14 best keg towers

Product description

Mount this stainless steel beer tower on your bar or at home! Enjoy beers!

It's a double tap, 3" diameter model made of mirror polished stainless steel.Looks Great!



Dimensions:

Column 14.5" H x 3" Dia.

Tube Length: 4'



Package Includes:

1X Beer Tower.

2X Faucet;

2X 4' beer lines with connectors.

2X black plastic facet knobs (tap handles).

1 SET Fasteners



Warm Notice: dear customers, your satisfaction is our top concern, if you receive any defective items, please never hesitate to contact us, we offer 30days return policy, thanks much :)

• Diameter: 3" (76mm).
• Material: Polished Stainless Steel Tower + 2 Faucet taps chrome plated brass
• Comes with 2pcs of 4 Feet Food grade Beer tubes;
• Looks pretty if you put it on your bar or at home;
• 1 SET Fasteners included

User questions & answers

Question:	What is the simplest way to connect the tower hoses to a Corny Keg, cut off nut? The tube opening looks too large for standard black/gray connector
Answer:	beige
Question:	Does this come with a trim ring that fits around the base of the tower to cover the scews
Answer:	14.6 x14.6 x 7.9
Question:	Is this tower insulated
Answer:	62.2inch
Question:	How do you access the lines on the tower? Does the top come off
Answer:	Personally, I feel quite simple. It took me about five minutes to set up the lamp myself.

• PRO SERIES DUAL GAUGE REGULATOR: Easily measure PSI and Co2 volume and adjust Co2 output pressure using this Kegco 542 Pro Series Double Gauge Regulator packed with premium features. The top gauge indicates output pressure, while the side gauge tells you what's left in the Co2 tank, so you don't run out of gas during a party. The Standard plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve.
• LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L D System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
• SINGLE FAUCET DRAFT BEER TOWER: Featuring a beautiful Standard-plated metal finish and a matching Standard-plated faucet with metal lever, this 3" diameter air-cooled Kegco D4743T draft beer tower is the same stylish tower used on most commercial grade kegerators. This tower conveniently includes 5 feet of clear beer tubing ending in a nozzle and hex nut assembly for quick connection to all standard keg couplers, as well as a gasket and for screws for easy mounting.
• STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4" length.
• INCLUDES DETAILED INSTRUCTIONS: This kegerator conversion kit comes with easy-to-follow directions and all of the high-quality draft dispense components you'll need to quickly and easily convert your refrigerator into a high-performance draft beer dispenser

User questions & answers

Question:	Just put this together after almost a year in the box and the pressure gauge is leaking and can’t seem to get it to stop, can I get a replacement
Answer:	Yes, you can.
Question:	One of my taps is dripping and I can’t get it to stop. Any ideas
Answer:	Most of the functions are the same
Question:	What size hole needs to be drilled for this
Answer:	This 64oz size is portable and fit the refrigerator
Question:	Does the convert my one tap to two
Answer:	Thank you for your inquiry. I would not recommend running PBW through a drip coffee maker.

Product features

BACOENG Double Faucet Tower Kit

Set up a home or commercial brewing system to serve cold draft beer using the BACOENG Kegerator conversion kit. It includes all necessary tools you need to make your work processed easily and saves you hundreds of dollars. It is ideal for seasoned beer enthusiasts looking for a reliable Kegerator before spending a fortune on a commercial unit, or people who are just starting out.

