13 best home depot wire shelving

Product description

An Amazon Brand

• 5-shelf shelving unit for your kitchen, office, garage, and more
• Each shelf holds up to 300lbs with leveling feet, 176lbs with wheels when not in motion, or 132lbs with wheels when in motion (evenly distributed)
• Total max load weight with leveling feet is 1500lbs, with wheels when not in motion is 882lbs, or with wheels when in motion is 660lbs
• Wire shelves adjustable in 1-inch increments
• No tools required
• Durable steel construction with black-coated finish
• 4'' industrial wheels for easy moving, adjustable leveling feet also included
• With leveling feet measures 30x14x60.5inches (LxWxH), with wheels measures 30x14x64.75inches (LxWxH)

User questions & answers

Question:	Can you remove a shelf? Would like to add trash can at the bottom
Answer:	I would place lower shelf all the way to the bottom and set trash can on it then place other shelves where you want. This would keep shelving unit stable. If you need to leave one shelf off keep it and the plastic brackets in case you want to add later.
Question:	Can i buy one additional shelf for the unit i just purchased? it is so sturdy and i would like one more shelf for the very top. thank you
Answer:	Yes, and you can buy a bag of sleeves here for pennies. I have about 10 sets of shelves that I’ve bought here, Walmart, Aldis. The legs are all the same diameter so I’ve been able to interchange shelves to get what I want. The only issue I’ve had is the size of the shelves. Like others have said, check your measurements. If you use the shelf liners do some comparison shopping. Wide difference in price for same thing. I also found a heavy plastic shelf liner roll I can cut to fit. It has tiny parallel ridges that require cleaning with with a nap- like terry- but glasses sitting upside down can breathe so no “bad breath”. Items can be put away still damp as the ridges allow air to move. Love these wire shelves.
Question:	can the 3shelf hold a microwave
Answer:	Only a small microwave. Unit isn't really sturdy enough for larger appliances.
Question:	Are these the industrial size poles that are 1" so I can use shelves I already own
Answer:	The poles we received with the three shelf unit were only 0.75 inches in diameter. The industrial size poles are usually a 1 inch diameter, and are not compatible with the parts we received in this unit.

Product features

Open Shelf Design

Combining a clean, contemporary look with a convenient adjustable design, these shelving units offers open-sided, reliable storage space.

Dynamic Use

A useful addition to any kitchen, storage space, studio, or workshop, each wire shelf can hold up to 73 pounds (evenly distributed).

Height Adjustable Shelves

Fully adjustable, you can move each shelf up or down in 1 inch increments by clipping the black, plastic sleeves around the metal posts.

Additional Features

Featuring a strong steel wire construction, leveling foot caps, removable rolling caster wheels with locking mechanism, and easy no-tool assembly.

Product description

Alera ALE Stackable Posts For Wire Shelving, 36" High, Silver

• Allows you to easily add on shelves or half-height shelf units
• Levelers for uneven floors
• Combine two posts for 72" high shelving

User questions & answers

Question:	Where can I find or does anyone have the manufactures number so that I can get the male to male connector replaced
Answer:	howdy Hermen A.,this is from the alera assembly instructions sheet that came with one of my parts ...product support & parts = 1-800-733-4000hope that helps,lee
Question:	what is the thread diameter at the bottom of the pole for the levelers? Looking to replace levelers with wheels
Answer:	I am not sure what is the thread diameter of the pole I threw my in the trash it is a junk do not buy this.
Question:	What are the diameter of the posts? 1" or
Answer:	Did you ever find 3/4" posts? I've been looking too.
Question:	I have the stackable posts, but i need the double-threaded nipples that attach the posts. do you sell them separately
Answer:	Amazon has the double side threaded connectors on this link: https://www.amazon.com/Diameter-Connectors-Shelving-Replacement-Storage/dp/B07DWN253Q/ref=sr_1_4?ie=UTF8&qid=1529878483&sr=8-4&keywords=shelving+pole+connectors. You can also purchase them (much cheaper) on the Walmart website: https://www.walmart.com/ip/HSS-Pole-Connector-Fits-1-pole-diameter-1-0-mm-pole-thickness-Silver-4-PACK/131498200 and select the pick them up for free in the store option get them in 3 or 4 days.

Product description

An Amazon Brand

• 5-shelf shelving unit for your kitchen, office, garage, and more
• Each shelf holds up to 350 pounds (evenly distributed); total max load weight is 1750 pounds
• Wire shelves adjustable in 1-inch increments; no tools required
• Durable steel construction with black-coated chrome finish; adjustable leveling feet
• Product Dimensions: 36 x 14 x 72 inches (LxWxH)

