13 best shelves for garage

• Resin
• Easy to assemble - no tools required
• 100lb maximum weight capacity per solid shelf
• Interconnect multiple units for maximum storage capacity (side by side)
• Assembled size 32in wide x 54.5in high x 14in deep

• STRONG & STURDY: Wall mounting brackets included for added strength and safety. Each shelf holds up to 200 lbs. when mounted.
• STABLE: Feet height can be adjusted for added stability on uneven surfaces
• EASY ASSEMBLY: No tools required to assemble
• SPACE SAVER: Maximize garage, home, or shed space with 4 tiers of storage
• TRUE HEAVY DUTY: This product is almost twice as heavy as other plastic shelving units. What you get is a 30 lb solid structure shelving unit holding 30% more weight than other plastic shelving units
• MADE IN USA: Engineered with fully sustainable recycled material. Shelf outside dimensions: 20”D x 48”W x 55”H

User questions & answers

Question:	What is the length between the bars
Answer:	Good question. 42 inches.
Question:	is it possible to add casters to the unit
Answer:	I’m not sure if they have that as an option, but I think if I needed to I could work it out.
Question:	how much does unit weigh in box
Answer:	About this item STRONG & STURDY: Wall mounting brackets included for added strength and safety. Each shelf holds up to 200 lbs. when mounted. STABLE: Feet height can be adjusted for added stability on uneven surfaces EASY ASSEMBLY: No tools required to assemble SPACE SAVER: Maximize garage, home, or shed space with 4 tiers of storage TRUE HEAVY DUTY: This product is almost twice as heavy as other plastic shelving units. What you get is a 30 lb solid structure shelving unit holding 30% more weight than other plastic shelving units MADE IN USA: Engineered with fully sustainable recycled material. Shelf outside dimensions: 20”D x 48”W x 55”H
Question:	Please provide assembly instructions
Answer:	There were no real instructions. There were some 'feet' that took the shelf off the ground, the uprights and the caps on the top. I used a hammer and a knife to take some of the tags off some of the pieces so they would fit. I had to use a little trial and error to put it together. Good Luck!

Product description

An Amazon Brand

• 5-shelf shelving unit for your kitchen, office, garage, and more
• Each shelf holds up to 350 pounds (evenly distributed); total max load weight is 1750 pounds
• Wire shelves adjustable in 1-inch increments; no tools required
• Durable steel construction with black-coated chrome finish; adjustable leveling feet
• Product Dimensions: 36 x 14 x 72 inches (LxWxH)

User questions & answers

Question:	Could you set this up as 2 shorter shelfs side by side
Answer:	You would need to check your rack to see in the poles unscrew in the middle. I get the impression there were different versions of these racks. If they do you need a set of 4 caps, 4 threaded inserts and 4 casters or levelers. Check your pole size too, likely either 1” or 3/4” depending on the version.
Question:	Can you order more shelves? I don't want to buy another unit, I just need more shelves to space them closer
Answer:	Whitmor sells the shelves separately for $12.50. You can call Whitmor, Inc at 888.944.8667 or go online. Whitmor links to Amazon.
Question:	where can i download the assembly instructions
Answer:	super simple assembly. take 2 peices of the black thingies. they should have a mark saying top or a dot or something. they are conical so you snap them together on the legs. start on the near bottom of a leg on a ring and slide the cap till it snaps in place. do all 4 on the same ring, 1 level at a time.so caps, snap, shelf. the 1st shelf is the trickiest but once the second shelf is in place it has better stability. if this is not helping, try youtube.
Question:	I'm very frustrated. the plastic shelf holders are not snapping and staying closed what am i doing wrong
Answer:	I've purchased several of these and just have one more thing to add from the other comments. First, from the other comments you can gather that the pieces do not snap together with each other - they snap to the vertical poles. That's an important point left out of the instructions. Second, where most are saying hold them together and slide them down the vertical pole until they snap, you can do that but they most likely will snap in the same location, giving you same size shelves. The shelves are adjustable, so if you want different heights for each shelf, find the groove on the pole that is closest to giving you the shelf size you want. Then you can, making sure the arrow of the 2 interlocking pieces point up, just lay both pieces close to the groove and then you can slide them up or down to find the closest place to that spot where they will snap. One more thing is you need to make sure you put the shelf over the 4 poles as level as you can. Even though the pieces snap onto the pole, they can be knocked off if the shelf hits them too hard on one side or the other if you try to place it on askew. Doesn't have to be perfectly level - I did it by myself - but somewhat hitting all 4 clips at the same time and coming down over them as close to the same time as you can. The lip of the shelf has to be down in order for the shelf to slide over top of the interlocking pieces on each pole - that's what holds them together. Will not work with the lip up. I am a 60ish female with no real mechanical abilities so the first one was the hardest because the instructions left out key points. Hope this helps (I have put together about 5 or 6 of them now in my garage).

