14 best taprite co2 regulators
Taprite CO2 regulators are essential components in kegging and draft beer systems, as well as other applications where carbon dioxide (CO2) gas needs to be controlled and regulated. These regulators are designed to maintain precise pressure levels to carbonate and dispense beverages like beer, soda, and sparkling water. Here's what you need to know about Taprite CO2 regulators:
Pressure Regulation: Taprite CO2 regulators are specifically designed to regulate the pressure of CO2 gas from a CO2 tank to a desired and consistent level. This is crucial for carbonating beverages and maintaining the appropriate pressure for serving draft beer or other carbonated drinks.
Compatibility: These regulators are compatible with various CO2 tanks commonly used in home brewing, kegging systems, and bars. They often feature different types of connections to fit different tank types, such as CGA-320 for standard CO2 tanks.
Dual-Gauge Design: Taprite CO2 regulators typically come with a dual-gauge design. One gauge displays the output pressure, which can be adjusted using a knob or dial, while the other gauge indicates the pressure remaining in the CO2 tank. This allows users to monitor both the serving pressure and the tank's contents.
Safety Features: Taprite regulators are engineered with safety in mind. They often include safety relief valves that release excess pressure to prevent over-pressurization of the system, which could lead to leaks or other issues.
Precision and Consistency: These regulators are known for their precision and consistency in maintaining the desired CO2 pressure.This is important for achieving the appropriate level of carbonation in beverages and ensuring that draft beer is dispensed at the correct serving pressure.
Commercial and Home Use: Taprite CO2 regulators are suitable for both commercial and home use. Homebrewers often use them to carbonate and serve homemade beer, while bars, restaurants, and beverage distributors rely on them for their draft systems.
Adjustability: The regulators allow users to adjust the output pressure to suit different carbonation levels and serving requirements. This flexibility is particularly important in the brewing industry, where different beer styles may require varying levels of carbonation.
Maintenance: Like any mechanical equipment, Taprite CO2 regulators require periodic maintenance to ensure proper operation. This may involve cleaning, inspecting for wear and tear, and replacing worn components.
In summary, Taprite CO2 regulators are critical components in kegging and draft beer systems, as well as other applications where precise CO2 pressure control is essential. They are valued for their reliability, precision, and safety features, making them popular choices for both homebrewers and professionals in the beverage industry. These regulators help ensure that carbonated beverages are properly carbonated and dispensed with consistent quality.
Below you can find our editor's choice of the best taprite co2 regulators on the market
Taprite T742HP Primary Double Gauge CO2 Regulator, Brass
Product description
WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING. You can use this low-pressure regulator on any CO2 tank with a CGA-320 valve. CO2 tanks have a male thread (CGA-320); these regulators have a female thread. This regulator features dual gauges to measure psi as well as the volume of CO2 in the cylinder, indicating how much CO2 is left in the cylinder and when you should have it refilled. The knob on the front is used to adjust the output pressure. The red polycarbonate bonnet will not chip, break or fade. There is a non-adjustable shut down built into the body of the regulator. The high-pressure ports have left-hand female threads to prevent their use as a low-pressure outlet. The non-removable adjusting screw is designed so that when it is turned all the way in the maximum downstream delivery pressure will not exceed 50psi, with a safety blow off at 60psi. Internal relief valve opens whenever delivery pressure exceeds set pressure by 15psi. This feature serves as a warning that the seat or diaphragm may be worn or damaged and should be replaced. Sintered metal flow control filter in the inlet nipple to prevent dirt and other particles from damaging internal regulator parts. The permanent Quad-Ring Seal on the inlet nipple helps eliminate a source of leaks, so there is no need to use a new fiber