13 best glass plate for 3d printer

Product description

Welcome to DCSW 3D printer store,Hope you have a great shopping experience!Any questions,feel free to contact we customer service,we will help you within 24 hrs!



Glass Print bed Advantages:

Glass Print bed is a universal print surface for 3D Printing. Almost all types of filament will print toglass in one way or another. Just place the Glass Print bed on your print board and clip it in place!To print with PLA or ABS , lightly spray the surface of the glass with 3d printing special solid glue,then install the Glass Print bed with glass clip. This glass has been specially ordered and modified for use in 3D Printers.



If you want to make your printing platform flat enough, ideal stuff is glass sheet. Borosilicate glass is rated for higher temperatures than normal sheet glass making it a better material for use as a heated bed. After cracking a few sheets of normal glass from rapidly cooling or heating, borosilicate glass will quell your frustrations.



Features:

1.Resistant to thermal shock compared to regular glass.

2.Prepare a second plate and quickly switchplates when a model finishes printing. This significantly reduces printer idle time between prints.

3.Reduces warping, however platform has to be properly leveled as is the case with any platform on a 3D printer.



Note:

1.The glass can be used normally at 520 degree temperature.

2.You need to adjust the Z axis limit switch up and down when installing.

3.Apply some 3d printing solid glue on the glass surface on before printing.

4. The Glass Print Bed's thickness of 4.0mm is within the normal range.

• 【Borosilicate Glass】Based on 100,000 experiment report,this material has Ultra-low thermal expansion,heat resistant and high temperature shock resistance,far better than tempered glass.So borosilicate glass is the best choice for 3d printer.
• 【Worked Perfectly】This Printer Glass bed is amazingly flat.Smooth flat surface improves the quality of your 3D printing, for consistent results.Thick 3.8mm glass plate will not warp or bend under heat.
• 【Easy to Clean】Just wash it off with water, clean with glass print bed cleaner, reapply a thin layer 3d printing solid glue and enjoy.No need extra clips because of its own material and thickness.It won't take up build area.
• 【High Quality】 Square printer glass are safe and easy to handle.All edges have a nice smooth round over and there are no chips or scratches.Fits for the Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5 and CR-6 SE, CR-20, CR-20 Pro，DISWAY01.
• 【18 Months Warranty】100% Dcreate Genuine Brand New - Original packaging, premium quality. 100% hassle-free replacement guarantee within 18 months warranty and replacement for quality issue.

User questions & answers

Question:	will you clean this glass bed before work
Answer:	I periodically wipe the bed down with a wet then dry cloth when the glass feels rough. If the glass bed feels smooth I think it should be fine. I always spray the glass with cheap hairspray and heat the bed before printing to help the pla stick. I love the glass bed for easy release after it cools completely.
Question:	Will glass Print Bed fit the ender
Answer:	Yes, the glass print bed is good for the Ender 3.
Question:	Does it stick well
Answer:	I have no issues with sticking but I also use Aqua Net hair spray. I spray the glass and let it heat up to 60-62 degrees and than I print till items not longer stick. So far I have been able to print 18-24 times between reposting the hair spray.
Question:	Will the glass print bed work with the cr-10 style bed clips
Answer:	No, for the glass print bed is suitable for the Ender 3 3d printer.

• Excellent adhension.Our state of the art carbon and silicone build surface provides the best adhesion in the market. It has a nice texture on surface that helps with bed adhesion. As the hotbed heats to higher temperatures, it provides even more adhesion. Perfect for those prints with difficult warping issues.Will need some glue when printing ABS.
• Very easy to take off the models.When the print platform cools down, you can grab a complete small model without borrowing any tools. Large models can be easily removed using tools such as a blade.No more scrathch or stab yourself with a scraper again.
• Completely flat. A lot of Ender 3 owners complain about warped beds. This heated bed platform solves that problem once and for all.It's a nice upgrade to the original aluminum base of the print surface.It level things out if there is any minor warping going on there.
• Very durable.The special coating is inorganic and has a hardness of 8 Mohs, and it is capable to work at 400ºC. Creality 235*235cm glass bed is perfect for Ender 3 / Ender 3 Pro / Ender 5/ Ender 5 Pro
• Upgrate design. After scan many negtive review of the old version.We have update our design.We print small logo in the bottom instead of the big CREALITY logo in the middle to avoid the printes be impinted with the CREALITY logo. After design update,the prints will have a smoother finished on the finished part.

