13 best oem cb radios
OEM CB radios, or Original Equipment Manufacturer Citizens Band radios, are communication devices that operate on the Citizens Band radio service. These radios are designed and manufactured by a specific company for installation in vehicles or as standalone units. They are commonly used in various industries such as trucking, off-roading, and emergency services, as well as by hobbyists and enthusiasts.
Here are some key features and information about OEM CB radios:
Purpose: OEM CB radios are primarily used for short-distance communication.They operate on 40 channels within the 27 MHz frequency band and are widely used for communication between drivers on the road, especially in the trucking industry.
Installation: OEM CB radios are often integrated into the dashboard or console of vehicles during the manufacturing process. This means they are professionally installed and can be seamlessly integrated with the vehicle's electrical system.
Channels: CB radios offer 40 channels, each with a specific frequency. Channels 9 and 19 are commonly used for emergency and highway information purposes, respectively.
Output Power: The power output of OEM CB radios is limited by regulations, typically around 4 watts for AM modulation. This power level is sufficient for short-range communication.
Antenna: The performance of a CB radio greatly depends on the quality of the antenna. OEM installations usually come with a factory-installed antenna, but many users opt to upgrade to more efficient external antennas for better range and clarity.
Features: OEM CB radios may have additional features such as adjustable squelch, RF gain control, noise filters, and built-in weather channels. Some also include a PA (Public Address) system for external communication.
License-Free: Unlike some other radio services, CB radio does not require users to obtain a license for operation. It is open for public use, which contributes to its popularity.
Range: The range of CB radios can vary widely depending on factors like terrain and antenna quality. In optimal conditions, they can cover several miles, but in hilly or urban areas, the range may be limited to a mile or less.
Accessories: Users often purchase accessories like external speakers, SWR meters (for tuning the antenna), and noise-canceling microphones to enhance the performance of their OEM CB radios.
Regulations: It's important to note that there are strict regulations governing the use of CB radios. Users must adhere to these regulations to avoid legal issues.
OEM CB radios are valuable tools for communication, especially in industries where reliable short-range communication is essential. Their integration into vehicles during manufacturing ensures a seamless and professional installation, making them a convenient choice for many users.
Below you can find our editor's choice of the best oem cb radios on the market
Motorola Original OEM PMMN4013 PMMN4013A Remote Speaker Microphone with 3.5mm Audio Jack, Coiled Cord & Swivel Clip, Intrinsically Safe
Motorola
Product description
Motorola PMMN4013A Speaker Mic Fits For CLS1410 XTN GTX RDX CP200 PR400 CT250 Radios Walkie Talkie Microphone cheap Hand Held 2way NEW
- For CLS1410 XTN GTX RDX CP200 PR400 CT250 Radios
- Genuine Motorola Part
- One Year Replacement Warranty Through Motorola
- Black
- Comes on Non-retail packaging
User questions & answers
| Question: | Is this compatible with the T |
| Answer: | No |
| Question: | Will this mic work in a kenwood radio |
| Answer: | Depends on the connection. I'm not exactly sure what kenwood model maintenance uses at my job but this works fine with their radios. |
| Question: | Will this work on a beofeng |
| Answer: | No |
| Question: | Will it fit a maxon tp |
| Answer: | No. Only Motorola radios |
Cobra 29LX Professional CB Radio - Emergency Radio, Travel Essentials, NOAA Weather Channels and Emergency Alert System, Selectable 4-Color LCD, Auto-Scan and Radio Check, Black
Cobra
Product description
