14 best plastic riveters

Product description

SG19400 Features: -Rivet tool. -Plastic rivets in one stroke without re-gripping. -One hand operation. -All sizes using a single nosepiece. Dimensions: Overall Product Weight: -0.8 Pounds.

• Product type : AUTO ACCESSORY
• Country of Origin : China
• Package Weight: 0.36 kg
• Package Dimensions: 4.8 L x 15.2 W x 25.4 H(cm)

User questions & answers

Question:	The tool does not cut the stem! How does it work
Answer:	Just put the rivet in place, insert long side of the rivet into the tool and squeeze. It will set-up rivet. Regarding cutting the rivet. Sometimes it cuts, sometimes it does not. In this case just cut the rivet with any kind of cutter.
Question:	I can't remove a stuck stem, even following the directions. Needle nose plyers don't work. Any other options
Answer:	Is the stem in the rivet or in the tool? In the rivet, use a pin punch to push it back thru the head of the rivet to the underside of the rivet. If in the tool, unscrew the nose cap, hold the tool POINTING DOWN (gravity helps here) and spread the two jaws apart (utility knife blade works) w/o pushing the jaws back into the tool and the stem will be released. If the stem has fallen deeper into the tool, shame on you. Continue here by wedging a tooth pick in the side of the jaws to keep them open, make sure tooth pick does not protrude into center of jaws. Now shake it while pointing jaws down to make stem fall out. If the jaws are pushed in then the stem will be stuck inside. Whenever using the tool, always keep pointed down when removing stem. And don't foget to remove the stem before putting it away. Surprises like this occur when you forget and it justs screws up your day next time you go to use it. Check the stem of each rivet before inserting into the tool by simply grasping between thumb & forefinger a pulling the stem thru your fingers. If there is a burr on the stem, don't use it or clean off the burr. Hint - the cheapest supplier of these rivets is an automotive paint supply store. Most expensive- car dealer parts dept!
Question:	Does it come with rivets
Answer:	This tool does not come with any rivets. This is only for plastic rivets which are available from many sources and the tool works great.
Question:	What size rivet shaft will this take? My 1/4" rivets have a 5/32" shaft. Thanks
Answer:	"SG19400 Features: -Rivet tool. -Plastic rivets in one stroke without re-gripping. -One hand operation. -All sizes using a single nosepiece." Based on that, it should work with a 5/32" shank. Based on some other internet info, I believe it work with 1/8" to 3/16" shanks.

Product description

The Spitznagel Slimline Plastic Pop Riveter is the perfect solution to pulling rivets in the tightest places. This riveter is one inch tall and requires only two inches clearance to fully pull a plastic rivet. Bumper facia, fender walls and other inaccesible areas no longer need to be taken apart. The Slimline Riveter can reach those tight spaces with ease. Extra collet for 2 different size rivets, 10 rivets included. Used on vehicles such as Chrylser 300, Dodge Magnum, Dodge Charger and Jeeps where plastic rivet clearance is minimal. Designed and patented in the U.S.A. Slim profileGreater accessabilityPulls 2 sizes of rivetsOne handed useOne year warrantyDent Fix DF-CT887 Slimline Plastic Pop Riveter

• Slim profile
• Greater accessibility
• Pulls 2 sizes of rivets
• One handed use

Product description

🍀 Products Detail

◆ Material: Nylon rivets; High quality steel riveter gun with comfortable red rubber handle, black zinc plated; Rivets remover with steel shaft & comfortable handle;



🍀 Sizes:

◆ Rivets: 5mm x 15.8mm, 5mm x 17.2mm, 6.3mm x 25.2mm, and 6.6mm x 17.2mm;

◆ Rivet Gun: 3/16 inch in gripping diameter (hold a 3/16 stem); 0.831 inch in diameter of head; 6 inch in Length; 3.58 inch in handle length, 0.78inch in width length;

◆ Fastener Remover: 8.67 inch in length; 0.2 inch - 0.3 inch in gripping width.



🍀 Package Content

5mm x 15.8mm Plastic Rivet * 10 PCS

5mm x 17.2mm * 10 PCS

6.3mm x 25.2mm * 10 PCS

6.6mm x 17.2mm * 10 PCS

Rivet Gun * 1 PCS

Fastener Remover * 1 PCS



💗 WHY SHALL YOU CHOOSE US? 💗

✤ 1. We prepared a perfect plastic rivets remover hand tools kit for you, which includes almost all parts you need for broken rivets replacing. It will relax your nerves searching for other parts on local stores.



