10 best drive medical weight bars

Product description

This Parallel Bathtub Grab Bar Safety Rail by Drive Medical was designed to fit just about any style of bathtub. The attractive white powder coated steel frame is durable and aesthetically pleasing. The angle of the grab bar is parallel to the shower wall. The adjustable width clamp attaches by turning the locking mechanism which tightens the rubber pads on all bath tub contact points. The rubber pads prevents scratching of the tubs surface and ensure a secure fit. The Parallel Bathtub Grab Bar Safety Rail is easy to install without needing tools. Please note this safety rail is not for use on fiberglass tubs.

• Durable
• white
• powder-coated steel construction; Tool Free installation
• Width adjusts from 3" - 7" and handle design provides secure hand position
• Stainless steel locking mechanism and non-wearing rubber pads provide scratch-proof security
• Fits most tubs (not for use with fiberglass tubs)
• Overall dimensions: 5"(L) x 3"(W) x 14.5"(H); Adjustable Clamp: 3"-7"; Weight Capacity: 300 lbs

User questions & answers

Question:	Can you change the angle of the clamp to fit a tub that curves down
Answer:	There is very little adjustment in the clamping part of the devise. If this is like the old claw foot tub, I dough it would work. Good luck.
Question:	Does anyone know what I can use to cover the edges on the bottom outside metal part. My mother is worried that she will cut her leg on the corners
Answer:	I dont know of anything specifically you can use to cover the edges, however they are not sharp and shouldnt pose any issues.
Question:	will this fit on a corner large bathtub? needing to get some for my parents! just want to make sure they fit
Answer:	I don't believe it will open enough to fit on a corner.
Question:	Why can't this device be used on a fiberglass tub
Answer:	I suspect it is not recommended for fiberglass tub because fiberglass tub walls tend to be not as solid as steel tub walls, thus the clamp might not be able to grab tight enough to the tub, which will increase chances of the tub rail slipping when someone puts much weight on it. There is a chance of damaging/cracking the fiberglass tub wall as well. If you use this with a fiberglass tub, keep in mind you are using it in a way that it is not designed for and the manufacture has warned against using it that way.

Product features

Durable, white, powder-coated steel construction

This Parallel Bathtub Grab Bar Safety Rail by Drive Medical was designed to fit just about any style of bathtub. The attractive white powder coated steel frame is durable and aesthetically pleasing. The angle of the grab bar is parallel to the shower wall. The adjustable width clamp attaches by turning the locking mechanism which tightens the rubber pads on all bath tub contact points. The rubber pads prevents scratching of the tubs surface and ensure a secure fit. The Parallel Bathtub Grab Bar Safety Rail is easy to install without needing tools. Please note this safety rail is not for use on fiberglass tubs.

Product description

This Adjustable Height Bathtub Grab Bar Safety Rail by Drive Medical was designed to fit just about any style of bathtub. The attractive white powder coated steel frame is durable and aesthetically pleasing. The grip bar adjusts from 14" to 17" allows you to find the perfect height for your needs. The angle of the grab bar is parallel to the shower wall. The adjustable width clamp attaches by turning the locking mechanism which tightens the rubber pads on all bath tub contact points. The rubber pads prevents scratching of the tubs surface and ensure a secure fit. The Bathtub Grab Bar Safety Rail is easy to install without needing tools. Please note this safety rail is not for use on fiberglass tubs.

• Durable, white, powder coated steel construction
• Stainless steel locking mechanism and non wearing rubber pads provide scratch proof security
• Fits most tubs (not for use with fiberglass tubs)
• Tool free installation
• Clamp Size: 3" 7"; Handle Height: 14" 17"; Weight Capacity: 300 lbs.Handle design provides secure hand position

User questions & answers

Question:	Where can I get address for Drive medical company
Answer:	99 Seaview Blvd Port Washington NY 11050 516-998-4600 877-224-0946
Question:	i have looked at many like products most have some type of wobbling problem even after tightening to the best of my ability , is there a feature to prevent this
Answer:	It has worked very well for us. We have not had to tighten it since we installed it. No problems whatsoever. I rely on it everyday and would recommend it.
Question:	Why a weight limit? Does it matter if it's just being used as something to grab getting out of the shower
Answer:	Hi InPinkClover, Thanks for your interest in the Drive Medical Adjustable Height Bathtub Grab Bar Safety Rail. This grab rail has a weight limit because if too much weight is placed on the grab rail it can cause it to snap or break much like anything that too much force is applied to. The weight limit is too ensure that under that weight it will not break.
Question:	How can it help while showering - isn't it behind the shower curtain when the curtain is closed
Answer:	no, it doesn't help while showering, as it IS behind the shower curtain. It is only helpful for securely getting in and out of the bath tub safely. If you need help in the shower, I would recommend grab bars attached to the wall.