User questions & answers

Question:	Can i use this to fix my warped bed
Answer:	Yes, you can use this. Just attract him to your existing bed with a clip at the back and a clip at the front
Question:	Is this glass bed easy to remove the model
Answer:	Yes, Once it starts to cool, the prints literally just drop off
Question:	will filament stick to this glass bed
Answer:	Adhesion is fantastic. The filament will sticks well to the bed
Question:	PLA residual remains after print is removed. What is the best way to clean it off
Answer:	I have been using IPA between prints and so far no problems with the adhesion

Product features

New Creality Ender 3 Glass Bed

All of the glass plate are tested by producer and brand owner Creality to ensure product performance and safety.

Why Choose Tresbro?

We are the officially authorized seller by Creality, and providing great products and service to customers is our brand's highest purpose.

An Ideal Platform Heated Bed for 3D Printing

For higher requirement for print accuracy, it is recommended to use the glass plate with extremely high flatness instead of magnetic mat or pei sheet.

Stronger Adhesion

New Creality 3D printer glass bed provides stronger adhesion, molds will stick on bed firmly without glue, avoiding the issue of print edges curling.

Excellent Flatness

Upgraded Ender 3 glass plate with smaller CREALITY logo provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model during 3D printing.

Super Convenient

It is easy to take off the model without tools from the 3D printer tempered glass plate; it could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature.

High Grade Material

Borosilicate glass in 4mm thick, stronger and more durable than 3mm thick ones. Hardness of 8 Mohs, heat resistance up to 400 ℃.

Product description

If you want to make your printing platform flat enough, ideal stuff is glass sheet. Borosilicate glass is rated for higher temperatures than normal sheet glass making it a better material for use as a heated bed. After cracking a few sheets of normal glass from rapidly cooling or heating, borosilicate glass will quell your frustrations.

NOTE：

NOT fit for Ender 3 because 220*220mm is the bulid size of Ender 3, the actual headbed size of Ender 3 is 235*235mm.

Features:

* Borosilicate is a very high temperature glass. It has a melt temperature of about 800° C and a very low thermal expansion coefficient.

* Resistant to thermal shock compared to regular glass.

* Prepare a second plate and quickly switchplates when a model finishes printing. This significantly reduces printer idle time between prints.

* Reduces warping, however platform has to be properly leveled as is the case with any platform on a 3D printer.

Specification:

Material: 100% Borosilicate

Size: 220x220x3mm

Thickness: 3mm

Package content:

1 x 220x220x3mm Borosilicate Glass

• 100% borosilicate glass. Borasolicate glass is rated for higher temperatures than normal sheet glass. Flat, heat resistant plate. Does not warp during long term use...
• Conducts heat evenly across the build surface to ensure consistent temperature throughout the build surface.
• High binding power when heating. Easy to separate the plastic parts when cooling.
• Get you out of the trouble when plastic film decreased viscosity after a period of usage.
• Specially designed to fit the 3D Printers MK2/MK2A, Anet A8, Anet A6, Ultimaker 2+, Reprap, Mendel. NOTE: NOT fit for Ender 3 because 220*220mm is the bulid size of Ender 3, the actual headbed size of Ender 3 is 235*235mm.

User questions & answers

Question:	Will this fit an Ender
Answer:	No
Question:	does this have the corners cut for the leveling screws
Answer:	You can use the traditional brass 0.4 nozzles, but any filaments with infused particles will wear the nozzle down over time. Hardened steel will not really wear down so it's commonly suggested, but not mandatory. There are cheap (10-12$) nozzle packs that have both 0.4 hardened steal and 0.6 brass nozzles that are both better alternatives to prevent wear down and clogging.
Question:	Will the glass heat up
Answer:	It does not glow on its own. It has to be "charged" by sitting under UV light (best results) or any other light source for a period of time.
Question:	For people with an Anet a8 like me, does this glass bed leave room for the screws
Answer:	Dear customer, Thank you for your question. The glow filament is PLA, not TPU. If you want TPU filament, please check the link below: https://www.amazon.com/dp/B074RGKBT4 We have yellow, red and white available on Amazon now. Have a nice day. Sincerely, Amolen tech

• Upgraded Version: It comes with extra glass plate, Cmagnet build surface, and also MeanWell power supply. The Ender 3 Pro boasts the same outstanding performance as the Ender 3, upgraded components make this 3D printer more stable, durable and easier to operate.
• MeanWell Power Supply: Equipped with UL certified MeanWell power supply, which is produced by the listed company with mature technology, and it meets all the needs of fast heating and long-time 3D printing.
• Cmagnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
• Resume Printing Function: Shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
• What You Get: Ceality Ender 3 Pro 3D pinrter, Glass plate, lifetime technical assistance and 24 hours professional customer service.

