12 best pellet stove inserts
Pellet stove inserts are heating appliances designed to retrofit into existing fireplaces, converting them into efficient and eco-friendly heating sources. They utilize pellets made from compressed sawdust or other organic materials as fuel. Here's what you need to know about pellet stove inserts:
Fuel Source - Pellets: Pellet stove inserts burn pellets made from compacted sawdust, wood shavings, or other organic materials. These pellets are efficient, environmentally friendly, and create less ash compared to traditional wood-burning stoves.
Efficiency and Heat Output: Pellet stove inserts are highly efficient, with an average efficiency rate of 70-90%. They can produce a significant amount of heat, making them effective at warming a room or even an entire home depending on the size and layout.
Insert Design: Pellet stove inserts are designed to fit into existing fireplaces, seamlessly blending with the aesthetics of the home. The inserts are installed into the fireplace opening, ensuring a clean and visually appealing appearance.
Automated Operation: Many pellet stove inserts come with automated features, including thermostats and programmable timers.This automation allows for precise control of heat output and makes them convenient to use.
Easy to Operate: Pellet stove inserts are generally easy to operate. Users can load pellets into the hopper, set the desired temperature, and let the insert manage the combustion and heat output accordingly.
Environmentally Friendly: Pellets are considered a renewable energy source as they are made from recycled wood waste. When burned, they produce fewer emissions compared to traditional wood-burning stoves, contributing to a cleaner environment.
Clean Burning and Low Emissions: Pellet stove inserts are known for clean combustion, resulting in low emissions and minimal particulate matter released into the air. This makes them compliant with environmental regulations and ideal for those seeking an eco-friendly heating solution.
Ventilation and Exhaust: Pellet stove inserts require proper ventilation and exhaust systems to ensure the safe removal of combustion gases. Venting options include direct venting or venting through an existing chimney.
Pellet Storage: Pellets for the stove are typically stored in a hopper within the insert. Hopper capacity can vary, with larger hoppers holding more pellets and requiring less frequent refilling.
Maintenance: Regular maintenance of a pellet stove insert is essential to ensure its optimal performance. This includes cleaning the burn pot, removing ash, and checking for proper ventilation.
Pellet stove inserts offer an efficient and convenient way to heat a home, particularly for those with existing fireplaces seeking an eco-friendly heating alternative. Proper installation, maintenance, and compliance with safety regulations are crucial for safe and efficient operation.
Below you can find our editor's choice of the best pellet stove inserts on the market
Ashley Hearth AW1820E 1,800 Sq. Ft. Wood Stove Insert, Black
Ashley Hearth
Product description
The AW1820E from Ashley Hearth Products is an airtight fireplace insert that will greatly improve the efficiency of your fireplace. The AW1820E fireplace insert meets the stringent requirements of the EPA "Step 2" 2020 Certification Guidelines. With a heavy cast iron door and a cool touch wood handle along with an air washed ceramic glass that allows a magnificent view of the burning fire, it will be a beautiful addition to your existing hearth. It includes a hearth surround to fully enclose the existing fireplace and is equipped with a spring-loaded automatic adjustment making installation a breeze. The Ashley AW1820E model replaces the previous Vogelzang model TR004 Colonial fireplace insert and the US Stove Company model 2200IE insert.
- 69,000 BTUs heats up to 1,800 Sq. Ft
- Cast iron feed door with large 16.5" x 9" ceramic glass window and heavy gauge 3/16" reinforced plate steel with firebrick lining
- Accepts logs up to 18 inches in length
- Over 75% efficient heating
- Replaces Vogelzang model TR004 and the US Stove Company 2200IE fireplace insert
User questions & answers
| Question: | Can this be used with a zero clearance prefab fireplace |
| Answer: | For the most part, yes. But it really depends on the size of the firebox and flu |
| Question: | How about publishing the installation instructions so we can figure out if we have the skills to perform the installation |
| Answer: | Installation is not too hard. My husband who is a handyman type was able to install ours. |
| Question: | On the dimensions what is considered a height |
| Answer: | Not including the surround pieces, the base of the burner box to the top of the box. |
| Question: | Does this have a blower |
| Answer: | Yes |
Comfortbilt HP22i Pellet Stove Insert Carbon Black
Comfortbilt
Product description
42,000 btu- Auto Ignition-Programmable Thermostat-Powerful blower,Bay Design large view window- Carbon Black, EPA certified, 47 lbs hopper capacity. 110 Volt, heats up to 2,000 sq ft, 1 year warranty, parts available. No Shipping to Alaska, Hawaii or Puerto Rico.
