10 best mount it floor standing speakers

Product description

Satellite or Surround Sound Speaker Floor Stands





Looking for a satellite or surround sound speaker floor-stand to enhance your surround sound in any room? The MI-1214S is perfect because you can simply place the speaker stand anywhere on the floor. This set of floor stands has a sleek, compact, low base design with the ability to adjust the height of the stand to amplify your speaker sound quality. This set is great for any room, especially a home cinema or living room



Easy Installation



The MI-1214S is easy to set-up, simply run your speaker wire cable through the pole and screw on your 5 pound or less speaker onto the mount. This speaker mount is compatible with most small satellite speakers or surround sound speakers with a single thread or a keyhole fitting. For a better sound response, it is usually recommended to mount these speakers about 1-2 feet away from the wall, to allow the ports to work properly.



Construction



The stands are constructed with a heavy-gauge cast iron base with four feet for stability to support 5 pound speakers and it is height adjustable from about 26.8" to 43.3", allowing you to mount the speakers at your ear height when sitting.





Please Note



The cable pass through the pole will not be possible with speakers that have special connectors. These special connectors should be connected to the cable only after the cable has run through the pole. In addition, these stands are not compatible with speakers with mounting holes located at the bottom, top or left/right side of the speaker. The mounting holes must be on the back of the speaker to be compatible with this stand.

• UNIVERSAL SPEAKER FLOOR MOUNTS - Premium and universal speaker stands (4 Stands) for home theater system satellite speakers. Ideal for front pair and rear pair positions for a 5-speaker setup.
• IMPROVED ACOUSTICS - Floor-standing attractive, sleek design lets you put speakers in the best position for sound quality. The heavy cast-iron base has four legs provides stability, even on thicker carpets.
• COMPATIBILITY - Surround Sound Speaker Stands compatible with most speakers on the market such as Bose Acoustimass, Bose Cinemate, Jewel Cubes, Lifestyle Speakers, Samsung, Klipsch, Yamaha, Polk, JBL, Panasonic, etc.
• MULTIPLE SPEAKER ATTACHMENT METHODS - Including keyhole style, single bolt or screw type. Mount speakers using 1/4-Inch x 20 mounting screws or keyhole mounts; Fits Single Thread Type Fitting, all hardware provided.
• ADJUSTABLE HEIGHT SPEAKER STAND - The pole height is adjustable from 26.8-Inch (680mm) to 43.3-Inch (1100mm), to place your speakers at optimal height for stereo or surround sound. Heavy-gauge offset steel pillar features integrated wire channel for cable management system through middle of stands.

User questions & answers

Question:	Does this stand work for energy take classic 5.1 speakers
Answer:	Don't waste your money. Buy the Sanus floor speaker stands. These are supposed to hold the weight of the Take Classic speakers but just fall over.

• Pair of speaker stands for satellite / surround sound home entertainment centers. Thick tempered glass supports 22 lb of weight per speaker. They are universally compatible with any speaker under that capacity
• Hollow center pole with cable management access so you can hide your cables / cords out of sight!
• Heavy-gauge aluminum alloy along with a sleek tempered glass construction. Top shelf has quarter-inch thick glass
• Mount-It! provides all of the necessary hardware, tools, and instructions for easy installation!
• Dimensions: Top shelf 8 x 8. Bottom shelf 10 x 10. Aluminum pole is 23 tall

User questions & answers

Question:	are they tall enough for the back surround speakers
Answer:	They are 2 ft tall and our speakers are 2.5 ft tall, they work well for us. tall
Question:	How much do the spiked feet rais the base from the floor on a wooden floor. Sourcing rubber feet to use insted. Thanks
Answer:	Only about 1/2 an inch. However they are metal and meant to fit into carpet to secure the stand. On wood floors they are likely to slide causing damage to the floor and possibly the speakers should they tip over. Rubber feet would definitely be better for wood floors.
Question:	will these stand hold bose 901 speaker
Answer:	901's would be too heavy for these stands.
Question:	Can the center column hide the speaker cord
Answer:	Yes it can. The aluminum tube is slit at either end

Product features

Mount-It! Floor Speaker Stands for Satellite Speakers and Surround Sound (5.1 and 2.1) Systems, Glass and Aluminum, Black

Use Mount-It! MI-58B pair of speaker stands to elevate your speakers for optimal audio performance and expanding decorating options while keep your speakers stable and secure.