"From natural disasters and national emergencies to unprecedented times, Cobra is the most trusted brand in communication and power solutions. We believe reliability and quality aren’t optional. It’s our standard. Citizens Band Radio (also known as CB radio) is, in many countries, a system of short-distance radio communications allowing people to speak over long distances. Keep in touch and stay alert on the road withThis Cobra CB radio. The 29 LX features a modern aesthetic design with a selectable LCD dot matrix display to compliment the interior of any cab. The display also has customizable night and day settings to enhance readability in both very bright and dark conditions. Based on the 29 LTD classic platform with added features (NOAA weather reception, 4-color display, and monitor the vehicles antenna system, voltage system, and the radio's RF output power). The 29 LX features a modern aesthetic design with a selectable LCD color display in red, green, blue, or amber to complement the interior of any cab. The display also has customizable night and day settings to enhance readability in both very bright and very dark conditions. In addition, Cobras latest CB Radio features a new clock/timer that enables drivers to track their on-time driving hours. The driver clock/timer also functions as an alarm clock. A classic, full-featured CB radio with a modern design. Click here for a larger imageThis model is based on the 29 LTD Classic platform, with added features: The new weather receiver with scan automatically advances to the next clear channel when driving cross-country ensuring the driver is always getting the latest weather alerts and warnings. Also new is the industrys first and only Radio Check Diagnostic. Now users can monitor the radios RF output, SWR setting, and vehicle battery voltage. The 29 LX also includes all 40 channel scan and memory channel programming, Instant channel 9 and 19, audible key tones, channel frequency readout for CB and weather channels, 4 watts AM RF power output, the maximum amount of power allowed by law; Talk Back controls allowing drivers to adjust the desired amount of modulation talk-back. 29 LX Features Selectable 4-Color LCD Display With Dimmer Choose from four easy-to-read display colors for viewing operating channel frequency and other data: red, blue, green and amber. Match your cab or just your preference with ease. You can also adjust the brightness of the front panel for day and night driving. 10 NOAA Weather Channels With Emergency Alert The 29 LX provides instant access to 10 National Weather Channels, 24 hours a day, in all 50 states. The Emergency Weather Alert feature lets you know you if threatening weather is nearby with an alert tone even if CB is turned off. The unit can also automatically scan for the nearest/strongest weather alert signal. Talk BackThis control is used to adjust the desired amount of modulation talk back that is present at the speaker during transmit. Choose from four easy-to-read display colors: red, blue, green and amber. Radio Check Diagnostic / Antenna Calibration Allows testing of important radio functions such as RF power, antenna condition and battery voltageget your house in order before heading out. SWR Calibration allows calibration of antenna system for maximum performance. Antenna should be bought separately. Memory Channel With Scan Feature Store up to 10 of your most frequently used channels for quick access, and scan through all of them as needed. A standard channel scan is also provided for scanning all 40 channels Clock/Timer/Alarm Also included is a a clock/alarm and on-duty timer, handy for professional drivers. Nine-Foot Microphone Cord A generous nine-foot cord provides easy reach within any area of the vehicle. A 4-pin front microphone connector allows convenient installation to be in dash or under dash. 10 NOAA Weather channels with emergency alert and auto-scanning. Speak Clearly The adjustable Dynamike feature boosts your microphone for increased voice clarity, and Delta Tune clarifies incoming signals. You can also adjust RF gain in weak or strong signal areas to optimize. PA Capability You can useThisThis CB radio as a Public Address System with PA speaker. Receive signals can also be monitored through PA. 4 Watts AM RF Power Output Transmit with the maximum amount of power allowed by law. Instant Channel 9 and 19 Instant access to emergency channel 9 and information channel 19. What's in the Box 29 LX LCD CB Radio, Microphone With Nine-Foot Cable, Mounting Hardware, Power Cabling "
- Emergency Radio - CB Radios provide reliable communication which is not dependent on satellites and cellular networks that can be the difference between getting experienced help in an emergency and being left on your own when you need assistance.
- NOAA Weather Channels - Be the first to know of incoming hazards or changing weather with instant access to NOAA weather channels 24 hours a day.
- Weather & Alert Scan - Automatically tune into the strongest weather channel and alert tone available to catch every important weather notice. With the 29LX you won't miss important information while scanning through channels.
- Clock & Alarm – Display the current time on screen and keep yourself alert by setting an alarm for anytime during the day to make sure you're always on time.
