14 best wood burning furnaces

Product description

Boiler Rust Inhibitor is a highly concentrated liquid buffered Nitrite/ Borate/ Silicate inhibitor designed for closed loop or open loop Woodstoves or Wood Boilers with minimal water loss. It is: Designed to work with all makes and models of outdoor wood furnaces, woodstoves, and commercial and residential boilers. Formulated to provide proper corrosion protection for copper, mild steel, stainless steel, and aluminum. It may be used with either hard or soft water and is compatible with glycol anti-freeze. One gallon will treat 250 to 500 gallons of make-up water. Contains a P Indicator for ease of proper dosage detection (turns your water a light pink). For systems closer to 500 gallons or if your ground water is low in alkalinity the water may not turn pink, although there will be adequate corrosion protection. Safe for yearly storage if stored in cool, dark area. $1,000,000 product quality insurance quality! ISO manufactured! Just add directly to your system. Product meets all D.O.T. shipping regulations.

• Boiler Rust Inhibitor - Treats 500 to 720 fresh water.
• Use in most outdoor wood boilers. Compatible with propylene and ethyelen glycol.
• Stops boiler corrosion.
• Compatible with Iron, SSTL, Copper, Bronze, and PEX.
• Turns the water pink for product residual and leak detection.

User questions & answers

Question:	Would this product work as an anti-corrosion additive for water/methanol injection systems for gasoline/diesel engines
Answer:	You can't. The gate opener has to have a learn button like a garage door opener. Gate openers do not have learn buttons. You cannot pair this remote to a gate opener unless they are using a standard garage door opener as a gate opener.
Question:	Does this work as a corrosion inhibitor for a propylene glycol/water chiller system (chilled water closed loop) at 28 degrees Fahrenheit
Answer:	Yes it does. Mine was the same model. Follow the directions. It took 3 times before my new remote was programmed.
Question:	Would this work as an anti-rust measure when sprayed under a car in heavy salt conditions
Answer:	It should if you have a remote system in service now.
Question:	Can this be used with brass fittings
Answer:	Check the items list of garage doors it supports. I don't like the term universal.

Product description

About us :

Our factory is engaged in kind various of cleaning supplies, we have a professional design team.

How Does the Stove Fan Work? 1. Put the fan on the fireplace and wait for the base temperature to reach 60 degrees, the electro-thermal conversion module starts to start and generates current

2. The power generation module continues to work, generates current and drives the motor, and the motor drives the fan to rotate the blade.

3. The continuous rotation of the fan will keep the heat generated by the fireplace continuous, efficient and energy-saving, so as to quickly let the heat convection in the whole space.

The feature of product:

No electricity is needed, and the heat source of the fireplace is fully used to convert it into power.

The more fire, the faster the fan blades turn, and the heat is quickly transferred to every corner of the room.

Ultra-quiet, say goodbye to the noisy electric fans!

Maintenance-free, just add a little oil to the bearing regularly to play the role of lubrication to ensure the smooth rotation of the fan blades!

Over-temperature protection: When the temperature reaches 350 ° C, the metal shrapnel at the bottom will lift the fan to protect the fan motor from damage!

• 【Blade stove fans operating temperature】The unique blade design makes the fan work more efficiently. No installation, no trouble, no battery or power supply! The general working temperature of the stove fan is 85°C - 350°C(185°F - 660°F). Usually the fan gets spinning at about 58°C, and turns most efficiently when the temperature reaches about 250°C-300°C.
• 【Fireplace Fans Material】The furnace fan bracket is made of high-strength aluminum alloy, which will not deform or change color even if it works for a long time at high temperature. The fan is durable and can be wiped clean with a damp cloth.
• 【Heat powered fan energy saving】Thermoelectric module acts as a small generator to power the fan's motor. No batteries or electricity required! Efficiently drive warm air throughout the room. Reduce the fuel consumption and more efficiency.
• 【Wood stove fireplace fan】Newly Designed Blade, Larger Air Volume, Lower noise. You don't even know the stove fan is there, but you feel the warmth! You will enjoy the warm air in a quiet and comfortable environment.
• 【Product Warranty】 If you have any problems or are not satisfied with the product during use, please contact us in time for replacement and refund.

Product description

Magic Heat is the only UL listed heat reclaimer on the market. Magic Heat reclaims up to 30% of lost heat form your heating appliance and distributes it into your home using only .31 amp of power, roughly equivalent to a 40 watt lightbulb. Magic Heat is designed for heating appliances with inside flue temperatures exceeding 350 degrees and surface temperatures of the single wall pipe below the Magic Heat exceeding 280 degrees. The bottom crimp design makes this unit ideal for wood burning heating applications by containing any creosote within the chimney. A toggle switch allows the 225 CFM fan to operate in two modes, either run continuously or a pre-set thermostat automatically turns the blower fan on when the Magic Heat casing reaches 150 degrees and off at 120 degrees. Magic Heat is easy to install and must be installed between 12 and 24 inches from the appliance flue outlet using single wall connector pipe. How it works: As hot flue gases travel from your heating appliance upward through the flu, they heat the transfer tubes in the inner case. Fresh room air enters thru the back vents and is heated while traveling through the transfer tubes. The 225 CFM fan pushes out the warmed air through the tubes and into your home reclaiming up to 30,000 British Thermal Units (BTU) of lost heat. Flue gases are not restricted and continue up your chimney. Magic Heat is available in 6", 7" and 8" pipe diameters for wood, oil/coal or natural gas burning heating appliances. Manufactured in the USA.