User questions & answers

Question:	Could you set this up as 2 shorter shelfs side by side
Answer:	You would need to check your rack to see in the poles unscrew in the middle. I get the impression there were different versions of these racks. If they do you need a set of 4 caps, 4 threaded inserts and 4 casters or levelers. Check your pole size too, likely either 1” or 3/4” depending on the version.
Question:	Can you order more shelves? I don't want to buy another unit, I just need more shelves to space them closer
Answer:	Whitmor sells the shelves separately for $12.50. You can call Whitmor, Inc at 888.944.8667 or go online. Whitmor links to Amazon.
Question:	where can i download the assembly instructions
Answer:	super simple assembly. take 2 peices of the black thingies. they should have a mark saying top or a dot or something. they are conical so you snap them together on the legs. start on the near bottom of a leg on a ring and slide the cap till it snaps in place. do all 4 on the same ring, 1 level at a time.so caps, snap, shelf. the 1st shelf is the trickiest but once the second shelf is in place it has better stability. if this is not helping, try youtube.
Question:	I'm very frustrated. the plastic shelf holders are not snapping and staying closed what am i doing wrong
Answer:	I've purchased several of these and just have one more thing to add from the other comments. First, from the other comments you can gather that the pieces do not snap together with each other - they snap to the vertical poles. That's an important point left out of the instructions. Second, where most are saying hold them together and slide them down the vertical pole until they snap, you can do that but they most likely will snap in the same location, giving you same size shelves. The shelves are adjustable, so if you want different heights for each shelf, find the groove on the pole that is closest to giving you the shelf size you want. Then you can, making sure the arrow of the 2 interlocking pieces point up, just lay both pieces close to the groove and then you can slide them up or down to find the closest place to that spot where they will snap. One more thing is you need to make sure you put the shelf over the 4 poles as level as you can. Even though the pieces snap onto the pole, they can be knocked off if the shelf hits them too hard on one side or the other if you try to place it on askew. Doesn't have to be perfectly level - I did it by myself - but somewhat hitting all 4 clips at the same time and coming down over them as close to the same time as you can. The lip of the shelf has to be down in order for the shelf to slide over top of the interlocking pieces on each pole - that's what holds them together. Will not work with the lip up. I am a 60ish female with no real mechanical abilities so the first one was the hardest because the instructions left out key points. Hope this helps (I have put together about 5 or 6 of them now in my garage).

Product features

Open Shelf Design

Combining a clean, contemporary look with a conveniently adjustable design, the shelving unit offers open-sided, reliable storage space.

Dynamic Use

A useful addition to any kitchen, storage space, or workshop, each shelf can hold up to 350 pounds (total capacity 1750 pounds, evenly distributed).

Height Adjustable Shelves

Fully adjustable, you can move each shelf up or down in 1 inch increments by clipping the black, plastic sleeves around the metal posts.

Additional Features

Featuring a strong steel wire construction, leveling foot caps, and easy no-tool assembly with all necessary components included.

Product description

Ideal storage solution for industrial and commercial use. snap-together design assembles in minutes. strong welded wire construction provides exceptional strength and stability. open design allows air circulation and reduces dust build-up. finish on surface prevents corrosion in wet, humid environments. safeguards for freezer, restaurant, food service, indoor/outdoor or other wet/dry storage requirements. rolls with ease on four casters (two locking).

• Ideal storage solution for industrial and commercial use
• Snap-together design assembles in minutes
• Strong welded wire construction provides exceptional strength and stability

User questions & answers

Question:	is this NSF Certified
Answer:	Yes is it! :)
Question:	why is it listed as black when all the pictures show chrome finish
Answer:	Alera products are modular, built from common pieces. Over time I have seen many varieties from many sellers. They have been in three colors: chrome, black, and "anthracite". I did not care about color as long as what I bought was the same color, so mine are anthracite. That turned out to be a clear epoxy coating with about 30 percent of black spatters and streaks over shiny metal that looks like chrome. I think the factory uses that kind of epoxy coating over probably thin chrome plating on everything. The only thing that varies is how much black pigment is in the mix. Don't assume the chrome is bare plated metal; it is probably cheaper to put on thin chrome plating and then the epoxy clear coat. I would trust the written description of your particular ad; the shelving is the same underneath. Though I haven't seen these yet, the Alera shelving could be red, yellow, white, or imitation walnut too. It is all built the same, looks the same, assembles the same, and works the same, except for the epoxy paint color.
Question:	Has anyone had one rust, using it in a garage? Trying to decide on this versus heavy duty resin. Thanks
Answer:	Not at all. I live on the salt marsh in Savannah. I purchased the shelving unit last fall. Assembled it in my garage where it has been since then and there is no sign of rust or any corroding. I love the portability and convenience and especially the price!!! I would recmend it to anyone!
Question:	can I get extra black anthracite shelves 18x
Answer:	I looked around for a while, but it seems that Alera doesn't sell Black Anthracite shelves separately. If you have more than one rack and are needing several additional shelves, consider buying a whole rack (5-shelf or 6-shelf model), neither of which come with the casters. Model#'s ALESW654818BA and ALESW664818BA, respectively.

• Color - Black
• Material - ABS
• Wire shelving shelf lock clips suitable for most 1" post shelvings
• Package Included - 50 Pack Wire Shelving Shelf Lock Clips
• We offer a 12 month Warranty and 45 Days 100% Money Back or Free Exchange Guarantee. Please feel free to contact us at any time.

User questions & answers

Question:	will they fit on NSF brand shelves
Answer:	Just FYI, "NSF" is not a brand of shelving, it's a certification that the shelf supports the stated weight. Think of NSF like UL certification for electronics.
Question:	Will these work with Metro brand wire shelves
Answer:	Yes, so long as the poles are 1 inch in diameter. It worked with my Metro super erecta shelving. The shelf clips I ordered came in a ziplock bags so you can return it if for some reason it doesn't fit. (Dec 2020)
Question:	Ae there 50 pairs or
Answer:	There are 50 clips = 25 pairs . Excellent product.
Question:	Are these made of plastic (like the post-it kind) or paper? I like to reuse them and am wondering how sturdy they are
Answer:	They are plastic and are just like the ones you get when you buy the metal shelving that uses them to hold shelves. They are quite strong as they hold up metal shelves.