MI-58B pair of universal bookshelf speaker stands are heavy-duty and durable. They'll keep your speakers stable and secure. Premium and clean steel construction looks great, and optimizes the performance of your speaker by minimizing floor distortion. The column can even be loaded with sand to reduce resonance and increase stability.

The bottom of the stand comes with spikes and rubber pads for carpet and hardwood floor mounting. The heavy-duty design provides 22 lbs load capacity. The large tempered glass plate (8 x 8 inch) is large to accommodate a large number of speaker models. With a total height of 23 inches, these stands will allow you to place the speakers at optimal seating height for music and home theater applications.

Distinct design and performance at a great value. Join thousands of happy Mount-It! customers and benefit from our decade-long experience in home theater accessories and superb customer support.

• HEIGHT ADJUSTABLE - Ergonomic mobile stand up desk computer workstation is height adjustable from sitting to standing.
• STAND-UP PORTABLE DESK - Ideal for use as a stand-up portable computer office desk and can also be used as a speaker's podium.
• AMPLE ROOM - Rolling computer cart has 4 platforms to store monitor, laptop, keyboard, printer, CPU, PC tower and speakers. The height of top two shelves are optimized for ergonomic laptop/keyboard and monitor placement.
• HEAVY-DUTY - Standing computer cart has a weight capacity of 132 lbs, with about 33 lbs capacity for each shelf. The top two platforms are height adjustable up to 17 inches with 11 locking intervals.
• PORTABLE - Moving the desk from room to room is easy with the 1.5 inch furniture casters, and the desk locks into place with two locking brakes.

User questions & answers

Question:	Is the keyboard tray height adjustable? Or is it fixed relative to the top (monitor) tray? What is the max height of the keyboard tray
Answer:	Absolutely. Please email me at [email protected]. We'll be happy to send another.
Question:	During assembly, can the top tray be mounted over the next lower tray, instead of being forward of the lower tray
Answer:	Hello. Unfortunately it's not going to fit a 12 oz bottle that doesn't have a vertical wall. There are some odd shaped bottles such as Modelo that won't fit correctly.
Question:	Can you give me the dimensions of each table top
Answer:	Hi Lakisha, yes it will fit on top of the screw top but it won't have a snug fit like it should on a capped bottle from a water supplier bottle. It'll just sit on top & if you hit or bump into the bottle hard enough it might get knocked off. I tested it on a screw top that I had to make sure it would work & it does, it's just not a snug fit if you're ok with that.
Question:	How flimsy is this desk? Is it ok to put a 1500.00 laptop on it
Answer:	No. It will turn off every 90 seconds.

Product features

Mount-It! Mobile Standing Desk

Raise and lower your work surface quickly and effortlessly, so you can work better. Its ergonomic, mobile, space saving attributes make it an attractive choice in all types of businesses, offices, trade shows, mall kiosks, retail stores, factories, schools, hospitals, and even at home.

All necessary hardware and installation instructions are provided for assembly.

Height Adjustable

No tools needed - locking rotary knobs make height adjustment easy. The height of the top two platforms can be adjusted from a minimum of 37.25 inches to a maximum top shelf height of 53.75 inches. 16.5 inches of height adjustment allows you to find a comfortable sitting and standing position throughout the day.

Utility Shelf

Middle shelf conveniently holds books, papers, and other necessities, so you can keep your desktop organized.

CPU/Utility Shelf

Lower shelf is deep enough to hold a computer tower or printer that weighs less than 33 pounds for a fully mobile workstation setup.

Caster Wheels

Easy-roll casters move in every direction, allowing it to be conveniently relocated from room to room. The locking casters allow the cart to be stationary when desired.

