Product description

Jensen JMC1250 Bluetooth 3-Speed Stereo Turntable and 3 CD Changer with Dual Cassette Deck

• Refer the FAQ below for troubleshooting
• MP3 CD and CD-R/RW Compatible, Skip/Search Forward and Back, Repeat 1/Single Disc/All Discs
• Random Play, Programmable Memory, Multi-function Back-lit LCD Display
• Clock Display/Sleep/Timer, Auto Stop Dual Cassette Deck, AM/FM Stereo Receiver with PLL Digital Tuning and 20AM + 20FM Presets, 5 Mode Preset EQ, Digital Volume Control, Dust Cover
• **VERY IMPORTANT** Please Note: Kindly refer the User Manual especially manual page E-14 for better use.

User questions & answers

Question:	What kind of outputs does it have? Does it have just an auxiliary in or is there an output
Answer:	This is the Specifications *Bluetooth 3.0 - Supports A2DP, HFP*Belt Drive 3-Speed Stereo Turntable - 33/45/78 RPM *3 CD Changer/Player with Motorized CD Tray *MP3 CD and CD-R/RW Compatible *Skip/Search Forward and Back *Repeat 1/Single Disc/All Discs *Random Play *Programmable Memory *Multi-function Back-lit LCD Display *Clock Display/Sleep/Timer *Auto Stop Dual Cassette Deck *AM/FM Stereo Receiver with PLL Digital Tuning and 20AM + 20FM Presets *5 Mode Preset EQ *Digital Volume Control *Dust Cover *3-Way Stereo Speaker System *Stereo Headphone Jack *Remote Control for CD Player *Output: 2 x 5W RMS *Power: AC 120V/60Hz 40W Remote Control: 2 x `AAA' (UM-4) (Not included)Thank you Johndell All In One Shop
Question:	How tall, wide, and deep is the system
Answer:	The stereo is 12'' wide- 16" high and depth is 14". The speakers are separate and they are 7" wide and 14" high. Hope this helps.
Question:	What is the size of the unit
Answer:	main unit is 14" deep, 18" tall and 12 " across. Each of the two speakers are 14" tall, 8" deep and 8" across. Hope this helps.
Question:	I don't understand 'bluetooth'. Do all CDs, tapes, et al have to be bluetooth compatible
Answer:	The source of the sound such as a CD or a tape has nothing to do with Bluetooth and therefore Need not be Compatible. Look at it this way. Normally if you wish to connect a headphone or a speaker to some device it must have a headphone jack or a place for speakers and then there would be a wire connecting the. Think of Bluetooth as an invisible wire connecting lets say a CD play to a headphone.Yes there is a connection but it's invisible. The source, the music must be able to transmit Bluetooth and the headphones or speakers must be able to receive Bluetooth. So the headphones or the speaker must be Bluetooth Compatible and the tape plat or CD player needs to also be Bluetooth compatible. The CDs or the tapes themselves... do not require any compatibility.I hope that this helps.Thank you Jack UFoundThePlace

Product description

Brand new in box!

• Carbon-injected plus one cones are larger than others in their size class, meaning they move more air and make more bass
• Soft-dome tweeters feature oversized voice coils for greater heat dissipation and higher power handling resulting in smooth, fatigue free highs
• The patented i-mount system allows unparalleled flexibility whether you flush- or Surface-mount your component tweeters
• A dual-level tweeter volume adjustment helps compensate for less-than-perfect speaker placement, and can even be set to suit your personal listening preference and musical taste
• Low-impedance, three-ohm speakers compensate for the undersized wires found in many of today’s cars, and make the most of every watt your car stereo can deliver

User questions & answers

Question:	would these speakers fit a 2007 jeep liberty
Answer:	Yes. Just order the same size for the car
Question:	What all comes in the box? Two tweeters, i hope
Answer:	Yes, 2 mids, 2 tweeters and 2 crossovers
Question:	Will these fit my 2010 nissan alitma as replacement
Answer:	Hi The best would be to check with your installer before you purchase the unit. Thank you,
Question:	Will it fit a 2003 Mini Cooper
Answer:	Yes and no. The speaker size is correct but NONE of the mounting brackets that come with it will work. I put these in my 2002 cooper S. You can custom mount them or order mini mounting brackets. I just drilled new holes for the brackets it came with.

Product features

JBL Premium 6.5-Inch Component Speaker System - Set of 2

JBL engineers designed the GTO 609C component speaker to produce strong, clear sound from a head-unit or amplifier capable of delivering up to 270 watts of power. This makes the GTO 609C an ideal match to systems powered with head-unit or factory-amplifier power levels. Even better, the speaker matches many of the GTO Series amplifier combinations. As a result, it can keep up with systems that feature one or more subwoofers and satisfy high-fidelity audiophile listeners. And its great power-handling specifications also increase reliability over the lifetime of the speaker.

The GTO 609C’s Plus One carbon-injected cones provide more overall speaker-cone area than other cones in its class. With an effective increase in cone area, the speaker radiates more air. Also, its carbon-injected cone material produces a lighter and stiffer cone. The result is a better low-frequency response and a greater ability to make those important musical notes that people often associate with larger speaker sizes.

Product description

Since day one, we have spearheaded the car audio revolution. Nothing has changed. Rockford Fosgate is still the global leader in audio innovation and your passion is our purpose. We engineer the best audio systems for your lifestyle!

