12 best side brushes

• Replace a defective or missing side brush motor
• 2 screws to install!

User questions & answers

Question:	Will this work woth the irobot roomba
Answer:	It lays on latex very well - cleans well also - you will be very pleased with the results.
Question:	Does this work for the
Answer:	PIC1 has a standard handle, PIC6 has a straight “sash” handle. PIC11 is like a PIC1, but with stiffer bristles. All have the oval angle head.
Question:	Does this come with the screw to hold the brush on
Answer:	Manufactured in China.

Product description

The Neato BotVac Side Brush helps you get deep into corners and right up against walls and base boards to ensure superior cleaning coverage.

• Nullify
• Imported
• Precise edge cleaning – gets close to walls and deep into corners
• Enhanced cleaning coverage
• Easy to Install – Magnetic so you just pop on
• Compatible with all Neato Botvac Series, Botvac D Series, and Botvac Connected robot vacuums
• Always use Neato Genuine accessories. Using non-authorized accessories can damage your robot and void your warranty.

User questions & answers

Question:	Will this brush fit my Neato Botvac 70E
Answer:	Hello, Bass brushes are made in China Best Regards,
Question:	will this fit the botvac
Answer:	This brush is a very coarse bristle. It was too rough for my family liking. the bristles seemed almost "sharp". If we had less thick hair that was straight it would probably be nice.
Question:	does it fit Botvac D7 Connected
Answer:	How the brush is built. Front wood assembled with back to hold cushion bristle face.
Question:	Is this made by Neato? Or is this brush made by some other manufacturer
Answer:	I would think that the stinger pro has stiffer bristles on the “stinger” part. I think it may even say that somewhere on there.

Product features

Neato Botvac D Series Brush Kit

Perfect for Homes with Pets and Allergy Sensitivities.The Neato Botvac Series Brush Kit keeps your Neato robot working at peak performance. Includes the Combo Brush which offers superior pick-up of pet hair. Plus 2 side brushes keeps your robot cleaning close to walls and deep into corners. The Cleaning Tool lets you keep your brush and filters clean.

Product description

This is the newly designed side brush module for all Roomba models 500+ (this includes all 500/600/700/800 series). The newer design helps prevent hair and debris from getting underneath the bursh and melting the case. This motor design seals it off much better. The screw and the brush have also been improved. This is your chance to replace or upgrade your existing side brush module.

• New design improves performance.
• Helps keep hair and debris out of the brush motor.
• Upgrade your old side brush module today!
• Better design with a better brush and screw.

User questions & answers

Question:	In what way has this been upgraded compared to the original part
Answer:	Hello, Yes, they are. Some time ago they changed the look of some of their brushes, making then with softer, pointer of stiffer bristles. Hope this helps. Best Regards, The Bayside Brush Co
Question:	Anyone find that it still doesn't work? I bought a 2nd one in case it was a dud. Still don't work. Brushes don't rotate
Answer:	HI, This will be an approximate measure. From tip of brush to end of handle 9in. Brush paddle 41/2 - 5 in. Handle 4+ in. Back side of brush to end of bristles 1" ish. Brush is not heavy. I have thin hair and find I do like the paddle size as it gets more hair at one time. Hope this helps. Have a good day.
Question:	Is this the same part that's available on irobot.com for
Answer:	All of our customer service staff members happen to be right handed and they all tried brushing their hair using this brush with their left hand. 9 out of 14 said it felt OK with no problem. The remaining 5 said it felt better using their right hand.We sell a lot of these brushes with no returns. I'm sure many of them were left handed. If you purchase this brush from New Skin Beauty 'N Things and it does not feel right in your hand, just return it in original packaging for a full refund. We donate them to a women's shelter in our local area.Hope this helps.New Skin Beauty and Things LLCCustomer Service Department
Question:	will this fit a 550 series
Answer:	Model number is 54. It sure looks like the brush in the picture.