- Radio Check & Frequency Display - Automatically run diagnostics for voltage and RF output, with antenna matching to ensure that the signal is as strong as possible and working properly. Operating CB and weather frequencies also displayed on screen.
Product features
40 CB Radio Channels
Scan the complete range of all 40 channels for full coverage of CB stations.
Heavy-Duty Dynamic Microphone
Includes a CB Mic that was designed to last as far and as long as your travels take you.
Adjustable Dynamike Boost
This feature increases the microphone's sensitivity for increased voice clarity.
Instant Channel 9
Immediate access to Emergency Channel 9 to ensure you're driving safely from the very beginning.
Switchable Noise Blanker
Reduce the amount of static or unwanted electrical interference caused by your vehicles engine with this Switchable Noise Blanker.
RF Gain
Adjust reception sensitivity range for clear communication.
Workman MH4B CB Radio Microphone Holder With Adhesive Back
Workman
Product description
Workman MH4B CB Radio Microphone Holder With Adhesive Back
User questions & answers
| Question: | will a midland 75-785 radio fit this holder |
| Answer: | That is just a microphone holder, not for the radio itself, but any standard cb microphone will fit. |
Uniden PRO401HH Professional Series 40 Channel Handheld CB Radio, 4 Watts Power with Hi/Low Power Switch, Auto noise cancellation, Belt Clip And Strap Included, 2.75in. x 4.33in. x 8.66in.
Uniden
Product description
We deliver the convenience of a handheld CB radio with the security of knowing you have the longest range possible so you can always stay in touch. Whether you're in your car, truck, Van or bike, over the road, camping out or just out hiking the trail The high performance PRO401HH s you're never out of touch. The PRO401HH also includes a low-power setting to conserve battery life and a high-power setting so you can extend your range when needed. Safety, style and range, All brought to you by Uniden, The rest name in CB radios.
- The Uniden PRO401HH delivers the convenience of a handheld CB radio with the security of knowing you have the longest range possible so you can always stay in touch.
- Features a low-power setting to conserve battery life and a high-power setting so you can extend your range When needed.
- Designed for use in the citizens band (CB) radio service, the PRO401HH mobile radio will operate on any of the 40 CB frequencies authorized by the (FCC).
- Whether you're in your car, truck, Van or bike, over the road, camping out or just out hiking the trail, The high performance PRO401HH s you're never out of touch.
- It’s compact and lightweight, weighing approximately 1 pound making it easy to operate with one hand. The design features strategically placed controls and jacks on the top, left, and right side.
- You can use rechargeable (9 AA Ni-MH) or alkaline (9 AA) batteries (not included). The included DC power cable will also charge your AA Ni-MH batteries. A switch inside the battery compartment lets you select rechargeable or alkaline batteries.
- Included Components: Uniden Pro401Hh Handheld Cb Radio
User questions & answers
| Question: | the truck i am currently driving is old and has no cig/12 volt power availible. can i charge this at night and use it without having it plugged in |
| Answer: | No you have to plug it in charge it all the way up or wire a 12 v power adapter from the battery in your truck and you can charge it there |
| Question: | Would this be a strong enough cb for listening to close (< 1 mile) truck drivers communicate while on the highway without an added antenna |
| Answer: | No, it will not likely work. The metal body of the vehicle shields you from the signal of others. I take mine while I am driving on the Interstate. The only thing I have ever picked up is when the truckers are right next to me while I am sitting in traffic and not moving. When I am outside the vehicle, I pick stuff up within a mile or two. Most of the truckers are all using single sideband radios, and you won't be able to pick them up with this radio at all. |
| Question: | what is the exact range this can be used if indoors like say im in a apartment my brother is like 2 miles away in a house will it go that far |
| Answer: | There is NEVER an exact range for radio communication. The FCC rules require that CB's put out no more than 4 watts. I have accidentally talked to a guy in New Zealand from Ventura, CA and also from there to Florida. Other times you can't talk across town with the same radio. In your situation, if the two of you are in rooms with windows that face each other you can probably talk with two of these radios and no outside antenna. But put a small magnet mount outside your window, on a pizza pan (steel) and run a wire from your pizza pan to your radio and connect it to the outside of the antenna connection and now you have an ok base station antenna and ground plain, and will be able to talk much further. |
| Question: | Has anyone used the uniden pro401hh? if so what do you think of it. what is the range of the device and do you think it would work in the woods |
| Answer: | I have used this. In an open field was able to get .4 miles. I have not been in the woods yet. |
Product features
40 CB Channels
The Uniden PRO501HH includes the CB features you need every day. 40 CB channels let you tune in to the action channels or break away to do your own thing.
