11 best samsung tv mounting screws
Samsung TV mounting screws are an essential component when it comes to attaching your Samsung television to a wall mount, ceiling mount, or stand. These screws are designed to securely fasten your TV to the mounting hardware, ensuring stability and safety. Here are some key points to consider:
Size and Type: Samsung TVs typically use M8 screws, which refers to the metric thread size of the screw. However, the specific size and type of screws required can vary depending on the model and size of your Samsung TV. It's crucial to consult your TV's user manual or the manufacturer's website to determine the exact screw size and type needed for your specific model.
Length: The length of the mounting screws is essential to ensure a secure fit. Using screws that are too long can damage the internal components of your TV, while screws that are too short may not provide a secure attachment. Always use the recommended screw length specified in the user manual or by the manufacturer.
Thread Pitch: Pay attention to the thread pitch, which is the distance between threads on the screw. This should match the threading on both the TV and the mounting hardware for a proper fit.
Material and Quality: High-quality screws are essential to ensure a secure and reliable mount. Low-quality screws may strip or break, potentially causing damage to your TV or creating a safety hazard. It's advisable to use screws provided by the TV manufacturer or purchase reputable, compatible mounting screw kits.
Installation Instructions: Follow the installation instructions provided in your TV's user manual or with the mounting hardware carefully.Over-tightening screws can damage your TV or mount, so it's important to use the recommended torque specifications.
Additional Accessories: Depending on your specific mounting setup, you may need additional accessories such as washers or spacers to ensure a secure and level installation. Again, refer to your TV's manual or consult with the mounting hardware manufacturer for guidance.
Compatibility: If you're using a third-party wall mount or ceiling mount, make sure it is compatible with Samsung TVs. Some mounts are designed to work with specific brands or TV sizes, and using an incompatible mount may result in an unstable installation.
In summary, when mounting a Samsung TV, it's crucial to use the correct size, length, and type of screws recommended by the manufacturer to ensure a safe and secure installation. Always consult your TV's user manual and follow the provided instructions for the best results.
Below you can find our editor's choice of the best samsung tv mounting screws on the marketProduct description
Extra Long M8x45mm TV Mounting Bolts with 25mm Long Spacers for Samsung LG Vizio Philips Sony Bravia Sharps
This packet contains:
4x Stainless steel, Phillips Head M8 x 45mm long bolts4x Plastic 10mm long spacers.
4x Plastic 15mm long spacers.
4x Stainless steel 8mm flat washers
- M8x45mm TV Mounting Bolts with 25mm Long Spacers.
- Fit for 41 inch or Larger Samsung LG Vizio Philips Sony Bravia Sharps etc.
- Install with Phillips head screwdriver
User questions & answers
Question: | Will they fit a q70t 75 inch |
Answer: | Yes it should but you might have to modify the black plastic piece to make it a flush mount. |
Question: | Will these fit a samsung un40fh |
Answer: | Yes,it can work. |
Question: | Will these work for the samsung un55ku6300fxza 55-inch tv |
Answer: | 10.24L x 9 W x 6.3 H in inches. Perfect size for a lunch. It's not tiny, so you have do not have to cram things in to zip it shut. Also it is not flimsy and holds it shape nicely |
Question: | Would this work for Samsung 7 series |
Answer: | No hard liner in it. It will flatten out. Great cooler |
- Includes all the hardware you'll need to attach your TV to a wall mount in one easy to use pack. That means no more mount compatibility issues with your TV.
- Pack contains M4, M5, M6, and M8 TV screws and spacers for mounting virtually all TV's up to 82". It'll ensure you aren't screwed when it comes to mounting your TV.
- Compatible with every major TV brand out there. TCL, Sony, LG, Sharp, Philips, Panasonic, and more. M8 screws even guarantee compatibility with Samsung TVs, which tend to have TV mount compatibility issues.
- These are not your average screw. Built to be insanely durable & strip-resistant, they'll stay tight and last. Combine the included spacers with the screws to accommodate uneven TV backs.
- All hardware is pre-divided & labeled to help you pick the exact screws you need without hassle. Extra screws can be thrown in your toolbox and used for any other project.
