13 best accessory power car ramps

Product description

Aluminum Cargo Carrier with Ramp Model # 432 ACCTG. Made in the USA *This listing is for the carrier only. The cost DOES NOT include the snowblower.* This well built high quality carrier is ideal for transporting heavy equipment. You now have the ability to easily transport equipment or electric wheelchairs/scooters with a Sport Utility Vehicle, or any other vehicle that has a class 3 or class 4 trailer hitch. What an extremely safe operation when loading onto this low to the ground carrier, as opposed to loading equipment into a high pick-up truck bed, or trying to wrestle the equipment into the back of a SUV (if there is room). With the built-in ramp the operation is fairly simple. The ramp is bolted on and lays in the carrier when not in use. When needed lift the lightweight ramp and deploy it to the ground as it pivots on two bolts. After loading the equipment raise the ramp to an upright position and then hold it in place with a provided hitch pin and already installed bracket. This durable aluminum cargo carrier will not rust or ever need painting. Please note: anything that goes into a receiver hitch will have a little play. What you can do to eliminate the play is to tie down the equipment to the bumper on the inside (side closest to vehicle), and directly to the outside of the carrier at the opposite side (side furthest from the vehicle). This cargo carrier comes fully assembled except the 2" square tube needs to be attached (It is detached to drastically reduce shipping charges).

• In Stock with a delivery time of 1 to 5 days. The 48" long x 32" wide carrier has a 2" x 3" x 3/16" thick angle frame. The carrier's expanded metal floor is reinforced with four - 1" x 1" square tubing. The ramp is surfaced with anti-slip expanded metal and reinforced with seven 1" wide x 1-1/2" deep tubing. A wear plate is welded to the bottom of the ramp providing additional reinforcement. This listing is for the carrier only and DOES NOT include the snowblower.
• This well built high quality carrier is ideal for transporting heavy equipment. You now have the ability to easily transport equipment or electric wheelchairs/scooters with a Sport Utility Vehicle, or any other vehicle that has a class 3 or class 4 trailer hitch. What an extremely safe operation when loading onto this low to the ground carrier, as opposed to loading equipment into a high pick-up truck bed, or trying to wrestle the equipment into the back of a SUV (if there is room).
• With the built-in ramp the operation is fairly simple. The ramp is bolted on and lays in the carrier when not in use. When needed lift the lightweight ramp and deploy it to the ground as it pivots on two bolts. After loading the equipment raise the ramp to an upright position and then hold it in place with a provided hitch pin and already installed bracket.
• The 2" square receiver tube (used for attaching to the vehicle) needs to be attached to the carrier and sticks out approx. 6" from the frame and is received by a class 3 or class 4 trailer hitch. Bolting the tube allows for easy replacement if ever needed. You also have the flexibility to attach the tube in either direction thus allowing the ramp to be deployed from the driver or passenger side.
• Made in the USA - Lightweight all aluminum construction with a 300 lb. weight capacity (conservative). The carrier will never rust or need painting. This listing is for the carrier only and DOES NOT include the snowblower.

User questions & answers

Question:	will this work for a 2008 jeep wrangler? I mean with the spare tire sticking out? has anyone used for this? I need to use for a snowblower this winter
Answer:	I believe its glass mirror
Question:	does this carrier come with a warranty
Answer:	The front you could, if right in front of your face, but I wouldn't. Your wipers would be better. The back window is too far away. They are small.
Question:	Has anyone had experience using this on a smaller vehicle? Midsize Toyota Camry or corolla
Answer:	Yes, they work with the heated side mirrors.
Question:	I want to use this for carrying a snowblower and with my weight plus the blowers I will exceed the 300lb buy about 150lb
Answer:	No, it doesn't.

• 🚐【3500lbs Power Tongue Jack】: Heavy duty electric trailer jack A-frame built in a low maintenance 12V DC electric gear motor to lift 3500lbs trailer stably.
• 🚐【 Adjustable Height】: Adjustable 5 gear drop leg make electric trailer jack increase 8" height to meet the different lifting needs. Max extended height is 22” lift, fully retracted in 9".
• 🚐【Saving Time & Energy 】: Just push the button of the electric rv jack will raise or lower any A-frame trailer automatically more quicker but without harsh sound & easier than hand cranking. No longer annoyed by sore arms and shoulders.
• 🚐【Safe Operation】: Electric trailer jack with 2 LED lights for easy and safety night time hookup. And built-in circuit breaker, if in accident, it will disconnect automatically & reconnect about 2 mins later.
• 🚐【Wide Applicantion】: Electric tongue jack made of heavy-duty steel with anti-rust coating on the outside, a hand crank & Weatherproof Jack Cover good for rv, 5th wheels, any A-frame trailer and camper.