• The Prime R165-S is a 6.5" 2-way component speaker system that deliver premium sound quality in an easy to install package
• The R165-S Kit includes a pair of 6.5” woofers with grilles (mounting depth of 1.97"), a pair of 0.5" tweeters with integrated crossovers (mounting depth of 1.06") and mounting hardware
• The 4-Ohm component speaker system has a power handling of 40 Watts RMS / 80 Watts Max
• Perfect for replacing factory speakers, the midrange accommodates direct fit OEM placement and the tweeter with an in-line crossover accommodates flush, surface and angle mounting
• Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller

User questions & answers

Question:	what is the frequency response
Answer:	Yes, you are correct. there is no on/off button. the receiver stays on all the time
Question:	do you need crossovers
Answer:	Yes, you can use the TBP06 with this receiver, but the receiver will only work with one transmitter, TBP06 or mic, at a time.
Question:	So this is a pair correct
Answer:	No, each handheld microphone must have it's own assigned receiver. You can only change the channels 1-6 that you want to transmit on with this receiver.
Question:	i have a 2005 toyota tundra double cab w/ JBL factory system. Will they fit in my front doors? Also, will I need to buy separate mounting brackets
Answer:	I'm not 100% sure but I would imagine if you set the channels to different frequency channels you should be ok. I believe there are 6 channels to choose from on the mic itself. Line6 is pretty helpful. You may even find the answer in FAQ's if you google the mic. I will say that I love this mic! I think it sounds better than the sure sm58 that I have used for years.

Product description

The PT270AIU is a powerful home pre-amplifier that’s been updated for the 21st century — now with support for USB, SD cards, and your iPod or iPhone. Now you can charge your iDevice while playing it back or while using the stereo RCA input on the back. This pre-amp is also equipped with an AM/FM radio with auto-seek and capable of storing up to 50 radio station presets. With a maximum output of 600 watts, the PT270AIU has the power to fill your room with sound. On the front, two ¼” microphone inputs allow you to sing along to your music, making the PT270AIU the perfect amplifier for karaoke parties. You can even add an echo effect to your voices. Outputs include banana-plug speaker terminals, plus two mono RCA outputs dedicated for the subwoofer output, which has its own separate gain control. Control multiple sets of speakers with the A/B speaker out switch. The digital fluorescent display on the front beautifully displays the levels of the input audio. 110 and 220 V switchable.

From the Manufacturer

• 300W POWER OUTPUT: With a maximum output of 300 watts, the PT270AIU has the power to fill your room with sound. This amplifier also has the brilliant digital fluorescent display comes in clear and shows vivid information
• AM/FM MODE: This amplifier has AM & FM antenna for the signal. It also has auto station seek helps you to enjoy listening to your favorite stations w/ capable of storing up to 50 radio station presets & quartz tuner to enjoy listening
• MP3 PLAYER PLUG-IN: With this amplifier, you can enjoy listening to your favorite music. It has an iPod docking station, suitable for all iPod & iPhone models. W/ this docking station, you can connect your iPod while listening to different music
• 4 STEREO RCA INPUTS: 3 Stereo RCA inputs along with 1 RCA stereo input for play media. SD memory & USB ports will also let you play your favorite media. It also has 2 1/4 inch mic inputs & mic volume, tone & echo controls for voice effects
• A/B SPEAKER OUT SWITCH: This amplifier includes banana-plug speaker terminals, plus two mono RCA outputs which made for the subwoofer output, w/ its own separate gain control. It controls multiple sets of speakers w/ the A/B speaker out switch

User questions & answers

Question:	Can I hook this up to my tv
Answer:	If you have RCA out of the TV you can through any input
Question:	Can this be hooked up to a AV Receiver
Answer:	No
Question:	How do you save radio stations
Answer:	If you initiate the "auto scan" it will pick up stations in your local area. Other than the that I have not not yet been able to save a particular station. I've streamed Pandora, I heart, Spotify from my iPhone using the ear-bud jack. I also play CD!s from an external player. That's about all I have to share at this time. Sam
Question:	can this be run in mono
Answer:	I would run this thing to the dump before it burns your house down.

Product description

Overview

A quiet cooling fan system designed to be placed on top of AV components such as receivers, amplifiers, and DVRs. Maintaining an optimal temperature for components prevents overheating, ensures constant performance, and extends their lifespan. The LCD digital controller on the front of the system features a smart thermostat with speed control and status alerts. The steel enclosure houses three dual-ball bearing blowers that pull heat out of the component and exhausts out the rear. The dual ball bearings also allow this fan system to be mounted horizontally or vertically. Its slim low-profile design enables the unit to fit in tight spaces. On the backside are ports to connect and control additional fans. Includes corded power adapter to plug the fan system through an outlet.

Intelligent Programming

Programming includes an easy-to-use thermostat and a SMART mode that automatically adjusts the fan’s speed to react to varying temperatures. Additional features include alarm alerts, fan failure triggers, power savings setting, display lock, and backup memory. Six fan speeds are available with three screen brightness settings. Behind the unit are ports that can control up to six individual AC Infinity AIRPLATE Cabinet fans and MULTIFAN Component fans.

Design and Construction

Each system features dual-ball bearing blowers rated at 67,000 hours and are certified by CE and RoHS. Blowers contain a PWM-controlled motor used to minimize noise during speed variations and are suspended in mid-air with silicone mounts to absorb vibrations. A low-profile design allows the unit to fit in applications with a limited height clearance. Aluminum and steel construction enables additional components up to 30 pounds to be stacked on top.

