13 best home depot fuses

Product description

5136ANL Fuse400AIgnition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boats Silver-plated connector blades for corrosion resistance Visible indication of blown condition 6,000 Ampere Interrupt Capacity (AIC) satisfies ABYC requirements for main DC circuit protection on large battery banks For use with Blue Sea Systems' ANL Fuse Blocks

• Blue Sea Systems 5136 Fuse Anl 400 Amp-
• Blue Sea Systems
• Tools & Home Improvement, Electrical, Breakers, Load Centers & Fuses, Fuses, Blade Fuses

Product description

Pack of 5, T1.25AL125V, T1.25A 125V, T1.25L125V Cartridge Glass Fuses 5X20mm (3/16 inch X 3/4 inch), 1.25A 125V/250V, Slow Blow (Time Delay)

User questions & answers

Question:	These fuses fits home decorators collection windward iv 52” (home depot) 1.25al 125v fuse
Answer:	Yes!!!
Question:	Is dis fuse type good 4 a Definitive Technology subwoofer? Recent order from Amazon didn't work properly as when power was turned on, fuse blew off
Answer:	250 V was specified & supplier provided correctly. Inspected the original fuse, w/c served more than 9 years, & it was labeled 125 V instead to my surprise. So Def Tech erred on the stated spec. Thanks DevonB 4d suggestion!

• BOJACK High Quality Fast-blow Glass Fuse Assortment Kit
• Fuse Dimension:5x20mm/0.2x0.78Inch&6x30mm/0.24x1.18Inch
• Fuse Voltage: 250V
• Fuse Model:6x30mm/10 type-1A/2A/3A/5A/6A/7A/8A/10A/15A/20A,5x20mm/5 type-1A/5A/10A/15A/20A
• Package Quantity: 200pcs (6x30mm Each model 10pcs,5x20mm Each model 20pcs), Packed in A plastic storage case.

User questions & answers

Question:	whats the diffrence between slow blow and fast blow fuses
Answer:	Slow fuses take a last little longer to blow when a heavy current load is placed over the circuit for a short period of time- like starting a motor - if the voltage is too much for too long, it will blow. Fast fuses are used for most common applications in electronics to protect the equipment etc...

Product description

0.5A/500V fuse for use with Fieldpiece LT83/LT83A/LT17 multimeters. Pack of 4

• RFM74

User questions & answers

Question:	Will this work in ideal 61-342 digital multimeter
Answer:	Not 100% they have a tech support line on their site that can answer that.

Product description

Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission critical status in manufacturing and service industries. From industrial electronic installation, maintenance and service, to precision measurement and quality control, Fluke tools help keep business and industry around the globe up and running. As electrical systems grow more and more complex, spikes, transients, surges, and sudden over voltage events become more common. These can trigger a sequence of events that may lead to serious injury. This is why test equipment must be designed to protect people who work in this high-voltage high-current environment. Fluke digital multimeters have been designed to meet the new IEC-1010 standards. More importantly, they have been approved by CSA as actually making these standards, which means they are designed to protect you against transients in three-phase distribution systems. Now you can stock up on Fluke 871173 630 mA 250-volt replacement fuses for Fluke digital multimeters. This cartridge fuse has a fast acting blow characteristic, a current rating of 630 mA, and a 250-volt rating. The Fluke 871173 630 mA 250-volt replacement fuses come in a package of five, and are not covered by a warranty..

• Voltage Rating, VAC:250V
• Cartridge Fuse
• Fuse Current:630mA
• Blow Characteristic:Fast Acting
• Fuse Size Metric: 5 x 20mm

User questions & answers

Question:	I have a Fluke 77, is this the proper fuse
Answer:	Absolutely! I’ve installed one in my Fluke 77 - this is the correct fuse!
Question:	Does anyone know the NSN for this product
Answer:	no I don;t
Question:	can i buy just one fuse? for less
Answer:	no
Question:	Does this fit Fluke
Answer:	it fit my fluke 78, but i'm not sure about the 87. I think it will work, but not sure