Product features

Open Shelf Design

Combining a clean, contemporary look with a conveniently adjustable design, the shelving unit offers open-sided, reliable storage space.

Dynamic Use

A useful addition to any kitchen, storage space, or workshop, each shelf can hold up to 350 pounds (total capacity 1750 pounds, evenly distributed).

Height Adjustable Shelves

Fully adjustable, you can move each shelf up or down in 1 inch increments by clipping the black, plastic sleeves around the metal posts.

Additional Features

Featuring a strong steel wire construction, leveling foot caps, and easy no-tool assembly with all necessary components included.

• 🔹Durable Materials & Attractive Appearance: The storage shelf is constructed of a premium steel frame that has excellent rust resistance and oxidation resistance, it has a clean appearance with contemporary good looks that will nicely complement surrounding decor.
• 🔹Steady & Sturdy: Middle supporting beam on each tier holds the MDF board more firmly for extra guarantee; features with rubber feet for added stability and also can avoid causing damage to the ground and floor. The shelving unit offers you a sturdy bearing with a high capacity of up to 386 lb per tier(evenly distributed).
• 🔹Adjustable Height & Versatile Use: The garage shelf levels adjust at every 1.6” increments to fit a variety of items, and it can be built as a shelving unit or horizontal as a workbench.
• 🔹Space-saving: The 5-tier metal storage rack design can enlarge your storage space horizontally and vertically at your places to keep your home neat, tidy, and organized, perfect for use in kitchens, bathrooms, rooms, living rooms, warehouses, offices, industrial, commercial exhibitions, hotels, supermarkets, etc.
• 🔹Boltless Design & Easy Assemble: Boltless design makes it easy to be built and disassemble, no bolt, and no nut required, a rubber mallet recommended for assembly (rubber mallet not included, including a pair of glove). If you are not satisfied with this storage rack, please contact us!

User questions & answers

Question:	I have these shelves but need the rubber leg covers
Answer:	I have the shelves but the covers came with it. You may have to google the manufacturer and check if replacement are available. they don't stay on. I added some glue
Question:	Do the vertical pieces actually attach between two different shelf unit stacks? Can they interlock together the long way to make a deeper shelf
Answer:	Yes, these two shelves can be attached together to make one deeper shelf.
Question:	Can i have just one top shelf on the vertical setup i want to make a industrial vanity
Answer:	If I understand your question correctly, I would say definitely NO. Having multiple shelves attached is what gives the columns their rigidity. With only a single shelf connected the four legs would flap all around and your stuff would be on the ground very quickly.
Question:	I already have several of these shelves, can I buy more adjustable shelving inserts
Answer:	Thanks for your interests in our storage Shelf. Sorry we don't sell parts separately.