washer each time the tank is changed. Outlet features NADS 1600C shutoff which eliminates a source of gas leaks. The duck bill check valve helps prevent product back up into the regulator, a common cause of malfunction in the regulating and relief valve parts. Hose barb end designed for use with 5/16 inch I.D. pressure tubing. All regulators are pressure tested to assure in-field reliability. The seat assembly is easily replaceable, so there is no need to remove the regulator from the tank. Bullets change to: Low pressure gauge (the top gauge) indicates output pressure to the keg The low pressure regulator allows for an adjusted pressure from 1 to 50psi, the maximum downstream delivery pressure will not exceed 50psi High pressure gauge (the side gauge) indicates CO2 tank pressure remaining Duck bill check valve helps prevent product back up into the regulator Assembled and Tested in the USA
- Low pressure gauge (the top gauge) indicates output pressure to the keg
- The low pressure regulator allows for an adjusted pressure from 1 to 50psi, the maximum downstream delivery pressure will not exceed 50psi
- High pressure gauge (the side gauge) indicates CO2 tank pressure remaining
- Duck bill check valve helps prevent product back up into the regulator
- Assembled and Tested in the USA
User questions & answers
| Question: | I just hooked this up to my system but gauges arent moving. is it possible co2 tank is empty? should i be doing anything special after hooking up |
| Answer: | Yes, ours did come with a pressure gauge. |
| Question: | Confused about the "mixed gas" description. i assume this will work with standard co2 tank? also, can secondaries be added at a later date |
| Answer: | Yes, ours did include the low-pressure hose for the BCD, as well as, the high-pressure hose for the pressure gauge and the other two low-pressure hoses for both second stage regulators. |
| Question: | Is there a pressure release valve |
| Answer: | No, ours does not have an integrated weight system. |
| Question: | Put the size of the barb on here |
| Answer: | I've used it as a second stage for my set-up for 5 years and never had it repaired. I've tested it below 100ft and it was easy breathing. It's a great buy. Have a great dive. |
Taprite T752HP Two Product Dual Pressure Kegerator CO2 Regulator
Taprite
Product description
The TAPRITE ADVANTAGE Taprite regulators are built and tested in accordance with UL Standard 252 for compressed gas Regulators and UL 252A for compressed gas regulator accessories All Taprite regulator components and accessories are inspected by our Quality Department upon receipt in accordance with the requirements of MIL-STD-105E High CO volumetric flow provides continuity in product dispensing Polycarbonate bonnet will not chip, break, or fade 10 Micron Filter built in to keep contaminants out of regulator One repair kit for primary and secondary regulators. WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING.
- Large easy adjusting knob to increase or decrease delivery pressure
- Each regulator has a sentry shut-down safety built into the body that instantly protects the dispensing system in the unlikely event of regulator failure
- Outlet features shut-off with back flow check valve and 5/16" I.D. hose barb nipple
- Permanent quad-ring seal on inlet nipple helps eliminate leaks, no need to use a fiber washer each time tanks are changed
- Blow-off is factory set at 55-65 psig
User questions & answers
| Question: | Can i use this for both soda and beer? is there a safety feature that would prevent me from using this for 2 very different psis at same time |
| Answer: | Yes, that's not a problem. You can run the co2 lines to whatever product you would like even if they are different. The separate dials allow for two pressures to be used for each line even if they are far apart. Thank you for your inquiry! |
| Question: | Is the threading compatable with a standard 5lb kegco co2 tank |
| Answer: | Hi Jason,Yes the threading is compatible with a standard 5lb kegco co2 tank.Thank you,ArielleBeverage Factory |
| Question: | Anyone knows the female thread size? The one that connects to the CO2 tank |
| Answer: | The regulator has a female connection to fit CGA320 threaded tanks |
| Question: | I am new with kegging. Using this regulator is it possible to carbonate 1 keg at a time? Then add a 2nd down the road when the beer is done |