Instruction Manual includes:

Stainless Steel Beer Tower

• 3" Dia. polished stainless steel tower
• Single chrome plated brass faucet tap with a stainless steel shaft
• User-friendly spring return handle design
• Comes with 5Ft Food grade beer tubes for each tap
• Looks great mounted on your bar or counter top and function just as those do at your favorite bar

Heavy-Duty Dual Gauge Regulator

• This unit weighs about 4 pounds and includes a rubber protective covers.
• It always tell you working pressure and tank pressure with pinpoint accuracy.
• A convenient knob style pressure dial that can be adjusted without tools.
• Shutoff valve with built in spring loaded check valve to prevent beer from flowing backward into the gas lines.
• Pressure Relief Valve Releases at 45PSI to Ensure Safety

D-System Keg Coupler

• Features a sturdy nickel-plated forged brass body with a stainless steel probe
• Designed for use with all domestic brand American D system Sankey kegs.
• The lever-handle design is easy to use - simply grip the handle and then down on the handle to couple the keg.
• A pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.

The handles on this system keep getting stuck. How to fix this?

Sticking faucets are a common problem in home draft systems, especially when they are not used often. Disconnecting the draft system and running the faucets under hot water for a few seconds usually does the trick. Also spraying the front of the faucets with water can help as well, essentially beer dries in the front portion of the faucet causing it to stick, beer is very sticky when dry but water breaks it down pretty easily.

I cant get anything other than foam, is there a problem with my settings?

1. High Co2 Pressure: We normally recommend 10~12 pounds. Pull the relief valve on the coupler and adjust output up as you are pouring.
2. Beer Lines: Beer lines longer than 6 feet can cause issues. After long use, please use our cleaning kit (ASIN B07HGN896R) to ensure that the lines are free from dirty.
3. Coupler Probe Washer: If it is damaged or missing, you will always get foam beer.
4. Poor pour: Hold the glass 45 degrees, tilt the glass upright as you reach the halfway point.
5. Warm hose: Install a tower cooler to cool the beer hose inside the tower.

How to fix find and fix a leak in a regulator?

Get a spray bottle and fill it with foaming agent. You can also use a no-rinse sanitizer like Star San mixed with water if you are a home brewer. You just need something that will bubble up when air is escaping.

TIPS: After the installation is complete, please be sure to observe the system for leaks for avoid wasting CO2.

The manual is lacking? Missing Accessories?

We have summarized the recent customer feedback and updated the manual. We will update for you the latest version. Besides, we offer a one year waranty. For any missing accessories and defective accessories, we will help without hesitation.

Product description

This Beer Tower is built with polished stainless steel

this 3 faucet Beer Tower comes with 5 Feet (3/16" ID) Beer Hose with Tailpiece and Hex Nut Connection

This triple Tap Beer tower has 3 brass faucets with levers.



This 3-Faucet Polished Stainless Steel Draft Beer Tower is an excellent equipment for adding a 1/6th keg to your direct draw kegerator.

• 3 Faucet Beer Tower with 3-Inches Column - 3 Faucets
• Pretty Polished stainless steel body;
• A tool wrench included;
• Come with some spare springs, red seals and 5 Feet (3/16" ID) Beer Hose, with Tailpiece and Hex Nut Connection
• This YaeBrew Triple Tap Beer Tower has 3 brass faucets with levers.

User questions & answers

Question:	Can the faucet handles be taken off/unscrewed to put the brewer’s special draft handles on? Really want to do that
Answer:	The diameter of the table surface:12.9inch/33cm,thank you!
Question:	hi. this publication included the three faucet . just like in the picture
Answer:	The correct is: Max 40W, thank you!
Question:	What are the springs for
Answer:	The lamp head adjust: Up/down and left/right swivel.
Question:	I have ball lock kegs, what do I additionally need in order to connect the included hex nut connectors
Answer:	Love this lamp/ table. Perfect size when space is limited. Have received lots of compliments on it too.