• 【BRAND NEW】: Replacement Side Brush for ECOVACS DEEBOT N79S & N79 Vacuum Cleaner
• 【PERFECTLY MADE】: Fully compatible with ECOVACS DEEBOT N79S & N79; Washable and work same as original parts
• 【AFFORDABLE KIT】: Kit contains the essential part you need to maintain your ECOVACS Vacuum cleaning performance, which includes: 8 Side Brushes
• 【PREMIUM QUALITY】: Manufactured with premium PC and incised with high precision machine tools to ensure perfect fit between accessories and your ECOVACS Vacuum; Certified with ISO9001 will bring the best to your ECOVACS Vacuum
• 【WORRY-FREE WARRANTY】: 100% satisfaction or money back

User questions & answers

Question:	Do these come with the screws for the robot
Answer:	Please refer to the manufacturer for this answer. My personal opinion is that the bristles are standard length. This is my go to hair brush. I really love the product.

Product features

Specification & Compatibility:

This replenishment kit is made for ECOVACS DEEBOT N79S & N79; it contains the essential part you need to perform regular maintenance on your ECOVACS DEEBOT N79S & N79 .

Compatible with:

• DEEBOT N79S & N79

Replacement Kit:

Replace parts frequently will keep your ECOVACS operating at peak performance. This kit is ideal for your DEEBOT N79S & N79, it contains following:

• 10 Side Brushes (8 side brush with 2 bonus)

Premium Quality & Durable Design:

Manufactured and tested to perfectly work with your ECOVACS. Brand new filters allow your ECOVACS to reach deeper for a more thorough cleaning and greater suction. Washable and reusable filters work together to grab dust, dirt, and large debris to help thoroughly clean your floors.

Packaging & Others:

Well packaged to ensure safe and speedy delivery.

This part is made by 3rd-party manufacturer. Any use of the ECOVACS brand name, model or part designation for this product is solely for purpose of demonstration.

Product description

Descriptions:



Condition: 100% brand new and high quality



Product Name: Side Brush Module Motor



Compatible with: For iRobot Roomba 500 600 700 800 series







Features:



* New Upgraded motors design improves performance.



* Helps keep hair and debris out of the brush motor.



* Used to replace your old side brush module.



* Better design with a better brush and screw.



* For iRobot Roomba all 500/600/700/800 series.





Package Included:



1 x Motor



1 x Side Brush

• For iRobot Roomba 500 600 700 800 series
• New Upgraded motors design improves performance
• Helps keep hair and debris out of the brush motor
• Original and easy installtion
• Better design with a better brush and screw

• What's in the Box: 9pcs Side Brushes with screw preinstalled.
• Compatible with iRobot Roomba 900,800,700 and 600 Series 960 980 985 860 870 877 880 890 891 895 805 761 770 780 790 614 650 665 671 675 690 Models.
• To keep your robot running at peak performance, the parts are recommended to be replaced every 2-3 months.
• It is easy to be replaced and installed on your robot vacuums.
• Shipping with a brown box to prevent from being damaged in transit.

User questions & answers

Question:	Will this fit 614? The ones I purchased for the 600 series did not fit. My original brush looks like the pet model brush with the recessed screw
Answer:	Hello, The best way to clean any brush is with a hairbrush cleaner. This item will remove all the dead hair that gets accumulated on the bottom of the brush and the sebum that gets stuck on the bristles. You may check the LPC2 form Kent hair brushes. Hope this helps. Best Regards. The Bayside Brush Co
Question:	Does this fit 700 series
Answer:	Hello, Unfortunately, not 100% because it has a plastic cushion. Best Regards,
Question:	How long is each brush
Answer:	The wood isn't going to soak up water but, the base where the pins are will probably collect water. Why don't you buy a Tangle Teezer brush for that purpose instead? I love this small oval brush for travel or going to the gym.
Question:	My roomba 690 has the blue rim around the side brush. Does this fit this particular 690 blue rim model
Answer:	I would guess about 6 inches. I bought this for my daughter who is almost three and it's perfect. Best brushes ever.