| Answer: | You can carbonate 1 at a time, you can completely shut off the other regulator and not use it until you get another keg. If you have two kegs, you can carbonate 1, and serve the other at the same time. Or you can carbonate two at a time, or serve two at the same time. It's a very versatile setup. |
Taprite 12218 1 X co2 Dual Gauge Regulator
Taprite
Product description
WARNING: THIS PRODUCT CAN EXPOSE YOU TO CHEMICALS, INCLUDING LEAD, WHICH IS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS AND REPRODUCTIVE HARM. FOR MORE INFORMATION PLEASE VISIT: WWW.PROP65WARNINGS.CA.GOV Robust design delivers performance and reliability. Extremely durable and user friendly polycarbonate bonnets make adjustments a snap. Pull cap to adjust the pressure and push back to lock it in. High CO2 volumetric flow provides continuity in product dispensing. This primary regulator connects directly to its gas source so it's ready to rock. Recommended operating pressure should be limited to 2/3 of the gauge range for maximum accuracy. UL approved per UL252 Class IV rating for CO2. Polycarbonate bonnet will not chip, break or fade. 10 micron filter built in to keep contaminants out of regulators are used throughout the beverage industry. This regulator is the most consistently accurate and well built regulator on the market. This unit stays on pressure even when your CO2 tank level does down. Approved for use by all major beer distributors and Breweries. Shutoff Valve is a ball Type check Valve that prevents product back-flow into the regulator and tank. Solid Brass with extra long nipple. Regulator has pressure safety system (burst at 55 to 60 psi). permanent Quad ring seal on Inlet nipple helps eliminate a source of leaks. no need to use a new fiber washer each time tank is changed. Regulator will be double boxed to avoid any damage in transit
User questions & answers
| Question: | Does it come pre assembled |
| Answer: | This is for any size aquarium. You adjust the flow of CO2 (usually counted in "bubbles per second") based on the volume of water and plant density. You do have to buy the correct sized diffuser to support your tank. |
| Question: | Hi,Now have tank, regulator, gasline assembly w/ball lock and a carbonator but don't know what to do now. How do I hook into the sodastream w/this |
| Answer: | Seems to be steel (soft metal) the wrench that comes with this does scratch/tear metal collar that’s screws onto the bottle |
| Question: | Does this come with a 1/4" or a 5/16" barb? Thanks |
| Answer: | Make sure the valve on the tank is open. If none of the gauges are moving there is no pressure getting to the valves. An empty co2 cylinder could also be the cause. |
| Question: | Is this Made in USA |
| Answer: | Hello David,Yes, this will work with a standard C02 tank and that is the most common tank that mixed/beer gas comes in. This is an excellent choice for a primary, if you plan to run secondary regulators because of the high pressure ability. AnthonyThe Beverage Factory |
TapRite Separate Pressure Adjusting 2 Product CO2 Regulator
Taprite
Product description
WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING. Tap two kegs at the same time and control the pressure to each of them individually. This two product two pressure CO2 regulator has two separate gauges to uniquely measure the pressure to each keg and allow you to adjust it particularly for the type of beer or beverage you are drinking. A third gauge tells you the amount of CO2 left in your tank. Regulator attaches directly to CO2 tank and has an air shut off switch for each CO2 line. Nonadjustable shut down blows off at 55-65 PSI. The polycarbonate bonnet is lighter weight and stronger than zinc bonnet regulators and it will not corrode in wet environments. No special tools are required to raise or lower the CO2 pressure. The cap knob simply pulls out so it can be turned to adjust pressure up or down then pushes back in to lock in pressure. In stock and ready to ship. Features: Tap two kegs at the same time and control the pressure to each. 0-60 Gauges measure pressure to each keg. 0-2000 Gauge measures CO2 in tank. Has air shut off switch for each CO2 line. High CO2 volumetric flow to insure continuity in product dispensing. Bonnet material is glass-filled Polycarbonate. 10 Micron filter built in to keep contaminants out of regulator. Less prone to freeze up problems. Approved by Pepsi and Coca-Cola. Specs: dimensions: 9\inchW x 7 1/2\inchH x 5 1/2\inchD.
