10 best fireplace remote control

• ★★ ATTENTION: This device is NOT a power supply/Ignitor unit. (No voltage output itself, but passing voltage from your fireplace thermopile for safety reason). Please connect it with power source or circuit in series if using it as a switch. ▼ Durablow battery powered R.F. + LCD screen transmitter and receiver kits give wireless remote control to a gas heating appliance, such as gas fireplace. ▼ Childproof safety lock available. ▼ The temperature range is from 45℉ (7℃) to 99℉ (37℃) .
• ▼ Thermostat feature in transmitter turns ON/OFF when room temperature changes. It also operates the fireplace with the room temperature swings 1 °F, 2 °F, or 3 °F. ▼ Timer feature operates at options of 15 minutes Min. to 9 hours Max..
• ▼ Receiver with LEARN function, snap-on wall plate, and 18-inch wires with connectors to gas MILLIVOLT valve or electric spark ignition module. ▼ Receiver box dimension: 2.6"x2.4"x1.54". (measure your wall outlet box first)
• ▼ Replaces Cross Reference Model #: SKY, 9800322, 9800323, 9800324, 9800326, 9800328, 9800329, 9800550, 9800580, 1001-A, 1001, 1001TH, 1001T, 1410T, 1410-A, 1410TH, 3002, 3301, CON, RCK-K, RCK-KS, 5001, 5010, 5301, 5310, 55644 ▼ LEGAL DISCLAIMER: The Brand name & Model # (if listed) are for cross reference only. All Brands, Trademarks & Model Numbers remain the property of their respective owners.
• ▼ Includes: Remote transmitter, receiver box, wall mount cover plate, screws, slide switch, wires with connectors, manuals / instructions. ▼ ▼ FCC approved. Operates at a range of 20-foot & 360º non-directional RF signals.▼ Transmitter operates 1.5V AAA batteries; Receiver operates 4 (AA) batteries. ▼ Strongly recommend Energizer Lithium Batteries. ATTENTION: Any corrosion caused by batteries leak will be reguarded as improper use by user.

Product features

a) Can NOT turn on fireplace? Check your pilot fire and thermopile first.

All models are NOT power supply. They do NOT output voltage or current to gas valve. They only process the millivolt voltage generating from thermopile if the pilot fire is on.

Therefore, you can NOT turn on the fireplace fire / gas if the pilot fire is OFF or the thermopile is out of operation (no millivolt voltage generated when heated). This is a safety protection from gas leakage. Please check before return.

Shut off the pilot fire, gas supply, wall switch, and any power if your house is unattended for long time.

b) Do they fit my fireplace? How to tell?

To find a remote control that is compatible with your gas fireplace, the first thing you'll need to find is what type of gas valve your fireplace uses. This information can be found most easily in your fireplace installation & operation manual, the relevant information is usually located under the "Wiring Diagram". If you don't have your fireplace owner's manual, you can also find the model # on the rating plate located somewhere inside / behind your fireplace, and search online with words "model # + manual".

You can also identify the valve type by taking a look at it directly in your fireplace. Our remote control models are all compatible with Millivolt valve, which has TH, TH/TP terminals for connection.

c) Smart Home or RF Remote?

1. Looking for controlling and integrating your gas fireplace in your smartphone APP, and voice-control with hubs such as Amazon Echo, Google Assistant speakers, we recommend the Smart Home (SH) WiFi series for you.

2. Looking for a traditional, direct, simple remote control solution by holding a transmitter handset in hand, then the RF type remote control kits are the best fit your needs.

3. Looking for using your smartphone to replace the transmitter handset, and there is no WiFi for internet connection, well, a Bluetooth remote control might be your favorite.

d) Choose No Leak AA, AAA batteries.

For battery-powered devices, we strongly recommend the Energizer AA & AAA Lithium Batteries, of listing ASIN: B00EAKP8S0 or equal quality batteries which are Leak-Proof.

ATTENTION: Any corrosion caused by batteries leak will damage remote control devices. This issue will be regarded as improper use by user.

a) Connect to Millivolt Valve

Adding an optional remote receiver by connecting the TH/TP + TH on Millivolt valve. These terminals are originally designed for a room thermostat.

