8 best kegworks bottle caps

Product description

Compliment your wall mounted bottle opener! Install one of these handy cap catchers underneath to keep the caps from falling to the floor. Made of stainless steel. In stock and ready to ship. Features: Made of 1mm thick stainless steel. Predrilled mounting holes. Specs: Dimensions: 3 1/2"H x 5 1/2"W x 2 1/2"D. Includes: Mounting screws.

• 1mm thick stainless steel.
• Easily lifts up and out to empty.
• Dimensions: 3 1/2"H x 5 1/2"W x 2 1/2"D
• Mounting hole is predrilled on the back.
• Easily lifts up and out to empty.

User questions & answers

Question:	Does anyone know if this can this be mounted to a brick? I have a brick surround for my built in grill that I would like to mount this to
Answer:	it can be mounted to any surface
Question:	roughly how many bottle caps will this hold
Answer:	A question of this nature is hard to give an exact number but if we had to estimate, we could see this holding at least 75 -100 bottle caps
Question:	Does anyone know how far apart the mounting holes are? I want to mount this on a post on our deck
Answer:	The mounting holes are 2 1/2-inches (center to center) apart.
Question:	Are there drain holes on the bottom? We are thinking of using this on our outdoor bbq and would not want it to fill up with rain
Answer:	No drain holes. If installed indoors you don't want any spilled liquid to run out onto floor, if outside you could easily drill holes.
Question:	What is the actual size of the 18 x 18 x 1 & 25 x 25 x
Answer:	I purchased 20x20x1 and actual measurements are 19 1/2 x 19 1/2 x 3/4. Hope this helps.

Product features

AFB Silver Merv 8

Other High-Quality Pleated Filters

With 12 pleats per foot & beverage board frames our filters have greater surface area to trap more airborne particles and withstand exposure to moisture/dampness.

Product description

Winco has been a trusted and reliable brand in professional kitchens for over 20 years. Our commercial lines of products, ranging from tabletop to kitchen utensils to food preparation supplies, are used by all foodservice and hospitality industry experts worldwide. While our products are made to meet the high demands of a restaurant kitchen, we are excited to now make them available for the serious home chef.

• Winco products are made to meet the high demands of a kitchen
• Trusted and reliable
• Winco products range from tabletop to kitchen utensils to food preparation supplies
• Winco products are used by all foodservice and hospitality industry experts worldwide
• Good quality product

User questions & answers

Question:	What color is this item
Answer:	Gray.
Question:	There's not much information as to what this is made from. Do magnets stick to it
Answer:	Magnets do not stick to mine.
Question:	What are the dimensions
Answer:	The back with the keyhole mounting hole is 13 1/2" high, the front is 10", width of unit is 5 1/2" and the depth (front to back) is 3 1/4" the opening for the caps is 3 1/4" x 5 1/2" and will hold a lot of caps.
Question:	What are the dimensions of this catcher
Answer:	5 3/8" wide (laft to Right as in picture above, 3 3/8" out from wall, catch can is 10" deep and the plate on the back with the hole to hang it is 3 3/4" tall from the catch can.

Product features

About us

Since our beginnings in 1992, we have been dedicated to providing a wide range of quality products with chefs and restaurateurs in mind. We deliver quality food service products for busy kitchens that enhance food preparation, cooking and dining experiences for operators and patrons.

Winco was established on the idea that a small wares and equipment supplier must be able to deliver quality products as well as partnership services, and this remains the company’s foundation. These joint strengths, combined with the passion for food service, are why Winco continues to be recognized as a leading brand in the industry.

Product description

Black Aluminum Cap Catcher for wall mount stationary bottle openers. Starr brand product. Traditional metal design. New in gift box as shown. Screws included. Measures 3.5 x 5.25 x 2.5 inches. Perfect complement for the Starr X opener!