Product description

Bussmann 60 amps 250 volts Fiberglass Dual Element Time Delay Fuse 2 pk

• Cooper Bussmann

Product description

2 Pack, 45A, Type FRN-R Cartridge Fuse, Fusetron Time Delay, 250V, Dimensions: 2.375"L x 1.375"W x 0.50"H, Carded.

From the Manufacturer

Heavy duty time-delay fuse used in motor protection. When sized correctly, it helps protect motors from burnout caused by overloads or single-phasing. The time-delay feature allows the initial startup current surge for typical motors to pass, but opens prior to motor burnout when longer, dangerous overloads are present. In addition, the dual-element design opens in as little as 0.004 second if the fuse experiences short-circuit conditions. UL Listed Class R (IR: 200kA). Groove in end cap or notch in knife blade permit the fuse to be used in Class H, Class K or Class R fuse blocks. Cartridge fuses are used to protect motors and branch circuits where higher amps or volt ratings are required. They are available in a wide variety of sizes, amp and volt ratings up to 600Vac and 600 amps. Cartridge fuses are used extensively in commercial, industrial and agricultural applications as well as residential fuse panels, air conditioning, pumps, appliances and other equipment. Cartridge fuses are available in two types. General Purpose fuses have no time-delay and protect fuse panels, appliances and branch circuits. Heavy- Duty fuses have a time-delay feature, allowing momentary motor startups. Both are available in 250Vac and 600Vac versions with catalog symbol and amp rating stamped on the knife blade or end cap.

• Quantity: 2 Pack
• 45A Type FRN-R Cartridge Fuse
• Fusetron Time Delay, 250V
• Provides motor overload, ground fault and short-circuit protection
• Helps protect motors against burnout from overloads and from single phasing on three phase systems
• Simplifies and improves blackout prevention (selective coordination)
• Can be applied in circuits subject to temporary motor overloads and surge currents to provide high performance short-circuit and overload protection
• Protects against low level overcurrent of overloads and will hold on inrush current 5 times greater than the amp rating of fuse for a min of 8 sec

User questions & answers

Question:	What is the dimension of each unit? I am replacing a 3 inch long fuse. In the product description, the dimension is listed as 6x3x1 inches
Answer:	Use an exact replacement for your fuse. The model number determines the size.

Product features

Bussmann Series by Eaton

It’s been more than 100 years since the Bussmann brothers first started producing fuses from the basement of their home. And in that time span, Bussmann has grown from providing fuses for horseless carriages and World War II aircraft, to offering more than 30,000 products.

From humble beginnings in St. Louis, Missouri, to a global product and distribution network, the Bussmann name is synonymous with technological innovation. Today, Bussmann products continue to reflect a long-standing tradition of providing fusible circuit protection and electrical safety solutions that help protect equipment and enable reliable, efficient power distribution. And now that Bussmann products are part of Eaton, two of the industry's top innovators have united to provide ultimate circuit protection.

Automotive Products and Accessories

With a wide range of circuit protection offerings, from blade fuses to glass fuses, fuse blocks to relays, and so much more, for Domestic, Asian, and European Cars, Trucks, Suvs, Vans, Commercial and Farm equipment, Bussmann has the solution you need.

Marine and Off-Road Products

Marine, RV, and Off-road vehicles present different challenges for circuit protection that Bussmann meets head on. Rugged products suitable for a wide range of environmental conditions, including marine rated components are just some of the solutions available.

Hardware and Home Products

Bussmann's full line of home circuit protection products reflects a long tradition of creating solutions that enhance electrical safety, reliability, code compliance and efficient power distribution in household and commercial environments.

Product features

Automotive Wiring and Electrical Systems is the perfect book to unshroud the mysteries of automotive electrics and electronic systems. The basics of electrical principles, including voltage, amperage, resistance, and Ohm's law, are revealed in clear and concise detail so the enthusiast understands what these mean in the construction and repair of automotive electrical circuits. All the tools and the proper equipment required for automotive electrical tasks are covered. In addition, this in-depth guide explains how to perform more complex tasks, such as adding new circuits, installing aftermarket electronics, repairing existing circuits, and troubleshooting. It also explains how to complete popular wiring projects, such as adding late-model electronic accessories and convenience items to earlier-model cars, installing relay systems, designing and assembling multi-function circuits and harnesses, and much more.

Installing an aftermarket tachometer is a common upgrade for many vehicles. You will be shown how to wire it into the ignition system, install the ground wire, and make professional connections. This book will show you how to professionally install a wide range of accessories, including stereo equipment.

All the electrical tools you will need are covered in this book, including the Digital Multi Meter (DMM). Shown here is the Radio Shack DMM, which combines the range and selector switch into a single control. This makes the meter far less versatile than more expensive models like the Fluke 87, but it can be owned for a fraction of the cost.

Quality connections are essential in all electrical work. All types of connections and how to make them are covered here, including crimping with non-insulated and insulated connectors, crimping with a hexagonal compound crimping tool, crimping with a hammer crimp tool and soldering every type of connection important in any automotive application, including soldering terminals and soldering into pre-existing circuits.

Finally, after mastering the basics, we get to a complete chapter on troubleshooting, followed by advance installation and interfaces and even the building of your own custom wiring harness. The use of relays is extensively covered, with easy to read schematics and step by step instruction. Automotive Wiring and Electrical Systems is the perfect book for wiring a hot rod from scratch, modifying muscle car electrical circuits for cooling fans and/or power windows, or adding a big stereo and other conveniences to modern performance cars.