Product description

Single Tap Beer Tower SET

Packing:

1 pcs Stainless Steel Beer Tower Body

1 pcs Beer Tap and Beer Tap Handle

1 pcs 3/16 ID Clear Beer Tubing

4 pcs Standard Hex Nut

1 pcs Mounting Gasket

1 pcs Hose Clamp

1 pcs Beer Tap Wrench

The Tower allows you to mount the keg tower on top of your bar, countertop, or refrigeration unit for a clean, professional setup;

The bar tap tower is durable, corrosion resistant, and preserves the fresh flavor of your beer or other draft beverages;

• 1.Stainless Steel Draft Beer Tower, Include 1 PCS Beer Faucet, 3/16” ID Hose Drink Tubes, Other Assemble Accessories;
• 2.The Beer Tower Body is made of Grade 304 Stainless Steel and the Tower Faucet is Chormed Brass;
• 3.The Single Faucet Beer Tower is Well-built and Attractive, can be widely used at Home or commercial Bar Setup;
• 4.This Draft Beer Tower Will fit on any Standard Kegerator or replace a 3" Diameter Tower and will make a great addition to your Home Brewing Collection;
• 5.Guarantee: Quality Guarantee, any problem for Single Tap Beer Tower, Money Back or Replacement free.

User questions & answers

Question:	Where does the spring go
Answer:	I use sankey kegs.. so the nut fists to my coupler. so yes I would say on your kegs cut off the nut and add a quick releases or just use the fitting you have
Question:	Why is the faucet leaking
Answer:	No it doesn't. The ring from my single tap did not fit it either.... This tap has not been great for us - taps stick and leak. I would keep shopping. Maybe we just got a bad one, but I can't recommend it base on our experience.
Question:	Is this tower 11" tall
Answer:	It is insulated at the top. Not throughout.
Question:	how tall is the tower? Will a 500ml glass fit under it
Answer:	Yes, the top does come off.

• [Double Your Pouring Power]: Limiting yourself and your guests to pouring one beer on tap at your in-home bar is time consuming and frustrating; The G. Francis Double Tap Draft Beer Tower is a beer faucets accessory that will double your pouring power and give your bar the finished feel you have been longing for
• [Use Your Equipment]: Inside lined with foam sheet for cooled tower systems insulation; Tower stands 13.25 inches (33.7cm) tall (not including 3.1-inch/7.9cm tall tap handles) and has a 3-inch (7.6cm) diameter and 4.5-inch (11.4cm) base diameter; 2.75-inch (7cm) center-to-center mounting hole distance (fits standard 3-inch/7.6cm hole pattern); Includes 2 separate 5-foot (1.5m) lengths of 3/16-inch (4mm) inside diameter (ID) (7/16-inch / 11mm OD) clear beer tubing with a 4.5-foot (1.4m) reach
• [Built to Last]: Constructed from polished silver stainless steel hardware and components, hard plastic faucet knob tap handles, and soft rubber faucet cap sanitary covers for maximum strength and longevity that resists rust and corrosion while preventing scratches and other damage; PVC transparent hose is safe for beverages
• [Keep Out Contaminants]: Black faucet cap sanitary covers are the most simple and effective way to keep the faucets clean and are an essential part of draft faucet hygiene as it protects the faucets from insects and contaminants that could otherwise make their way into the spout of the faucet and into your drink; Tap handles are threaded and removable for easy cleaning and sanitizing
• [Package Contents]: This beer faucet accessories package includes double tap draft beer tower, beverage tap flow control faucets, faucet covers, mounting hardware bolts, tower gasket, hose drink tubes, hose clamps, and a multi-purpose keg faucet wrench for your convenience; Keg couplers required, not included

User questions & answers

Question:	I will need to replace the hoses with 10 ft lines. Will I be able to replace the lines easily
Answer:	yes you can. I own a brewery and use this tower and they're like new after using them hard over a year. Good luck.
Question:	ARe the faucets stainless steel
Answer:	Yes, everything you see is what you get. So far I love mine
Question:	Can these be used with Nitogen for a proper stout pour
Answer:	They're replacement springs for the taps. The taps are spring loaded to close when there's no pressure on the tap handle
Question:	Are the taps foward sealing? Are they self closing
Answer:	I use cornelius kegs with ball locks. I cut off the hex nut and used a barbed/gas fitting and corny keg adapters. There are lots of choices on Amazon but something like this: https://www.amazon.com/Keg-Disconnect-Ball-Lock-Homebrewing/dp/B07V7T8YXB/ref=sr_1_4?keywords=ball+lock+fittings&qid=1577626648&sr=8-4

Product features

About the G. Francis Double Tap Draft Beer Tower

It is your turn to host poker night, and when you have guests in your bar waiting for a refreshing beer, there is no time to waste. It is game on with the G. Francis Double Tap Draft Beer Tower.