- AT PRESENT WE DO NOT SHIP TO CALIFORNIA
- Tap two kegs at the same time and control the pressure to each
- 0-60 gauges measure pressure to each keg
- 0-3000 gauge measures CO2 in tank
- Nonadjustable "shut down" blows off at 55-65 PSI
User questions & answers
| Question: | Do you need to use a washer when connecting this to a CO2 tank |
| Answer: | It has been awhile since I have pulled it off of my CO2 tank but I would imagine you do, but I never bought anything in addition so my guess is it came with one. It will be another month before I pull it off again but I'll check then. Sorry for the lack of help. |
| Question: | Does this item use the cga 320 connection |
| Answer: | Hello, Yes, this regulator has a CGA320 connection. Anthony The Beverage Factory |
| Question: | Is this a Taprite regulator |
| Answer: | The regulator is assembled by Taprite. |
| Question: | Instead of directly attaching this regulator to the CO2 tank, can it be remotely attached via a hose? And what can be used for this |
| Answer: | Yes if you had the right fittings but it is honestly dangerous. CO2 tanks are at ~2000 psi. Thats a lot of pressure if something ruptures. There might be fittings and a 1/2 SS braided reinforced hose that is rated at 3000 psi (Very expensive) would be my recommendation for something that would work and be safe. The easier way to do this is remotely store the tank and regulator somewhere and run the poly lines to your kegs from there. Much cheaper and safer. |
Taprite 742BF Commercial Grade Double Gauge Co2 Kegerator Regulator
Taprite
Product description
This Tap rite 742BF commercial grade double gauge CO2 kegerator regulator is built to last and loaded with commercial grade features! the commercial regulator works with any CO2 tank with a CGA-320 Valve and measures psi, as well as the volume of the CO2 gas in the cylinder. The second gauge indicates how much CO2 is left in the cylinder and when it should be refilled. The large turn handle in the center is used to easily adjust the output pressure. The commercial double gauge CO2 regulator has a forged Brass body. This regulator also features a non-adjustable safety blow off at 55-65 psi, a flow control Inlet nipple filter and a permanent quad-ring Inlet seal on the primary gauge. This regulator features a larger Valve body for higher flow. What makes this regulator special is its check Valve that prevents backflow of liquids into the regulator. In addition, the flow control on this regulator is automatic, which means that it automatically adjusts the pressure. This is the industry standard found in most commercial environments.
Taprite Dual Gauge CO2 Beer Regulator with MFL Check Valve Bundle
Kegconnection
Product description
Made in the USA. Taprite Dual Gauge CO2 Beer Regulator with MFL Check Valve ( Kegconnection adds an Additional 1 year warranty to Taprite regulators.) Comes with one 1/4 inch barb, one 5/16 inch barb, one swivel nut, one white flared washer. It has an adjustment system that allows pressure to be easily adjusted by hand (no tools required). This is the most consistently accurate, and well-built regulator on the market. It stays on pressure even when your CO2 tank level goes down. UL listed. Approved for use by all major breweries. Shutoff Valve is a ball type check valve that prevents product back-up into the regulator. Solid brass body with an extra long nipple. This regulator has a shutdown safety system (blow off at 55 to 60 PSI). Permanent Quad-Ring Seal on inlet nipple helps eliminate a source of leaks. There is no need to use a new fiber washer each time the tank is changed. Assembled and tested in the USA.
User questions & answers
| Question: | Will this work with a regular co2 tank with a cga320 valve |
| Answer: | Thank you for your question. Yes it will. Tommy G Amazon Specialist at Kegconnection |
| Question: | Other than a mfl vs barb check valve, is there a difference between the t742hp and the t742hp |
| Answer: | No. This is the Made in the USA(Texas) regulator and our best seller. Tommy G Amazon G Amazon Specialist at Kegconnection |
| Question: | Does this check valve prevent beer from accidentally flowing into the regulator |
| Answer: | Hi Kathryn, Yes it does...Tommy GAmazon Specialist at Kegconnection |
| Question: | Does this item use the CGA 320 Connection |
| Answer: | Yes they do. |
Taprite 4 Way Secondary Regulator
Taprite
Product description
Secondary regulators are used when you are attempting to dispense two or more kegs off of the same Co2 tank. A secondary regulator will allow you to regulate the pressure of each keg individually. This regulator has check valves built into the shut off valve to prevent backflow of liquid into the regulator body.
