10 best pyle vintage tube preamps
Pyle is a brand that offers a range of vintage tube preamps, which are commonly used in the realm of home theater systems, television, and video electronics. These vintage tube preamps are designed to enhance and refine audio signals in various audio-visual setups, delivering a warm and classic tube-driven sound that is highly sought after by audiophiles and enthusiasts.
Key features and aspects of Pyle vintage tube preamps include:
Tube Technology: Vintage tube preamps from Pyle typically feature vacuum tubes (also known as valves) in their signal processing circuits. These tubes are known for their ability to produce a unique, warm, and rich sound signature that many audiophiles appreciate.
Audio Enhancement: These preamps are designed to improve audio quality by enhancing the clarity, depth, and overall soundstage.They can be used to amplify and fine-tune audio signals from sources like turntables, CD players, and other audio equipment.
Versatile Connectivity: Pyle vintage tube preamps often come equipped with a variety of input and output options, including RCA, AUX, and microphone inputs, allowing users to connect multiple audio sources and tailor the sound to their preferences.
Tone Control: Many Pyle tube preamps provide tone control features, such as bass, treble, and balance adjustments, which enable users to customize the audio output to suit their specific preferences and room acoustics.
Classic Design: These preamps often feature a retro or vintage design aesthetic that appeals to those who appreciate classic audio equipment aesthetics. The combination of modern technology with a vintage look can be a selling point for many consumers.
Compatibility: Pyle vintage tube preamps can be integrated into various home theater systems, including setups involving televisions, video players, and other audio-visual equipment. They can be a valuable addition to create a more immersive and high-fidelity audio experience.
When considering a Pyle vintage tube preamp for your audio setup, it's essential to ensure compatibility with your existing equipment and to review the specific features and specifications of the model you're interested in to meet your audio enhancement needs. Overall, these preamps are known for their ability to add a touch of nostalgia and audio warmth to modern home theater and audio systems.
Below you can find our editor's choice of the best pyle vintage tube preamps on the market
Pyle Phono Turntable Preamp - Mini Electronic Audio Stereo Phonograph Preamplifier with RCA Input, RCA Output & Low Noise Operation Powered by 12 Volt DC Adapter (PP444)
Pyle
Product description
This electronic preamplifier stands up to the test and will provide you with serious sound performance. The PP444 is perfect for bringing your studio equipment's phono-level output to a more suitable line-level output. It'll take your audio signal, amplify its strength and prepare it for further processing by your receiver or amplifier. Preamps technically provide voltage gain to your desired equipment and are key to assisting the signal source, whether it's a turntable, musical instrument or microphone. The ultra-low noise audio conditioning circuitry allows the preamp to boost audio to levels that are more manageable for various types of audio equipment. You'll find it easier to adjust the recording level volumes of different sources from microphones and instruments alike. You should position your preamp close to the source to reduce unwanted noise and interference. Preamps can sometimes come built into the stereo equipment, but if that's not the case, the PP444 is an easy install, wise choice and great addition to any musician or producer. Take your sounds and audio production skills to the next level with the PP444 Preamplifier. Features: Converts Phono Signals to Line Level Signals State-of-the-Art Circuitry Accommodates Magnetic Pickups Ultra-Low Noise Operation Improves Sound Performance Connects to Turntables and Other Studio Equipment Input Sensitivity: 3mV at 50K Ohms (Phono) Dedicated RCA and 1/4" Output Connectors Output: 2V max (P-P) at 10K Ohms DC 12-Volt Power Adapter Included Frequency Response: 20 Hz ~ 20 KHz ±2dB S/N Ratio (A-WTD): 70 dB - Output Level: 2V THD: 0.08% @ 1KHz and 3mV Input | S/N Ratio: 70dB Input Sensitivity/Impedance/Phono 3 mV/50K Ohms Load Impedance: 10K Ohms - Reference Voltage: 1V d Dimensions (W x H x D): 3.54" x 2.13" x 1.02" Sold as: Unit Weight: 0.85 lbs.
From the Manufacturer
& |  |  |  |  |  |
| PP444 | PP555 | PP999 | PHE300 | PHE400 | |
|---|---|---|---|---|---|
| Turntable / Phono Pre-Amplifiers | Noise / Hum Eliminators | ||||
| Jacks | RCA & 1/4'' | RCA & 1/4'' | RCA | 1/4'' TRS | 1/4'' TRS & XLR |
| 12V DC Adaptor | ✔ | ✔ | ✔ | ||
- CONVERTS PHONO SIGNALS: A turntable preamp that converts phono signals to Line Level Signals This state-of-the-art circuitry phono preamp can accommodate magnetic pickups with an input sensitivity of 3mV at 50K Ohms
- LOW NOISE OPERATION: Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers The output is 2V max (P-P) at 10K Ohms It’s better to position the preamp close to the source to reduce unwanted noise and interference
- CONNECTS TO TURNTABLES: Connect any turntable to modern sound equipment without specialized phono input for amplifying music For the receiver, this can be connected to speakers, computers, laptops and more
- SIMPLE PLUG & PLAY: This mini preamp has stereo RCA inputs and stereo RCA outputs Connect the turntable to the RCA inputs and ground Then, connect the amplifier receiver to the RCA outputs
- 1 YEAR WARRANTY: We guarantee this electric phono preamplifier with both a 30 day no hassle money back return policy and a 1 year manufacturer’s guarantee
User questions & answers
| Question: | Does this thing have an/off switch or do you need to plug/unplug everytime you use it |
| Answer: | no switch. You can plug/unplug, I leave it plugged in all the time. |
| Question: | Unit works fine for awhile and then starts outputting static, even with no input connected. I've tried it with several amps with the same results |
| Answer: | Most likely people who are having noise problems it is because of ground loop isolation problem. If you have a ground loop isolation problem grounding the preamp box is unlikely to help. Without getting technical, what you want to buy is a ground loop isolator or a humm eliminator; both the ground loop isolator and humm eliminator tackles the cause of the noise at the fundamental source of the problem, depending on your audio setup, one maybe easier to use than the other. To use the ground loop isolator or the humm eliminator they generally come with instructions, or you can google this topic. If the noise in your audio system isn't fixed by using this solution the first time, try putting the ground loop isolator and humm eliminator at various points in your audio system. Also you can talk to audio people and get advice about how to fix ground loop problems from people who setup big audio systems, for concerts and such; if you talk to the average electronic garage shop audio enthusiast you are likely to get bad advice, i.e., meaningless explanations. Also caution must be used when Googling this topic, much of the discussion, advice and explanation on this topic is bogus, you can get a general correct feel of this topic if you read a number of explanations. Also one more thing that can cause a "popping noise" is that you have too much gain, this is a phono amp and the gain is huge, it takes a 3mV and makes it 2Vp-p this is a gain of around 100 to 200, if you gain up the audio signal too much then the signal out of your amplifier runs out of head room and clips, this can cause a popping sound, essentially you have too much gain. If this is occurring you need to either buy a preamp with less gain or attenuate the signal before it gets to the preamp. If this is a problem, too much gain, you can buy preamps with gain control. |