• A quiet fan system designed for cooling receivers, amplifiers, DVRs, and other AV components.
• Protects components from overheating, performance issues, and shortened lifespans.
• LCD thermostat programming with six speed controls, alarm alerts, failure triggers, and memory.
• Contains three dual-ball bearing blowers with PWM-controlled motors to minimize noise.
• Dimensions: 17 x 13.5 x 1.5 in. | Exhaust: Rear | Airflow: 160 CFM | Noise: 24 dBA

User questions & answers

Question:	How far apart are the feet on the bottom of this unit, front to back? I'm trying to put it above a Panamax mr4300, which isn't deep at all
Answer:	The Rockford Fosgate website says the frequency response for this product is 60Hz - 20kHz
Question:	What is the warranty
Answer:	You do not need crossovers. Speaker wires run from the woofers to the deck and another set of wires will then run from the woofers to the tweeters. The crossovers are built in and you can see them..
Question:	Can it display temperture is celcius
Answer:	Yes it is a pair. For the price they sound good.
Question:	What is the difference between this model and the T
Answer:	My dads truck is a 2004 tundra access cab and we were able to fit the 6 3/4 speakers with the tweeters in the front. But we had to cut a hole in the door panel for the tweeter to flush mount in the factory spot. Hope this helps.

Product features

Stop Overheating and Optimize Performance

Keeping your electronics and components cool below 93° F has shown to prevent overheating issues, ensure top performance, and extends their lifespan. It's a cost-effective solution that pays for itself in the long run.

Intelligent Programming

All AIRCOM cooling systems contain temperature and fan speed controls. AIRCOM T-Series features an additional LCD digital display with Alarm alerts, fan failure trigger, backup memory, ports to control additional fans, and more.

Ultra-Quiet PWM Fans

Each cooling system features dual-ball bearing fans that can blow horizontally or vertically, controlled by a PWM motor to reduce noises during changes in speed. Secured with anti-vibration silicone mounts to minimize noise.

Low Profile Design

A sleek design of only 1.5 inches tall enables the AIRCOM cooling system to fit in applications with a limited height clearance. Steel construction allows additional components of up to 30 pounds to be stacked on top.

Product description

Pyle Model : PLG6C

6.5'' 2Way Component Speaker System

6.5'' 400 Watt 2Way Custom Component System

This Custom Kit Contains

One Pair 6.5'' Mid Bass Speaker

Standard 6.5'' Size Fits OEM Locations

Yellow Color Poly Injection Cone

NonFatiguing Butyl Rubber Surround

High Temperature Aluminum Voice Coil

Special Electroplated Steel Basket

40 Oz. Magnet Structure

Power Handling: 200 Watts RMS / 400 Watts MAX

Impedance: 4 Ohm

Frequency response: 50Hz5KHz

Mounting Depth: 2.65"

One Pair 0.5" Tweeter:

0.5'' Silk Dome Tweeter

Neodymium Magnet

3 Mounting Options: Flush, Surface or Angle Mount

50 Watts RMS / 100 Watts peak

Frequency response: 1.322KHz

Impedance: 4 Ohm

One Pair Passive Crossover Network:

Two Way Passive Crossover

12 dB Octave Slope

Accessories

Includes Grills Wires Installation Hardware

Wiring Kit

Wiring Diagram Template

Cutout Size: Φ142 mm

Get in gear with the Pyle Gear series These speakers are designed to provide the best quality sound for the budgetminded enthusiast. You'll be blasting your tunes and rocking the block with this component speaker kit. It includes one pair of 6.5' midbass speakers, one pair of 0.5' tweeters, one pair of passive crossover devices, a wiring kit, grills, and installation hardware it's a perfect way to upgrade and expand the range of your factory system. The midbass speakers pump with 400 watts of power and fit in most OEM locations. The 100watt, 0.5' silk dome tweeters have three mounting options and a frequency response from 1.3 to 22 kHz. Use the passive crossover networks to separate the signal from your headunit between the midbass and tweeter speakers for a richer, more accurate sound. You'll hear everything you were meant to hear with Pyle Gear.

Part of Pyle's Gear series, this component kit is designed to provide the best quality sound for the budget-minded. Includes one pair of 6.5-inch mid-bass speakers, one pair of 0.5-inch tweeters, one pair of passive crossover devices, a wiring kit, grills, and installation hardware--it's a perfect way to upgrade and expand the range of your factory system.

6.5-Inch Mid-Bass Speakers

These mid-bass speakers pump out 400 watts of power, and with standard 6.5-inch sizing, will fit in most OEM locations. A brilliant yellow poly injection cone provides great rigidity and resistance to harsh weather conditions. A non-fatiguing butyl rubber surround and high-temperature aluminum voice coil mean you'll get years of performance without the wear and tear. The speakers are housed in electroplated steel baskets, and boast a 40-ounce magnet.

1/2-Inch Tweeters

The included 100-watt 0.5-inch tweeters have three mounting options and a frequency response from 1.3 to 22 kHz. The neodymium magnet and silk dome construction help enable clear, well-defined high-end. Choose from flush, surface, or angle mounting to optimize your vehicle's mounting locations and get the best possible treble focus.

