12 best 3d printer arts

Product description

Instructions:

The product is divided into two parts: A (upper)+B(lower)



-Part A: The top is a matte surface, and the back is magnetic (the interaction with the front of Part B plays an attractive role)



-Part B: The top is magnetic (with the adsorption under the A part), the back is the adhesive (posted on the printer platform, which plays a fixed role)



-If it fails to adsorb, please rotate it 90 degrees and try again.





NOTE:



1>This product is rated for use with PLA filaments ONLY. Any use with filaments with high shrinkage coefficients may experience malfunction or decrease in magnetic force over time. This will NOT prevent prints from warping.

2> This product is not for use with high-temperature printing applications above 70*C.





Easy removal 3D printing platform for PLA and PLA-based materials



How to use:



To use it, simply stick the bottom sheet onto your build plate place, then place the top half on top of the magnetic lower and start printing, peel up the top sheet with finished prints, then flex the top sheet to make the model pop off from the build surface. Snap the top plate back into place, and you're ready for the next round of printing.



Size:235X235MM (9.25x9.25 Inches)



Fit for Ender 3/Ender 3 pro 3d printer



Color:black





Package included:

1*Magnetic 3d printer Build Surface .

• ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.
• EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
• CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
• SIMPLE INSTALLATION: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.
• UNIVERSAL: Works with all FDM printer models, and all heated and non-heated 3D printer beds.

User questions & answers

Question:	Why doesn’t the top pad stick to the bottom magnet part
Answer:	One had a very slight indent the others were smooth. They seem perfectly round to me... I would think that no two sets would be exactly the same
Question:	What kind of texture does this leave? Is it like the Prusa powered coated texture
Answer:	You can’t bake in these, they are used for cutting a cake Layer once it is baked
Question:	Can the build surface be purchased separately from the magnetic pad that sticks to the heated bed? I've gouged a spot out of mine removing a print
Answer:	These cutters not only could cut cakes, and aslo good for cutting cookie dough, fondant, soft fruits, bread, sandwiches, cheese, or craft clay.
Question:	how thick is this bed ? Is this a two part bed
Answer:	The height of all these cutters, no matter the diameter, is 1 3/8".

• PTFE Blue Tubing - the blue color teflon tube outside diameter 4mm, inside diameter 2mm, density 2.15-2.20g/cm3
• PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm
• PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm
• Premium Material - the teflon tube made of durable PTFE (Poly Tetra Fluoro Ethylene) material, PC4-M6 Fittings is made of Copper; PC4-M10 Fittings is made of stainless steel
• Attention - small 3D printer accessories, please keep away from children

User questions & answers

Question:	how long is the tubing
Answer:	The cookie cutter depth is 1.18 in,which is suitable for most situations.
Question:	These fittings are water tight
Answer:	Great question! Usually the entire cleaning!It's not made to come apart easily, but it's also possible ~ on the end of the handle not visible in this picture is a smooth-headed bolt that can be unscrewed and then the handle removed. Thank you for your interest in Bukuwa.

Product description

Capricorn Premium XS bowden Tubing is enhanced with a proprietary blend of high performance additives. It was developed specifically for 1.75mm filament with an extremely precise internal diameter. When printing flexible filaments in a bowden system, the inside diameter of bowden liner is one of the critical feature for the successful print.

Specification

Capricorn Premium XS bowden Tubing

ID: 1.95mm ± 0.05mm

OD: 4.0mm

Attention: Small parts, keep away from children.

Package Including:

1 x 1M Capricorn Premium XS bowden Tubing

2 x PC4-M10 Pneumatic Fittings

2 x PC4-M6 Pneumatic Fittings

1 x Tubing Cutter

Product Warranty

Sovol is devoted to offer premium quality products to all cherished customers. Meanwhile supply 45 days money back guarantee and 18 months warranty.

If there are any questions, please feel free to contact us, Sovol Customer Service Team will spare no efforts to assist with you within 24 hours.