- All regulators are pressure tested for leaks and defects prior to delivery to assure in-field reliab
- Built-in high volume external safety relief valves factory set to relieve at 55-65 PSIG
- Designed to further reduce pressure from a primary regulator to a proper dispensing level
- Forged brass body for durability - has enough mass to serve as a heat sink to help prevent freeze up
- Non-removable adjusting screw limits maximum delivery pressure to 50 PSIG;All regulators are pressure tested for leaks and defects prior to delivery to assure in-field reliab
User questions & answers
| Question: | Does anyone know if the threading for the pass through is left or right threading |
| Answer: | Righty-tighty, lefty loosey. I would consider it standard threading. I took out the pass-thru and capped the end. |
| Question: | Is this assembly supposed to come with the mounting fixtures pictured |
| Answer: | Yes, it will have two mounting plates. Soda Bar Systems |
| Question: | What is the size/diameter of the hose barbs (inlet and outlet |
| Answer: | The brass barb is 5/16" Thank you and hope to see your order DB Entertainment Company / Soda Bar Systems |
| Question: | Can the pass through be capped |
| Answer: | We can provide capped version of this (Usually capped on left side as you look at it from front). You can contact us at Draft Warehouse directly or contact us after making the purchase from Amazon (Sold by Draft Warehouse) and send us a message regarding the capped version. |
Taprite 2 Product High Volume Primary CO2 Regulator-Polycarbonate Body, Brass
Taprite
Product description
Tap 2 kegs at the same time from one regulator. Taprite high flow regulator with 2 outputs. Each output has separate shutoff valve. Manufactured in United States.
- Tap 2 kegs at the same time from one regulator
- High volume commercial grade regulator -polycarbonate body
- Cga320 inlet mounts directly to the Co2 tank
- Includes separate shutoffs for each line (5/16" Barb output)
- Gauges 60lb and 2000lb. Includes safety valve
User questions & answers
| Question: | So I purchased this a couple of months ago now the adjustment knob is stripped out. I can't turn the pressure up or down. Can this be replaced |
| Answer: | I purchased this about 6 months ago and I’ve been having a lot of issues where the gas line valve is in the open position but nothing comes out of the beer tap. The pressure gauge is registering the proper pressure, but not getting any flow. |
Taprite Co2 Primary Beer Regulator 3741-BR New Draft Wine Soda - Dual High Pressure Gauge
Taprite
Product description
(WARNING: THIS PRODUCT CAN EXPOSE YOU TO CHEMICALS, INCLUDING LEAD, WHICH IS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS AND REPRODUCTIVE HARM. FOR MORE INFORMATION PLEASE VISIT: WWW.PROP65WARNINGS.CA.GOV) Primary Beer Regulator, 1P1P, CGA320 Inlet, 5/16\\" Barb Shut off w/Check, 60 PSI and 2000 PSI Gauges
- Primary Beer Regulator for Home Dispense.
- CO2 regulator has 2 gauges, a 1/4 barbed shutoff valve, and pressure relief valve.
- Includes a washer and is ready to attach to a CO2 tank.
- 1P1P, CGA320 inlet, 5/16" Barb Shutoff, 60 lb and 2000 lb gauges.