| Question: | My turntable has very quiet output. Will this device help boost the volume |
| Answer: | Yes, indeed. If your need was like mine (no built-in pre-amp on the turntable and no specifically dedicated phono input on your amplifier) you will find this unit to be the perfect solution to needed amplification of the turntable's output. Don't forget to hook up the ground wire as directed or you may wind up putting unwanted noise into the audio. |
| Question: | My amp DOES have a Phono Input, but my cartridges are low output. Can I use this to boost the signal using the Phono Input to reduce audible hiss |
| Answer: | No, you can't. This is a phono preamp with RIAA playback equalization that amplifies the signal about 100 times, so it essentially does what your built-in phono preamp does. The output signal from the separate preamp is equalized to a nominally "flat" frequency response and the amplified signal level will overload and probably damage your built-in phono preamp. Plug it into any other stereo line input on your system (AUX, CD, DVD, TAPE, VCR, etc.), but NOT the PHONO input! If you need higher signal gain, maybe look at phono preamps from ART or TCC that have output level controls. If you use moving-coil (MC) cartridges, you need a preamp specifically designed for them...they require at least 55 dB (over 500 times) signal gain vs. about 40 dB (100 times) for moving-magnet (MM) cartridges. Noise becomes a critical issue with MC cartridges because of their extremely low signal output, so good-quality cables and good turntable grounding are essential. |
Product features
Pyle Phono Turntable Preamp Mini Electronic Audio Stereo Phonograph Preamplifier with RCA Input, RCA Output & Low Noise Operation Powered by 12 Volt DC Adapter
- Converts Phono Signals to Line Level Signals
- State-of-the-Art Circuitry Accommodates Magnetic Pickups
- Ultra-Low Noise Operation Improves Sound Performance
- Connects to Turntables and Other Studio Equipment
- Input Sensitivity: 3mV at 50K Ohms (Phono)
- Dedicated RCA and 1/4'' Output Connectors
- Output: 2V max (P-P) at 10K Ohms
- DC 12-Volt Power Adapter Included
- Frequency Response: 20 Hz ~ 20 KHz ±2dB
- S/N Ratio (A-WTD): 70 dB - Output Level: 2V
- Input Sensitivity/Impedance/Phono 3 mV / 50K Ohms
- Load Impedance: 10K Ohms - Reference Voltage: 1V d
- Dimensions (W x H x D): 3.54" x 2.13" x 1.02"
Pyle Phono Turntable Preamp - Mini Electronic Audio Stereo Phonograph Preamplifier with 9V Battery Compartment, Separate DC 12V Power Adapter, RCA Input, RCA Output & Low Noise Operation (PP555) BLACK
Pyle
Product description
PylePro Model : PP555
Phono Turntable Pre-Amplifier
Ultra Compact Phono Turntable Pre-Amplifier w/ 9V Battery Compartment
Features:What's in the Box:
Technical Specs:
This electronic preamplifier stands up to the test and will provide you with serious sound performance. The PP555 is perfect for bringing your studio equipment's phono-level output to a more suitable line-level output. Compact preamp features include 9 Volt Battery Compartment, Dedicated RCA 1/4-Inch Output Connectors and power Adaptor. It'll take your audio signal, amplify its strength and prepare it for further processing by your studio equipment. Pre-amps technically provide voltage gain to your desired equipment and are key to assisting the signal source, whether it's a turntable, musical instrument or microphone. The ultra-low noise audio conditioning circuitry allows the pre-amp to boost audio to levels that are more manageable for various types of audio equipment. You'll find it easier to adjust the recording level volumes of different sources from microphones and instruments alike. You should position your preamp close to the source to reduce unwanted noise and interference. Pre-amps can sometimes come built into the stereo equipment, but if that's not the case, the PP555 is an easy install, wise choice and great addition to any musician or producer. Take your sounds and audio production skills to the next level with the PP555 Phono Turntable Preamplifier.
From the Manufacturer
& | | | | | |
| PP444 | PP555 | PP999 | PHE300 | PHE400 | |
|---|---|---|---|---|---|
| Turntable / Phono Pre-Amplifiers | Noise / Hum Eliminators | ||||
| Jacks | RCA & 1/4'' | RCA & 1/4'' | RCA | 1/4'' TRS | 1/4'' TRS & XLR |
| 12V DC Adaptor | ✔ | ✔ | ✔ | ||
- CONVERTS PHONO SIGNALS: A turntable preamp that converts phono signals to Line Level Signals. This state-of-the-art circuitry phono preamp can accommodate magnetic pickups with an input sensitivity of 3mV at 50K Ohms.
- LOW NOISE OPERATION: Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers. The output is 2V max (P-P) at 10K Ohms. It’s better to position the preamp close to the source to reduce unwanted noise and interference.
- CONNECTS TO TURNTABLES: Connect any turntable to modern sound equipment without specialized phono input for amplifying music. For the receiver, this can be connected to speakers, computers, laptops and more.
- SIMPLE PLUG & PLAY: This mini preamp has stereo RCA inputs and stereo RCA outputs. Connect the turntable to the RCA inputs and ground. Then, connect the amplifier receiver to the RCA outputs. Can also be powered with 9V battery.
User questions & answers
| Question: | Can I use this preamp on a Numark pt1 scratch turntable |
| Answer: | Yes you can,but this device is cheap as crap. It didn’t work fresh out the box.It only worked with the 9v battery.The DC plug input had like a shortage or something.I had seen all the 1 star reviews but I tried my luck and yeah, no luck at all. |
| Question: | would the preamp work with a shure c608 microphone or the impedance is to much off. 2.what is the current draw?. 3 how long the battery lasts |
| Answer: | You need to purchase a preamp that is designed for the input that you are using. Microphone inputs and phono inputs are not the same. Behringer designs different preamps for each of those functions. Check them out. |
| Question: | I have a turntable with RCA jacks out, then Logitech speakers with a converter from a headphone-type jack to RCA jacks. Do I just need a preamp |
| Answer: | Yes. You can hook the turntable's RCA jacks to the speaker RCA jacks and get audio. However, if it's an older turntable it may not be grounded, and you will hear a humming sound. Also, your audio will be very low in volume. The pre-amp will eliminate the humming sound, and give you the volume you desire. |
| Question: | I have an Audio Technica AT-LP60 and Lepai LP-2020A+ Tripath TA2020 Class-T Hi-Fi Audio Amplifier with Power Supply, would I still need a preamp |
| Answer: | I have the Bluetooth model so your internal pre-amp may or may not be different but I route my turntable through a midi device with onboard sampling and the built in preamp is not enough to boost the signal to useable levels. You can test yours out but I know I need a preamp. |
Pyle 3 Piece Professional Dynamic Microphone Kit Cardioid Unidirectional Vocal Handheld MIC with Hard Carry Case & Bag, Holder/Clip & 26ft XLR Audio Cable to 1/4'' Audio Connection (PDMICKT34)
Pyle
Product description
The Pyle Professional Dynamic Microphone kit provides reliable studio & stage-tested performance. The uni-directional moving coil handheld mic features an ultra-wide frequency response range which makes it perfect for vocals. It delivers excellent sound pickup whether recording in the studio or performing on stage. Additional features include built-in acoustic pop-filter, high signal audio output, rugged construction with steel mesh grill, ON/OFF switch for stage control, along with an included XLR connection cable. Enjoy reliable sound performance with the Pyle PDMICKT34 Professional Dynamic Microphone.