- 42,000 btu- Heats 1700-2000 sq ft
- 47 lbs hopper Capacity/Ash Pan
- High efficiency/110 Volt/Programmable Heat Settings/Auto Ignition
- Large View Area-Bay Design-Easy Install
- 1 Year Warranty - Parts Available
User questions & answers
| Question: | what are the dimenson of part that goes in chimney |
| Answer: | Just love that name that you have for the Amazon user. It is actually 26 by 26 - with 14 inches deep . If you want to you can call us at 919-388-7614 between 9 and 6 eastern time if you have any questions regarding the stove. |
| Question: | The unit is 15 inches deep. How much extra room is required for the vent and intake pipe to come out the back then curve to go straight up a chimney |
| Answer: | You will need 5 inches from the back of the box. Total space inside the cavity should be 17 inches. Or more |
| Question: | Does this stove have removable ash bins or do you have to clean it with a vacuum |
| Answer: | This unit does not have an ash pan because it is a zero clearance meant to sit flat on the floor. The stove comes with a free vacuum cleaner. |
| Question: | Will this work with a pre fab fireplace |
| Answer: | Yes as long as the box is for wood-burning. Not for gas. And must measure a minimum of 30 inches in width 25 inches in height and 18 inches in depth. |
Breckwell SP24I, Matte Black
Product description
BRECKWELL BLAZER SP24I or P24I Fireplace INSERT is a Wood Pellet Insert has a MATTE BLACK Door, black cowl, with a medium black flashing (surround) normally shipped of 30"x45" with gold trim . It is 50, 000 BTU/Hr. , heats up to 2200 Sq. Ft, and has a 60 lb. Hopper Bin. It has Auto-Ignition, 5 Heat Range operating speeds, Electronic LED Key-pad Control Console, and is thermostat ready. It can be run either with or without a thermostat. DIMENSIONS: Rear of Unit: 22. 75" Wide, Depth into hole 16. 5", 21. 0" High. Depth sticking out front 10. 0". The total DEPTH is 26. 5" = 10. 0" + 16. 5". Minimum FIREPLACE HOLE SIZE is 24" Wide x 22" High x 18". Front of Unit: 10" sticking out front, 38. 5" Wide, 21. 0" High. Flashing or Surround: We ship Medium Size 30"x45" unless Large Size 32"x49" requested at $150 more. Weight 210 lbs. on floor and 435 lbs. in a carton strapped to a skid. OPTIONS: GOLD Door Kit $149, Brushed NICKEL Door Kit $149, Medium Flashing Gold or Brushed NICKEL $210, Large Flashing (32"X49") Gold or Brushed NICKEL $360. Standard Ceramic LOG Kit $169, Wall Brick Panel $149. SHIPPING: Shipping is to the Main Terminal of either a nearby Freight Company or local Loading Dock/Forklift Business in the same or nearby city. Residential Forklift delivery is extra. Legal jurisdiction is the home base Cedar Rapids, IA. BUY from us as we are the leading BRECKWELL Dealer in the USA and can answer all your questions and provide ongoing service after the sale.
