14 best microwave meters

Product description

Features:

10 MHz to 8.0 GHz frequency range

For isotropic measurements of electromagnetic fields

Non-directional (isotropic ) measurement with three-channel measurement probe

High dynamic range due to three-channel digital results processing.

Configurable alarm threshold and memory function

High frequency (RF) electromagnetic wave field strength measurement.

Mobil phone base station antenna radiation power density measurement

Wireless communication applications (CW,TDMA,GSM,DECT)

Wireless LAN (Wi-Fi) detection, installation

Spy camera,wireless bug finder

Cellular/Cordless phone radiation safety level

Microwave oven leakage detection

Personal living environment EMF safety

RF power measurement for transmitters

Specifications:

Sensor type:Electric field (E)

Frequency range:10MHz to 8.0 GHz

Directional characteristic:Isotropic,3-dimensional

Measurement range (CW signal>50MHz):38mV/m to 11V/m

Absolute error(@1V/m and 50MHz):± 1.0dB

Frequency response (taking into account typ.CAL factor):± 1.0dB (50MHz to 1.9 GHz),±2.4dB(1.9GHz to 35GHz)

Measurement method:Digital,triaxial measurement

Directional characteristic:Isotropic, triaxial

Measurement range selection:One continuous range

Display resolution:0.1mV/m, 0.1 μA/m, 0.1 μW/m²,0.001 μW/cm²

Setting time:Typically 1s ( 0 to 90% of meas. value)

Display refresh rate:Typically 400mS

Display type:LCD 4 digit

Audible alarm:Buzzer

Measurement units:mV/m,V/m , μA/m,mA/m,μW/m² ,mW/m², μW/cm²

Measurement display value: Instantaneous measured value, maximum value or average value since power-on

• The lead time is about 3 business days, FedEx/DHL shipping time to USA is 5-7 days.
• If any questions, please contact us first.

User questions & answers

Question:	how the accuracy of this compare to acoustimeter am-10 or other
Answer:	I would rate this produce as good but not excellent. It detects all rf microwaves with 8 gig range. . A more detailed detection device needed to pinpoint accuracy and direction of source.
Question:	I messed with the calibration # and now I don't remember what the original one, any help
Answer:	Dear Sergio:You do not need the calibration, and precise reading . This excellent meter will answer what the radiation level is. You have to notice just the level, no calibrated measurement is needed, to indicate whether environmental radiation is hazardous for you.Best, Zamir P. Shalita Ph.D.Consultant on electromagnetic hazards
Question:	Why do you ship no original TES 593 ( no certificate ) that does not work properly
Answer:	This is not true. Amazon has our valid proof of reseller status from the legitimate manufacturer of this meter on file. It does come with an inspection certificate and the hard sided case from the maker TES. To the writer of this false comment. We did speak directly on the phone. It appears obvious that you followed through with your verbal threats. Sorry we would not pay for your return shipping costs and that the meter had too many buttons.
Question:	does this equipment generate emf field? The battery seems to have a very short life and the auto power off after only 5 minutes seems a safety limit
Answer:	No

Product description

Q: 【What Are You Worried About? 】

A: You are hesitating that other people are already using it, no matter what the reason is that you see this product. During this time, staying at home, I seem to be very bored, but with this Product, my life has hope. Only sell good quality goods, low prices will only bring inferior products, you may wish to try our Product



Features:

Digital LCD display with backlight, easy for you to read. Portable design, easy carry and convenient and quick for use. Min/Max data display and data hold function. Alarm beeps and red flashing lamp in dangerous zones, excellent reliability and high precision. It can be used to verify any leakage from microwave ovens within a few minutes.