*Field wired, in series.

b) Replace On/Off Switch or Thermostat

Replacing an existing wall / manual On/Off switch or room thermostat with remote receiver.

c) Connect to Electrical Outlet Box

Adding an optional remote receiver at the 24VAC power (output) of electrical outlet box.

*Field wired, in series.

d) Switches In-Series or In-parallel

Adding remote receiver into an existing wall / manual On/Off switch or room thermostat with remote receiver. Results: Wiring IN SERIES with existing wall switch:

1. Wall switch ON + remote control ON = Fireplace ON;
2. Wall switch ON + remote control OFF = Fireplace OFF;
3. Wall switch OFF + remote control ON = Fireplace OFF;
4. Wall switch OFF + remote control OFF = Fireplace OFF.

Wiring IN PARALLEL with existing wall switch:

1. Wall switch ON + remote control ON = Fireplace ON;
2. Wall switch ON + remote control OFF = Fireplace ON;
3. Wall switch OFF + remote control ON = Fireplace ON;
4. Wall switch OFF + remote control OFF = Fireplace OFF.

1. Under Fireplace

Make sure there is no high heat to damage the receiver box.

Recommended models: Smart Home (SH) series, 100-240VAC RF models.

2. Wall-Mount

There are mounting holes at both sides of receiver box of Smart Home (SH) series remote control kits.

There is also a mounting holes on the thermostat of model SH3002 and SH3002-RH.

Recommended models: Smart Home (SH) series, 100-240VAC RF models.

3. Replacing Wall Switch Panel

Use the included wall switch panel to install the plastic receiver box (batteries type) to replace the traditional ON/OFF wall switch.

Recommended models: Batteries RF models.

Product description

Nobody wants to crawl around the fireplace and get dirty just to enjoy a fire. if its not the cobwebs, soot or bad knee most of us ont even bother using the gaslogs because the startup process just sucks.The On/Off remote model 1001-A manufactured by Skytech and sold under the Peterson brand is your most economical and easy to use remote option on the market. Enjoy your beautiful gaslog set witht the touch of a button. On when you feel like it and off with ease. With a simple 2 wire plug and play setup on any compatible logset you are on your way to enjoying a cozy winter. Order yours today

User questions & answers

Question:	Is this remote and receiver compatiable with a heat n glow sl 750 tr-c fireplace
Answer:	No, you don't need a gasket. It goes metal to metal. t has everything to connect.
Question:	Does the remote work with a model# 1315 receiver
Answer:	Possibly, depends on which valve it has
Question:	How do i connect this when my current unit connects to on/off wall switch and is using the th/tp th conn. already
Answer:	If it looks the same it should work just fine.
Question:	I need to replace an older skytech remote. Do I need to also replace the receiver
Answer:	Thermocouple keeps pilot light on, thermogenerator lights burner, if burner doesn’t light or stay lit , the thermogenerator is bad. You can change one or the other but I recommend changing both at same time, the one that isn’t changed will go bad soon anyway

Product features

Skytech Fireplace Remotes

Fire at the touch of a button! Enjoy the convenience of a fireplace remote control for your gas fireplace. We offer a wide selection of products to make using your fireplace even easier at Skytech Fireplace Remotes. We offer low prices every day.

We're glad you're here, because we wouldn't get to work for this great company without you.

Please call us anytime for great customer service.

Product description

The Skytech 3301 P2 remote control system was developed to provide a safe, reliable, and user-friendly remote control system for gas heating appliances. The 3301 P2 can be operated thermostatically or manually from the transmitter. The system operates on radio frequencies (RF) within a 20' range using non-directional signals. The system operates one of 1,048,567 security codes that are programmed into the transmitter at the factory; the remote receiver's code must be matched to that of the transmitter prior to initial use.