- 50, 000 BTU/Her
- Heats up to 2200 Sq. Ft
- 60 lb. Hopper Bin with Stepped Top Back for large refills
- Auto-Ignition
- OPTIONS: Medium Fireplace Flashing or Surround 30"x45" (included and normally shipped unless otherwise specified), Option Large Flashing 32"x49" is $150 more, GOLD or NICKEL Door, LOG Kit, BRICK Wall Panel Kit
User questions & answers
| Question: | what kind of chimney liner would i need to use to install |
| Answer: | You can buy from us a Chimney Flue Exhaust Kit for $665 that has a 25 foot 4-inch Stainless Steel FLEX Pipe with inter-connecting pipes, top plate, storm collar, clamp, and vertical vent cap, bottom plate ceramic wool. -- Richard, Stove Warehouse America. |
| Question: | Where is the hopper located |
| Answer: | The Top lid is hinged on the front and the top lid pulls up and then back. The front-top is the lid to the hopper chute angling back at about 45 degrees. -- Richard, Stove Warehouse America. |
| Question: | What is the rate at what amount of pellets it consumes at low and high |
| Answer: | The stove has five different heat settings - 1 through 5. The feed rate is approximately 1 to 5 pounds of pellets per hour depending upon the heat setting. Hope this helps! |
| Question: | Need pellet stove insert installed - live in crisfield, maryland... any help |
| Answer: | You can find local installers for your Breckwell 24i Insert by contacting: (1) a Small General Contractor who is licensed and insured, 2) a HVAC Mechanical Contractor that installs furnaces, (3) a Fireplace Shop that installs wood log stoves. You can google these people or look in the yellow pages to find leads. You could (4) also do it yourself if you have handyman skills and follow the instructions in the Operators Manual Check your local city, county, state authorities on whether or not a building permit is required. -- Richard, Stove Warehouse America |
4-Blade Heat Powered Stove Fan for Wood / Log Burner/Fireplace increases 80% more warm air than 2 blade fan
VODA
- Heat powered - no batteries or electricity required.
- Efficiently circulates warm air throughout the room.
- Less consumption, more efficiency.
- Innovative and durable design.
- Silent operation
User questions & answers
| Question: | Can this fan be installed in ductwork above a wood stove |
| Answer: | No. it sits on your stove and the heat from the stove top generates the heat into the fan and then the blades turn. |
| Question: | can I purchase replacement motors |
| Answer: | Runs with a Peltier Generator (it looks like a little white chip) which, in 2017 sell for around $20. The electric motor is just a regular low voltage D.C. motor sold at any craft shop for about $2.50. |
| Question: | What CFM does the fan produce at top speed |
| Answer: | Should this fan be moving air??? Holding a feather or thread in front of it, and it isn't moving at all... ???? |
| Question: | Would the fan hurt your finger once the fan gets up to speed |
| Answer: | I have this fan. I can stop it no problem with one finger; it is extremely weak and once you touch it, it stops. There is no feeling of a powerful motor driving it. |
Product features
Why do we need to use the stove fan?
Instead of the heat rising vertically with a standard stove, the stove fan uses its blades to divert the warm air horizontally. The extra movement of air will help warm the whole room, not just the ceiling and the area near the stove.
How is working without batteries or electricity？
Whisper-Quiet and Easy to Install
Attention
Never handle the base of the stove fan, do not set the stove fan down on an unprotected surface when hot. To move or carry the fan, always use the extendable handle while wearing gloves.