• VERSATILE WORKSTATION - Use this stand as a mobile stand-up computer desk, lectern, podium or a presentation cart to stage your laptop and projector. Tilting desktop allows multiple angle adjustments.
• HEIGHT ADJUSTABLE - This ergonomic mobile stand up desk is height adjustable from 40.5 inches to 49.1 inches. Transition from sitting to standing position by adjusting the rotary knobs and manually lifting the top platform.
• AMPLE ROOM - Rolling presentation cart has a wide top platform to store a laptop, projector or other presentation materials. Secondary platform can be used for storing office and presentation essentials.
• PORTABLE - Moving the desk from room to room is easy with the 1.5 inch furniture casters, and the desk locks into place with two locking brakes.
• HEAVY-DUTY - Presentation cart has a weight capacity of 88 lbs. Made from sturdy steel frame and E1 grade particle board.

User questions & answers

Question:	The listing says what the minimum and maximum heights are for the top shelf, but what are the minimum and maximum heights of the second shelf
Answer:	I don't have the Sky Kennel but I attach it to the outside of my crate. As long as the nozzle can fit through the gaps in the wire, it should work.
Question:	Is the metal lip uncomfortable when typing on a laptop? Is there enough room for a mouse
Answer:	As long as it is the same width it will just not cover the top.
Question:	Is the second shelf removable? i’m interested in this unit but do not want the smaller, second shelf
Answer:	No it’s made of BPA free pvc
Question:	How easy is it to pack up? Do the shelves fold down so they can easily be transported
Answer:	The cover is removable, you can use the bottle without this cover but then you should use a towel or something else.

Product features

Mount-It! Mobile Stand Up Desk, Portable Podium and Presentation Lectern Height-Adjustable Multi-Purpose Standing Workstation,Black.

Mount-It! mobile stand-up desk, presentation podium offers versatile uses in your office or business. It is ideal for use as a speaker’s podium and can also be used as a rolling stand-up desk, workstation.

Height adjustment feature allows easy transition from sitting to standing and promotes the most ergonomic, comfortable working posture. The frame is made with sturdy steel materials and features built in height adjustment with 11 different locking intervals (minimum height: 40.5", maximum height: 48.5"). The desk has 2-tiered shelf system allowing for large space requirement. The top shelf measures 23.6 inch wide and 15.8 inch deep, large enough for most laptops and a mouse pad for regular office use.

Tilting angle of the top platform can be adjusted from a flat 90 degree to 40 degrees down for your customized comfort. Metal lip at the bottom of the platform keeps your documents neat and organized.

We used high-strength steel profile and engineered particle board for optimum strength and lightweight use. The sturdy base keeps the lectern steady, mobile and prevents rollover. 88 lbs of carrying capacity is strong enough for regular use.

Premium 2” furniture casters at the bottom can swivel 360 degrees and allow this rolling desk to be moved easily from location to location. Ideal for doctor’s offices with multiple patient rooms, or moving it between meeting rooms in the office. The casters can be locked.

The package include easy to follow instructions. The podium can be assembled in a few minutes.

• THEFT-DETERRENT TABLET STAND - Secure tablet enclosure mount with ultra-thin frame. Minimalist design allows for the tablet to be secured while still being eye-catching and welcoming to users.
• UNIVERSAL TABLET KIOSK - Upgrade your tablet, leave the kiosk; universal tablet mount cradle fits iPad, iPad Pro ,Galaxy Tab, Surface Pro & other 9.7 to 13 inch tablets
• TABLET FLOOR STAND - Height adjustable tablet floor stand with tilting iPad mount and screen rotation for any user and with any app. Perfect for retail, exhibits, trade shows, lobbies and more
• RETAIL TABLET KIOSK - POS inspired design tablet kiosk with minimal locking enclosure. Restricted access to buttons and ports make discourage unwanted pressing. Cable management floor stand to keep all wires organized
• FREE STANDING FLOOR STAND - Portable tablet floor stand with wide base for any surface material; For added security and stability bolt down the wide base