✤ 2. Before selling on the Amazon, we have takens severals tests with the rivets gun. The result proved that the rivets gun itself is sturdy and works great, designed for one hand operation with one-stroke without re-gripping. Perfect for automotive applications such as flexible bumpers, wheel wells, license plate brackets and bumper reinforcements.



✤ 3. The FREE Rivets Puller will be invaluable for you, it is designed with steel shaft & comfortable handle, which is handy for safe metal & plastic clips removal or push rivets.



✤ 4. We have been trying to provide 100% satisfcation shopping experience for every Amazon Customers. So if you come across any issues or confusions before purchase or during use, please feel free to contact me by mail. I will solve the problem for you until satisfaction!

• ★ 1. You Will Get More than What You Pay for --- In this nylon/plastic rivet mounting set hand tool, we prepared not only the plastic riveter gun for you, but also one FREE Rivet Puller and 40 pieces poly rivets with 4 different sizes. It would be a better deal for you, since it can save your money & time of buying other parts for plastic panels securing!
• ★ 2. Strong Compatibility --- It comes with total 40Pcs 4 different sized plastic rivets for replacements, 5mm x 15.8mm, 5mm x 17.2mm, 6.3mm x 25.2mm, and 6.6mm x 17.2mm. Besides, the plastic riveter gun can be used for almostly all automotive applications with different sized plastic rivets such as: securing plastic panels around the fender, bumper, and grill of 2007 Honda Odyssey or 2015 Challenger.
• ★ 3. Quick & Easy to Remove and Replace --- The FREE Rivet Remover can remove the broken clips or push rivets conveniently. Then the plastic rivet is a quick tool to replace broken clips without having to have the specific Honda replacement on hand.
• ★ 4. Ergonomic Design --- Designed for one hand operation with one-stroke without re-gripping. It will not damage painted door panels or easily marred automotive trim. Long reach design allows access in hard-to-reach areas, not accessible by conventional lever type tools.
• ★ 5. FREE Fastener Remover --- The front and rear fenders have one-time use rivets that must be replaced when the panel is removed. Then the rivet removal tool has proved invaluable. It is designed with steel shaft & comfortable handle, which is handy for safe metal & plastic clips removal or push rivets everywhere on a car.

Product description

20pcs × 1/4” (6.3mm) Hole Size.

Panel Range: 9/16”

Black Nylon Mud

Skirt Blind Rivets



20pcs × 5/16” (8mm) Hole Size

Head Diameter: 20mm

Stem Length: 11mm

Black Nylon

Front Fender

Push-Type Retainers



22pcs × 5/16” (8mm) Hole Size

Head Diameter: 20mm

Stem Length: 20mm

Black Nylon

Air Baffle To Under Carriage

Push-Type Retainers



10pcs × 23/64” (9mm) Hole Size

Head Diameter: 18mm

Stem Length: 28mm

Black Nylon

Rear Bumper Cover

Push-Type Retainers



15pcs × 25/64” (10mm) Hole Size

Head Diameter: 20mm

Stem Length: 13mm

Black Nylon

Push-Type Retainers



15pcs × 25/64” (10mm) Hole Size

Head Diameter: 20mm

Stem Length: 18mm

Black Nylon

Push-Type Retainers

• All packed in a plastic container for easy organization and storage.
• 4 hole sizes from 6.3mm(1/4"), 8mm(5/16" ), 9mm(23/64" ), 10mm(25/64" ).
• 6 different push pin rivet for ATV & many brand vehicles.
• Great for Door Trim, Car Fender, Bumper, Side Skirt, Radiator Shield, Splash Shield Retainers

User questions & answers

Question:	Does it work on 2006 Honda Civic lx sedan
Answer:	It worked on my slimline HP
Question:	How do you install one
Answer:	Sorry I can't answer your question. Our tower was making a strange sound, so we took it to Best Buy. The service guy told us the part was inexpensive and that we could do the work ourselves to save us paying them to do it. He was right; we ordered it from amazon, and it was no problem to replace. We didn't have a problem with a lightbulb. Hope you get information you can use!
Question:	Does this work for the under fairing of an 05 Gsxr
Answer:	I am not a technician or a "geek" so I can't answer your question. My advice is to consult HP and see if they can give you a part number for that CPU fan.
Question:	Are these reuseable? I bought a few kits and they are a 1 time fastener
Answer:	My computer is a Pavilion slimline 400-314. Have you taken the fan out to see what size it is? Ours is a small one and Amazon was the only place we could find . Ours is a three wire fan. If it has more wires it won' t fit. ''