Rockford Chimney Supply RockFlex Stainless Steel Flexible Chimney Liner Insert Kit, 3 Inch x 20 Feet
Product description
Your new stainless chimney liner kit will include: Premium .006 Thick Stainless Steel Flexible Chimney Liner (316). The liner is air and water tight sealed. 7 seams with 10 corrugations between each seam. These liners have the very best flexibility and strength combined on today's market. When they heat up they expand, when they cool down they contract, cutting down and fighting against creosote build up. Note: The size given is the inside diameter. Add 1/4" for the outside diameter of the liner. This kit includes a Vertical Appliance Connector where the liner fits into the female side, utilizing the quick connect band. Use the Appliance Connector when you are connecting vertically to the top of a fireplace insert or appliance. A perfect round fit every time thanks to the smooth weld technology. A 13" x 13" Top Plate with a Quick Connect Collar is also included to secure the chimney liner from the top of the chimney. You can trim it to fit with a pair of snips and it's ready for installation. If you need a larger size or different style, please contact us for details. The Quick Connect Flue Cap with mesh screen will keep animals and debris out of the chimney. Fasten down the quick connect clamp to the collar of the Top Plate and you're done! A sharp looking square chimney cap that installs in a snap. Complete do-it-yourself installation instructions (Installing a chimney liner made easy.) If you're at all handy, do this job yourself and save between $1,200 and $2,500. We will support you before and after the sale. Lifetime Warranty and it is transferable if you should ever sell your house. Note: Please measure the inside of your flue and inspect the flue for offsets or narrowing sections to be sure the flue can accommodate the chimney liner you are purchasing before ordering. Highly recommended to contact one of our Certified Technicians to go over your installation before purchasing. Rockford Chimney Supply would be glad to help you plan your installation today!
- Complete Do It Yourself installation instructions; We will support you before and after the sale
- RockFlex Chimney Liner Warranty; The only warranty that is transferable to the next homeowner
- UL1777 Listed in the USA and ULCS635 in Canada; Flexible liners are only to be installed inside a masonry chimney
- Quick Connect System; Simply tighten the clamps and enjoy your UL listed RockFlex liner
- RockFlex Chimney Liner; Constructed of 316 stainless steel, exceeds all chimney industry standards
User questions & answers
| Question: | Can it be used with comfortbuild hp22i pellet stove insert (vent is in the back of the unit |
| Answer: | Hi, you would want to order the kit with the tee connector to connect to the back of an insert inside a traditional fireplace. http://www.amazon.com/dp/B00REJI5WK?ref=myi_title_dp |
| Question: | Can I use this for my pellet stove insert to exhaust up and out my chimney |
| Answer: | Hello, yes it can be installed inside a brick chimney or masonry chimney to vent a pellet stove. |
| Question: | Can this be trimmed to fit? I need it 13 foot |
| Answer: | Hello, yes it can be trimmed. We suggest using a grinder with cutoff wheel. You can trim the liner flush with the top plate collar once you have it hooked up. - Rockford Chimney Supply |
| Question: | Can I connect the flex pipe directly to my unit without the adapter? It fits perfectly. I would cut the clamp off and use that to tighten it |
| Answer: | Hello, typically you would use the vertical appliance connector to connect to the appliance exhaust outlet. However, it may vary depending on the type of appliance and the manufacturer's installation instructions. Please feel free to reach out via phone or email to go over your particular installation. - Rockford Chimney Supply |
Tomersun 4 Blades Heat Powered Stove Fireplace Fan for Home Wood Log Burning Fireplace Circulating Warm Air Saving Fuel Efficiently
TOMERSUN
Product description
How Does the Stove Fan Work?
The stove fan works by using the heat from your wood stove to drive the stove fan blades making for a simple and elegant solution to your issues with heating. The stove fan makes use of a Thermoelectric Power Generator.
The heat is moved from a hot area to the cold metal fan blades resulting in an electric current. This energy that is produced powers a rotary motor that spin the blades to move air. The stove fan is very reliable and has no need for any other source of energy.
The base of the stove fan heats up, there’s a motor here, which is powered by the heat that’s created from your stove. So the fan sits directly on the top of the stove and as soon as it hits a certain temperature, the motor starts working, the stove fan will spin faster when it’s hotter.
Which type of stove does the stove fan work with?
No matter which stove you have: gas, electric, pellet stove or wood burning stove, catalytic and non-catalytic, stove fans will work well.
About Tomersun 4-blade Heat Powered Stove Fan
Material: Anodized aluminum
Noise<25db
Net weight: 525g
Shipping weight:770g
Base size: 7.1*10cm
Overall Size: 16W*12D*21Hcm
Air Flow: 150~180CFM
Operating temperature:85°C - 350°C(185°F - 660°F)
Welcome to our store! We are striving to provide you with great shopping experience. Please rest assured that our products have been well tested, examined, and packaged before shipping out.