User questions & answers

Question:	Does this work with the 8th gen Ipad
Answer:	Yes it's very stable.
Question:	What is the material of the stand? - IE Aluminum and plastic
Answer:	Thanks for your order, the replacement clamp for 12.9inch ipad is in Amazon Warehouse now, They will handle it and sold again, Please just waiting few days and check our shop,
Question:	Will an iPad mini fit? It says 7.9” tablet, and then 9.7”. Which is it
Answer:	Compatible with most popular tablets and phones within 3.5-10.6 inches.(NOT for iPad Pro 12.9 ).
Question:	Dose this work with an Amazon fire 10 inch tablet 7th gen
Answer:	I'm sure exactly the setup you asking about because idk your actual bed set up. However, it has a good range of positions, both height and distance from you. However, to take advantage of them, you'll need to slide the base some, which is not hard but does take a little effort (not something I'd say could be done laying in bed).
Question:	Is it stable enough when touching the screen
Answer:	The gooseneck can be bent to any position (almost) that you want. This is a really great product. Well made. Great instructions. I use it everyday.
Question:	For manufacturer. i just upgraded and purchased a new ipad pro 12.9which doesn’t fit. can i buy a new mounting head for the existing stand
Answer:	You have a 1 year warranty. Should you encounter any problems with the product feel free to contact us.
Question:	What is the maximum clearance between the holding brackets
Answer:	I use it for iPad, works fine as long as you’re not bending it to far over. It will tilt over.
Question:	Is it ajustable for a good view from a mattress directly on the floor? I mean with my head on the pillow, it´s pretty clost to the floor actually
Answer:	Yes it does stay in position. If your sitting in a chair and have facing you it works great. If you bend it to far to one side it can tilt over. The base is heavy enough just not wide enough. I use it everyday.

Product features

Mount-It! Universal Tablet Floor Kiosk

Stand out and increase engagement with this freestanding universal tablet kiosk that allows you to interact with your customers, visitors, or clientèle in a fun, modern way. The minimalist locking tablet enclosure will speed up the checkout process, increase shopper engagement, loyalty sign-ups, and guest registration. The security frame ensures your tablet is safe when on display and protected from theft. The wide base can be used freestanding or bolted to the floor for added security.

Adjustable Height

Suitable for many environments. Adjust the height of the pole up to 46.25 inches.

Easy Interaction

Easily tilt the screen up and down, and rotate between portrait and landscape orientation for efficient and quick interaction.

Cable Management

Route your tablet's cable through the pole to keep it charged while on display.

• HEIGHT ADJUSTABLE - Ergonomic mobile stand up desk computer workstation is height adjustable from sitting to standing. The desk also comes with a premium monitor mounting arm to raise your computer screen. Easy to assemble.
• STAND-UP PORTABLE DESK - Ideal for use as a stand-up portable computer office desk and can also be used as a speaker's podium.
• AMPLE ROOM - Rolling computer cart has 4 platforms to store monitor, laptop, keyboard, printer, CPU, PC tower and speakers. The height of top two shelves are optimized for ergonomic laptop/keyboard and monitor placement.
• HEAVY-DUTY - Standing computer cart has a weight capacity of 132 lbs, with about 33 lbs capacity for each shelf. The top two platforms are height adjustable up to 17 inches with 11 locking intervals.
• PORTABLE - Moving the desk from room to room is easy with the 1.5 inch furniture casters, and the desk locks into place with two locking brakes.

User questions & answers

Question:	dose the mount work with the new i mac
Answer:	The two straps have two hooks on each to hold it to the crate. The dog went right to it. Using it just fine. It drips water only when your adding water to the containiner
Question:	What is the largest monitor size this cart can handle
Answer:	This can be mounted on the Iris dog pen, but it takes some jerry-rigging. I used two small hair bands on each clip to loop over the thick, plastic grates of the pen. Since doing that 3 months ago, it has securely held the water bottle against the pen.
Question:	Does it have cord management
Answer:	Yes indeed. It comes with a spring and clips on each end for attaching to any basic dog crate. My pup uses hers and loves it!
Question:	How easy is to adjust the desk's height
Answer:	Yes the ball is stainless steel and it works wonderful i have one of these bottle and i love it.