• Sturdy and Durable Material: This garage shelves feature anti-rust galvanized steel structure to ensure a long use life. Middle supporting beam on each tier holds the MDF board more firmly for extra steady. One shelf holds up to 386 lbs(evenly distributed and on a level surface)
• Adjustable and Versatile Use: The Shelf levels adjust at every 1.6” increments to fit a variety of items, and you can be build as a shelving unit or horizontal as a workbench.
• Space Saving: The five tiers design can enlarge your storage space horizontally and vertically at your places to keep your home neat, tidy and organized, and to offer ultimate convenience in household organization. It is ideal for kitchen, living room, garage, workshops, warehouse, balcony and office storage use.
• Rubber Feet Skid Resistance: It features with rubber feet for added stability and also can avoid causing damage to the ground and floor.
• Boltless Design for Easy to Assemble: No bolt and no nut design for easily assemble and disassemble, a rubber mallet recommended for assembly (rubber mallet not included, include a pair of glove. Be sure to wear gloves before installation).

User questions & answers

Question:	How do you put it together in the workbench configuration? Are the uprights in 2 pieces
Answer:	Yes the upright are in 2 pieces
Question:	what if I want 1-2 boards for each shelf unit? Can seller provide extra boards for assembling
Answer:	Sorry, we don't sell replacement parts separately.Therefore, we can't provide extra boards for assembling.
Question:	How can I get replacement pieces for this
Answer:	Kindly click the button of the "Ask a questions" on our store homepage and we will get back to you with a satisfying solution.
Question:	What are the dimensions of the unit as shown? L, W, H is given
Answer:	For this item,the dimension (Each Rack) is: 35.4 x 15.7 x 71'' (LxWxH).Hope this can help u.

• Save Space for Your Room: Are you annoyed with too much disorganized stuff in the room? Mounting several floating shelves on the wall can provide that vital extra space. In addition to being a place to store stuff, wall shelves can help show off decorative or precious items to personalize a room. You can store or display photo frames, potted plants, small books and other stuff on them and it doesn't take up space of the room.
• Solid Wood Wall Shelves: Made of paulownia wood, these shelves are sturdy enough to hold your favotite items. Each wood shelf won't add too much burden to the wall but can sustain small items well.
• Classic U Shelves: These black wall shelves won’t steal the limelight from the items you choose to display, but add something unique to your blank wall. The shelves are great for all rooms of the house, including the bedroom, living room, kitchens, bathroom and provide plenty of enclosed space for your books, trinkets and family photos.
• Create Your Own Style: This product comes with three various-sized floating shelves, making the style of the wall more casual and elegant. L: 16.7 x 4.7 x 3.9 in, M: 14 x 4.7 x 3.4 in, S: 9.6 x 4.7 x 2.8 in.
• Unique Gift Choice: These solid shelves must be an ideal gift for displaying collectibles, photos, books, artworks and more.

User questions & answers

Question:	Exactly how many come with the purchase
Answer:	Yes, this can hold a smaller tv
Question:	Can these be hung turned around with the sides pointing down? Or upside-down in this case
Answer:	It DID come with hardware to secure to a well. I do NOT know if it can be attached to other ClosetMaid units.
Question:	how easy is installation? what nails/ hooks should I get
Answer:	Too damn long! Mine was scheduled to deliver on 9/21 and now says 9/3 but also shows it hasn’t even shipped yet.
Question:	Do they come with mounting hardware
Answer:	Yes...I think it could. Dimensions 13.5"w x 30"L x 30"T. Individual compartments are 13.5" square. Hope that helps.

Product description

This standalone shelf is ideal for laundry rooms, garages, basements, pantries, warehouses, or any cluttered home or office space. The sturdy light-weight design features 5 ventilated resin shelves that will never rust, dent, or peel and are chemical-resistant. No tools required assembly allows for a quick and easy set up in any space.