Specification:

Model: HT-M2

Color: Yellow

Calibration: 2450MHz

Measurement Range: 0-9.99mW/cm²

Warning: 5.0mW/cm²

Accuracy: ±1dB

Power Supply: 1 * 9V Battery (NOT Included)

Size: Approx. 170*58*35mm/6.7*2.3*1.4inch

Weight: Approx. 139g/4.9oz



Package List:

1 x Microwave Leakage Detector

1 x Black Bag

• ★Digital LCD display with backlight, easy for you to read. Min/Max data display and data hold function
• ★Portable design, easy carry and convenient and quick for use
• ★Alarm beeps and red flashing lamp in dangerous zones, excellent reliability and high precision
• ★It can be used to verify any leakage from microwave ovens within a few minutes
• ★100% SATISFACTION AFTER-SAFE SERVICE - We are confident in our products and stand behind them 100%. Just reach to us with any questions or concerns and we will be happy to help in less than 24 hours!

Product description

Microwave turntable rotor core, microwave oven internal accessories y-type bracket base PP material, suitable for a variety of brands of microwave replacement Accessories

• Microwave turntable rotor core
• microwave oven internal accessories y-type bracket base PP material
• suitable for a variety of brands of microwave replacement Accessories
• set of 2

Product description

RF Tri- Axis Meter is designed for a reliable measurement and monitoring of Radio- Frequency Electromagnetic Field strength.



Features:

For isotropic measurements of electromagnetic fields

Auto power off (adjustable from 0~99 min) with disable function

Made in Taiwan

Specifications:

• MLCD Display: 4 1/2 digits with maximum reading 19999
• Measuring range: 38mv ~ 11v/m
• Frequency Range : 50MHz ~ 3.5GHz
• Sensor type : Electrical field (E)
• Specified measurement range :
  • CW signal (f>50MHz) : 38mV/m to 11.00V/m, 53.0uA/m to 29.28mA/m 0.1uW/m² 323.3W/m², 0.001uW/cm² ~ 32.33uW/cm²
  • Dynamic range : Typically 75dB
  • Absolute error at 1V/m and 2.45GHz: ± 1.0dB
• Frequency response:
  • Sensor taking into account the typical CAL factor:
    • ±2.4dB (50 MHz to 1.9GHz)
    • ±1.0dB (1.9GHz to 3.5GHz)
  • Isotropy deviation : Typically ±1.0dB (f 2.45GHz)
  • Overload limit : 0.42mW/cm² (11V/m) per axis
  • Overload limit : (0 to 50°C); ±0.2dB
• Measurement units: mV/m , V/m , µA/m , mA/m , µW/m2,mW/m2 , µW/cm2
• Display resolution: 0.1mV/m, 0.1µA/m, 0.001µW/m2, 0.001µW/cm2
• Manual data memory: 200 data sets (read storage)
• Sampling Time: 2.5 times per second
• Alarm function: adjustable threshold with ON/ OFF
• Memory Recall: records Maximum & AVG
• Calibration factor CAL: adjustable
• Operating Temperature : 0 ~ 50°C ( 32 ~122°F )
• Storage temperature : -10 ~ 60°C(14~140°F )
• Relative air humidity : 25% ~ 75%

Set includes

1 x Tri-Axis RF Tester

1 x English User's manual

1 x 9V battery

1 x Carrying bag

Standard Factory Package

• Measuring range: 38mv ~ 11v/m (4 1/2 digits with maximum reading 19999)
• Sensor type : Electrical field (E) / Frequency Range : 50MHz ~ 3.5GHz
• Measurement units: mV/m , V/m , µA/m , mA/m , µW/m2,mW/m2 , µW/cm2
• High dynamic range due to three- channel digital results processing w/ Instantaneous value (maximum and average value measured)
• Non-directional (isotropic) measurement with three- channel measurement sensor (X,Y and Z)

User questions & answers

Question:	Is this made in China
Answer:	Seriously?....it got here via thee slowest boat from China.
Question:	Does this measure cell phone, laptop and microwave radiation
Answer:	Hi, this model T95 can measure the following points:- RF power measurement for transmitters. - High frequency(RF)electromagnetic wave field strength measurement. - Mobile phone base station antenna radiation power density measurement. - Spy camera, wireless bug finder. - Wireless communication (CW, TDMA, GSM, DECT) applications. - Wireless LAN (Wi-Fi) detection, installation. - Cellular /Cordless phone radiation safety level. - Microwave oven leakage detection. - Personal living environment EMF safety.
Question:	I would like to locate signals in the 902 - 928 mhz range with intermittant signals. Will this tracker do that
Answer:	Hi, this meter is designed for measuring the Radio- Frequency Electromagnetic Field strength. Frequency Range is 50MHz ~ 3.5GHz.
Question:	Does this comes with calibration certificate
Answer:	Mine did not. It arrived damaged with the power button pried out of it.

