11 best plate hanger for 19 plate

Product description

Super white plate hanger is for hanging 19-24" plates, platters, tiles, etc. The wire is coated with PVC to protect the edges and rims of plates. Suggested weight is up to 6.25 lbs.

• Fits 19" - 24" plates, platters, tiles
• PVC wire covering prevents scratches on decorated rims and edges
• Flexible wire easily conforms to your plate
• Lacquered springs resist tarnishing
• Holds up to 6.25 lbs.

User questions & answers

Question:	Where is the normal hanging point for these holders? I do not see an obvious places in the photo
Answer:	i'm sorry we don't provide personalised engravement

Product description

Brass finish plate wires accomodating 15-30-inch plates.

• High grade steel springs
• Comes with clear coated tips
• Easy fit with hook and nail included with wires
• Suggested weight-5 lbs.

User questions & answers

Question:	How many does this come with
Answer:	The example shown says that the bracket starts at 15" and stretches to 30"; the brackets themselves are probably about 6-7 inches in length and about 2 inches apart.
Question:	What are the dimensions of the wire brackets? Looking for width and height
Answer:	I'm not sure. I used it to hang a 27" diameter lightweight (much less than 1 pound) metal tray on the wall, and it works fine. But I cannot predict how it would work with the bowl you describe - I'm afraid the 4 hooks might be too small to securely hold the 1/2" lip of the bowl. Also, I'm not sure this plate wire would bear the weight of a 10-pound item. Given the low cost - less than $9.00 - it might be worth a try, if you can find a safe way to test whether it will securely hold your bowl and bear the weight. Sorry I can't give a more definitive answer. Maybe try to send the question directly to the seller?
Question:	Would this work on a wood bowl that is 20” dia x 7” deep weighing 10 lbs? The lip of the bowl is about
Answer:	There are two long rods seen in this apparatus (rod on top and rod on bottom). On one of them, there is a notch (slightly bent upwards) in the middle that is the primary place to hang it. Hint: Also, for me, I found that the apparatus wasn't quite tight enough around the object to be hung, i cut the springs shorter (with tin snips) and it worked great to help better secure the platter that I was hanging. Might not be an issue for you.

Product description

Condition: 100% Brand New

Specification: With 19 rings

Total Length: Approx. 480 cm

Package List:1 x Camping Hanging Rope+8 x Buckles+4x Wire Clamp

Product Size (can be adjusted freely):

Material: Polyester + Aluminum Alloy + Stainless Steel

Color: As Pictures Shown

Width: Approx. 25 mm/1.0 in

Item Type: Camping Hanging Rope

Feature:

1. Made of high quality polyester material, reinforced suture, durable, light weight and easy to carry.

2. Easy for hanging camping gear. The durable lanyard has 19 tightly stitched loops, each loop can hold up to 60 pounds, and the rope can hold up to 150 pounds.

3. Use it as a clothesline and load it with wet swimsuits, towels, life jackets, etc. They'll dry quickly and, by hanging the gear up high, make it easy to tidy up the camping ground.

4. Great for camping, hiking, backpacking, travel, emergency survival and any other activity.

5. Multipurpose, it is also suitable for gardens, garages, sheds, barns, hanging items and keeping your space neat, everything is easy to find.

6. Simple installation system for vertical and horizontal usage. Wrap the two ends around each tree and then use a convenient buckle to fasten. Adjust tension and length as needed. Alternatively, wrap the ends of the rope around the upper and bottom of a tree so that it hangs down for vertical storage.