Product features

Safety Rail is easy to install and adjusts from 14-17 inch to provide stability.

This Adjustable Height Bathtub Grab Bar Safety Rail by Drive Medical was designed to fit just about any style of bathtub. The attractive white powder coated steel frame is durable and aesthetically pleasing. The grip bar adjusts from 14 to 17 inch allows you to find the perfect height for your needs. The angle of the grab bar is parallel to the shower wall. The adjustable width clamp attaches by turning the locking mechanism which tightens the rubber pads on all bath tub contact points. The rubber pads prevents scratching of the tubs surface and ensure a secure fit. The Bathtub Grab Bar Safety Rail is easy to install without needing tools. Please note this safety rail is not for use on fiberglass tubs.

Product description

The Adjustable Height Home Bed Assist Handle from Drive Medical provides assistance for getting in to and out of your home-style bed. You won't have to worry about the fit since the handle attaches to either side of the bed. It simply slides underneath the mattress and includes an added feature on the base bar, "no-slip foam" that helps hold the bar in place. The removable handle is part of an all steel, chrome-plated construction that is strong, solid and easy to clean. The unit arrives in three pieces and can be assembled quickly and tool-free, and it also can be adjusted flat for easier storage.

• Simple to use handle slides under mattress to provide a safe and secure grip for assistance getting into and out of bed
• Comes in three easy to assemble pieces; No tools necessary. Height adjustment 15 - 20 inches
• No slip foam on base board for increased stability
• Folds flat for easy storage and portability
• Rail dimensions: 32.75"(D) x 19.75"(W) x 13.5 16.5" (H); Weight capacity: 250 pounds

User questions & answers

Question:	It look like the distance between the horizontal rails and the grab bar is fixed. What is the distance between the horizontal rails and the grab bar
Answer:	The grab bar height is actually adjustable. It looks like the grab rail is ABOUT 34" - 39" from the floor. I do not have it installed, so that may be off a little. I can't install it because the legs (even though ajustable) are too tall for my older box spring & frame. Before it can work at my house it would have to fit between the box spring and mattress. My mattress is a little over 14" off the ground. The legs are about 16" tall at their lowest, so installed, the stabilizing bar lifts the mattress off the box spring top. That is a rough measurement because I can't lift the mattress by myself to get the stabilizing bar back in there. Lost my helper to the surgery for a while yet - so I can't be exact. No lifting here at all for a couple more weeks. Sorry about that. It would be a good idea for the right bed. Maybe the manufacturer can give the exact measurements. The adjustable ranges are not printed in the documentation. Unfortunately I tossed it all as well as the box so I can't help with manufacturer's name either.
Question:	What is the weight capacity for this and will it prevent falling out of bed as well as help getting up
Answer:	I don't know what the weight capacity is, my husband is 6'3" and weighs 215 lbs and it works for him. As far as falling out of bed, it depends on where you place it. It definitely helps getting in and out of bed. My mom is 91 and we have one for her as she falls out of bed frequently and she hasn't fallen out singe installing it on her bed.
Question:	Is it possible to place this with the legs inside the bed frame instead of the outside? I'm concerned my dad would trip over the legs
Answer:	The legs do not stick out but sit right up next to the bed frame if you put the device up under the mattress far enough. My mom loves hers. Helps her turn over and sit up on the edge of the bed. She uses a walker also and there is no problem with the device interfering with the walker.
Question:	What is the lowest it can be adjusted to? How far does it insert under the mattress
Answer:	The lowest adjustment to the handle height is sixteen inches (16") from the floor to the box mattress, the highest is 20 plus inches (20" plus). We have a low profile box mattress (13" from floor) so it didn't work. It goes under the mattress 32" to 40". I could see where this item would work very well with a higher box mattress (16" plus from the floor) and therein lies the problem for us.