Product description

This meter is designed to measure electromagnetic fields of 2.45 GHZ (microwave frequency) or normal (50MHZ~3.5 GHZ). It is capable of measuring the electromagnetic field radiation intensity that is produced from welding equipment, microwave ovens and other sources of microwave radiation.



Features:

- Ranges: 2.45 GHZ (microwave frequency) or 50MHZ~3.5 GHZ

- RF power density: 0.01~2.700m W/cm2

- Data hold (HOLD)

- Maximum (MAX) Hold

- Minimum (MIN) Hold

- Zero function

- Build in alarm setting

- Low battery indication

- Overload indication



Specifications:

- Display : 3-3/4 digits LCD, maximum reading 3999

- Resolution : 0.001mW/cm2

- Frequency response : 50MHz to 3.5 GHz

- Sensor : Single Axis

- Accuracy : ±2 dB at 2.45 GHz ± 50MHz

- Over load : LCD display "OL"

- Sample rate : 2.5 times per second

- Battery : 9V NEDA 1604, IEC 6F22 or JIS 006P

- Battery life : Approximate 100 hours

- Operating temperature & humidity : 5℃to 40℃,below 80% RH

- Storage temperature & humidity : -10℃to 60℃, below 70%

- Weight : About 170g

- Dimensions : 130(L)*56(W)*38(H) mm

- Accessories : User's manual, 9V battery, carrying case

• Detects Radiation and Leaks from Microwave Ovens and Welding Equipment
• Built in Alarm
• Includes battery and carrying case
• Zero function; Build in alarm setting
• Low battery indication; Overload indication

User questions & answers

Question:	can it be used to read the cellphone radiation
Answer:	I tried it on my phone. There was some activity detected during send and call functions but the reading was very weak. I'm not sure it was very useful and I don't know what a safe reading is on a cell phone.

Product description

Special Notice: this microwave capacitor's terminal pin size is 6.3x0.8mm/0.25x0.03in, Conform before you purchase

Package Content: 1 x High Voltage Microwave Capacitor 1.00uf 2100V

OverView Size:53x33x80 mm/2.1x1.3x3.31in

Connect Pin: 6.35x0.8mm/0.25x0.03in(1/4 in standard terminal)

Item Net Weight: 136 g/ 4.8 Oz

Kindly Remind Following Items:

1.Please shut down your microwave's power supply bofore you replace or repair.

2.Please use electrical meter to conform high voltage capacitor's high voltage is already release completely, pay attention to electrical shock, keep safe first!



From the Manufacturer

LG 0CZZW1H004B Microwave Oven High Voltage Capacitor. 50/60Hz. The manufacturer has replaced this item (part number 0CZZW1H004B) with part number 0CZZW1H004G. For use with the following LG Electronics models: MVH1670ST, LMV1650ST, LMV1630ST, MV1502B, MV1501W, MV1610WW, MV1502W, MV1608BB, MVH1615WW, LMV1630BB, LMV1680BB, MV1604SBQ, MV1608ST, MV1608WW, LMV1650SB, MV1604SB, LMV1650SW, LMV1680ST, MV1604ST, MV1604SW, LMV1630WW, LMV1680WW, MV1610ST, MV1501B, MV1642AY, MV1401W, MV1645AGT, LMV1976ST, MC1043ACSL, MV2048BSP, MV197SJ, MV1648AD, MV1644AQSL, MV174DC, LMV1625B, LMH1017CVST, MV1645AGTL, MV1645AQS, LMV1625W, MV1648EG, MC156SJ, LMH1517CVST, MV1643ASY, MQ1745ATL, MV1843BSY, LMVM1935SBQ, MV1615W, LMVH1750ST, MV1943BS, SCA1001KSS. Refer to your manual to ensure ordering the correct, compatible part.