Product description

Swivel Slimline Plastic Riveter

• Rotational Head – easily get into hard to reach places
• Slim line Profile – less than 1.75” head and requires only 2.25” clearance for pull
• Interchangeable Tips – 5.0mm and 6.3mm tips add versatility
• Locking Clip – metal clip swings keeps the handles together when not in use for smaller footprint

Product description

Plastic Riveter Set with 40 plastic rivets. Laser Tools have just introduce a plastic pop riveter (part no: 5494) with cushioned grips for comfortable one-handed operation. Plastic pop rivets are often used in applications that require lightweight solutions, have conductivity issues, require ease of installation or require removability. The Laser 5494 has a long reach head for accessibility and the design lets the head accept all the supplied sizes of rivet — there is no need to change the nose piece. 40 rivets are supplied in 4 sizes from 5mm to 6.6mm. Useful for trim applications, a very robust and well made tool that will be useful for both modern and classic cars and in many non-automotive industries. .

• Head accepts all supplied sizes - no need to change nose piece.
• 10 of each rivets 5mmx15.8mm | 5mmx17.2mm | 6.6mmx17.2mm | 6.3mmx25.2mm.
• Long reach head for hard to reach spots215mm x 92mm x 30mm
• One handed operation
• Cushion grips/locking button

Product description

★ ★ Swpeet 41Pcs Poly Rivet Gun Set with 1Pcs Rivet Removal Tool, Poly Rivet Tool for All Plastic Rivets Safe Metal or Plastic Clips Removal ★ ★



WHY CHOOSE US?

√ 1, Ergonomic

▶ Lightweight, designed for one hand operation with one-stroke without re-gripping.

√ 2, Long Reach Design

▶ Allows access in hard-to-reach areas, not accessible by lever type tools.

√ 3, Protects Surface

▶ Won’t damage painted door panels or easily marred automotive trim.

√ 4, Versatile Plastic Rivet Tool

▶ Universal nosepiece in rivet gun for plastic rivets of all sizes.

√ 5, Free Fastener Remover

▶ Steel shaft & convenient handle for safe metal or plastic clips removal.



▲ Package Included:

★ 1Pcs -------------- Rivet Tool

★ 1Pcs -------------- Rivet Removal Tool

★ 10Pcs -------------- 5mm x 15.8mm Rivets

★ 10Pcs -------------- 5mm x 17.2mm Rivets

★ 10Pcs -------------- 6.6mm x 17.2mm Rivets

★ 10Pcs -------------- 6.3mm x 25.2mm Rivets

★ In Total 42Pcs Designed to set all sizes of poly rivets.

• ☛ 1, 【Warm Note 】----- Dear customer, if you encounter plastic rivet gets stuck, you don’t need to forcibly remove the product, just gently push away the handle of the rivet, and the rivet can be easily removed. Poly Rivet Gun Tool Set all sizes of poly rivets perfectly in a single stroke without changing the nosepiece.
• ☛ 2, 【 Ergonomically Designed 】----- Lightweight, designed for one-hand operation with one-stroke without re-gripping, Self-adjusting jaws help set rivets perfectly in a single stroke without re-gripping or prematurely breaking the stem.
• ☛ 3, 【 Versatile Plastic Rivet Tool 】----- Won’t damage painted door panels or easily marred automotive trim, Universal nosepiece in rivet gun for plastic rivets of all sizes. Comes with 40 Polyoxymethylene (POM) rivets that leave an attractive, finished appearance with high strength and stiffness.
• ☛ 4, 【 Rivet Removal Tool 】----- Use the ABN Automotive Door Panel Plastic Fastener Clip Removal Tool, Universal for Cars, Trucks, SUVs, ATVs, and All Vehicles to quickly release door panels and upholstery clips on your vehicle, For easy removal of door panel clips without causing damage.
• ☛ 5, 【 What You Get 】----- In this kit, You will get 1Pcs Plastic Rivet Gun and 40Pcs industrial strength polyoxymethylene (POM) rivets: 10 each of 5mm x 15.8mm, 5mm x 17.2mm, 6.6mm x 17.2mm, and 6.3mm x 25.2mm with 1Pcs Free Fastener Remover Included. In total 42Pcs in a box, can meet all your different Daily needs.