Package Contents:

• Beer tower
• Dual faucets
• Faucet covers
• Mounting bolts
• Tower gasket
• Tubes
• Hose clamps
• Faucet wrench

*Keg couplers not included

DOUBLE YOUR POURING POWER

It will double your pouring power and give your bar the finished feel you have been searching for.

DRESS UP YOUR BAR

The sleek design compliments any countertop, kegerator, or keezer.

EASY TO MOUNT

It looks great mounted on your bar or countertop and functions just as those at your favorite bar. Drill a hole through your bar and insert the hoses through the hole and inside your refrigeration unit, and screw the tap in place on your bar or directly on your kegerator.

Product description

Draft beer towers are a simple and economical solution for your home bar. They look great mounted on your bar or countertop and function just like those at your favorite bar. This is a single tap model with a chrome finish (2 1/2-inch diameter). Comes with matching chrome plated faucet with brass lever and black plastic faucet knob (tap handle). In stock and ready to ship. Features: Beautiful chrome finish. Single faucet (included). Includes beer line and fittings. Specs: Dimensions: 2 1/2" D with 3 1/2" D base flange and cover 11" H and 9" H from counter to bottom of faucet. . Includes: 4' of beer line with hex nut connectors. Mounting gasket. Chrome plated faucet with brass lever. Black plastic faucet knob (tap handle).

• Beautiful chrome finish.
• Single faucet included.
• Includes 4-feet of beer line with fittings.
• Beer towers are a simple and economical solution for your home bar.
• 2 1/2-inch diameter, with 3 1/2-inch diameter base flange and cover

User questions & answers

Question:	What diameter is the shank
Answer:	You dis-assemble the handle dispenser and goes between the dispenser and the tower. The spring pushes the handle back vertical after you let go to stop dispensing. Mine didn't come with a spring.
Question:	Could I replace the fitting for a ball lock fitting for corny kegs
Answer:	Without the ability to examine its construction, I will offer a general hint. It is very important that it is assembled correctly. That includes washers/gaskets properly in place, and valves positioned correctly. Of course, the obvious advice is to be sure that the handle is back all the way. I encountered such a problem after I cleaned the tap. I did reversed one of the parts in re-assembling the tap. I lost all the beer and all the CO2.
Question:	how does the line hook up to the tower
Answer:	The tower itself is 13.5 ". The clearance under the faucet is just over 10".
Question:	Is the tower metal, or chrome plated plastic
Answer:	The tower is ~13.5" tall. There is a little over 10" clearance beneath the faucet. Yes, a 500 ml (16 oz.) glass will fit under it, especially given that to pour properly, one should tilt the glass.

Product description

Home Brewing Lover- Beer Tower

DETAILS:

Color: Silver

Material: Stainless Steel+Plastic

Tower Height: 12.99 inch

Tower Diameter: 2.99 inch

Tower Base Diameter: 4.33 inch

Tube Length: 59 inch

Tube Diameter: 3/16 inch

FEATURES:

1. Packing: Double Tap Draft Beer Tower, 2 PCS Beer Faucet, 5ft 3/16” ID Hose Drink Tubes, Assemble Accessories ;

2. Free Assemble Accessories include Faucet Wrench, Tower Gasket, Mounting Hardware Bolts will let you assemble more easily;