User questions & answers
| Question: | Is the barb removable |
| Answer: | The shutoff fitting with barb is removable, it has 1/4" npt pipe threads. While it can be removed, any alteration to the product does void the manufacturers warranty. |
| Question: | I purchased a duel kegorator for hubby and read that it may be best to change the single regulator that it comes with to this duel...should I |
| Answer: | This is a great regulator so sure but he will need a way to hook up co2 to 2 kegs so either get a y splitter for this, a 2 co2 distribution block or the dual body taprite |
| Question: | For a nitrogen draft beer dispensing, are these regulators safe (food grade)? Can you use any nitrogen regulator, or is there such a rating as food gr |
| Answer: | You can use any regulator that's made to distribute nitrogen and will fit your equipment. Contact time with the regulator is nonexistent. If you want food grade then the gas you buy has to be rated for the food industry. |
| Question: | Will this screw onto a 20 oz tank typically used for paintball guns? Or will I need an adapter |
| Answer: | You will need an adapter at attach a paintball tank. Please feel free to contact us at 877-909-BREW(please leave a message) if you have any other questions or would like to inquire about having both parts shipped together. Thank you |
Taprite 3741 Dual Gauge Beer Wine Soda Tank Mount Primary Co2 Pressure Regulator
Taprite-Fassco
Product description
Taprite 3741 Dual Gauge Beer Wine Soda Tank Mount Primary Co2 Pressure Regulator WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING. Use this regulator on any Co2 Tank with a CGA-320 valve. Co2 tanks have a male thread (CGA-320), these regulators have a female thread. Double Gauge Regulators Measure PSI (Pounds Per Square Inch) only. The screw in the center is used to adjust the output pressure. CO2, Plug, Primary Soda Regulator, 1P1P, CGA320 Inlet, 1/4" Flare Outlet w/Check, 160 pound and 2000 pound Gauges
User questions & answers
| Question: | Does this taprite 3741 dispense up to 120psi? info on the taprite website says it should |
| Answer: | Yes, it does. Mine goes up to 160 psi. Very easy to adjust to exactly what you want. |
TAPRITE E-T742 CO2 Primary Beer Dual High Pressure Gauge New - CGA 320 Inlet 5/16" Barb Shutoff (Brass Body)
Taprite
Product description
(WARNING: THIS PRODUCT CAN EXPOSE YOU TO CHEMICALS, INCLUDING LEAD, WHICH IS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS AND REPRODUCTIVE HARM. FOR MORE INFORMATION PLEASE VISIT: WWW.PROP65WARNINGS.CA.GOV) Primary Beer Regulator, 1P1P, CGA320 Inlet, 5/16\\" Barb Shut off w/Check, 60 PSI and 2000 PSI Gauges
- Commercial Dual Gauge Design with A 60 Psi and 2000 Psi Gauge Low Pressure Gauge.
- Primary Keg Beer Regulator 5/16 barb Shutoff with Check Valve Ball Check Valve.
- Gray Plastic Bonnet for Easy Pressure Adjustment.
- Co2 Keg Brass Beer Double Gauge Regulator.
User questions & answers
| Question: | does this have an Auto release valve |
| Answer: | Yes. It contains an Auto release valve. Thank You. |
| Question: | I am hooking up a 50lb co2 tank for our beverage truck and need a regulator will this work? Coke is done with truck just need reg. to connect to hose |
| Answer: | It is made for a keg hook up, but it should work on any CO2 tank. You might try the manufacturer for specifications. Thanks, Billy |
Taprite 3 Way Secondary CO2 Regulator
Taprite
Product description
Secondary regulators are used when you are attempting to dispense two or more kegs off of the same CO2 tank. A secondary regulator will allow you to regulate the pressure of each keg individually.
- A secondary regulator will allow you to regulate the pressure of each keg individually.
- To protect dispensing systems each regulator has a built-in high volume external safety relief valve
- Forged brass body for greater durability.