NOAA Weather Alerts
NOAA Weather keeps you informed when severe weather threatens. And, the Dual Watch feature lets you talk on one channel, while keeping an ear on another channel you are interested in.
Uniden is the Name in CB Radios
Use High power to punch out the strongest signal, or low power to preserve those batteries. Remember, Uniden is the name in CB radios.
CB Radio Antenna Quick Release Mirror Mount with 180 Degree Swivel - Workman QRCS3
Workman
Product description
Workman QRCS3 CB Radio Antenna Quick Release Mirror Mount with 180 Degree Swivel
- Stainless Steel
- Can Be Mounted Anywhere Jaws Can Fit
- 180 Degree Swivel
- Can Be Mounted to Either A Vertical or Horizontal Bar
- Twist to Latch On or Release
User questions & answers
| Question: | Will this mount an NMO type antenna |
| Answer: | It depends....NMO antennas usually require NMO mounts. The quick mount is designed for a standard antenna mount. Some NMO antennas have adapters for NMO to standard mounts, typically at extra cost. The customer should check options and dimensions with the antenna manufacturer. |
| Question: | What size is the hole for mounting the antenna stud mount |
| Answer: | While I think it is mentioned in an answer to another person's question, it's the de-facto standard for CB antenna mounts of 1/2". |
| Question: | Is the swivel back at the antenna hole |
| Answer: | The plate where the antenna mounts is the swivel. It has two allen head set screws. This thing is awesome! I have two of them......best clamp ever! |
| Question: | How wide does the jaws open |
| Answer: | The jaws open to 2 inches (5.08 cm) maximum. |
Replacement stock MIC/Microphone for 4 pin Cobra CB Radio - Workman DM507-4
Product description
REPLACEMENT CB RADIO MICROPHONE 4-PIN Connector 6 FOOT FLEXABLE CORD COBRA, GALAXY, CONNEX Bulk (no retail package)
- REPLACEMENT CB RADIO MICROPHONE
- 4-PIN Connector
- 6 FOOT FLEXABLE CORD
- COBRA, GALAXY, CONNEX
- Bulk (no retail package)
User questions & answers
| Question: | What is the diameter of the cord |
| Answer: | About 1/2 inch |
| Question: | Is this mike loud and clear |
| Answer: | I have had no trouble at all and yes loud and clear |
WORKMAN NF 20 CB RADIO STEREO POWER NOISE FILTER 120w RMS POWER HANDLING
Workman
Product description
WORKMAN NF 20 CB RADIO STEREO POWER NOISE FILTER 120w RMS POWER HANDLING
- CB RADIO / STEREO POWER NOISE FILTER
- STOPS ELECTRICAL INTERFERENCE
- STOPS NOISE ON AUTO POWER SOURCE LEDS
- 120 WATTS RMS POWER HANDLING
- WORKING VOLTAGE IS DC 9-12 volt
User questions & answers
| Question: | I need to see a wiring diagram for bandit. thank you. Lost Mine |
| Answer: | It is just power wires + and - hook it up from the battery and to the device it says input and output on the backside. |
| Question: | How thick is the wire? im planning on using it for my rci-2950cd. it uses 6 amps |
| Answer: | I think it's rated for 10 amps. |