User questions & answers

Question:	I am receiving a slicing error that the print is too large. The model is 115mmx115mmx85mm, it should fit build volume. What's wrong with the slicer
Answer:	Try a different program- like Cura or Sli3er They are pretty easy to use, even for an old dog like me.
Question:	Is the whole thing UL certified or just the Power supply
Answer:	My understanding is the power supply is UL listed, and it provides power to the cpu, x,Y,z motors and the feeder and extruder, I've had no issues with mine since purchase 10 months ago
Question:	Would I be able to print masks to donate to hospitals with this printer
Answer:	You can print the masks with this printer if you have the slicer model.
Question:	Can I 3d print a screw with this printer which is 3 inch long and size
Answer:	You would probably be better off printing a straight piece the size of the total screw and then tapping it...

Product features

Why choose Creality 3D Ender 3 Pro 3D Printer?

1. Fully Open Source: Allow users to improve their printer upon the source code and share the changes within the community, resulting in an improved experience for all.

2. Ideal Gift for Kids: This semi-assembled kit 3D printer is a perfect gift for kid, allow them to learn about the basic construction of 3D printers.

3. Ideal for STEM Projects: Invite imagination and innovation to student, help them discover the wonders of all the STEM fields.

Resume Printing Function

Ender 3 Pro can resume printing after power outage or any other unexpected stoppage.

Meanwell Power Supply

Branded power supply and high-watt hot bed ensure fast heating to the printing platform.

Upgraded Extruder Design

Greatly reduces the risk of clogged nozzle and bad extrusion.

Product description

Creality Ender-5 Pro is an upgrade of Ender-5 3D printer.

We know that the Pro version not only gets the Upgraded Mainboard,

But Also upgraded Metal Extruder Frame, improved frame assembly and improved Dual Y- Axis.

This time, we tried to add a glass bed which makes models are easier removed

This printer is packed with features out of the box with a powerful heated bed to reach  110 Deg C in under 5 minutes,

 resume after power outage, magnetic printing surface

The printer is shipped in its flat state and requires basic assembly. Easy to understand  instructions are provided.

Package content

1 x Creality ender 5 Pro 3D Printer

1x  Glass Bed

• Added a glass bed Plate，which makes models are easier removed.
• Upgraded Motherboard for quieter operation and higher precision
• New cubic structure for sturdier prints；Easy assembly and sturdy build quality
• Improved bowden tube material from Capricorn
• Metal Extruder for better filament feeding and wear resistance

User questions & answers

Question:	So which creality ender 5 pro is the best one to buy? there are 5 creality ender 5 pros all for $399. which one has upgraded firmware and motherboard
Answer:	The 10v2 comes virtually assembled out of the box (about 6 screws). Both of mine have just worked from day 1 after the initial bed level. Of course, if you want to fully assemble a machine from scratch, making sure that all parts are square and perfect, and hassle with tensioning belts, squaring Z-axis gantries, and calibrating eSteps, feel free :)

• BLTouch Auto Bed Leveling Sensor: It can precisely measure the tilt of hot bed surface and offers Z axis leveling compensation. Saving your time and reducing waste.
• Equipped with Two Lead Screws on Z Axis: The hot bed was held stably on Z axis frames, no worry about bed wobbling and dropping, fewer points of failure and fewer headaches.
• Dual Y Axis Motors: Y axis dual shaft motor and down-shift Z axis, moving more smoothly, ensure high precision printing.
• Easy to Assemble and Operate: Ender 5 Plus uses touch color screen for easy and quick operation. It comes with several partially assembled kits, very easy to assemble and allow you to learn about the basic construction of 3D printer.
• Extra Glass Plate: Add a tempered glass plate on the heated bed, which makes models are easier to be removed. It also makes the hot bed more flat and provide all-around protection.