User questions & answers
Question: | I have samsung un43m5300af model.. can't find my screws for the stand ... will any of these work for this model |
Answer: | Unfortunately this hook is not made for your framing gun . This hook is designed for bostich brad & finish nailers . |
Question: | Are these vesa compliant |
Answer: | If I remember correctly, it did. |
Question: | I don't need to mount my tv. I just need screws for my tv base. Will this work? I lost the original screws when moving |
Answer: | It's safe to use on concrete. I use it all the time on concrete surfaces. |
Question: | Will these work with the mounting Dream mount |
Answer: | We used it in our garage on a unsealed floor works well so I would say you are fine. |
Product description
The 4 set screw kits are for attaching your Samsung TV to the wall mount
Metric M8 machine screws with 1.25mm threaded pitch and 45mm threaded length, the included spacers one is 15mm long, one is 10mm long, washer is 2mm in thickness
These wall mounting screws bolts work with Samsung 50" 55" 60" 65" 70" 75" 82" TV
These screws bolts kit had been tested to fit the below model: MU8000, 50" NU6900, NU7100, NU7200, 65" KS8000, 65" UN65MU8000, UN49MU8000, UN75NU8000, UN65NU6900F, 65" KS8500 flat version, RU8000 curved version
Note: Take a look at the manual for you TV Mount bracket as well as on TV manual - it will tell you what size needed to hang it !
- The 4 set screw kits are for attaching your Samsung TV to the wall mount
- Metric M8 machine screws with 1.25mm threaded pitch and 45mm threaded length, the included spacers one is 15mm long, one is 10mm long, washer is 2mm in thickness
- These wall mounting screws bolts work with Samsung 50" 55" 60" 65" 70" 75" 82" TV
- These screws bolts kit had been tested to fit the below model: MU8000, 50" NU6900, NU7100, NU7200, 65" KS8000, 65" UN65MU8000, UN49MU8000, UN75NU8000, UN65NU6900F, 65" KS8500 flat version, RU8000 curved version
- Note: Take a look at the manual for you TV Mount bracket as well as on TV manual - it will tell you what size needed to hang it !
User questions & answers
Question: | Will it work for a samsung series 6? specifically a un55nu |
Answer: | Yes,it can work. |
Question: | What is the thread pitch |
Answer: | Yes they will because it may be slightly longer than you want just add a spacer and you will be golden. |
Question: | Would this work for Samsung 7 series |
Answer: | One pillowcase comes with the twin set. I also ordered a full set, and two pillowcases came with that set. |
Question: | Will these work for q70r 65 inch? samsung specs call for m8 x |
Answer: | I think they are 15". They fit a very thick mattress very well. |
Product description
This WALI product is a whole bag of screws with washers and spacers. It includes M4, M5, M6, and M8 TV screws and spacers which can meet various mounting requirements and work for all TVs up to 80". Our hardware kit was designed to maximize compatibility between all types and brands of TV such as Samsung curved TVs. It is very convenient to attach your TV to the Mount or Wall by using these screws.
Package includes:
M4 Screws--12mm/0.47 inches/ 4 pieces
M4 Screws-- 35mm/1.38 inches / 4 pieces
M5 Screws-- 12mm/0.47 inches/ 4 pieces
M5 Screws-- 35mm/1.38 inches / 4 pieces
M6 Screws--12mm /0.47 inches/ 4 pieces
M6 Screws --20mm/0.79 inches 4 pieces
M6 Screws -- 35mm /1.38 inches / 4 pieces
M8 Screws -- 16mm/0.63 inches / 4 pieces
M8 Screws -- 20mm/0.79 inches /4 pieces
M8 Screws -- 25mm/0.98 inches /4 pieces
M8 Screws -- 30mm/1.18 inches /4 pieces
M8 Screws -- 35mm /1.38 inches /4 pieces
M8 Screws -- 40mm/1.57inches /4 pieces
M8 Screws -- 45mm/1.77inches /4 pieces/ Necessary for Samsung Curved TVs
M8 Screws-- 50mm/1.97inches /4 pieces/ Necessary for Samsung Curved TVs
M4/M5 Washers/ 8 pieces
M6/M8 Washers/ 8 pieces
2.5mm Spacer/ 8 pieces
22mm Spacers/ 4 pieces
- Design: This product is a whole package of screws with washers and spacers. It includes M4, M5, M6, and M8 TV screws and spacers up to 80" TV.
- Purpose: Our hardware kit was designed to maximize compatibility between all types and brands of TV such as Samsung curved TVs.