• Only UL listed heat reclaimer on the market. Reclaims up to 30% of otherwise lost heat going up your chimney and distributes it into your home.
• Crimp down configuration is designed for use with wood burning heating applications with inside flue temperatures exceeding 350 degrees and surface temperatures of the single wall pipe below the Magic Heat exceeding 280 degrees.
• Easy to install. Fits 6" flue diameter. Built in soot scraper cleans tubes internally allowing for maximum heat transfer.
• Plugs into any standard 110V household outlet. Removable back allows for easy maintenance. Designed for use with single wall connector pipe.
• Toggle switch allows the 225 CFM fan to operate in two modes, either run continuously or thermostat control mode. Made in the USA. One Year Limited Warranty.

User questions & answers

Question:	Can you use stove if the power goes out
Answer:	It's meant to be programmed to a garage door. Doesn't interfere with any other programmed opener. Easy directions. I programmed mine to daughters 2 car garage, different codes for each door...do 1 at a time per directions.
Question:	Can I mount unit closer than 12” to top of wood stove
Answer:	Multibutton transmitter (remote control). Compatible with all Overhead Door CodeDodger (abbreviation: CD. CD/A or CD/B) and Genie Intellicode garage door openers.
Question:	Does this work best with non-catalytic stoves
Answer:	Yes, purchased a new OCDTR-3 remote a couple months ago for my Overhead Door OCG550 Python which was installed in 1998. Please note that as mentioned on-line by others, only the far right hand button on the remote operates the door but that's good enough for me!
Question:	Do you ever have to take the unit off to clean? Or is that middle knob that pulls in & out, does the cleaning for you
Answer:	If it is an Overhead Model door and has a programmable button on the back of the motor it should work. I can't guarantee it 100% but it should work.

Product features

How It Works

As hot flue gases travel from your heating appliance upward through the flue, they heat the transfer tubes in the inner case. Fresh air enters through the back vents and is heated while traveling through the transfer tubes. The 225 CFM fan pushes out the warmed air through the tubes and into your home reclaiming up to 30,000 BTU of lost heat. Flue gases are not restricted and flow up your chimney.

Use Magic Heat to Save Lost Heat!

• Magic Heat’s ten heat transfer tubes maximize the surface area required to effectively exchange heat. The built in soot scraper cleans tubes internally allowing for maximum heat transfer.
• Magic Heat is the only UL-listed heat reclaimer on the market because it does not reduce the flue diameter. The open inner casing design allows hot flue gases to travel upward without restriction.
• Easy to service with removable back. There’s no need to dismantle the Magic Heat in order to service or clean it.

Magic Heat - Improving Your Life and The Life of Your Home

The only UL Listed heat reclaimer on the market - Magic Heat will reclaim up to 30% of lost heat from your stove, and distribute it into your home. Maximize your heat transfer and turn cold into comfort with Magic Heat.

Designed for use with all types of heating equipment with inside flue temperatures exceeding 350 degrees, skin temperatures of 280 degree measured below the Magic Heat.

Available in 6", 7" and 8" pipe diameters. Manufactured in the USA.

Why HY-C?

HY-C people are passionate and committed to high performance. We are here to provide safety, security and sustainable living products to improve your life and the life of your home.

HY-C has been protecting homes and families since 1947 with home improvement products including chimney covers, stove boards, firewood management solutions, nuisance wildlife control screens, and cast iron fireplace accessories. Recent additions to the lineup include the LintEater and SootEater dryer vent and chimney cleaning products. The Magic Heat heat reclaimer and Flame Genie pellet fire pit also have recently joined the HY-C family.

Because we manufacture almost all of our products here in the United States, our customers are not waiting for containers that are ‘on the water.’ We provide what you need when you need it.

Product description

About us :

Our factory is engaged in kind various of cleaning supplies, we have a professional design team.

How Does the Stove Fan Work? 1. Put the fan on the fireplace and wait for the base temperature to reach 60 degrees, the electro-thermal conversion module starts to start and generates current

2. The power generation module continues to work, generates current and drives the motor, and the motor drives the fan to rotate the blade.

3. The continuous rotation of the fan will keep the heat generated by the fireplace continuous, efficient and energy-saving, so as to quickly let the heat convection in the whole space.

The feature of product:

No electricity is needed, and the heat source of the fireplace is fully used to convert it into power.

The more fire, the faster the fan blades turn, and the heat is quickly transferred to every corner of the room.

Ultra-quiet, say goodbye to the noisy electric fans!

Maintenance-free, just add a little oil to the bearing regularly to play the role of lubrication to ensure the smooth rotation of the fan blades!

