10 best beverage spigot

• Universal Fit: Oak Leaf Beverage Dispenser Replacement Spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick.
• Food Safe & Long Lasting: Constructed of lead-free food grade and rustproof 304 stainless steel for a safe and long-lasting use; premium silicone gaskets fit snugly to prevent leaks and spills.
• Versatile: Oak Leaf Spigots works for most self-serve and traditional beverage service. Ideal for dispensing your favorite drinks, juice, iced tea, water, wine, etc. Polished spigot matches most dispensers for a classic look.
• Easy Installation & Steady Flow: Rinse thoroughly by clean water before use. For easy assembly use a ¾ inch wrench to tighten the nut, do not over-tighten. Strong and easy-to-use lever ensures smooth and steady dispensing every time.
• Friendly Customer Service: We have a commitment to every buyer 100% satisfaction. After all, we are customers, too. So if you have any problems about our Oak Leaf Beverage Dispenser Replacement Spigot, just contact us, we’ll settle the issue according to your willingness.

User questions & answers

Question:	Can you put this in say a watermelon that has been hollowed nad filled w/ bev
Answer:	Hello Valued Customer, we appreciate your question. No, our Cordinate Designer Tabletop Switch is not designed to be used with your feet. If you have any further questions, please don’t hesitate to respond or give us a call between the hours of 7:00 AM – 8:00 PM Central Standard Time, Monday thru Friday at 1-800-654-8483. Thank you.
Question:	Does the replacement spigot come with instructions
Answer:	Hi John, thank you for your question. No, our Cordinate Designer Switch Plug does not have an indicator that displays if the switch is on or off. If you have any further questions, please don’t hesitate to respond or give us a call between the hours of 7:00 AM – 8:00 PM Central Standard Time, Monday thru Friday at 1-800-654-8483. Thank you.
Question:	What grade of stainless steel is this
Answer:	Hi r_phillips09, we appreciate your question. Our Cordinate Designer Switch Plug is not UL listed, it is ETL listed and conforms to UL standards. If you have any further questions, please don’t hesitate to respond or give us a call between the hours of 7:00 AM – 8:00 PM Central Standard Time, Monday thru Friday at 1-800-654-8483. Thank you.
Question:	What material is the gasket made of
Answer:	You can install it in a bathroom or kitchen, as long as the bathroom or kitchen has GFCI protected circuits. If you have further questions please contact us at [email protected] Best REgards, TopGreener Inc.

Product features

Keep your dispensers running more efficiently with Oak Leaf Spigot for Drink Dispenser!

Corrosion Resistant & Food Grade Material

Made of food grade 304 stainless steel, this Jar Spigot resists rust for a safe use. Its metal lever is both strong and easy to use, which allows you to dispense your beverage steadily and smoothly without the need to hold the lever. Offering strength and durability, it makes a safer alternative to the plastic one.

Step 1

Hold a spigot, place a stainless washer and then a silicone gasket into it. Thread it through your beverage dispenser.

Step 2

Then place a silicone gasket and a washer on the other side.

Step 3

Screw the nut.

Step 4

Tighten the nut and done.

Oak Leaf 2-Pack Stainless Steel Spigots

Measuring 3.9" L x 2.5" H, the Beverage Dispenser Spigot fits a dispenser opening measuring 5/8 inches in diameter and up to 11/16 inches in thickness, including Big Berkey Water Filter and ZeroWater Dispenser. Whether you are throwing a barbecue or a bridal shower, you could always use this dispenser spigot with confidence to serve homemade drinks like lemonade, iced tea and juice. You could also it at self-serve beverage stations, traditional beverage service operations and other commercial settings.