Product features

Durable and Everlasting

The bristle brush are made from high-quality nylon material and bristles are increased 20% more. it is durable and not easy to fall off the brush arms.

Screws Pre-installed

Each side brush was pre-installed with a screw before shipment, no worry about missing the screws any more.

Perfect Fitting

Being Manufactured according to the original size and perfect fit for side brush module without any deviation.

Step 1

Turn the screw driver anticlockwise and loosen the side brush

Step 2

Pull upwards to take out the side brush

Step 3

Making the hexagon fit each other and put a new brush back.

Step 4

Turn the screw driver and clockwise and tighten the side brush, and then finish installation.

• Replacement Side Brush Fit Model: Roomba 500 600 700 Series . Do not compatible with 645 655 Pet models.
• Replacement Roomba Brush Advantages : Cleans along edges and other hard to reach places to remove more dust, dirt, pet hair, and debris than a normal brush alone.
• How to clean the roomba brush : Step 1: Use the corner small screwdriver to remove the screws. Step 2: Remove the brush,remove the hair or debris,and put the side brushes back in place
• How Often To Clean : Keep your home clean by changing the filters frequently - once every month or two, depending your usage.
• Replacement Brush Tips : These brushes are easy to replace as part of routine vacuum maintenance. This Replacement 10-pack includes three easy to install brushes with needed screws-replace one brush now and keep a couple on hand for your next change out.

User questions & answers

Question:	Will these fit the Roomba
Answer:	It is 10 inches in length. It's perfect for travel I've used one for that purpose over the last 10 years as it fits nicely in any suitcase.
Question:	Fit
Answer:	This item does come in a comparable long handle version. We will have it up on our storefront within the next few days. Please check back.
Question:	Do these filters fit the roomba
Answer:	The full length is 10.41 inches
Question:	Do these fit the roomba
Answer:	It depends on how flexible you are. I do it, but it takes some work. My last brush had a slightly longer handle and it worked better for my back.

Product description

This is a 3-armed white version replacement side brush used to prevent early failure of the side brush motor from excessive power requirements to turn the 6 arm brush, more durable than the previous red models.

Keep your iRobot Roomba operating at peak performance! The innovative Replacement Side brush for iRobot Roomba Professional Series Robots reaches deep into corners and edges to remove more dirt, dust and debris. Side brushes are easy to remove and replace as part of routine maintenance.

• ✔Compatible with MOST iRobot Roomba 500, 600, 700 Vacuum Cleaning Robots, except 645, 655, 675 & 670, 671, 690
• ✔3 Pack replacement Side Brushes with screws. There are two types of screw (long with wide head and short with narrow head), both work for our brush. Long screw does not go into the indention of brush, but still can be locked on machine.
• ✘DO NOT Work on: 645, 655, 675 & 670, 671, 690, They use 800 series side brush. Please search ASIN B0779KG79Q for compatible brush
• ✔Work on the following models: 510 530 532 535 540 545 550 552 560 562 570 580 581 582 585 595 600 620 630 650 660 700 760 770 780 790
• ✍ INSTALLATION: First place the brush on the machine. Secondly, insert and tighten the screw. (Check on the installation video)

User questions & answers

Question:	Will this fit on a Roomba
Answer:	These subassemblies are standardized across a large number of model numbers. They will fit.
Question:	Does this pack come with the screws to attach the brush to the body of the robot
Answer:	Sorry, no screws were included.
Question:	Is this an original manufacturer's part
Answer:	I am not sure if made by manufacturer, but they work great.
Question:	Poor packaging. All 3 arrived with curled/"bent" bristles. Anyway to safely straighten them out without damaging them
Answer:	Mine came in okay but if yours are badly bent, try some heat on them, like with a hair dryer or very hot water. This should soften the bristles and you can try and straight them out. If there not bent to badly, just use them they will work okay. Make sure if you have never change these before, you use the same screw that was in the original.

