3 best blackout windows

• NON ADHESIVE - Static cling window film without glue, made of environmental friendly materials, very easy to install. Soapy water is the key ingredient, and PEELING OFF THE BACKING LINER is necessary.
• ROOM DARKENING - Our blackout window film stops at least 99% of daylight and also provides comprehensive two-way privacy, ideal for someone who needs day sleep and complete privacy.
• HEAT CONTROL - Besides blocking UV, our black window film are very effective at controlling excess heat and glare, also does well in protecting the home furnishing from fading .
• REUSABLE WINDOW FILM - Glue free design, very easy to take off and reuse, no residue left. Roll up and keep it well when you don't need it until next time application.
• APPLICABLE SCOPE - ONLY apply this film on on single panes of glass, or on modern double glazed units made of toughened glass. The glass must be smooth and flat. You can DIY this film as a glass decor by cutting it into any shape.

Product features

KEY FEATURES:

The blackout window film will completely block out the visible light spectrum. The view from inside to outside is blocked while the exterior side comes with a glossy total black finish. If you want to stop anyone from being able to see within your home and make your home completely dark, choose our blackout film, by all means.

• Glue Free : Easy to install without any adhesive, statically attached to the glass with water.
• Reusable : Easy to take off and reuse, no residue left.
• Total Blackout: Make your room completely in dark.
• UV Rejection: Protect your family from the harmful UV rays, slow down the fading of furnitures.
• Heat Control: Keep cool in summer, maintain heat in winter.

HOW TO INSTALL THE VELIMAX WINDOW FILM?

3 TIPS BEFORE YOU START:

• A small utility knife with breakaway blades is the best tool for trimming film. Film can dull a blade edge quickly; and a dull blade can tear film.
• Fill a spray bottle with a soapy water solution: to 1qt. bottled water, add 1/4 tsp of liquid soap. Avoid using concentrated or degreasing detergents. If you can't find proper liquid soap, the clean water is also OK for the solution.
• Remove any caulk, paint or glue debris that may be stuck to the window.

8 STEPS OF THE INSTALLATION:

1. Measure and record the dimensions the target glass.
2. Clean the glass thoroughly.
3. Add 1+ inch on every side when cutting the film so you have excess film to trim away.
4. Peel off the backing liner.
5. Generously spray the soapy water both on the glass and the window film.
6. Place the film on the wet glass, adjust the position of the window film.
7. Using a plastic squeegee or card, begin squeegeeing the water and air out from under the film.
8. Trim excess material away with a VERY sharp razor or craft knife, leaving a 1/16” wide gap around the edges of the film.

QUESTIONS & ANSWERS

• 1. How to deal with the air bubbles?

Use a hard plastic squeegee or any plastic card to squeegee air bubbles and water. If you find it's hard to get rid of the bubbles, uncover the window film, spray more water between the glass and the film and squeegee firmly again. Water will make it much easier to remove bubbles.

• 2. Why the film fall off after a while?

Please confirm if you have removed the liner, trimmed the edges or squeegeed excess water and bubbles.

• 3. Can I remove the film at a later stage?

Absolutely. Our blackout film is removable and reusable. You can just simply peel the film off the glass in seconds with no mess.

• 4. Can I see outside after applying this film?

No. This film provides 2-way privacy which means you can't see through whether it is viewed from indoors or outdoors.

Children's Bedroom

Shopping Mall

Storehouse

Aquarium

Product description

When a good night’s sleep is all you need, sometimes the most beautiful color is a perfectly dark room. That is exactly what you get when you remove 99% of light with Redi Shade’s Original Blackout Shade. Trim this pleated shade at home for a perfect fit, then install without any tools – no drill, screws or brackets needed. Ideal for any space that requires complete light control and privacy like bedrooms, children’s rooms, and movie rooms. This blackout shade is made of durable paper in the USA.Contact Redi Shade if you need help or have questions 1-888-608-6611 or [email protected].