3. Material: 3" Diameter Beer Tower, made of Chrome plated steel for Long Life, Chrome plated beer faucet, made of durable mirror polished stainless steel;

4. Draft Beer Tower look great mounted on your bar or counter top and function just as those do at your favorite bar;

5. Guarantee: Quality Guarantee, any problem for the Beer Tower, Money Back or Replacement free.

• 1.Packing: Double Tap Draft Beer Tower, 2 PCS Beer Faucet, 5ft 3/16” ID Hose Drink Tubes, Assemble Accessories ;
• 2.Material: 3" Diameter Beer Tower, made of Chrome plated steel for Long Life, Chrome plated beer faucet;
• 3.Assemble: Include Multi-purpose Keg Faucet Wrench, Tower Gasket, Mounting Hardware Bolts, Very easy to assemble ;
• 4.Chrome Plated Brass Faucets with Straight Shaft and Polished Interior, Standard to the Commercial Beer Industry;
• 5.Guarantee: Quality Guarantee, any problem for the Beer Tower, Money Back or Replacement free.

User questions & answers

Question:	Is this insulated
Answer:	You may need to replace the fittings, in my case the hoses were pressed on and I found it easier to go ahead replace the fittings.
Question:	are these forward sealing? Do they stick if unused for a week
Answer:	They appear to be, they are nice and heavy (well built). I've had mine for 6 + months now and they haven't chipped, guessing stainless. They do require a monthly cleaning to keep them from sticking.
Question:	I have a single kegerator, can I use this to make it a double? Also, will I need a double regulator
Answer:	Yes
Question:	Is this outdoor rated
Answer:	yes

Product description

This draft beer towers with 2 taps is a simple and economical solution for your counter top, kegerator, keezer, or your home bar.



Let's enjoy the beer with your friend at the same time.



Made with BPA free stainless steel construction, safe and durable



3"/76mm diameter column



2 chrome plated brass faucet taps



The faucets are able to be completely dismantled for easy cleaning and sanitizing



the inside of the tower is lined with a thin styrofoam sheet to help with insulation for cooled tower systems



two separate 4" lengths of 0.16" clear beer tubing



Material: stainless steel + brass



Dimensions: 



Column(HxDia): 12.6"x3"



Tube length: 4' 



Weight: 4.03lbs







Package includes: 



1 x beer tower



2 x Faucet



2 x 4'beer tube



2 x little tube



4 x mounting bolts



1 x tower gasket



8 x hose clamps



1 x multi-purpose keg wrench



FAQ:



Q1:What's the warranty？



A:Any issue about our products(refunding or returning) or service, please feel free to email us. We promise to give you a satisfactory solution at the first time.

• High quality and durable - 3"/76mm diameter column polished stainless steel tower and 2 chrome plated brass faucet taps, compact and sturdy, never rusted.
• Double your pouring power - 2 taps speed up your pouring time, you can enjoy the beer time with your friend at the same time without waiting, The faucets are able to be completely dismantled for easy cleaning and sanitizing.
• With cooled tower systems - the inside of the tower is lined with a thin styrofoam sheet to help with insulation for cooled tower systems.
• Poduct dimension - The polished stainless tower stands 12.6" tall (not including tap handles) and is 3" in diameter, two 4'lengths of 0.16" clear beer tubes for 2 taps.
• Multifunction application - this draft beer tower set is great mounted on counter top, kegerator, keezer, or your bar.

User questions & answers

Question:	Are the tap handles the type that could be replaced with tap handles from an actual bar
Answer:	2.5"
Question:	What type of beer can you use
Answer:	Yep. I did.
Question:	Where do you pour the beer
Answer:	It is attached to the barb on the tower shank and it is clamped to the barb. The tubing is already pre-installed when it goes out.
Question:	Would this work with insignia - 5.6 cu. ft. 1-tap beverage cooler? https://www.amazon.com/insignia-beverage-cooler-kegerator-stainless/dp/b07dtf3yyk
Answer:	The tower is metal.