• 5-Button Up/Mode/Down with Prog/Set below the flip cover
• Backlit LCD displays room and thermostat set temp and a 24 hour clock
• Battery powered receiver box with learn function and On/Remote/Off slider switch
• Receiver can be installed in wall, on the hearth or under the fireplace behind the control access panel
• Includes transmitter, receiver, wall holder, wall plate, installation instructions, batteries

User questions & answers

Question:	I need to replace a skytech 1321. I have ventless insert w fan. Will this turn the fp on/off, fan on/off and work as a thermostat
Answer:	i have the skytech no. 1001t/lcd-a. now, will this model this work in its place.
Question:	What is the skytech warranty on this please
Answer:	Yes, mine was just controlled by a wall switch before I installed this. You can turn the gas fireplace on and off or set it to go on and off by room temperature. It works great. If you don't have a wall switch you can mount the Skytech receiver by the gas valve under the fireplace. Wiring instructions were included.
Question:	I have the 3301P , would this one work in it's place
Answer:	I've found when the remote is kept too close to heat it turns red. Or if someone is sitting on it! When it is very cold (like my room this morning with 57 degrees, the screen turns green until the remote warms up.
Question:	Would this make our non-remote gas fireplace log unit into one that could be controled by your remote control
Answer:	I am fairly certain that this remote and receiver will replace your defective one if your current remote is simple on/off control and does not control the flame height or intensity. You would simply disconnect the two wires that run from your old receiver to the gas valve th+ and th- terminals and connect the new receiver to those same terminals. These are usually screw terminals on the gas valve. I don’t believe that polarity is a issue as these wires are connected to a couple of normally open relay contacts.

Product features

Skytech 3301P2 Programmable Fireplace Remote Control With Timer/Thermostat

• The battery powered R.F. transmitter and receiver give wireless remote control to a gas fireplace
• Crystal clear LCD screen, with back-lighting, displays the day of the week, 24-hour clock, and room temperature in degrees Fahrenheit or Celsius; flame icon will appear to indicate appliance is on, a low battery indicator will be displayed when the transmitter's batteries are running low
• 5-Button up/down/mode/set/prog interface provides simple control of a connected fireplace, each button operates differently to customize the appliance's functions to suit the user's need
• Customize unique appliance functions for the remote's two program segments: weekdays/weekends
• Thermostat feature operates the fireplace whenever the room temperature swings (1 °F, 2 °F, or 3 °F) above or below the set temperature
• Partial plastic cover flips to cover buttons so settings aren't accidentally adjusted
• 1,048,567 Security codes allow user to choose the best option to suit their need

• Receiver with learn function, snap-on wall plate, and 18 inch wires with connectors can learn up to additional Skytech remotes and also allows manual control of fireplace with On/Remote/Off settings
• Receiver box is designed for millivolt gas valves only and acts as a dry contact switch (the receiver will not output any voltage)

• The childproof feature allows the user to 'lock-out' operations from the transmitter; built-in Thermistor recognizes whenever the ambient temperature reaches 130 °F and automatically shuts the power off to the appliance, preventing damage from excessive heat

Product description

Replacement for Twin Star ClassicFlame Classic Flame Electric Fireplace Stove Heater Infrared Remote Control 18EF023GRA 18EF023SRA 23EF023GRA 23EF023SRA 25EF023GRA 26EF023GRA 18EF022GRA 18EF022SRA 23EF022GRA 23EF022SRA 26EF022GRA 26EF022SRA

• ★ Replacement Twin Star ClassicFlame Classic Flame Remote Control 18EF023GRA 18EF023SRA 23EF023GRA 23EF023SRA 25EF023GRA 26EF023GRA 18EF022GRA 18EF022SRA 23EF022GRA 23EF022SRA 26EF022GRA 26EF022SRA
• ★ THIS IS NOT A UNIVERSAL Twin Star ClassicFlame Classic Flame Fireplace Remote Control, If you are not sure about which remote to order for your unit, please just contact us before place an order.
• ★ THIS IS NOT A UNIVERSAL Twin Star ClassicFlame Classic Flame Fireplace Remote Control, If you are not sure about which remote to order for your unit, please just contact us before place an order.
• ★ No battery included (Battery Type: AAA 1.5V )
• ★ The remote works without any programming straight out the package once you put in batteries.