Any question please feel free to contact us first and we will respond and provide great solutions for you immediately.
- Necessary Fireplace Accessories- the stove fan is widely used for gas, electric, pellet stove or wood burning stove, stove fans will work well and disperse hot air efficiently. wood stove fireplace fan
- Eco Friendly-The stove fan is powered by heat from your fireplace or wood burning stove, no batteries or electricity required. The hotter the stove is, the faster the stove fan spins. wood stove fireplace fan
- Silent Operation- The only moving part of the stove fan is the blades assembly, so the working noise is below 25DB, very quiet. You even do not know the stove fan is there, but you will feel the warmth well. wood stove fireplace fan
- Operating Temperature- The general working temperature of the stove fan is 85°C - 350°C(185°F - 660°F). Usually the fan gets spinning at about 55°C, and turns most efficiently when the temperature reaches about 250°C-300°C. wood stove fireplace fan
- Overheating Protection-The In-built Bi-metallic strip at the base of the stove fan is designed to raise the edge of the fan slightly as the maximum operating temperature is approached to protect the motor and the thermoelectric module. wood stove fireplace fan
User questions & answers
| Question: | How many CFM's does this develop |
| Answer: | More like cim, cubic inch per minute. |
| Question: | will this work if I put it on the hearth of my fireplace. note it is not a wood burning stove |
| Answer: | Depending on how much heat come out of the hearth area, it should work. I have mine on a gas fireplace and hung on wire to get it front of heat. I've been using it this way for 2 months and I'm very happy with it. |
| Question: | Will this work in my ash catcher to circulate debris |
| Answer: | Probably not. |
| Question: | Could this be used on top of a dyna-glo kerosene heater |
| Answer: | I use it on my dyna-glo and it works perfectly. I took the top of the cage off which was only 2 screws so i could place the fan directly on top of the heater. It blows on high speed and moves air well. |
Quadra Fire Pellet Stove/Fireplace Loop Igniter Element SRV7000-462
Quadra-Fire
Product description
QuadraFire Pellet Stove Loop Ignitor for Quadrafire Pellet Stove & Inserts. Fits all Quadra-Fire Pellet Products with Steel Burn Pot as well as EcoChoice Pellet Stove models PS35, PS50 and Cab 50. This ignitor has 18 inch wires and connectors. Can be cut to fit older models with shorter wires.
- Quadra-Fire Pellet Stove Ignitor
- Original Quadra-Fire Parts
- Part # SRV7000-462
- Fits all Quadra-Fire Pellet Stoves and inserts with a steel burn pot
- 18" Wire Connectors
User questions & answers
| Question: | Does it come with any installation hardware or instructions |
| Answer: | No installation instructions as installing it is simple-- simply connect the two wires where the others were connected. |
| Question: | how many watts of electricity does it draw |
| Answer: | 300 Watts |
Quadrafire Stove Fan Room Air Blower Fan Pellet, Wood & Gas 812-4900
QuadraFire
Product description