Note:

1. Please allow 13cm error due to manual measurement. Thanks for your understanding.

2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

• MATERIAL: Polyester + Aluminum Alloy + Stainless Steel. Made of high quality polyester material, reinforced suture, durable, light weight and easy to carry.
• EASY for hanging camping gear. The durable lanyard has 19 tightly stitched loops, each loop can hold up to 60 pounds, and the rope can hold up to 150 pounds.
• USE it as a clothesline and load it with wet swimsuits, towels, life jackets, etc. They'll dry quickly and, by hanging the gear up high, make it easy to tidy up the camping ground.Great for camping, hiking, backpacking, travel, emergency survival and any other activity.
• MULTIPURPOSE, it is also suitable for gardens, garages, sheds, barns, hanging items and keeping your space neat, everything is easy to find.
• SIMPLE installation system for vertical and horizontal usage. Wrap the two ends around each tree and then use a convenient buckle to fasten. Adjust tension and length as needed. Alternatively, wrap the ends of the rope around the upper and bottom of a tree so that it hangs down for vertical storage.

Product description

Tripar 14-20-Inch Brass Plate Wire

• High grade steel springs
• Comes with clear coated time
• Easy fit with hook and nail included with wires
• Suggested weight-2-pound

User questions & answers

Question:	Will these work for a 8 x 16 plate does it include hanging hardware
Answer:	If you are planning to hang the plate along 16", then this will work. The weight limit is 2 lbs
Question:	Will this holder fit a oval platter - dimensions 16"x11.75"x1.25"h. thank u in advise
Answer:	I would never trust any spring not to lose some tension over time, especially if your plate is weighty. That said, there's an easy fix -- once the hanger is in place on the plate, use either zip ties or picture hanging wire to fasten both sides of the solid pieces, top to bottom. You can do this in an X shape, or straight (right beside the springs). Then you can hang it with peace of mind!
Question:	I have a very expensive art plate 20” in diameter I would like to hang. Can I trust this hanger to hold it
Answer:	It wouldn't fit a thick rim. The partition between the hooks is very thin, just the right size to hold a plate. The brass looks to me like it would be hard to bend (re-shape to suit your need). I'm not sure it would do that, and if it did, there wouldn't be much guarantee that your wooden disk would be secure. I recommend looking for another product.
Question:	Will this hanger fit over a wooden disk with a thick rim
Answer:	It includes 1 plate wire. Thank you.

Product description

Super white plate hanger is for hanging 15-20" plates, platters, tiles, etc. The wire is coated with PVC to protect the edges and rims of plates. Suggested weight limit is 4.5 lbs.

• Fits 15" - 20" plates, platters, tiles
• PVC wire covering prevents scratches on decorated rims and edges
• Flexible wire easily conforms to your plate
• Lacquered springs resist tarnishing
• Suggested weight limit is 4.5 lbs.

User questions & answers

Question:	What am i doing wrong? i attached hanger to plate but when i went to hang it on the wall the springs expanded and i almost broke my plate
Answer:	Frame is 14" unstretched, max recommended weight 2lbs., so probably not a good fit for a smaller, heavier tile. There are smaller hangers that one could double up or do across different sides but weight is an issue.
Question:	Can this be used to hold a tiled rectangular 10X12 mirror that is about 7 lbs
Answer:	I ended up throwing this item away. It is too flimsy.
Question:	Would this work for hanging ceiling tile art on the wall
Answer:	My hanger is holding up a blown glass concave plate that is 19" in diameter. It probably weighs about 3 - 3.5 lbs. and It's secure. We have a substantial molly in the wall with a metal hook that the hanger is attached to so there is about a .5 inch distance from the wall that the plate hangs on. That distance will depend on the size of the hook or hanging apparatus that you use.
Question:	I have a leaded glass panel that is 16w x 17.5h weight 3.5lbs will this item fit it and hold it
Answer:	It depends on which way you are planning to hang the plate. If you are planning to hang the plate along 16", then this will work. And yes, it comes with the hardware as I remember.

Product description

Ideal for displaying decorative plates, framed artwork, photos and other collectibles, the Horizontal 1-Tier Plate Rack will add the perfect finishing touch to any room in your home. Made of sturdy steel. To clean wipe with a damp cloth and towel dry. Measures 2.5"L x 6.75"W x 3.25"H.