Specifications

• Dimension: 3.9" L x 2.5" H
• Fits Opening with:
• Diameter: 5/8 inches (16 mm)
• Thickness: within 11/16 inches (17 mm)
• Material: 304 Stainless Steel + Silicone

• Quick Installation: This Beverage Dispenser Replacement Spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick.
• Multi-Function – The DozyAnt Beverage Dispenser Replacement Faucet is great for Dispensing Tea, wine, water, juices and other beverage. Fits all Berkey Stainless Steel models. Will not fit Berkey Light.
• Premium Quality –The DozyAnt Beverage Dispenser Replacement Spigot is made of fine solid stainless steel, no lead included in the material, surprisingly durable and corrosive-resistant, good for health and with a long life with proper appliance.
• Notice - Wash and tear off the white protective films on the washers before use. If necessary, use 3/4 inch wrench for the nut, do not over-tighten. Rinse thoroughly by clean water with handle in partial open position (45 degree turn) after the usage. If used for sugary drink, we suggest removing the spigot from the dispenser and clean thoroughly.
• Warranty & Friendly Customer Service: We have a commitment to every buyer 100% satisfaction. After all, we are customers, too. So if you have any problems about our DozyAnt Beverage Dispenser Replace Spigot, just contact us, we will settle the issue according to your willingness.

User questions & answers

Question:	Wil this spigot work with the Old Nantucet 2 gallon drink dispenser
Answer:	Looking at the dispenser, I'd give a solid yes. They're all pretty standard. If it doesn't, you can always return, but I think you're good to go with this.
Question:	Will this work for thicker liquids
Answer:	Probably will flow almost any consumable liquid, however dispensing liquids with higher viscosity will directly affect the flow rate.
Question:	What is the length (not diameter) of the threaded shaft? I have an igloo cooler, with a wall much thicker than the glass container this is made to fit
Answer:	The Amazon seller has included a schematic drawing of the spigot that shows the allowable thickness of the container to be 11/16 inch or 17mm.
Question:	are all parts (washers, nuts) 304 stainless steel
Answer:	the spigot and nut seem to be made of stainless steel. The washers are not so as to create a tight seal, silicone, rubber maybe. They have cover plates that are stainless steel colored but may be some sort of other metal. Assembled it looks very nice and pours well.

Product description

Push Style Spigot for Beverage Dispenser Carafe, Replacement Lever Pour Spout for Beverage Dispenser

Get the party pouring!

With Cornucopia Brands beverage dispenser spigot, you control the flow! All it takes is a quick flick of the lever style handle for an easy drink refill, or you can lock the spigot open for fast drainage (pull spigot straight up)!

The only major difference between stainless steel spigots and our high quality plastic is the cost savings! Our spigot's attractive design, sleek finish, and superior performance is comparable to stainless steel, but at the lower cost of plastic!

Got a leaky or faulty dispenser faucet? Our spigots make the ideal replacement! Installation is a breeze, and all of the necessary hardware is included (spigot, gasket, nut)! Note: all components of our spigot and corresponding hardware are made from food safe plastics!

Kombucha continuous brewing systems too! Remember, SCOBY does not like metal, with our spigot, you can ensure that no metal comes in contact with your kombucha brewing setup.

• ✓ FOOD SAFE- Made of high quality plastics, our spigots are food and beverage safe.
• ✓ SLEEK & AFFORDABLE! - The only major difference between plastic and stainless steel spigots is the massive savings! Our plastic spigot has the attractive design and performance of stainless steel, but at the price of plastic!
• ✓ LOCK OPEN LEVER! - Get the party pouring! You control the flow with our lever style handle, or you can lock the handle open for easy draining!
• ✓ SIZE: threaded portion (back) is .65 inches diameter (16.4 millimeters)
• ✓ ALL NECESSARY HARDWARE INCLUDED! - Our easy to install spigot comes with all of the necessary hardware, including spigot, large o-ring, and plastic installation nut. All parts of spigot and hardware are made of durable, food safe plastics.