Product features

Mount-It! Mobile Stand Up Desk / Height Adjustable Computer Work Station Rolling Presentation Cart With Monitor Arm

Mount-It! introduces the perfect height adjustable mobile stand-up desk. It is an ergonomic sit stand computer desk that allows you to raise and lower your work surface quickly and effortlessly to healthy sit-stand heights so you can work with more comfort. This portable desk also comes with a premium monitor riser/arm to raise the height of your computer monitor.



Ideal for use as a mobile computer/laptop station for at the office, home, showroom, and>


High quality steel frame with powder coating ensures durability and reliability. The height of the top two platforms can be adjusted from a maximum top shelf height of 54 inches to a minimum of 37 inches. 17 inches of height adjustment allows to for from a sitting position to a comfortable standing position.



The locking casters allow the cart to be stationary or mobile when desired. Due to its size, maneuverability is excellent with total side width of 28” and a depth of 27.5”.



Its ergonomic, portable, space saving attributes make it an attractive choice in all types of businesses, office, trade-shows, mall kiosks, retail stores, factories, schools, hospital even at home.



All necessary hardware and installation instructions are provided for assembly.

Product description

Monitor Desk Mount,Computer Monitor Stand

• DUAL ARM MONITOR MOUNT: Fits 2 screens 19 20 21 22 23 24 25 26 27 28 29 30 31 32 inches, with a maximum support weight of 20 pounds each, using the 75x75mm or 100x100mm VESA square bolt hole pattern found on the back of the monitors. Comes with interchangeable C-clamp or grommet base mount for use on desktops.
• FEATURES: Two monitor stand has counterbalanced, gas spring arms which make adjustments effortless. It has 2 quick-detachable VESA plates for easy mounting and removal of monitors. Comes with integrated cable management and is made out of heavy duty steel and aluminum alloy. Key Product Features
• FULLY ADJUSTABLE: Dual monitor arms can tilt up and down 90 degrees, swivel left/right 180 degrees at two joins and a full 360 at another, and raise/lower a total of 13 inches. Both monitors can be rotated into portrait or landscape orientations with easy and will stay in place.
• EASY INSTALLATION: Dual monitor mount comes with all mounting hardware, tools, and instructions necessary for assembly. Turn hex bolt on top of gas spring arms to set the counterbalance and hold screens in place. See instructional video for additional tips on functionality and assembly.
• US-BASED CUSTOMER SUPPORT: Dual monitor stand comes with a 5-YEAR WARRANTY and our friendly and responsive customer support team is available to answer any questions you may have during normal business hours.

User questions & answers

Question:	Does it support the samsung sf351 series 32-inch
Answer:	Yup. That's how I hang em. Outside with th3 nozzle between the wires
Question:	The description states it hold up to 32" monitor. the diagrams show up to 30". what is it? i have 2 32" flat monitors. do you guarentee it will wo
Answer:	I put mine in the dishwasher...upper rack. It’s been ok
Question:	Does this hold up to 20 lbs per arm or total
Answer:	It will hang inside or outside the crate
Question:	Will I be able to install a 34 inch 21:9 monitor and a 27 inch 16:9 monitor, or would they be too large
Answer:	It doesn't, just prevent things from pressing the metal ball.

Product features

Landscape and Portrait Orientations

Your monitors will be mounted on a bracket that can rotate a full 360 degrees. Turn your screens landscape to portrait so you can read long graphs, articles, or spreadsheets with ease.

Height Adjustable Arm

Gas-spring technology provides smooth height adjustability. Raise or lower your monitors to the perfect height with a soft touch.

Tilt

Tilt up or down 90 degrees for a more ergonomic workstation, reducing screen glare, and increasing your screen quality.