| Question: | Do you ship usps or fedex |
| Answer: | usps |
| Question: | Will this remove the static on my radio caused by LED headlights |
| Answer: | It did not work for me with my led warning light bar, i could still hear the lights flashing in the raido. |
bestkong 2 PCS Mic Microphone Holder Hand Up Clip HLN9073 for Motorola CB For Kenwood mobile Radio
Product description
Compatible Models:
XPR4350 XPR4550 CDM750 CDM1250
GTX800 GTX900 GM300 M1225 SM50 SM120
CM200 CM300 PM400 GM300 GM338 GM950
GM360 GM3188 GM3688 TK768G TK868G TM471A
Package included: 2pcs
Microphone clip with screws
- Compatitable Models: XPR4350 XPR4550 CDM750 CDM1250 GTX800 GTX900 GM300 M1225 SM50 SM120 CM200 CM300 PM400 GM300 GM338 GM950 GM360 GM3188 GM3688 TK768G TK868G TM471A
- Car Radio Microphone Mounting Clip with screws
- Metal construction Mic microphone holder clip
- Each package include 2 pcs
- Reasonable size to use
Metal MIC HOLDER / Clip - Screw In for CB / Ham Radio - Workman MH2
Workman
Product description
Cb Radio Microphone Clip Holder Metal Three Finger Metal Mic Clip Workman MH2
- CB Radio Microphone Three Finger Metal Clip / Holder
- Screws Included
User questions & answers
| Question: | Would this clip work if your antenea doesn't have the ball at the end |
| Answer: | The clip is for the mic, not for an antenna |
| Question: | Will this mount to the side of any cobra CB |
| Answer: | Yes it should. Will hold 2 way or any standard mic. |
| Question: | will this fit the astatic mics |
| Answer: | Being totally unfamiliar with Astatic brand mics, I cannot accurately answer the question. |
| Question: | Will this mount to the side of any cobra CB |
| Answer: | I'm sure you could screw it into the side. I screwed mine to the dash and it works like it should. |
WORKMAN NF 40 CB RADIO STEREO POWER NOISE FILTER 240w RMS POWER HANDLING
Workman
Product description
WORKMAN NF 40 CB RADIO STEREO POWER NOISE FILTER 240w RMS POWER HANDLING
- STOPS ELECTRICAL INTERFERENCE
- STOPS NOISE ON AUTO POWER SOURCE LEDS
- USED FOR CB, RADIO, POWER AMPLIFIERS, HAM RADIOS
- 240 WATTS RMS POWER HANDLING
- WORKING VOLTAGE IS DC 9-12 volt
User questions & answers
| Question: | My led headlights creates more static on my cb when the lights are on, will this eliminate or reduce the static issue |
| Answer: | I did not find it to help at all. |
| Question: | Will this reduce my inverter noise |
| Answer: | It did not help my noise, can not say same for your situation. We are in an RV and had inverter hum problems and this did not help. |
| Question: | Can you ground it to the battery |
| Answer: | I would not do that. I feel it would be best to isolate the ground to the car body. |
Uniden BWZG1889001 6-Pin to 4-Pin CB Microphone Adapter
Uniden
Product description
Uniden BWZG1889001 6-Pin to 4-Pin CB Microphone Adapter. The product is of good quality. Manufactured by in Taiwan.