- Complete: The 88 pieces include all shapes/ sizes of screw, washers, and spacers, our complete set of pre-divided hardware ensures your installation to be easier.
- Ease of Use: The size of all the screws shown on the package, it is easier for people to figure out easily what they need to use.
- Package Includes: 1 x WALI UVSP Package, User Manual, 10 Year Protection
User questions & answers
Question: | Are the 8 screws which attach the arms to vesa mount included |
Answer: | Yes a garden sprayer works |
Question: | Will this fit samsung qled 65 inch |
Answer: | Lowes does carry it, but in smaller containers that may be more expensive. |
Question: | Will this fit Samsung tv 75 inch |
Answer: | Yes, it may be sprayed with a garden sprayer or a sprayet. You must back brush immediately after spraying. |
Question: | Will the screws fit samsung electronics un40mu |
Answer: | We do not recommend this with any of our products. |
Product features
UVSP
This product is a whole package of screws with washers and spacers, it includes M4, M5, M6, and M8 TV screws and spacers which are total 88 pieces, those can meet various mounting requirements and work for all TVs up to 80"
- 🔨 ALL YOU NEED IN ONE BOX: Mounting Dream TV mount hardware comes with everything you'll need to attach your TV to your TV mount. Universal kit ensures compatibility for TVs up to 82", including M4, M5, M6, and M8 TV screws, washers & spacers.
- 🔨 FITS ALL TV BRANDS: Our TV wall mount hardware works with all TV brands: Samsung LG Toshiba Panasonic Sony Vizio TCL Sanyo Insignia Sharp Philips Hitachi Polaroid RCA JVC Apex Daewoo Pioneer Hisense & more.
- 🔨 BETTER CLASSIFICATION IN ORGANIZER BOX: Different size of TV screws, washers & spacers are assorted by Plastic Divided Storage Case with specific dimension to make your job easier.
- 🔨 MORE FREE GIFTS: The TV mount screw kit included necessary Philips Screwdriver, pencil and bubble level as free gifts.
- 🔨 US BASED CUSTOMER SUPPORT: We are glad to answer your pre-purchase and installation questions.
User questions & answers
Question: | What screws for a 55 inch LG al thinQ |
Answer: | No para las patita no solo para la base del tv |
Question: | will this be able to mount a 43 inch samsung 4k UN43NU7100? if not what kind of screws will i need |
Answer: | They fit my NU7200. |
Question: | Will these fit a samsung un65f |
Answer: | It worked for my Samsung 55” Curved TV. It lists in the user manual that comes with the TV exactly which screws you need. |
Question: | Are these stainless steel bolts |
Answer: | 1.25 |
Product features
What is included in package?
M4 x 12mm Screws M4 x 30mm Screws ·
M5 x 12mm Screws M5 x 30mm Screws ·
M6 x 16mm Screws M6 x 20mm Screws
M6 x 30mm Screws
M8 x 16mm Screws M8 x 20mm Screws
M8 x 25mm Screws M8 x 30mm Screws
M8 x 35mm Screws M8 x 40mm Screws
M8 x 45mm Screws M8 x 50mm Screws
Spacers & Washers
FIT FOR ANY TV AND TV MOUNT
MD5756 TV screws hardware kit is compatible with every brand of TV mount and TV. It comes with M4, M5, M6, M8 TV screws and spacers. 99 PCS TV mounting hardware. You can have it all in a organizer box.
BONUS IN PACKAGE
We got those necessary tools for your TV mounting installation.
- Philips Screwdriver*1
- Pencil*1
- Bubble Level *1
NO MORE RUSH TO HARDWARE STORE
Works with whatever TV you've got. Your TV mounting game will be easier. Universal kit ensures compatibility for TVs up to 82".
Product description
🔨 Solid mounting screw bolts hold your Samsung TV securely
🔨 Fit for any TV wall mount brackets
🔨 Pack contains M8x45mm TV screws and 2mm washers for mounting Samsung TVs. It'll ensure you aren't screwed when it comes to mounting your TV
🔨 These TV mounting screws bolts work with Samsung 7 and 8 series TV, TV model 65nu8000, Samsung 55” QLED, 75" QLED TV, 49" Samsung NU8000, 49" Samsung q6, 55" Samsung NU6900, 65” Samsung MU8500, 75" Samsung NU7100, 2018 Samsung Q6 flat TV, Samsung 65”curved TV, Samsung Q8F TV etc.