Product description

The Skytech systems are developed to provide a safe, reliable, and user-friendly remote control system for gas heating appliances. Partial plastic cover flips to cover buttons so settings aren't accidentally adjusted

User questions & answers

Question:	i have a skytech-3001 what would the ultimate replacement
Answer:	The 3001 is discontinued and replaced with the 3002 model (timer and thermostat). The 3301 model that's listed is a programmable remote and will also be compatible.
Question:	My remore is synced to transmitter but doeant turn on fireplace
Answer:	Check the following: 1. Pilot light on logs is on and burning. 2. all batteries in both the transmitter and controller have output voltage if at least 1.5 volts. 3. if you change any batteries you need to resyc. 4. Transmitter is a POS. my system is about six years old and I have replaced the transmitter several times. If any of the buttons do not function, the only cure is replacement. Check the instructions that came with your logs. Hopefully there is a "manual" position on the gas valve that bypasses all the remote stuff that is not working.
Question:	skytech remote will not work
Answer:	Shelia please call Skytech at 877-205-8601. There are steps associated with setting the unit up. I am unsure what specifically is not working with your unit, the folks at Skytech will walk you through the setup and warranty the unit if required.
Question:	would this be able to be added to propane logs that currently just have a manual on and off switch
Answer:	I would assume that you could because the new unit control box has on- off and auto HOWEVER it would naturally be safer to ask a qualified installer e.g. who would normally come in to clean your unit and take readings to make sure your oms and gas pressures etc are correct. I had my totally serviced and cleaned (including washing of filter for non-vented unit)for $125 after receiving my new unit. Also then adjusted fan speed flame height to my liking. Anytime you're dealing with gas/propane it's best to have a qualified person in. It's worth the piece of mind for $125

Product features

Skytech Fireplace Remotes

Fire at the touch of a button! Enjoy the convenience of a fireplace remote control for your gas fireplace. We offer a wide selection of products to make using your fireplace even easier at Skytech Fireplace Remotes. We offer low prices every day.

We're glad you're here, because we wouldn't get to work for this great company without you.

Please call us anytime for great customer service.

3301

The Skytech 3301 provides remote thermostatic control, as well as a timer function, for use of gas heating fireplaces with a simple click of a button. The remote control transmitter features an LCD display and operates on 1.5V AAA batteries and uses 5 buttons (MODE/UP/DOWN/SET/TIMER&TIME) to communicate wirelessly to a receiver that operates on AA batteries. The receiver connects to all standard millivolt valves, and can be mounted up to 20 feet away from the fireplace. Enjoy the ambience of a cozy fire, control the temperature of the room, and use the timer function all without sacrificing the comfort of your seat using this fireplace remote control from Skytech.

3301P2

The Skytech 3301P2 provides a programmable remote transmitter with thermostatic control, as well as a backlit LCD screen for use of gas heating fireplaces with a simple click of a button. The remote control transmitter features an LCD display and operates on 1.5V AAA batteries and uses 5 buttons (MODE/UP/DOWN/SET/PROG) to communicate wirelessly to a receiver that operates on AA batteries. The receiver can be mounted up to 20' away from the fireplace and connects to all standard millivolt valves. Enjoy the ambience of a cozy fire, customize the appliance's settings with unique programming features, and control the temperature of the room all without sacrificing the comfort of your seat using this fireplace remote control from Skytech.

3301PF

The Skytech 3301-PF provides a programmable remote transmitter with thermostatic control, as well as a timer function and appliance fan, for use of gas heating fireplaces with a simple click of a button. The remote control transmitter features an LCD display and operates on 1.5V AAA batteries and uses 9 buttons (MODE/UP/DOWN/SET/PROG/AHEAD/BACK/TIMER&TIME/FAN) to communicate wirelessly to a 110V AC receiver. The receiver connects to all standard millivolt valves. Enjoy the ambience of a cozy fire, customize the appliance's settings with unique programming features, control the temperature of the room, and use the timer function all without sacrificing the comfort of your seat using this fireplace remote control from Skytech.

Product description

Real Fyre REMOTE, BASIC SYSTEM

• Gas fireplace remote control
• Premium construction for long-lasting durability
• Millivolt wiring easily installs with any standard millivolt valve appliance
• Basic on/off control for simple fireplace operation
• SKU: RR-1A

User questions & answers

Question:	does the remote work with the sky-1001 others numbers on it are 9610 and
Answer:	Yes,true to size and really cute color for autumn.
Question:	Why would a remote control unit ever need to be replaced
Answer:	I suggest medium.
Question:	will this work as a replacement for skyteck
Answer:	No.
Question:	Will this product work as a substitute for the Skytech 1001-A
Answer:	Machine washable. Does not shrink. I hit mine with a light iron to crisp it up out of the dryer. It’s very soft and flowy material. I own 4 of these!