Quadra-Fire & Heatilator Stoves Convection/Distribution Room-Air Blower Fits Quadra-Fire Pellet Stove Models: ~ Classic Bay 1200 Insert (CB1200I) Note: The Quadra-Fire CB1200 FS will use a different blower assembly. Please contact us for assistance. ~ Castile Freestanding ~ Castile Insert ~ Santa Fe Freestanding ~ Santa Fe Insert ~ Contour Fits Quadra-Fire Gas Stove Models: ~ Castile GAS ~ Garnet MBK (Does not fit the Garnet DV250) ~ Garnet T ~ Hudson Bay ~ Hudson Bay Insert ~ Columbia Bay ~ Columbia Bay Insert ~ DV400S ~ DV400SL ~ DV40 Step Top ~ DVI25 ~ DVI30 ~ DVI32 ~ GB40 FS (Grand Bay 40) ~ GB40I ( (Serial # 253376 and lower) ~ Remington ( QFP30 ) ~ Remington ( QFP40 ) ~ Sapphire ~ Topaz Fits Quadra-Fire Wood Stove Models: ~ 1900 FS ~ 2100 FS (Pre 1995) ~ 2100 Millennium ACT ~ 2100 Millennium ACC (21M-ACC) ~ 2700I (Fireplace Insert. Fits models manufactured before Nov. 2009. Does not fit the new 27i-ACC ~ 3100 Millennium ACC ~ 3100 ACC Step Top ~ 3100 FS (Pre ACT) ~ 3100 FS ACT ~ 4100 FS ~ 4300 FS (Pre ACT) ~ 4300 Millennium ACC ~ 4300 Millenium ACT ~ 4300 ACT Step Top ~ 43ST ACC ~ 4700 ACT ~ 57ST ACC ~ 7100 Fireplace (Pre serial #0091588198) ~ Cumberland Gap ~ Cape Cod ~ Isle Royale ~ Yosemite Fits Heatilator Pellet Stove Models: ~ Eco-Choice PS35 Fits Heatilator Wood Stove & Fireplace Models: ~ Eco-Choice WS18 ~ Eco-Choice WS22 ~ Constitution Fireplace (C40) Pre serial #0091535936 Fits Heat & Glo Wood Stove Models: ~ Northstar Fireplace (Pre-serial #0091535936)
- Quadra Fire Distribution/Convection Blower Premium Replacement
- Fits several Quadra-Fire & Heatilator Pellet, Gas and wood stove models. Please verify your model and contact us if you require assistance
- 115V AC, 60Hz, .27 / .84 AMPS, Thermally Protected
- EXCLUSIVE 1 Year Warranty from Date of Purchase
User questions & answers
| Question: | Where do i find model number for my stove |
| Answer: | pull open top lid were you put the pellets. should be a tag on the back |
| Question: | can I get a power cord and fan control that will work with blower? Thank you |
| Answer: | I belive so |
| Question: | Will this replace for Santa Fe convection blower |
| Answer: | Yes, that will fit your stove... |
| Question: | Will this fit a quadrafire Castile insert pellet stove |
| Answer: | My Quadra-Fire Castile Pellet Insert manual indicates an 812-4990 Convection Blower.. This is probably a misprint because the 812-4900 is stated in numerous places as the correct part. I bought this item and then decided to thoroughly clean the original fans. This nearly eliminated all of the annoying bearing noises it was making so have not installed the new one yet, keeping it as a spare. BTW, if your fans don't work at all, make sure Snap Disc #1 is working properly first. |
Lynn Manufacturing Replacement St Croix Pellet Stove Exhaust Gasket 80P52232 & Enviro 50-1448, 2102J
Product description
Lynn 2102J Replacement St Croix Pellet Stove Exhaust Gasket 80P52232 & Enviro 50-1448
- 2102J REPLACES: St. Croix 80P52232
- FITS: St. Croix: Afton Bay, Auburn, Element-MF, Element-P, Greenfield, Hastings, Lancaster, Prescott, York Insert | Enviro: Windsor, Omega, MAX, EF2, MINI, EF4, P3, EF5, Meridian, EF3, BERN / MINI, VF-PELLET, Empress FS | Hudson River: Chatham, Davenport, Kinderhook | Vista Flame: VF100, VF170, VF Windsor
- SIZE: Approximately 4'' x 4'' x 1/8''
- MATERIAL: Superwool Plus paper, which is flexible, strong, seals well & withstands 2100F. Superwool is an alternative to ceramic fiber with improved health and safety attributes. Superwool products do NOT carry a GHS health hazard warning label.
- Made in the USA by Lynn Manufacturing, Inc.