Passive Crossover Networks

Also included are a pair of passive crossover networks, with a 12 dB octave slope, to separate the signal from your head unit between the mid-bass and tweeter speakers for a richer, more accurate sound.

Easy Installation

A full wiring kit and all the installation hardware you'll need to add this system to your vehicle are included, along with a wiring diagram.

About Pyle Audio

Pyle Audio's legendary car audio products have acquired devoted fans worldwide. With the recent rapid developments in mobile video technology, Pyle has been on the forefront, making quality systems available at affordable prices. We have also expanded our product scope to include neon and LED lighting accessories, as well as vehicle security systems.

Historically, Pyle Audio has been strictly a car audio manufacturer. This is no longer the case, thanks to our increasingly popular and successful Pyle Pro division. In just a few short years, Pyle Pro has come to be recognized as THE source for professional audio equipment at reasonable prices. We have proven that professional products and exorbitant pricing are not necessarily synonymous.

PLG6C Specs

What's in the Box

Pair of 6.5-inch mid-bass speakers, pair of 0.5-inch tweeters, pair of passive crossovers, grills, wiring kit, installation hardware, and wiring diagram template.

• 6.5” Mid Bass Speakers: The 6.5 inch woofer features an eye catching yellow color poly injection cone; Non fatiguing butyl rubber surround keeps your speakers secure and ensures that the product will last for a long period of time
• High Quality Sound: Listening to good music while on the road has never been this good; The component audio speaker has high temperature ASV voice coil which provides the richest sound, ensuring low distortion and providing an open sound stage
• Heavy Duty Component:The 40 oz magnet structure, special electroplated steel basket, and 0.5” silk dome tweeter are what power these speakers and allow for a 90 Hz to 20 kHz frequency response; It features Standard 6.5” size that fits OEM locations
• Multiple Mounting Options: Allows 3 mounting Options flush, surface or angle; This 4 ohm component also features a mounting depth of 2.65”, ensuring your speakers will stay in place
• Wiring Kit Included: This audio speaker compensates the undersized wire found in many of today’s cars; Includes grills, wires and mounting hardware; Midrange tweeter helps to provide smooth & loud sound
• 400watt 2way custom component system includes pair of woofers, tweeters, and crossovers
• 6.5inch woofers with yellow poly injection cones and butyl rubber surrounds

User questions & answers

Question:	i will be installing these in my Toyota scion TC do i need to install these little cross over things or can i rock with out them please help
Answer:	Hello friend the unit support Carplay and Android Auto, if your car is Android system ,it will suitable and please note this unit is International Standard Double DIN , as long as your car is 2 DIN. It will fit very well.
Question:	I might pair these with boss ch6530 chaos series 6.5-inch 3-way speakers. which ones should i put in the front door
Answer:	Hello friend the unit is 7 Inch double din, it support Android auto and Carplay, if your car is double dDin, it will suitable regards Jacky
Question:	it states free shipping yet the item was $35.54..yet my total was $44.96 ????? where did the $9.42 go to
Answer:	On the description of the radio they list the Iphones that are compatible..
Question:	will they fit in a Harley davidson sattle bag
Answer:	It works with my iPhone 11

Product features

2Way Custom Component Speaker System 6.5” 400 Watt Component with Electroplated Steel Basket

Get in gear with the Pyle Gear series These speakers are designed to provide the quality sound for the budget-minded enthusiast. You'll be blasting your tunes and rocking the block with this component speaker kit. It includes one pair of 6.5' mid-bass speakers, one pair of 0.5' tweeters, one pair of passive crossover devices, a wiring kit, grills, and installation hardware - it's a perfect way to upgrade and expand the range of your factory system. The 100-watt, 0.5' silk dome tweeters have three mounting options and a frequency response from 1.3 to 22 kHz. Use the passive crossover networks to separate the signal from your headunit between the mid-bass and tweeter speakers for a richer, more accurate sound. You'll hear everything you were meant to hear with Pyle Gear.

Product description

Infinity's Kappa speakers set a new standard in car audio. Our Patented Plus One woofers deliver tight robust bass and high-output that is detailed and musical. Edge-driven textile dome tweeters with oversized voice coils deliver silky smooth highs with increased thermal power handling for high volume enthusiasts.Every model is voiced using audiophile grade inductors and capacitors resulting in detail and accuracy unmatched by other brands in their class. And Kappa's 2 ohm design extracts every watt of power from the amplifier or head unit for exceptional performance. Kappa is how all car speakers should perform. In The Box 2 x Speakers 2 x Grilles 2 x Plastic multi-hole adapter rings 2 x Foam gaskets 2 x Crossovers 2 x Tweeters 2 x Flush-mount cups 2 x Threaded flush-mount adapters 2 x Plastic locking nuts 2 x Surface-mount cups 2 x Starfish tweeter mounts 2 x Washers 32 x Screws 16 x Speed clips 1 x allen head bit (2.5mm) 2 x Infinity logo badges 2 x brand stickers Owner’s manual Power Handling - 100W RMS, 300W peak Sensitivity (@ 2.83V/1m) - 93dB Frequency Response - 45Hz – 35kHz Voice Coil Diameter - 1-3/16 in. (30mm) Impedance - 2.5 ohms High sensitivity allows high-output without overdriving the system. With a sensitivity of up to 96 decibels at 2.83 volts/1 meter, Kappa speakers achieve excellent volume with superb musicality with as little as 5 watts RMS. (Kappa speakers are ideal for upgrading original factory-installed speakers.) Speakers are individually tuned with outboard passive crossovers using audiophile grade inductors and capacitors to assure high quality audio versus “off-the-shelf” sound. This means that specifications as well as speaker characteristics are considered when tuning the Infinity sound.