• ❤ 1、CQC and VDE Certificated, Connect Pin: 6.35x0.8mm/0.25x0.03in(1/4 in Standard Terminal)
• ❤ 2、OverView Size:53x33x80 mm/2.1x1.3x3.31in
• ❤ 3、This 1.00 uF capacitor's connect terminal size is 6.35x0.8mm/0.25x0.03in(1/4 in standard terminal), please check your original pin size before you replacement
• ❤ 4、Completely compatible for GE WB27X10011 and Samsung 2501-001011 DE96-00269A and other same size capacitor for Amana Electrolux Ge Kenmore Whirlpool, directly replace
• ❤ 5、Terminals 2+2,each pole has 2 terminals, Embody one 10M ohm resistance inside high voltage capacitor inside and it will release high voltage during idle or shut down time, ensure safe

User questions & answers

Question:	Will it work on model mco165ub
Answer:	Hello, you need to pay attention to check the capacity size of the connecting pins and capacitors

Product description

Special Notice: this microwave capacitor's terminal pin size is 6.3x0.8mm/0.25x0.03in, Conform before you purchase

Package Content: 1 x High Voltage Microwave Capacitor 1.00uf 2100V

OverView Size:53x33x80 mm/2.1x1.3x3.31in

Connect Pin: 6.35x0.8mm/0.25x0.03in(1/4 in standard terminal)

Item Net Weight: 136 g/ 4.8 Oz

Kindly Remind Following Items:

1.Please shut down your microwave's power supply bofore you replace or repair.

2.Please use electrical meter to conform high voltage capacitor's high voltage is already release completely, pay attention to electrical shock, keep safe first!

• ❤ 1、CQC and VDE Certificated, Connect Pin: 6.35x0.8mm/0.25x0.03in(1/4 in Standard Terminal)
• ❤ 2、OverView Size:53x33x80 mm/2.1x1.3x3.31in
• ❤ 3、This 1.05 uF capacitor's connect terminal size is 6.35x0.8mm/0.25x0.03in(1/4 in standard terminal), please check your original pin size before you replacement
• ❤ 4、Completely compatible for GE WB27X10011 and Samsung 2501-001011 DE96-00269A and other same size capacitor for Amana Electrolux Ge Kenmore Whirlpool, directly replace
• ❤ 5、Terminals 2+2,each pole has 2 terminals, Embody one 10M ohm resistance inside high voltage capacitor inside and it will release high voltage during idle or shut down time, ensure safe

User questions & answers

Question:	Hello
Answer:	yes ，you can contact me.
Question:	what causes the microwave to stop heating
Answer:	Hello, there are many reasons, you need to investigate, thank you.
Question:	Three prong
Answer:	hello ,this is two prong+two prong,thank you.

Product description

Product Description:

The HF-B3G is designed for measuring and monitoring Radio Frequency (RF) electromagnetic field strength, and is capable of measuring the frequency range of 50MHz~3.5GHz.



-RF range: 38mV to 20V/M

-Frequency range: 50MHz to 3.5GHz.

-Sensors:Triple Axis (X,Y,Z)

-Manual data memory (Max & AVG) records

-Calibration factor,Alarm and Clock settings



Applications:

-RF power measurement for transmitters.

-High frequency(RF)electromagnetic wave field strength measurement.