Product features

Wire Shelf Clips

Wire Shelf Clips - 50Pack Wire Shelving Shelf Lock Clips for 1" Post Shelvings

Easy Installation

Easy to use, installation and disassembly are very simple, if you have any questions, we will help you

Simple Disassembly

Wide range of applications, suitable for home shelves, shopping malls, supermarkets, schools, exhibitions, exhibition halls

Durable and Strong

Our wire shelf clips made of high quality ABS material,durable and strong without wasting your money

Long Use Life

Long service life, enough quantity allows you to replace it for a long time

Product description

An Amazon Brand

• 4-shelf shelving unit for your kitchen, office, garage, and more
• Each shelf holds up to 350 pounds (evenly distributed); total max load weight is 1400 pounds
• Wire shelves adjustable in 1-inch increments; no tools required
• Durable steel construction with black-coated chrome finish; adjustable leveling feet
• Product Dimensions: 36 x 14 x 54 inches (LxWxH)

User questions & answers

Question:	Is it hard to put together or take apart
Answer:	Very easy to do both. All you need to take it apart would be to pull off the shelves one by one. I would suggest upside down after removing the top shelf. Then hit lightly with a hammer or mallet from below each shelf to loosen it from the plastic two parts that hold each side of the shelves. Once they are loose they will come apart. When putting it together, the number one thing is to pay attention to the plastic parts because they all say, this side up. You put the side down, you will never get it together. FYI when you unpack the parts a bunch of round black plastic pieces (that look like junk) will fall of, those are ONLY for protecting the posts when shipping so when putting together make sure they are not inside the posts or you will not be able to put it together. The actual parts come in a large bag full of smaller bags, each one is for putting together one shelf. The instructions mention it, but some people are commenting that they are broken pieces because they can't read. lol I'm 70 and I have put together 9, my most recent today. I'm sure you can also. They are sturdy and my older ones have been in use for a decade.
Question:	Does anyone know if there are additional shelves available for purchase
Answer:	Not exactly shure but I did find this: https://www.amazon.com/Honey-Can-Do-SHF350B1436-Shelving-Capacity-14Lx36W/dp/B006Y7A5F8/ref=sr_1_5?crid=346E3HC6296E1&keywords=36x14+wire+shelving&qid=1581975130&s=home-garden&sprefix=36x14%2Cgarden%2C202&sr=1-5 If you need more than one shelf, it's cheaper to buy a whole other unit, use what you need and just ditch the rest or make another tall item storage rack out to it. No need to use the uprights tho if not needed. This racks are kind of addictive...
Question:	Is it possible to turn the shelves around so that the edges of the shelves have a lip
Answer:	People are saying yes, but it is designed for the shelves to have a "top" and a "bottom" so no, you cannot turn the shelves upside down. The weight of the shelve pushes down on the taper, creating a tighter "bind" with the leg. That's the design.
Question:	What is the diameter of the posts
Answer:	I don't know what diameter the other sizes are, but the 30" three tier shelf is only 3/4" diameter. I went off the previous answer when I bought three of these. Boy was I fooled when I received 3/4" poles. Smh!

Product features

Open Shelf Design

Combining a clean, contemporary look with a conveniently adjustable design, the shelving unit offers open-sided, reliable storage space.

Dynamic Use

A useful addition to any kitchen, storage space, or workshop, each shelf can hold up to 350 pounds (total capacity 1400 pounds, evenly distributed).

Height Adjustable Shelves

Fully adjustable, you can move each shelf up or down in 1 inch increments by clipping the black, plastic sleeves around the metal posts.

Additional Features

Featuring a strong steel wire construction, leveling foot caps, and easy no-tool assembly with all necessary components included.

Product description

Nexel Wire Shelf ● Chrome Finish ● Shelf measures: 18"W x 48"L ● Capacity: 600 to 800 lbs. (evenly distributed) ● Build your custom wire shelving unit. Nexel offers a wide range of shelves and posts in many sizes and finishes ● Includes 1 shelf and 4 shelf clips ● Nexel's chrome is electroplated nickel chrome resulting in a brilliant high gloss finish. It's a quality finish that is both hard and durable ● Limited One Year Warranty against rust and corrosion ● Open wire truss reinforced shelves feature front to back welded surface ribs for added strength ● Open wire construction maximizes air and light circulation and minimizes dust accumulation ● Shelves easily adjust without tools and align accurately at 1" increments ● Nexel also offers several accessories (baskets, hooks, ledges, casters, etc.) which can be purchased separately and extend the usefulness of your shelving unit ● Photos may not reflect advertised size.

• Single Wire Shelf Dimensions: 18"W x 48"L
• Single Wire Shelf Dimensions: 18"W x 48"L
• The chrome finish is electro-plated nickel-chrome resulting in a brilliant high gloss finish. It is a quality finish that is both hard and durable with a high tech look at an economical price.
• Wire shelves easily adjust without tools and align accurately at 1" increments. Reinforced shelves with welded surface ribs for added strength, 600-800 lb shelf capacity.
• Open design maximizes air and light circulation and minimizes dust accumulation.