User questions & answers

Question:	Does this power tongue jack come with a fuse? Or do I have to buy it extra
Answer:	No, we do not make custom size fenders.
Question:	What is the size of the electric jack cover
Answer:	$50 for one fender
Question:	Where does this jack get its power
Answer:	I’m not sure about an Acura. It fits my Toyota Tacoma.
Question:	Could this Electric Trailer Jack work for my 24" trailer in 6,000 lbs weight
Answer:	Mirror rain visors. To be honest they are for your car to look nice. You can buy any kind. And only going to covered 20 to 35 % I buy one pair. And pay 28$ and still covered the same %.
Question:	Is the hitch the only thing holding all the weight
Answer:	Around 1/8 inch.
Question:	Is the slope of the ramp low enough for an electric WC to climbe
Answer:	it will really fit just about anything. it is very good quality, but it does not go wide enough for me. at the same time it is not physically as large, so it fits well between the visors. some of these mirrors are very wide, making it difficult to work the sun visors. we are using it on a vw eos, and it does provide a bit wider view, so we like it. i have a much larger and wider one on a pick up truck. hope that helps.
Question:	Does this interfere with the back up camera when empty
Answer:	Nope
Question:	I wanted quicker delivery but could not find that option
Answer:	Yes

Product features

3500lbs RV Electric jacks help you lift/lower trailer easily!

• Positive/Negative:Black Wire(+) /Power Tongue Jack(-)
• Retracted: 9"
• Extended: 22"
• Stroke Travel Lifting:14"
• Drop leg: 8" (5-gear, adjustable & removable )
• Outer tube dia.: 2-1/4"
• Inner tube dia.: 2"
• Foot Plate Size: 5.5"
• Operation Volt: 12V
• Power Cord Length: 55"

Saving you time and energy:

• Just simple push of a button to raise and lower your A-frame trailer automatically but without any harsh sound.
• Mounting hardware, pins and manual crank handle included help you install the electric tongue jack 3500lbs in fast and simple way.

Heavy duty Power Tongue Jack Weatherproof

• Featured with slim design to save space, stroking faster, powerful but quiet.
• Designed with rain resistant buttons, and with a free weatherproof electric tongue jack cover cover, the stainless steel screws/bolts outside motor cover will never rust.
• Black powder coated outer tube. Zinc-finished inner tube and footplate resist corrosion.
• 5.5" diameter foot plate gives you more stable support. Rain water drain holes on foot plate. One-piece motor cover prevent rain damage.

Emergency Detachable Crank Handle

Emergency Crank handle allows you to manually operate jack when battery is drained.

Dual LED lights

Bright LED light designed for night operation increase brightness and point directly for lifting or lowering the trailer.

Product description

From the manufacturer GOOACC is a famous brand that dedicated to providing innovative, cost-effective and quality products. We have been specialized in automotive products and parts for many years. Constant improvement and innovation is our eternal aim. Hope you can purchase with satisfaction here. Specification: Universal fastener clips and remover 4 Whole sizes from 6.3 Mm (1/4"), 8mm (5/16”), 9mm (23/64”), 10mm (25/64”). 6 different Push pin rivet for many brand vehicles. Material: Made of durable nylon. Suitable for car use better replacement for original bumper and fender clips. Push in type, easy to fasten bumper fender flare and mud flap. Rivet post pressure expands legs for fast and tight fastening. Features Tough Fastener Removal Tool Allow you to quickly and easily remove car door panel and upholstery clips without causing damage to them. Multiple Application Locations A must have for any four wheeler owner to keep those fenders and splash guards attached and intact. Removable and Reusable Holds securely but is easily removed without damaging it for reuse. Just pop the post out with a fastener remover. Size: 120Pcs Car Retainer Clips plus Fastener Remover Specification: material: black nylon, suitable for car Use better replacement for original old worn broken one. Push type, easy to fasten.