User questions & answers

Question:	Does this fit an acrylic dispenser or glass
Answer:	Glass is what I have, and it fit perfect.
Question:	Will this work on a plastic container
Answer:	Yes, it is working with it. Thanks,
Question:	what is the diameter of the opening? The hole in my beverage dispenser is 5/8 inch
Answer:	I just received it today and it does not fit the 5/8 opening on my dispenser. I am returning it.
Question:	Would this work in a watermelon
Answer:	Probably...if you tightened the nut tight enough, with the washers, to avoid leaking

Product features

Cornucopia Brands Replacement Push Style Spigot -- Choose From 1-Pack or 2-Pack

Features

• Food safe plastic and silicone parts, bpa-free
• Includes spigot, nut, and two silicone gaskets (one for interior seal and one for exterior seal)
• Threaded end 16.4mm (5/8 inches) by 1 1/8 inch long; width at outside of threads .64 in / 16.25 mm (measured with calipers)
• Gasket diameter 1 1/8 inch (hole 5/8 inch), nut interior diameter .61 inch
• Spout mouth diameter 6mm (where liquid comes out), intake diameter 9mm
• Spigot locks open for hands free dispensing / free flow
• Color: Silver, entire exterior of spigot is chrome coated
• The top of the spigot can be unscrewed to access the interior [to clean]
• Full dimensions: 3.2 inches long; height of spigot when closed 3 inches, height when locked open 3.5 inches

Installation and Tips

• Insert spigot with outer gasket on exterior, add interior gasket and tighten with nut
• When installing in glass, don't screw the nut too tightly as you can crack your glass
• Test with a some water to make sure your gaskets and nut are tight enough to prevent leaks
• Use a non-abrasive sponge or cleaner when cleaning the exterior of your spigot to avoid scratching it
• You can unscrew the top to wash the interior

Customer Usage Examples

Customers report using these with . . .

Various glass mason jar beverage dispensers or gallon dispensers

Iced tea dispenser

Plastic water dispensers

Ceramic water dispensers

Stainless steel water dispensers

Insulated beverage dispensers

Always measure your hole and make sure it will fit!

Product description

DOZYANT Superior Quality Stainless Steel Beverage Dispenser Replacement Spigot is designed to replace the cheap, easy to break and leaky plastic spigot of drink dispenser, beverage dispenser jar or sun tea jar. Our spigots look elegant, feel solid, and last a lifetime(backed up by our life time warranty), perfect for Beverage Dispenser Carafe



A must have! You can't beat the quality of a solid stainless steel beverage dispenser

- Easy to Install and Use - Highest Quality Food Grade 304 Stainless Steel Spigot - Not Rust,NO Pb & NO Lead.



Basic Specification

Material: Food Grade 304 Stainless steel

Thread Pitch: 1.25MM

Size: as picture shows

Color: Silver

Durable stainless steel spigot makes serving easy and heavy duty construction is perfect for any food service application. This is the Best Solid Stainless Steel Beverage Replacement Spigot for Water, Cold Beverages, Beer,Juices, and Kombucha Tea.



FITS:

※ALL Stainless Steel BERKEY SYSTEMS:

·Travel Berkey

·Big Berkey

·Royal Berkey

·Imperial Berkey

·Crown Berkey

※All Stainless Steel SYSTEMS

※All other beverage dispensers with a 5/8 -3/4" (16-19mm) Spigot opening.



More, this Replacement Spigot is Backed by a Lifetime No-Hassle Free Replacement Guarantee!



Click the "ADD TO CART" button at the Top of this Page, Save big and enjoy it now!

• Quick Installation: This Beverage Dispenser Replacement Spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick.
• Multi-Function – The DOZYANT Beverage Dispenser Replacement Faucet is great for Dispensing Tea, wine, water, juices and other beverage. Fits all Berkey Stainless Steel models. Will not fit Berkey Light.
• Premium Quality –The DOZYANT Beverage Dispenser Replacement Spigot is made of fine solid stainless steel, no lead included in the material, surprisingly durable and corrosive-resistant, good for health and with a long life with proper appliance.
• Notice - Wash and tear off the white protective films on the washers before use. If necessary, use 3/4 inch wrench for the nut, do not over-tighten. Rinse thoroughly by clean water with handle in partial open position (45 degree turn) after the usage. If used for sugary drink, we suggest removing the spigot from the dispenser and clean thoroughly.
• Warranty & Friendly Customer Service: We have a commitment to every buyer 100% satisfaction. After all, we are customers, too. So if you have any problems about our DOZYANT Beverage Dispenser Replace Spigot, just contact us, we will settle the issue according to your willingness.