User questions & answers

Question:	I need the 42 x 24 inch shelf
Answer:	If you look on Amazon for wire heavy duty shelving you'll see that they come in different sizes so that would be the best way to go just make sure you get the same size
Question:	does this come with th plastic brackets
Answer:	These come with the black shelf clips.
Question:	what kind of pole/post fits into this
Answer:	the post is the standard NSF size, (1 inch in diameter). Perfect fit for my 18"x 24" wire shelf unit. This is the same size post that works on 24" x 48" and 24" x 36" shelving. I too had concerns about the post sizes because the details on post are not really given. Hope this helps
Question:	Can these be hung on the wall or do you have to use it with the legs
Answer:	It must be used with the legs.

Product features

Nexel Wire Shelves

Nexel offers finishes designed to meet the requirements of a wide range of storage environments. Each provides exceptional durability and lasting good looks. Customize your wire shelving units with additional shelves or mix shelves and posts to create a custom unit to maximize storage space. Nexel's wire shelves easily adjust without tools and align accurately at 1" increments. The shelves are reinforced with welded surface ribs for added strength. Open design maximizes air and light circulation and minimizes dust accumulation.

Poly-Green

POLY-GREEN features a true powder-epoxy over zinc-chromate electro-plating that ensures a strong durable finish and handles temperature and moisture extremes well. Ideal for dry storage, coolers and freezers. Includes NEXGard, an anti-microbial agent that protects the epoxy coating from bacteria, mold and mildew that causes stains, odors and product degradation.

Poly-Z-Brite

POLY-Z-BRITE features a true powder-epoxy over zinc-chromate electro-plating that ensures a strong durable finish that resembles the look of chrome, yet handles temperature and moisture extremes even better. Ideal for dry storage, coolers and freezers. Includes NEXGard, an anti-microbial agent that protects the epoxy coating from bacteria, mold and mildew that causes stains, odors and product degradation.

Nexelon

Nexelon finish is made with a proprietary process that bond with the carbon steel, making it rust and corrosion resistant. The NEXGard anti-microbial agent protects it from bacteria, mold and mildew, preventing stains, odors, and product degeneration. It can be used throughout your facility for industrial, commercial, healthcare and medical, and foodservice applications.

Chrome

Chrome is electro-plated nickel-chrome resulting in a brilliant high gloss finish. It is a quality finish that is both hard and durable with a high tech look while still being affordable. This industry standard has proven to be a favorite and perfect for display and dry storage.

Black Epoxy

BLACK EP SERIES finish consists of a black epoxy powder coat over a rust inhibiting undercoat. NSF listed for both wet/dry applications.

Silver Epoxy

SILVER EP SERIES finish consists of a silver epoxy powder coat over a rust inhibiting undercoat. NSF listed for both wet/dry applications.

Stainless Steel

Stainless Steel provides stability and durability with a smooth, attractive, electro polished finish. Stainless Steel handles all moisture and temperature extremes. It resists rust and corrosion and is ideal for any storage requirements.

Product description

An Amazon Brand

• 5 shelf shelving unit for your kitchen, office, garage, and more
• Each shelf holds up to 350 pounds (evenly distributed); total max load weight is 1750 pounds
• Wire shelves adjustable in 1 inch increments; no tools required
• Durable steel construction with chrome finish; adjustable leveling feet
• Durable steel construction with chrome coated finish
• Product Dimensions: 36 x 14 x 72 inches (LxWxH)

User questions & answers

Question:	Could you set this up as 2 shorter shelfs side by side
Answer:	You would need to check your rack to see in the poles unscrew in the middle. I get the impression there were different versions of these racks. If they do you need a set of 4 caps, 4 threaded inserts and 4 casters or levelers. Check your pole size too, likely either 1” or 3/4” depending on the version.
Question:	Can you order more shelves? I don't want to buy another unit, I just need more shelves to space them closer
Answer:	Whitmor sells the shelves separately for $12.50. You can call Whitmor, Inc at 888.944.8667 or go online. Whitmor links to Amazon.
Question:	where can i download the assembly instructions
Answer:	super simple assembly. take 2 peices of the black thingies. they should have a mark saying top or a dot or something. they are conical so you snap them together on the legs. start on the near bottom of a leg on a ring and slide the cap till it snaps in place. do all 4 on the same ring, 1 level at a time.so caps, snap, shelf. the 1st shelf is the trickiest but once the second shelf is in place it has better stability. if this is not helping, try youtube.
Question:	I'm very frustrated. the plastic shelf holders are not snapping and staying closed what am i doing wrong
Answer:	I've purchased several of these and just have one more thing to add from the other comments. First, from the other comments you can gather that the pieces do not snap together with each other - they snap to the vertical poles. That's an important point left out of the instructions. Second, where most are saying hold them together and slide them down the vertical pole until they snap, you can do that but they most likely will snap in the same location, giving you same size shelves. The shelves are adjustable, so if you want different heights for each shelf, find the groove on the pole that is closest to giving you the shelf size you want. Then you can, making sure the arrow of the 2 interlocking pieces point up, just lay both pieces close to the groove and then you can slide them up or down to find the closest place to that spot where they will snap. One more thing is you need to make sure you put the shelf over the 4 poles as level as you can. Even though the pieces snap onto the pole, they can be knocked off if the shelf hits them too hard on one side or the other if you try to place it on askew. Doesn't have to be perfectly level - I did it by myself - but somewhat hitting all 4 clips at the same time and coming down over them as close to the same time as you can. The lip of the shelf has to be down in order for the shelf to slide over top of the interlocking pieces on each pole - that's what holds them together. Will not work with the lip up. I am a 60ish female with no real mechanical abilities so the first one was the hardest because the instructions left out key points. Hope this helps (I have put together about 5 or 6 of them now in my garage).

