11 best wood burning furnace

• Dimensions are 12" Wide x 8" Deep x 9.5" High
• Basket weighs 12 lbs. and holds 12 lbs. of wood pellets
• 1/4" thick, non-perforated
• Heavy Duty All Welded
• 7 Day Return Policy. Customer responsible for all shipping charges.

User questions & answers

Question:	When you buy wood pellets by the ton are they in bags or are they loose
Answer:	Almost all SN+ 5w20 and 5w30 oils are now blends. Valvoline is simply updating their containers. There was plenty of group III stock in there even when it was called a conventional.
Question:	How do you get it to burn hot
Answer:	No
Question:	How long will a full basket burn
Answer:	YES.
Question:	I have a regular wood stove. Is it safe to burn pellets
Answer:	I don't know about this specific model--mine is a 400C. However, I can tell you what to look for on yours: you should find an access door that opens up below the 'fire box'--this is about 4-5 inches in height. You'll need enough room to place the fan assembly, a source of 110V electricity, and a place to locate the sensor which is magnetized and will 'stick' on the underside of the firebox.

Product description

Features:

1. Start at low temperature: faster, larger air volume. Designed to circulate warm air generated by the wood/coal or pellet burning stove. Normal surface temperature is 50°C~350°C /122℉~662℉.

2. Environmental protection and self-powered: The thermoelectric module acts as a small generator to drive motor of fan. No batteries or electricity required! Improved hot air circulation brings greater comfort, fuel consumption is as low as 17%, fuel saving, enjoy heat from the stove faster.

3. Safety design: The furnace support is treated with anodized aluminum, high temperature resistance as high as 662°F (350°C), not be deformed or discolored even after working at high temperatures for a long time.

4. Silent operation: As the furnace heats up, the wood stove fan runs faster and faster, dissipating heat to the far corners of the room. It is almost silent.

5. Overheating protection: Bottom built-in bimetal strip to slightly raise the edge of fan when it is close to the maximum operating temperature to protect motor and thermoelectric module.

Specification:

Model: SF103S

Operating temperature range: 122 degrees F to 662 degrees F (50 degrees C to 350 degrees C)

Air volume unit: 150-180CFM

Product size(approx.):

Length 110mm/4.33in

Height 145mm/5.71in

Power: thermoelectric module

Material: aluminum alloy

Packing List:

1*Fireplace Fan

Note:

 Do not carry the stove base, do not place the stove on unprotected surface when it is hot.

• Start at low temperature: faster, larger air volume. Designed to circulate warm air generated by the wood/coal or pellet burning stove. Normal surface temperature is 50°C~350°C /122℉~662℉.
• Environmental protection and self-powered: The thermoelectric module acts as a small generator to drive motor of fan. No batteries or electricity required! Improved hot air circulation brings greater comfort, fuel consumption is as low as 17%, fuel saving, enjoy heat from the stove faster.
• Safety design: The furnace support is treated with anodized aluminum, high temperature resistance as high as 662°F (350°C), not be deformed or discolored even after working at high temperatures for a long time.
• Silent operation: As the furnace heats up, the wood stove fan runs faster and faster, dissipating heat to the far corners of the room. It is almost silent.
• Overheating protection: Bottom built-in bimetal strip to slightly raise the edge of fan when it is close to the maximum operating temperature to protect motor and thermoelectric module.

Product description

6", 6RV-RT, Round, Type B, Gas Vent Top. Top round for gravity draft venting of LP or natural gas burning appliances. This is not for wall furnaces or wood burning applications. Inner wall aluminum, outer wall galvanized. 100 million BTU per hour. 500 F maximum. External screen prevents entry of most bird species.

From the Manufacturer

6", 6RV-RT, Round, Type B, Gas Vent Top. Top round for gravity draft venting of LP or natural gas burning appliances. This is not for wall furnaces or wood burning applications. Inner wall aluminum, outer wall galvanized. 100 million BTU per hour. 500 F maximum. External screen prevents entry of most bird species.