Product description

Replacement accessory kit for ECOVACS DEEBOT Robotic Vacuum Cleaner, fit below Ecovacs models:



Ecovacs Deebot N79 Robotic Vacuum Cleaner/ Deebot DN622/ Deebot DN622.11/ Deebot DN622.31

Ecovacs Deebot N79S Robotic Vacuum Cleaner

Ecovacs Deebot N79E Robotic Vacuum Cleaner

Ecovacs Deebot N79W/N79W+ Vacuum Cleaning Robots

Ecovacs Deebot 500 Robot Vacuum Cleaner

Ecovacs Deebot 661 Convertible Vacuuming or Mopping Robotic Vacuum Cleaner

Ecovacs Deebot 600 Robot Vacuum Cleaner

Ecovacs Deebot 601 Robotic Vacuum Cleaner/Deebot D601







High quality Ecovacs Deebot n79s Replacement Parts, made of high-strength and environmental protection material, inexpensive way to fix or repair your vacuum



Our Deebot n79 Replacement Parts/ dn622.11 Replacement Parts, can help your Ecobot vacuum to remove dust, dirt, hair, pet fur and a variety of microorganism effectively



Suggest to replace the Ecovacs Deebot n79s Filter/ Main Brush/ Deebot Side Brush every two months for high performance, depending on your usage.



If you are not satisfied with our Replacement Parts Deebot, just contact us, we will process the return and full refund, and we undertake the return shipping fee.br>

Any questions about our Ecovacs Deebot Replacement Parts , welcome to contact at any time.



ECOVACS DEEBOT N79S/N79 accessories/replacement for deebot n79s br>



Package includes:

1 pcs deebot filter net,

6 pcs deebot filters,

6 pcs deebot side brushes,

1 pcs deebot main brush





Declaration:

Our products are the replacement accessories for ECOVACS,not the original. The ECOVACS brand name are the registered trademark of the respective owner. Any use of the ECOVACS brand name, model or part designation on our listing is for purpose of demonstrating compatibility.

• Deebot Accessory Kit compatiable with ECOVACS DEEBOT N79 N79S N79SE N79w N79W+Vacuum Cleaning Robots DEEBOT 661 600 D601 DEEBOT 500 DEEBOT DN622 DN622.11 DN622.31
• Deebot N79s Replacement Parts, 100% compatible with your original Vacuum Cleaner Deebot Buddy Kit
• Deebot Replacement Parts can keep your DEEBOT N79 N79S running at peak performance by replacing the replacement accessory kit every 2-3 month, it also depends on your useage
• Easy to Install these Deebot dn622.11 Replacement Parts/Deebot 500 replacement parts
• 30 days warranty, full money back or free replacement guarantee for this ECOVACS Buddy Kit DN622-KTA,DO3G-KTA, Deebot vacuum brushes n79w

User questions & answers

Question:	I’m looking for parts for a Eufy 11 plus. What is the diameter & length of the brush
Answer:	This brush is only made by Neato.
Question:	Will this fit a deboot dc3g
Answer:	It should, you can take out the old one first and compare just to be sure.
Question:	Our ecovacs deebot n79s stops and beeps after every 2 min. will the replacement kit help
Answer:	Yep. That’s what model I bought it for and it works just fine
Question:	Does this replacement brush work for the deebot
Answer:	Two little philips screws.. pops out

Product description

Product Description



Kit Includes: 3 x Side brushes.



Please note that EEEKit and Amazon.com are the only sellers on Amazon that are authorized to sell products with the EEEKit name. Buy from sellers EEEKit or Amazon.com to ensure authenticity and better service.