• Infinity’s glass fiber woofer cones are lighter and stiffer with more cone-area than the competition , delivering increased low-frequency output and higher efficiency.
• Edge-driven textile dome tweeters - These are not commonly used W-domes, but edge-driven textile dome speakers that will deliver broader and smoother high frequency response.
• High output 2.5 ohm ohm architecture with low impedance voice coils enables the speaker to extract every watt from the amplifier and deliver peak power with ease.
• Infinity speakers have to undergo a testing process that would destroy lesser speakers. Infinity freezes them, bakes them, shakes them, blasts them with ultraviolet light and drives them at full power for days at a time.
• Infinity is in the business of designing reference quality speakers, and Kappa car audio speakers are no exception.

User questions & answers

Question:	Will my factory unit drive these speakers. It is a 2017 Volvo V60 with what I am told is a 2 ohm audio system
Answer:	Get internal if you dont think you'll have room in your door for an external crossover. Only difference in my point of view is having the option to adjust your tweeters sound.
Question:	Hi I have these in the front and coaxial in th back can I use a 5 channel jl audio rd 900/5 for these
Answer:	No idea. If you go to the Crutchfield website and put in your vehicle info, they’ll give you a list of speakers that fit. Sort it by brand, “Rockford Fosgate” and see if these come up. I haven’t installed them in my new car yet but have put two sets in previous cars. I like the way they sound. Bright not deep. Def need subs with these in my opinion.
Question:	Will these fit the Kia Stinger
Answer:	It will be a little work but they will fit
Question:	How does infinity kappa 60csx compare to the infinity kappa 60.11cs
Answer:	i got 2 sets of these speakers gotta get 4 channel amp 600 watts im running rf 4 ch 1000 w

Product description

The db Series offers superior looks and even better sound. And we've done all that at prices that make high performance affordable to everyone! The db5251 component system works well in OEM factory setups, as well as with high powered aftermarket head units and component power amps. db5251 Features: Dynamic Balance polymer/mica composite mineral filled cone is stiff yet lightweight for big sound, little distortion. Marine Certified Polk db Series speakers are built tough to withstand the toughest environments so they are perfect for use in boats of all types. 25mm liquid cooled silk/polymer composite dome tweeter with neodymium magnet for clear, detailed highs. Flush & surface mount swivel cups allow placement flexibility and soundstage optimization. Low mass 2 layer 25mm Kapton voice coil former is lightweight for high sound output. Kapton's high melting temperature (725°F/400°C!) ensures high power handling and kick butt reliability. Multi hole mounting pattern and shallow depth our highest vehicle application ratio for easy drop in installations in practically any car on the road, including yours. Muscular ABS grilles, computer optimized and based on exclusive MOMO designs. Durable butyl rubber surround won't fall apart under the stress of extreme temperatures, sunlight or time, for years of the great Polk sound. Pole plate heat sink promotes better heat dissipation for superior power handling and reliability. Flat spider for faster, longer excursion linear motion. Flexible woven leads sewn directly into spider for greater reliability. 2nd order Butterworth outboard crossover for fiddle free perfect sound. Electronic tweeter protection circuit protects your tweeters from accidental abuse. Vented crossover housing gives you a choice of hidden wire channels for easier, more professional looking installs. Rock solid, acoustically inert stamped steel basket finished in rustproof gun metal gray. Stainless steel hardware. All Polk products are ma

• A single unit 2 way component speaker system
• Equipped with a 5.25 inch polymer/mica composite cone with rubber surround
• Maximum input power: 250 watts
• Equipped with one 1 inch liquid cooled silk polymer composite dome tweeter and a neodymium magnet
• Supplied adaptor rings enable a flexible fit for both 6.5 and 6.75 inch applications

User questions & answers

Question:	It is return as a single unit mentioning "one 1inch tweeter in description area. please clarify
Answer:	Hello, Thank you for taking the time to reach out to us with your product question! At this time, we would only be able to provide the actual dimensions of the unit from length/width/height. We apologize for this inconvenience. Dimensions: 17 x 13.5 x 1.5 in. Thank you for your question! Kind regards, The AC Infinity Team-
Question:	What is the 12 volt battery required for
Answer:	Hi there! Thank you for taking the time to reach out to us with your product question! The warranty for our products covers any malfunctions, or manufacture defects. The warranty does not cover customer induced malfunctions such as those caused by cutting, splicing, drilling, painting, stripping, gluing, or other activities that might bring unnecessary damage to the fan unit. This warranty is good for 2 years from the time of the product's purchase. Thank you for your question! Kind regards, Andrew Avila
Question:	Where can I get a bracket so they will fit my 2007 Prius
Answer:	Hello there, Thank you for taking the time to reach out to us with your product question. The firmware on the T8, as well as all AIRCOM "T" series units, is capable of displaying temperatures in both Fahrenheit, as well as Celsius. Kind regards, Andrew Avila AC Infinity
Question:	Is this a single speaker, or a pair
Answer:	Hi Tony!Thank you for your inquiry!The differences between the AIRCOM T8 and AIRCOM T9 would be the exhaust direction in which the warm air is re-directed.The AIRCOM T8 exhausts towards the rear, which is ideal for cabinets where the back would be exposed. This will allow the warm air to be removed without any delay from shelves or other variables.The AIRCOM T9 is a top exhaust, which is ideal for applications where the top would be exposed.This is primarily used on receivers and amplifiers that are either exposed, or have exhaust vents located towards the top.Thank you for taking the time to contact us directly!Warm Regards,Tommy KaragiasAC Infinity

Product description

All your music - This stylish micro system lets you stream playlists and more via Bluetooth, play CDs and listen to FM radio. The digital radio tuner with 10 presets delivers clear reception, and the CD player can read MP3 CDs and recorded CDs.