-Mobile phone base station antenna radiation power density measurement

-Spy camera,wireless bug finder

-Wireless communication (CW,TDMA,GSM,DECT) applications

-Wireless LAN (Wi-Fi) detection,installation

-Cellular /Cordless phone radiation safety level

-Microwave oven leakage detection

-Personal living environment EMF safety



Specifications:

*Display type: Liquid-crystal (LCD),4-1/2 digits maximum reading 19999

*Measurement method:Digital,triaxial measurement

*Directional characteristic: Isotropic, triaxial

*Measurement range selection:one continuous range

*Display resolution:0. 1mV/m, 0.1µA/m, 0.001µW/m2, 0.001µW/cm2

*Setting time: typically 1.5s (0 to 90% measurement value.)

*Sample rate:1.5 times per second

*Audible alarm: Buzzer

*Units: mV/m,V/m,µA/m,mA/m,µW/m2, mW/m2,µW/cm2

*Display value: Instantaneous measured value, maximum value,average value, or maximum average value

*Alarm function:adjustable threshold with ON / OFF

*Calibration factor CAL:adjustable

*Manual data memory and read storage:200 data sets

*Battery life:Approximate 15 hours

*Batteries: 9V NEDA 1604, IEC 6F22 or JIS 006P

*Battery included: 9V battery x 1

• Reliable meter for measuring RF and HF Radiation from sources such as Cell Phones, Cell Towers, Smart meters, Wifi modems
• Can be operated by both beginner and advanced users; beginners should measure µW/cm2, while advanced users can use V/m or µW/m2 as their unit of measurement
• For an environment to be considered "safe", your readings should not exceed 0.003 µW/cm2 (or equivalent for a different unit)
• Directional characteristic: Isotropic, triaxial.Measurement range selection: one continuous range.
• Free technical support provided for every purchase; beginner's guide available for download in this listing

User questions & answers

Question:	Why are reading alot higher when held in my hand versus setting on table (ball not touching anything)? also why read higher on Y axis
Answer:	Hello, The reason for higher reading might be that your body serves as an antenna or a reflector of the signal back to the meter. Please ensure that your cell phone turned off when you do the measurements.
Question:	Will this meter measure the frequency from a high voltage power line running in front of our land? Need to know how far to build for it to be safe
Answer:	Hello, The HF-B3G won't measure low frequency EMF. In order to do so we recommend you using the MG-300 or the MG-2000T. https://www.amazon.com/dp/B01CGVBP5O https://www.amazon.com/dp/B01HQBRZ9O
Question:	Does this emit any kind of rf itself? i am highly sensitive to wi-fi radiation. it effects my heart condition. so can't have anything that emits it
Answer:	Hello,The RF Meter is only measure the RF signals. It does not emits RF.
Question:	What kind of battery does this use? Is it internal and rechargeable or do you place the batteries inside and if so, what size / type battery? Thanks
Answer:	I am sorry for the delay in my answer. This device uses regular 9v battery (comes with it). You can use any rechargeable 9v battery. But, before you buy this device, I need to let you know that I find it to be no so accurate. The numbers keep jumping up and down, in high values, making the device useless. It has a way to lock on the max value, but does not show the real time number. I am going to send the supplier an email asking them if this is expected. I used to have an analog one, and it showed some small/ minute variation in readings, but still manageable. I bought this digital device, because I thought I can get a better, accurate reading. This might be more detail than expected, but hope it is useful.

Product description

Features:

Digital LCD display with backlight, easy for you to read.Portable design, easy carry and convenient and quick for use.Min/Max data display and data hold function.Alarm beeps and red flashing lamp in dangerous zones, excellent reliability and high accuracy.It can be used to verify any leakage from microwave ovens within a few minutes.