• Black Aluminum Cap Catcher

User questions & answers

Question:	Are there pre-drilled holes in the bottom? Looking at an outdoor setting and dont want it filling with rainwater
Answer:	Yes there are 4 small pre-drilled holes near each corner on the bottom, so it will not fill with water.
Question:	What are the exact measurements
Answer:	The top measures 5.5 inches by 2.5 inches and it is 3.5 inches deep. Matt
Question:	The title states "black powder coated stainless steel;" however, a description bullet states "solid aluminum construction" . . . which is it
Answer:	It appears to be aluminum that has been powder coated. It's made very well.
Question:	what are the dimensions of the black aluminum cap catcher
Answer:	Perfect example of "ask four different people, get four different answers". Good thing the dimensions are included in the product description.

Product description

Our Wall Mounted Stainless Steel Beer Bottle Cap Catcher offer an easy place to store all you bottle caps.

* The Cap Catcher is matte stainless steel finish.

* Great for outdoor locations and looks awesome indoors too.

* Mount bottle cap Catcher about 7 inches below bottle opener for best results.

* Catcher holds about 75 caps and is removable for emptying and washing.

* Comes in a great gift box.

Perfect for kitchen, garage, bar, by the pool or out at the dock. Specifically designed for outdoor use (although also beautiful indoors), the Stainless Steel Wall-Mount Bottle Opener will never rust, tarnish, or corrode. Install on any wall, cabana, post or tree, and begin opening bottles with style! Matte finish stainless steel catcher measures H 3 5/8 x W 5 5/8 x D 2 5/8 inches.

• ➤ LIFETIME GUARANTEE: Yes, a life time guarantee from rust, tarnishing, corrosion with a 30 day A to Z Satisfaction Guarantee.
• ➤ BEST STAINLESS STEEL Wall Mount Cap Catcher with matte finish is perfect bottle cap catcher for near your bar, on your outdoor deck, swimming pool area, or in your man cave and comes in a great gift box.
• ➤ EASY TO INSTALL becasue when you buy you get the included Mounting screws FREE that are included and easy install.
• ➤ CLEANUP IS EASY since it is Easy To Remove For Cleaning will collect your caps and can easily be removed for cap disposal. HOLD THE CAPS FOR easy disposal, our Catcher Holds About 75 Beer or Soda Caps. You enjoy this simple Cap catcher as a companion to your bottle cap opener.
• ➤ MOUNTING LOCATION Specifically designed for outdoor use but is also beautiful indoors, the Stainless Steel Wall-Mount Bottle Opener will never rust or tarnish. Install on any wall, cabana, post or tree, and begin opening bottles with style! One can install our bottle cap catcher anywhere both inside and outside with two screws. Great for outdoor locations and looks awesome indoors too. Perfect for kitchen, garage, bar, by the pool or out at the dock.

User questions & answers

Question:	How far apart are the mounting holes
Answer:	The Wall Mounted 304 Stainless Steel Catcher has the mount holes 2.75 inches apart.
Question:	Does it have drain holes in the bottom? I want to use outdoors
Answer:	No, The stainless steel wall mounted Cap catcher does not have any drain holes but would be easy to drill some yourself. However, is is not watertight so I am sure the water would drain out.

Product description

-Tamper Water Bottle Caps Make Your Bottles With Un-Opened Look, New Feature Include The Pop Up, Push-Pull for Most Of The Sports drinking Bottles in the Market 

-Will Fit Most Of The 16oz Water Bottles, And Soda Bottles 

-Sneak Alcohol, Rum Whiskey To Concert, Cruise, Stadium, Football Games 

-FDA Grade 28mm Water Caps, Perfect for Restaurant, Home Brewing, Home Made Juices As Well 

-Bag of 10. Our Brand is Trademarked And This Product Is Solely Distributed By us, and our authorized dealers 