• All your music - This stylish micro system lets you stream playlists and more via Bluetooth, play CDs and listen to FM radio. The digital radio tuner with 10 presets delivers clear reception, and the CD player can read MP3 CDs and recorded CDs.
• Bass-reflex loudspeakers. Richer low tones - These bookshelf-style loudspeakers give you clear sound and good bass thanks to the combination of woofer, tweeter, and bass-reflex ports. A 60 W maximum output brings big sound to any room. Perfect for a lounge or open-plan living space.
• Classic design - The two-tone central unit and speaker cabinets recall the design of hi-fi separates. The textured volume-control dial adds a satisfying analog feel to operation. There are buttons on the front of the unit for playback and source selection.
• Digital Sound Control. Choose a preset sound style - Hip-hop or choral, symphony or rock opera? Whatever you love, this micro system's Digital Sound Control function lets you enjoy it more. Pick from preset sound styles designed to bring out the best in your music.
• At home in your home - This AC-powered micro system looks great in any room. Bluetooth wireless range is 10 m, and you can charge a smart device via the USB port. An easy-to-use remote puts key functions at your fingertips.

User questions & answers

Question:	Does this have am as well as fm
Answer:	This camera is a digital camera, it will require an ethernet connection between the NVR and the camera to view the live feed. Thank you for choosing Night Owl.

Product description

PyleHome Model : PT390BTU

Bluetooth Home Theater Stereo Receiver

Digital Home Theater Bluetooth Stereo Receiver, Aux (3.5mm) Input, MP3/USB/SD/AM/FM Radio, Mic Inputs, 300 Watt

System Features:

4Channel Receiver System

Powers Up to 4 Speakers

Bluetooth Wireless Streaming Ability

AM/FM Radio with Digital LCD Display

USB Flash & SD Memory Card Readers

MP3 Digital Audio File Compatibility

Aux (3.5mm) Input Connector Jack

Ability to Connect External Devices

(iPhone, Android, Smartphone, iPad, Tablet, etc.)

Pair Speaker Terminal Binding Posts

1/4'' Microphone Inputs

Pair RCA (L/R) Audio Input Connector Jacks

Pair RCA (L/R) Audio Output Connector Jacks

Connects to TV, Home Theaters, External Speaker Systems

Radio Station Auto Scan, Tuning Control

Builtin Ventilation Cooling Fan

50 Radio Station Memory PreSets

Main Volume/Balance/Treble/Bass Controls

Microphone Volume/Bass/Treble/Echo Controls

Includes Antennas, Audio Cable, Remote Control

Bluetooth Connectivity:

Instantly Receives Wireless Music Streaming

Works with all of Your Favorite Devices

(iPhone, Android, Smartphone, iPad, Tablet, etc.)

Bluetooth Version: 3.0

Technical Specs:

Peak Power Output: 300 Watt

Impedance: 8 Ohm

T.H.D.: <1%

S/N Ratio: >76dB

Input Lvl. Impedance: 350mV/47k

Tone Characteristics: +/12dB

Input Sensitivity: 300mV/33k

USB/SD can play what file types: MP3, WMA, WAV

Maximum USB/SD Card support size: 8GB

Frequency Response: 20Hz20kHz

Dimensions (L x W x H): 16.9'' x 12.2'' x 4.7''

Power: 110/220V Switchable

The Pyle PT390BTU Bluetooth Home Stereo Receiver brings music to any room with crystal clear clarity. This system features Bluetooth wireless music streaming ability. You will be able to wirelessly, and instantly, stream your audio through this four channel highpower system, which powers up to 4 speakers. System features include AM/FM radio, USB and SD memory card readers for MP3 digital audio file playback, Aux (3.5mm) input to connect external devices like smartphones and tablets, 1/4'' microphone input jacks along with RCA audio inputs and outputs. Connect some mics for a karaoke party and adjust the volume, balance, treble and bass on the master output for total control of your sound. The system also includes AM/FM antennas, remote control and audio connection cable. Enhance your entertainment experience and connect it all with the Pyle PT390BTU Bluetooth Digital Home Stereo Receiver.