• 150 lb per shelf capacity
• Sturdy feet elevate the shelving unit, helping to prevent mildew, mold, and water damage to items on the lowest shelf
• Can be used indoors or outdoors as the durable resin will not rust, stain, peel, or dent
• Ventilated shelves help prevent mildew

User questions & answers

Question:	Are the shelf heights adjustable
Answer:	No. The posts, when installed between shelves, are 16” long and can’t be adjusted. Note that I received shelving and parts with instructions for Sandusky Cabinets brand. The product description online on Amazon says the posts are 18” high, which may be true, since some of it on each end is inserted into the hole in the shelf.
Question:	I want to put this in a small closet that is 38x22. Shelves are 36x18. Would assembly inside the closet be possible
Answer:	In my opinion, No. You’d probably be fine with the bottom 3 shelves but definitely not the top 2.
Question:	Will it assemble properly without adding the top shelf? Limited to 60" H
Answer:	Yes, just leave off the top shelf & 4 support pillars when you put together.
Question:	How many inches between shelves
Answer:	15 1/2. Inches

Product features

JUGGERNAUT STORAGE PLASTIC SHELVING

This standalone shelf is ideal for laundry rooms, garages, basements, pantries, warehouses, or any cluttered home or office space.

The sturdy light-weight design features 5 ventilated resin shelves that will never rust, dent, or peel and are chemical-resistant.

CREATE EXTRA SPACE

Not only will you be able to organize your tools and accessories, but also will be able to create more space around your home or workstation

DURABLE AND PORTABLE

You will be able to move the plastic shelving four-shelf around your home or garage. This utility shelving is sturdy and compact at the same time.

NO MESS AND CLUTTER

Shelves absolutely essential at home as they help in organizing and keeping a lot of items in a single place, leaving your space free of mess and clutter.

Product description

An Amazon Brand

• 4-shelf shelving unit for your kitchen, office, garage, and more
• Each shelf holds up to 350 pounds (evenly distributed); total max load weight is 1400 pounds
• Wire shelves adjustable in 1-inch increments; no tools required
• Durable steel construction with black-coated chrome finish; adjustable leveling feet
• Product Dimensions: 36 x 14 x 54 inches (LxWxH)

User questions & answers

Question:	Is it hard to put together or take apart
Answer:	Very easy to do both. All you need to take it apart would be to pull off the shelves one by one. I would suggest upside down after removing the top shelf. Then hit lightly with a hammer or mallet from below each shelf to loosen it from the plastic two parts that hold each side of the shelves. Once they are loose they will come apart. When putting it together, the number one thing is to pay attention to the plastic parts because they all say, this side up. You put the side down, you will never get it together. FYI when you unpack the parts a bunch of round black plastic pieces (that look like junk) will fall of, those are ONLY for protecting the posts when shipping so when putting together make sure they are not inside the posts or you will not be able to put it together. The actual parts come in a large bag full of smaller bags, each one is for putting together one shelf. The instructions mention it, but some people are commenting that they are broken pieces because they can't read. lol I'm 70 and I have put together 9, my most recent today. I'm sure you can also. They are sturdy and my older ones have been in use for a decade.
Question:	Does anyone know if there are additional shelves available for purchase
Answer:	Not exactly shure but I did find this: https://www.amazon.com/Honey-Can-Do-SHF350B1436-Shelving-Capacity-14Lx36W/dp/B006Y7A5F8/ref=sr_1_5?crid=346E3HC6296E1&keywords=36x14+wire+shelving&qid=1581975130&s=home-garden&sprefix=36x14%2Cgarden%2C202&sr=1-5 If you need more than one shelf, it's cheaper to buy a whole other unit, use what you need and just ditch the rest or make another tall item storage rack out to it. No need to use the uprights tho if not needed. This racks are kind of addictive...
Question:	Is it possible to turn the shelves around so that the edges of the shelves have a lip
Answer:	People are saying yes, but it is designed for the shelves to have a "top" and a "bottom" so no, you cannot turn the shelves upside down. The weight of the shelve pushes down on the taper, creating a tighter "bind" with the leg. That's the design.
Question:	What is the diameter of the posts
Answer:	I don't know what diameter the other sizes are, but the 30" three tier shelf is only 3/4" diameter. I went off the previous answer when I bought three of these. Boy was I fooled when I received 3/4" poles. Smh!

Product features

Open Shelf Design

Combining a clean, contemporary look with a conveniently adjustable design, the shelving unit offers open-sided, reliable storage space.