Product description

ApplicationRiveting Handle grip3-1/2 in. Product Height1-3/4 in. Product Length6-1/2 in. Product Width4-5/8 in.

• Ergonomically designed for one-handed operation, this riveter's self-adjusting jaws help set rivets perfectly in a single stroke. You can also set all sizes of rivets without having to remove the nosepiece. The tool ensemble comes with 40 polyoxymethylene (POM) rivets that leave an attractive, finished appearance.
• Ergonomically designed for one-handed operation Provides easy access to confined areas
• Sets all sizes without having to change the nosepiece Will not cause damage to painted or delicate surfaces
• ncludes 40 industrial strength polyoxymethylene (POM) rivets: 10 each of 5mm x 15.8mm, 5mm x 17.2mm, 6.6mm x 17.2mm, and 6.3mm x 25.2mm
• Perfect for fastening door panels and automotive trim Rivet leaves an attractive, finished appearance

User questions & answers

Question:	What is Length of actual rivet gun
Answer:	I have used it on three different sized plastic rivets. The clamping surface and rivet depth sizes were different but all the stems (the part the rivet tool grips) were the same. I have not seen a plastic rivet with a different sized stem. Hope that helps.

• 【 Four-Sizes Rivet Heads 】: 4 interchangeable rivet heads 3/32"(2.4mm), 1/8" (3.2mm), 5/32"(4mm), and 3/16"(4.8mm) are stored on handle. With JUEMEL pop rivet gun you are able to use 4 sizes of rivets for riveting.
• 【 Labour Saving 】: Rotating the adjustment sleeve, the grip distance of the rivet gun will be adjusted.The shorter the distance, the less force it takes to squeeze the riveter. With this labour-saving design, you can complete riveting smoothly regardless of your strength.
• 【 Durable & Solid 】: The rivet gun with a high-strength aluminum body and reinforced carbon steel heat treatment handle, which provides high strength and long service life. Choose JUEMEL, you will have a durable & solid riveting tool.
• 【 Comfortable 】: The rivet gun is ergonomically designed. High-quality PVC-covered grip can anti-slip and provide users with comfort. Your hands will not suffer during riveting.
• 【 Wide Application 】: With JUEMEL rivet gun you can handle three types of rivets: aluminum, steel, and stainless steel rivets. Whether you want to do construction, repair or craft making, you should not miss it.

User questions & answers

Question:	How long are the rivets once they are in place
Answer:	Thry are piched off by the gun and flush with the metal.
Question:	Is this rivet gun easy to squeeze? I can not use my old rivet gun
Answer:	Yes, it's easy to squeeze. Rotating the adjustment sleeve, the grip distance of the rivet gun will be adjusted. The shorter the distance, the less force it takes to squeeze the riveter
Question:	How do I remove a rivet from the gun if it breaks off while the rivet is clamped in the gun
Answer:	Dear customer, You just need to turn the rivet gun head down, shake the rivet gun to pour out the rivet
Question:	A two year warranty is nice, where would I need to take if I had a problem
Answer:	Dear customer, you can contact us at any time through your Amazon order. We will provide you with product repair or replacement services.

Product features

One Hand Operation

Easy to use. Ergonomically design allows single hand operation. Can improve your work efficiency,

Adjustable Effort

Rotating the adjustment sleeve, the grip distance of the rivet gun will be adjusted.This determines the force required to squeeze the rivet

Tool-free to change rivet head

Knurled design rivet heads can be removed tool-free that you can change it easily and quickly.

3-Claw Tighten Design

JUEMEL rivet gun can handle all three types of rivets: aluminum, steel, and stainless steel rivets. Used with different sizes of rivets, it can be perfectly fit your riveting requirements.