• 【MADE FROM TOP QUALITY MATERIAL】 Talos 3” Diameter Beer Column Tower is constructed of stainless steel construction, solid is less susceptible to wear and tear, and will not impart unwanted flavors. Keep your faucet always as new!
• 【NSF APPROVED FOOD GRADE】Comes with 1 Self Closing Faucets made of heavy-duty brass which is food safe, corrosion-resistant, durable, and will prevent metallic off-flavors with the mechanism.
• 【WHAT IS IN THE PACKAGE】12” Tower Height with two Chrome plated brass tower shanks, each with 5" of 3/16” ID beer line connected to a Chrome Plated tailpiece.
• 【ACHIEVE THE PERFECT POUR】Professional TALOS beer faucet is flexible to operate, not easy to stick, has less agitation and foaming. Let's making freshly brewed beer in every glass!
• 【ALL YOU NEED IS USER-FRIENDLY DESIGN】Simple structure beer faucet helps you disassembler easily and make cleaning regularly. It's a good choice if you are in making a bar business.

User questions & answers

Question:	Will this work on a danby kegerator
Answer:	Not really. I added some insulation (silver mylar style) around the inside of the tube and it helped. We also have a small fan in the cooler to keep the air inside the column/tower cold as well so the insulation was a must.
Question:	Can you replace one of faucets to Nitro instead of CO
Answer:	I am not sure about the forward sealing, but we have not had any issues with it getting stuck when left for a week.
Question:	Does this come with a wrench for taps
Answer:	Yes you can use it on single. No you don’t need a double reg you will need a splitter and then you can turn the valve on and off if your not using it. Make sure your kegerator will hold two kegs I tried to get 2 1/4 kegs in mine wouldn’t fit I have to uses smaller one to use both of mine
Question:	Will this work on a edgestar? And is this a self closing faucet
Answer:	Honestly. Do not know.

Product description

This is a top-of-the-line single faucet Brushed Stainless Steel Draft Beer Tower with a 3" diameter column. This tower comes in a complete set with a stainless steel faucet and 5 feet of 3/16" clear beer tubing that ends in a nozzle and hex nut assembly which connects to all standard keg couplers. 100% Stainless Steel ensure that your beer only touches stainless steel components from the keg to your glass!.

• Stainless Steel Single Faucet Draft Beer Tower
• 3" Diameter Column
• Chrome-Plated Brass Faucets
• Includes two 3/16" Clear Beer Tubing (5' Lengths) with Nozzle and Hex Nut Assemblies
• Popular for outdoor or commercial applications.

User questions & answers

Question:	Does this need CO2 to work
Answer:	Dear Customer Thank you for your question. It suitable for all kind of beer.It can adjust the beer flow speed and beer foam.But this product need to work with the beer barrel that added pressure and carbon dioxide. Hope our answer could help. Thank you so much
Question:	Can this be used one a wine barrel to extract wine from it
Answer:	Dear Customer Thank you for your question. The beer pour out from the beer tower tap, but this product need to work with the beer barrel that added pressure and carbon dioxide. Hope our answer could help. Thank you so much
Question:	What is the size of the bolt circle on this? I need a 3.75" bolt circle
Answer:	Yes,it can word.

Product description

The Kegco DT1F-630SS Single Tap Beer Tower has a 3" diameter tower and measures 12" tall. This tower is constructed of stainless steel and comes equipped with a single Perlick 630SS stainless steel faucet, a sleek black faucet knob, and one 5' length of 3/16" clear beer tubing with nozzle and hex nut assemblies. Because this stainless steel tower uses all metal stainless steel parts it has 100% stainless steel contact that ensures your beer will only touch durable and sanitary stainless steel metal components. Draft beer tower connects to all standard keg couplers and can be easily mounted with the included gasket and screws. The included Perlick stainless steel beer faucet is the most sanitary faucet available anywhere. Its innovative seat-forward design keeps internal parts from being exposed to air, preventing the handle lever from sticking and minimizing bacterial build-up. This revolutionary design and stainless steel body ensures a brewery fresh taste. In combination with the stainless steel tower shanks, your beer will only touch stainless steel metal components with this tower.