• 300 Watt Power: The Pyle Digital AM/FM stereo receiver is perfect for your PA, karaoke and home entertainment system; It gives you 300W peak power to be used for multi speakers w/ 8 ohm impedance allowing you to enjoy high quality amplified audio
• 8 Inputs: The personal digital amp box supports iphone, Smart phone, computer, iPad, USB, SD, MP3, AM FM radio tuner, CD Player; Features 2 microphone inputs w/ echo, 2 RCA inputs, 2 RCA outputs, 4 pairs of speaker terminal binding posts
• Bluetooth Connectivity: The professional Integrated Indoor house stereo receiver is equipped w/ bluetooth wireless music streaming; Works w/ today’s latest devices including smartphones, tablets, Laptops and computers w/ hassle free receiver pairing
• EQ Controls: The sound amplifying device has crisp buttons for audio sources and selector, rotary knob for equalization, mic and master volume adjustments; Features blue LED illuminated buttons to easily adjust the functions even in the dark
• Display meter: The compact and rack mount amplifier has a built in digital LCD display meter which displays all the functions and input used; Antenna, audio cable cord, remote control are also Included in the package for distant audio adjustments

User questions & answers

Question:	With the rca output on this radio, can i connect to my self amplified pa speakers. also how can i connect my coax fm radio antenna to this radio
Answer:	Yes but this radio is soo poorly made I wouldn’t waste your money, don’t buy it
Question:	Replacement remote
Answer:	Thank you for bringing this to our attention. We can provide the part/s that is available in our warehouse. For other concerns and inquiries kindly call our Technical Support Department at 718 535 1800 Press 2 then 1 from Monday to Friday 9 AM to 5 PM EST. Thank you.
Question:	is their an input for a cassette deck
Answer:	No, and the inputs it does have suck. Don't buy this.
Question:	Each output is 300 watts or is the total
Answer:	300 watts total output power

Product description

The Rockford Fosgate Power series is the finest in audiophile grade sound. Since the original introduction of the Power series, Rockford raised the bar for high-end car audio products. The most recent Power speakers integrate unique Rockford Fosgate technology and advanced engineering that result in the best Power sound to date. The VAST surround provides a larger surface area for the cone. Vast, or Vertical Attach Surround Technique gives about 25% more effect radiating cone, which improves both the efficiency and maximum output capabilities. The new flex fit basket utilizes holes and slots as opposed to the traditional speaker mounting holes. This gives the speakers an easier fit into OEM opening, as well as a secure fit. To separate the mid and high frequencies, Rockford uses an external component crossover that is one of the best in the market today. This audiophile grade crossover effectively replicates the musical quality with detailed accuracy. The tweeters integrate DDC tweeter mounting technology to provide the most secure fitting of the tweeter with an easy installation.

• Power Handling: Peak: 240 watts per pair / RMS: 160 watts per pair
• Injection-Molded Carbon Fiber filled Polypropylene cone material
• 1" Treated-Cloth Dome tweeters
• Butyl Rubber speaker surround
• 1" high-temperature voice coil
• Frequency Response(Hz) 55Hz - 22kHz

User questions & answers

Question:	compatible with a 2007 BMW 328ix coupe
Answer:	you get two speakers, two tweeters, and two crossovers
Question:	Will these work with the R600X5 amplifier
Answer:	Took me a minute to figure out where you came up with question. No battery required; it's odd that they put that in the description. No worries...these are just speakers so the only thing you need a 12 volt battery for is to power the head unit or amplifier you plan on hooking these speakers up to.
Question:	What does component mean
Answer:	I'm not sure exactly what is needed, but try Sonic Electronix. They have several Toyota speaker adapters here: http://www.sonicelectronix.com/search_new.php?keyword=toyota+speaker+bracket&action=search&show_description=1&show_thumbnails=1&Submit2=Search+Now%21
Question:	do these speakers need to be hooked up to a amp? or can run off vehicle (2002 Tahoe) factory hook up's
Answer:	Polk ships these as pairs. AFAIK, Polk only sells subwoofers as singles, and you can spot a subwoofer because there is no tweeter. (Tweeters can be either mounted in the middle of the woofer cone, or are separate components, as the are in the DB5251.)

Product description

Since day one, we have spearheaded the car audio revolution. Nothing has changed. Rockford Fosgate is still the global leader in audio innovation and your passion is our purpose. We engineer the best audio systems for your lifestyle!

The PRIME series Component System kits are a new generation of factory replacement speaker delivering authentic Rockford Fosgate sound. The R152-S is a dedicated 2-way component system utilizing a Mica injected polypropylene cone for extended frequency response and accommodates direct OEM installation. The tweeter features a Mylar balanced dome to reproduce crystal clear highs, an in-line crossover for simplifying installation, and accommodates flush, surface and angle mounting.

The Rockford Fosgate Prime Series A new generation of performance geared toward the "novice" car audio enthusiast, the Prime series full-range and component speakers feature legendary Rockford Fosgate sound quality while fitting into any budget.

---

R152-S Features Mica Injected Polypropylene Cone With Rubber Surround Adds strength and rigidity Provides resiliency against high power output Full bodied sound 18 AWG Stamped Steel Frame Textured abrasion resistant powder coated finish Direct OEM mounting applications Shallow mounting depth 1/2-Inch Mylar Balanced Dome Tweeter Lightweight mylar combines high sensitivity and smooth extended frequency response Ensures low distortion Provides an open sound stage Multiple mounting configurations--flush/surface/angle Built-In Tweeter Crossover A high-pass crossover is integrated into the tweeter housing. This crossover allows for easy connection of the full component system. Just jump wires from the secondary terminals on the mid-range/woofer to the tweeter terminals.

Factory replacement speaker delivering authentic Rockford Fosgate sound. Click to enlarge.