Spectrum products incorporate original designs created by and for the exclusive use of Spectrum. Most of Spectrum’s products are protected by intellectual property rights including issued design patents and pending design patent applications. Protection for certain products may be provided and/or augmented by other federal and state proprietary rights including trademark, trade dress and copyright rights in the appearance and design of the products.

• Functional and stylish way to display plates, artwork, photos and collectibles
• Decorative piece of wall art or for mantels, bookshelves and tables
• Sturdy steel construction
• 2.5"L x 6.75"W x 3.25"H

User questions & answers

Question:	Can I store multiple plates on one? I am looking for something to store my 6 kitchen plates
Answer:	Greetings! Normally we suggest customers to measure their waist first then compare with our belt size. Please check our suggested waist sizes before your place your order to find yourself a right one. Thank you!
Question:	What is the spacing (left to right) between the rods that the plate sits on? NOT the space between front and back. Thank you
Answer:	The buckle is not removable.
Question:	How much weight can this hold? How wide in the opening? I want to use it for a wedding album
Answer:	Dear Customer,We are so sorry that the buckle of our belt can't be changed, but as you see, our belt is very cool with the high quality metal buckle, I think if you see it you will like it.
Question:	What are the measurements of this hanger
Answer:	It’s used for cutting the belt and adding new holes if necessary.

Product features

Spectrum Diversified Horizontal Plate Rack, Black

Description:

Ideal for displaying decorative plates, framed artwork, photos and other collectibles, the Horizontal 1-Tier Plate Rack will add the perfect finishing touch to any room in your home. Made of sturdy steel.

Product description

Safely display heirlooms with this plate hanger. Adjustable brass-plated wire hangers securely hold plates, platters, bowls and trays.

• Fits 16-inch-30-inch platters and trays
• Non-scratch vinyl sheathed hooks

User questions & answers

Question:	What weight can this hold? i have a platter oval made with ceramic: dimensions: 16" x 11 .75" x 1.25 h. smooth rim somewhat flat. thank u pre-advised
Answer:	Measure the short side and buy the hangers with the higher number that's closest to the short side length of you plates... i.e if you plates are 7" x 10" you should buy the 4" to 7" plate hanger. The snugger the fit...the more secure your plate(s) will be. Hope that helps! Joe @ Readsome
Question:	i have a set of 8 oval plates that need to be mounted oblong being short up and down and long horazonlal
Answer:	Barbara -- To work, I think you'll need to consider to points: thickness of the frame, and shape of the heart. If the frame is very thin (less than 1/2" thick) then that should be fine, but I don't think the prongs that hold the plate would be able to get a good grip on anything much thicker than that. If the bottom of the heart is "fat" (tapers very quickly at the point, like this --> http://www.polyvore.com/cgi/img-thing?.out=jpg&size=l&tid=26705843 ), then that should be fine however, if the heart is elongated (like this --> http://woodencraftedgifts-supplies.weebly.com/uploads/1/0/6/4/10641641/135971_orig.jpg ), the prongs on the bottom could slip very easily and allow the frame to fall.
Question:	Will this hold a 14 inch heart shaped frame
Answer:	My plate was thick pewter/metal, appproximately 12 inches and pretty damn heavy. This thing is pretty damn tough and sturdy
Question:	how much weight does it hold
Answer:	I don't know. A'sk the manufacturer. It was totally too weak for the large plate I had to hang. I ended up using a large wrought iron plate stand instead.