User questions & answers

Question:	Can i screw this directly to my mini fridge
Answer:	Unfortunately it doesn't come with a wrench for the taps as you're able to tighten it with your hand. However we do have a wrench for taps along with other tools for kegging that will be added to our store front within the next few days!
Question:	Hello, this tower comes with shank and beer line
Answer:	This column will fit on your edgestar and the faucets that are included are not self closing, but we do have a variety of different faucets you can check out.
Question:	Do the towers come in longer lengths
Answer:	Dear Customer Thank you for your question. If your tap is 3/8 screw thread then it could. Hope our answer could help. Thank you so much

• Stainless Steel Dual Faucet Draft Beer Tower
• 3" Diameter Column
• Manufactured in China
• Chrome-Plated Brass Faucets
• Two 5' Lengths of 3/16" Clear Beer Tubing with Nozzle and Hex Nut Assemblies

User questions & answers

Question:	Does any Stout faucet will fit into this tower? i want to serve nitro cold brew coffee with mine
Answer:	Some wine kegs are the same as beer. You need to inquire about kegs thru distributor
Question:	Is it totally secured from the top of the counter and does it matter what the thickness of countertop is
Answer:	Your good
Question:	how much does it weigh
Answer:	Yes this column will work with your Danby Kegerator.
Question:	How tall is it
Answer:	Short Answer is, Yes it's possible! If you're trying to run a standard tap and a nitro tap which would require you to have two different Kegs/CO2 Cylinders. Why? Because you'd be required to run two different PSI pressures for your standard & nitro.

Product description

Note:If there is any problem,pls kindly contact us for help.



More Details:

The Beer tower is made of polished and durable 304 grade stainless steel with a 3" diameter column, providing a clean, modern look.

Chrome Plated Brass Faucets with Straight Shaft and Polished Interior, Standard to the Commercial Beer Industry.

The product is basically assembled, and the customer can use it without having to use tools to install the faucet.

Suitable for bars, hotels, restaurants, home brew.



Specifications:

Size: two taps

Material: Chrome plated steel

Column:14.5 inch x 3 inch

Tube Length: 4ft

Package Weight: 2.3kg/ 4.6lb



Package Includes:

- 1* Double Tap Draft Beer Tower

- 2* Beer Faucet

- 2* 4ft Beer Line per Faucet with Connectors

- 2* Black Plastic Facet Knobs (Tap handles)

- Assemble Accessories: Nozzle and Hex Nut Assemblies, Wrench, Screws & Gasket Included (as picture shows)



Notes:

Please allow 1-30mm error due to manual measurement.

Due to the difference between different monitors, the picture may not reflect the actual color of the item.

• ▶3" / 76mm Dia. Polished Stainless Steel Tower. Made of fine material, With stainless steel stopsocks with stainless levers, beer hose assemblies with coupling nut and washer.
• ▶Preassembled long brewery approved beer hoses, that are unaffected by normal cleaning chemicals, with a hex nut and neoprene washer on one end for connecting to keg coupler.
• ▶Fine quality chrome plated solid brass beer faucets with a chrome plated forged brass body, a washer for smooth consistent performance and easy operation, a solid brass stopsock lever, and a chrome plated bonnet, shaft, and collar.
• ▶Suitable for bars, hotels, restaurants, home brew. Draft beer towers are a simple and economical solution for your home bar.
• ▶Package include: 1 x Beer Tower, 2 x Faucet, 2 x 4ft beer tube per faucet with connectors(Already assembled in the beer tower), 2 x black plastic facet knobs (tap handles), 1 Set Fasteners.