Features:
- Includes Handheld Microphones & XLR Audio Cables
- Built-in Acoustic Pop Filters
- Ultra-Wide Frequency Response
- High Signal Output for Vocals & Singing
- Rugged Construction & Steel Mesh Grill
- Reinforced Sound Cartridge
- ON/OFF Switch for Stage Control
- Perfect for Stage Performances or In-Studio Use
Technical Specs:
- Mic Element: Hyper-Cardioid
- Pickup Pattern: Unidirectional Moving Coil
- Mic Construction Material: Zinc Alloy
- Audio Cable Connectors: XLR to 1/4’’
- XLR Cable Length: 26’+ Ft.
- Open Circuit Sensitivity: -54 dB
- Frequency Response: 60Hz-15kHz
- Output Impedance: 600 Ohm, +/-3dB (0dB=1V/Pa @ 1kHz)
- Mic Dimensions (L x W): 6.7’’ x 1.8’’ (-Each)
- Mic Weight: 0.61 lbs. (-Each)
- Sold as: Kit
- Weight: 7.23 lbs.
—— SATISFACTION GUARANTEED ——
Your satisfaction is our #1 priority.
If this item fails to meet your expectations we will accept it back a full refund within the first 30 days.
We also stand behind this product with a limited 1-Year manufacturer warranty.
Contact us if the item should show any defect within the first year we will help exchange it for a new one.
- UNIDIRECTIONAL - Cardioid pickup pattern captures source signal such as guitar amplifier or vocalist, while shunning off-axis sound minimizing background noise & feedback reproducing audio without interference from instruments or speakers on stage.
- DYNAMIC - For optimal clarity and punch, robust & resistant to moisture, achieving high gain before feedback, makes this microphone ideal for live vocal applications and for recording amplified instruments.
- ULTRA-WIDE FREQUENCY RESPONSE - for brilliant and transparent sound with integrated pop filter and windscreen to minimize breath and pop noises you can count on it to come through after countless gigs and studio applications.
- TRAVEL CASE & ACCESSORIES - Beautiful hard travel case & storage bag for microphone clip holders & professional grade 26+ft. XLR-to-1/4 cables supplied, perfect for professional studios & on-stage vocal performances all over the globe.
- HIGH QUALITY - Rugged, all-metal construction for maximum reliability featuring a zinc die-cast case and steel mesh windscreen with anti-dent ring. A perfect all-purpose, versatile stage and recording microphone.
User questions & answers
| Question: | Would this give decent sound to my vox in my metal band |
| Answer: | Off course, the sound quality you'll get It's gonna be impressive and professional!! |
| Question: | Can I use a 3. 5mm Stereo Plug (male) to 6. 35mm (1/4 Inch) Stereo Jack (female) adapter. to connect to my machine |
| Answer: | Yes as long as the adapter is trs |
| Question: | How long are the cables |
| Answer: | The cables are each 25 ft. long and are a very nice quality. All three mics and three cables come in a hard case inside of a soft case with a shoulder strap. All the mics have on off switches and are also of good quality. |
| Question: | do you have to have the audio connection or can you go anywhere in the room without it being connected |
| Answer: | It’s not cordless , you need to be connected |
Product features
3 PIECE PROFESSIONAL DYNAMIC MICROPHONE KIT
Provides reliable studio & stage-tested performance. The uni-directional moving coil handheld mic features an ultra-wide frequency response range which makes it perfect for vocals. It delivers excellent sound pickup whether recording in the studio or performing on stage. Additional features include built-in acoustic pop-filter, high signal audio output, rugged construction with steel mesh grill, ON/OFF switch for stage control, along with an included XLR connection cable.
HIGH FREQUENCY RESPONSE
Podcasting Lab Tested for Stage & Studio-Quality Performance, Crisp Vocal Pickup, High-Precision Audio Clarity.
PRO AUDIO RECORDING
Used for Podcasts, Gaming, Streaming, Recording, Audio Editing.
PERFECT FOR STAGE
The best thing since the performance itself is this kit. This model is mostly used for presentations, studio recording and announcements.
BUILT-IN ACOUSTIC POP FILTERS
Keeping the noise protected from moving air, instrument impact and moisture are a couple highlights why pop filters are extremely useful and needed.
TRAVEL CASE & ACCESSORIES
Beautiful hard travel case & storage bag for microphone clip holders & professional grade 26+ft. XLR-to-1/4 cables supplied
DIMENSIONS
This Microphone set has a 6.7 inches Length and 1.8 inches Width Each
Pyle Rack Mount Studio Pre-Amplifier - Audio Receiver System w/Digital LCD Display Bluetooth FM Radio Recording Mode Remote Control USB Flash or SD Card Reader Input and Output Jack - PPRE70BT
Pyle
Product description
Pro Audio Bluetooth Pre-amplifier Receiver System - Digital Rack Mount Studio Preamp, Recording Mode, FM Radio
Features:
• Rack Mount pre-amplifier Sound Receiver System
• Bluetooth Wireless Audio Streaming Ability
• Unique Recording Mode Saves Audio via USB/SD Port
• USB Flash & SD Memory Card Readers
• Aux (3.5mm) Input Jack
• Connect & Stream Audio from External Devices
• FM Radio with Digital LCD Display
• ID3 Tag Readout Displays Song Title
• Multi-Source RCA (L/R) Audio Input Connectors
• RCA (L/R) Audio Output Connectors
• Combo 1/4’’ / XLR Combo/Microphone Input Jack
• XLR Audio Output Jacks
• Front Panel Button Control Center
• Independent Input Source Selectable
• Bass, Treble, Mid, Balance, Master Volume Adjustable
• Headphone Jack, 3.5mm
Bluetooth Connectivity:
• Built-in Wireless Music Streaming Receiver
• Compatible with All of Your Favorite Bluetooth Devices
• (iPhone, Androids, Smartphones, iPad, Tablets, etc.)