• 4 Hole sizes from 6.3Mm(1/4"), 8mm(5/16" ), 9mm(23/64" ), 10mm(25/64" ).
• 6 different Push pin rivet for many brand vehicles.
• Great material - these bumper clips are made of high-quality Black nylon Material, anti-wear and anti-corrosion, would not break or crack easily during use.
• Widely application - these Push clips are widely used for trim panel clips, door trim clips, door Panel clips, bumper clips, fender clips, engine cover and splash shield retainers replacement. It always covers some applications include telecom equipment, motor vehicles, domestic appliances, furniture and electrical equipment.
• PACKAGE INCLUDED:120PCS 6.3mm 8mm 9mm 10mm Bumper Push Rivet Clips,1PC Fastener Remover

User questions & answers

Question:	Will these fit my 2011 altima base model rear bumper
Answer:	The fan is probably able to fit a large number of different models due to a similar mother board layout, but I do not know 100% for sure - I searched for compatible fans and bought one. The issue is with the pin connector. Open up the computer and look at your connector (is it a 3 pin or 4 pin) as that is likely to be the bigger issue.
Question:	Would any of these fit a cadiliac 2006 dts the bunker and back third brake light
Answer:	5 cm
Question:	Can I Use these clips on a 2001 jeep grand Cherokee
Answer:	Yes, I installed in an HP 360 convertible with no issues.
Question:	Can these screws fix the 2007 nissian murano and a 2008 chrysler town and country
Answer:	No extra parts needed. It comes with dielectric gel for reattaching the cpu and replacement tape for the heat sink. Uses the existing screws so keep those from the old fan.

Product features

Specification:

4 Hole sizes from 6.3Mm(1/4"), 8mm(5/16" ), 9mm(23/64" ), 10mm(25/64" ).

6 different Push pin rivet for many brand vehicles.

Material: Made of durable nylon.

suitable for car use better replacement for original bumper and fender clips.

Push in type, easy to fasten bumper fender flare and mud flap. Rivet post pressure expands legs for fast and tight fastening.

Tough Fastener Removal Tool

Allow you to quickly and easily remove car door panel and upholstery clips without causing damage to them.

Multiple Application Locations

A must have for any four wheeler owner to keep those fenders and splash guards attached and intact.

Removable and Reusable

Holds securely but is easily removed without damaging it for reuse. Just pop the post out with a fastener remover.

Product description

Overview:

This rubber ramp is durable and practical. It can be placed on the threshold or sidewalk to eliminate the obstacle of the step height difference, suitable for wheelchair, scooter, motorcycle and car, has good shock absorption effect, crush resistance and low noise.



Features:

The rubber ramp is robust, abrasion resistant and long lasting.

Designed with reasonable height, suitable for wheelchair, scooter, motorcycle and car.

Effectively protect the curb and ensure car safety.

It has good impact absorption effect, crush resistance and low noise.

A simple way to eliminate the inconvenience of the threshold, more convenient for the disabled.



Specifications:

Condition: 100% new

Material: rubber

Color: black

Dimensions: approx. 48.7 x 24 x 10cm/19.17 x 9.45 x 3.94inch

Weight: approx. 12000 g



Package List:

2 x rubber ramps



Note:

1. Please allow 0-2cm error due to manual measurement. Thank you for your understanding.

2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

• 【High Quality Rubber Material】 The rubber ramp is sturdy, abrasion resistant and long lasting. made from 100% recycled rubber.
• 【Protect car safety】 Designed with reasonable height, suitable for wheelchair, scooter, motorcycle and car. Effectively protect the curb and ensure car safety.
• 【Good shock absorption effect】 Has good shock absorption effect, crush resistance and low noise.A simple way to eliminate the inconvenience of the threshold, more convenient for the disabled.
• 【Wide Range of Uses】 This rubber ramp is resistant and practical. Ideal for vehicle access at playgrounds, hospitals and public or private car parks or car parks and crossings at schools.
• 【Good Service】 We strive to provide you with the highest quality product and best customer experience, if you are not completely satisfied, please feel free to contact us at any time, all emails will be answered within 24 hours.

Product description

Race head-to-head with this high-speed, battery powered 1:43 scale slot car racing set featuring your favorite American Muscle cars! New Carrera battery technology now gives you the ability to race with the same power and speed as the electric powered Carrera GO!!! slot car sets! Hitting scaled speeds of up to 370-mph is no problem for the Ford Mustang and Chevrolet Camaro Sheriff as they speed around this 14.10-ft. Long Track. A 2-piece removable jump ramp is also included for even more challenge and excitement as you sharpen your slot car racing skills! Rated for ages 5 and up, kids and adults alike will get countless hours of fast racing fun! This battery operated 1:43 scale Carrera slot car racing system is compatible with all Carrera GO!!! cars and track accessories allowing you to customize and expand up to 32.8-ft. for even more racing fun. Cars included: Blue Ford Mustang and Chevrolet Camaro Sheriff Battery operated: (req. 4 Type D batteries - not included) Track length: 14.10-Ft.track/car scale: 1:43 Recommended for ages 5 and up Removable jump ramp Assembled size: 4.82-ft. X 3.94-ft. Includes: 2 speed controllers, 2 1:43 scale cars, straights, curves, supports, jump ramp, and guardrails