Over-temperature protection: When the temperature reaches 350 ° C, the metal shrapnel at the bottom will lift the fan to protect the fan motor from damage!

• 【Blade stove fans operating temperature】The unique blade design makes the fan work more efficiently. No installation, no trouble, no battery or power supply! The general working temperature of the stove fan is 85°C - 350°C(185°F - 660°F). Usually the fan gets spinning at about 58°C, and turns most efficiently when the temperature reaches about 250°C-300°C.
• 【Fireplace Fans Material】The furnace fan bracket is made of high-strength aluminum alloy, which will not deform or change color even if it works for a long time at high temperature. The fan is durable and can be wiped clean with a damp cloth.
• 【Heat powered fan energy saving】Thermoelectric module acts as a small generator to power the fan's motor. No batteries or electricity required! Efficiently drive warm air throughout the room. Reduce the fuel consumption and more efficiency.
• 【Wood stove fireplace fan】Newly Designed Blade, Larger Air Volume, Lower noise. You don't even know the stove fan is there, but you feel the warmth! You will enjoy the warm air in a quiet and comfortable environment.
• 【Product Warranty】 If you have any problems or are not satisfied with the product during use, please contact us in time for replacement and refund.

Product description

Does your grate burn up after a year or two? Is it constantly breaking? Are you sick of buying a new one every season? We have the solution to your grate troubles. The Deep Forest Lifetime Grate...it is the last grate you will ever buy. It's made of 1" wide steel bars that create durable support for holding your wood and coals. This grate also has legs that measure 3 1/4" to allow proper airflow for a even burn. Deep Forest Lifetime Grates are made of the finest steel to withstand intense heat and everyday usage, which is why they are guaranteed by the factory not to burn out for a lifetime. The Lifetime Grates are shaped to fit most fireplaces and comes in many sizes, with the availability of custom sizes as well.This heavy-duty grate has a lifetime guarantee by the factory not to burn out. It will withstand intense heat and everyday usage. Grate dimensions: 36" Front x 32" Back x 17 Depth overall height is 8 3/4" basket height is 4 5/8". Weight: 53 lbs.

• Grate dimensions: 36" Front x 32" Back x 17 Depth overall height is 8 3/4" basket height is 4 5/8"
• Country of Origin: United States
• This heavy-duty grate has a lifetime guarantee by the factory not to burn out.

User questions & answers

Question:	what is the depth from the bottom of the grate to the bottom of the fire box? I have a gas rod and want to make sure there will be enough clearance
Answer:	No this will not work. This product is designed for water systems. You will need a coating or a special paint for your car.
Question:	What is the depth of the 'fire basket' -- ie from the floor of the grate to the tops of the bent retaining arms? Thanks
Answer:	Yes this inhibitor protects brass

Product description

The US Stove Company US1269E is a rustic, heavy duty, cast iron constructed, wood stove that is ideal for any rugged outdoorsman, those with a nostalgic taste, or someone simply looking for reliable, cost efficient, heating. Inside this rugged exterior is a modern 2020 EPA certified wood-burning stove providing a clean burning heating solution. It is perfect for log cabins, large garages and shops. This stove is durability defined. Tested and certified to U. L. 1482 by Warnock Hersey international for greater peace of mind and safety assurance. The US1269E has unequaled life expectancy and is easy to use. The US1269E replaces previous US Stove model 1269E wood stove.

• 54, 000 BTUs heats up to 900 Sq. Ft.
• 2-Piece safety handle remains cool while the stove is burning while heavy duty cast iron construction provides classic style with modern technology
• Accepts logs up to 19" in length
• Integrated 6. 25 inch cooking surface on top
• Not approved for use in mobile or modular homes

User questions & answers

Question:	Where is the damper at
Answer:	It should not matter remember slid cleaner a lot or will start building up. It will amaze you how much more heat you get. Just keep it clean.
Question:	Can it be used for outdoor
Answer:	The middle knob does all the cleaning. You don't take it off!
Question:	does itave fire bricks and need assembly
Answer:	No this product is not suitable for that type of application.
Question:	What size pellet box can i use on this
Answer:	Yes the product can be used in that application.

Product description

Reinvent the way you heat your home with the Castle Serenity Wood Pellet stove and new smart controller. The smart controller allows you to choose manual, thermostat and Weekly operational modes to heat your home on your schedule. As with any Castle Pellet stove, you'll experience affordability, style and practicality. Its space-saving shape and attractive design will make it a welcomed addition to any room and with the new smart controller heating your home efficiently on your terms has never been easier.