• FIRST ON AMAZON: Launched on Mar 11, 2014, Stainless Works®(Registered Trademark of OLDEGG Innovations, LLC, CT, USA) is the first brand for stainless steel spigot on Amazon.
• SOLID 304 STAINLESS STEEL CONSTRUCTION: No Lead, Acid Resistant. Great for Dispensing Tea, Beverage, Vinegar or Wine.
• BEST FLOW RATE: Quarter-Turn Stainless Ball Valve, 4 Seconds Per Cup. First Picture in Open Position, Turn Right to Close.
• UNIVERSAL FIT: Needs 5/8 inch or 16mm diameter opening to install. For flat surface, can fit up to 1 inch opening.
• LIFETIME WARRANTY against leak or break: Backed by OLDEGG INNOVATIONS, LLC, Connecticut, USA, the ONLY Spigot you need to buy

User questions & answers

Question:	Is this spigot LEAD Free
Answer:	Yes. Our spigot is lead FREE. Lead is NOT an ingredient for stainless steel, unlike brass.
Question:	Does this fit the Royal Berkey
Answer:	YES THIS FITS MY ROYAL BERKEY...Very easy to install. You've got to get one!!! This for all who did not want to take apart & measure or like me who doesn't measure well!
Question:	Is this spigot made of food-grade stainless steel
Answer:	Hi, it's made of 18/8 stainless steel, one of the two most common grades of stainless steel(18/8, 18/10) used for food preparation and dining,
Question:	Is this made in the USA
Answer:	China.

Product description

PERFECT SIZE: 3.6''* 2.6''; Weight: 1OZ; Valve seat diameter: 0.7 inch; This product fit Berkey and other Gravity Filter systems.

FOOD SAFE:The spigot is made completely from Food Grade Plastic, so no dangerous chemicals will leach into your beverages.

ALL HARDWARE INCLUDED:Our easy to install spigot comes with all of the necessary hardware, including 4 spigots,rubber waterproof washers, large plastic washers, and plastic installation nut.

EASY TO INSTALL: You don't need installation work, just need 0.7 inch or 18mm diameter opening to install. Even people who are weak can be easily installed.

FRIENDLY CUSTOMER SERVICE: We have a commitment to every buyer 100% satisfaction. if you have any problems, just contact us, we will settle the issue according to your willingness

• PERFECT SIZE: 3.6''* 2.6''; Weight: 1OZ; Valve seat diameter: 0.7 inch; This product fit Berkey and other Gravity Filter systems.
• FOOD SAFE:The spigot is made completely from Food Grade Plastic, so no dangerous chemicals will leach into your beverages.
• ALL HARDWARE INCLUDED:Our easy to install spigot comes with all of the necessary hardware, including 4 spigots,rubber waterproof washers, large plastic washers, and plastic installation nut.
• EASY TO INSTALL: You don't need installation work, just need 0.7 inch or 18mm diameter opening to install. Even people who are weak can be easily installed.
• FRIENDLY CUSTOMER SERVICE: We have a commitment to every buyer 100% satisfaction. if you have any problems, just contact us, we will settle the issue according to your willingness

Product description

Specification:

Needs 5/8 inch or 16mm diameter opening to install.

Fits dispenser wall up to 11/16 inch or 17mm thick.

Material:304 Stainless steel.

Thread Pitch: 1.25MM/0.05 inch.