• Fast-paced car racing action on 14.10-ft of track with realistic cars that reach scale speeds of 370-mph
• Carrera battery technology gives you the same speed and power as electric sets to provide thrilling racing action in every race
• Two-player racing that family and friends both young and old will enjoy
• Includes a 2-piece removable jump ramp and is compatible with all Carrera GO!!! cars and accessories allowing you to customize and expand up to 32.8-ft.
• Complete slot car racing system includes cars, speed controllers, track layout as shown, guardrails, and jump ramp

User questions & answers

Question:	Will the tracks and car go with the electric Go Pixar cars track
Answer:	I also faced issues with batteries. I use 3 AAA Duracell batteries, but they hardly last for few hours. I turn car off, still it seems it sucks the battery. Overall its great but due to batteries issue, its not not so good.
Question:	The cars broke. Can I buy these 2 cars separately
Answer:	Yes! But DO NOT order from the "Magic Tracks Store!" Everything is "out of stock" and "customer service" is a joke. You can't even cancel an order! Magic Tracks track and cars are interchangeable with Twister Tracks, Neo Tracks, Super Snap Speedway, and Build-A-Road, so there are a LOT of cars and tracks available! There are some interesting accessory sets available too.I was in a hobby shop for twenty years and did many reviews of toy and hobby items for local newspapers and TV. All of these items are made in China and are aimed at the "throw away" toy market. At $19.95 for a one car set you get good play value, beyond that price it's up to you if this toy is worth it. Shop around!
Question:	Is this toy electronic
Answer:	Lol - in our box were a lot of really great track pieces ... and a totally useless car that did not work. We got another set where the car worked fine. We did not purchase through Amazon for these, unfortunately. The tracks are wonderful, but I've found dozens of other reviews saying the cars don't work at all, or stop working within hours or days. A friend yesterday recommended getting the Mindscope Neon Glow Twister Tracks cars to go with the Magic Trax (since they don't sell cars separately for Magic Trax). She said those cars work great on the Magic Trax.
Question:	Does it take any 1:42 car
Answer:	Yes most any flexibility tracks sold are compatible

Product features

Carrera GO!!! Racing System Battery Operated 1:43 Scale Slot Car Racing Set - Speed Trap

Race head-to-head with this battery powered slot car racing set featuring your favorite American Muscle Cars! Carrera battery technology allows you to race with the same power and speed as an electric Carrera GO!!! slot car set! Hitting scaled speeds of up to 370-mph is no problem for the Ford Mustang and Chevrolet Camaro Sheriff as they speed around this 14.10-ft. track. A two-piece removable jump ramp is also included for even more challenge and excitement as you sharpen your racing skills!

14.10-ft. Battery-Powered Race Track w/Removable Jump Ramp

The Carrera Racing System battery-operated slot car track will bring you hours of fun with friends and family members. Powered by 4 Type D batteries, this track provides the same amount of power as an electric racing set giving you fast racing action! Expandable up to 32.8-ft. with the purchase of additional track and accessories and even upgrade-able to electric with the purchase of an electrical adapter.

1:43 Scale Chevrolet Camaro Sheriff and Ford Mustang Slot Cars

Race against a friend with these two muscle cars or have the ultimate police chase with the Camaro trying to pull over the Mustang, flashing lights and all!

Two-Piece Removable Jump Ramp

Add even more fun and excitement to your race course with the two-piece removable jump ramp. Leave it on the track for added challenge but easily removable for the inexperienced racers.

2 Speed Controllers For Fast Head-To-Head Racing Action

Control your car's speed up to 370-mph but be sure to speed up for a jump or slow down around turns so you don't fly off the track or land in the ditch between the ramp.

Slot Car Racing

For years, slot car racing has brought the action and excitement of motorsports right into the comfort of your own home. Now you can get behind the wheel and take control as your car races around the track. Children and adults young and old can take part in this fast-paced hobby and go head-to-head for the checkered flag. The ready to race slot car set comes complete with everything you need right in the box so that you can quickly set up the track and start racing right away!