• Reinvent the way you heat your home with Castle's Serenity wood pellet stove and new Smart Controller
• The Smart Controller allows you to choose manual, thermostat, and weekly operational modes to heat your home on your schedule, Along with calendar and time based heating options, you can also set a local thermostat or manually set it on one of five burn levels
• As with any Castle Pellet Stove, you'll experience affordability, style, and practicality. Its space-saving shape and attractive design will make it a welcomed addition to any room, and with the new Smart Controller, heating your home efficiently on your terms has never been easier
• The Serenity Stove is designed to be easy to clean - there are no tubes, corrugations, or hidden chambers
• Operating Wattage 77 Watts (W), Voltage 120 Volts (V), Greater than 69.8% thermal efficiency, 1500 square feet heating capacity

User questions & answers

Question:	where do you install the kit.in the wall or window
Answer:	All the scents are very aromatic and pleasing. It is difficult for me to compare any of the scents to familiar fragrances.
Question:	How big is the hopper
Answer:	YES, they are!
Question:	how do you clean it
Answer:	You might have to contact the seller. I have never seen multi packs of the same scent.
Question:	Can the stove be hand-stoked if the electricity goes out
Answer:	Hi Elaine. There are exactly 20 sticks per box; a total of 120 sticks. Hope this helps

Product features

Easy Installation

The Serenity stove requires very little assembly compared to other stoves. Its compact design allows it to fit into the smallest of spaces. For the Do-It-Yourselfer installation is easy. The manual explains the installation process. Installation generally takes less than two hours. The Castle Pellet Stove is mobile home approved and EPA certified to comply with state and local regulations in most areas. There’s no need to waste dollars on a chimney or flute as this unit can be direct vented.

Programmable Controller

Adjust your heating needs to your lifestyle. The Serenity features a 24-hour programmable controller for each day of the week that has the ability to cycle on and off and adjust to a built-in thermostat depending on when heat is needed. The house can be warm when you wake up and when you come home from work, while remaining cooler during the day and at night while you sleep. Along with calendar and time based heating options, you can also set a local thermostat or manually set it on one of the five burn levels.

Easy Clean

Designed with convenience and ease in mind. All pellet stoves need to be cleaned; most have hard to reach chambers that build up ash that impairs the stoves ability to transfer heat. There’s no need to remove panels or disassemble parts to clean. Simply dump the easy-to-access firepot and ash pan, and sweep out the exhaust pipe.

High Efficiency

Heat more with less fuel. The innovative heat exchanger in the Castle Serenity was modeled after the fins on air-cooled engines, which provides for 2.5 square feet of additional surface area for maximum thermal exchange in a compact space. The design is both unique and functional because it allows the inside of the stove to be smooth for easy cleaning and minimal ash build up, while exchanging an incredible amount of heat produced by the burning wood pellets. While other stoves are blowing your hard earned dollars outside, the Serenity stove keeps all of your warmth inside.

Product description

It’s great to have a tent stove, because it provides a cooking place for your camping house, so you can be unaffected by any elements. The equipment is ideal for camping in cold weather. Most importantly, it is convenient. You don't have to leave the comfortable space of the tent to put the camping kettle or camping coffee pot on the stove to make coffee in the morning.



Features

Sliding Intake Control - Adjust the air flow in the stove, Control the intensity of the wood burning.

Collapsible Legs - Connective legs provide a stable base for the stove.



Package Include

Stove x 1

Fire Poker x 1

Handles / Side Shelve Bracket x 2

Side Shelve x 2

Flue Pipe Section x 6

Ashes Catch Tray x 1

Collapsible Leg x 4



Materials

Stove: Carbon Steel

Flue Pipe: Stainless Steel



Dimensions

Stove Body: 11.14" L x 7.95" W x 8.66" H

Flue Pipe Length: 14.17" x 2, 10.23" x 2, 9" x 1, 5.32" x1

Flue Pipe Diameter: 2.36"



Notes

- Wear gloves when assembling the tent wood stove. Sometimes there are sharp edges on the pipes and stove that can cut you.

- It is your responsibility to ensure the shelter and tent used has the appropriate fire retardant qualities necessary. We advise not to leave stoves unattended and to make sure it has been extinguished prior to sleeping. Always make sure the stove is stood on something fire retardant, as accidental sparks may go straight through the groundsheet.

• High Heat Output: the stove can quickly reach a temperature, act as a heater to provide warmth and heat to a space in outdoor camping trips.
• Sectional Stove Pipes: 6 pieces pipe, the maximum height is 4.69 feet, diameter is 2.36inch / 6cm. The height can be adjusted to suit different space, like tipi-tent or tiny house.
• Multi-function: The flat top of the stove is your cooking surface. The wood burning stove can be used to cook just about anything a you can cook on the range in your kitchen.
• Easy to Use and Safe: Camping wood stoves use natural fuel sources like firewood, twigs, wood chips etc. Be vertically vented by running the flue pipe out of the top of a tent.
• Detachable and Portable: The whole stove adopts a detachable design scheme. You can easily remove the collapsible four legs and chimney pipes, it's easy to store and carry.

User questions & answers

Question:	Could it be used in an rv? Safely
Answer:	Not sure , I'm using mine in a garage with block walls .but it has ben used in tents with the proper venting and fire retardant
Question:	How do I get the door vent to open
Answer:	It should slide left and right with the knob
Question:	What diameter is the stove pipe
Answer:	About 2.36 inch
Question:	Whats it made out of? Titanium or steel
Answer:	steel.

Product description

Attaches to stove pipe and reclaims heat normally lost up the flue. Whisper quiet, safety tested UL fan motor gently blows warm air into the room. Thermostatically controlled, turns on at 160 Deg. Fahrenheit, off at 130 Deg. Fahrenheit. Decorative nickel trim.