Product description

The Large adjustable Display Buddie can hang plates, platters, bowls, trays, baskets, toys, ceramic art, and any other object which need 6 points of secure hold and is approximately 14"-22" in diameter and up to 10 lbs. in weight.-----Using a Large adjustable Display Buddie is so easy! Slip the curved hook ends of each arm over the edge of the object you want to hang and pull the two cord ends apart to snug Display Buddie to your object which also automatically locks the cord lock. If you need to make an adjustment you simply push the cord lock button with your finger to release it, adjust the Display Buddie armature on your object, and pull the cord ends apart again to snug and lock Display Buddie.-----When you are ready to hang your object just line up the middle of the "W" of one of the armatures (which is a natural hook), and hang on the nail or picture hook you've already nailed into the wall.-----We also offer Small, Medium and X-L Display Buddies for objects of various sizes.-----If you are not happy with the performance of this product we offer a 100% money back guarantee.

• Universal design: whether left or right handed and any age can easily use Display Buddie
• Hold your object safely with plastic-coated arms and hooks, which don't scratch objects and won't pinch your fingers when used.
• Hang different sized and shaped objects "invisibly", up to 10 lbs.
• Re-useable on same object or new object
• Inexpensive way to decorate your walls!

User questions & answers

Question:	Is this suitable for a 11 3/4" diameter glass plate? It seems every review or question is regarding larger, heavier plates
Answer:	Hi Nancy, The Large Display Buddie works best on bowls 2-3" deep and up to 20" diameter. I will be posting an Extra Large Display Buddie which will work for your size bowl at the end of April, if you want to check back then
Question:	I have a bowl that is 4” deep and 21” diameter. Will this work to hang it
Answer:	Yes, it works just as well outside as inside.
Question:	Is this suitable for use outside
Answer:	There are 4 sizes of Display Buddie which hang different sized objetcs: Small, Medium, Large & X- The X-L size is for larger oval or rectangular objects, so that is the size you will want for your platter. The cord is a nylon composite cord which works very well with the cord lock.
Question:	I have a platter 20 1/4" long × 14 " high. Will this work? And is white string cotton
Answer:	I don’t know the weight limit

• Safely display cherished heirlooms on your wall with this plate hanger. Adjustable brass-plated wire hangers securely hold plates, platters, bowls and trays.
• Fits 10-inch-16-inch platters and trays- suitable for large plates
• Non-scratch vinyl sheathed hooks
• Brass hangers add a polished and eye catching finish to your display

User questions & answers

Question:	only for decorative plates or could they be used for plates and platters that are used occasionally? Take off from hanger and replace easily and safe
Answer:	Always use the platter hanger that barely fits the maximum size of your plate or platter. In this case, the 10-16 would be a better choice than the 16-30. The 16-30 would allow your heavy platter to sag and possibly fall. In any case, purchase your item from Readsome Home for complete satisfaction. -Thanks!
Question:	I have a 3.5 lb. platter that measures 15 1/2 inches in the back. Not sure if I should order the 10 to 16 or the
Answer:	It certainly could handle the weight but I'm concerned with the bowl shape. All I can say is try it and if not, send it back. It is a big hanger but it's usually for large flat pieces. I'm sorry I couldn't be of more help.
Question:	Can this be used to hang a bowl 3" deep and 16" in diameter with a weight of 6 pounds
Answer:	I think it will. I have 3 bowls hung on my wall with these that are at least the same dimensions if not a bit bigger. Though I don't know how much each of my bowls weigh, I still think these will work for you they are quite sturdy!
Question:	Will this hanger hold a shallow bowl that is 12 inches in diameter and 3 inches deep? The bowl weighs about .3 pounds
Answer:	mine was brass
Question:	The description says clear but it looks brass, which is it? How much weight will this hold
Answer:	The one I ordered would be too large for an 8 “ plate I am using mine for a 19 1/2 inch round metal tray. Look for a smaller one.
Question:	will this fit a 8 x 8 scalloped plaque
Answer:	Not enough. I had a heavy large, 19" plate come crashing down recently. The edges were uneven so it may have slipped from the hanger, but regardless it crashed.
Question:	How much weight will this hold
Answer:	This says it is a size Large, meant for 14-22". It will not likely work for a smaller plate in that the brackets will get so close that the cinch will not be able to tighten. I would look for a size medium, which fits 9-16", or a different bracket that includes the 11 3/4" size recommendation.