• [GET DONE IN A BLINK]Electric car jack takes as short as 1 min to reach Max. Height(lifting height ranges：6.1~17.7 inch) with Max. Loading weight as high as 11023 lbs capacity, using an electric impact wrench to remove the screws and quickly replace the tires.
• [ABSOLUTE SECURITY]Car jack 5 ton kit will automatically stop working after reaching the height limit. The self-locking deconstruction of the jack can prevent the car from falling suddenly and ensure the safety of the vehicle and the person. The jack head uses a non-slip design: a cross-shaped groove plus particles protruding from the surface to increase friction. The built-in circuit breaker in the jack protects your vehicle wiring from overload
• [BEST CHOICE FOR SEDAN & SUV]The electric jack kit's two-way power supply (battery clip with 12V DC power socket or car cigarette lighter) allows any adult to change and repair tires at any time on the garage/highway. Permanently lubricated DC motor can provide enough power. The built-in flash LED light can run at night without any other lighting tools. The jack is fully enclosed design, completely waterproof, no oil leakage, to ensure safety during use
• [MULTI-FUNCTION TOOL BOX]The red triangle warning sign outside the electro-hydraulic jack box can be used as a warning road sign when repairing on the highway. The Velcro outside the box prevents the toolbox from sliding inside the trunk of the car. The entire box parts are precisely inlaid, and the tools in the toolbox will not be misaligned in the event of severe violent misfortune, and it does not occupy the extra space of the trunk of the car, and can be placed under the car seat.
• [DRIVING NECESSITY]Car jack kit is an indispensable good helper for garages, farms, highways, and long-distance travel, and is very suitable for emergency roadside tire replacement. Say goodbye to tedious manual disassembly, any adult can easily change tires,no need to ask someone for help to change tires.

User questions & answers

Question:	Can this jack lift a gmc yukon xl
Answer:	I don't think you will have any problems. Lift capacity is 3000 pounds plus. Most trailers have tongue weights of less than half of that. So there should be plenty of capacity left over to lift the truck a bit on it's suspension. Unless of course you have a monster truck and trailer situation
Question:	How do I get jack to work switch up nothing happens
Answer:	The footplate is adjustable from a minimum of 14.5" to a maximum of 20" from the mounting flange. I removed the foot plate and use a fiberglass cone. Without the footplate the shaft will retract to 12" below the mounting flange.
Question:	The air compressor stop working, how i can fix it or exchange it
Answer:	Not sure what you are looking at - Mine came with all that was needed - It may be referring to the trailer hitch itself - Hope this helps
Question:	Does the jack lock, mechanically with a pin etc once it is up for safety ? What prevents it from failing
Answer:	I too had a triangle mount on mine as well, to answer you, yes it will line up. It worked perfect on my 2008 Jayco Jayflight

Product features

Electric Impact Wrench

Operation Voltage: 12V DC

Max. Current: 13A

Fuse: 15A

Rated Power: 80W

Max. Torque: 480 N.M

Lifting Range

6.1 - 17.7 inches (155mm-450mm)

Tire Inflator Pump

Max pressure: 150psi

Air Flow: 35L/min

Maximum Current: 10A

Air hose length: 0.65m (25.59 inch)

Power Line Length: 11.48 inch (3.5M)

• Rated Capacity: 1 Ton (2200 lbs) with lift range 6.1 inch to 17.3 inch
• 12 V cigarette lighter adapter with 11.4 ft cord will reach all areas of the SUV
• Easy to operate just by 2 switch, a vertical lift control switch and an LED light switch
• Roadside emergency jack with LED light
• Built-in safety device prevent jack from falling and keep current height even out of power

User questions & answers

Question:	Does this have clips for a 12 volt battery as well as the cigarette lighter plug-in
Answer:	From max height it only takes a few seconds to collapse, changed my 2 boat trainer tires in less than ten minutes with this and the help of the my power socket tool.
Question:	can this jack be used on its side to "push" heavy items
Answer:	no, but you could get a 12volt power source fairly easy to operate the jack.
Question:	How long (Max. time elapsed) does it take to fully raise the vehicle
Answer:	rain should have no effect on the jack, but you probably will get wet.
Question:	What is the thread size of the adjustable height screw, I need to replace it with one that has a narrower diameter head
Answer:	I perched one. And end up returning it 3x. The fourth one finally worked. But.... it's definitely not 3 tons max. More like 2 tons max.