- Maximum delivery pressure: 50 PSIG
- All regulators are pressure tested for leaks and defects prior to delivery
User questions & answers
| Question: | What size are the barbs |
| Answer: | 5/16" Barbs on inlet and outlets. We can customize any sizes. You can contact us directly if you need a different size. |
| Question: | Is this the mod# T1683STC with check valves at each outlet |
| Answer: | Hello TGreene223,This is not the T1683STC, the part number of this item is T1683ST so it does not have check valves.AnthonyThe Beverage Factory |
| Question: | Whats the size of the barbed fittings |
| Answer: | It fits the standard 5/16" ID gas tubing |
| Question: | Can you switch what side the Co2 inlet barb and plug are on |
| Answer: | Yes u can |
Taprite Primary CO2 Regulator, Dual Gauge, 5/16" barb, Red
Product description
Our high performance regulator for high volume and commercial dispense is designed to provide maximum flow for simultaneous dispensing through multiple taps while resisting freeze up. The polycarbonate bonnet is easy to adjust when changing kegs and CO2 tanks. The polycarbonate bonnet and brass body are corrosion resistant make the regulator highly durable in a variety of environments. This 1 pressure 1 Product regulator has a CGA320 inlet, 5/16"barb shutoff W/check, and 60lb and 2000lb gauges so you can see both your output pressure and how much CO2 is left in your tank.
- Gauge #1 - 60lb (0-50 PSI) output pressure
- Gauge #2 - 2000lb fill level (amount of Co2 remaining)
- Inlet - Cga320 (standard Co2 connection threads) with built in rubber washer
- Outlet - 5/16" Barb shutoff W/check
- Large (Red) pressure adjustment knob
- Compatible with Taprite Guard gauge (744gp)
Product features
Primary CO2 Regulator
Our high performance regulator for high volume and commercial dispensing is designed to provide maximum flow for simultaneous dispensing through multiple taps while resisting freeze up. The polycarbonate bonnet is easy to adjust when changing kegs and co2 tanks. The brass body is corrosion resistant, making the regulator highly durable in a variety of environments. This 1 pressure 1 product regulator has a cga320 inlet, 5/16"barb shutoff w/check, and 60lb and 2000lb gauges so you can see both your output pressure and how much co2 is left in your tank.
Premium Double Gauge CO2 Regulator - Polycarbonate Bonnet
Taprite
Product description
(WARNING: THIS PRODUCT CAN EXPOSE YOU TO CHEMICALS, INCLUDING LEAD, WHICH IS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS AND REPRODUCTIVE HARM. FOR MORE INFORMATION PLEASE VISIT: WWW.PROP65WARNINGS.CA.GOV) One gauge tells you the pressure to the keg and the other shows how much air is left in your air tank. Nonadjustable shut down blows off at 55-65 psi. Has a convenient air shut off switch. The polycarbonate bonnet is lighter weight and stronger than zinc bonnet regulators and it will not corrode in wet environments. No special tools are required to raise or lower the CO2 pressure. The cap knob simply pulls out so it can be turned to adjust pressure up or down then pushes back in to lock in pressure. In stock and ready to ship. Features: 0-60 gauge measure pressure to each keg. 0-2000 gauge measures co2 tank. Has air shut off switch for CO2 line. High CO2 volumetric flow to insure continuity in product dispensing. Bonnet material is glass-filled polycarbonate. 10 Micron filter built in to keep contaminants out of regulator. Less prone to freeze up problems. Approved by Pepsi and Coca-Cola. Includes: Double gauge regulator.
- Commercial Dual Gauge Design with A 60 Psi and 2000 Psi Gauge Low Pressure Gauge.
- Primary Keg Beer Regulator 5/16 barb Shutoff with Check Valve Ball Check Valve.
- Gray Plastic Bonnet for Easy Pressure Adjustment.
- Co2 Keg Brass Beer Double Gauge Regulator.
User questions & answers
| Question: | Does this come with a 1/4" or 5/16" barb? Thanks |
| Answer: | That regulator comes with a 5/16 barb. |
| Question: | Does this come with a 1/4" or a 5/16" barb? Thanks |
| Answer: | I have two and both have a 5/16 Barbs. Great regulators by the way. |
Latest Reviews
View all
Drugstore Red Lipsticks
- Updated: 20.05.2023
- Read reviews
Car Toy For Kids Boys
- Updated: 12.07.2023
- Read reviews
Dax Dog Foods
- Updated: 30.06.2023
- Read reviews
Dehumidifier Thermostat
- Updated: 12.02.2023
- Read reviews
Disney Baby Receiving Blankets
- Updated: 02.04.2023
- Read reviews