05mm, 0.1mm



printing filament: PLA, ABS, TPU, flexible material



filament diameter: 1.75mm



nozzle diameter: 0.4mm



machine size : 430 x 390 x 590 mm (with spool support), 16.9 x 15.35 x 23.2 inches (with spool support)



Shipping box dimensions: 540 x 440 x 320 mm, 21.25 x 17.32 x 12.59 inches



Machine weight: 8.9 kg



Shipping weight: 10.5 kg



Maximum print speed: 150 mm/s



Maximum travel speed: 250mm/s Build volume: 220 x 220 x 250 mm, 8.66 x 8.66 x 9.84 in



Extruder type: Titan extruder (direct drive)



Maximum base plate temperature: 130C



Power requirements: 110V



Connectivity: USB, TF card, USB memory stick



Control board: MKS Gen L



Nozzle type: Volcano



Features: Exclusive ultra-quiet stepper drive synchronous dual Z system directly Drive extruder, filament runout detection and recovery power loss detection and recovery rapid heating AC hot bed touch screen control

The packaging includes:



1 x Artillery Genius 3D printer



1 x Assembly tool kit



1 X Assembly Instructions



1 X Assembly Guide

• ·Easy to install and stable performance 98% pre-assembled, all aluminum frame design printed, brush is very stable: 3 inductive sensor terminal stops are set on the XYZ axis, and those non-contact high-precision limit switches can be automatically calibrated and Maintain good stability under high-speed printing.
• The printer has a direct drive extruder and a fast heating AC electric heating bed with a built-in thermal runaway protection device. Even if the circuit board or SSR fails, the bed will not heat endlessly until bad things happen. The heated bed can be heated to 80°C in 2 minutes, and it can be heated to 110°C in about 5 minutes using only a 0.4 mm nozzle. The smooth bedside surface of the latticed glass allows all types of filaments to be easily pasted.
• ·Fault detection-filament exhaustion detection and recovery. Resume printing after power failure, goodbye print job interrupted due to power failure
• Powerful high-quality accessories-with color touch screen control. Ultra-quiet stepper driver. High-precision inductive sensor end stop can achieve more accurate positioning. Directly drive the extruder to support flexible materials.
• Fast and accurate: The printing speed can reach 150 mm/s. .Genius can print with high quality, especially for flexible filament

User questions & answers

Question:	Buenas noches, cuál es el tamaño de la cama
Answer:	https://3dprinterwiki.info/wp-content/uploads/2017/01/Resin-MSDS-Report.pdf

Product description

Eco-friendly 3D Pen PLA Filament Refills is Great Drawing Tool for Your 3D Pen!



-Eco-friendly and high-quality material, no paint, non-toxic, no pollution. Safe for kids.

-Our3D silicone mat heat resistant up to 270℃ with high quality silicone. Also can protect your desk from being burned when using 3d pen.

-Interesting patterns to make your 3D printed work better.

-Foldable and easy to store. Washable and easy to clean.

-Extra gift: 2 silicone finger caps protect your finger from hot 3D pen nozzle/filament.

-It is suitable for everyone, from children to adults, from 3D stroke beginners to 3D stroke experts!



Most Popular Beautiful 20 Colors Included



Included 20 Different Beautiful Colors, To Satisfy Your Diverse Colors Demand Very Well

20 Colors List:

Fluorescent Pink, Purple, Dark Grey, Yellow, Flesh Tone, Wood Color, Light Grey, Light Purple, Sky Blue, Dark Blue, Brown, Fluorescent Green, Dark Green, Light Orange, Pink, Orange, Red, Light Pink, White, Black.



Why Is PLA Material Better Than ABS?



- PLA is a Nontoxic Material Choice (compared to ABS, which is not);

- PLA is odorless and won't expel stinky smoke when burnt like ABS does

- PLA is Safe for the Environment and Safe for Kids (unlike ABS)

- PLA burns at a lower temperature than ABS (180 degrees to 220 degrees)

- PLA is stronger and softer than ABS, which means better control and longevity

- PLA has a glossier finish than ABS, which means better-looking art



The Best Service For You And Your Kids



We will always be there 24/7 whenever you need us. Feel free to let us know if you have any questions or suggestions, or share with us the great moment between you and 3D drawing and 3D art.

Our team are thrilled to hear from our customers and will strive to constantly provide high quality products and excellent shopping experience.

• 💕【20 Colors 320 Feet Total And Extra Gift】 2fluorescent pigments and 18 Popular Solid Colors. Our 3d pen filament refills comes with 2 silicone finger caps to protect your finger from hot 3D pen nozzle/filament. These excellent colors is best choice for all 3D drawing and 3D art.
• 💕【High-Quality】 The 3d pen refills won't have jamming, nozzle clogging, discoloration, or bubbling. You get filament that works smoothly every time.
• 💕【Safe And Great Gift For Anyone】Non-toxic, no odor, non-irritating, Eco-Friendly and biodegradable. Suitable for everyone, from children to adults, from 3D stroke beginners to 3D stroke experts!
• 💕【Universal Compatibility】Our 3D PLA pen filament is 1.75mm in diameter, making it the most commonly used in both 3D pens and 3D printers. (Dimensional Accuracy +/- 0.05 mm). Not suitable for 3Doodler pen.
• 💕【100% Happiness Guarantee】 We will always be there 24/7 whenever you and your lovely kids need us. Feel free to buy, we are responsible for the quality of all products we sell.

User questions & answers

Question:	Can this be used for 3d printers? Or is just for 3d pens
Answer:	it don't need to purchase any sofeware
Question:	Will this filament work with all brands of 3d pens
Answer:	This is on Amazon: search for castable resin IFUN Jewelry Casting Resin for LCD 3D Printer Lost Wax Casting UV-Curing Resin 405nm Photosensitive Liquid Yellow 500ml
Question:	Does the 3d pla filament suitable for children
Answer:	You get the size bottle you order in the color you choose... 1 Liter or 500 ml (half a liter).
Question:	Can I use this with the 3Doodler starter pen
Answer:	Hello The ANYCUBIC resin is suitable with our Photon machine print parameter setting. If you have any questions about the machine and the resin, please contact us by the service card address and we have professional engineers to follow your help ticket within 24 hours (the holiday response will be delay and thank you kindly for your understanding). We can only guarantee the quality of prints using our resin. We are responsible for the ANYCUBIC resin problem, If you are having trouble with the third party resin we can only recommend using our resin or contacting the manufacturer of the 3rd party resin for details.