• Fits 6in. stovepipes

User questions & answers

Question:	Where are the holes located on the motor for the oil
Answer:	Hi Janice, we have this grate. There is 4" of clearance. We don't have gas so I couldnt say if that provides enough clearance for your needs.
Question:	Installed couple weeks ago. I just notice the fan is not working. Is there a switch
Answer:	There is about 3 1/2" clear under the metal running side to side, about 4 3/4" to the top of the metal the wood sits on, about 9" to the top of the front tines holding the wood in. I think the back tines are about the same, but with it full of wood for the next fire, I can't see them to be sure.
Question:	Do you think it will work on a oil drip furnace by nestor martin
Answer:	Yes. of course if power is out the fan is not gonna work.
Question:	Where is this made? you would think us stove products would be made in the u.s. but i think it is made in china
Answer:	Our UL approved installation calls for at gap, between the top of the stove and the bottom of the Magic Heat, of between 12” and 24”. (See manual) Too small a gap would expose the electrical components, such as the thermostat, to potentially too much heat, and ruin them.

Product description

No Need to Sit So Close to the Fire Anymore! If you own a fireplace or wood burning stove and you would like to get MORE HEAT throughout your house but you DO NOT want to spend more money on electricity - all you have to do is get one of these amazing heat powered fireplace stove fans, and you will be warm and toasty for FREE! That is because this fan does not use ANY electricity. Just set it in the right place, and the heat from your fireplace or stove will turn the fans and blow HOT AIR exactly where you want it! If you have a large room or large house to heat, you already know that a FAN is the best thing for getting the heat to be dispersed throughout your living space. It does not even require maintenance – except for occasional dusting! Plus, the fan acts as an indicator that your fire needs to be stoked. When the spinning starts to slow down, you automatically know that it is time to stoke the fire with more wood! No assembly required. Lasts forever. Makes a great winter housewarming gift!

10 YEARS LIMITED MANUFACTURE WARRANTY

• SAVE MONEY ON ELECTRICITY! No electricity required. Works off the HEAT produced by your fireplace or wood-burning stove. The hotter the fire, the faster the blades turn. Therefore, more warm air gets dispersed throughout your house!
• WHISPER-QUIET! 170-190 CFM Above 900 RPM and MAX Temperature of 644 F (340 C) The only moving part is the blade assembly. Say good-bye to the loud noise of electric forced-air fans! You won’t even know this fan is there – but you’ll FEEL the WARMTH!
• MAINTENANCE-FREE! Just dust it off occasionally, and put some light oil on the blade shaft to keep it spinning smoothly and quietly!
• “BUILT-IN” FIRE-STOKING INDICATOR! Because this fan operates on HEAT, you’ll automatically know it’s time to stoke the fire when the fan slows down! The higher the heat, the faster the blades spin. So when they’re slowing down and you’re not feeling the heat as much as before, it simply is telling you to stoke the fire! What could be easier?
• SAFETY PLACEMENT OF FAN - Fan should be placed on the back of the stove (not in front) 6 inches away from the stove pipe
• material type: Metal

User questions & answers

Question:	I have a small Woodburning FP. It faces NW. Can I mount at exhaust vent to push hot air up chimney , to stop blow backs
Answer:	My didn't come with a damper. That's something you'll probably have to add on your own. Although the company that makes the stove also sells dampers as accessories.
Question:	where is it made
Answer:	I don't see why not. But it's very heavy and should be covered when not in use. The cast iron will rust eventually if it gets wet.
Question:	what is the max temp for the fan
Answer:	no fire bricks, have to screw on legs and exhaust outlet. blocked bottom air inlet with aluminum foil, front air inlet is best, drilled some holes in ceramic board baffle at inside top of burn chamber for bettet exhaust flow to outlet.
Question:	what temp do it start turning
Answer:	It is a log wood stove not a pellet stove

Product description

Enerco, based in Cleveland Ohio, has been at the forefront of infrared combustion technology since 1957. This market leading technology has allowed Enerco to build expertise in consumer heating products as well as heavy duty commercial and construction heating products. Starting in 1984, Enerco’s Mr. Heater Brand has delivered innovative technology and unmatched quality and service as America’s Most Popular Brand Of Heaters. From its Original Tank Top Series to its patented Buddy Heaters, millions of consumers have enjoyed high quality comfortable heat. Mr. Heaters Contractor Series Forced Air Propane and Kerosene Heaters have become the industry standard for dependability while its unit heaters have expanded the garage to usable workspace in the winter months. 2011 marked the launch of HERO-The World’s First Cordless Forced Air Propane Heaters featuring Quiet Burner Technology. Through innovative products, innovative marketing, and world class customer service, Mr. Heater is leading the way in portable heat!