User questions & answers

Question:	Is the power supply really "brand", and how safe is it
Answer:	My understanding is that the difference between and Ender 5 and an Ender 5 Pro is the upgraded software and motherboard and bowin tube, etc
Question:	Do i have to use a specific brand of filament? i had a xyz davinci mini that used nfc
Answer:	This is the CR-10 V2, but the same applies for the CR-10- yes, you can add a BL Touch accessory to it, and the kits work. It's much easier to add to a V2 than the original, since you can wire it into the extruder board rather than the main board. You can get a kit for like 65 USD. You should, however, be aware of how this type of autolevelling technology works. It measures the distance between the probe and the bed plate at various points then uses that data to compute a model of what it thinks the bed looks like, then as the print head is moving it adjusts the z coordinate to account for the fact that the bed is NOT level. So, the bed needs to be MOSTLY level anyway if you want good results, and you'll also need to deal with the probe Z offset - the distance that the probe is from the nozzle. If that number is slightly off you won't get good prints, and if you try a live level the next time your printer homes the issues will come back, making you adjust your printer again each time until you reach the constraints of your bed! It works pretty well though, so you can give it a go, I certainly use it myself. Just be aware that that it won't make all of your headaches disappear, and it does make your system slightly more complex.
Question:	Is this the newest version with the upgraded lead screws and all
Answer:	Cura! Please download the Cura which suit to Mac system.
Question:	Can I use snap makers slicer? Since cura can cause prints to have “Zits” according to all3dp.com
Answer:	no wifi, This printer could printing use USB connect to a computer directly, also could use micro sd cards.

Product features

Machine Parameters

Modeling Technology: FDM

Print Size: 350*350*400mm

HD Screen Size: 4.3 inch

Nozzle Diameter: Standard 0.4mm

Input: AC 110V/220V 50-60Hz Output: DC 24V 21A, Max25A

Filament Diameter: 1.75mm Net Weight: 18.2KG

Machine Size: 632*666*619mm

Working Modes: Online or Micro SD offline

File Format: STL, OBJ, AMF, G-Code

BL Touch Auto Leveling Sensor

Pre-installed BLTouch, precisely measure the tilt of the bed surface, offers the automatic compensation for Z-axis for unevenness of the platform plate, and provid reliable operation with all build surfaces.

Filament Detection

Better lets you know whenever your filament breaks, runs out, or gets tangled on the spool.

Y Axis Dual Shaft Motor

Meet more of your printing requirements, achieve better print results and a laarger print model at a time.Y Axis Dual Shaft Motor.

High Power Supply Unit

Brand power supply unit, safe and secure. Brand power support to heat the hotbed up to 100℃ within 10 minutes.

Runaway Protection

Simple and Safe. It is protection agaist the temperature getting out of control.

4.3 Inch Touch Screen

Touch color screen, you will have easy and quick operation.

• REMOVABLE BUILD SURFACE PLATE: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
• SAFE POWER SUPPLY: Ender 3 Pro comes with a UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.
• RESUME PRINT FUNCTION: Ender 3 Pro can resume printing from the last recorded extruder position after suffering unexpected power outages.
• SEMI-ASSEMBLED KIT: This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. A fun STEM educational experience in mechanical engineering and electronics.
• WHAT YOU GET: Ceality Ender 3 Pro 3D pinrter, lifetime technical assistance and 24 hours professional customer service.

User questions & answers

Question:	What version is the board
Answer:	The newest version of the board is 1.1.5, it does not come with the printer though. Mine came with 1.1.4 which is very similar to the 1.1.3. Creality Sells the 1.1.5 separately right now as the Creality v1.1.5 Silent Main Board. It is $50 bucks and you might find it cheaper but it is a worthwhile upgrade. It has newer stepper drivers that make the stepper motors virtually silent. I can't hear them anymore only the fans now. The board also has thermal runaway enabled and has a boot loader preinstalled so if you wanted to switch to Vanilla Marlin or the TH3D software you could do so very easily. Installing this board and the TH3D software also made adding a BL Touch kit easy.
Question:	Will this printer print abs and petg also
Answer:	From the list of questions and answers on the product page, "Will this printer print abs and petg also? Answer: Yes, but for abs recommend getting a glass bed and an enclosure of some sort. By Cameron Moss on December 25, 2018
Question:	What is the physical footprint of this unit
Answer:	The actual base footprint itself requires a flat 12" x 12" surface, however certain parts such as the display panel overhang requiring a bit more space. A roughly 16" wide by about 20" deep space should be about right, although you will want to make sure both the back and front have an additional few inches to spare as the bed does move back and forth during operation. I mount mine on top of a 16" x 18" patio paver block for support and stability. I place the paver block over some dense foam that is cut about 1" in from the block edge (14" x 16"). This gives the printer a platform that helps contribute mass to absorb vibrations as well as offer a bid of noise reduction cause by sound transmission through the base. Placed a few inches from the back wall it also ensures the printer travel area remains clear. There is also YouTube video on using this technique if interested (not mine but I came across it after I came up with the same idea separately).
Question:	Does it come with any needed software? If so - what kind
Answer:	It does come with a very old version of Cura. The lastest version of Cura is what I am using. Just download it from https://ultimaker.com/en/products/ultimaker-cura-software/list. If all you are doing is downloading models and printing this is all you need. If you want to make your own 3D models that complicates things. There are many, many 3d modeling programs and which one to use is a very personal choice and each takes time to learn to use. Blender is free, Sketch-up is also I think. But there are commercial programs that can cost up to a couple of thousand to use. Zbrush, Studio Max, and others. This is list of most of them: https://all3dp.com/1/best-free-3d-modeling-software-3d-cad-3d-design-software/ Without a better idea what you are wanting to do, this is the best answer in a short space I can give.