Specification:

Model: HT‑M2

Color: Yellow

Calibration: 2450MHz

Measurement Range: 0‑9.99mW/cm²

Warning: 5.0mW/cm²

Accuracy: ±1dB

Power Supply: 1 x 9V Battery (NOT Included)

Size: Approx. 13.2 x 5.5 x 3.7cm/5.2 x 2.2 x 1.5inch

Weight: Approx. 139g/4.9oz



Package List:

1 x Microwave Leakage Detector

1 x Black Bag

• 【LCD DISPLAY】The microwave leak detector has a backlight digital LCD display for easy reading. The microwave leak detector has the function of minimum/maximum data display and data retention
• 【HIGH PRECISION】The microwave leak detector has excellent reliability and high precision. The microwave leak detector can be used to verify whether the microwave oven leaks within a few minutes
• 【HAZARD ALERT】The microwave leak detector is safe, convenient and efficient to use. The microwave leak detector emits an alarm beep and a red flashing indicator light in the hazardous area
• 【SAFE TO USE】The microwave leak detector does not need to be calibrated, it can be measured after starting up, which is convenient and practical, and the machine itself does not produce any radiation health hazards
• 【PORTABLE】This is a professional microwave detector with a large LCD screen, small size and light weight. The microwave leak detector is portable, easy to carry, and convenient to use

Product description

This microwave leakage detector can be used to verify any leakage from microwave ovens within a few minutes. 



Specifications:

Calibration: 2450MHz

Measurement Range: 0-9.99mW/cm2

Warning: 5mW/cm2

Accuracy: (+/-)1db

Power Supply: 1 * 9V Battery (NOT Included)

Item Size: 12.5 * 5 * 3cm / 4.92 * 1.97 * 1.18in

Item Weight: 78g / 2.76oz

Package Size: 16 * 8 * 5cm / 6.3 * 3.15 * 1.97in

Package Weight: 137g / 4.85oz



Package List:

1 * Microwave Leakage Detector

1 * Storage Bag

1 * User Manual (English)

• Digital LCD display with backlight, easy for reading.
• Leakage volume in dangerous zones will sound "beeping" and a red fleshing lamp.
• Portable design, convenient and quick for use.
• Never needs re-calibration.
• High sensitivity.

• Production Name: CQC&VDE CH85 Household Microwave High Voltage Capacitor,Module Type: Standard CH85,Withstand Voltage:2100 V 50/60Hz AC, Volume: 1.10 uF,Tolerance:±3%, Connect Pin Size: 4.8x0.5mm/0.19x0.02in(3/16 in standard) NO PCB
• Universal and professional and compatible microwave high voltage capacitor for GE Samsung LG Media Hair Amana Kenmore Mayta microwave, completely replace for GE WB27X10701 high voltage capacitor
• CQC and VDE certificated, executed EN61270-1 standard, ensure safe enough
• Embody one 10M ohm inside capacitor, it will release high voltage through the ressistance and diode on idle time or shut down power, ensure safety.
• More general models, 100% guarantee the original authentic, quality assurance, rest assured that the purchase

• Production Name: CQC CH85 Household Microwave High Voltage Capacitor,Module Type: Standard CH85,Withstand Voltage:2100 V 50/60Hz AC, Volume: 0.95 uF,Tolerance:±3%, Connect Pin Size: 4.8x0.5mm/0.19x0.02in(3/16 in standard) NO PCB
• Universal and professional and compatible microwave high voltage capacitor for GE Samsung LG Media Hair Amana Kenmore Mayta microwave, completely replace for GE WB27X10701 high voltage capacitor
• CQC and VDE certificated, executed EN61270-1 standard, ensure safe enough
• Embody one 10M ohm inside capacitor, it will release high voltage through the ressistance and diode on idle time or shut down power, ensure safety.
• More general models, 100% quality assurance

User questions & answers

Question:	Why are there 4 terminals? mine (ge ge-wb27x10073). can this be used as a replacement
Answer:	Hello, the 4 terminals do not affect your use, you just need to make sure they are enough, thank you.
Question:	Does this capacitor has polarity
Answer:	Hello, no need to distinguish
Question:	Can i use this capacitor instead the .94uf, 2000 wvac
Answer:	yes, you can.
Question:	can this item be used in a juicer
Answer:	Hello, I have not used this product in a juicer. Thank you. If you want to use it in a juicer, please pay attention to the size and voltage of the capacitor in the original juicer. Thank you.