• Industry standard for dependability
• Innovative technology
• Unmatched quality and service

User questions & answers

Question:	What size stove pipe does it use
Answer:	If It did have oil holes they are located on the motor end plates. A flashlight may help you locate them easier. Be aware that some times the oil holes may be locate on the side or bottom while being mounted in place. You may have to unplug the unit and remove it from the pipe to ease access to service it.
Question:	Is the door sold separately or what
Answer:	There is a thermostatically controlled switch inside of the box. All you have to do is plug it in and build a fire, once the temperature gets high enough it should kick on automatically. If you start noticing a rattling sound after a while, there is an allen screw that holds the blade on the shaft of the motor. You can remove the side panel and tighten it up. I had to do that to mine.
Question:	Add states fuel is “gas” and list propane & kerosene. can it be converted to natural gas ? also does the igniter come with the kit
Answer:	As long as the pipe size is the same on the oil stove and it burns clean, I believe it would be fine to use. Keep in mind there isn't a way to access the inside of the heat reclaimer to clean build-up except through the stove pipe so you might want to use a section of telescoping pipe to make it easier on yourself.
Question:	Does it come with both barrels
Answer:	I have no idea where it is made. All that I know is that mine was UL listed

Product description

On a cold night, warm up to 1,000 square feet with this infrared quartz electric stove. The infrared quartz heat helps to maintain the natural humidity in the air, resulting in comfortable heat that doesn't dry out the room's air. This electric stove features a durable metal body construction with side viewing windows and an operable, beveled glass door. Patent pending 3D flame effect technology offers a layered flame effect to create a truly realistic fire experience with five adjustable brightness settings. The realistic flame effect with a glowing log and ember bed can be operated with or without heat, providing the ambiance of a gentle rolling fire all year long. This stove is easy to assemble and can be operated with the control panel on the unit or with the included remote. Manufactured and distributed by Twin-Star International, Inc., under license from Duraflame, Inc. duraflame, the flame symbol and logo are registered trademarks of Duraflame, Inc.

• 5,200 BTU heater provides supplemental zone heating for up to 1,000 square feet to help you save money
• Patent pending 3D flame effect technology features realistic flames that dance on and behind the logs, including five adjustable color, brightness, and speed settings
• The infrared quartz heat helps to maintain the natural humidity in the air, resulting in comfortable heat without drying out the room's
• Overheat protection, heater will instantly shut off to prevent overheating. Volts : 120. Amps : 12.5
• Adjustable, digital thermostat allows you to decide the temperature of your room

User questions & answers

Question:	Can the flame feature be turned off for use at night in a bedroom (so the room stays dark
Answer:	Yes, the moving flame feature can be turned off. The logs maintain a very slight glow, that does not disrupt sleep if you wake up in the middle of the night. It's awesome.
Question:	What kind of functionality does the remote have? Does it have a timer to turn on
Answer:	The remote has four function buttons: power; flame setting; temperature; timer. The flame height can be adjusted from 1 to 5; level 1 is lighted embers, level 1 is a low flame, etc. The temperature can be set in increments of 2 degress from 62F to 82F. The remote will allow you to see what the temperature is set at, but you have to adjust it manually from the control panel. The timer can be set to turn the unit off, but not on. It starts at 30 minutes and increases in hourly intervals from 1 hour to 9 hours. Unlike the temperature, the timer can be set with the remote. Your local hardware store might have a timer you could attach to it to turn it on automatically. I don't know that for a fact, but I don't see why it wouldn't operate similarly to any other electrical appliance that can be used with a timer.
Question:	How much does it cost per hour to run
Answer:	It's a very good and responsible question, and yes, there is a way to answer it. It requires you check your electric bill and so some math, but you really only have to do this once. You're going to calculate how much you pay per kilowatt hour (kWh) which really is just how much it costs to run any electrical item in your home for each 1,000 watts. STEP 1: Find your most recent electric bill, look for any charges that are based on killowatt hours (kWh). For example... I live in NYC, and my probably outrageous bill had (Supply @9.1811 cents per kWh) + (Delivery @12.0324 cents per kWh) + (Clean Energy Benefit @ 0.6811 per kWh). I also note that Sales Tax is 4.5% and write all these down. STEP 2: Add them all up then apply sales tax. So for my bill, I get (9.1811) + (12.0324) + (0.6811) = 21.8946 cents per kWh. To factor in the Sales Tax of 4.5%, I calculate (21.8946) * (1.045) = 22.87986 cents per kWh. I round this up to 23 cents to make it easy, so that means it costs me 23 cents per hour to run a 1,000 watt appliance. STEP 3: Multiply your hourly cost by this appliance's wattage. The details indicate this is heater is 120 Volts at 12.5 Amps. To calculate watts is just (volts) * (amps). So (120 volts) * (12.5 amps) = **1,500 watts**. NOTE: this is very typical for major appliances such as air conditioners, space heaters and even running a clothes iron. With that in hand, multiply the kWh cost from STEP 2 by the wattage of this heater. So for me, since it costs me 23 cents per kWh to run something, that means at 1,500 watts it would cost me (23 cents * 1.5) = 34.5 cents to run this heater every hour. Yes, I rounded up a bit earlier (my real cost is 34.31979), but I like to overestimate just a little to play it safe. STEP 4: Multiply your cost to run this hourly by how many hours you might run it. This is where it gets very controversial because I think most people do not understand their own energy costs or usage and get a shock (no pun intended) from their electric bill. Let's say I run this heater 6 hours per day in a 30 day month. That's 180 hours * 34.5 cents per kWh = $62.10 just to run this one heater. STEP 5: Think about how you're heating your home. Remember that 1,500 watts is VERY common for major appliances as noted above, and other smaller heaters might be around the same, or possibly 1,000 watts. Let's say you're a family with a space heater in each room to keep people warm. Let's imagine those space heaters were 1,000 watts each. That means at 3,000 watts, you'd be paying DOUBLE in electrical costs instead of just having the family huddle together near this large heater in the living room. Summary: Do some due diligence and check your electric bill charges per kWh, then check the wattage of each heating appliance and do some simple math according to many electrical appliances you are running to heat your home. This exercise seriously shouldn't take too long to do, and you can use this same method to understand what it costs for air conditioning in the summer, and even how much it costs to run giant flat screen TVs or computers. Though for those panels it's far less... my 55" flat screen TV runs at 250 watts max, and my computer about 300 watts with monitor, computer and max gaming settings. Heating and air conditioning are what crush your electric bill, so do this and you'll see how valuable it is to have one large machine doing heating/cooling for a large area rather than multiple individual ones. PS: I haven't even bought this yet, but I wanted to help educate the person who asked the question, because this is a VERY important thing that so many people don't do, and I don't like seeing people throw money away. IMO, this is a very good purchase just for saving on electrical costs.
Question:	is it noisy
Answer:	Yes the machine is noisy. When the heat is on there is a low drone which isn't bad and is to be expected. The noise from the heater isnt the problem. It's when the flames and heater are on but the heat kicks off bc the room is at the desired temperature. At this point the flames make a very loud and annoying sound. If you lower the flames to the lowest setting this noise too will go away.