Product features

Why choose Creality 3D Ender 3 Pro 3D Printer?

1. Fully Open Source: Allow users to improve their printer upon the source code and share the changes within the community, resulting in an improved experience for all.

2. Ideal Gift for Kids: This semi-assembled kit 3D printer is a perfect gift for kid, allow them to learn about the basic construction of 3D printers.

3. Ideal for STEM Projects: Invite imagination and innovation to student, help them discover the wonders of all the STEM fields.

Resume Printing Function

Ender 3 Pro can resume printing after power outage or any other unexpected stoppage.

Meanwell Power Supply

Branded power supply and high-watt hot bed ensure fast heating to the printing platform.

Upgraded Extruder Design

Greatly reduces the risk of clogged nozzle and bad extrusion.

Product description

Temperature settings for different filaments:



1. PLA:50-70ºC



2. Flexible filament: 50-70ºC



3. ABS:100-125ºC ( 110ºCis recommended )



4. PC:100-130ºC ( 120ºC is recommended )



5. Nelon:90-120ºC ( 110ºC is recommended )



6. PP:100-130ºC ( 120 ºC is recommended )



7. PETG: 50-70ºC





Package include: 1*Tempered Glass Plate





Cleaning note:



1. Please don't clean the glass with any chemical liquid as the coating will be scratched, nor scratch the surface with the sharp.



2. It is best to use a blade. If it can't be shovel, don't shovel it, because it will not affect the printing. The glass plate will have a loss of life. Just use the solid glue when the adhesion is insufficient if the coating is damaged and scratched.





Note:We recently update our logo from Creality 3D to CREALITY, You may get the logo Creality 3D or CREALITY, both are same quality

• Very easy to take off the models, NO tools to remove models
• Use clips to fix the glass plate on the hot bed.
• Higher temperature higher sticky. The models will stick on bed firmly when temperature is high
• Fit for Ender 3 and Ender 3X 3D printer.
• If you have any question or problem,please feel free to contact us

User questions & answers

Question:	Nothing sticks to it, even with the hairspray
Answer:	Please kindly note that the build size of Ender 3 is 220x220mm but the actual hotbed size of it should be 230*230mm. This glass would fit if you just want to make it fit with build size of 220x220mm
Question:	What is a good way to clean the surface? i have some residue on mine and i'm printing with pla. i'm fairly new to 3d printing. advice is welcome
Answer:	No.
Question:	How thick is the glass
Answer:	Yes the glass gets hot
Question:	I was not able to get the bed low enough to fit this glass. I tightened all the bed leveling screws under the bed to max. How can I get this to fit
Answer:	I don't have an Anet a8, I have a Prusa i3 (P3 Steel) with the common bed layout/size, 220mm MK3 Heatbed. This piece of glass was the exact size of my aluminum bed so I cut a little from the glass so it would sit between the screw heads, then used my bench top belt sander to ease the cut edge and corners. I found it easy to cut this glass, but I have cut glass before.