Product Specification:



How to replace side brush:

1.Loosen the side brush screw with a screw driver or coin and remove the side brush

2.Remove the side brush

3.Install the replacement side brush by firmly pressing it onto the side brush axle until you feel and hear it snap into place. The side brush should be securely attached to the robot without the screw in place

4.Once the side brush is securely snapped on, replace the screw. Be careful not to over-tighten the screw



Kindly Note:

This is not an iRobot Original product and is not covered under any iRobot warranty

• Compatible with iRobot Roomba 500&600&700 Series
• Captures particles and fine dust including mold, spores, cat and dog dander, dust mites, pollen and fibers from textiles and carpet
• Filters helps you get deep into corners and right up against walls and base boards
• Comes with screw, easy to remove and replace as part of routine maintenance
• Replace them every 1-2 months , depending on the environment that your Roomba cleans

User questions & answers

Question:	Has anyone used this on 690 with the blue rim
Answer:	Yes, that's what I have and it fit perfectly.
Question:	Does this product come with 3 screws
Answer:	I have a Neato Botvac Connected and it fits fine. But the product description says it works with the d series and connected series. Hope that helps.

Product description

​Item Details:

*Replacement Vacuum Cleaner Side Brush Motor for iRobot 500 600 700 800 & 900 Series Robots

*100% brand new and high quality

*Made of high quality materials, more durable

*Helps prevent hair and debris from entering the brush motor

*Better design, better brushes and screws

*Color: As Pictures Show

*Fitment: Replacement For iRobot 500 600 700 800 900 Series For iRobot 510 For iRobot 530 For iRobot 531 For iRobot 532 For iRobot 533 For iRobot 535 For iRobot 536 For iRobot 540 For iRobot 545 For iRobot 550 For iRobot 551 For iRobot 552 For iRobot 560 For iRobot 561 For iRobot 562 For iRobot 570 For iRobot 580 For iRobot 581 For iRobot 585 For iRobot 595 For iRobot 600 For iRobot 610 For iRobot 620 For iRobot 630 For iRobot 650 For iRobot 653 For iRobot 654 For iRobot 660 For iRobot 700 For iRobot 760 For iRobot 770 For iRobot 780 For iRobot 790 For iRobot 800 For iRobot 870 For iRobot 880 For iRobot 980

Package Contents:

1*Motor (Side Brush is Not Included.)



The gray motor needs to be used with 8 series side brushes and screws. If your machine model is 600 series or 700 series, it may be inappropriate to use the standard screws provided with the original system to connect the brushes. With 8 series side brushes and screws, the motor module can be used normally

• New design improves performance
• Helps keep hair and debris out of the brush motor
• Upgrade your old side brush module today!
• Better design with a better brush and screw.
• Package Contents:1*Motor (Side Brush is Not Included)

User questions & answers

Question:	Description says fits series 600, it does but needs longer series 8 side brush screws. Do you sell the series8 screws for the side brush
Answer:	Yes, it will works with 70E. According to the specifications The Replacement Side Brushes Fit for All Neato Botvac Series, Botvac D Series, and Botvac Connected Robot Vacuums

• The Roborock Side Brush is designed to sweep the edges of rooms, flicking edge dust into the path of the main brush and the suction system.
• Made from silicone, it cleans thoroughly without marking furniture or walls and lasts for longer than side brushes using nylon bristles.
• A tangle-free design reduces jams caused by tangled hair.
• Corner optimized cleaning accelerates the side brush to 330RPM when cleaning edges for a more thorough clean.
• Away from edges, the side bush slows to 130RPM, allowing it to continue guiding dirt while preventing it from flinging dirt into clean areas.

User questions & answers

Question:	does it work with e
Answer:	Based on what the tech told me, the motor will supposedly last longer than the original due to some bearing improvements within the housing.
Question:	works with roborock e
Answer:	you probably have a defective roomba (motherboard). you can easily test these side brush modules by touching a 9-volt battery to the contacts on the back.
Question:	Is this thing programmable to do or not do certain rooms
Answer:	It looks identical to the part that is available on iRobot.com. Even after shipping, it is less expensive to go through iRobot than using Amazon Prime.
Question:	How do you use the strip to prevent the vacuum from mopping a carpeted area but will still vacuum that same area.Below, states the strips are permanen
Answer:	It drops right in. I did buy this from Amazon and realized it was simply the 800 series brush. Last time I looked was cheaper on irobot's web site. Just select 800 series and look up side brush. Same part number I paid more from Amazon for.