• Trim at home for the perfect fit inside or outside your window frame, then install in seconds without a drill, screws, or brackets- no tools needed
• Block 99% of light for complete privacy, light control, and UV protection for bedrooms, children's rooms, and movie rooms
• No cords for a clean look and child safety - use included clips to raise and lower shade. Light blocking original fabric shades are made of soft, 100 percent non-woven polyester with a heat reflective layer that helps block heat entering through windows
• Made in the USA of durable paper that will not yellow or crack from sun exposure
• Works as a stand-alone solution, or easily layer behind existing window treatments

User questions & answers

Question:	Can I use these in my apartment where there are already existing permanent blinds (not blackout ones) which I cannot remove
Answer:	The blinds are about 1 1/2 inches in depth. If you have room between the permanent blinds and the window they should fit. The top sticks to the window and unfolds downward as far as you want. They provide a clip to set the height.
Question:	Is it sturdy enough to be taken on and off daily, without ruining the adhesive
Answer:	A simple solution to mounting them daily is to use push pins or thumbtacks. If you cannot push them into wood to hold the blinds at the top of each side then use a tiny hammer or the rubber handles of a pair of pliers. When you leave if you're worried about the holes created by use of pins or tacks just spackle them with wood dough. You might use the same holes to push the pins into.
Question:	what kind of tape to use
Answer:	does the included adhesive tape at the top damage the wall/ceiling when the blind is removed. I only need them for one week.
Question:	How well do these block out the light? I need something that completely blocks the light out. Anyone got a picture of how well these work
Answer:	You can use scotch tape (or any other good tape) and use black trash bags which you likely already have to black out the window for significantly cheaper than these. I used a 30 gal 1.2 mil trash bag on my window which covered the whole thing, and it blocks out about 95% of the light. The drapes then block out the rest creating total black out. If you were to buy the heavy duty "yard trash bags" that are 2 mil or thicker, I guarantee those would blackout a window alone. A 50 gal yard or construction trash bag would cover a huge window. With my drapes (which I never open) you can see the trash bag either so it doesn't look bad. The window its on faces my backyard so nobody will ever see it outside. This window unfortunately faces east so the rising sun beams in my window and I work nights and come home to go to sleep in the morning. This works like a charm!

Product features

Redi Shade Blackout Paper Window Shade

When a good night’s sleep is all you need, sometimes the most beautiful color is a perfectly dark room. That is exactly what you get when you remove 99 Percent of light with Redi Shade’s Original Blackout Window Shade.

Trim this pleated shade at home for a perfect fit, then permanently install without any tools-no drill, screws or brackets needed. Ideal for any space that requires complete light control and privacy.

This Blackout Shade is made of durable paper in the USA.

Redi Shade Original Blackout Paper Shade is the Perfect Solution for:

- Bedrooms.

- Nurseries and Children’s Rooms.

- Daytime Sleepers.

- Media Rooms.

- Metropolitan Areas.

- Vacations/ Hotel Rooms.

Original Blackout Paper Shade

By Redi Shade.

Step 1

Trim for a perfect fit.

Step 2:

Peel to remove liner.

Step 3:

Stick to permanently install shade.

Product description

An Amazon Brand

• 100% Polyester
• Imported
• Blocks out sunlight and harmful UV rays, reduces outside noise, and ensures total privacy; creates energy-saving insulating barrier against heat and cold, keeping room cooler in the summer and warmer in the winter
• Velcro edges allow for customizing the dimensions of the curtain to fit to various window sizes while on the go
• Suction cups affix to the window for easy installation; cannot be mounted to a curtain rod; be sure window is clean and suction cups are dry before installation
• Made of 100% polyester material; machine wash cold and line dry; do not bleach, iron, or dry clean
• Each curtain measures 78 by 50 inches

User questions & answers

Question:	Can it be used in the car
Answer:	Yes
Question:	Is the curtain machine washable
Answer:	32"
Question:	Does this smell at all (especially during hot days
Answer:	Not really. I am 5'6", a Large and the arm length of the top from armpit to wrist is 19, the inseam of the bottoms is about 29". I use them as winter pj's because I can't find any that will stay down while I sleep. The legs always seem to end up by or above my knees.
Question:	We are going to Disney world and was going to purchase for the hotel room. Can anyone suggest if I should buy one or two of these to take
Answer:	60% cotton, 40% polyester. I had to look at the label because they feel like cotton, i.e. they are soft and breathe well.

Product features

Blocks Outside Light

The thick, sturdy shade blocks out all the light coming through a window, quickly turning a day-lit room into a cozy pitch-dark sleeping space.

Great for Travel & More

A great, portable choice for frequent travelers, night-shift workers, or anyone sensitive to light who needs extra help maintaining regular sleep.

Easy to Install

Easily attach the blackout curtain shade to a window using the included suction cups. Use the Velcro edges to adjust sizing as needed.

100% Polyester

Made of 100% polyester, this blackout shade blocks out sunlight and UV rays, reduces outside noise, and ensures privacy. Multiple colors