Product description

Description:



This cr-10s bed is 100% borosilicate glass. It is a flat, heat resistant plate and does not warp during long term use. 4mm thick - will not break when you remove your print from it. This cr-10 upgraded borosilicate glass plate is 310x 310mm - a perfect fit for the Creality CR-10/CR-10S heated bed. Borosilicate glass material has excellent thermal and chemical properties compared to soda lime glass. It is resistant to cracking as a result of direct high heat, making it an excellent choice for 3D printer beds. Placed on top of your build plate, it can be held in place with binder clips or thermal pads.



Temperature settings for different filaments:



1. PLA:50-70ºC

2. Flexible filament: 50-70ºC

3. ABS:100-125ºC ( 110ºCis recommended )

4. PC:100-130ºC ( 120ºC is recommended )

5. Nylon:90-120ºC ( 110ºC is recommended )

6. PP:100-130ºC ( 120 ºC is recommended )

7. PETG: 50-70ºC



Package list:



1 x CR-10S Glass Print Surface



Kindly NOTE:



This surface is incredibly sticky at high temperatures for plastics such as PETG, PLA, and ABS. Once the printing is finished, DO NOT remove the model immediately from the glass bed with force!! This glass bed must come down to room temperature for the advanced surface to "release" the model. Attempting to forcibly remove the print from the glass bed at high temperature WILL DAMAGE the proprietary surface.

• ✅Do not rub with organic solvents when cleaning, such as alcohol, acetone, etc., wipe with water; do not scratch or scratch the surface with sharp objects or sandpaper, they will destroy the surface coating. You can take it off slowly with a spatula.
• ✅ EASY REMOVAL OF PRINTS - Reduce adhesion after cooling. It is easy to separate the model and the platform and remove the model. The special coating is inorganic and has a hardness of 8 Mohs. Scratch proof and dust proof.
• ✅Experience Pro-hesion- Our state of the art carbon and silicone build surface provides the best adhesion in the market. Once the hotbed cools back to room temperature, the carbon-silicone base will release the model which can be easily removed by hand.
• ✅This cr-10s bed plate can be placed on top of any existing hotbed surface and be held in place with simple clips. Tempered Glass provides ultra flat and smooth surface for a flawless printing.
• ✅CHPOWER is a TRUSTED VENDOR. Buy with confidence.

User questions & answers

Question:	Does this bed work with the standard sensor that comes with the printer
Answer:	I use rubbing alcohol then warm bed up and spray aqua net max hold hair spray. The hair spray helps with adhesion while printing. Also if you haven’t upgraded the bed to the ended glass bed I highly recommend doing so. I did and am so glad I did. Hope this helps.
Question:	Like other reviews the bed works great in the beginning but them prints stop adhering half way thru the print. Any ideas why
Answer:	My Calipers show it as 3.9mm or .1535 inches
Question:	does this bed work with wood filament and if so what temp
Answer:	I just installed the glass on top of the regular bed which added about 0.25 in to the thickness of the bed. So now you have to raise the Z-axis motor just by undoing the attachment bolts, raising it by roughly the thickness of the glass and then tightening it up again. Now just fine adjust the bed in the normal way.

Product description

About Creality Upgraded 3D Printer Glass Bed

1. Size: 9.25x9.25x0.16inch/235x235x4mm

2. Compatibility: For Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3S, Ender 3X, Ender 5, CR 20, CR 20 Pro. Pls confirm if this tempered glass bed is compatible with your printer.

3. Material: Borosilicate Glass+Composite Coating

4. Package include: 1 x glass bed; 4 x clips

NOTE

1. The glass plate is thicker than the magnetic build surface, please adjust your Z limit switch up to account for the new bed height before any print operating to avoid extruder nozzle scraping the glass bed.

2. Please remove the plastic film from the glass bed before use.

3. Clean with alcohol or acetone when the glass build plate cools down to room temperature, gently rub the surface, do not shovel or scrape.

4. As the print has finished, don't try to remove the print from the glass bed with force immediately. This glass bed must come down to room temperature for the coating surface to "release" the print. Forcibly removing the print from the glass bed at high temperature will damage the proprietary surface.