- high quality product
- for use with bearcat 880 and bearcat 680
- manufactured in taiwan
- Fit type: Vehicle Specific
User questions & answers
| Question: | Will this work with my Uniden PC |
| Answer: | Yes, it will allow a Cobra/Uniden typer 4 pin mic to work in a PC787, 687, 880, 980SSB, 680. |
| Question: | will this work on a midland |
| Answer: | This will work on any modern CB with the proper input |
| Question: | I have a 4 pin the 2 screws fell out. How do i use that cord in a month how can i use that cord |
| Answer: | You could always call our Customer Service for a replacement cord. 1-800-297-1023. |
| Question: | Will this allow me to use a 4 pin mic on a 6pin cobra blutooth 29lx bt |
| Answer: | Yes |
Redman Cb Made 50 ft RG8X COAX Gray CABLE CB / Ham Radio w/ PL259 Connector
Product description
50` FOOT CB RADIO / HAM ANTENNA COAX CABLE. STANDARD ENDS
- 50` FEET OF RG8X
- PL-259 (UHF) ENDS
- 95% SHIELD
- OEM / USA MADE COAX
- BULK ITEM. NO RETAIL PACKAGING
User questions & answers
| Question: | can this be used on cb radio at home not ham radio |
| Answer: | Yes. I use it for 11 meter Citizen Band Radio at home. It is a great coax for CB no interference with receive or transmit. I'm running a small linear off it that peaks at approx 150 watts and have no problems with it handling it. |
| Question: | Does this cable have a foil shield and good quality braid? The last cable I bought just a had a few strands of wire running along the outer layer |
| Answer: | Not the highest quality and has junk connectors but not bad for making jumpers out of |
ProComm Im-AF Splitter CB AM FM Radio Audio Stereo Antenna MultiPlexor
Procomm
Product description
ProComm Im-AF Splitter CB AM FM Radio Audio Stereo Antenna MultiPlexor
- CB
- AM
- FM
- ANTENNA MULTIPLEXOR
- RADIO AUDIO STEREO
User questions & answers
| Question: | whats the diffrence between this 1 and the 30 dollar 1 they look the same im just trying to hook up my 4 ft firestick for my cb and radio |
| Answer: | If you have a CB antenna installed, then this one uses your CB antenna for both of your CB and AM/FM radios. The $30 one use the OEM antenna that came with your car for your CB and AM/FM radio. However, I would NOT use the $30 one because it may damage your CB radio. The $30 one claims to have a tuner, but people have reported that the tuner doesn't work. Also, OEM antennas aren't designed for CB use. |
| Question: | Says 30A max input. Will my 100A linear damage this unit if put between it and the antenna |
| Answer: | This should work just fine as long as you put the Linear/Amp. between this and the antenna. Then hook this up to the output of your CB like normal. This device will only see the output of the CB, not the Amplifier. |
| Question: | Can one use the single CB antenna to use both the CB and the FM radio simultaniously? Is there anyinterference if it does work |
| Answer: | Yes you can use both simultaneously with no interference or noise. |
| Question: | Where can I find the correct adapters to hook this up to my 07 Jeep Grand Cherokee Antennae and Radio? I intend to keep the stock look and add the CB |
| Answer: | You need to understand that you will NOT be using the stock AM/FM antenna of your car with this unit and hooking a CB up to it.You MUST use a CB antenna, and you will be disconnecting your radio from the stock AM/FM antenna from your radio and using the CB antenna for all three (AM RX / FM RX / CB TX & RX).If you want to use the conventional location of where you have/had your AM/FM antenna, and replace that antenna with a CB antenna, that is possible (although it wont be the best location for a CB antenna, and it might be difficult to tune the CB antenna bad/high SWR, more than 3.0:1). As far as 'adapters' for using this splitter, you won't need one, as the new CB antenna will be connected to a coax with PL-259 connectors (aka: UHF connectors). What you would have to do is find a antenna 'seat' or 'mount' or 'base' that will support your new CB antenna through the same hole as your old AM/FM antenna and still look stock.As far as finding that 'base', I can't help you, but if you keep searching the internet you may find one. Maybe "J C Whitney", or some Jeep Grand Cherokee fan site?Just to be crystal clear, when you use this splitter, you will NOT be using a AM/FM antenna with it.KK4VRE (HAM)/ WQST332 (GMRS)/ KRED333 (CB-A/D)/ KNJ2MB (Monitor) |
Latest Reviews
View all
Queen Blankets
- Updated: 29.05.2023
- Read reviews
Eastwood High Temp Paint
- Updated: 02.01.2023
- Read reviews
Alkaline Filter For Shower
- Updated: 25.04.2023
- Read reviews
Heating Pad For Leg Pain
- Updated: 26.07.2023
- Read reviews
Startech Com Pc Sound Cards
- Updated: 23.02.2023
- Read reviews