• VERSATILE WORKSTATION: Equipped with two adjustable trays, enjoy the versatility of mounting more than one projector, laptop or any combination of equipment and devices, saving you time and space.
• TALL ADJUSTABLE PROJECTOR STAND: Easily adjust the height up to 57.5" with the top tray able to conveniently tilt up to 30° in both directions and the bottom tray able to adjust in height.
• EASY PORTABILITY: The light-weight and portable design make rolling and maneuvering this mobile projector stand a breeze. 4 smooth-gliding omnidirectional casters allow you to adjust your station, with 2 locks built-in, ready to secure your set up in place.
• HEAVY-DUTY DURABLE: The solid steel frame of this projector stand, its wide base, and metal lips were all engineered to withstand heavy use and rugged travel. This projector stand can hold up to 88 lbs of weight.
• MAXIMIZED AIRFLOW COOLING: Keep your media devices running cool even during the longest presentations. Our intuitive airflow cooling vents are designed to disperse heat outwards, cooling your projector and preventing any risk of overheating.

User questions & answers

Question:	What is the height of the raised edge of the space that holds the laptop on the top shelf
Answer:	It's adjustable however mine broke within a few weeks. :-(
Question:	Can this item top tray tilt side to side
Answer:	The top tray only tilts on one axis. I would call in front and back. The bottom tray does not tilt.
Question:	What is size of each trays
Answer:	14x22
Question:	is just the bottom tray available for sale
Answer:	The stand is sold as seen in the photo. I love it. My projector is on top and my laptop is on the bottom

Product features

Mount-It! Mobile Projector Stand

This portable projector stand offers an easy and simple way to set up your audiovisual presentation equipment. Its tilting upper tray, height adjustment, and mobility give you the freedom to adjust it to your preferences for your next presentation. The steel frame is designed for durability and features two platforms set at different heights for your laptop and projector.

Height Adjustable

Easily adjust the height with the turn of two knobs. 11 preset heights range from 36.25 inches to maximum 57.5 inches.

Tilting Tray

Turn the knob to tilt the top tray up to 30 degrees in either direction to point your projector toward the ideal location on a screen or wall.

Locking Wheels

Wide sturdy base features rolling casters for easy movement from location to location. Wheels can be locked for stationary use.

• UNIVERSAL FIT: This flat screen tv floor stand is compatible with most 13 to 42 inch televisions. It also supports VESA mounting up to 200 x 200. We've built this HD tv floor stand for maximum compatibility, giving you confidence that any tv in your home will fit.
• ADJUSTABLE HEIGHT: For when you need to find the perfect height and viewing angle in your home, during a tradeshow, or outdoors, this adjustable steel monitor stand can reach up to 52 inches in height using the built-in telescopic pin lock feature, and can tilt 30 degrees downward from the TV bracket.
• EASY INSTALLATION: Everything you need to get your tv, monitor, or screen mounted on this flat screen floor stand is in the box, and takes less than 10 minutes to put together.
• HEAVY-DUTY FRAME: Able to support up to 44 lbs, this floor base tv stand is built using high-grade cold-rolled steel. That means your television screens, panels, or monitors are safe and secure, no matter how long they're mounted for.
• SECURE STABLE BASE: Once your flat screen tv is mounted on this metal floor tv stand, the 18” x 20” wide solid steel base will keep it straight, stable, and wobble-free. Whether your screen is front and center or off to the corner, this tv floor stand features adjustable feet to level the frame so your panel isn't affected by uneven floors.

User questions & answers

Question:	How easy is it to adjust the height? Are tools required to do so
Answer:	Pretty easy but you do need a screwdriver. But the screen tilts so you don't really need to adjust the height. At least I haven't at all since I've been using it and I initially thought that'd be a problem.
Question:	I see that it tilts up and down but does it rotate
Answer:	No. The stand does not rotate.
Question:	Does the floor stand come with the hardware needed to mount tv to floor stand
Answer:	Yes, hardware to mount the tv is provided.
Question:	Can it be taken apart for transporting without removing the tv from the brackets
Answer:	Yes. Take the bolts out that are used to select the height of the TV and there you go. It will have the stem that fits into the upright still attached and might be a bit awkward if you are trying to pack. But you do not have to remove the TV from the bracket. Hope this helps.