• 6", 6RV-RT, Round, Type B, Gas Vent Top
• Top round for gravity draft venting of LP or natural gas burning appliances
• Not for wall furnaces or wood burning applications
• Inner wall aluminum, outer wall galvanized
• External screen prevents entry of most bird species

User questions & answers

Question:	Why can't this be used for a woid burning stove? I want to prevent rain in an old stove that I use for burning paper, card board, etc. A trash burner
Answer:	Hello,I think it can't work,as it's a heat powered stove fan,which only can be put on the top of the stove,work by the temperature difference between the bottom and top of the fan,circulates the heat into the whole room.
Question:	what is the actual I.D. of the inlet pipe
Answer:	Made in China. Just so you understand my review........ this fan does not work the blades moved slowly for a few minutes then stopped turning. I waited to long before trying to return it. Know I have a cool ðŸ~Ž looking fan that does not work!
Question:	Will the work for a propane fireplace
Answer:	The 4 Blades stove fan can handle a maximum temperature of 644 F (340 C) rotate at more than 900 RPM and push 170-190 CFM Airflow
Question:	Can you use it for a rain hood on top of a house for the furnace
Answer:	Fireplace fan can start working already when the fan is heated to 122 F (50 C) and the heat powered fan operates perfectly when he reaches a temperature of 240 F. Please be aware that although stove might be at this temperature range already the fan metal body will need more time to heat up and reach this temperature in order to start operating. You can also give the fan blades a light push in order to start the fan operation.

Product description

Enerco, based in Cleveland Ohio, has been at the forefront of infrared combustion technology since 1957. This market leading technology has allowed Enerco to build expertise in consumer heating products as well as heavy duty commercial and construction heating products. Starting in 1984, Enerco’s Mr. Heater Brand has delivered innovative technology and unmatched quality and service as America’s Most Popular Brand Of Heaters. From its Original Tank Top Series to its patented Buddy Heaters, millions of consumers have enjoyed high quality comfortable heat. Mr. Heaters Contractor Series Forced Air Propane and Kerosene Heaters have become the industry standard for dependability while its unit heaters have expanded the garage to usable workspace in the winter months. 2011 marked the launch of HERO-The World’s First Cordless Forced Air Propane Heaters featuring Quiet Burner Technology. Through innovative products, innovative marketing, and world class customer service, Mr. Heater is leading the way in portable heat!

• Industry standard for dependability
• Innovative technology
• Unmatched quality and service

User questions & answers

Question:	What size stove pipe does it use
Answer:	If It did have oil holes they are located on the motor end plates. A flashlight may help you locate them easier. Be aware that some times the oil holes may be locate on the side or bottom while being mounted in place. You may have to unplug the unit and remove it from the pipe to ease access to service it.
Question:	Is the door sold separately or what
Answer:	There is a thermostatically controlled switch inside of the box. All you have to do is plug it in and build a fire, once the temperature gets high enough it should kick on automatically. If you start noticing a rattling sound after a while, there is an allen screw that holds the blade on the shaft of the motor. You can remove the side panel and tighten it up. I had to do that to mine.
Question:	Add states fuel is “gas” and list propane & kerosene. can it be converted to natural gas ? also does the igniter come with the kit
Answer:	As long as the pipe size is the same on the oil stove and it burns clean, I believe it would be fine to use. Keep in mind there isn't a way to access the inside of the heat reclaimer to clean build-up except through the stove pipe so you might want to use a section of telescoping pipe to make it easier on yourself.
Question:	Does it come with both barrels
Answer:	I have no idea where it is made. All that I know is that mine was UL listed

Product description

The Forever Cap CCFS6 6-Inch Stainless Steel Liner Top Chimney Cap

From the Manufacturer

Forever Guard Liner Top Chimney Cap Professional Model Heavy Duty. Fits all factory build double and triple wall chimney systems. This chimney cap will also fit single wall stove pipe, masonry round clay flue pipe and flexible chimney relining systems. Designed to slip inside the flue pipe and secures with a pressure fit. Fits over the outside of the chimney pipe, which has a maximum outside diameter of 13 in. or less. 100% Stainless Steel Roll formed 24 gauge hood and base. 5 inch high animal proof mesh screening. Superior 3/4 inch oval holes, that prevents creosote build up. Removable hood for easy cleaning. Base has a 3/4 inch inside lip, which prevent water from rolling back into the flue. The Forever Cap. "Nothing Else Even Comes Close".