Product features

Open Shelf Design

Combining a clean, contemporary look with a conveniently adjustable design, the shelving unit offers open-sided, reliable storage space.

Dynamic Use

A useful addition to any kitchen, storage space, or workshop, each shelf can hold up to 350 pounds (total capacity 1750 pounds, evenly distributed).

Height Adjustable Shelves

Fully adjustable, you can move each shelf up or down in 1 inch increments by clipping the black, plastic sleeves around the metal posts.

Additional Features

Featuring a strong steel wire construction, leveling foot caps, and easy no-tool assembly with all necessary components included.

Product description

Description:

Color: Black

Dimension: 36" W x14 D x54 H 

Capacity: 250lbs (per layer), total 1000lbs

Features:

Organize your home, office,kitchen, garage or warehouse with this 4 shelf wire shelving unit. This is a brand new wire shelf. This wire shelf is NSF certified. And the metal rack can be used in residential and commercial environment.

ღ『Sturdy construction』: The wire rack is made of high density steel and coated with prime powder coated. The poles are important parts supporting the whole storage shelves, with a diameter of 19.1mm and a wall thickness of 1mm.  What’s more, metal shelves unit edge adopts triangle design, which is firm and not easily deformed.

ღ『Good packing&warranty』: The metal shelves is packed by a strong mail box. The storage shelves can be well protected even transiting and there is NO deformation on this wire rack. In addition, Payhere wire rack is NSF certified and has guaranteed quality with 5 years warranty. 

☺This wire garage shelving with solid plastic sleeves to support the shelf, protecting the shelf sliding down.

☺Without steel wires edges on the wire rack, you won't be hurt when you touch this wire shelf randomly.

☺The wire shelving is height adjustable, 1 inch increments.Having the wire shelf lips facing down when you assemble the metal shelves.

This wire shelving is a strong and durable metal rack metal shelves metal shelving nsf wire shelving unit shelving rack wire rack shelving metal wire shelving steel wire shelving wire shelving steel wire shelving metal wire shelving storage shelves shelving unit wire rack garage shelving wire shelving wire shelf metal shelves wire shelves shelving rack garage storage rack shelf rack 4shelf wire rack Layer Shelf Steel Wire Shelving Shelves Unit metal rack shelf garage shelving heavy duty storage rack heavy duty Steel Wire rack storage shelf unit

• ❦『FIRM STORAGE SHELVES』: Our heavy duty storage shelves are made of high density carbon steel, chrome plated and painted with high temperature polyester. The new design upgrades the wire rack to meet various storage needs. Each shelf of the metal shelves can hold 250 lbs with feet levelers when weight equally distributed, total 1000 lbs with feet levelers. storage shelves wire rack metal shelves wire shelving unit
• ❦『EXQUISITE-STYLE WIRE RACK』: Perfect size and storage space the metal shelves possesses. This storage shelves will have your extra space of the home, office, kitchen, garage, warehouse etc and be organized with standard size. Big space of this wire rack can storage many stuffs to make sure your home or office or kitchen or garage or warehouse is tidy. The stylish appearance of the wire shelf also adds an artistic touch to the surroundings. storage shelves wire rack metal shelves wire shelf
• ❦『ELEBORATELY DESIGNED GARAGE SHELVING』: The plastic clips used to secure each layer of mesh are in the shape of a round table, small in the top and large in the bottom, so that each mesh can be firmly fixed on the pole of our storage shelves. And the bottom feet of the wire rack have plastic cover so as not to scratch the hardwood floors. The bottom of the pole is designed to facilitate feet levelers mounting. storage shelves wire rack metal shelves metal shelves garage shelving
• ❦『WIRE SHELF WITH EASY INSTALLATION』: The installation of our storage shelves are simple and do not require any tools. According to the installation instructions, the installation of wire rack can be completed within 10 minutes. The body of metal shelves unit is covered with a powder coating that prevents rusting and makes clean easy, also makes it much more artistic and less industrial. Besides, you don't need worry about the paint coming off. storage shelves wire rack metal shelves wire shelf
• ❦『HEIGHT ADJUSTABLE 4-SHELF SHELVING UNIT』: You can adjust the height of the storage shelves according to the size of the item. The spacing of each layer of this wire rack can be adjusted. The adjustable leveling feet allows the garage shelving unit to be placed on uneven ground--a simple twist is all it takes to stabilize. You can use this metal rack in a variety of places, such as the bathroom kitchen garage. storage shelves wire rack metal shelves 4-shelf shelving unit

User questions & answers

Question:	Can I purchase wheels for this
Answer:	I didn’t buy this one, but they are usually universal. You can get them at Lowes. The one I bought comes with wheels.
Question:	Are shelf liners available
Answer:	Shelf liners can be purchased separately
Question:	Does this unit have leveling feet? If yes can they be replaced with wheels
Answer:	It does have screw-in bottom feet which could be adjusted. And you should be able to replace it with wheels. The screw-in diameter is 1/4" according to my measurement.
Question:	Could this hold a 20 gallon aquarium roughly 240lbs on the bottom shelf
Answer:	You could try but I wouldn’t. I have a couple of heavier items on the bottom shelf, it’s starting to bend or now a bit.