4*steel rivets packs( 20pcs each size)

20* 2.4mm rivets；20* 3.2mm rivets；

20* 4.0mm rivets；20* 4.8mm rivets

Sizes of rivet head: 3/32", 1/8", 5/32", 3/16"

Fastening Metal

Furniture Maintenance

Product description

AFA Tooling ergonomic and lightweight river gun for plastic rivets. Designed for one hand operation with one-stroke without re-gripping. Perfect for automotive applications such as flexible bumpers, wheel wells, license plate brackets and bumper reinforcements. Will not damage painted door panels or easily marred automotive trim. Long reach design allows access in hard-to-reach areas, not accessible by conventional lever type tools. Universal nosepiece great for all sizes of plastic rivets leaves an attractive, finished appearance. Free fastener remover included perfect for safe metal or plastic clips removal. Not for use with metal rivets. Specification: steel head & handle; handle grip 3.5”; dimensions: 6.5” x 4.75” x 1.75”. 100% lifetime satisfaction guaranteed.

• ERGONOMIC - Lightweight, designed for one hand operation with one-stroke without re-gripping
• LONG REACH DESIGN - Allows access in hard-to-reach areas, not accessible by lever type tools
• PROTECTS SURFACE - Won’t damage painted door panels or easily marred automotive trim
• VERSATILE PLASTIC RIVET TOOL - Universal nosepiece in rivet gun for plastic rivets of all sizes
• FREE FASTENER REMOVER - Steel shaft & convenient handle for safe metal or plastic clips removal

User questions & answers

Question:	what size plastic rivets heads does it come with? Will it support 3/16 & 1/4 stems
Answer:	Yes it does. One to press the button on drill and one to hold the metal piece so the blue thing doesn't spin with the drill. Hope the makes sense.
Question:	what type of rivets are you able to usee with this
Answer:	Dear customer, Thanks for your enquiry. We are sorry to tell you that we don't have drill bit size for 1/4 ×"5/8, gap .501-.625. Best regards, YKWOW
Question:	What is largest size plastic rivet it will handle
Answer:	Dear customer, Thanks for your inquiry. The Cordless Rivet Gun needs 2 hands to use. Hope this can be helpful. Best regards, YWKOW
Question:	How does this come apart? The first rivet i tried to put in snapped off inside and i cant get it out
Answer:	It works great on 3/16 steel rivets, I am sure it works great on 3/32 1/8 and 5/32. Just make sure to change the die to match the rivet size.

• 🛠4 Interchangeable Rivet Heads: The 4 interchangeable heads 3/32"(2.4mm), 1/8"(3.2mm), 5/32(4mm) and 3/16"(4.8mm) are color coded and stored on handle for easy exchanging, And each size is equipped with 50 pcs rivets. This manual rivet gun provides you with everything when you start riveting.
• 🛠Sturdy Material: Three pieces rabbit Jaw Co-Mo alloy steel structure, thickening and heat treated carbon structure steel handle and high quality aluminum alloy body increase the rivet gun body strength and prolong the lifecycle.
• 🛠Ergonomic Design : Pop rivet gun adopts ergonomic design allows a single hand to make work easier and save more than 20% effort. It features knurled rivet heads can be removed tool-free for rivet-head change or maintenance easily.
• 🛠What You Get : This single hand riveter set includes: 1*Rivet Gun, 4*Aluminum Rivets Pack( 50pcs each size), 1*Sturdy BMC Case, 1*User Manual, Worry-Free-2-Year-Warranty. Any questions, please share with us and we will solve all the problems for you.
• 🛠Wide Application : Our professional rivet tool is perfect for securely fastening metal and heavy fabric in different construction and repair applications, can be used for any occasion. Such as automotive, aviation, railway, elevator, instrument and furniture.

User questions & answers

Question:	Can this be used with iron and stainless steel rivets as well
Answer:	Yes, it can, this professional riveter can handle all three types of rivets: aluminum, steel, and stainless steel rivets.
Question:	Are larger size rivet heads available
Answer:	The tool comes with 4 different size heads
Question:	Does come with a box
Answer:	Yes ，it comes with a BMC case .
Question:	What is the four interchangable color-coded heads size
Answer:	They are 3/32"(2.4mm, Red), 1/8" (3.2mm, green), 5/32"(4mm,blue), and 3/16"(4.8mm,yellow) which are stored on handle and provide you with everything you need to start riveting

Product features

One Hand Operation

Easy to use. Thick PVC grips, anti-slip handle,and ergonomic design allows single hand operation, it can improves your work efficiency.