Product features

Technical Details:

 

• 1 ton Electric hydraulic floor jack with LED light
• Cross groove saddle prevent slipping from vehicle
• Rotating threaded rod can be spin out up to 75mm, makes cross groove saddle closer to lifting point
• Small size for easy storage
• Unique design, a good gift for your friend

 

Note 1:

Stop the vehicle, put it in parking, and apply the brake firmly.

Please confirm that each function switch is off. Then plug the power plug into the car cigarette lighter.

Note 2:

Remove the safety valve screw with hex wrench and rotate it clockwise, please remove the car lift till it descends to its original position. Then tighten the safety valve tightly and tighten the dustproof plug.

Note 3:

In case of the power has been disconnected, self-locking power structure and safety unloading knob prevent jack from falling and will not come down immediately. When re-connecting the power, car jack will go on working in accordance with the instruction, or using the safety valve manually to fall.

Product description

Protect your power chair from dirt, debris and the elements during transportation with the Silver Spring power chair cover. Made from lightweight, durable, nylon This cover features four Slit openings for tie downs to keep the cover in place, even at highway speeds. This cover measures 44" L X 23" W x 38" H, and features a rubberized interior membrane coating to keep your chair dry in all wet or snowy weather. The cover has two 1" Wide, built-in tie down straps with plastic buckles to secure across the bottom of the carrier, holding the cover in place. Four additional nylon loops on each side give you the option to strap The cover down at additional points. Each corner opens with a 10-1/2" Velcro Slit so the cover may be secured over the carrier tie downs for a tighter fit; plastic buckles at the corners keep them closed. The Cover has two 1" Wide, built-in tie down straps with plastic buckles to secure across the bottom of the carrier, holding the cover in place. Four additional nylon loops on each side give you the option to strap The cover down at additional points.

• Designed for transporting power chairs
• Durable, lightweight nylon fabric protects from rain, sun and debris
• Rubberized membrane interior coating for superior protection
• 5 Corner slits with Velcro and buckles allow for tighter fit when using tie down straps
• Measures 44" L x 23" W x 38" H

User questions & answers

Question:	Will this for a jazzy select
Answer:	Not sure, ours was for Pronto power wheelchair,covered with room to spare.
Question:	I saw hooks on the corners on the slits. Does this actually not have the hooks or was mine missing something
Answer:	There are two belts with clips. Also there are clips at the corners that snap together and release by small levers that are squeezed. There are no hooks. It takes some practice to get the cover to attach stably.
Question:	Is there some leeway to fit a chair that is wider but not as long
Answer:	Yes there is. My husbands chair is huge, he is 6ft and a big guy, and this cover covered it plenty. Just make sure your straps are very tight while traveling and tuck them in, because ours on the first trip ended up ripping the cover and the straps got torn :(
Question:	Can this cover permobil f
Answer:	I don't know what a personal f3 is but I have plenty of extra cover left over after covering my medical scooter.

Product description

120 volt AC winches are perfect for indoor or fixed applications, with access to a power outlet. Potential uses includes: shop cranes, boat lifts, boat davits, light towers, ventilation systems, dumb waiters, opening and closing of large horizontal sliding doors.

All D-L StrongArm; electric winches are built for multipurpose hauling and pulling operations. They are not to be used as hoists for lifting, supporting, or transporting people, or for handling loads over areas where people could be present.

• 1200 pounds (dead weight) load capacity
• Factory installed remote control with 10 foot cord
• Includes 3/16 inch x 20 feet aircraft cable and hook, installed and ready to use
• 10 foot, 3-wire grounded power cord
• 3 minute run time requires 15 minute cool down

User questions & answers

Question:	Can it be ordered with 40’ of cable
Answer:	This is not available with 40' of cable. A similar model with 50' of cable is model SA7015AC.
Question:	Can the clutch be removed
Answer:	The clutch should not be removed.
Question:	Can yo upgrade to a 50 ft cable in this model
Answer:	Thanks for your question! If you need 50' of cable on a winch the size and weight capacity of a SA5015AC, you should purchase a SA7015AC- https://www.dutton-lainson.com/proddetail.php?prod=25727. SA7015ACs are identical to SA5015ACs except that it has 50' of cable installed on it (instead of the 25' installed on SA5015ACs) and a pulley block and hook installed on the cable to allow you to double-line the cable if desired. Watch the "What's the Difference Between StrongArm Electric Winch Models?" video on this product page for more information on this topic.
Question:	how many amps does the 110v 1200lbs unit draw when under full load
Answer:	Thanks for your question! All StrongArm AC electric winches, including this SA5015AC, draw 8 amps under full load.