• Will fit into 6 inch flues and over 13 inch outer pipe dimension
• Made in the USA
• Brand name: The Forever Cap
• Country of Origin: USA

User questions & answers

Question:	Will this cap work on an "air-cooled" chimney
Answer:	All I can say is that I have a triple-wall metal chimney, and it works just fine. It has lasted longer than the previous two I bought.
Question:	Is this chimney cap for wood-burning chimneys/fireplaces
Answer:	The forever cap is easy to install and decorative. I have noticed that since I installed the cap I sometimes have a down-draft when I open the doors (wood burning stove insert) in order to start a fire. I had used the fireplace for eight years prior without this problem. To stop the downdraft I need to take an electric fan and blow the air up into the open flue for a few minutes. It is a hassle but the cap keeps the raccoons from getting into the chimney.
Question:	Made in the usa or country of origin: china? it can’t be both
Answer:	I believe the caps come from China in parts and are assembled and welded here in N.Y. its 304 stainless steel, sometimes shipped from China, other times from NYC.
Question:	Does this unit meet California code (I think 5/8" mesh)? If not can screen be added
Answer:	All caps are made to nfpa standards, As Ca codes may differ, id check with your local zoning department,just to be certain but do believe 5/8 and up is fine. Our weather shield cap also available, has removable lid for cleaning, and 3/4 " removable screen. Stainless steel

Product description

No Need to Sit So Close to the Fire Anymore! If you own a fireplace or wood burning stove and you would like to get MORE HEAT throughout your house but you DO NOT want to spend more money on electricity - all you have to do is get one of these amazing heat powered fireplace stove fans, and you will be warm and toasty for FREE! That is because this fan does not use ANY electricity. Just set it in the right place, and the heat from your fireplace or stove will turn the fans and blow HOT AIR exactly where you want it! If you have a large room or large house to heat, you already know that a FAN is the best thing for getting the heat to be dispersed throughout your living space. It does not even require maintenance – except for occasional dusting! Plus, the fan acts as an indicator that your fire needs to be stoked. When the spinning starts to slow down, you automatically know that it is time to stoke the fire with more wood! No assembly required. Lasts forever. Makes a great winter housewarming gift!

10 YEARS LIMITED MANUFACTURE WARRANTY

• SAVE MONEY ON ELECTRICITY! No electricity required. Works off the HEAT produced by your fireplace or wood-burning stove. The hotter the fire, the faster the blades turn. Therefore, more warm air gets dispersed throughout your house!
• WHISPER-QUIET! 170-190 CFM Above 900 RPM and MAX Temperature of 644 F (340 C) The only moving part is the blade assembly. Say good-bye to the loud noise of electric forced-air fans! You won’t even know this fan is there – but you’ll FEEL the WARMTH!
• MAINTENANCE-FREE! Just dust it off occasionally, and put some light oil on the blade shaft to keep it spinning smoothly and quietly!
• “BUILT-IN” FIRE-STOKING INDICATOR! Because this fan operates on HEAT, you’ll automatically know it’s time to stoke the fire when the fan slows down! The higher the heat, the faster the blades spin. So when they’re slowing down and you’re not feeling the heat as much as before, it simply is telling you to stoke the fire! What could be easier?
• SAFETY PLACEMENT OF FAN - Fan should be placed on the back of the stove (not in front) 6 inches away from the stove pipe
• material type: Metal