Package includes:

1 x stainless steel spigot;

2 x stainless steel washer;

2 x silicon gasket;

1 x stainless steel nut;

1 x Anti-Clogging Cap;



Installation Steps:

1.Remove the Anti-Clogging Cap from the spigot;

2.Put a metal washer on the spigot;

3.Put a silicon gasket next to the metal washer;

4.Put the half assembled spigot through the hole of the dispenser;

5.Take another silicon gasket and put on the spigot from the inside of your jug/vessel;

6.Add another metal wash behind the gasket;

7.Put the nut and tighten it slowly;

8.Put the Anti-Clogging Cap on the end and tighten it. (Please avoid over tighten if your dispenser is glass)



Kindly Remind:

1. Make sure the Mounting Hole Size before purchasing.

2. Before installation, wash the stainless steel spigot in soapy water and rinse suggested .

3. Do not over-tighten, it could crack the dispenser made of fragile material like glass or ceramic.

4. If used for sugary drink, we suggest that remove the spigot from the dispenser and clean thoroughly.

• Quick Installation-This Beverage Dispenser Replacement Spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick and for flat surface can fit up to 1 inch hole.
• High Quality-This beverage spigot is made up of food-grade 304 stainless steel and come with stainless steel Anti-Clogging Cap ,no lead included in the material.
• Heavy Duty-This stainless steel spigot is solid and heavy duty. It is designed to replace those cheap, easy break and leak plastic spigots of drink dispenser, beverage dispenser jar or sun tea jar/jug/urn.
• Multi-Function-This beverage spigot is great for tea, cocktails, wine, water, juices, and other beverage.
• Lifetime Warranty-This Beverage Dispenser Replacement Spigot is backed with a lifetime warranty.So if you have any problems about our Replacement Spigot, just contact us.

User questions & answers

Question:	How long is the pipe that goes through the decanter
Answer:	The thread part is about 1 inch. And about 1.57 inch with the Anti-Clogging Cap.
Question:	Is it universal
Answer:	No, this spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick. Please contact us through Amazon Messenger if you are having any problems with our Spigot.
Question:	When I try to add more than one spigot, I get a notification saying that you only allow one per customer, why
Answer:	I was able to order and recieved two of these spigots probably not quite a year ago, however since that time the world has entered an era of diminishing supplies and hoarding of the most unusual items. If you must have two try ordering one now and after you receive it then order the second one.
Question:	What is the thread diameter and pitch
Answer:	The thread diameter is 16mm.

Product description

Size: 85 mm * 62 mm * 16 mm; Weight: 170 g; Valve seat diameter: 16 mm; This product fit for any drink jug.

• Universal Fit: Leaf Beverage Dispenser Replacement Spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick.
• You do not need installation work, even people who are weak can be easily installed. Since Beverage Dispenser can be disassembled, please wash with dish detergent.
• Food Safe & Long Lasting: Constructed of lead-free food grade and rustproof 304 stainless steel for a safe and long-lasting use; premium silicone gaskets fit snugly to prevent leaks and spills.
• This beverage dispenser with the international joint 4-minute seam, screws are precise, sealability is good, liquid does not leak.
• Large quantity and cheap, can be wholesale，Ceramic spool, one year warranty

Product description

Estilo stainless steel drink Dispenser replacement spigot is and ideal replacement of those cheap, easy to break, junk, plastic spigots that come with your favorite beverage dispenser. Made of high quality food grade lead free stainless steel, non- corrosive and extremely durable. Ideal for dispensing your favorite drinks, cocktails, juices, water, wine, tea etc. For easy assembly Use a ¾ inch wrench to tighten the nut, to not over tighten, for optimum care rinse after using when nut is loosened and handle partially opened.

• Made of high quality lead free food grade stainless steel, non- corrosive and extremely durable.
• Fits 5/8 of an inch or 16mm openings and fits beverage dispenser up to 11/16 inch or 17 mm thick.
• Great replacement of those cheap easy to break plastic spigots that come with your favorite beverage dispenser
• Ideal for dispensing your favorite drinks, cocktails, juices, water, wine, tea etc.
• For easy assembly use a ¾ inch wrench to tighten the nut, to not over tighten, for optimum care rinse after using when nut is loosened and handle partially opened.