---

R152-S Specifications

Configuration:	2-Way Component System
Midrange Diameter:	5.25" (133mm)
Midrange Depth:	4.76" (12.1cm)
Tweeter Diameter:	0.5"
Tweeter Depth:	n/a
Frequency Response:	58Hz - 20kHz
Power Handling:	40 Watts RMS 80 Watts Max
Crossover:	Tweeter High-Pass (HP): 6dB
Sensitivity:	85dB @ 1 watt/1 meter
Grilles Included:	Yes
Mounting Hardware:	Yes

---

Thirty Years of Rockford Fosgate

Rockford Fosgate products have been designed and engineered in Tempe, Arizona since the beginning. Rockford's 30 year reputation is grounded in engineering and manufacturing some of the finest audio products in the world. The company's no-compromise approach has yielded patented iconic products such as the Punch EQ, Punch 45 amplifier and the 3Sixty integrated signal processor. Today, Rockford's new products push the performance envelope even further. Each new product is a step forward--they sound bigger, they play louder, and run longer. Rockford never settles for "good enough."

The 2010 product line represents the company's core philosophy. Rockfords new amplifiers, speakers and subwoofers have raised the bar on the competition.

---

What's in the Box

Rockford Fosgate Prime R152-S 5.25-Inch Component Speaker System (Two Woofers, Two Tweeters), Grilles/Trim Rings, Mounting Hardware and Tweeter Angle/Surface/Flush Mounts, User's Manual

---

Want a Little Extra?

For those willing to invest a bit more, Rockford also offers the Punch Series P152-S and Power Series T152-S 5.25-inch component kits.

---

Prime Series Component Kits

Rockford Fosgate Prime R152-S 5.25-Inch Component Speaker System	Rockford Fosgate Prime R1652-S 6.5-Inch Component Speaker System

• 5-1/4" mica-injected polypropylene woofer cone with foam Surround
• 1" Mylar balanced dome tweeter
• Power range: 2-40 watts RMS (80 watts peak power)
• 5.25-inch two-way component system with 80 watts maximum power handling (40 watts RMS)
• Mica-injected polypropylene cone with foam surround
• 1/2-inch mylar balanced dome tweeter with surface/flush/angle mounts
• High-pass filter built into tweeter
• 57Hz - 20kHz frequency response with 88dB sensitivity

User questions & answers

Question:	Si funcionan para una Dodge Ram 1500 año
Answer:	Assuming you are installing these speakers as a direct replacement for an equivalent size speaker, yes they will fit. The speakers come with a plastic mounting plate that you can use for a custom fit install, should the speaker alone not fit properly.
Question:	Does this come with dash speakers
Answer:	Sure, it’ll work great!
Question:	I may have missed it in the description, it says “shallow mounting depth”, but what’s the actual depth measurement
Answer:	It means that the mid driver runs off the channel and the tweeter runs of the crossover that's included . Say you wanted to run two sets of components on one channel at 2 ohms you could by running two 4ohm components . To do the same thing with just a standard mid driver and tweeter you would have to run the mid and tweet at 8 ohms together to make a 2 ohm load on your 4 channel amp .
Question:	What size is the tweeter
Answer:	Yeah they will, would sound better hooked to an amp but they're fine to run on stock stuff too.

Product description

The SPX-65C - 6.5-inch 2-Way high performance component speaker system delivers unequivocal sound quality and performance for the most enhanced listening experience. The SPX series was engineered to be efficient and powerful, all while sounding incredible at the loudest volumes. Featuring a premium butyl rubber surround and a PMI composite multi-layered cone, as well as a high temperature 1.35-inch voice coil, every aspect of these speakers is of the highest audiophile grade. This component speaker system utilizes an external crossover network, as well as 25mm (1-inch) aluminum dome tweeters with silk surrounds for crystal clear high frequency sound reproduction. Frequency Response: 42-20,000 Hz. Sensitivity: 92 dB. Sold as a pair. Impedance: 4 Ohms. Max Power: 400 Watts (Pair), RMS Power: 200 Watts (Pair). Mounting accessories as well as speaker grilles are included. Mounting Depth: 2.64 inches.

• Peak Power Handling: 400 Watts (Pair)
• RMS Power Handling: 200 Watts (Pair)
• PMI Composite Multi-Layered Cone and Premium Butyl Surround
• 1-inch High Performance Aluminum Dome Tweeters with Silk Surrounds
• Impedance: 4 Ohms | Sensitivity: 92 dB
• Frequency Response: 42 - 20,000 Hz | Powerful Neodymium Magnets
• Woofer Mounting Depth: 2.64 inch

User questions & answers

Question:	Do you run these on a separate amp from the sub woofer
Answer:	No sabría responderte, en mi auto un bmw e36 entraron Perfecto
Question:	Will they fit the front doors of a 2000 sierra
Answer:	The tweeters can be mounted on top corner of dash but may fit in pre - cut outs in dash.
Question:	What is the diameter of the tweeters housing
Answer:	Hi Matthew, the depth is 1.85" - top mount only. Regards, Don
Question:	what is the cut out size for the
Answer:	a little less than 1 1/2" wide x 1 1/4 deep

Product features

Technical Specifications

• 6.5” High Performance 2-Way Component Speaker Set
• Impedance: 4 Ohm
• RMS Power: 200 Watts (Pair)
• Max Power: 400 Watts (Pair)
• Frequency Response: 42 Hz - 20 kHz
• Sensitivity: 92 dB
• 1.35” High Temperature Voice Coil
• 1” Neodymium Aluminum Dome Tweeters
• Audiophile Grade Crossover Network
• Die Cast Aluminum Basket