3 best alex toys alex toys toys for 3 yr olds

• [ALL NEW DUAL DRIVE TECHNOLOGY] The world’s first in a 3D printing device. Featuring improved power, durability, and reliability for a superior doodling experience.
• [THE 3DOODLER APP] Get an interactive experience! The app is packed with dedicated easy to follow stencil section and step by step interactive instructions, receive badges for completed projects and photograph & share your creations directly on social media. The App is fully built on iOS & Android.
• [EASY TO USE] Just Plug the 3D Pen in, insert 3Doodler Create plastic, Wait for the 3D Pen to heat up and then you're good to extrude!
• [FREE 15 COLORS OF PLASTIC REFILLS & STENCIL BOOK] This 3D Pen comes packed with 15 different colors of 3Doodler Create plastic refills & a comprehensive activity guide book.
• [SMOOTH 3D DRAWING EXPERIENCE] Get the best 3D drawing experience by only using the best and safest non-toxic 3Doodler Create Plastic Filaments. The Create+ 3D Printing pen is compatible with 3Doodler Create 3mm PLA, ABS and Flexy Plastic only.

User questions & answers

Question:	Is this wireless
Answer:	No. It's not. We found a power pack for it from another vendor that makes it more mobile.
Question:	Will this work with the 3D doodler start
Answer:	It does not. The 3doodler start requires smaller
Question:	The description says 10 inch sticks but the product dimensions say 6.1x3x.4. which is correct
Answer:	The 3Doodler Create plastic is 10 inches in length and straight cut. Can we ask where did you get the 6. 1x3x4?
Question:	Does this filament fit 3doodler create plus
Answer:	Hi, yes this filament is used for the 3Doodler Create+ 3D pen. Thank you.

Product features

Everything You Need

The complete package! This 3D Pen comes packed with different colors of 3Doodler Create plastics & a comprehensive activity guide book.

Plastics Made In The USA

3Doodler Create plastic is safe and non-toxic. The Create+ 3D Printing pen is compatible with 3Doodler Create 3mm PLA, ABS and Flexy Plastic only.

Extra Templates

Doodle for hours with this 3Doodler booklet that includes a wide variety of creatives project templates for you to make!

Now with Dual Drive

Greater control of speed for different Doodling techniques, optimised temperature control for enhanced compatibility with different plastic types.

Easy as 1, 2, 3D

The latest version, 3Doodler Create+ 3D Printing Pen!

Extrude heated plastic that hardens almost instantly, so you can draw 3D structures, freehand or on stencils.

Decorate, Fix & Hack

A handmade gift for a friend, a decoration for your next party, you'll be amazed by all the stuff you can make with the 3Doodler Create+. Or, if you're a DIY-er, this versatile tool can help you fix worn-out cables, improve a kitchen hook, and more. Now think of the possibilities.

Make Art, Design, Personalize

The world is your canvas. With over 70 colors at your fingertips in more than 3 different types of materials, the possibilities are endless. From whimsical masks to adorable figurines, modern jewelry to an entire runway outfit, what will you create?

Product description

Doodle, sketch and paint in 3D with this quality pen. See images above. It features variable extrusion speed control and large OLED display to help monitor heat. The temperature can be adjusted from 130 to 240 C in 1 degree increments, to help fine-tune the thickness & flow-rate of extruded material. This drawing kit comes with a lightweight, ergonomic stylus, 3 colors of ABS plastic and a 100-240V AC 50/60Hz adapter. It has a Power Output of 10 Watts with an Input power of 5 Volts/DC 2A, so it can be used safely outdoors as well. FCC, CE and RoHS-certified. Turn your ordinary drawings into 3D works of art. Order yours today!

• Watch imagination come to life with the Professional 3D Pen
• Adjustable feed lets you regulate speed & flow for optimal control of material while you're drawing
• Temperature is adjustable in 1 degree increments from 130 to 240 C, for optimal fine-tuning
• Large, OLED display lets you monitor temperature of material to help you achieve a wide variety of effects
• Kit includes 3 colors of ABS plastic filament A/C adapter and slim, ergonomic touch pen with 1 year limited warranty