Dynamic Use

A useful addition to any kitchen, storage space, or workshop, each shelf can hold up to 350 pounds (total capacity 1400 pounds, evenly distributed).

Height Adjustable Shelves

Fully adjustable, you can move each shelf up or down in 1 inch increments by clipping the black, plastic sleeves around the metal posts.

Additional Features

Featuring a strong steel wire construction, leveling foot caps, and easy no-tool assembly with all necessary components included.

• 【Metal Storage Rack】- The goods racks are built by the galvanized metal frame and durable MDF boards. The metal frame has been powder coated to give it the special look. The 5-tier rack has a load capacity of 330lb per tier (evenly distributed). Overall size：82.8 x 12 x 59 inch (L x W x H), each of shelf size is 27.6 x 12 x 59 inch (L x W x H).
• 【Height Adjustable Shelf】 - The height of each tier is adjustable to meet your different storage needs. There are many positions with the same spacing on the columns. You can snap the boards in for ideal height.
• 【Boltless Design for Easy Assembly & Disassembly】- Due to the boltless design, it is easy to build this metal-frame storage rack. A rubber mallet is recommended for assembly. It can be disassembled to save more space and for convenient transport.
• 【Protective Rubber Pads】- These black goods organizers are equipped with rubber footpads at the bottom of the legs. These pads effectively protect the floor from being scratched. The footpads also add extra stability and avoid the rack sliding accidentally.
• 【Widely Used】- Combining simplicity with practicability, this boltless storage unit is suitable for storing and displaying in many situations, such as in the kitchen, garage, office, supermarket, warehouse, convenience store, etc.

Product features

5 Tiers Boltless Storage Shelf Rivet Rack

Please note:

1. Package includes 3 pack of 5 tier Shelving Unit and they are separated.

2. Pls pay attention to the actual size of the shelves and make sure it fits for what you are looking for before placing the order.

3. We recommended that you use the product in dry and ventilated places, and use cotton clothes to wipe the dirt on the surface.

4. A rubber mallet is recommended for assembly. The rubber mallet is not included. Thanks for your understanding!

MATERIALS

Iron frame with powder coated & MDF Boards

SIZE

Overall Size: 82.8 x 11.8 x 59.1" (WxDxH), each of shelf size is 27.6 x 11.8 x 59.1" (WxDxH).

It has a load capacity of 330lbs per shelf (evenly distributed)

ANTI-RUST

Heavy duty steel frame and has been powder coated to give it the extra special look.

DESIGH

Product has a boltless design, so it does not require any hardware for Slotted construction

ASSEMBLED

The shelves can be assembled as your request as the picture show.

HEIGHT-ADJUSTABLE

The height of each tier is adjustable to meet your different storage needs.

Adjustable shelf levels at every 1.6".

MDF BOARDS

It comes complete with cut-to-size 8mm chipboards.

BOLTLESS DESIGN

Due to the boltless design, it is easy to build this metal-frame storage rack.

STURDY STEEL FRAME

Rubber feet for stability & floor protection.

• Easy one-person installation with all hardware included: Installation Template helps mount holes; Bubble Level helps get perfect horizontal location. (Assembly needed DIY project - Composition of four 1'x3' shelves per tier)
• More Sturdy and Stable: the buckle design with velcros prevents the brackets from falling or bending.
• Heavy gauge steel construction provides safety loading up to 400lbs total.
• High quality screws provided. All hardwares have gone through strict tests.
• Suitable for securing to either wall studs or solid concrete wall.(Does not fit for METAL studs)

User questions & answers

Question:	Is there 1 pack 2 x
Answer:	It’s a two pack.
Question:	How tall are the brackets? Trying to figure out how much room I need below the shelf for them
Answer:	The bracket is 6 1/2 inches tall at the max point below the shelves.
Question:	Do these work for any spacing of studs
Answer:	I am sure the load rating would suffer if you had some strange 30” stud spacing but you can space the brackets as needed
Question:	Just to make sure does this contain two 24"x72" shelves
Answer:	You are basically getting 4x 24"x36" shelves. Grates come in 1'x3' sections. Two grates are used for every two brackets.