User questions & answers
| Question: | I ordered a combustion fan and distribution fan will it come with gaskets |
| Answer: | We don't sell any fans. You would need to ask whoever you bought the fans from. |
| Question: | I have a st.croix auburn stove and last time i replaced the exhaust fan gasket it was round and seemed alot bigger than this one. Will this one work |
| Answer: | You should refer to the parts list in your manual to double check the part number. It should match the part number in the description. |
Quadra-Fire 4 Pack of Replacement 15 amp Fuse for Mt. Vernon AE Pellet Stoves & Inserts
Product description
Replacement 4 Pack of fuses for QuadraFire Mt. Vernon AE Stoves & Inserts. Also fits QuadraFire Edge 60 Fireplaces. This is a pack of 4 fuses.
- Quadra-Fire Replacement 4 Pack of fuses for Mt. Vernon AE Stoves and Inserts
- Also used on QuadraFire Edge 60 Fireplaces
- 4 replacement 15 amp fuses
- 7000-491
- Original Quadra-Fire Parts. No Generics.
User questions & answers
| Question: | How do you remove the cover from the control box to get to the fuse |
| Answer: | You have to go through the box on the left hand side, disconnect the wiring harnesses and take the cover off the control box. The fuses are inside and you'll probably have to order the fuses as we couldn't find them locally. |
| Question: | Will these work for an Englander pellet stove to replace the fuse for the fan |
| Answer: | Not sure about the fan on the Englander stove but they work for the control panel on my stove (Kozi 100). Good luck with your stove and a very Merry Christmas to you and yours. |
Napoleon NPS45 / NPI45 Pellet Stove/Insert Replacement Electronic Control Board, Circuit Board
Product description
Brand New; direct fit replacement PCB control from original OEM Design. SKU-201-00505 with 30-day money back Guaranteed if not satisfied. Don’t pay excessive retail price for copies of this industry standard.Control Unit manufactured in USA and ships from California with free USPS ground shipping in lower 48 United States. Will also ship to Alaska & Canada but additional shipping fees will apply. Unit is sold and packaged individually in anti-stat bags for safe/secure delivery. When you purchase from us you know you will be getting the best price because you are purchasing directly from the manufacture. With over 29 years of manufacturing & design experience, you can trust our products will be top of the line. We strive hard to provide the best products to our customers at the lowest prices. Hurry while supplies last, with our low introductory price these Pellet Stove Digital Control Boards will sell out fast. Disclaimer - All repairs and or replacements should be done by a certified technician. ***REQUIRES 12-PIN Connector*** Part # NPS-500 Replaces Napoleon Part # W190-0036 Direct OEM Part / NEW
- Napoleon NPS45 Control Board, Circuit Board
User questions & answers
| Question: | What is the warranty on this nps 45 control panel |
| Answer: | We offer a 30 day return policy. |
Harman Accentra Insert & Accentra 52i Replacement Center Cast Medallion (3-00-674060)
Product description
Replacement cast iron medallion for Harman pellet stoves. Medallion is placed in the center, above the flame guide.
• Genuine OEM Harman replacement part #3-00-674060
• Cast iron material
• Mounts just above the flame guide against the rear wall of the firebox
• Refer to owners manual for installation instructions
Fits the following Harman pellet stove models:
• Accentra Insert
• Accentra 52i
- Genuine OEM Harman replacement part #3-00-674060
- Mounts just above the flame guide against the rear wall of the firebox
- Fits Harman pellet stove model Accentra Insert
- Fits Harman pellet stove model Accentra 52i
- Cast iron construction
Latest Reviews
View all
Ultrasound Machine For Home Use
- Updated: 11.05.2023
- Read reviews
General Nevada Travel Guides
- Updated: 11.06.2023
- Read reviews
Power Acoustik Hd Radios
- Updated: 02.05.2023
- Read reviews
Account Fortnite Ps4
- Updated: 23.01.2023
- Read reviews
Razer Backlit Mechanical Keyboards
- Updated: 22.07.2023
- Read reviews