• Tamper Water Bottle Caps Make Your Bottles With Un-Opened Look, New Feature Include The Pop Up, Push-Pull for Most Of The Sports drinking Bottles in the Market
• Will Fit Most Of The 16oz Water Bottles, And Soda Bottles
• Sneak Alcohol, Rum Whiskey To Concert, Cruise, Stadium, Football Games
• FDA Grade 28mm Water Caps, Perfect for Restaurant, Home Brewing, Home Made Juices As Well

User questions & answers

Question:	Does the tops fit the small Gatorade bottles
Answer:	These lids are 28mm, it will fit most of the soda and water bottles, but not sure if it will fit the gatorade
Question:	What is the "28mm" dimension referring to? Outside diameter of cap or inside diameter? How are the "Threads" involved
Answer:	28mm refers to the inside diameter, the thread are for the standard soda/ water bottles
Question:	Does this fit a Smart Water bottle
Answer:	Yes. They fit. You have to cut off the Smart Water bottle’s bottom ring thingy but then the white caps just screw on like normal.
Question:	Does this fit Brita soft squeeze water bottles
Answer:	No it didn’t fit mine. It want a tight enough seal so it leaked some.

Product description

Fits most bottles.

• Fits Most Bottles - Tapered bottom will fit snugly on most bottle sizes from beer to liquor bottles.
• Keep Liquor Clean - Keeps out bugs, dust, beach sand, debris, and reduces evaporation of your alcohol.
• Fits Over Pourer Spouts - Fits over most pourer spouts to keep them clean.
• Easy To Use - Easy to place on and take off.
• Perfect for Outdoor Use - Keeps bugs and debris out of your beer and wine bottles while outdoors both at the beach and in your backyard.

User questions & answers

Question:	Can these fit on hennessy bottles as a topper
Answer:	I only recommend these for covering pour spouts. It’s not very secure To put on an open bottle or tight enough to keep fresh. Great for bars to prevent bugs or dust getting into open pour spouts.
Question:	What is the diameter? I'm trying to fit on my teapot spout
Answer:	It fits over a 750ml liquor bottle. Figure it out from that.
Question:	What is the proper method for cleaning these (can they go through a dishwasher
Answer:	Not sure, we soak them in the “blue water” daily
Question:	Can these fit on hennessy bottles as a topper
Answer:	Over the pourer, they are good for fruit flies

• NEVER GO FLAT AGAIN: While traditional growlers will go flat after only a single pour, this mini keg will keep your beer fresh for up to 2 months by keeping the contents vacuum-pressured. You will never have to worry about the quality of your drink again!
• DETACHABLE REGULATOR & SPOUT: The design of growler allows you to detach both the regulator, spout and faucet while keeping keg contents under pressure for storage. Our upgraded regulator can save 35% of Co2 compared to standard model. It is more precise than all other mini regulators and ensures that you can monitor the PSI and adjust the pressure from the regulator gauge.
• COMPACT & LIGHTWEIGHT: Capable of holding up to 175oz, the barrel is light enough to carry around but will still satisfy any beer-lover with its large capacity. This keg’s size makes it incredibly easy to transport, especially to outdoor and summer events.
• CERTIFIED FOOD-GRADE STAINLESS STEEL: Every single part of the faucet distributor kit is made of food-grade 304 type stainless steel to maintain a clean and bacteria-free environment for your beer. This material also provides a robust, long-lasting build.
• JUST ADD A CO2 CARTRIDGE: The only thing you need to get your barrel up and running is a CO2 cartridge.Threaded CO2 Cartridge System (3/8" CO2 Cartridge) - CO2 CARTRIDGE NOT INCLUDED!