• Compatibility: Our glass bed is applicable for Creality 3D printer Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3S, Ender 3X, Ender-5, CR-20, CR-20 Pro and most of the Cartesian style 3D printer with a MK2 MK3 hot bed. Please confirm the size of your printer's platform firstly.
• No Edge Curling: The composite coating of our tempered glass bed has super strong adhesion after heating, prints can be sticked on the build surface firmly without glue, avoiding the issue of prints edges curling. Equipped with 4 clips to fix the hot bed.
• Super Convenient: It is very easy to remove the prints. The surface of our tempered glass bed is a layer of microporous composite coating. It will contract as the hot bed cooling which greatly ensures the prints can be removed manually without any tools.
• Excellent Flatness: Upgraded ender 3 build plate with smaller CREALITY logo provides flatter and smoother build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of mold during 3D printing.
• High Grade Material: Made of 100% Genuine Borosilicate Glass, thick and high quality. Glass bed's hardness is up to 8 Mohs and is capable to work up to 400 ℃. Using alcohol or acetone to wipe it after repeated use.

User questions & answers

Question:	will the textured surface wear down the tip of the BT touch (for anyone who has both
Answer:	Yes, it can work with the standard sensor, just buy it with confidence and contact us if you have any questions.
Question:	This glass plate is thicker than the stock one of my ender 3. Is there any difference to use it
Answer:	Dear, This bed is glass and it is very convenient to use and can work great all the way. But it is very important to use properly. This surface is incredibly sticky at high temperatures for plastics such as PETG, PLA, and ABS. Once the printing is finished, DO NOT remove the model immediately from the glass bed with force!! This glass bed must come down to room temperature for the advanced surface to "release" the model. Attempting to forcibly remove the print from the glass bed at high temperature WILL DAMAGE the proprietary surface.
Question:	I notice this glass bed has a coating surface. How to clean it
Answer:	65C worked best for me. See my review though. This bed needs hair spray or similar no matter what you do.
Question:	Why do the new plates have a matte coating? compared to a glossy old one that was on my Ender 3 V
Answer:	I have no problems with stuff sticking to it. Make sure its level and heat it. I've actually lately had a problem with stuff sticking too well.

Product description

Tested, Trusted And Backed By Our Top-Rated Warranty And Customer Service!



Made From The Highest Quality, Perfectly Flat Glass: We use only the highest quality tempered glass - completely flat, smooth and just the right size (235mm x 235 x 4) - no scratches, dips or pits. Tempered glass is more durable and heat resistant than standard borosilicate glass, meaning fewer issues and less frequent replacement



Perfectly Compatible: Our 3D printer bed plates / platforms are compatible with the Creality Ender-3, Ender-3 Pro, Ender-3X, Ender-5, CR-20, CR-20 Pro, Geeetech A10, and any other 3D printers requiring a 235x235 mm print bed



8 Clips Included, Packaged To Last The Trip: No more ugly black binder clips holding your print bed. Not only are they poor quality, but they limit the build area. What's more, our 3d printer heatbeds are securely packed in protective, custom foam - they'll arrive in perfect condition, ready to use!



Easy To Care For: Our glass is super easy to clean - just wash it off with some water, clean it with some standard glass cleaner, alcohol or acetone, reapply some 3D printer glue (if desired) and get back to printing



Incredible Value: Even the best printer bed will have to be replaced eventually. Our 2 pack provides an incredible value and means that you'll always have a spare on hand

How to Calibrate Your New 3D Printers Glass Bed

1. Load the glass plate into the 3D printer base and attach with the silver clips provided.
2. Center both the bed and nozzle.
3. Lower the nozzle until it touches the top of the glass bed. 
4. Readjust the Z axis homing switch. 
5. Loosen the switches and reposition. 
6. Tighten up the switches when correctly aligned. 
7. Carry out a print calibration check to re-adjust the bed. 

• Made From The Highest Quality, Perfectly Flat Glass: We use only the highest quality tempered glass - completely flat, smooth and just the right size (235mm x 235 x 4) - no scratches, dips or pits. Tempered glass is more durable and heat resistant than standard borosilicate glass, meaning fewer issues and less frequent replacement
• Perfectly Compatible: Our 3D printer bed plates / platforms are compatible with the Creality Ender-3, Ender-3 Pro, Ender-3X, Ender-5, CR-20, CR-20 Pro, Geeetech A10, and any other 3D printers requiring a 235x235 mm print bed
• 8 Clips Included: No more ugly black binder clips holding your print bed. Not only are they poor quality, but they limit the build area. What's more, our 3d printer heatbeds are securely packed in protective, custom foam - they'll arrive in perfect condition, ready to use!
• Easy To Care For: Our glass is super easy to clean - just wash it off with some water, clean it with some standard glass cleaner, alcohol or acetone, reapply some 3D printer glue (if desired) and get back to printing
• Incredible Value: Even the best printer bed will have to be replaced eventually. Our 2 pack provides an incredible value and means that you'll always have a spare on hand

User questions & answers

Question:	Will this work on a Tarantula Pro
Answer:	Hello, thank you for your question, you can use rag to wipe the surface gently with a small amount of alcohol or acetone.
Question:	LOL. Is it really 40mm thick
Answer:	The matt is more of a textured pattern that helps print jobs stick while printing.