User questions & answers

Question:	I have a small Woodburning FP. It faces NW. Can I mount at exhaust vent to push hot air up chimney , to stop blow backs
Answer:	My didn't come with a damper. That's something you'll probably have to add on your own. Although the company that makes the stove also sells dampers as accessories.
Question:	where is it made
Answer:	I don't see why not. But it's very heavy and should be covered when not in use. The cast iron will rust eventually if it gets wet.
Question:	what is the max temp for the fan
Answer:	no fire bricks, have to screw on legs and exhaust outlet. blocked bottom air inlet with aluminum foil, front air inlet is best, drilled some holes in ceramic board baffle at inside top of burn chamber for bettet exhaust flow to outlet.
Question:	what temp do it start turning
Answer:	It is a log wood stove not a pellet stove

Product description

US Stove has been bringing warmth to homes across the nation for 140-year. US Stove has a wide range of Automatic Circulators, Plate Steel Heaters, Cast Iron Heaters, Pellet/Multi-Fuel Heaters and Gas Fireplaces from which to choose. The large selection of stoves and accessories will ensure warmth of your home with safe, quality products.cfm550.Product Motor Size : 2.6 Amps

• US Stove Company has been keeping America warm since 1869
• Non sealed bearings with lube tubes
• Genuine USSC parts for easy do-it-yourself repair on your stove
• Similar part to model 80594P
• Blower motor for models: 1300, 1400, 1500, 1537, 1557M, 22AF, 6100, 6220

User questions & answers

Question:	Does this blower come with the gasket
Answer:	No it does not. It’ was about $20 to get one with shipping! A little pricey!
Question:	What is the motor horse power rareing
Answer:	I believe less than a quarter HP. Ordered it for my husband, so not absolutely sure without going and looking at it.
Question:	If I order this will it have the "Non sealed bearings with lube tubes" as stated in the description
Answer:	Our blower did not have oil tubes as stated on description. Very frustrating!
Question:	I'am just looking for the motor for my Hotblast wood burning furnace Model
Answer:	We bought it for our Hotblast wood burner, but our model number is 1557.

Product description

Built strong to last long, this durable feeder from Moultrie premium Pro Magnum line is backed by a lifetime . Enjoy superb protection against even the most determined pests with all metal parts, including a Varmint guard that prevents birds, squirrels and raccoons from raiding your feeder. Now with new square legs that enhance its stability and a belly band designed for easy assembly, this feeder also features a metal spin plate with raised edges, to protect feed from the wind. A dual-battery compartment can hold an extra 6-volt spare while a built-in battery indicator lets you know when they need changing.

• Included Components: 55-Gallon Feeder, Belly Band, Locking Legs, Pro Magnum Feeder Kit

User questions & answers

Question:	How tall off the ground is it? Thanks
Answer:	Yes!
Question:	Does the lifetime warranty cover the programable digital timer
Answer:	I connect directly to a computer which powers the Focusrite so for my setup no adapter needed.
Question:	Do i need a ladder to refill this thing? Do i not see how to lower it for refills
Answer:	20 feet
Question:	Is the bottom of the barrel at an angle in order to disperse all the corn in the barrel
Answer:	No. It is assumed you will power it via the computer you connect it to.

Product features

Moultrie 55-Gallon Pro Magnum Tripod Feeder

Built like a tank, the Moultrie Pro Magnum series of feeders were created to stand up to harsh conditions and hard use. With a steel hopper and industrial-grade electric motor, a Pro Magnum is a long-term commitment between feeder and owner.

Feeder Capacity

The 55-gallon Pro Magnum has a 400-pound capacity and an all-metal tripod that is more than capable of supporting the load. The included Pro Magnum Feeder Kit has a programmable timer that allows up to six daily feed times, each with an adjustable duration of 1-20 seconds.

Power Capabilities

Battery level indicator and Feed Level Estimator help cut out the guesswork of knowing when to replace batteries or fill the hopper. The Pro Magnum series operate on one 6-volt battery, but a second battery can be added for longer field life. An external power port for optional Moultrie solar power sources can eliminate the need to replace batteries altogether.

Spinner Plate

You could make a good case that the spinner plate is the most critical component in feeder performance. It may look simple, but a lot of thought went into the design of our metal spinner plate. It needed some type of barrier against the wind, but that barrier couldn’t impede the flow of feed. The solution is a galvanized metal design that blocks the wind, yet maintains its slick surface over years of use for cake-free operation.