Product features

Large Storage

The new design upgrades the wire shelving unit to meet various storage needs. Each shelf of the wire shelf can hold 250 lbs with feet levelers when weight equally distributed, total 1000 lbs with feet levelers.

Heavy Duty Shelves

Our heavy duty storage shelves are made of high quality carbon steel, chrome plated and painted with high temperature polyester. and the triangular edge design that makes it sturdy and fashionable.

Easy Assembly

The assembly of our storage shelves are simple and do not require any tools. According to the installation instructions, the installation of the wire rack can be completed within 15 minutes.

Smooth Edges and Rust Resistant

The shelf is made with great craftsmanship without burrs. Every weld is tested. The coating surface is smooth and easy to clean. Surface coated with chrome and black powder that is not easy to rust in water, and can be wiped with dry cloth.

Firm Clips and Adjustable Shelves

Clips play key role in fixing the shelf. After repeated tests, it can be well stuck on the pole and can adjust the distance between the shelf pieces according to the size of the items. Also, our shelf is NSF certificated.

Sturdy and Durable Poles

The poles of our storage shelves are 19.1mm in diameter and 1 mm thick that can ensure the durable quality. When the articles are evenly distributed, the force on the poles will be even, and the articles will be well loaded.

Adjustable Leveling Feet

The adjustable leveling feet allows the wire shelving unit to be placed on uneven ground--a simple twist is all it takes to stabilize.

Top Cover

The plastic covers on the top of the pole are dustproof and make the shelf look better, using high-quality materials.

Product description

Size: 48" W x18 D x72 H (with stationary feet) 48" W x18 D x76H (with wheels)

Capacity: 800 lbs (Per layer with feet levelers) Total 4800lbs; Total 600lbs with 4" casters

🚀 Delivery Time: 3-5 days

Features:

☀Adjustable Shelves:

Storage shelf’s layer can be set at any height for your individual needs.

❣【Broad Usage】

☺【garage / sheds / basement / industrial warehouse】: Our versatile shelving is perfect for keeping your heavy tools and equipment organised. you can use to organizing your crowded garage and workspace, Keep your garage clutter-free and maximise your floor space with the great range of garage shelving & storage options on offer .

☺【restaurant / kitchen / pantry】: Our NSF storage shelves meet sanitation requirements,they worked great as extra pantry shelving, tools, Hobby storage etc. store cooking equipment, and ingredients.the shelf can holds all of kitchen appliances, large pans, large bowls, can goods, pots/pans, microwave, pizza oven,numerous dishes etc...all on.

☺【laundry room / open loft / storage room】 : Our versatile shelving can minimise clutter throughout your home with our wide range of storage solutions. we have everything you’ll need to optimise space, it can use as your closets to keep your clothes & shoes in better, as a mammoth shoe rack to storage your shoes, to storage of seasonal items or holiday decorations including christmas tree and heavy cans. Our storage products are suit every home.

☺【office / studio / craft room / hydroponic stuff or plant】 :our versatile shelving often use in office to store paper, folders, binding materials and more.  craft room to hold fabric and equipment. pottery studio to use as storage pottery.The shelving is great for plants and manage all  hydroponic stuff.  and be able to do microgreens and seedlings indoors and gardening supplies stored on the shelves.

• 😍【Dimensions-Material-Capacity]:-72”H x 48"W x 18"D（w/wheels）storage shelving made of rustproof and oxidation resistance steel construction, resist dirt buildup and corrosion. Huge capacity hold a ton of stuff and a lot of weight, the per unit weight capacity on feet levelers is 800lbs (no casters), But max entire unit weight capacity is 600lbs on wheels(w/casters) ; 🔔 Note that the limit on the weight it will hold depends on if you are using the casters or not, and it is a big difference.
• 😊【Two "Commerical" Units 】- 6 tier versatile shelf , black wire, extra center rib-There are four casters (two lockable) and 4 stationary legs , this allows you to make one unit configured as 6 tier equally spaced shelves or one unit split into two 3-shelf units. so this unit can be broken into a short stationary shelf with leveler feet and a short mobile rolling shelving unit with casters . you can adjust all the different shelves level and even just use 1/2 the height if you wanted to.
• 😉【Easy to Assemble】- Our shelving unit easy to assemble and you need no tools. you can plan out the spacing and marked on the shelf to make it line up with the marks on the posts to ensure the rack balance. Please attention to the orientation of the black unit clips (thin edge up), sliding shelf down into place where they snap together. But it's helpful to have an extra person, due to the weight and bulk. PS: It's easier to assemble horizontally on the floor and then lifting unit to stand.
• 😘【Heavy Casters Roll Effortlessly】-The strong unit wheels with ball bearing swivels and locking brakes on two wheels. it's easy to lock and unlock, this makes it easy to rearrange and move your shelves even when loaded.when you want to re-organize your garage with the wheels you just roll the shelf so you can clean the floor and walls.If you want to secure the heavy metal NSF wire shelf rack in place, you can lock it. you can using mobile Rack in different areas as time goes by.
• 😎【Our Guarantee】- ➊ We are fast delivery and guarantee that our customers receive our products within 3-5 days. ➋ If item was damaged during transportation, please contact us! we will sent replacement parts free of charge in few days.➌ In order to ensure your pleasant experience, please consider clearly before buying,If you buy wrong or no need, you can cancel order before shipment or refuse to sign when it arrive. If you received then return, we will ask customer pay the part shipping cost.