User questions & answers

Question:	Is the beer hose removable at both ends? I would like to replace the beer hose with a longer, 10’ hose
Answer:	Hello Chris,This tower comes with the mounting hardware to mount to a kegerator with a tower hole already built into it. If you are mounting to a converted mini fridge you may have to supply your own screws, or drill all the way through the top of the unit and then use the long screws and nuts that are included. AnthonyThe Beverage Factory
Question:	What is the diameter of the hose
Answer:	This comes with the Faucet, Shank, and Beer Line attached. -Beverage Factory Customer Service
Question:	what is the size of the tubing going to the taps
Answer:	The tower can come in a 12" and a 14"
Question:	How do you open the top
Answer:	Yes it does. Co2 is what pushes the beer out

Product description

Wanted to host a party at home or garden or cover a custom event at your office, but afraid of spilled beer mess?

No more spilled wort and messy stuff at your wall and dishes with Proper Pour Kegerator Beer Drip Tray!

With a 3” tower cut out that is great for homebrew and draft beer keg! The plate is a stainless steel with non slip rubber at the bottom making the tray stationary and perfect for your bar countertop without the hassle of drilling holes for installation!

With products from Proper Pour, your satisfaction is guaranteed!

• KEEPS THE BAR CLEAN! Place it on top of bar countertops and position it under the faucet to collect excess beverage or liquids! The draft beer drip tray screen has punch holes that will surely provide you with a splash free, spill, mess, and stain free countertop! Must-have essentials and accessories for restaurants, tap rooms, kitchen and home bar stations.
• NO NEED TO DRILL HOLES! Save the hassle of drilling! You don’t have to destroy that wonderful, expensive countertop! This drip tray simply sits on top of the bar, and the nonslip rubber pads underneath helps keep it in place, thus avoids moving and wobbling.
• ECONOMICAL AND EASY TO USE! They come with removable covers for convenient cleaning. No need to spend for plumbing lines. This surface drip tray has no drain hole below which makes it very easy to clean: Simply empty the tray and rinse with water. Dishwasher safe.
• DURABLE AND BUILT TO LAST! Made of high quality corrosion resistant and rust free stainless steel construction with a nice quality, brushed finish that gives the tray a distinctive classic look! Lightweight but sturdy, it can be carried and emptied with ease. Has non-skid rubber base to keep it steady on the surface. Ideal use for both indoor and outdoor kegerators!
• DESIGNED WITH A CUTOUT FOR 3” TOWER BASE. This rectangular countertop brew drip tray has a cut out dimension of 5" x 1.75" and the tray dimensions of 12" L x 7" W x 3/4" H that is designed to fit a 3 inch diameter tower base flange. Great for most kegs and counter mount applications and also two-tap towers!

User questions & answers

Question:	I have an 11 1/2 by 7 1/2 cut, will that fit
Answer:	Hi Jorge Yes it will fit. We would suggest an all stainless tower with 304 grade stainless beverage contact (shanks, faucet and connection points) for coffee. You can contact us directly if you need any more information.
Question:	What is the distance between the center of the tap cut out and the front edge of the tray
Answer:	It is completely secured via the 4 holes in the flange. I don't recall for sure, but I don't believe it comes with screws or bolts, so you will obtain whatever length you need for your counter. I would not use a counter that is too thin, though... I used a 1/2" board for my countertop.
Question:	I have a 3 tap tower (3”) and the 2 outside lines are not quite 180 degrees apart. With this tray catch for the outside lines
Answer:	I can't tell you exactly. Been a while since I mounted it. The faucets are good quality and heavy. The tower is a bit thinner, but still good for the price. I've gone through about ten 5 gallon kegs since I installed it and it has held up nicely.
Question:	Is the cutout large enough to fit around the trim ring on a 3" tower? I measured my to be about 4" on mine from Kegerator.com
Answer:	The tower is 12" tall.