User questions & answers

Question:	I’m using mine for laundry soap. Will this accommodate thicker liquids? The one that came with the jar is very slow
Answer:	I would like to know as well. Have any of you tried it yet? The one that came with my container is extremely slow.
Question:	What is the country of origin
Answer:	China
Question:	How big does a hole have to be in the container
Answer:	Per the description: The spigot fits 5/8 of an inch or 16mm openings and fits beverage dispenser up to 11/16 inch or 17 mm thick.
Question:	Will these work on the plastic sided drink dispensers or glass only
Answer:	It will work on plastic as well. This is a replacement item. The silicon seals should seal up really nicely. Also, a really good quality piece.

Product description

DOZYANT Superior Quality Stainless Steel Beverage Dispenser Replacement Spigot is designed to replace the cheap, easy to break and leaky plastic spigot of drink dispenser, beverage dispenser jar or sun tea jar. Our spigots look elegant, feel solid, perfect for Beverage Dispenser Carafe



A must have! You can't beat the quality of a solid stainless steel beverage dispenser

- Easy to Install and Use - Highest Quality Food Grade 304 Stainless Steel Spigot - Not Rust,NO Pb & NO Lead.



Basic Specification

Material: Food Grade 304 Stainless steel

Thread Pitch: 1.25MM

Size: as picture shows

Color: Silver

Durable stainless steel spigot makes serving easy and heavy duty construction is perfect for any food service application. This is the Best Solid Stainless Steel Beverage Replacement Spigot for Water, Cold Beverages, Beer,Juices, and Kombucha Tea.



FITS:

※ALL Stainless Steel BERKEY SYSTEMS:

·Travel Berkey

·Big Berkey

·Royal Berkey

·Imperial Berkey

·Crown Berkey

※All Stainless Steel SYSTEMS

※All other beverage dispensers with a 5/8 -3/4" (16-19mm) Spigot opening.



Click the "ADD TO CART" button at the Top of this Page, Save big and enjoy it now!

• Quick Installation: This Beverage Dispenser Replacement Spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick.
• Multi-Function – The DozyAnt Beverage Dispenser Replacement Faucet is great for Dispensing Tea, wine, water, juices and other beverage. Fits all Berkey Stainless Steel models. Will not fit Berkey Light.
• Premium Quality –The DozyAnt Beverage Dispenser Replacement Spigot is made of fine solid stainless steel, no lead included in the material, surprisingly durable and corrosive-resistant, good for health and with a long life with proper appliance.
• Notice - Wash and tear off the white protective films on the washers before use. If necessary, use 3/4 inch wrench for the nut, do not over-tighten. Rinse thoroughly by clean water with handle in partial open position (45 degree turn) after the usage. If used for sugary drink, we suggest removing the spigot from the dispenser and clean thoroughly.
• Warranty & Friendly Customer Service: We have a commitment to every buyer 100% satisfaction. After all, we are customers, too. So if you have any problems about our DozyAnt Beverage Dispenser Replace Spigot, just contact us, we will settle the issue according to your willingness.

User questions & answers

Question:	Has anyone used this to replace a Brita Untra Max spigot, and doea it fit
Answer:	it's a great looking spout mine leaked in a month. Did not get a refund either. piece of junk. went back to a cheaper plastic one like the previous plastic one that lasted 5 years of all day every day use
Question:	Is handle plastic or also stainless steel
Answer:	stainless steel
Question:	Is this spigot better than the plastic one that comes with the filter
Answer:	If one prefers pressing a spring loader lever rather than twisting a plastic handle, then yes, it is better. After months (maybe years) of use, our plastic spigot became leaky.
Question:	Is this press or turn operable
Answer:	Can either press the lever down (holding it down) or can flip it up (in the fully upright position it will actually stay up by itself).