• 100% Original Capricorn XS Series tubing.
• Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate.
• PC4-M6 Couplers: thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of premium copper and plastic, sturdy and durable. PC4-M10 Couplers: thread M10/6mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of high qulity stainless steel and plastic, high hardness, antioxidtion, anti corrosion. The extruder fittings are PC4-M6 and the hotend fittings are PC4-M10.
• One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting.
• Any questions please feel free to contact us at any time. We will reply to you within 24 hours and provide technical support for you.

User questions & answers

Question:	Does it work with ender 5 plus
Answer:	Yes I have bought many for my Ender 5+ works great!
Question:	does the one that comes with the leveling nuts still have the cutter
Answer:	based on description, it doesn't. 1x 1 M Original Capricorn Bowden PTFE tubing 4x Hand Twist Leveling Nuts 4x Hot Bed Springs 4x M4x35 Screws
Question:	Will this fit the geeetech a20t printer? i am looking for a bowden tube but i have read other tubes dont fit the printer
Answer:	I am not positive that they will fit, but personally, I would think they will.

• ✔️New Double Gear Extrusion Mechanism. Had to change the extruder e-steps from 100 to 139
• ✔️UPGRADE: Perfect replacement for Creality 3D Printers CR-10/ CR-10S/ CR-10S Pro/ Ender 3/ Tornado, etc.
• ✔️All-metal aluminum alloy, High quality dual gear extrusion, stable and durable.
• ✔️For 1.75mm Filament. This Kit NOT include the stepper motor and instruction manual, we need to DIY :)
• ✔️Made by WINSINN, make sure the "WINSINN" label on the box for our after-sales service.

User questions & answers

Question:	It looks like a steal gear turning on a aluminium arm. I there a washer or something to protect the arm from the gear
Answer:	If you mean the tension arm, then yes, but it's not even moving much. If you mean the extruder gear from the motor (not included) then no. But it's point of contact is against the feeded filament. You probably don't need this part, per se, if you have your filament feeding nearly straight, such as from an external filament holder, but I would still recommend it. It's absolutely necessary if using the filament from an angle, such as from the top as the ender 3 originally has it mounted. I chewed through the cheap plastic one they provided within weeks. I've been running with this part for about 2 years without issue.
Question:	gear won't move as it isn't attached to the motor shaft, and there isn't a set screw included to attach the gear to the drive shaft. How to attach
Answer:	Apparently, the ender 3 pro upgraded to an engine model with a press fit type gear (or third party resellers are upgrading bits; mine ender 3 pro came from a reseller and was obviously either used or had parts swapped - I got like $250 worth of free bits preinstalled). You will not be able to remove this without destroying the motor. The solution (I hope, because I have the same problem) is to replace the extrusion motor with the older type, which will apparently cost $10-$25 here on Amazon. You want an ungeared 42-40, and Creality sells a full set of replacement motors here on Amazon for less than $30. I got halfway through replacing this very extruder unit when I discovered the problem
Question:	Is the dual gear extruder compatible with the mp select mini v
Answer:	It will not be compatible out of the box. You would need to recompile the firmware and change the steps per mm for the extruder. You need to make sure the drive Gea diameter is the same as your monoprice extruder if you don't want to change the firmware.
Question:	Are you now shipping the black bolt in the picture, or are you still shipping with the wrong bolt that causes failure
Answer:	Mine came with the silver threaded bolt that the idler gear with the bearings in it ride against. It will quickly destroy the bearings! Return it!!!

Product features

WINSINN Dual Gear Extruder - CR10S PRO

• New Double Gear Extrusion Mechanism. Had to change the extruder e-steps from 100 to 139
• UPGRADE: Perfect replacement for Creality 3D Printers CR-10/ CR-10S/ CR-10S Pro/ Ender 3/ Tornado, etc.
• High quality Double gear extrusion, All-metal aluminum alloy, stable and durable.
• Support: 1.75mm Filament.
• This Kit NOT include the stepper motor, motor bracket and instruction manual, we need to DIY :)

Some customers encountered gear wear problems. The solution is:

✔️Had to change the extruder e-steps from 100 to 139

Because the filament is forced to be centered in both drive gear grooves, the idler drive gear (the one not attached to the motor) is positioned on it's shaft by the motor drive dear. So, to center the idler drive gear properly, my suggestion for setting the unit up is as follows:

1) Assemble everything but do not lock the motor drive gear to the shaft.