Overbuilt construction

There’s a lot of reasons for the popularity of Pro Magnum feeders, one of the biggest is their indestructible build quality. Neither varmints nor weather are up to the task. The hopper is metal with a protective finish on the inside to better resist rust. Pro Magnum Feeder Kits have all-metal housings for equally tough performance. Add to that square profile metal legs with locking lugs, and it becomes apparent why the Pro Magnum series of feeders have their reputation for longevity in the field.

No varmints allowed, ever

Pro Magnum feeders feature all-metal hoppers that no varmint, no matter how tenacious, can chew through. There’s also a steel collar that tightens down on the lid just to ensure the smarter ones can’t get in. As if that wasn’t enough, we also included a varmint guard to the feeder kit, then added a tall metal tripod to mount it all on.

Programmable digital timer

Control how much feed you want to cast and when you want to cast it. Programmable digital timer allows up to six daily feed times. The duration of each feed time can also be set from 1 to 20 seconds.

External power port

Anything that can reduce battery replacement trips is a significant benefit for a feeder. The Pro Magnum Feeder kit includes an external power port that accepts the 6-Volt Deluxe Solar Panel or Feeder Power Panel. You can use either to recharge the 6-volt battery that’s required to power the feeder. The Feeder Power Panel can also be used as the only power source.

Fewer trips, less downtime

You can better plan your routine trips to the feeder if you have a better idea of when you will need to make those trips. This Moultrie feeder has a battery level indicator and Feed Level Estimator to help prevent downtime and needless travel.

Product description

US Stove Company FBP6E Firebricks are designed to withstand high temperatures and prolong the life of your wood or coal burning stove. Every wood burning stove with firebrick liners will need to have its bricks replaced on a regular basis to keep the stove performing at optimum efficiency. This 6-pack of 4-1/2 in. x 9 in. x 1-1/2 in. pumice bricks is the perfect package to keep your stove operating perfectly. They can be used in any brand of wood or coal stove that uses this standard sized brick. They are designed to fit most USSC wood stove models.

• Replacement bricks for firebrick liners on stoves
• Dimensions: 4-1/2 inches x 9 inches x 1-1/4 inches
• Not for outdoor firebrick usage
• Genuine USSC replacement part
• For any brand of wood or coal stove that uses this standard-sized brick
• 6 bricks per package

User questions & answers

Question:	are these pumice
Answer:	Used these in a standard wood stove, run at the usual temperatures with a hot burn daily to burn the creosote out of the stovepipe, for about a year. They've held up well. They arrived packaged well in bubble wrap, all bricks intact. For the couple odd sizes needed for the floor pattern, they cut easily with a diamond blade on a circular saw. A carbide hacksaw blade would likely work as well for a brick or two. Laid out result was a nice tight fit. Should work nicely for any wood fired stove application in the firebox, size and thickness of course taken into consideration. If it's in the oven cooking space, can't answer, as the materials and what might go airborne and into the food would be at issue. It seems that would be strictly a manufacturer question.
Question:	Would these work well in a wood fired pizza oven as the floor
Answer:	Yes. The bricks can easily handle the inside of a fire place which reaches temp above 800 degrees. Placing them along the inside walls of a grill would prob hold the heat in better.
Question:	Can this be used in a Grill to hold heat? A grill where food is cooked
Answer:	I used them in a propane forge and they melted in under an hour The maximum temperature of a forge is supposed to be 2400 F.
Question:	are these temp rated at upto
Answer:	Hello, Thank you for your question. You can silicone the top plate to the top of the clay tile. It will overhang or you can trim it if you would like to.

Product features

US Stove FBP6E FireBrick

Every wood burning stove with firebrick liners will need to have its bricks replaced on a regular basis to keep the stove performing at optimum efficiency. This 6 pack of 4-1/2 in. x 9 in. x 1-1/4 in. Pumice bricks is the perfect package to keep your stove operating perfectly. They can be used in any brand of wood or coal stove that uses this standard sized brick.