Product description

Compatibility:

• Works with all Ambient Millivolt Remote Transmitters with 4 Dip Switches
• This unit is compatible with MOST 7 and 8 dip switch remotes. We have found there are some 7/8 Dip switch remotes that are incompatible with the new receivers. If this receiver cannot be paired with your remote a new remote transmitter will also need to be purchased. WARNING This receiver comes with a new wiring harness, the older style wire harness will need to be replaced when installing this unit.
• NOT A REPLACEMENT FOR RC-RX or RCMHL-RX RECEIVERS THIS IS NOT COMPATIBLE with RCBHC or RCMHL Remotes. The Skytech MRCK (ASIN B00470V9N6) and MRCK-TH (ASIN B009LNP3YA) are complete remote and receiver packages that will work as a replacement for these items.
• NOT A REPLACEMENT FOR Skytech, Empire, Acumen, or other brand remotes.

Standard Features:

• Remote Receiver and Wire Harness Only
• Replacement for RCM-RX / RMC RX receiver
• Receiver for RCT, RCM, RCMT, RCT, RCST, RCB, TLM, TLT, WWTD, and WMTD transmitters only. 
• Handheld Remote transmitter not included.
• Ambient Technologies replacement receiver for fireplaces and gas logs.

Includes:

• Remote receiver
• Two prong wire
• Black face plate kit
• White face plate kit
• 4 AA Batteries

This unit has 4 dip switches for syncing with the remote transmitter. Instructions are provided on how to set transmitters with 7 and 8 dip switches.

• Replacement for Ambient Brand RCM-RX / RMC RX receivers ONLY
• Only Compatible with Ambient brand remotes. NOT Compatible with Skytech, Acumen, or other brand remotes.
• Replacement for Ambient Brand RCM-RX / RMC RX receiver
• Receiver for RCT, RCM, RCMT, RCT, RCST, RCB, TLM, TLT, WWTD, and WMTD transmitters only.
• See Product Description for Compatibility Questions

User questions & answers

Question:	I need to replace just the two prong cord, which has broken. is the two prong connection cord available for purchase separately
Answer:	This worked fine on mine.
Question:	I can not get the remote to work right now, the red light is flashing very fast, after replacing the batteries, twice, and I tried to reset the tran
Answer:	call ambient Mon-Fri 8-5 CST 877.374.4404
Question:	I'm trying to replace an acumen model: rx05 receiver s/n 215097. is this receiver compatible with the associated 4 dip switch remote
Answer:	It works with ANY millivolt unit. If you unit has a standing pilot, it will work. If your unit will not turn on in a power outage, it won't work.
Question:	Have replaced ambient transmitter twice. both times battery door has popped open and does not maintain the connection. can i purchase battery door onl
Answer:	Yes, it comes with a remote, a receiver, and batteries.

Product description

🔥 Wireless On/Off With Thermostat Remote And Receiver. With the click of a button, you can control your gas logs within 20 feet.



🔥 This wireless remote and receiver can be used with a millivolt safety pilot valve or electronic spark ignition for conveniently turning the unit on / off or use the thermostat.



🔥 This remote control system provides a safe, reliable, and user-friendly remote control for millivolt valve gas appliances. The system can be thermostatically or manually turned on and off with the transmitter. It also includes a child safety lock out, read directions to activate.



🔥 NOTE: Due to the sensitive temperature monitoring components in the transmitter, it is necessary to allow the transmitter to stabilize to room temperature before accurate room temperature are displayed.