🔨 Need M8x45mm screws or M8x43mm screws, this pack is your best choice ;)
- 🔨 Solid mounting screw bolts hold your Samsung TV securely
- 🔨 Fit for any TV wall mount brackets
- 🔨 Pack contains M8x45mm TV screws and 2mm washers for mounting Samsung TVs. It'll ensure you aren't screwed when it comes to mounting your TV
- 🔨 These TV mounting screws bolts work with Samsung 7 and 8 series TV, TV model 65nu8000, Samsung 55” QLED, 75" QLED TV, 49" Samsung NU8000, 49" Samsung q6, 55" Samsung NU6900, 65” Samsung MU8500, 75" Samsung NU7100, 2018 Samsung Q6 flat TV, Samsung 65”curved TV, Samsung Q8F TV etc.
- 🔨 Need M8x45mm screws or M8x43mm screws, this pack is your best choice ;)
User questions & answers
Question: | Will these fit on samsung qn43q60tafxza |
Answer: | Hi,the M8 can fit the samsung electronics TV,but the length of the screws depends on your TV. If you have any other questions, please feel free to contact us:[email protected]. |
Question: | How long are the M8 screws |
Answer: | I no longer have them so can't be sure - however, they were about 1 1/2 inches long. These screws were advertised as being for Samsung TVs, but they did not fit my Samsung TV. Fortunately, the stand I bought had screws included (a wide variety), two of which worked for me. As I look at the screen on which the question appears, I see it says the screws are M8 x 45mm/43mm. Accordingly, it appears they are 43 to 45 mm in length, which converts to about 1.7 inches. |
Question: | Will these fit a samsung q70t 82 inch model tv |
Answer: | Yes |
Question: | Is this screw good for Samsung 82” TV |
Answer: | Yes - I ordered these to mount my 82” Samsung Q70 TV, they worked perfectly |
Product description
PERLESMITH M8x45mm TV Mounting Bolts with 25mm Long Spacers for Samsung TCL LG Insignia Vizio Sony Sharp Panasonic Hisense Haier Toshiba Element and more
Package includes:
4x M8x45mm screws
4x 2mm washers
4x 10mm spacers
4x 15mm spacers
Multiple combinations:
M8x43mm=M8x45+2mm
M8x35mm=M8x45+10mm
M8x30mm=M8x45+15mm
M8x20mm=M8x45+25mm
M8x33mm=M8x45+2mm+10mm
M8x28mm=M8x45+2mm+15mm
M8x18mm=M8x45+2mm+25mm
These screws bolts kit had been tested to fit the below model: MU8000, 50" NU6900, NU7100, NU7200, 65" KS8000, 65" UN65MU8000, UN49MU8000, UN75NU8000, UN65NU6900F, 65" KS8500 flat version, RU8000 curved version and more.
Your model has not been listed? Take a look at the TV manual about the TV Mount bracket and it will tell you what size needed to hang it ;)
- Wide Compatibility: TV mounting hardware kit Works With Samsung LG Vizio Philips Sony Bravia Sharps TVs and TV wall mount bracket
- Flexible Spacer Length: Come with 5mm spacers and 10mm spacers so you can combine them with screws to meet your needs
- Easy To Use: Easy install with Phillips head screwdriver and hold your Samsung TV securely and suitably
- High Quality TV Bolts: M8 TV screws constructed of solid steel and we refine and purify each screw for your DIY home project
- US-based Caring Customer Service: We are ready to provide the awesome TV wall mount screws at a great value and glad to answer your pre-purchase and installation questions 7 days a week to help you out
User questions & answers
Question: | Does this kit work on Samsung tv 50” model # UN50nu6900fxza |
Answer: | Yes, our screw parcel can fit your TV. You could choose the suitable screws to mount your TV. And spacers and screws can be combined freely. If you have any other questions, please feel free to contact us:[email protected] |
Product description
Already have the wall mount but no screws for the back of your Samsung TV? Need a special M8 x 43mm length? We have the solution: A complete set of 4 TV mounting screws and washers to fit a Samsung TV requiring a 43mm length.
- For wall mounting Samsung TVs that require M8x43mm. Meets ASTM, ISO, ANSI and DIN specs
- Rated for TV mounting with zinc plating and coated with electrostatic discharge preventive.