• Power on the go - 1500 Watts continuous power, 3000 Watts peak power, the ML1500 modified sine wave inverter converts 24V DC to 120V AC power. Connect DC battery cables directly to your vehicles battery and you have power on the go.
• The ML1500-24 features Dual 3-prong 120 Volt AC outlets for powering multiple loads and a digital display to monitor battery voltage and power usage. Simply attach the inverter directly to a 24 Volt DC battery to power appliances, power tools and many other electronics from your truck, van, trailer or RV.
• Extremely advanced, microprocessor controlled inverter that runs cooler with a built-in cooling fan and more efficiently than other units in its class. It is housed in an anodized aluminum case with heat sink design providing greater durability and maximum heat dissipation.
• CE approved and RoHS complaint - This heavy duty inverter has all the protections that you will need. Overload, over voltage, under voltage, high temperature and short circuit.
• We have your back - You can’t go wrong with Power Bright! We believe in our product and quality and we offer the warranty that proves it – “1 Years parts and labor warranty”

User questions & answers

Question:	Hello, will this inverter run a 112v portable unit
Answer:	We have 4 for the slip. We don’t have them permanently attached and pull them in the boat when towing tubers or cruising above 10 mph. During a storm, we did have one shredded by the play between the wind, waves and movement against the dock. We have used the other 3 for 2 years. They hold up well to hot and cold (not freezing) temps and prolonged sun exposure. I love these for our pontoon.
Question:	Can i power a microwave single electric burner ,toaster and a small refrigerator t the same time? The inverter will be hooked up in my big semi truck
Answer:	We never needed to add air
Question:	Can i power a microwave single electric burner and a toaster at the same time? The inverter will be hooked up in my big semi truck
Answer:	6" x 15" are all we have
Question:	Is there a version of this unit available with a 50hz 120v frequency output
Answer:	Diameter (across) x length

Product features

Power Bright 1500 Watt 24V Power Inverter, Dual 110V AC Outlets - Back Up Power Supply Perfect for an Emergency, Hurricane, Storm or Outage

• 1500 Watts continuous power, 3000 Watts peak power
• 24 volt DC input
• Built-in digital display
• Dual 3 prong 120 Volt AC outlets
• Thermally activated turbo cooling fans
• Anodized aluminum case with heat sink design
• Greater durability and maximum heat dissipation.

This heavy duty inverter has all the protections that you will need

• Overload Protection
• Over Voltage Protection
• Under Voltage Protection
• High Temperature Protection
• Short Circuit Protection

PERFECT BACK UP POWER SUPPLY

The Power Bright ML1500 modified sine wave inverter converts 24V DC to 120V AC. This power inverter is an excellent solution to your mobile power needs, providing AC household current anywhere you go.

POWER ON THE GO!

Simply connect the inverter directly to a 24 Volt DC battery to power appliances, power tools and many other electronics from your truck, van, trailer or RV

EFFICIENTLY BUILT AND DESIGNED

This extremely advanced microprocessor controlled inverter, runs cooler and more efficiently than other units in its class.

Product description

• The Quadlitght XL Bi-Fold Ramp by Quadboss is heavy-duty and durable with a fully welded aluminum construction• Lightweight and compact for easy storage• Heavy-duty hinges and joints are welded for extra strength• Rubber-coated tabs protect your tailgate from scratches• Two year manufacturer's warranty• Adjustable security straps included and are required when using this product• Dimensions: 69″ x 48″

• Designed to deliver trouble-free, consistent performance
• Right for your vehicle and lifestyle
• Made from high-quality materials for ultimate durability
• Manufactured to meet or exceed strict quality requirements
• If you have any questions or need fitment information for your vehicle, please contact with us

• Slip-on protection from the sun, rain, dust and dirt
• Ideal for use with power chairs and wheelchairs transported with a hitch carrier
• Includes tie-down buckle securing straps and corner openings for tie-down strap access
• Lightweight, durable nylon fabric
• Made in the USA

User questions & answers

Question:	Will this cover fit on a pride maximum scooter
Answer:	Eye hole accepts rope size up to 5/8"
Question:	Will this fit a Permobil F5 it is 27 inches wide across the arm rests 26&1/2 at the wheels 38inches long front to back and floor to top of headrest
Answer:	Approximately 38 lbs.
Question:	How does this differ in quality and functionality from the challenger and ez-access covers also sold on amazon? trying 2 make an informed decision
Answer:	This item ships with (1) strap
Question:	Will it fit golden
Answer:	Mine came with 1 strap each, there are 2 different anchoring points on bumper