Product features

Assistance for getting in and out of home-style bed

The Adjustable Height Home Bed Assist Handle from Drive Medical provides assistance for getting in to and out of your home-style bed. You won't have to worry about the fit since the handle attaches to either side of the bed. It simply slides underneath the mattress and includes an added feature on the base bar, "no-slip foam" that helps hold the bar in place. The removable handle is part of an all steel, chrome-plated construction that is strong, solid and easy to clean. The unit arrives in three pieces and can be assembled quickly and tool-free, and it also can be adjusted flat for easier storage.

Product description

If you suffer from poor balance, arthritis, limited mobility, or injury issues, you know how difficult many everyday activities can be. Don't let something as simple as using the bathroom be one of them! Using the Toilet Safety Rail offers secure assistance when sitting on, or standing up from, the toilet. This free standing unit is assembled easily without tools to surround your existing toilet, whether standard or elongated. The padded handles are easy to grip and comfortable to rest your arms on. It even has a handy magazine rack attached to keep your reading materials in reach!

• Comes with convenient magazine rack
• Freestanding around toilet to fit both standard and elongated seat toilets
• Comes with padded armrests for added comfort
• Easy, tool free assembly
• Width Between Arms: 21"; Arm Height: 25.5"; Weight Capacity: 300 lbs

User questions & answers

Question:	what is the inside width
Answer:	In the app, you have to go to your orders and tap where it says return or replace, it asks how you want your refund and if you want to go to UPS or kohls to do it.
Question:	rubber feet
Answer:	It would, but with absolutely no room to spare. I measured from Left side knobs to Right side knobs. There would be no room for the little magazine rack (very easily removable). Anyway, from knob to knob, it's exactly 28" inches. It's a great product; I hope it will fit. If your space is 27-7/8" ... nope. If a full 28" it will fit, but the knobs will touch the walls.
Question:	Does this have anything on the feet to prevent slipping
Answer:	Hi! My name is Jasmine and I am with Beyond Med Shop. The stand-alone toilet rail weighs approximately 10 pounds without the box. I hope this clarifies your question. Please do not hesitate to contact us at [email protected] if you require additional assistance.
Question:	does it mount to floor, if not what keeps person from tipping forward
Answer:	12.5’’ to 17.5’’ between clamps, 22.5’’ to 24.5’’ between rails.

Product description

The 18" Poly-Fly High Strength Lightweight Wheelchair/Flyweight Transport Chair Combo by Drive Medical can be used as a standard, self propelled wheelchair or as a transport chair, all-in-one for your convenience. The quick release 24" wheels can be easily removed to transition from a wheelchair to a transport chair. Also comes with two sets of aluminum wheel locks, one for use with wheelchair and one for use with transport chair, for added safety. The deluxe back release folds down the backrest for easy and convenient storage and transportation. Comes standard with easy to clean nylon upholstery, swing away footrests, composite crack-proof footplates, heel loops and 8" caster wheels that provide a smooth ride over most surfaces.

• Wheelchairs & accessories
• Pollywog wheelchair/transport combination chair 18
• Made in: United States

User questions & answers

Question:	Are the foot rests removable
Answer:	The foot rests are removable
Question:	does this chair have anti-tippers
Answer:	Yes it does. I LOVE this chair. I've been very pleased with mine.
Question:	The picture does not show the large back wheels so does it come with them
Answer:	Yes, this unit comes with the quick release removable 24" wheels. On the left side of the listing in the photo section you can click to enlarge and will be able to see those wheels.
Question:	all terraine wheels
Answer:	Thank you for your question. This model also comes with the 24" wheels, which are removable if needed for use as a transport chair. They can roll easily over dirt, most gravel and other outside surfaces. It's not exactly meant for a trail, but it's possible. You would need to check with the manufacturer Drive Medical if this model is able to have other styles of wheels.

Product description

Dual Pad Steerable Knee Walker with Basket, Alternative to Crutches.