• Can also be used to replace firebrick in most other brands
• Easy installation; increases efficiency
• Fits most United Stoves Company wood stoves
• Genuine USSC replacement part
• 6-pack

Product description

The BSK1000 from US Stove Company is an all-inclusive kit containing everything needed to convert a 36 or 55 Gallon steel drum into a primitive camp stove. Kit contains legs, door, flue collar with damper and all mounting hardware. The Barrel (model DR55) is not included. The BSK1000 is perfect for camp sites along with hunting and fishing situations. This kit is not EPA certified and is not designed for residential use.

• Installation materials are not included (i.e. floor protector, chimney connector, thimble, radiation shield, flue)
• Light weight, portable and easy assembly
• Made of heavy duty cast iron
• Model Number: BSK1000

User questions & answers

Question:	Do you need a blower
Answer:	I haven't tried adding it to bath water, but I don't see why it would be an issue. Its very nice applied directly to the skin as well.
Question:	Does this kit come with a damper for the stove pipe
Answer:	I am a staffer at EO Products. We have not tested the product for this purpose and do not claim that will work to repel insects, however, the lavender essential oil MAY help. It would be worth a try. Or, try this recipe for a DIY bug spray: 2oz Witch Hazel, 2oz Distilled Water, 15 drops Eucalyptus Essential Oil, 10 drops Rosemary Essential Oil, 10 drops Lavender Essential Oil, 1/2 teaspoon Vegetable Glycerin (optional to moisturize skin). Mix Witch Hazel, Vegetable Glycerin and Essential Oils in a bowl and whisk. Add water and whisk until well blended. Pour into a spray bottle. Shake before using. View this recipe and more DIYs on our blog: https://blog.eoproducts.com/diy-insect-repellent-with-essential-oils/ Enjoy!XO, EO
Question:	says for use with 36 or 55 gallon barrel.. will my 30 gal be to small then
Answer:	I put my oil in a spray bottle and spray five squirts across the top of my back before turning off the water. Then I let the shower water hit it lightly so it runs down. I've also put it in a hairdresser's squeeze bottle and run it across the back of my shoulders.
Question:	What is the door opening dimensions
Answer:	It's a normal face moisturizer, I'm not sure how you would use it in the shower without washing it off? I use it after showering.

Product features

US Stove BSK1000 Cast Iron Barrel Stove Kit

The BSK1000 from US Stove Company is an all-inclusive kit containing everything needed to convert a 36 or 55 Gallon steel drum into a primitive camp stove. Kit contains legs, door, flue collar with damper and all mounting hardware. The Barrel is not included. The BSK1000 is perfect for camp sites along with hunting and fishing situations.

• Installation materials are not included (i.e. floor protector, chimney connector, thimble, radiation shield, flue)
• 6 In. flue
• Light weight and portable
• Made of heavy duty cast iron
• Can be used with BKAD500 double barrel adapter kit to double the size of your camp stove
• Easy assembly

Product description

Classic design detail and rugged functionality combine to make this Pilgrim forged 28 inch hearth tool set is the perfect fit for virtually every hearth. In standard wrought iron fashion, this tool set features long, durable tools which have traditional hook handles. The stand features flat hooks for displaying each tool in its own place. Good design is in the details and this tool set has the quality you expect from Pilgrim!



A Pilgrim Original Design.

Lifetime Guarantee.



Pilgrim Home and Hearth a US based leading designer, manufacturer and wholesale distributor of high quality Hearth & Home fireplace and home decor accessories for over 65 years.



Pilgrim is trusted by millions of families to be at the center of the home with beautiful fireplace screens, fireplace tool sets and hundreds of unique home decor solutions. Pilgrim’s success is based on thoughtful design, honest materials, careful craftsmanship and lasting customer satisfaction.



Pilgrim is a strategic OEM partner for some of the most influential and respected retail brands in the country. The fireplace accessories from Pilgrim’s collections are regularly featured on movie sets, design and architectural publications.



Pilgrim manufactures a broad collection of fresh decor essentials designed for every style of home and fireplace all backed by Pilgrim’s legendary Lifetime Quality Guarantee.