• 🔥 Remote allows you to turn your gas logs on/off or set the temperature displayed on your LCD screen
• 🔥 Remote can operate receiver up to 20 feet away that includes a Wall Clip to hang remote and Child Proof Lock-out
• 🔥Attention: This does not work with Latching solenoid gas valve systems PLEASE READ YOUR GAS FIREPLACE MANUAL FOR CORRECT APPLICATION BEFORE YOU PURCHASE. It's a Direct replacement for SKYTECH fireplace ;Ambient fireplace;Majestic Fireplaces; Monessen Fireplaces; Vermont Castings Fireplaces and Stoves Suitable for use with millivolt safety pilot valve or electronic spark ignition gas appliances
• 🔥 Includes remote, receiver, wall plate, and wiring to connect receiver to valve (Batteries and valve are not included)
• ✅ 100% Money Back Guarantee if you are not completely satisfied with IN 30 DAYS of purchase

User questions & answers

Question:	Will this work with empire innsbrook millivote fireplace insert
Answer:	Sorry, our elastic watch band is only suitable for the Apple watch series.
Question:	Will this work with SIT 630 eurosit
Answer:	Our elastic watch band is made of nylon woven fabric, which is very soft to wear on the hand.
Question:	Will this work with gas logs by USAprocom
Answer:	Sizes Available: 38mm/40mm S/M for 5.1"-7.1" wrist (130-180mm), M/L for 5.9"-7.9" wrist (150-200mm) 42mm/44mm S/M for 5.5"-7.5" wrist (140-190mm), M/L for 6.3"-8.3" wrist(160-210mm)
Question:	Can I purchase the transmitter only
Answer:	Not too thin,not too heavy,great for fall,not see through.

Product description

The Skytech 1410 T/LCD fireplace remote control system was developed to provide safe, reliable, and user-friendly remote control system for gas heating appliances. The remote system is powered by 110-120 VAC, yet only a "dry contact" (no power output). The system can be operated manually from the transmitter. The system operates on one of 65,536 security codes that are programmed into the transmitter at the factory. Remote control has an easy to operate timer capability that provides an added layer of safety.

• 4-Button On/Off/Timer/Set transmitter with LCD display
• LCD displays room temp in *F or *C and a 3-hour countdown timer
• 110V AC receiver box with learn function and On/Remote/Off slider switch
• Receiver can be placed on the hearth or under the fireplace behind the control access panel
• Transmitter will show room temperature but this is NOT a Thermostat controlled remote

User questions & answers

Question:	I have one but stopped working. I changed the batteries but still not working. Any ideas what i should try next
Answer:	Tip to tip is 9". I have a smallish wrist and it wraps about halve way around mine.
Question:	I have a wall switch to turn on fireplace manually. can i leave those wires connected and piggy back the receivers wires to TH & TPTH so both work
Answer:	Yes
Question:	How to change The degree from c to f
Answer:	Dear customer, You can order the Aztec green watch band with a black adapter, but we only have Rose gold in the Amazon warehouse. If you need to order, please send me an email and I will tell you how to place the order. Thank you
Question:	How to change c to f
Answer:	Dear customer, the band of this color is a silver adapter, we also have the rose gold, black adapter in the link, you can distinguish from the picture and color.

Product description

The SkyTech mrck (sr-1001) remote control system was developed to provide a safe, reliable, and user-friendly remote control system for gas heating appliances. The system is operated manually from the transmitter. The system operates on radio frequencies (rf) within a 20 ft. Range using non-directional signals. The system operates on one of 255 security codes that are programmed into the transmitter at the factory, the remote receiver must learn the transmitter code prior to initial use.

• On/hi lo/off function control for operating the servo motor valve system
• All battery operated flame adjustment from off to high with 65,536 security codes
• Battery powered receiver box with learn function and on/remote/off slider switch
• Receiver can be installed on the hearth or under the fireplace behind the control access panel
• Includes transmitter, receiver, cover, wall clip, installation instructions, batteries

User questions & answers

Question:	What remote transmitter works for a Un3 receiver
Answer:	I have Apple Watch 5 and also using the 4th hole but the shorter strap, the size small fits me.
Question:	I have an rcaf 1031-4. i need a new box and remote. which model do i order now
Answer:	No, you can’t tighten it. But they are pretty tight to begin with.
Question:	Does this come with transmitter and receiver or just the remote
Answer:	yes it fits
Question:	Are the transmitter and the receiver already paired or will I have to pair them myself
Answer:	No! Very smooth! I love this band!