• 8" casters are ideal for indoor/outdoor use. Ideal for individuals recovering from foot surgery, breaks, sprains, amputation, and ulcers of the foot
• Knee walker can be steered for increased maneuverability. Durable, steel frame with silver vein finish; Comes with a removable front basket
• Do not operate on inclines above 15 degrees slight incline. Do not travel over drops or barriers such as curbs or parking stops
• Deluxe braking system for increased safety. Weight Limit is 300 pounds
• Overall Dimensions: 30"(L) x 16"(W) x 31"(H); Knee Pad Dimensions: 15"(L) x 7"(W) x 16.5" 20.5"(H); Handle Height: 31" 40"

User questions & answers

Question:	Does Medicare cover this as a purchase
Answer:	Medicare Part B (Medical Insurance) covers walkers as durable medical equipment (DME). The walker must be Medically necessary and prescribed by your doctor or other treating provider for use in your home. No, although exceptions exist under Medicare Part B (80%-20%) if deductibles are met. If you can get a doctor's prescription saying that crutches or canes will not provide the support needed, it may be possible for Medicare Part B to cover a knee walker. Medicare considers this to be a luxury medical device; not one of necessity when crutches will suffice. Also, Medicare will only cover your DME if your doctors and DME suppliers are enrolled in Medicare. Doctors and suppliers have to meet strict standards to enroll and stay enrolled in Medicare. If your doctors or suppliers aren’t enrolled, Medicare won’t pay the claims submitted by them. So ask your supplier first in they participate in Medicare. AMZ is NOT an approved Medicare supplier. Please check locally.
Question:	are small or large wheels important. what is the difference in using the scooter
Answer:	The big difference with the scooter is that you don't have to use crutches!! It is so much more comfortable! I still needed crutches to use stairs, but otherwise this enabled me to go out and do things. It is painful and exhausting to use crutches. I don't think the size of the wheels make any difference.
Question:	Do the brakes lock without having to hold the handle in
Answer:	Do the brakes have a locking button or lever that keeps the brakes locked without having to hold the brake by hand? There are conflicting answers posted.
Question:	How much does this unit weigh
Answer:	This unit weighs approximately 6 lbs. The basket is detachable which makes the unit lighter. The ease of use and light weight make this device user friendly.

Product description

If you find yourself experiencing balance problems or fatigue when entering, exiting, or standing in the shower, a grab bad can help. The easy to install bar mounts firmly to your shower wall, giving you a strong and secure handhold. Attractive and durable, the grab bar mounts horizontally or vertically to enhance bathroom accessibility.

• Mounts vertically or horizontally
• Durable, white powder-coated steel is attractive and easy to clean
• 1.5" distance from wall
• Strong and secure
• Dimensions: 12"(L) x 3"(W) x 3"(H)

User questions & answers

Question:	does this work with tile
Answer:	The mounting flange is 3" in diameter, and the escutcheon plate that covers the mounting flange is about 3-1/4" in diameter. Details: https://www.amazon.com/dp/B07CLHBN4X?ref_=pe_527950_33920250_dpLink&th=1
Question:	What is the exact length measured from the outside of the flanges
Answer:	That's 2-1/16 inches
Question:	when installed, how far does the furthest part of the bar protrude from the wall
Answer:	I DIDNT NEED ANY ADDITIONAL HARDWARE, YOU DO NEED A DRILL BIT AND SCREW DRIVER.
Question:	what diameter is the bar? 1 1/2 or
Answer:	Ray, If bar is being mounted to wooden wall studs, hole in tile should be large enough for the fastener to pass through. You want the fastener to pull against the wood & not the tile, which you may break. If mounting with plastic anchors start with a 3/16” bit & perhaps enlarge with a screw driver to achieve a tight fit.

Product features

Mounts vertically or horizontally

If you find yourself experiencing balance problems or fatigue when entering, exiting, or standing in the shower, a grab bad can help. The easy to install bar mounts firmly to your shower wall, giving you a strong and secure handhold. Attractive and durable, the grab bar mounts horizontally or vertically to enhance bathroom accessibility.

Product description

Using the bathroom shouldn't be a difficult chore. If reduced mobility makes getting to the bathroom a challenge, a home care commode can be a necessity. The Folding Steel Commode from Drive Medical can be easily setup in any room of the house for ultimate convenience. In addition, it can be used without the bucket and placed over an existing toilet as a secure, raised toilet seat for those who have difficulty bending to sit on a standard toilet. The Folding Steel Commode also makes a great toilet frame offering assistance when sitting on, or standing up from, the toilet. The durable, easy to clean unit features simple snap button assembly that allows the commode to be disassembled for storage or transport. Easy push button height adjustment places the seat at the ideal level for you. The 7.5 quart commode bucket includes a convenient carrying handle, a cover and a splash shield. The commode also features plastic armrests for extra comfort and superior grip.