• Bluetooth Version: 2.1
• Bluetooth Network Name: BT
• Wireless Range: 25’+ ft.
What's in the Box:
• Remote Control
• FM Antenna
• Detachable Hardware Rack Mounts
• Power Cable
Technical Specs:
• Rated Power input: 7W
• Input currency: 30mA
• Max power consumption: 15W
• Construction Material: Metal, Aluminum Alloy Panel
• Frequency response: 20-20KHz, +/-2dB
• S/N Ratio: >85dB
• T.H.D.: <1.0%
• Input sensitivity: 200mV (Max Output: 6000mV)
• Battery Operated Remote Control, Requires x ‘CR-2032’ Battery (Included)
• Maximum USB Flash & SD Memory Card Support Size: 32GB
• Digital Media File Support: MP3, WAV
• Power Cable Length: 4.5’ ft.
• Power: 120/240V, Switchable
• Dimensions (L x W x H): 19.0’’ x 4.7’’ x 1.7’’ -inches
• Sold as: 1
• Weight: 4.61 lbs.
- RACK MOUNT COMPATIBLE: Pyle pro audio pre-amplifier has FM radio tuning and unique recording mode that saves audio via USB/SD port. Also, pack with detachable hardware rack mounts for quick and easy assembly
- 2. 1 BLUETOOTH VERSION: Built-in Bluetooth for wireless music streaming receiver that ranges up to 25’+ ft with digital LCD display. It works with all of today’s latest devices such as iPhone, android, smartphone, iPad, tablets, computer and the likes
- AUX INPUT AND OUTPUT: This receiver/preamp also features two sets of RCA inputs, RCA preamp out, 2 Mono RCA's for subwoofer output, and Bluetooth that wirelessly connects to your iPod and MP3 player. Also, an FM antenna for better signal reception
- FRONT CONTROL CENTER: The front panel button control center consists of a power switch, independent input source selectable, bass, treble, mid, balance and master volume adjustment. Also, pack with headphone jack, USB flash and SD memory card readers
- REMOTE CONTROL: A simple and user-friendly remote control is included with the PPRE70BT, providing all the functionality you need from switching input sources. And, it will allow you to access all functions of the receiver quickly and efficiently
User questions & answers
| Question: | How many watts is this amplifier |
| Answer: | This is not an amplifier, it is a pre-amplifier which means that you need a separate amplifier in order to drive speakers. |
| Question: | The description says two (02) mono rca outputs for subwoofers. where are they |
| Answer: | You're right that the description says that there are 2 mono outputs for subwoofers but I think that is an error. The picture that there is of the back of the unit is correct, as is the labeling that accompanies the picture. |
| Question: | can you use rca in and bluetooth out |
| Answer: | No. The Bluetooth feature is only for receiving from a Bluetooth device as a source. |
| Question: | Can someone confirm that the remote control can in fact control the master volume on the preamp unit |
| Answer: | Neither of the other two answers are correct! Here’s the deal. This device has an analog knob with aux 1, aux 2, aux 3, and another multi-function input that includes the radio, bluetooth, and the media card stuff. The volume only works on some of the inputs. Bluetooth, radio, and the media card are routed through the digital, remote controllable volume control. The switch between Aux 1, aux 2, aux 3, and the multi-function input is routed through the master analog volume control, which is controlled by an analog knob that is not remote controllable. I had hoped that this device would offer remote control of the analog RCA inputs, but it does not. |
Product features
Pyle Pro Rack Mount Studio Pre-Amplifier
Pyle's Stereo is the perfect solution for all of your audio needs. Using the latest sound amplification technology, this is designed to deliver crisp stereo sounds from a wide range of connected music sources. This pro digital rack-mount preamplifier features FM radio and Bluetooth connectivity. Unique recording mode that saves audio via USB/SD Port.
About Pyle
Pyle has been in business for over 35 years, and their manufacturing experience and expertise is easy to see - and hear.
Pyle Phono Turntable Preamp - Mini Electronic Audio Stereo Phonograph Preamplifier with RCA Input, RCA Output & Low Noise Operation Powered by 12 Volt DC Adapter - PP999
Pyle
Product description
PylePro Model : PP999
Compact Ultra-Low Noise Phono Turntable
Compact Ultra-Low Noise Phono Turntable Preamp with 12-Volt Adaptor - Preamplifier
This electronic preamplifier stands up to the test and will provide you with serious sound performance. The PP999 is perfect for bringing your studio equipment's phono-level output to a more suitable and manageable line-level output. It'll take your audio signal, amplify its strength and prepare it for further processing by your receiver or amplifier. Preamps technically provide voltage gain to your desired equipment and are key to assisting the signal source. The ultra-low noise audio conditioning circuitry allows the preamp to boost audio to levels that are more manageable for various types of audio equipment. You'll find it easier to adjust the recording level volumes of different sources and instruments alike. You should position your preamp close to the source to reduce unwanted noise and interference. Preamps can sometimes come built into the stereo equipment, but if that's not the case, the PP999 is an easy install, wise choice and great addition to any musician or producer. Take your sounds and audio production skills to the next level with the PP999 Preamplifier.