User questions & answers
Question: | Will this work for a NU6080, 58” series |
Answer: | Compatibility with the mount is not the issue. You need to know a) the thread size for your tv and B) the length of the screw that won't damage your tv. All mounts pretty much use the same screw size, but if you try to install this screw in a tv that only takes a 30mm screw (length) without a spacer, you will damage your tv. This screw seems to be a 45 mm screw with a washer to shorten it to 43mm. This is a unique size for Samsung tv's that have a curved back. Hope that helps. |
Question: | Will thia work for 32inches tv |
Answer: | The millimeter number is the length of the screw So if the length is too long you could add washers The screws don't have to be the exact link but they have to be pretty close and you could use washers or spacers to make up for the extra space Now if there's screws aren't long enough then that's a different case then you'd have to buy different screws which are longer in length. |
Question: | Is this only compatible with a certain tv mount? and does it matter what size the tv is |
Answer: | Check with M1 to M9 or more size for Samsung because they different size on M1 or M2 or M4 or M8 etc Read the manual they give the size with them |
Question: | Will these fit model un58mu6100? Seems correct but the mm number throws me off |
Answer: | Yes, they should be the long ones, at least 1.5". |
Product description
The 4 screws are for attaching your Samsung TV to the wall mount
These wall mounting screws bolts work with Samsung 50" 55" 65" 75" 6, 7, 8 Series TV
These screws bolts had been tested to fit the below model: 55" NU8000, 55" NU6950 TV, 55" Q60R, 55"QLED Q6F, 65" Q80R, 65Q60FN, 75" UN75NU8000F, 75" Q70R, UN65KS9000, QN49Q60R, QN65Q80R,UN60J6200 etc.
Note: Take a look at the manual for you TV Mount bracket as well as on TV manual - it will tell you what size needed to hang it !
- 👍The 4 screws are for attaching your Samsung TV to the wall mount
- 👍Metric M8 machine screws with 1.25mm threaded pitch and 43mm threaded length (the included spacers put the bolt at the correct depth)
- 👍These wall mounting screws bolts work with Samsung 50" 55" 65" 75" 6, 7, 8 Series TV
- 👍These screws bolts had been tested to fit the below model: 55" NU8000, 55" NU6950 TV, 55" Q60R, 55"QLED Q6F, 65" Q80R, 65Q60FN, 75" UN75NU8000F, 75" Q70R, UN65KS9000, QN49Q60R, QN65Q80R,UN60J6200 etc.
- 👍Note: Take a look at the manual for you TV Mount bracket as well as on TV manual - it will tell you what size needed to hang it !
User questions & answers
Question: | What thread pitch is this M8 bolt |
Answer: | I'm not positive as I have the 55". It says it should in the description, so they probably do. See if you can download the user manual. It should tell you the length of the bolts needed. These are M8 x 43mm. |
Question: | Will these bolts work with a 55'' Samsung series 6 tv |
Answer: | Problem I found hanging my Samsung was the screw heads were too small forcing you to use the provided washers. When using the provided washers the screws became too short. The screws only would engage a max of 2 turns. Rule of thumb for thread engagement is a minimum of 3 turns. |
Question: | Will these fit Samsung 7series 65inch |
Answer: | Depends on your mounting hardware. Checking your owners manual. I don’t see why it wouldn’t. |
Question: | Will these fit un55ru8000fxza |
Answer: | They fit the built in threaded holes in the center of the back of the tv. You could go to local hardware store and get M8 screws in the length your non-tip kit requires. |
Product description
Already have the wall mount but no screws for the back of your TV? Need a special M8 extra long bolts? We have the solution: A complete set of 4 TV mounting screws, washers and spacers to fit you TV.
- Extra Long M8x45mm TV Mounting Bolts with multiple length Spacers for Samsung TVs.
- Fits 41 inch or larger Samsung TVs, and also suitable for LG, Vizio, Philips, Sony, Bravia, Sharp, etc.
- Easy installation with Phillips head screwdriver
- Includes washers and Precision Spacers made from high quality ABS. 5mm and 10mm lengths.