• Easy, tool-free snap-button assembly easily opens and folds for storage and transportation
• Durable plastic snap-on seat and lid, and Plastic arms for added comfort
• Powder-coated steel-welded construction
• Includes 75 qt commode bucket with carry handle, cover, and splash shield
• Weight Capacity: 350 lbs; Seat Dimensions: 16.25"(D) x 13.75"(W) x 17"-23"(H); Width Between Arms: 18.125"; Outside Legs Width: 22.25"

User questions & answers

Question:	How wide is the space between each handle
Answer:	Hello,Thank you for your inquiry, Yes it can be used over a regular toilet.Thank you again, Luis @ DriveLink http://www.drivemedical.com/index.php/folding-steel-commode-retail-2.htmlItem RTL11148KDR; Folding Bedside Commode with Bucket and Splash Guard
Question:	It specifies seat height 17 to 23 inches. Does this mean that you can adjust the seat height from sitting position to floor up to 23 inches
Answer:	Dk
Question:	I saw in another customer question that this is just the frame without the toilet seat? what use is it then? does this really not come with a seat
Answer:	this chair has lots of room............very comfortable. it was very easy to assemble and was the easiest one i could see to empty.....just lift the seat and the pail has handles to pick it right up. i highly recommend it.
Question:	Can this be used over a regular toilet instead of with the commode
Answer:	In searching how to use splash guard, I discovered it is like a funnel that is used when using commode over toilet. The guard "replaces" the bedside commode bucket and directs urine and feces to toilet bowl. It is not a splash guard to use with bucket to contain urine inside bucket when using as bedside commode. It would sure be nice to have guard for those men with shriveled penis that tend to "stick up" when they urinate, therefore urinating over seat onto floor. Please excuse my explicit explanation, but I wanted to explain it very clearly. Also, it would be nice to have "optional" wheels that retract it you wish to use as bedside commode and/or over toilet. It is lightweight and I can carry, but some others may not be able to do so. I am not complaining about this commode, as it is wonderful and am only making suggestions that "I" feel might help.

Product features

Drive Medical Steel Folding Frame Commode

Features:

• Easily opens and folds
• Folds flat for convenient storage and transportation (Figure A)
• Durable plastic snap-on seat and lid (Figure B)
• Assembles without pushing buttons (Figure B - D)
• Grey powder-coated steel-welded construction increases strength and durability
• Plastic arms for added comfort
• Comes complete with 8 qt commode bucket with carry handle, cover and splash shield

Product description

Ideal for home use or when traveling, the Over Door Traction Set is a simple and effective device for relieving pain. The unit fits easily over the top of most doors while the included water bag lets the user tailor the desired level of traction just by adding the appropriate amount of water. Plus, the spreader bar allows you to adjust the halter's width to the ideal position.

• Heavy-duty head halter comes complete with metal support and self-attaching closures
• Complete with 12" adjustable spreader bar, 8' traction rope, double-sealed rings, water bag, and "S" hook
• Machine washable
• One size fits all
• Overall Dimensions: 15"(L) x 7"(W) x 3.25"(H)