From the Manufacturer
& | | | | | |
| PP444 | PP555 | PP999 | PHE300 | PHE400 | |
|---|---|---|---|---|---|
| Turntable / Phono Pre-Amplifiers | Noise / Hum Eliminators | ||||
| Jacks | RCA & 1/4'' | RCA & 1/4'' | RCA | 1/4'' TRS | 1/4'' TRS & XLR |
| 12V DC Adaptor | ✔ | ✔ | ✔ | ||
- CONVERTS PHONO SIGNALS: A turntable preamp that converts phono signals to Line Level Signals. This state-of-the-art circuitry phono preamp can accommodate magnetic pickups with an input sensitivity of 3mV at 50K Ohms
- LOW NOISE OPERATION: Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers. The output is 2V max (P-P) at 10K Ohms. It’s better to position the preamp close to the source to reduce unwanted noise and interference
- CONNECTS TO TURNTABLES: Connect any turntable to modern sound equipment without specialized phono input for amplifying music. For the receiver, this can be connected to speakers, computers, laptops and more
- SIMPLE PLUG & PLAY: This mini preamp has stereo RCA inputs and stereo RCA outputs. Connect the turntable to the RCA inputs and ground. Then, connect the amplifier receiver to the RCA outputs
User questions & answers
| Question: | If I have a record player without a Preamp, will this help me with hooking it up to a Sonos |
| Answer: | You can hook it up to anything with a red and white connection. Or if you get the rca to 3.5mm jack then you can hook it up to anything with an input slot. I used this on my realistic lab 440 which doesn't have a preamp. Once I connected the ground from my turntable into the ground slot on this amp, my music sounded loud and clear. |
| Question: | mp |
| Answer: | Turntables (with typical magnetic cartridges) have very low signal output (a few thousandths of a volt). Records have the bass reduced to provide enough room on the surface for the recorded grooves, and the treble boosted to reduce the surface noise level when played back. A phono preamplifier performs two jobs: - It boosts the small signal from the turntable by about 50 to 100 times (producing a "line level" signal) so it can be used by typical receivers or amplifiers.- It also boosts the bass and reduces the treble according to an industry standard (the RIAA equalization curve) to restore the signal from the record to its original frequency response.The Pyle PP999 is just an inexpensive phono preamp, nothing special. Phono preamps can range from $20 on up to whatever you're willing to pay for ultra-high quality. Some manufacturers make "USB" phono preamps that have A/D (analog-to-digital) converters built in and connect to a computer's USB port. Most of these provide "CD quality" conversion (16-bits at 44kHz or 48kHz). These may be adequate for digitizing your vinyl, but many computer sound systems can provide up to 24-bit, 192 kHz conversion depending on the software you use (much higher quality), by connecting the preamp output to the computer's line input. Don't just convert directly to MP3 files...you'll lose too much detail compared to the original vinyl sound. It takes almost no time to make an MP3 copy of a high bit-rate WAV or FLAC (lossless) file, but it'll take you an hour to make ANY digital copy of an LP, so do it the best you can the first time! |
| Question: | So this is a stupid question, I plug my RCA wires coming from my turntable into the Amp. But where do I plug the speaker wires into on the Amp |
| Answer: | TurnTable==>PreAmp==>Receiver/Amplifier==>SpeakersThe 'Pyle PP999' is the "Preamp". The Turntable is plugged into the PP999 INPUT and the PP999 OUTPUT plugs directly into any (non Phono) INPUT on the receiver. Your Receiver allows you to switch between different music-sources, contains the primary-amplifier and distributes the final sound out to the speakers(and subwoofer). The Receiver should have multiple inputs for receiving signals from eg. CD, Tape, VCR, etc. In my experience those labels are for convenience and interchangeable with the exception of a "Phono" input. NOTE: If the receiver has a "Phono" input then there's a built-in preamp. If your using an external preamp (Pyle PP999) do NOT plug it into the Receiver's 'Phono' input, it could cause damage. I plug the preamp for the turntable into the Receiver's 'VCR' or 'TV' inputs. |
| Question: | I have the Pyle turntable and Pyle stereo but they don't work together--VERY low sound--so is this the missing piece |
| Answer: | Turntables (with typical magnetic cartridges) have very low signal output (a few thousandths of a volt). Records have the bass reduced to provide enough room on the surface for the recorded grooves, and the treble boosted to reduce the surface noise level when played back. Most modern receivers DO NOT have the right inputs to deal with this signal (no "phono" input). A phono preamplifier performs two jobs: - It boosts the small signal from the turntable by about 50 to 100 times (producing a "line level" signal) so it can be used by typical receivers or amplifiers.- It also boosts the bass and reduces the treble according to an industry standard (the RIAA equalization curve) to restore the signal from the record to its original frequency response.The Pyle PP999 is just an inexpensive phono preamp, nothing special. Phono preamps can range from $20 on up to whatever you're willing to pay for ultra-high quality. Some manufacturers make "USB" phono preamps that have A/D (analog-to-digital) converters built in and connect to a computer's USB port. Most of these provide "CD quality" conversion (16-bits at 44kHz or 48kHz). These may be adequate for digitizing your vinyl, but many computer sound systems can provide up to 24-bit, 192 kHz conversion depending on the software you use (much higher quality), by connecting the preamp output to the computer's line input. Don't just convert directly to MP3 files...you'll lose too much detail compared to the original vinyl sound. It takes almost no time to make an MP3 copy of a WAV or FLAC (lossless) file, but it'll take you an hour to make ANY digital copy of an LP, so do it the best you can the first time! |
Home Audio Power Amplifier System 2X40W Mini Dual Channel Sound Stereo Receiver Box w/ LED For Amplified Speakers, CD Player, Theater via 3.5mm RCA for Studio, Home Use Pyle PCA2 Black
Pyle
Product description
PyleHome Model : PCA2
Stereo Power Amplifier, 2 x 40 Watt
Stereo Power Amplifier, Compact Audio Amp with RCA & Speaker Terminals (2 x 40 Watt)
Features:
- Compact and Powerful Mini Amp System
- RCA (L/R) Audio Input
- Connect to External Audio Devices
- PushType Speaker Terminals
- Front Panel Rotary Controls
- LED Indicator Light
- Power ON / OFF Switch
- Configurable Treble, Bass & Volume Adjustment
Technical Specs: - Power Output: 2 x 40 Watt MAX
- Frequency Response: 20Hz40kHz
- T.H.D.: 0.3%
- Input Sensitivity: 750mV
- SignaltoNoise Ratio: 75dB
- 10% RMS at 4Ohm Impedance
- Tone Controls: Bass & Treble: +/10dB (100Hz/10kHz)
- Power Fuse: 1.5 A, 250V FastActing (5 x 20mm)
- Power: 110/220V Voltage Selector, 50/60Hz
- Dimensions (W x H x D): 5.9'' x 2.9'' x 6.4'' inches
This mini stereo power amplifier provides up to 40 W of power on each channel at 4 ohms. Connect your inputs using the RCA jacks. Outputs over standard speaker push jacks. It's compatible with any audio or computer device you can even hook up an iPod using a 3.5mm to RCA jack converter. Treble, bass, and volume controls on the front let you tweak your sound to exactly how you want it. Runs on 110 or 220 V.
From the Manufacturer
- 2x40 WATT Power: The Pyle dual channel audio amplifier is perfect for your home theater acoustic sound system; Gives you 2x40 watts peak power which can be used for speakers w/ 4 8 ohms impedance, enjoy high quality music and movies
- Multiple Sources: This small personal portable digital amp box lets you connect external audio sources such as a tuner, CD DVD player, tape deck, camcorder, VCR to the RCA (L/R) line input and enjoy enhanced amplified acoustic audio reproduction
- Led Indicator: The mini professional Integrated stereo receiver features LED indicator light above the power switch to indicate power is turned ON; The unit also offers built in short circuit and power surge protection for safe usage
- Push type Speaker Terminal: It lets you easily connect speaker wires directly to the amplifier; The speaker impedance ranges from 4 to 8 Ohms for the general stereo output; The total speaker impedance must be at least 4 Ohm per channel at stereo mode
- EQ Controls: The improved indoor smart compact bookshelf speaker sound amplifier Ffatures crisp and responsive buttons for the power switch; It also features rotary knob controls for the master volume, bass, treble adjustments
Product features
Pyle Home 2X40-Watt Stereo Mini Power Amplifier
This mini stereo power amplifier provides up to 40 W of power on each channel at 4 ohms. It's compatible with any audio or computer device - you can even hook up an iPod using a 3.5mm to RCA jack converter. Connect your inputs using the RCA jacks. Outputs over standard speaker push jacks. Treble, bass, and volume controls on the front let you tweak your sound to exactly how you want it. Runs on 110 or 220 V.