User questions & answers
Question: | Are these the screws for the bottom part of the stand |
Answer: | This screw is for the TV wall mount. It is used to connect the screw between the TV set and the TV wall mount. |
Question: | Will this work for q80t |
Answer: | Works on every Samsung I’ve used last one I used is on my 8000 series tv |
Question: | Is the pitch |
Answer: | YES |
Question: | Is this set of four |
Answer: | Yes, There are 4 screws and 4 washers in this package. |
Product description
Size:M8*45mm&M8*25mm(4pcs)
TV Wall Bracket Mount Screws
This packet contains:
Plastic 2.5mm spacers(4pcs).
Stainless steel 8.5mm washers(4pcs)
Phillips Head M8 x 45mm long bolts(8pcs)
Phillips Head M8 x 25mm long bolts(8pcs)
Customer First, Quality First
Customer first and quality first are our business principle. Our US-Based customer support are always ready to help. If you have any concerns before you purchase or any installation problems, you can feel free to contact us. 10 years Guaranteed!
- ✅TV Bolts: Our TV mounting bolts screws hold your Samsung TV securely and suitably
- ✅What's in the package: Our pack includes M8*45mm and M8*25mm TV screws, 2.5mm spacers、8.5mm washer.
- ✅Warm tips: Please check the manual for your TV brackets and your TV manual, you will know that you should choose what’s TV bolts before order.
- ✅Easy install with Phillips head screwdriver.
- ✅Customer Service: If you any question you can contact us and we will offer friendly US-Based customer service to provide you support before or after purchase.
User questions & answers
Question: | good afternoon |
Answer: | Dear Mila, Thanks for the interest and contacting our USX MOUNT Products. We are always here and glad to help. This model XAS701, there included 2 kinds of screws with different length as following: M8*25mm, M8*45mm. But the screw for Samsung stand is M4*L14, not the standard screw. So it doesn't fit your TV stand. If you run into this kind of similar case in future , please feel free to contact our customer service via email: [email protected] or call our toll free number 800-460-0956 first, we will be happy to help you solve your problem. Yours Sincerely USX MOUNT Service Team |
Question: | Mounting samsung 49 " q80t tv on existing 200 x 200 vesa. manual states m8 screw mm is 26-28. that size cannot be found anywhere. will these work |
Answer: | Dear Tori, Thanks for the interest and contacting our USX MOUNT Products. We are always here and glad to help. This model XAS701 can meet your requirement, pls take M8*25mm and add1.0 mm washer or 2.5mm spacer to reach 26-28mm length. If you still have concerns, you can contact us via [email protected] or call the Toll Free Number: 800-460-0956 for us to double check. Wish you a great shopping experience! Thank you! Best regards, USX MOUNT Service Team |
Question: | What is the thread pitch on these M8 bolts? Is it 1.00mm or 1.25mm |
Answer: | Dear Amazon Customer, Thanks for the interest and contacting our USX MOUNT Products. We are always here and glad to help. Kindly pls note the thread pitch is 1.25mm. Wish you a great shopping experience! Thank you! Best regards, USX MOUNT Service Team |
Question: | Do these screws fit a samsung tu8000 43 inch wall mount tv |
Answer: | Dear Vicki, Thank you for the interest and contacting us regarding USX MOUNT. We are glad to help. We have searched Samsung 43"Samsung TU8000 wall mount TV ,the manual shows that the screw size required to install your TV on the wall mount is M8X(20-22)mm. We include screws in our hardware bag, the screws specifications are: (4pcs) M8x25mm、(4pcs) M8x45mm (8pcs) M8 2.5mm spacers、(8pcs) M8 washers For your TV need M8*20-22mm screws, here below are our suggestions for you: 1.If the needed screws size is M8*20mm, please use our provided M8*25mm screw+2pcs*2.5mm spacer. 2.If the needed screws size is M8*22mm, you could use our provided M8*25mm screw+1pcs*2.5mm spacer+1pcs*M8 washer. If you still have any other questions, just feel free to contact us with [email protected] or call our toll free number 800-460-0956. Best regards, USX MOUNT Service Team. |
Latest Reviews
View all
Enhancement Pills
- Updated: 26.03.2023
- Read reviews

Terry Kitchens
- Updated: 04.01.2023
- Read reviews

Hanky Panky Panties
- Updated: 23.04.2023
- Read reviews

Unknown Offset Umbrellas
- Updated: 03.03.2023
- Read reviews

Capos
- Updated: 14.07.2023
- Read reviews