4 best monoprice home theater speakers

Product description

Get everything you need for a great sounding home theater speaker setup in a single box! You get four satellite speakers and a center channel speaker for the mid- and high-range audio signals, plus an 8-Inch powered subwoofer to handle the low frequencies. All the speakers come with an attractive black finish and convenient spring-loaded signal connectors. The center speakers use two 3-Inch shielded mid-range cones, while the satellites employ one 3-Inch cone and a 1/2-Inch dome tweeter. However, don't let the small size fool you! These 8 ohm speakers will handle up to 125 watts of power from your home theater receiver at frequencies from 150 Hz to 20 kHz. The subwoofer is powered by a 60 watt (RMS) amplifier, driving a downward firing 8-Inch cone. It can take either line or speaker-level inputs, so can be used with any amplifier, even older amps without dedicated subwoofer outputs. The subwoofer handles frequencies between 50 Hz to 250 Hz and includes adjustable crossover frequency and volume balance controls. Also included in the box are four C brackets for mounting the satellite speakers to the wall and the necessary hardware for mounting the speakers to the brackets. A pair of plastic feet to properly orient the face of the center speaker is also included. Note that you will need to provide your own hardware for mounting the C brackets to the wall or other vertical surface. Don't let the low price fool you! This speaker system sounds great and will fill your room with high-quality, full-spectrum sound! Note: The speaker wire connectors on each unit comfortably accept a maximum 16 gauge speaker wire. For best results use pin-type speaker plugs to make the speaker connections and banana or pin-type plugs to connect the wires to your amplifier.

• Surround yourself in high-fidelity with the Monoprice 5.1-channel Home Theater Speaker System!
• This speaker system features four satellite speakers and a center channel speaker for the mid- and high-range audio signals, plus an 8" powered subwoofer to handle the low frequencies. All the speakers come with an attractive black finish and convenient spring-loaded signal connectors.
• The center speakers use two 3" shielded mid-range cones, while the satellites employ one 3" cone and a 1/2" dome tweeter. However, don't let the small size fool you! These 8 ohm speakers will handle up to 125 watts of power from your home theater receiver at frequencies from 150 Hz to 20 kHz.
• The subwoofer is powered by a 60 watt (RMS) amplifier, driving a downward firing 8" cone. It can take either line or speaker-level inputs, so can be used with any amplifier, even older amps without dedicated subwoofer outputs. The subwoofer handles frequencies between 50 Hz to 250 Hz and includes adjustable crossover frequency and volume balance controls.
• Also included in the box are four C brackets for mounting the satellite speakers to the wall and the necessary hardware for mounting the speakers to the brackets. A pair of plastic feet to properly orient the face of the center speaker is also included. Note that you will need to provide your own hardware for mounting the C brackets to the wall or other vertical surface.

User questions & answers

Question:	What speaker stands work with the Monoprice
Answer:	Any stand will work. I purchased wall mounts for my surround speakers.
Question:	Could I use this with a receiver and what would I need to do to get it to work correctly
Answer:	It will work with any 80-100w/ channel receiver. Connect using banana plugs and 14 gauge speaker wire. Make sure to get the woofer spreaker cable with a Y splitter. Monoprice website sells all the cables you need at a great price. Better than amazon
Question:	Could anyone recommend a set of towers to make this a 7.1 system
Answer:	I would definitely agree. Monoprice sells a set of two of the speakers separately for use on their own as a 2 channel system or as an add on to this 5.1 system to make it 7.1. They even sell the subwoofer separately as well if you ever want to upgrade to a true 7.2 system. Then everything will be perfectly matched. Make sure to get the correct set of two Premium Monoprice speakers. Monoprice also sells a lower quality standard 5.1 surround sound system and a set of two extras of that type as well. If you have the correct set, they will exactly match the speakers in the Monoprice Premium 5.1 surround sound speaker set. I know this because I actually had what I thought was the correct one in my shopping cart only to find out it was the wrong set just before pulling the trigger. So it's an easy mistake to make even when you've done a bunch of research. I hope you enjoy your system. They are absolutely amazing speakers. My family is constantly amazed at how much information and nuance is embedded in soundtracks of our favorite movies and shows that we never heard with our previous home theater system. It's like a completely different experience now. Good luck.
Question:	What are the dimensions of the individual speakers? I'm espescially curious on the size of the center channel
Answer:	The center channel is 4x9.5x4 Height, width, Depth respectively. The Subwoofer:12x10x12, The Satellites are :6x4x4

Product features

Monoprice 5.1 Channel Home Theater Satellite Speakers And Subwoofer - Black

This headphone amplifier features a USB input and a professional level Texas Instruments Digital to Analog Converter (DAC), effectively replacing your sound card without requiring you to open your PC and installing a new card. The high-current output allows it to drive headphones with a wide range of impedances, from 16 ohms to 600 ohms.