Pyle Home 150-Watt Stereo Mini Power Amplifier
This mini stereo power amplifier provides up to 75 W of power on each channel at 4 ohms. It's compatible with any audio or computer device - you can even hook up an iPod using a 3.5mm to RCA jack converter. Connect your inputs using the RCA jacks. Outputs over standard speaker push jacks. Treble, bass, and volume controls on the front let you tweak your sound to exactly how you want it. Runs on 110 or 220 V.
Pyle Home 2x120 Watt Audio Speaker Power Amplifier
This home amplifier is perfect for powering any stereo system. Using sophisticated circuitry and premium components for uncompromising musicality. This product is famous for delivering powerful and accurate sound. Complete with 2 x 120 watts of power. This simple to use and durable amp has bass and treble controls, a slick blue LED output level display, L/R RCA inputs, and 4 speaker outputs. This small but powerful amp delivers clear and crisp audio for it listener. Durable and affordable, this amp is made to last.
Classic Retro Dynamic Vocal Microphone - Old Vintage Style Unidirectional Cardioid Mic with XLR Cable - Universal Stand Compatible - Live Performance In Studio Recording - Pyle PDMICR42SL (Silver)
Pyle
Product description
PylePro Model : PDMICR42SLClassic Retro Vintage Microphone, SilverClassic Retro Dynamic Vocal Microphone, Vintage Style Vocal Mic with 16' ft. XLR Cable (Silver) Features: Classic & Iconic 'Old School' StyleBuilt-in Acoustic Pop FilterUltra-Wide Frequency ResponseHigh Signal Output for Voice ClarityInternal Cartridge Shock MountSelf-Tensioning Swivel MountRugged Construction & Steel Mesh GrillIntegrated Low Noise CircuitryON/OFF Switch for Stage ControlIncludes 16' ft. XLR CableUniversal Compatibility: Built-in Mic Stand AdapterPerfect for Stage Performances, Karaoke, RecordingTechnical Specs: Mic Element/Type: DynamicPickup/Polar Pattern: Uni-directionalMic Housing Construction Material: Molded ABSFrequency Response: 30Hz-15kHzSensitivity: -50dB (3dB @ 1kHz) Output Impedance: 600 Ohm (15%)Construction Material: PlasticDimension: 2. 2'' x 3. 1'' x 7. 4''Achieve quality sound performance and style with Pyle’s Classic Retro Microphones. The PDMICR42 vintage series dynamic mics will provide you with that old-school flavor along with today’s latest audio reproduction technology. Apart from the iconic stage and studio-tested design, these classic mics feature dynamic moving coil elements, adjustable self-tensioning swivel mounts, cardiod polar patterns, impressive frequency response rates and more -- all to create an overall fantastic look and feel. The Pyle PDMICR42 Series Classic Retro and Vintage Microphones are sure to give you that sound and style you’ve been looking for.
- RETRO STYLE: Pyle Pro introduces a classic iconic retro style performance microphone and will surely add old fashioned elegance to on stage gig or in studio performances. Allows you to enjoy tomorrow’s sound performance w/ a classic and iconic touch
- BUILT IN POP FILTER: The professional classic dynamic vocal mica has a built in pop shield / screen that eliminate or reduce the popping sound caused by the mechanical impact of fast moving air giving you a more clear audio. Includes 16' ft. XLR cable
- VOICE CLARITY: The silver vintage microphone features a high signal output, integrated low noise circuitry, 30Hz-15kHz ultra wide frequency response, -50dB (3dB @ 1kHz) sensitivity, and 600 ohm output impedance to ensure a crystal clear audio
- UNIDIRECTIONAL: This unidirectional mica also features a cardioid heart shape pickup pattern that is most sensitive in the front and rejects sound from other direction making it perfect for live stage performances, karaoke, in studio recording
- ADJUSTABLE ANGLE: The built in universal mica stand adapter is compatible with almost all of today's mica stand in the market. It also has an internal cartridge shock and self tension swivel mount so you can fully adjust your mica forward or back
User questions & answers
| Question: | can it be handheld |
| Answer: | Yes it can. The only bad thing about this mic is it is made of plastic. But over all it sounds great. |
| Question: | IS this made of cheap plastic that will strip easily |
| Answer: | We actually used ours for a music video but the quality of the microphone was great! I didn't see it as cheap at all, and not plastic! |
| Question: | What stand should i use or does it come with one |
| Answer: | It doesn't come with a stand, but you can use a regular stand |
| Question: | Can we plug the mic to a computer |
| Answer: | Yeah my brother has this paired with the focusrite solo, Which has a usb connector you put into your pc. You plug your xlr into it and con monitor it directly with gain, and it's good if you plan on upgrading from this mic in the future. |
Product features
Classic Retro Dynamic Vocal Microphone
Achieve quality sound performance and style with Pyle's Classic Retro Microphones. The PDMICR42R vintage series dynamic mics will provide you with that old-school flavor along with today's latest audio reproduction technology. Apart from the iconic stage and studio-tested design, these classic mics feature dynamic moving coil elements, adjustable self-tensioning swivel mounts, cardioid polar patterns, impressive frequency response rates and more - all to create an overall fantastic look and feel.
The Pyle PDMICR42R Series Classic Retro and Vintage Microphones are sure to give you that sound and style you've been looking for.
Technical Specifications:
Red: Mic Element/Type: Dynamic-Pickup/Polar Pattern: Uni-directional Mic Housing Construction Material: Molded ABS Frequency Response: 30Hz-15kHz Sensitivity: 50dB (±3dB @ 1kHz) Output Impedance: 600 Ohm (±15%) Construction Material: Plastic Dimension: 2.2'' x 3.1'' x 7.4'' Sold as: Unit Weight: 1.38 lbs.
Technical Specifications:
Silver: Mic Element/Type: Dynamic-Pickup/Polar Pattern: Uni-directional Mic Housing Construction Material: Molded ABS Frequency Response: 30Hz-15kHz Sensitivity: 50dB (±3dB @ 1kHz) Output Impedance: 600 Ohm (±15%) Construction Material: Plastic Dimension: 2.2'' x 3.1'' x 7.4'' Sold as: Unit Weight: 1.39 lbs.
Technical Specifications:
Black: Mic Element/Type: Dynamic-Pickup/Polar Pattern: Uni-directional Mic Housing Construction Material: Molded ABS Frequency Response: 30Hz-15kHz Sensitivity: 50dB (±3dB @ 1kHz) Output Impedance: 600 Ohm (±15%) Construction Material: Plastic Dimension: 2.2'' x 3.1'' x 7.4'' Sold as: Unit Weight: 1.4 lbs.