Product description

This Ender 3 glass bed is 100% borosilicate glass,which is resistant to cracking as a result of direct high heat and it will not warp during long term use,making it an excellent choice for 3D printer beds.



PLEASE NOTE:

*This surface is incredibly sticky at high temperatures for plastics such as PETG, PLA and ABS, the glass bed must come down to room temperature to release the model.Attempting to forcibly remove the print from the glass bed at high temperature WILL DAMAGE the proprietary surface.

*The flatness error of our ender 3 pro glass bed is within 0.2mm (about 0.1 mm),If you get any product with quality problems, please feel free to contact us for a replacement.

*The glass plate will have a loss of life, just use the solid glue when the adhesion is insufficient if the coating is damaged or scratched.



Temperature settings for different filaments:

1. PLA:50-70ºC

2. Flexible filament: 50-70ºC

3. ABS:100-125ºC ( 110ºCis recommended )

4. PC:100-130ºC ( 120ºC is recommended )

5. Nelon:90-120ºC ( 110ºC is recommended )

6. PP:100-130ºC ( 120 ºC is recommended )

7. PETG: 50-70ºC



Package include:

1 x glass bed (235x235x4mm)

4 x clips

• Excellent adhesion - Covered by microporous coating,as the ender 3 bed heats to high temperatures,it shows strong adhesion in printing (especially for PLA materials),no need to use glue.
• Easy removal of models - Once the glass sheet cools down to room temperature,the adhesion will be reduced,it's easy to take off models by hand or just with a scrapper for large models.
• Integrated with heated bed - Our new 3d glass plate can be placed on top of any existing hotbed surface and be held in place with simple clips,super flatness, fast and uniform heating for a precise print.
• Durable & easy clean - The special coating on the 3d printer bed is inorganic and has a hardness of 8 Mohs, it is capable to work at 400ºC.Scratch proof and dust proof, easy clean with alcohol/acetone.
• Compatibility - Specially designed for Creality Ender 3/Ender 3 pro 3D printer,it's also compatible with most of the Cartesian style 3D printer with a MK2 MK3 hot bed.

User questions & answers

Question:	Can this bed cover hold temperatures of 100 Degrees Celcius without deforming
Answer:	If it's the right size, yes. Don't know how thick the tarantula bed is, so can't say if the clips included will work or not, sorry. But binder clips are cheap and will do the job almost as well. FWIW, I'm real happy with how glass and clips work with my Ender 3 Pro. I am using TH3D's flex system on top of the glass, together these products provide the best surface I've ever printed on. I use ZERO, NOTHNG, NADA on the surface, my prints stick firmly and come off easily.
Question:	cleaned the surface with alcohol and acetone. Both surprised me as it seemed to attack the surface and left gray swirls on the finish. Is this normal
Answer:	Lol, no they definitely made a typo. It is 4mm thick.
Question:	Why would you include clips if you're supposed to permanently stick the glass to your print bed
Answer:	I’ve used mine for a couple of months now and I really haven’t seen any damage to the tip of the bltouch
Question:	one place in the description states 3mm thk and in another place states 4mm thk! Anyone know for absolute what thickness is actually being shipped
Answer:	Hello, thank you for your question, the tickness of glass bed is 4mm and you should adjust/recalibrate your Z-height after installing.

Product description

250mm x 250mm x 3mm Borosilicate Glass Build Plate/Bed for 3D Printer Pringbed (250x250x3mm Square)



Borosilicate glass material has excellent thermal and chemical properties than soda lime glass.

It is resistant to cracking as a result of direct high heat, making it an excellent choice for 3D printer beds.

BALITENSEN offers a wide range of various sizes of Borosilicate glass from length 100mm to 600mm.



Package includes:

1x Borosilicate Glass Plate 250mmx250mmx3mm

• 100% borosilicate heat resistant glass, low coefficient of thermal expansion.
• Extremely durable, doesn't warp during long term use.
• Polished edges to improve handling safety.
• Dimensions: 250x250mm, 3mm thick.