2) Using a couple pieces of paper, shim the idler drive gear in the center of its bracket.

3) Clamp a piece of filament in the drive grooves and turn the motor a few turns. This should locate the motor drive gear in the correct position.

4) Lock the motor drive gear to the shaft, remove the paper shims, and you should be good to go.

Package Include:

1 x WINSINN CR10S Pro Dual Gear extruder Upgrade Kit (All Accessories show as Image 2)

Product description

Please noted that the pins is clamped with long nose pliers.



Specification:

Material: Aluminum & Stainless Steel & Brass.

Installation type: external thread connection

Nozzle size: 0.4mm

Operating temperature range： -40 ~ +260°C (-40 ~ +500 °F)



Package included:

Hot End Kit(Concluded Capricorn PTFE tube)

3*0.4mm Nozzle

3*Silicon Cover

• 100% Creality Original - Recently Creality has 2 kinds of heating block. Golden and Silver ones both are 100% Creality Original. The silver ones work for the same functions as the golden ones.
• Capricorn PTFE tubing - About 14 inch long. Due to its high lubricity and high-temperature resistance, it improves the printing quality and accuracy.
• Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
• With more terminal housing and pins as spare parts, in case fail installation and waste .
• MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W.

User questions & answers

Question:	Will this fit a tevo tornado? it's very similar to a cr
Answer:	It fit mine perfectly. I have the newer gold version of the Tevo Tornado.
Question:	Can I just swap in just the extruder hot end with the stock themister and heating tube
Answer:	yes, but you would just need to take off the wiring and re do it. was actually a bit easier to replace the entire thing
Question:	I bought this and installed it and it will only go up to 111 degrees c and takes 30 minutes to get there. any idea why? on an ender 3 plus clone
Answer:	I had a similar problem with my ender 3 when i first got it. It turned out that the power supply was switched to run at 220V. I switched it to 110V input and it started working as it should.
Question:	I bought this and installed it and it will only go up to 111 degrees c and takes 30 minutes to get there. any idea why? on an ender 3 plus clone
Answer:	This is a 24v unit. You probably have a 12v controller. If you swap the heater cartridge with a 12v one it will work fine. Double check with a multimeter on the terminals the heater connects to but this was my issue.

Product description

This dual Z-axis Upgrade Kit with Lead Screw Stepper Motor provides stability on X-gantry and accuracy on the 3d Printer with a direct-drive system, very easy to setup.

- Dual dual Z-axis structure provides more stability on X-gantry

- Original 42 stepper motor runs smoothly

- High cost-effective updates

Packing listing:

42-34 stepper motor x 1PC

Lead Screw Bearing Guide x 2PCS

Power Supply Holder x 1SET

Coupler x 1PC

Z Axis Lead Screw Bracket with Brass Nut x 1PC

Dual Z Stepper Cable x 1PC

Z Motor Bracket with screws and t-nuts x 1PC

365mm T8 Lead Screw x 1PC

Matching all screws and tools x 1SET

PLEASE NOTE: During the installation process, do not operate with electricity. If there is leakage or damage, please contact us for replacement or resend in time.  We provide technical guidance service if any problems met. 

• Dual Z structure with Lead Screw Stepper Motor Kit provides more stability and accuracy to your 3d Printer
• Great upgrade to the Creality Ender3 V2, Ender 3 Pro Ender 3, a perfect solution to avoid shaking on the X-gantry
• Original Accessories: equip with original T8 leads to 2MM screw, all-aluminum coupling and original 42 stepper motor
• A direct-drive system runs smoothly. Two lead screws are connected electronically through a splitter cable, no more belts
• Easy to setup, no welding or other modifications on your 3D printer. After-sale technical guidance service is online 24hours

Product description

Material: Aluminum & Stainless Steel & Brass

Installation Type: External Thread Connection

Scope of Application: 3D printer

Nozzle Size: 0.4mm

Throat Pipe Length: 30mm

Aluminum Block Size: 20 mm x 20 mm x 10 mm

Operating Temperature Range: -40 ~ +260°C (-40 ~ +500°F)

Thermistor and Heater Cable Length: 1M

Features:

100% brand new and high quality

MK8 Extruder Hot End kit, white wire is temperature thermistor, red wire is heating tube, heater voltage: 24v, power: 40w

Package Included:

1x Heating Block

1x Heatsink

1x Silicone Cover

1x 0.4mm Brass Nozzle

1x 30mm Throat Pipe (Built-in Teflon)

1x Thermistor and Heating Cable (1M Long)

5x Spare 0.4MM Nozzles

• Compatibility: 100% Creality Original. This assembled hotend kit from Creality is a plug and play replacement for Ender 3/ Ender 3 Pro/ Ender 3S.
• Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
• MK8 extruder hot end kit, white wire was temperature thermistor, braided wire was heating tube 24V 40W. Tip of the nozzle, aluminum heating block, throat pipe (built-in teflon).
• Five 0.4mm brass nozzle are included in this hotend kit. This kit can work with different sizes of MK8 nozzle: 0.2mm/0.3mm/0.4mm/0.5mm /0.6mm/0.8mm/1.0mm.
• Silicone Cover is provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and consistency.

Product description

Easy removal 3D printing platform for PLA and PLA-based materials. To use it, simply stick the bottom plate onto your build plate and start printing, peel up the top plate with finished prints, then peel off the top plate from the prints.

• ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.
• EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
• CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
• SIMPLE INSTALLATION: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.
• UNIVERSAL: Works with all FDM printer models, and all heated and non-heated 3D printer beds.

User questions & answers

Question:	does this come with a steel plate along with a magnetic build surface? And what are the dimensions
Answer:	No, it does not come with a steel plate. It does come with an adhesive magnet that you can stick to an aluminum or plastic print bed, which then gives something for the flexible magnetic print surface to stick to.
Question:	How do you clean this plate? i've seen people in the reviews having issue with ipa
Answer:	You can clean it with a little bit of rubbing alcohol and a cloth or cotton ball. That said, these magnetic beds should be considered a consumable. You will get a number of prints from one, but the PLA will build up over time and it will need to be replaced.
Question:	Is this the same stock one that comes with ender 3 pro? with the dragon head and ender text? the images show otherwise
Answer:	I have the Ender 5. The magnetic flexible bed cover on the stock version of the Ender 5 also comes with the "dragon head" logo. This bed cover has no "dragon head" logo and is not as magnetic as the stock version and does not adhere to the build plate as well. Dimensionally it fits as well as the stock bed cover. Based on the weak magnetic adhesion I won't buy another of this version.
Question:	Does the paper backing need to be removed? It covers an adhesive that would be difficult to remove
Answer:	The print bed itself has no adhesive or paper backing. The paper backing is on the flexible magnet that you can use to stick to your printer's existing bed, and then place the flexible print surface on the magnet. You will need to remove the paper backing to expose the adhesive if you want to use this stick-on magnet. The adhesive would be very hard to remove. But, if you already have a steel print bed, you can just place the flexible magnetic part on it, and not use the other part. The part with the adhesive is only for printers that have plastic or aluminum beds that a magnet won't stick to.

Product description

Product Feature:



3D Printer Cleaning Needle:

7 different sizes: 0.2mm, 0.3mm, 0.35mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm. Can meet your different needs.

15 flexible stainless steel needles for gentle maintenance of your nozzles and difficult to reach places such as feed gears.



Tweezers:

3D printing tweezers are suitable for maintenance nozzles and cleaning excess support material; it is anti-static, non-magnetic precision tweezers.



Clean Up Knives:

12 kinds of different blades Shape. The blades are made of high-quality stainless steel, which is sharp and durable, and can easily remove excess materials on the 3D printed model.



Scraper:

You can easily remove the prints from the printing table.



Pliers:

You can use the cutting pliers to process the print details, remove excess materials and burrs, and complete your work quickly and efficiently.



Cleaning Brushes Set:

Ideal for cleaning brushes to sweep away excess filament from the extruder nozzle or print bed. High Cleaning Efficiency, No Damage Extruder and Print Bed.



Tube Cutter:

Used for cutting Teflon tube and other thin material associated with 3D printing.