User questions & answers

Question:	Are the shelves adjustable in 1 inch increments
Answer:	It’s definitely adjustable. I’m not sure if it’s 1”, but if not then it’s very close to that. I liked the option to set the height of each shelf where I wanted.
Question:	Does it come with 1 or 2 units
Answer:	just one unit that has 6 selves, when including top. Very sturdy.
Question:	Are the shelves 18 inches wide or the whole rack with the wheels 18 inches wide? I only 18 inches and so if wheels stick our from edge, won't work
Answer:	wheels are a 360 degree swivel so you can just set them to be straight and they will be 18inches wide in line with the shelves. this is a major quality product that rolls easily when fully loaded. i have been delighted with the six i bought.
Question:	Can you purchase a second set of wheels to use on the other set of shelves? Or do only one set of legs take the wheels
Answer:	Call the make of the shelving unit

Product features

New Shelf Design

The heavy-duty shelving features new upgraded grid layout with additional shelf lines, increased load-bearing capacity of each layer of mesh to 600lbs, and the triangular edge design that makes it sturdy and fashionable.

Heavy Duty Shelves

Our storage shelves are made of high density carbon steel, chrome plated and painted with high temperature polyester. Each shelf of the wire rack can hold 600 lbs with feet levelers when weight equally distributed. The whole metal rack can hold 600 lbs if assembled with 4" caster.

Smooth Edges and Rust Resistant

The shelf is made with great craftsmanship without burrs. Every weld is tested. The coating surface is smooth and easy to clean. The surface of the shelf is coated with black powder that is not easy to rust in water, and can be wiped with dry cloth.

Two Options

Casters can be installed at the bottom of the shelf, as well as fixed leveling feet. So you can switch as needed, just unscrew them.

Convenient Installation

The assembly of our storage shelves are simple and do not require any tools. According to the installation instructions, the installation of the wire rack can be completed within 15 minutes.

Sturdy and Durable Poles

The poles of our storage shelves are 1 inch in diameter and 1.2 mm thick that can ensure the durable quality. When the articles are evenly distributed, the force on the poles will be even, and the articles will be well loaded.

Firm Clips and Adjustable Shelves

Clips play key role in fixing the shelf. After repeated tests, it can be well stuck on the pole and can adjust the distance between the shelf pieces according to the size of the items. Also, our shelf is NSF certificated.

Detachable Shelves

Our shelves are flexible to use. We will give away the extra leveling feet. You can divide the six tier into two small three tier as needed.

Product description

♫-Adjustable Shelves: Get organized with 5-Tier Steel Wire Shelving racks. Store more at home with heavy-duty shelving that’s durable and finished in chrome. Store up to 250 lbs. The adjustable shelves could fit different height of the items. Make this Wire Shelf Unit get the most out of it. ♫-Lot's of Storage Space: ▶Each pipe clip is marked "TOP". Please let the mark be installed up. ▶Storage shelf’s layer can be set at any height for your individual needs. ▶Wire shelving Unit have helped in organizing Bedroom, kitchen, office and so on.   ♫-Excellent Quality: Ⅰ-The steel wire of the storage shelf is very durable, so it can hold a lot of things. Ⅱ-The total weight limit of the whole shelf is 1250 pounds when equally distributed on feet levelers. Ⅲ-Open design offers visibility of stuffs on shelf for easy access. Ⅵ-Easy assembly without tools required; Assembly instructions are included storage shelf metal rack wire shelving unit wire shelves heavy duty 5 tier overall garage rack layer shelf for pantry kitchen black overall organizer unit durable steel wire layer shelf unit multipurpose unit chrome adjustable shed kitchen rack storage rack

• ☀【Large Capacity】: The diameter of the storage rack is 72"x36"x14". The metal frame is large enough to hold a lot of things, the shelving unit is a good helper to keep the space clean and tidy, you can freely adjust the height of each garage rack. Unit rack storage shelf metal wire shelving
• ☀【Easy to Assemble】：The storage shelves structure is very simple ,No tools required to assemble it.The installation takes less than 15 minutes to complete,Shelving Unit Easy to Assemble. Metal shelf unit storage rack wire shelving
• ☀【Extremely Durable】:This storage shelf was made of heavy duty steel and coated with Eco-friendly, metal rack have excellent rust resistance. Weight limit of each wire shelving unit is 250 pounds, and the total weight limit of the whole shelf is 1000 pounds when equally distributed on feet levelers. Storage shelf metal rack wire unit
• ☀【What You Will Got】We guarantee that you will like this metal storage rack. If you are not satisfied with this storage rack, please contact us and we will be happy to give you a 100% refund! If you have any questions, please feel free to ask! Unit rack storage shelf metal wire rack

User questions & answers

Question:	Can additional shelves be purchased for this unit
Answer:	I have no idea, but I doubt it.
Question:	How do I get casters if my shelf didn’t come with them
Answer:	You can contact the seller through Amazon. Let them know and they should send you replacement casters.
Question:	Casters did not come with unit. How do I contact vendor
Answer:	I went to Lowes and bought casters after I contacted the seller. I don't remember how I contacted them, but Lowes is your best bet.
Question:	I would like casters for the 36 x 14 x 72 version which casters work with it
Answer:	I purchased a unit with casters so this info may or may not be helpful. I;ve place wheels on units in the past and they tend to mot be as snug and less safe.