User questions & answers

Question:	my strap is in bad shape how can I repalce it
Answer:	sorry but this item is sold as a whole unit. Maybe you can try calling Drive Medical to get a replacement for the strap. Many thanks
Question:	how do you put the straps around your head
Answer:	Put the straps around your head as shown in the picture before attaching the straps to the crossbar. Then, while sitting below the arm and pulley, pull the cross bar down with one hand. With the other hand, grab the ring in the corner of the straps, on one side of the head and slide the crossbar through the ring until the ring falls into one of the slots on the cross bar.Change hands holding the crossbar without releasing it. Then use the other hand to grab the ring on the other side of the straps. Thread the crossbar on that side of the head, through the ring and slide in into the same slot position as you did before. Slowly release the crossbar putting tension on the neck.Hope this helps
Question:	What is the correct way of using this device, facing away from the door, or facing the door. Heard facing away is not correct, best, or wise
Answer:	I have done it facing the door but the picture shows away from the door. As long as you are getting traction I would think whichever way is more comfortable for you.
Question:	Can sand be used instead of water
Answer:	I've never used sand in the pouch that comes with the unit; however the pouch does seem strong enough to use sand. Keep in mind that sand weighs close to 50% more than water in a volume measurement so if you used 2 gallons of water that's just under 17 pounds and 2 gallons of sand is a little over 25 pounds. I use my traction set hooked up to a weight stack using as much as 40 pounds. The metal and strapping holds fine. It's a bit tough on my jaw and teeth so if you use 25 pounds or more of sand you will be using more than the manufacturer wants used on the unit and I would suggest a mouth guard id you have one. Hope that helps.

Product features

Comes complete with metal support and self-attaching closures.

This cervical traction set by Drive Medical features a heavy-duty head halter for over door use. The halter includes several items to make use easier: a metal support; self-attaching closures; a 12 inch adjustable spreader bar; an 8 feet traction rope; double-sealed rings; water bag; and "S" hook. The set is one-size-fits-all and comes machine washable for additional convenience.

Product description

Drive's white powder coated steel assistive bed M-Rail provides support when getting into and out of bed. It also gives added independence to someone who may need help to sit up, reposition, stand, or transfer out of bed to a mobile device like a walker or wheelchair. Its compact and ergonomically contoured M shape handle with a padded, no-slip grip allows for various hand positions to accommodate any user. Multiple crossbars creates easy grip for any height use. The special extra-long nylon safety straps wrap around the mattress or box spring to ensure a secure fit. It fits bed widths from single to king size. Also, included is a black accessory pouch with pockets that can hold personal items such as, glasses, television remote, magazines and much more. Assembly is quick and tool-free making this perfect for any home or for travel.

• Designed to provide support when getting into and out of bed and when moving from a lying position to a sitting position
• M shape allows for multiple hand positions to accommodate any user
• Multiple crossbars creates easy grip for any height use; Includes accessory pouch for storing remote controls, glasses, magazines and more
• The maximum recommended weight is 300 pounds
• Special extra-long safety strap enables user to be in a single, twin, double, queen or king size bed

User questions & answers

Question:	Would this work with a invacare medical bed ? The mattress is foam so there is not much weight to it. Could the strap be wrapped around the metal fram
Answer:	Yes. I believe it would work. The straps could wrap around the frame.
Question:	Is it easy to assemble
Answer:	Yes, very easy to assemble! Definitely easy with 2 people to guide the strap around the bed, but it's manageable with only 1 person.
Question:	What works better for an adjustable bed, drive medical m-rail home bed assist or mgrip adjustable contoured bed rail ? they look the same
Answer:	I have a Tempurpedic adjustable bed and the m-rail works perfectly.
Question:	Will this work in a queensize Tempurpedic adjustable bed when the head is elevated
Answer:	It works well for my dad's adjustable bed. Make sure to install the straps on the movable part of the bed so the handle moves with it.

Product features

Drive Medical M-Rail Home Bed Assist Handle with Pouch

• Designed to provide support when getting into and out of bed and when moving from a lying position to a sitting position
• M shape allows for multiple hand positions to accomodate any user
• Multiple crossbars creates easy grip for any height use
• Easy, quick assembly
• Safety strap wraps around mattress or box spring to ensure a secure fit
• Special extra-long safety strap enables user to be in a single, twin, double, queen or king size bed
• Made of powder coated steel for long life and easy cleaning
• Includes accessory pouch for storing remote controls, glasses, magazines and more

About Us

Drive DeVilbiss Healthcare was formed in January 2000 under the name Medical Depot.Inc. Not long after the Company was started, the ownership recognized the opportunity to reflect the spirit of the Company and the quality of life it provides to the users of their products, and therefore, changed the name to Drive. This culture and drive led to the significant growth and the formation of a multi-national organization. The continuous growth and expansion throughout the years is supported by the best professionals in the business, state-of-the-art technology and an undying winning attitude. When DeVilbiss Healthcare was acquired in 2015, the Company became known as Drive DeVilbiss Healthcare.