Product description

The LATNEX AF-3500 Multi-Field EMF Meter is a Semi-professional but small and compact device that can measureelectromagnetic field(3-axis), electric field, and RF strength. 

The AF-3500 measures high-frequency electromagnetic fields (RF) in a frequency range of 50MHz - 3.5GHz and low frequency electric and magnetic fields (EMF) at 50-60Hz.

Magnetic field strength is measured in milliGauss (mG) and microTesla (μT) for 3 axis X, Y, and Z.

Electric field strength is measured in volt per meter (V/m).

RF field strength is measured in millivolt per meter (mV/m).

A 2 inch color TFT LCD screen displays the 3 results clearly all at the same time, with also the option to hold the 3 results.

Features:

- 4 digits, 2.4 inches color TFT LCD 

- 3 measurements in one meter: 

Magnetic Field ( 3 - axis ). 

Electric Field. 

RF Strength Field. 

- Data Hold (HOLD) 

- Language Selection (choose your language): English; Traditional Chinese; Simplified Chinese; Japanese; Spanish.

• ✔ RF EMF METER AND DETECTOR ALL IN ONE with Calibration Certificate - Reliable meter for measuring RF and LF Radiation from sources such as Cell Phones, Cell Towers, Smart meters, Wifi modems, High Power Lines, Appliances, Electrical Boxes, and Wires.
• ✔ IMPRESSIVE DESIGN, QUALITY, AND ALARM FUNCTION - Large screen and buttons to toggle between RF, Electrical and Gauss Meter modes and alarm function, which makes it easy to operate by both beginner, senior or elderly people and advanced users
• ✔ FREE TECHNICAL SUPPORT PROVIDED FOR EVERY PURCHASE; Phone and Email support via Amazon Messages and User manual guide available for download in this listing
• ✔ 100% MONEY BACK GUARANTEE 2 YEARS WARRANTY ensures this will quickly become your favorite no-risk purchase. Many people are getting 2 or 3 as a gift for their loved ones. This makes a fine holiday, birthday, anniversary, mother or father’s day gift
• ✔ OUTLINED FEATURES - RF Detector or RF Meter Mode - 50MHz~3.5GHZ; EMF METER or EMF Reader for Electrical Field up to 2000V/M; Gauss EMF Meter 3-axis fields sensor; Manual data memory (Max & AVG) records, Alarm function with ON/ OFF

User questions & answers

Question:	How do I measure radio frequency in hertz or convert V/m to hertz
Answer:	Greetings: Unless I am not "firing on all cylinders," V/m is Volts per (sq.) meter; this is a measure of electrical potential or intensity. The "Hertz" is a measure of cycles per second of an alternating voltage or current. These are two different types of measure, and there is no "conversion" of one to the other. - Paul B. Searles, Retired Master Chief Electronics Tech, US Coast Guard -
Question:	Will i be able to measure emf by setting a desired center frequency and limiting a bandwidth? e.g. cf= 2.5 ghz, bw=24mhz
Answer:	Hello, this meter will measure the amount of EMF or field frequency coming off of the signal. However, you cannot change the desired frequency in settings. This meter will read up to 3.5 GHz. I hope that this helps.
Question:	Specified range of magnetic field strength in mG-- as in 0 -500 or 30 - 1000 mG
Answer:	Hello and thank you for reaching out to us. The range for magnetic readings would be 0.02~2000mG. I hope that this helps.
Question:	can this measure an magnet
Answer:	Magnetic field yes m/f

• High temperature 500 degree E14 bulb 250V 25W, rated average life up to 2000 hours, screw mouth nickel plating treatment (to prevent rust and aging, so that the luminaire will not short circuit)
• A particularly attractive part of halogen lamps is that they make the surface color of an object more vivid. Because the size of the lamp is very small and the variety specifications are complete, there are from narrow to wide a variety of angles to choose from, to professional lighting design to provide a great creative space.
• Name: E14 25W 250V screw Halogen Bulbs, Use Range: oven, toaster, microwave lamp equipment
• Bulb Type: 25W
• Working Voltage: 250V