Product features

Silver Spring Mobility Scooter Travel Cover

Designed for use with scooters, this durable mobility scooter transport cover from Silver Spring has corner Velcro slits to secure over the tie-down straps, while two integrated webbing belts fasten underneath to hold the entire mobility cover in place for a tight fit. Exposure to weather can wear down your mobility aid before its time; a high-quality scooter cover will fend off the effects of rain, debris and sun while transporting your scooter behind your vehicle. This cover is made of lightweight, water-resistant nylon fabric with a rubber backing.

Corner slits allow you to firmly attach cover to carrier

Weatherproof fabric protects from rain, sun & debris

Straps on bottom keep cover secure in transit

Silver Spring - Scooter Covers and More

Silver Spring offers a variety of affordable products to make daily living more accessible for individuals with disabilities, and limited mobility, both in their own homes as well as long-term care and assisted living facilities. Silver Spring's product assortment includes threshold ramps, temporary and permanent wheelchair and mobility scooter ramps, lifts and carriers for transporting wheelchairs and mobility scooters, in addition to daily living and bath safety products.

• MANUFACTURED FROM DURABLE RUBBER: This sold rubber threshold ramp can easily accommodate uneven surfaces, and is perfect for use both indoors and out.
• 600 LB. WEIGHT CAPACITY: Designed to support up to 600 pounds, this threshold ramp can handle the majority of wheelchairs and power scooters.
• MEASURES 24" L x 42" W x 2-1/2" H: No assembly required, this ramp is easy to use. Simply lay it down on a clean surface and adjust as necessary.
• THREE BOTTOM CHANNELS: The three channels running underneath the ramp are perfect for protecting hoses, cables, wires, and cords, and eliminating tripping hazards.
• ACCOMMODATES MAXIMUM RISE OF 2-1/2": Perfect for use at home or work, this ramp is ideal for overcoming short rises in front of doorways.

User questions & answers

Question:	I have the 4" high version of this but it is not high enough. can i stack the 4" on top of the 2" to get my height? will it stay in place
Answer:	Please use this link to learn about the Taylor Made Lifetime Warranty on vinyl fenders. http://www.taylormadeproducts.com/support/faq/Fender_Warranty.pdf
Question:	Can you trim the ramp to size it
Answer:	2.0 psi for the smaller ones. 3-9"
Question:	Can I use this outside on my driveway to drive my car over it
Answer:	8" x 20"
Question:	Need to know exact measurement of rise. info says 2.5". one person says 3.5". product details says 3" -so what is the real measurement of rise
Answer:	The price is for one (1) fender. Thank you for your interest in the fenders.

Product features

Silver Spring Rubber Threshold Ramps

Easily overcome rises up to 4 inches high in your wheelchair, scooter, or power chair with the Silver Spring Rubber Solid Threshold Ramp. Good for home, work, or anywhere mobility is an issue, these ramps have a 600-pound weight capacity that can support most four-wheel mobility scooters. The solid rubber construction easily accommodates uneven surfaces and the textured non-slip surface fares well in all weather conditions. These ramps have three channels on the underside to accommodate hoses, cables or other small wires.

Protection for Cables or Hoses

The underside of these ramps has three channels so that garden hoses, extension cords, cables and other wires are protected and will not be crushed or damage by wheelchair or scooter wheels.

Heavy-Duty Weight Capacity

Weight capacity is important when choosing a threshold ramp, so don't settle! These ramps can support up to 600 pounds. Always make sure you calculate the combined weight of the scooter or wheelchair and the individual using it before selecting your ramp.

Superior Traction

In use, addition to indoors, use these rubber threshold ramps outside in any weather thanks to the raised grip lines that catch and break up precipitation. The durable grip will firmly hold foot or wheel traffic.

Silver Spring - Threshold Ramps and More

Silver Spring offers a variety of affordable products to make daily living more accessible for individuals with disabilities, and limited mobility, both in their own homes as well as long-term care and assisted living facilities. In addition to threshold ramps, Silver Spring's product assortment includes larger temporary and permanent wheelchair and mobility scooter ramps, lifts and carriers for transporting wheelchairs and mobility scooters, in addition to daily living and bath safety products.