Adjustable Effort

Rotating the adjustment sleeve, the grip distance of the rivet gun will be adjusted. The shorter the distance, the less force it takes to squeeze the riveter.

Tool-free to Change Rivet Head

Knurled design rivet heads can be removed tool-free so that you can change them easily and quickly.

MEET YOUR DIFFERENT PROJECT NEEDS

• DURABLE & STURDY: This rivet gun is made from thick carbon steel with heat-treated finish, corrosion resistant, durable & withstanding high work strength. The rivet also can be firmly seized and held due to the internal three-jaw steel chuck structure.
• 5 REPLACEABLE NOSEPIECE & 50PCS RIVETS: The rivet gun has 5pcs nosepieces at size 3/32"(2.4mm), 1/8"(3.2mm), 5/32"(4.0mm), 3/16"(4.8mm), 1/4"(6.4mm) attached on grips which can be manually interchanged easily and quickly. This rivet tool set comes with 50pcs aluminum rivets of 5 different sizes.
• FITTING 3 MATEIRIALS & 5 SIZES RIVETS: This hand riveter can handle 3 materials of rivets: aluminum, steel and stainless steel rivets. It can fitting 5 different sizes of rivets to accommodate variety wild range of riveting jobs, great for both outdoor and home projects.The rivet must be the same size as the nozzle. Otherwise the rivet will be jammed.
• NONSLIP GRIPS & COMPACT SIZE: The arc-shaped anti-slip handle is ergonomically designed to save effort, make riveting easy and quickly, with no need for a repeated laborious operation on the rivet gun handle. 10 inch body makes work easier in narrow space or hard-to-reach places, such as gutters, furniture, drawer, and small case. And it is easy to carry and store.
• WIDLY USED: The rivet gun is perfect for securely fastening metal and heavy fabric in different construction and repair applications. It is widely used for both indoor and outdoor projects, like automotive, aviation, railway, elevator, instrument, furniture, doors, DIY tasks, etc.

Product description

Description:



Self-adjusting jaws help set rivets perfectly in a single stroke without re-gripping or prematurely breaking the stem

Ergonomically designed for one-handed operation

Provides easy access to confined areas

Sets all sizes without changing the nose-piece

Will not cause damage to painted or delicate surfaces

Great for fastening door panels and automotive trim

Rivet leaves an attractive, finished appearance

Includes 40 assorted industrial strength polyoxymethylene (POM) rivets:

10 - 5mm x 15.8mm

10 - 5mm x 17.2mm

10 - 6.6mm x 17.2mm

10 - 6.3mm x 25.2mm

Steel Head & Handle

Handle Grip: 3 1/2"

• Designed for one-handed operation, self-adjusting jaws help set rivets perfectly in a single stroke.
• Can also set all sizes of rivets without having to remove the nosepiece.
• Will not cause damage to painted or delicate surfaces
• Includes 40 industrial strength polyoxymethylene (POM) rivets: 10 each of 5mm x 15.8mm, 5mm x 17.2mm, 6.6mm x 17.2mm, and 6.3mm x 25.2mm
• Perfect for fastening door panels and automotive trim Rivet leaves an attractive, finished appearance

Product description

Feature:

Designed for one-handed operation Provides easy access to confined areas

This riveter's self-adjusting jaws help set rivets perfectly in a single stroke without regrouping or prematurely breaking the stem

Rivet leaves a clean and finished appearance.Will not cause damage to painted or delicate surfaces.

Perfect for fastening door panels and automotive trim



Package includes:

A Rivet Tool

40 Poly Rivets

10 - 5mm x 15.8mm

10 - 5mm x 17.2mm

10 - 6.6mm x 17.2mm

10 - 6.3mm x 25.2mm

• Designed for one-handed operation. Provides easy access to confined areas
• Sets all sizes without having to change the nose piece. 10 each of 5mm x 15.8 mm, 5 mm x 17.2 mm, 6.6 mm x 17.2mm, and 6.3mm x 25.2 mm
• This riveter's self-adjusting jaws help set rivets perfectly in a single stroke without regrouping or prematurely breaking the stem
• Rivet leaves a clean and finished appearance.Will not cause damage to painted or delicate surfaces.
• Perfect for fastening door panels and automotive trim