User questions & answers

Question:	I want to use a 3d printing wheel filament to use it continuesly but will it rotate the filament as i feed it
Answer:	Desktop 3D printers that use a spool have a more robust feed mechanism than this pen. If you have your spools set to feed very smoothly and easily, like on a ball bearing setup, you should be OK. Where you might have issues is with having the spool on a solid plastic rod type holder which can add more friction or with some brands of filament that are not wound as well as others and can bind which also could be a problem. If you can employ some sort of method of keeping some slack in the filament so you're not pulling straight off the spool that seems ideal.
Question:	once the pen is heated and the abs starts to feed through the pen stops and starts cooling down mid draw causing you to reheat and restart
Answer:	An update as we had not seen this question earlier, Robert R had the correct answer. There was an issue with some of the power adapters that were packaged last year where power could momentarily drop on speed settings less than full speed and the pen would return to standby mode. Any 3D Pen Pro sold after March 2019 will not have this issue, and if you have one from last year and see this then please email us at support@mynt3d for a replacement.
Question:	How bad is the odor from the filaments? Daughter with scent allergies
Answer:	ABS fumes are bad for you. PLA is better, no matter what filament you use you should use it in a well ventilated area. PLA has less of an ordor and is a corn based plastic that is considered safer by 3D print enthusiasts.
Question:	How offten does this pen jam and how do you clear it
Answer:	Hi John, the most common cause of a jam (in any 3d pen) is deformation of the filament. This can be caused by incorrect temperature settings or an irregularity in the filament, and what happens is the heat causes the filament deform so that is not the right size/shape to pass through the pen. Typically this can be resolved by backing out the filament, cutting off the deformed section and continuing. However sometimes, the deformed section pulls off and remains lodged in the nozzle. One of the great things about our pens is that you can pop off the service door, easily remove the nozzle, remove the deformed section of filament and the pen is good as new. The key to avoiding jams is using high quality filament, setting the temperature correctly and most importantly, if the pen stops feeding normally pause your work and back out the filament instead of trying to force it through the pen. Following these tips, you shouldn't ever have jamming issues.

Product features

Elevate your imagination

Hold the magic of 3D printing in your hand with the MYNT3D Professional 3D Pen. Now you can use FDM technology in any application varying from drafting and prototyping to spatial learning and three dimensional sculpting. Whether you're an engineer or an artist, the MYNT3D Pen will take your design projects to greater heights.

Works with Nearly Any 1.75mm Filament Under the Sun

We at MYNT3D believe you should be able to use any thermoplastic you wish. ABS and PLA are a given, but what about wood or bronze infused filaments? If it is 1.75mm and melts between 140-230° C, then it will work in the MYNT3D Pen.

Fast, Slow, and Anywhere in Between

One speed isn't good enough for your car and it's not good enough for a 3D pen either. With the MYNT3D Pen you can crank up the extrusion speed for larger fill in areas and turn it down slow to create intricate works of art. The stepless design lets you dial in the optimal speed for any task you can throw at it.

Product description

Doodle, sketch and paint in 3D with this quality pen. See images above. It features a stepless variable extrusion speed control that allows for dialing in the perfect flow. The temperature can be changed to allow for ABS or PLA printing. This drawing kit comes with a lightweight, ergonomic stylus, 3 colors of ABS plastic and a 100-240V AC 50/60Hz adapter. It has a Power Output of 10 Watts with an Input power of 5 Volts/DC 2A, so it can be used safely outdoors as well. FCC, CE and RoHS-certified. Turn your ordinary drawings into 3D works of art. Order yours today!

• Turn your ordinary drawings into 3D works of art
• Stepless speed slider lets you regulate flow for optimal control of material while you're drawing
• New for 2019: ultrasonic sealed nozzle is nearly clog-proof and provides market leading durability
• The Super 3D Printing Pen is great for kids, artists and engineers of all ages
• Kit includes 3 colors of ABS plastic filament A/C adapter and slim, ergonomic touch pen with 1 year limited warranty

User questions & answers

Question:	I can’t get the filament to dry in time for on-the-air drawing. How can I draw upwards and make a joint
Answer:	Well for me I just held it in place... it just hangs there from the tip of the pen and you have to pull it tight. But, after about five/six seconds it should harden enough to pull the pen away and you have a verticle line. But, my brother has a desk fan set up that he has turned towards his work and said it works well. You just have to make sure the fan isn't too close and bends the plastic. But, you shouldn't have an issue getting verticle lines if you just hold it in place for a few seconds.
Question:	What size filament does this require
Answer:	This uses standard 1.75mm ABS and PLA.
Question:	what material filament do you recommmend for teenagers due to ... smells, odors, VOCs, is anything available environmentally friendly
Answer:	PLA produces very little odor and is a plant-based bioplastic.
Question:	what temp does it run at
Answer:	210 C for ABS and 190 C for PLA

Product features

MYNT3D Super 3D Pen

Draw, design, build, repair and more with the MYNT3D Super 3D Pen. Check out our projects and tutorials guide online to get your imagination flowing!

Based on the Professional 3D Pen

The Super 3D Pen uses the same gearbox and replaceable nozzle design as the Pro 3D Pen. It does not have the OLED display or discrete temperature adjustment. There is instead a temperature adjustment screw for switching between ABS and PLA.

Easy to use

Red light indicates power. Green light flashes for heating mode and stays lit for ready mode. And away you go!

Dial it in

The stepless speed slider gets you the perfect extrusion speed for your current task. Set it to a crawl for intricate details and power it up for larger fills.