Product features

duraflame DFI-5010-01 Infrared Quartz Fireplace Stove with 3D Flame Effect Stove with 3-D Flame Effect

The Duraflame Infrared Quartz Fireplace Stove is the perfect addition to any room, especially in small living spaces, to add heat exactly where it’s needed. It’s convenient, easily portable, and good for use around children and pets.

This Infrared Quartz Fireplace Stove is easy to move wherever it’s needed and infrared heat helps maintain the natural humidity in the room, for a comfortable heat that doesn’t dry out the air.

Realistic 3D Flame Effect

Watching the flames dance just got better with our patent-pending 3D flame effect*. Flames dance on and behind the logs, with five adjustable brightness settings that feels like being in front of a real wood-burning fireplace, without the mess and hassle. Five adjustable brightness settings let you customize the look of the flame effect to suit the room, the weather, even your mood.

*3D Flame Effect: US 15/155,316

Year Round Ambiance

As the outdoor air temperature changes, you can enjoy the relaxing quality of the dancing flames and glowing ember bed of a fire year-round without getting too warm. A great addition to your decor, your electric stove heater creates a stylish atmosphere no matter the season when you use the flame effect even without heat.

Infrared Advantages

Like standing in the rays of the sun, infrared technology produces heat that warms you instantly, even as it heats a large area. Plus, infrared heat helps you create a healthier home environment because its gentle heat maintains natural humidity in the air, rather than drying air out, so your family’s skin and airways don’t dry out either. Infrared heating also reduces static electricity, unlike traditional heaters.

Zone Heating Saves You Money

Zone Heating is a simple way to save money. In many homes, certain rooms, like bedrooms, dens, and basements, may not be occupied all day long. With zone heating you can shut off heated air blown in different sections, or zones, so unoccupied space doesn’t get heated. Turning down your thermostat by 10 – 15 degrees for 8 hours can bring you significant savings.*

*Energy Information Administration.

Zone Heating is Green

Zone heating means your family can be more energy efficient by heating only the rooms that are occupied at any given time thereby reducing carbon footprint and doing your part for the environment.

Zone Heating Gives You More Choice

Zone heating gives each member of the household more control to keep the room they’re in set to a comfortable temperature for them.

Zone Heating Helps Extend Furnace and A/C Life

Zone heating can even help to reduce wear and tear on your home’s heating and air conditioning unit, helping you extend the life of your home’s climate control systems.

• Upgraded 5-Blade will provide larger air volume, diverting the warm air horizontally all around your house but not give you the hot wind directly. The way making it the most efficient way to heat your room from your stove, widely used for wood burning stove, gas stove, pellet stove and more. A magnetic thermometer included to monitor the temperature of your stove
• No batteries or mains electricity required, the moelectric module acts as a small generator to power the fan's motor. The fan base and blade are made from anodized aluminum which is rust-proof, wear-resisting, with good thermal conductivity
• Silent operation, spread heat around room and increase temperature with low noise, improve warm air circulation results in greater comfort and reduce wood consumption from your stove. More stable and environmental protection
• Overheating protection, the in-built bi-metallic strip at the base of the stove fan is designed to raise the edge of the fan slightly as the maximum operating temperature is approached to protect the motor and the moelectric module
• Recommended surface temperature is between 158°F - 644°F (70°C - 340°C). If the fan doesn't run in time after reaching the temperature, please move the blade slightly (do not touch it directly with your hands. The maximum temperature that the product can withstand is 350-400 degrees. Exceeding this temperature may damage the motor. Please test the temperature of the fireplace before purchase and pay attention to monitoring the temperature change during use