Product features

Mount-It! Portable Floor TV Stand

Avoid drilling holes in your wall and place your TV in any space with this floor standing TV mount. The lightweight but sturdy construction makes it ideal for indoor or outdoor use. Telescoping height offers multiple height options for a custom setup. The adjustable tilt function helps reduce glare, and adjustable feet supports the stand on uneven floors. Great for restaurants, trade shows, malls, restaurants, hotels, bars, and cafes!

Telescoping Height Adjustment

Telescoping design offers 19.3 inches of preset height options, so you can find the height that works for you.

Adjustable Tilt

30 degree upward tilt helps reduce glare for the clearest viewing angle.

VESA Plate Extensions

Attach the extension plates to the mounting bracket to fit TVs with VESA bolt hole patterns 75x75mm up to 200x200mm.

Height Adjustable

This mount can be adjusted from 29.5 inches to a maximum 48.8 inches from the floor for a total adjustment range of 19.3 inches.

• MANUAL SIT STAND DESK - This innovative adjustable height stand up desk promotes better posture, reduced back and neck pain, a thinner waist line and increased productivity. You do not need to spend a fortune to be healthier while you work with this affordable standing desk.
• CRANK HEIGHT ADJUSTMENT - Easy to use crank system adjusts the height of the desk between sitting and standing positions. Compared to motor systems, crank system provides affordability and maintenance free use.
• HEAVY-DUTY FRAME - Steel components and sturdy leg support and cross bracing provide a solid frame that is capable of carrying 132 lbs.
• TELESCOPING LEGS AND ADJUSTABLE WIDTH - 2-segment telescoping legs adjust the height of the desk from 30 inches min to 48 inches max. The width of the desk can also be adjusted between 44 inches min to 64 inches wide to support various tabletop sizes.
• TABLE TOP SIZING - Table top is not included. Select your favorite tablet top material and color and easily install on this standing desk frame. Recommended table top size range of 45 to 86 inch wide and 27 to 40 inch deep and 1" or greater thick.

User questions & answers

Question:	Can you install the crank handle on either side
Answer:	No, only the bottom opens. You have to take it off of the kennel to refill it
Question:	I'm not longer about to raise the desk; the crank turns and makes a grinding sound without the desk moving. How do I get this fixed
Answer:	I'm sure it could. I could never get my dog to get the hang of it.
Question:	Regarding the crank and when a desktop is mounted, does the desktop get in the way of the handle? Or can the handle come out then rotate
Answer:	Use room temp water.
Question:	Is it possible to add caster wheels to the base
Answer:	Small cubes or crushed ice would fit.

Product features

Mount-It! Stand Up Desk with Manual Crank, Frame Only, Height Adjustable Sit-Stand, Standing Ergonomic, Black

Mount-It! ergonomic manual height adjustable desk is perfect for office, schools, home, and most working environments. Manual lift, easy to operate hand crank desk will let you adjust your desk height giving you flexibility to easily adjust to a sit or stand position in less than sixty seconds. Increase your focus, burn calories, and counteract the health effects of a sedentary life throughout your workday. The durable steel frame provides a long lasting unit that is sure to withstand heavy and repeated use. Use this height changing desk as a long lasting investment for both your employees and your business.

Product Features:

- Reduce stress or pain of back and neck, increase physical activities and keep your health to increase productivity

- Combine this desk with other Mount-It! monitor desk mounts, anti-fatigue floor mats, under-desk CPU mounts and footrest.

- 2-Stage telescoping legs

- Removable crank handle

- Effortless height adjustment via geared crank mechanism

- Cross bar and adjustable feet pad offer extra stability

- Reinforced steel footings for extra stability

- Easy assembly

- Includes all hardware and tools required and clear instructions for assembly

Product Specifications:

- Material: Steel and Plastic

- Height Adjustment Range: 30 inches to 48 inches

- Frame Width Range: 44 inches to 64 inches

- Weight Capacity: 132 lbs

- Recommended table top size range of 43 to 86 inch wide and 27 to 40 inch deep and 1” or greater thick.