Home Audio Power Amplifier System - 2X120W Mini Dual Channel Mixer Sound Stereo Receiver Box w/ RCA, AUX, Mic Input - For Amplified Speakers, PA, CD Player, Theater, Studio Use - Pyle PTA4 Black
Pyle
Product description
Stereo Power Amplifier 2 x 120 Watt Mini Stereo Power Amplifier - 2 x 120 Watt with AUX CD and Mic Inputs RCA REC Output 1/4'' MIC Input Jack 1/4'' Headphone Jack Power On LED Indicator 110/220 Voltage Selector 2 x 120 Watt Peak at 4-Ohm Blue LED Output Level Display 3 5mm Aux CD/MP3 Input Jack Switchable MIC Pager and Mixing Modes Four Push Type Speaker L/R Terminals Switchable AUX1/AUX2/CD and RCA Input Bass Treble Balance Master and Mic Volume Controls Dimensions 8 27''W x 2 72''H x 5 39''D Pyle PTA4 Home Amplifier is perfect for powering any stereo system Complete with AUX/CD inputs and 2 x 120 watts of power -- this simple to use and durable amp has bass and treble controls a slick blue LED output level display L/R RCA inputs and 4 speaker outputs Using sophisticated circuitry and premium components for uncompromising musicality -- this product is famous for delivering powerful and accurate sound This small but powerful amp delivers clear and crisp audio for it listener Durable and affordable this amp is made to last
From the Manufacturer
- 2X120 WATT POWER: The Pyle Dual Channel Stereo Amplifier is perfect for your PA and home theater acoustic sound system. Gives you 2x120W power which can be used for multi speakers w/ 4 ohm impedance, enjoy high quality amplified audio
- 4 INPUTS: This personal digital amp box supports various external sources 3 pairs RCA audio input for tuner, CD player, tape deck, camcorder or VCR, 1/4" microphone IN, 1/4" headphone jack input. Also features a REC output for recording
- PAGER/MIXING MODE: The mini integrated indoor AV receiver features pager and mixing switch. In pager mode, the signal from the microphone will override to auto talkover, use for hosting and meetings. Switch to mixing mode for a fun karaoke session
- PUSH TYPE SPEAKER TERMINAL: The sound amplifying mixer device lets you easily connect speaker wires directly to the amplifier. The total speaker impedance must be at least 4 Ohm per channel at stereo mode
- EQ CONTROLS: The improved professional compact bookshelf sound amplifier features crisp and responsive button for power switch and rotary knob controls for mic volume, balance, bass, treble, master volume, and input source
Product features
Home Audio Power Amplifier System
The Pyle Dual Channel Stereo Amplifier is perfect for your PA and home theater acoustic sound system. Gives you 2x120W power which can be used for multi speakers w/ 4 ohm impedance, enjoy high quality amplified audio
2-CHANNEL AMPLIFIER
Famous for delivering powerful and accurate sound. This small but powerful amp delivers clear and crisp audio for it listener. Durable and affordable, this amp is made to last.
EQ CONTROLS
The improved professional compact bookshelf sound amplifier features crisp and responsive button for power switch and rotary knob controls for mic volume, balance, bass, treble, master volume, and input source
PUSH TYPE SPEAKER TERMINAL
The sound amplifying mixer device lets you easily connect speaker wires directly to the amplifier. The total speaker impedance must be at least 4 Ohm per channel at stereo mode
CONNECT & STREAM
This simple to use and durable amp has bass and treble controls is perfect for powering any stereo system
3.5MM AUX
This small but powerful amp delivers clear and crisp audio for it listener. Durable and affordable, this amp is made to last.
DIMENSIONS
This Mini stereo amplifier has a 8.27 inches Length, 5.39 inches Width and 2.72 inches Height.
Pyle Microphone XLR-to-USB Signal Adapter - Universal Plug and Play XLR Mic to PC Adaptor for Digital Recording w/ Mix Audio Control, +48V Phantom Power, Headphone Volume, USB Cable - PDUSBPP10
Pyle
Product description
Pyle Model : PDUSBPP10XLR-to-USB Microphone AdaptorMicrophone XLR-to-USB Adaptor - USB Mic Interface with Volume Control, Easy USB Plug-and-Play (+48V Phantom Power) Features:Universal USB Microphone AdapterAllows the Use of XLR Microphones on Your Computer Simple ‘Plug-and-Play’ OperationProvides +48V Phantom PowerConnects to Computer via Included USB CableAdjustable Headphone Volume & Mix Audio ControlCompact, Mini USB Audio Interface DesignUniversal Computer Compatibility: Works with PC, Mac, LinuxFor Home, Office & Business UseWhat’s in the Box:Mic AdaptorUSB CableTechnical Specs:Connection Interface: USB Mini 2.0, Powered / XLR, 3-PinFrequency Response: 20-20kHzMic Gain: -15dB (22dB Max)S/N Ratio: 90dBDynamic Range: 100dBT.H.D.: 0.9%Bit Depth: 24 bitSampling Rate: up to 96kHzConstruction Material: Engineered Aluminum AlloyComputer Operating System Support: Windows XP, Vista, 7, 8, 10, Mac OS X, Linux Power Output: USB-Powered, 500 mAUSB Cable Length: 5.9’ ft.Dimensions (L x W x H): 5.7’’ x 1.14’’ x 1.14’’ -inches
- DIGITAL RECORDINGS: The Pyle Microphone XLR to USB Adapter lets you use your most trusted microphones for all your digital recordings. A modular accessory that connects any XLR microphone to a computer to create better-than-CD quality recordings
- UNIVERSAL COMPATIBILITY: Features universal computer compatibility and works w/ Windows PC, Mac and Linux operating systems. Makes it easy to record whenever you want, anywhere you take your computer – from the home studio, to the garage, to the road
- PLUG AND PLAY: The USB to mic input adapter lets you plug an XLR mic to the device and connect the included USB cable on the other end of the adapter so you can then plug the USB connector to your laptop. Enjoy the convenience of digital recording
- MIX AUDIO CONTROL: Equipped w/ adjustable headphones volume for monitoring, and mix audio control for blending microphone and playback audio. Also features a compact, mini USB audio interface design. Perfect for home, studio, office, and business use
- 48V PHANTOM POWER: Provides +48V Phantom power which is widely used as a power source for condenser microphones. Made of engineered aluminum alloy that will surely complement any desktop microphone setup
- Included Components: Mic Adaptor Usb Cable
User questions & answers
| Question: | Can the phantom power be shut off |
| Answer: | I use them for rear speakers in surround sound system. The have quality sound. |
| Question: | Will this allow me to use a shure sm57 if i am recording piano on a laptop |
| Answer: | I tried a box for them and it sounded horrible. They will sound better in an ib set up. |
| Question: | Can this connect to a smartphone |
| Answer: | Someone's review mentions : (note that when you order, one box has 2 speakers in it) |
| Question: | Can this avoid the preamp, and just shoot the signal straight into my pc from a dbx 286s? i want to use the dbx preamps, not these |
| Answer: | I don't know. Look at the specs |
Product features
Universal USB Microphone Adapter
The Pyle Microphone XLR to USB Adapter lets you use your most trusted microphones for all your digital recordings. Features universal computer compatibility and works w/ Windows PC, Mac and Linux operating systems.