The RCA line outputs allow you to send the output to a stereo amplifier or powered speakers for those times when you don't want to use headphones. A set of RCA line inputs allows you to connect an external audio source, such as a CD player, so you can enjoy the advantages of the high-current headphone output with other audio sources.

Product description

The Monoprice premium 5.1.2-Channel immersive home theater system takes your home theater to new heights! Fully compatible with both standard and Dolby Atmos enabled receivers, The 5.1.2 system features two satellite speakers that have been equipped with immersive, upward-firing drivers, enhancing the detail in multichannel, multidimensional soundtracks. Based on the sound signature and components of the popular 10565 Home theater system, The Monoprice premium 5.1.2-Channel immersive home theater system surpasses all expectations for sound quality in a small package!.

• Immersive sound: The immersive, upward-firing Driver adds a new dimension to movie soundtracks, making the sound come alive from all directions and creating a 3D space. The upward-firing Driver Projects sound towards the ceiling, with the ceiling reflecting the sound back down into the listening space. With this system there is no need to install in-ceiling speakers for height channels! This driver arrangement and connectivity is fully compatible with Dolby atmos@enabled receivers and soundtracks
• Powerful subwoofer The powered subwoofer Features an 8" Downward-firing speaker Driven by a beefy 200 watt amplifier. It features a variable crossover from 40—150 Hz and a phase control switch on the back, allowing you Dial in the phase of the subwoofer in relation to the rest of the system The subwoofer is a compact 126" Cabinet, weighs about 20 pounds, and includes both line and speaker level stereo inputs, making it compatible with any amplifier or receiver
• Compact size: the standard satellites measure 430 x 69" X 43 and weigh 2.9 pounds each, making them easy to mount almost anywhere. The satellites with the upward-firing immersive Driver measure 45" X 10.5" X 53 and weigh 29 pounds each. The center channel speaker measures 10.2" X 43 x 43" And weighs 3.0 lbs. Each speaker is equipped with a Universal 1/4"X20 threaded insert Mount
• Buy with confidence: Monoprice not only stands behind every product we sell with a 1 year Replacement warranty, We offer a 30-day money back guarantee as well!
• Quality at a fair price: Monoprice's rugged design and rigid quality control standards deliver high quality products at fair prices

User questions & answers

Question:	Whats the max watts for individule speaker other than the sub
Answer:	I don’t know why you would do that, if you could just pair the earbuds to the content device.
Question:	satilite speakers has 4 speaker ports 2 for atmos, do you connect 2 channels for both the ports to get atmos effect
Answer:	It has an option for head phone jack hook up. 1/8 plug on both end of cord is needed, in my case.
Question:	Is the connection on the back of the subwoofer included with this system,the single rca or the y adapter split cable type
Answer:	yes
Question:	How many watts rms is this system
Answer:	Output is 5 watts x 2

Product features

Monoprice Premium 5.1.2-Ch. Immersive Home Theater System with Subwoofer

Fully compatible with both standard and Dolby Atmos enabled receivers, the 5.1.2 system features two satellite speakers that have been equipped with immersive, upward-firing drivers, enhancing the detail in multichannel, multidimensional soundtracks. Based on the sound signature and components of the popular 10565 home theater system, the Monoprice Premium 5.1.2-Channel Immersive Home Theater System surpasses all expectations for sound quality in a small package!

Product description

Premium Home Theater Center Channel Speaker, Black Get a great sounding center channel speaker to upgrade your current center speaker or to add a second to your system using this Premium Home Theater Center Channel Speaker from Moonrise! This speaker is identical to the center channel speaker included in our Premium 5. 1-Channel Home Theater Speaker System (PID 10565). It features a 3" polypropylene mid-range driver and a 3/4" aluminum dome tweeter. It can handle up 100 watts of power and has an impedance of 8 ohms. The speaker handles frequencies from 110Hz to 20KHz &plasmin; 3dB, with the crossover between the mid-range and tweeter drivers set to 3. 5kHz. It measures about 4. 3" x 10. 2" x 4. 3" (HWD) and weighs 3. 0 lbs.