Remember, the consequence of poor quality lingers long after the thrill of a bargain is forgotten.

• America’s best-selling fireplace accessories for over 65 years
• Constructed of 3/8 inch square bar stock
• 5 pcs Stand, Poker, Shovel, Tongs, Tampico Fiber Brush
• Hand Foged Iron
• Durable Warm Matte Black Finish
• Pilgrim Original Design
• Lifetime Guarantee

User questions & answers

Question:	How long are the tools
Answer:	Yes mine does ( it’s in the trunk) putting out pure power so expect it to. Get a $30 cooling fan and sit it alil back from the amp to create cooling but if u put the fan right up on the amp it does not create cooling. This amp puts out way more than 1500 Watts . Everyone has a different birth sheet so mine put out 1725 Watts so it’s a solid good price amp don’t think twice and oh it’s 12v rated so if u do not have altinator ur getting pure power with this as opposed to getting 1500 watts at 14v and when bass hits your colts drop so does your wattage
Question:	Is there any assembly required
Answer:	I would say that the answer is yes. It will push your sub woofers to close to the recommended power of around 800 W per sub. My Orion 1500 has a birth sheet of 1647 watts. I am a believer of not over supplying subs with unneeded wattage. It’s really going to come down to the box. But this amp will be able to drive home a lot of power to those subs. I have a ZV5 sundown 12 wired to 1 ohms. It is rated at 2000 W and this amplifier shakes my damn truck to pieces. I definitely wouldn’t go any higher with The 2500 amplifier in the EXTR serious. That would be just way too much.
Question:	is this made in the USA
Answer:	Single mono amp. 1 channel
Question:	is the poker one piece
Answer:	The table with the Futura leg extensions, has a floor to the bottom of the drawer (lowest part of the table) of 33-1/2 inches. That's without using the foot pad adjustments at the bottom of each extensions. Never needed to use them... This complete Futura Drafting table is very stable with or without the leg extensions... I chose to use the leg extensions, as I like to stand every once and awhile to use the table instead of always sitting. I've been using this set up for over 3 years now, with no complaints. I'm a professional artist by trade... and have been very happy with both the Studio Design's, Futura Glass Top Drafting Table and the added extensions...
Question:	What type of mounting hardware come with these speakers ? i need metal u clips for securing speaker after cutting the hole
Answer:	Studio Designs thanks you for the inquiry on our 10073 Futura Leg Extensions. We have never tested adding a second set of extensions, we cannot advise that it will work. Studio Designs thanks you for the opportunity to serve you.
Question:	Cut out diameter
Answer:	I own this table and bought the leg extensions later. They come in a package of four extensions. They basically just insert into the bottom of the legs with a little pressure.
Question:	what size hole do u need to flush mount
Answer:	Yes... the package you are buying, comes with four (4) leg extensions...
Question:	what is the RMS rating? It says above: 200 Watts Rated Peak Power
Answer:	It is made for olympic plates however, the engineering of this machine is basically worthless to use. Design is a failure for proper use. It was a waste of money

Product features

Fireplace Products and Accessories

Pilgrim Home and Hearth has been providing fireplace products and accessories for over 65 years. Our selection of fireplace products makes it easier for you to clean and maintain your fireplace, keep firewood and logs neatly stacked indoors and outdoors, replenish your indoor stash of logs with our carriers, and keep the firewood clean and dry outdoors. For your safety and protection, discover all of Pilgrim's fireplace screens, tool sets, and hearth rugs.

Peace of Mind

While gas fireplaces, stoves and inserts are a great asset to any home, glass fronts can become extremely hot during and even long after operation. Therefore, it`s important to remember, touching the hot glass front can lead to serious, irreversible burns. Pilgrim's hearth accessories will allow you to continue to enjoy the many benefits of your gas fireplace, stove or insert while providing an added level of safety against burns.

Lifetime Satisfaction Pledge

Each of our products is designed with function and aesthetics in mind. All the products that we offer are made from high-quality materials, manufactured with exacting standards to achieve value and beauty in every piece. Quality craftsmanship is what you can expect from Pilgrim!