UNIVERSAL COMPATIBILITY
Makes it easy to record whenever you want, anywhere you take your computer – from the home studio, to the garage, to the road
PLUG AND PLAY
The USB to mic input adapter lets you plug an XLR mic to the device and connect the included USB cable on the other end of the adapter so you can then plug the USB connector to your laptop.
DIGITAL RECORDINGS
A modular accessory that connects any XLR microphone to a computer to create better-than-CD quality recordings
AUDIO CONTROL
Equipped w/ adjustable headphone volume for monitoring, and mix audio control for blending microphone and playback audio.
EASY TO PLUG
Connect any XLR Microphone and PLug into Comptuer USB
DIMENSIONS
This Adoptor has a 1.14 inches Length, 1.14 inches Width and 5.7 inches Height.
4-Channel Wireless Bluetooth Power Amplifier - 1000W Stereo Speaker Home Audio Receiver w/ FM Radio, USB, Headphone, 2 Microphone w/ Echo, Front Loading CD DVD Player, LED, Rack Mount - Pyle PD1000BA
Pyle
Product description
Pyle Model : PD1000BA
Home Theater Pro Audio Preamplifier
Bluetooth Home Theater Preamplifier - Audio/Video Receiver System with CD/DVD Player, AM/FM Radio, MP3/USB Reader (1000 Watt)
Features:Bluetooth Connectivity:
What's in the Box:
Technical Specs:
The Pyle Home Theater Receiver provides versatile audio and video entertainment. High-Powered stereo preamplifier performance comes loaded with audio playback features including front-loading CD/DVD player, AM/FM radio, USB & SD flash memory readers, aux (3.5mm) input and two 1/4'' -inch microphone inputs. Connect external surround sound speakers to create a cinema-style media experience in your living room. Bluetooth wireless receiver ability is compatible with all of today’s latest devices and features hassle-free setup for instant music streaming. Get connected to your entire home theater system including the TV, DVD player, soundbar, subwoofers and multi-channel speakers for full-ranged pro audio stereo sound enjoyment. Rear panel connector types include speaker terminal binding posts, RCA audio inputs, dedicated subwoofer output, digital optical audio output, component S-video connector -- along with a headphone jack for private listening. MP3 digital audio file support allows you to playback your entire digital media file library while you configure your sound via the front panel button control center. Enjoy versatile audio entertainment ability with the Pyle Bluetooth Home Theater Stereo Receiver System.
- 1000 WATT POWER: The Pyle 4 Channel Pre Amplifier is perfect for your karaoke and home entertainment sound system. It gives you 1000W peak power to be used for multi speakers with 2 8 ohms impedance allowing you to enjoy high quality audio
- 7 INPUTS: The personal digital amp box supports headphones, USB, iPod or MP3, FM tuner, AUX, with front loading CD DVD player, 2 microphone inputs with an echo effect for karaoke, 1 RCA preamp output and 2 mono RCA dedicated for subwoofer
- BLUETOOTH COMPATIBLE: The professional integrated indoor house stereo receiver is equipped with bluetooth wireless music streaming. Works with today’s latest devices including smartphones, tablets, laptops and computers w/ hassle free receiver pairing
- EQ CONTROLS: The speaker sound amplifying device has crisp buttons for the audio sources and selectors, rotary knob for equalization and master volume adjustments. It also features blue LED illuminated buttons and knobs for high visibility
- DISPLAY METER: The compact and rack mount amplifier has a built in digital fluorescent display meter which displays all the functions and input used. A remote control is also included in the package for distant audio adjustments
User questions & answers
| Question: | Can it be left outside under a covered patio |
| Answer: | Hi, yes as long as it is properly covered there. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PD3000BA for more details. Thank you. |
| Question: | can you hook a turntable to this |
| Answer: | Hi, that will depend on your turntable specs. Sometimes you have to use a phono or preamp for connecting a turntable to a receiver. You may use one of the audio input port of the unit for your turntable. Thank you. |
| Question: | Does the USB have shuffle or random play |
| Answer: | Hi, unfortunately no. The unit doesn't have a shuffle mode feature. Thank you. |
| Question: | Can i connect a tv to get sound on 4 speakers at once? how does the tv connect |
| Answer: | Hi, you may use RCA cable connecting this receiver to your TV. You can also use Bluetooth connection if your TV has a Bluetooth feature. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PD3000BA for more details. Thank you. |
Product features
Home Theater Pro Audio Preamplifier
The Pyle Home Theater Receiver provides versatile audio and video entertainment. High-Powered stereo preamplifier performance comes loaded with audio playback features including front-loading CD/DVD player, AM/FM radio, USB & SD flash memory readers, aux (3.5mm) input and two 1/4'' -inch microphone inputs. Connect external surround sound speakers to create a cinema-style media experience in your living room. Bluetooth wireless receiver ability is compatible with all of today’s latest devices.
1000 WATT POWER
The Pyle 4 Channel Pre-Amplifier is perfect for your karaoke and home entertainment sound system. It gives you 1000W peak power to be used for multi speakers with 2-8 ohms impedance allowing you to enjoy high-quality audio
DISPLAY METER
The compact and rack mount amplifier has a built-in digital fluorescent display meter which displays all the functions and input used. A remote control is also included in the package for distant audio adjustments
BLUETOOTH-COMPATIBLE
The professional integrated indoor house stereo receiver is equipped with bluetooth wireless music streaming. Works with today’s latest devices including smartphones, tablets, laptops and computers w/ hassle-free receiver pairing
Speaker Output
Speaker Connectors to produce sound for listeners.
Cooling Fan
Expel warm air from inside.
Front Panel
Button Control Center to easily use the Amplifier.
USB Input
USB ports allow USB devices to be connected to each other.
Latest Reviews
View all
1928 Jewelry Charm Bracelets
- Updated: 28.06.2023
- Read reviews
Bistro Table Set
- Updated: 04.04.2023
- Read reviews
Component Systems
- Updated: 03.02.2023
- Read reviews
Flavor Injectors
- Updated: 21.05.2023
- Read reviews
Eyeglasses
- Updated: 16.07.2023
- Read reviews