• Package Dimensions: 17.0 cms (L) x 17.3 cms (W) x 29.0 cms (H)
• Package Quantity: 1
• Product Type: Speakers
• Country Of Origin: China

User questions & answers

Question:	Two way or 3 way
Answer:	It will scratch if you use metal utensils. I use Teflon and wood with no issues! And I store them inside each other and they haven’t scratched.
Question:	what type of connectors are used? looks like RCA inputs, want to hook up to sub conn on soundbar
Answer:	They also say don’t wash in dishwasher, but I still do. I have used all of these pans on high heat. I notice a discoloration a little on the outside bottom but nothing major.
Question:	Does this speaker come with wires
Answer:	This hard-Anodized aluminum cookware set is PTFE(Teflon) PFOA Free, with FDA Approved double nonstick coating, dishwasher safe
Question:	Is this a 4 ohm or 8 ohm speaker
Answer:	Yes, the provided mounting bracket works on 200 x 200, 200 x 100, 100 x 100, and 75 x 75 mounting holes, and plenty of hardware is included.

Product description

This Kevlar in-wall speaker offers the perfect combination of performance and style. The use of aramid fiber for the woofer means that the speaker can hit harder, go lower, and handle more power with significantly less distortion than conventional drivers. The titanium silk dome tweeter produces clean, crisp, and clear highs and mids.







You can fine tune the blend of sound using the built-in high frequency attenuator in case your room is too bright. The metal grille can be painted to match your ceiling. Easy to install with simple hand tools, less time working and more time relaxing.







All Caliber series in-wall and ceiling speakers are sonically matched to provide a uniform sound stage across you entire listening area. Simple two channel listening rooms to full screening rooms with 7.2.4 Atmos and DTS-X immersive cinema systems will benefit from the matched components of the Caliber series installation speakers.







Model: 6816

Frequency Response: 50 Hz ~ 20 kHz

Impedance: 8 ohms

Power Handling Capacity: 100 watts Nominal, 200 watts maximum

Woofer: 9"" Kevlar woven cone with 30 oz. magnet and rubber surround

Midbass: 3"" Kevlar woven cone with 5.4 oz. magnet and rubber surround

Tweeter: 1"" Silk Membrane dome

Sensitivity: 90dB ±2dB (1.0m/2.83V)

Crossover: 12dB per Octave (with -3dB, -6dB Switch)

Cut-Out Dimensions: 12.8"" x 8.7"" 3.6"" (324 x 222 x 91 mm)

Overall Dimensions: 14.1"" x 10.0"" x 3.9"" (357 x 255 x 100 mm)

• DuPont Kevlar fiber cone drivers delivery clean bass reproduction, This lightweight transducer is a natural sound with significantly less distortion than conventional drivers.
• Immerse yourself in airy detailed clarity with defined vocals and dialog from the pivoting titanium Silk dome tweeters of these installed speakers.
• Enjoy caliber speakers as main home theater speakers and whole home house systems or add as Surrounds and immersive sound sources.
• No logo grills add to the minimal look and increases the “wife acceptance factor”.
• Buy confidently with a 30-day money-back guarantee and our 1-year warranty.

User questions & answers

Question:	Are they Bluetooth
Answer:	No they are not Bluetooth.
Question:	does the 10" Subwoofer vibrate the walls and create any weird unwanted sounds
Answer:	I installed mine into new and properly fastened drywall and have no issues with rattling
Question:	my garage is unfinished (studs only) how much of an area do i need to enclose with drywall on the ceiling to make these sound good
Answer:	Most are designed for infinite baffle application. Meaning they do not need a box to sound good. However building boxes for them normally does help the sound
Question:	Will these speakers fit into a stud depth
Answer:	Yes they fit std 3. 1/2" stud depth

Product features

Caliber 8in Fiber In-Wall Speakers 3-Way (pair)

In-wall speakers allow you to expand your listening environment throughout your entire home, as well as removing the clutter of giant box speakers, giving you back your living space. In either case, it's a win-win situation for those who desire high fidelity and those who put emphasis on decor. Featuring a removable and paintable grille, the Caliber series of in-wall speakers are sonically matched to provide a uniform sound stage across your entire listening area. From simple two channel listening rooms to full home theater screening rooms with 7.2.4 Atmos or DTS:X immersive audio technology, your system will benefit from the matched components of the Caliber series speakers.

What's in the box

2x 8" 3-way in-wall speaker with grill, Installation instructions, Cutout template and paint mask, Grill removal tool, Grill putty.

Dupont Kevlar Fiber Cone Driver

Kevlar is very light, rigid, and strong and delivers clean bass reproduction. This lightweight transducer produces a natural sound with significantly less distortion than conventional drivers.

Titanium Silk Dome Tweeters

Titanium silk offers good projection with warm tones. Immerse yourself in airy, detailed clarity with defined vocals and dialog from the pivoting titanium silk dome tweeters of these speakers.

Versatile

Enjoy Caliber series speakers as main home theater speakers, for whole home sound systems, or add them as surrounds in immersive sound systems.