Product features

Since 1993, Better Houseware has been proudly designing, producing, sourcing and distributing quality housewares to retailers of distinction.

Better Houseware is focused on long-term business relationships and success with our retail partners and consumers alike. We leverage long-term manufacturing relationships and experience to produce the best quality products at the fairest prices. Each of our products is developed as a solution to the needs and wants of today’s consumers.

Better Houseware is hailed for our unique & innovative Sinkware, including dish racks and sink protectors, as well as our exclusive Space-Savers & Organizers for the home and office. Kitchen & Gourmet gadgets and other Home Solutions round out the rest of our offerings.

Founded in 1939, Better Houseware Corp. is a multi-generation family-owned and managed company located in Long Island City, New York.

Our Mission is to offer Better affordable and enjoyable solutions to consumers for every room of the home.

BETTER HOUSEWARES PLATTER & TRAY HANGERS

Safely display cherished heirlooms on your wall with this plate hanger. Adjustable brass-plated wire hangers securely hold plates, platters, bowls and trays.

• Fits 10-inch to 16-inch plates, platters and trays
• Suitable for large plates
• Non-scratch vinyl sheathed hooks
• Brass hangers add a polished and eye catching finish to your display
• Includes picture hook and nail

MOUNTING HARDWARE INCLUDED

CREATE MEMORABLE DISPLAYS

SCRATCH PROOF

Product description

Color: As picture show

Type: Hooks & Rails

Feature:Fixed

Package included:1 pc Plate Dish Hanger

Material: stainless steel

Size:

6inches (for 15-16cm / 5.9-6.29 inches dia plate)

7inches (for 17-19cm / 6.69-7.48 inches dia plate)

8inches (for 20-23cm / 7.87-9.05 inches dia plate)

10inches (for 24-27cm / 9.44-10.5 inches dia plate)

12inches (for 27-32cm/10.5-12.5inches dia plate)

14inches (for 32-37cm/12.5-14.5inches dia plate)

16inches (for 37-42cm/14.5-16.5inches dia plate)'

• Type: Hooks & Rails
• Material: stainless steel
• Feature:Fixed
• Package included:1 pc Plate Dish Hanger
• Size: 6inches (for 15-16cm / 5.9-6.29 inches dia plate); 7inches (for 17-19cm / 6.69-7.48 inches dia plate); 8inches (for 20-23cm / 7.87-9.05 inches dia plate); 10inches (for 24-27cm / 9.44-10.5 inches dia plate); 12inches (for 27-32cm/10.5-12.5inches dia plate); 14inches (for 32-37cm/12.5-14.5inches dia plate); 16inches (for 37-42cm/14.5-16.5inches dia plate).

Product description

Super white plate hanger is for hanging 15-20" plates, platters, tiles, etc. The wire is coated with PVC to protect the edges and rims of plates. Suggested weight limit is 4.5 lbs.

• fits plates 13"-16"
• holds up to 4 1/2 lbs.
• vinyl coated

User questions & answers

Question:	I have a platter that is 15" wide, 10 high and 1" deep. Will this hold it tightly to the wall
Answer:	Yes, it's fairly easy with the springs to get the holder on and off the plate. I use these on some large trays that I have hanging on my wall, but pull off for entertaining.
Question:	Can I hang plate on wall with this product and use the plate regularly
Answer:	I had a very thick plate and it worked fine, but I do not think it will work for something that is 1.5 inches high.
Question:	How far out do the ends (the bit that you see from the front) go? I have a tray with 1.5 inch high walls along the whole circular edge
Answer:	I believe the plate hanger is too large for a platter that is only 3" wide.
Question:	Will this hold a narrow platter that is only 3" wide
Answer:	Yes. This is a sturdy hanger.