User questions & answers

Question:	Were I can buy parts for the faucet well is one small handle on the side of the faucet
Answer:	Please restate your question in english.
Question:	Can you connect the tap to a hose and to the growler for different setup
Answer:	The CO2 tap can be piped to a larger source if you have the right fittings. Is that the tap you meant?
Question:	I assume I can connect my regulator and hose to the systen if I wanted to make nitro cold brew coffee
Answer:	You can if you have the right fittings. That is the problem I had to solve between the internet and Home Depot for forced carbonation. What kind of a container does your nitrogen come in?
Question:	How easy is it to hook up CO2 from an external hose? I'm looking to use this both as a means of a closed transfer to bottling and as a travel growler
Answer:	I recommend that you consider using the refillable bottles used by paintballers. There is a conversion valve available on line. CO2 refills at your local paintball store are cheap.
Question:	What country is this manufactured in
Answer:	We responsibly source the LovIT Growler in China-Just like Klean Kanteen, Miir, Stanley, Kegworks, and just about all other stainless steel growlers available on Amazon. We would LovIT if we could source from the U.S.! Unfortunately, we haven't been able to find a manufacturing partner that has the same quality and price point.With that said, we ensure the materials and operations involved in the manufacture of all our products exceed acceptable standards for quality and safety, fair labor, ethical business practices, and environmental responsibility.
Question:	how big is the hole opening
Answer:	It's about 1 3/4".
Question:	Can this be used with counter pressure CO2 Refill systems
Answer:	It will vary on the type of counter pressure filler. You will need to get the appropriate sized bung to fit the opening that will attach to the counter pressure filler. If the filler has a bung that can be removed and replaced it should work.
Question:	Can this bottle be used for the secondary fermentation of homebrew
Answer:	The seal is tight, so bottle conditioning in this would work fine. It could be used as a secondary vessel if you can fit it with an airlock, but the size of the growler makes this pretty inefficient for that purpose, assuming that you would want to transfer again.
Question:	Is the dropper made of glass? Same Q for you cobalt bitters glass bottle
Answer:	The dropper with the Cocktail Bitters bottle is glass, I can not respond concerning the Cobalt Bitters bottle.

Product features

Premier Tap System

• Heay Ducty Co2 Regulator: Features aluminum body, small and delicate design make it use in many portable application.Requires 3/8" THREADED CO2 cartridges.
• Energy Saving and Accurate(0-30PSI): Can save 35% of Co2 compared to standard model.It is more precise than all other mini regulators and provides stable pressure.
• Adjustable Flow Control Faucet: Features a Flow Control Handle on the side of the faucet, which can adjust restriction for hard to pour brands or to slow the pour for sampler glasses.​

SS304 175OZ/5L Grolwer

• Durable Food Grade SS304: Keep your beverage fresh, cold and carbonated longer.
• Compared with glass growler, there is no need to worry about breaking it.
• Travel cap and portable handle make it easier to store and carry.
• Actual Size is about 175 OZ.

What's in the box?

1 × 175OZ Growler

1 × Travel Cap

1 × Heavy Duty Co2 Rgulator

1 × Adapter

1 × Adjustable Flow Control Faucet

1 × Removable Handle

1 × Dispenser

1 × Food Grade Hose

1 × English Manual

Product description

These growler caps can restore your favorite beer container back to working order in no time. Features: Fits most 1/2 gallon sized growlers. Designed with a foam layer inside for a better seal. Specifications- diameter: 1 1/2".

• Fits most 1/2 gallon sized growlers
• Has a foam layer inside the cap for a better seal
• Great to have on hand
• Diameter: 1-1/2"

User questions & answers

Question:	Does the foam wear out in time? How do they hold up with repeated use? Or if used to seal a bottle with hot beverage? Thanks
Answer:	The foam doesn't wear out that i noticed. One problem though is they do rust pretty fast. Never used it with a hot beverage.
Question:	What is the thread pattern on these caps
Answer:	same as the regular growler and the grenade
Question:	do these fit boston round growlettes
Answer:	There is only one, even though the description looks like there are multiples. It fits most growlers but you would be better off going to a beer supply store and getting these for 50 cents each (they can be used a few times, but not more than 4) rather than spending $2.44 for one.
Question:	If you buy several, do you pay the full shipping price on each
Answer:	Amazon combines shipping as you add more items to your cart. There are also listings on Amazon for a pack of 38mm metal caps, which is the same size as these.