Product features

Organize Your Garage Space Perfectly

The FLEXIMOUNTS Wall Shelf is made of heavy gauge cold rolled steel. The low-profile design fit with any decoriting, gives your home more storage space. It comes with all necessary harewares, and have gone through strict tests. Selectable size options available to purchase from Fleximounts: 1'x4'; 1'x6'; 2'x4'; 2'x6'.

• Heavy Duty Construction for Strength and Rigidity 72" H x 48" W x 24" Deep
• Weight capacity up to 4000 lbs distributed evenly over the entire unitWeight capacity up to 4000 lbs distributed evenly over the entire unit
• 5 particle board shelves
• shelves adjust every 1.5" and have a durable black finish
• Holds 800 lbs per shelf or 4000 lbs total

Product description

You can easily store items in your home or garage with the Gracious Living Knect-A-Shelf Heavy-Duty Interlocking Ventilated Storage Shelves. With 5 fixed-height shelves, this shelving unit provides ample space for your storage needs. Each shelving unit connects with other shelf units (sold separately) to create a custom storage system. This storage shelf is ideal for set up in your garage, basement, utility room, laundry room, or anywhere storage is required. Each shelf has a ventilated floor and can support up to 200 pounds. Overall, this shelving unit can hold up to 1,000 pounds. The shelving unit is made from eco-friendly materials and measures 24 inches long, 36 inches wide, and 72 inches tall. Keep your items organized with the Gracious Living Heavy-Duty Interlocking Ventilated Storage Shelves.

• ADDED STORAGE: Store items in your home or garage with this heavy-duty shelving unit
• 5 SHELVES: Features 5 shelves with ample space for storage needs in your garage, basement, utility room, or laundry room; Each shelf has a ventilated floor
• CREATE CUSTOM STORAGE SYSTEM: Connects to other shelf units (sold separately) for added storage
• WEIGHT LIMIT: Holds up to 200 pounds per shelf and up to 1,000 pounds overall
• SIZE: Measures 24 inches long, 36 inches wide, and 72 inches tall

User questions & answers

Question:	can i assemble it to be less than 68 " high
Answer:	Yes, it's plastic.

Product description

Size:35.4 x 23.6 x 70.9in



Specifications:

Color: Matt Black with Coating

Material: 0.73mm Steel+5mm MDF

Overall size: 35.4 x 23.6 x 70.9in (L x W x H)

G. W.: 49.6lb

MDF board size (ea.): 35.2 x 23.4 x 0.2in (L x W x T)

Max. Weight Capacity(each layer): 385.8lb



Please Note:

1. For your safety, please do not stand on the shelf.

2. The max load capacity of each layer is 385.8lb. Please do not put anything overweight on the shelf.

3. To ensure stability, please do not place massive items on the upper layers.







Package included:

1 x 5-tier Shelf

1 x Instruction

• Overall size: 35.4 x 23.6 x 70.9in (L x W x H)
• Durable frame: Due to premium steel, the max weight capacity for each tier is 175kg/386lb (evenly distributed and on a level surface). Middle supporting beam in each tier holds the MDF board more firmly.
• Adjustable heights: This shelf has five tiers. The height of each tier can be adjusted to meet your different needs. The shelves can be adjusted to a small distance to place small items, or remove the divider to form a large space for large items.
• Space saving: The multiple display rack can enlarge your storage space horizontally and vertically, which keeps your places neat, tidy and organized, and also to offer ultimate convenience in household organization.
• Boltless design for the easy assemble: The storage rack is easily built, and all of the necessary mountings and instruction are accompanied. A rubber mallet recommended for assembly (rubber mallet not included; include a pair of glove).

User questions & answers

Question:	Are extra shelves available for purchase
Answer:	From top to bottom.