Package Includes:



1 x Removed Scraper

1 x Tube Cutter

1 x Pliers

1 x 0.2mm Cleaning Needle

1 x 0.3mm Cleaning Needle

5 x 0.35mm Cleaning Needle

5 x 0.4mm Cleaning Needle

1 x 0.5mm Cleaning Needle

1 x 0.6mm Cleaning Needle

1 x 0.8mm Cleaning Needle

2 x Tweezers

3 x Cleaning Brushes

12 x Clean Up Knives

• Total 35 Pcs include: 1pcs Removed Scraper, 1pcs Tube Cutter, 1pcs Pliers, 2pcs Tweezers, 3pcs Cleaning Brushes, 12pcs Clean Up Knives, 15pcs Cleaning Needles.
• Cleaning Needle: 15 flexible stainless steel needles for gentle maintenance of your nozzles and difficult to reach places such as feed gears. 7 different sizes of cleaning needles can meet all your needs.
• Tweezers: 3D printing tweezers are suitable for maintenance nozzles and cleaning excess support material; it is anti-static, non-magnetic precision tweezers.
• Clean Up Knives: 12 kinds of different blades Shape. The blades are made of high-quality stainless steel, which is sharp and durable, and can easily remove excess materials on the 3D printed model.
• Application: This 3D printer tool set including various important working tools, suitable for removing, finishing and cleaning the printed craft, which meets all your needs in DIY job, especially for beginners and model making enthusiasts.

User questions & answers

Question:	What pitch are the M10 threads
Answer:	Sorry,they are a set
Question:	I know this works on older Ender 3 models, does it work on the newest version
Answer:	There was the Mfg. Original and one that had sticky 3M on one side I adjust my bed height when changing bed cover.
Question:	Will it be necessary to cut the tube to length for an Ender 3 Pro
Answer:	China
Question:	Will these work on a Monoprice select mini v
Answer:	No, it is very sturdier and safe.

Product description

Product Specification:

Product Name:2020 aluminum profile X-axis synchronous belt stretching

Size:Fit 2020 series Aluminum extrusion

Material:Aluminum alloy

Surface treatment:anodizing

Color:Black

Package Content:

1 Kit 2020 Profile X-axis Synchronous Belt Stretch Straighten Tensioner

2PCS M4 T-Nuts

2PCS M4x8mm Screws

2PCS Allen Key



Any question or problem, do not hesitate to contact us,We will reply you within 24 hours.

• ★Material:Made of high quality Aluminum Alloy, Surface oxidation treatment,durable, fine workmanship
• ★Install:Already assembled,you don't need to assemble it by yourself,direct installation and ready to use
• ★Function:you can adjust the belt freedom, more better than original
• ★Widely Used: Widely used for Creality CR-10 Series,Ender-3 Series
• ★Package Content: 1Kit 2020 Profile X-axis Synchronous Belt Stretch Straighten Tensioner, 2PCS M4 T-Nuts, 2PCS M4x8mm Screws,2PCS Allen Key

Product description

Fit for 2020V series Aluminum extrusion

Wheel Color: black

Material:Aluminum Alloy and Polyoxymethylene

Plate Size: 50mm*50mm*6mm

Wheel Outer Diameter: 15.2mm

Package: 4pcs Small V-Wheel with Plate

• 【Material】 Aluminum Alloy and Polyoxymethylene, durable and reliable
• 【Widely Used】Fit for 2020V series Aluminum extrusion
• 【Dimensions】Plate-L*W*H: 50mm*50mm*6mm, Small V-Wheel diameter:15.5mm
• 【Install】Easy to assemble and disassemble
• 【Package Include】4pcs small V-Wheel with Plate

User questions & answers

Question:	What’s the weight limit it’ll withstand without breaking
Answer:	It does if you have installed the bottom magnet portion of the bed pad. It a two part process. One is the top and one is the bottom, the bottom is like a big sticker, you need to peel of the one on your bed, and remove all of the glue on the metal plate. Then replace it with the " bottom" part of the magnetic bed. Then the rest is easygoing Hopefully this was of some help
Question:	Does this fit 80/20 inc 20mm square extrusions? They do not have a V groove. They have a 5.25mm slot
Answer:	Yes, it leaves a dull, slightly rough, textured surface on the bottom of the model.