Product description

Organize your home or office with Seville Classics 5-Tier UltraDurable Commercial-Grade NSF-Certified Steel Wire Shelving System. Shelves are constructed from industrial-strength steel and designed with triple-truss supports for superior stability when fully loaded. Unit measures 60 inches wide by 18 inches deep by and 72 inches tall cabinet fully assembled (up to 75 inches high on wheels). Shelves and poles are finished in chrome for protection against corrosion in dry environments, and NSF certified for safe commercial and restaurant use. Systems are built with heavy-duty use in mind and can store up to 800 lbs. per shelf. BONUS 3" rubber casters included with leveling feet for convenient mobility. Assembly is easy and takes only a few minutes with no tools required. UltraDurable commercial-grade steel wire construction for multipurpose storage 5 shelves adjustable at 1" increments Triple-truss shelf design for superior security and stability when loaded NSF Certified - NSF/ANSI Standard 2 - Food Equipment for use in dry environments Chrome plated steel provides necessary corrosion resistance in dry environments Bonus 3" heavy-duty rubber wheels allow for easy positioning, 2 locking Includes 4 adjustable leveling feet with non-slip bottoms No tools required for assembly Limited 10-year Dimensions: 60" W x 18" D x 72" H (75" H with wheels) Capacity on leveling feet: 800 lbs. per shelf Total system capacity on leveling feet: 4, 000 lbs. Total system capacity on wheels: 500 lbs. Weight: 95 lbs.

• Nullify
• Industrial-strength steel wire construction for multipurpose storage
• Chrome plating provides necessary corrosion resistance in dry environments
• Dimensions: 60" W x 18" D x 72" H (75" H with wheels), Weight: 95 lbs.
• Capacity on leveling feet: 600 lbs. per shelf | Total system capacity on leveling feet: 4000 lbs. | Total system capacity on wheels: 500 lbs.
• Includes 5 solid-steel wire shelves with triple-truss support and 4 steel poles for heavy-duty multipurpose storage
• NSF certified for commercial, residential and office environments

Product features

5-Tier UltraDurable Steel Wire Shelving

Store up to 800 lbs per tier. Shelves are constructed of solid steel wire and mount to 1-inch diameter steel poles. Shelves measure 1.5-feet deep and 5-feet wide. Adjust the height of each shelf by 1-inch increments. Wheels are 3" in diameter with 2 that lock for stability.

• Industrial-strength steel wire construction
• Chrome plating provides necessary corrosion resistance in dry environments
• NSF-certified for commercial, residential and office environments
• Includes 4 wheels (with 2 locking) and leveling feet

Plenty of Storage

Store up to 800 lbs. per shelf in systems assembled on leveling feet (4,000 lbs. total). Store up to 500 lbs. evenly distributed across systems assembled with wheels.

Durable Solid Steel Design

The shelves and poles are made of durable steel and plated in chrome for easy cleaning and use in indoor dry environments.

Easy No Tool Assembly

Attach shelves with included clip-on slip-sleeves and add leveling feet or wheels. Easy to build alone or with a friend.

Mobility Optional

Easy to install leveling feet with bonus casters for added mobility.

NSF/ANSI 2 - Food Equipment Certified

Our shelving is listed by the NSF as certified to the NSF/ANSI 2 - Food Equipment Standard for use in dry and heated storage environments only. Learn more by visiting info.nsf.org and searching their certified products & systems for Seville Classics.

10-Year Manufacturer's Coverage

Seville Classics covers its shelving for up to 10 years against material and manufacturing defects with proof of purchase.

Product description

• Standing five-shelf unit with a 16-gauge steel rack and shelves made of particle board to support an 1800-lb. per shelf capacity
• Double-riveted beams lock into double-rivet holes on corner post for structural security
• Corner post rivet holes are punched at 1-1/2" intervals for precise adjustment to shelf height
• Two-piece post design for vertical assembly of a single 72" high unit, or for horizontal assembly of two 36" high units
• Rivet lock design for boltless assembly, instructions included, rubber mallet recommended for assembly (sold separately)

User questions & answers

Question:	How much does it weigh? Are there any casters available for purchase that fit this item
Answer:	I don't think there are casters available. It is pretty movable and light when empty. It does take 2 people to put it together. I am 5'4" and 110 and put it together and moved it around with help from another person my size. (You'll need a mallet). I hope this helps!
Question:	What is the depth of the unit? The item title says 24” but the description says
Answer:	Depth is 24 inches. Width is 36 inches.
Question:	Is it made in 2 pieces can I have 2 3feet tall Shelf
Answer:	Yes but one will only have two shelves bottom and top, the shelves connecting are the support so you have to have one at top and bottom. Or at least very close to top and bottom. That only leaves you with one extra shelf to put on one of the 3 foot sections.
Question:	What is the beam to beam width? Im trying to figure out what width totes to buy that will fit
Answer:	Thank you for contacting us. The width is 36". Please reach out if you have any other questions.