User questions & answers

Question:	After 2 weeks, our fan discontinued to work. i need to return it. please give me an address. inferior product. stove temp below 240 degrees. sev
Answer:	That happened to me after 2 months also. I contacted customer service Amazon and it was replaced
Question:	Will these work on a wood stove insert
Answer:	It should work as long as there is enough clearance to sit the fan on TOP of the stove so that the fan can blow the heat into the room. See the fan dimensions listed in the details. Note that this fan does not blow air with the force of an electric fan, but it works well... even when the electricity is out or where an electric fan cannot be used (like on top of a hot stove). It is worth it IMHO. I use it on top of my kerosene heater.
Question:	How would one go about making it so the fan doesn't get overheated since my woodstove top runs on an average of 700 degrees
Answer:	The fan doesn’t over heat. There’s no motor or anything to overheat. I’ve got a buck stove & it works fine on mine & my wood burner stove gets. Over 700 degrees
Question:	Whats the cfm on this
Answer:	A less-than-technical answer is that I'm not sure it will move a cubic foot in a minute! I don't feel any discernible air movement from 3' away, even when my stove's top is @ 600 degrees. After a month or so I've come to think of it as a cool looking little whatnot that sits on my woodstove....

Product features

Upgrade PYBBO 5 Blades - More Power

Upgraded 5 blades circulates more warm air (Max 380CFM) into your whole home, perfect for all-size room. Just put on the top of stove, the fireplace fan will work when the stove surface hotter. More warm air than 2-4 blade, fan starts to rotate when temperature reach 70°C (158°F). The hotter the fire, the faster the blades turn.

It equalizes the warmth produced from your wood burning stove around the room, that’s why a stove fan is a great idea.If you want to push the hot air from your wood stove around the space more effectively then a stove fan is a really good idea. Many homes that have classical install iron fireplaces that have a limited space on the top. However,many stove fans in the market are not suitable for these homes.

If the fan works under the high temperature for a long time, the color of base may turn white or gold. It will not affect to use, but if you don't like that please let us know as soon as possible, we will help you.

DO NOT TOUCH!

Never place the fan on an unprotected surface if the fan base is still hot.

Hot while in use, do not touch beware of rotating blades.

To move or carry the fan, always use the extendable handle while wearing gloves.

KEEP AWAY FROM CHILDREN AND PETS!

Please keep fan away from small children when in use.

Ensure childen and pets are supervised around your stove.

Keep all obstacles at a distance while the fan in use.

THE BEST POSITION!

Always use a stove thermometer to monitor the operating temperature.

Do not place in front of chimney, keep distance at least 4''.

Please make sure that the wood stove fan is placed on a flat and level surface.

Product description

6", 6RV-RT, Round, Type B, Gas Vent Top. Top round for gravity draft venting of LP or natural gas burning appliances. This is not for wall furnaces or wood burning applications. Inner wall aluminum, outer wall galvanized. 100 million BTU per hour. 500 F maximum. External screen prevents entry of most bird species.

From the Manufacturer

6", 6RV-RT, Round, Type B, Gas Vent Top. Top round for gravity draft venting of LP or natural gas burning appliances. This is not for wall furnaces or wood burning applications. Inner wall aluminum, outer wall galvanized. 100 million BTU per hour. 500 F maximum. External screen prevents entry of most bird species.

• 6", 6RV-RT, Round, Type B, Gas Vent Top
• Top round for gravity draft venting of LP or natural gas burning appliances
• Not for wall furnaces or wood burning applications
• Inner wall aluminum, outer wall galvanized
• External screen prevents entry of most bird species

User questions & answers

Question:	Why can't this be used for a woid burning stove? I want to prevent rain in an old stove that I use for burning paper, card board, etc. A trash burner
Answer:	Hello,I think it can't work,as it's a heat powered stove fan,which only can be put on the top of the stove,work by the temperature difference between the bottom and top of the fan,circulates the heat into the whole room.
Question:	what is the actual I.D. of the inlet pipe
Answer:	Made in China. Just so you understand my review........ this fan does not work the blades moved slowly for a few minutes then stopped turning. I waited to long before trying to return it. Know I have a cool ðŸ~Ž looking fan that does not work!
Question:	Will the work for a propane fireplace
Answer:	The 4 Blades stove fan can handle a maximum temperature of 644 F (340 C) rotate at more than 900 RPM and push 170-190 CFM Airflow
Question:	Can you use it for a rain hood on top of a house for the furnace
Answer:	Fireplace fan can start working already when the fan is heated to 122 F (50 C) and the heat powered fan operates perfectly when he reaches a temperature of 240 F. Please be aware that although stove might be at this temperature range already the fan metal body will need more time to heat up and reach this temperature in order to start operating. You can also give the fan blades a light push in order to start the fan operation.